-# Copyright (C) 2014-2016 EDF R&D
+# Copyright (C) 2014-2019 EDF R&D
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
import Config
from salome.geom import geomBuilder
-geompy = geomBuilder.New( Config.theStudy )
+geompy = geomBuilder.New()
from salome.smesh import smeshBuilder
-smesh = smeshBuilder.New( Config.theStudy )
+smesh = smeshBuilder.New()
##########################################################################################################
# Geometric groups definition
TempGEOList = []
- TempNames = []
- for MacroObj in Config.ListObj :
- if group in MacroObj.GroupNames :
- Occurences = IndexMultiOcc(MacroObj.GroupNames, group)
- for Occ in Occurences :
- TempGEOList += MacroObj.GetBorder(Occ)
- GroupGEO.append(geompy.MakeCompound(TempGEOList))
- geompy.addToStudyInFather(FinalCompound,GroupGEO[-1],'GR_'+group)
-
- # Mesh groups definition
- Criterion = smesh.GetCriterion(SMESH.EDGE, SMESH.FT_BelongToGeom,'=',GroupGEO[-1],Tolerance=1e-06)
- #Criterion = smesh.Filter.Criterion(18,39,0,'GR_'+group,'GR_'+group,39,39,1e-06,smesh.EDGE,7)
- MeshCompound.MakeGroupByCriterion(group,Criterion)
-
- StudyBuilder = Config.theStudy.NewBuilder()
- for MeshObj in TempMESHList:
- SO = Config.theStudy.FindObjectIOR(Config.theStudy.ConvertObjectToIOR(MeshObj))
- if SO is not None: StudyBuilder.RemoveObjectWithChildren(SO)
-
- return MeshCompound
+ aFilterManager = smesh.CreateFilterManager()
+ # Building geometric and mesh compounds and groups ##############################################
+ if Config.debug : print("Searching for geometric groups and publishing final compound")
+
+ TempGEOList = []
+ TempMESHList = []
+
+ for MacroObj in Config.ListObj :
+ TempGEOList += MacroObj.GeoChildren
+ TempMESHList += MacroObj.Mesh
+
+ FinalCompound = geompy.MakeCompound(TempGEOList)
+ geompy.addToStudy (FinalCompound,Config.StudyName)
+ MeshCompound = smesh.Concatenate(TempMESHList, 1, 1, 1e-5)
+ MeshCompound.SetName(Config.StudyName)
+
+ GroupGEO = []
+ for group in Config.Groups :
+
+ # Geometric groups definition
+ TempGEOList = []
+ TempNames = []
+ for MacroObj in Config.ListObj :
+ if group in MacroObj.GroupNames :
+ Occurrences = IndexMultiOcc(MacroObj.GroupNames, group)
+ for Occ in Occurrences :
+ TempGEOList += MacroObj.GetBorder(Occ)
+ GroupGEO.append(geompy.MakeCompound(TempGEOList))
+ geompy.addToStudyInFather(FinalCompound,GroupGEO[-1],'GR_'+group)
+
+ # Mesh groups definition
+ Criterion = smesh.GetCriterion(SMESH.EDGE, SMESH.FT_BelongToGeom,'=',GroupGEO[-1],Tolerance=1e-06)
+ #Criterion = smesh.Filter.Criterion(18,39,0,'GR_'+group,'GR_'+group,39,39,1e-06,smesh.EDGE,7)
+ MeshCompound.MakeGroupByCriterion(group,Criterion)
+
+ StudyBuilder = Config.theStudy.NewBuilder()
+ for MeshObj in TempMESHList:
+ SO = Config.theStudy.FindObjectIOR(Config.theStudy.ConvertObjectToIOR(MeshObj))
+ if SO is not None: StudyBuilder.RemoveObjectWithChildren(SO)
+
+ return MeshCompound
+
def IndexMultiOcc (Array,Element) :
"""
for i,GeoObj in enumerate(ObjToPublish) : geompy.addToStudy(GeoObj,"Sub_"+str(i))
def RevolveMesh(MainMesh,**args):
- """
- This function premits to revolute and scale a 2D mesh while transforming the edge
- groups into face groups. Moreover, the function automatically creates the face groups
- corresponding to the symmetry lower and upper faces
- Facultatif arguments are :
- - Center [X,Y,Z], origin being the default
- - Direction [VX,VY,VZ], x-axis being the default
- - AngleDeg or AngleRad : ALPHA, 10 degrees being the default
- - Scale : BETA, no scaling being default
- """
- ################################################################################
- # Reading input arguments and proceeding to defaults if necessary
- ################################################################################
- if 'Center' in args : CenterCoor = [float(Coor) for Coor in args['Center']]
- else :
- print("\nThe coordinates of the center of revolution were not given\nThe origin is used by default.")
- CenterCoor = [0.,0.,0.]
-
- if 'Direction' in args : Direction = [float(Dir) for Dir in args['Direction']]
- else :
- print("\nThe axis vector of revolution was not given\nThe x-axis is used by default.")
- Direction = [1.,0.,0.]
-
- if 'AngleDeg' in args : Angle = float(args['AngleDeg'])*math.pi/180.
- elif 'AngleRad' in args : Angle = float(args['AngleRad'])
- else :
- print("\nThe revolution angle was not given\nAn angle of 10 degrees is used by default.")
- Angle = 10.*math.pi/180.
-
- if 'Scale' in args : Scale = float(args['Scale'])
- else : Scale = 1.
-
-
- # Creating the lower face group LOFAC
- LOFAC = MainMesh.CreateEmptyGroup( SMESH.FACE, 'LOFAC' )
- LOFAC.AddFrom(MainMesh.GetMesh())
-
- GR_Names = MainMesh.GetGroupNames()
- GRs = MainMesh.GetGroups()
- Rev3DMeshGroups = MainMesh.RotationSweepObject2D( MainMesh, SMESH.AxisStruct( CenterCoor[0], CenterCoor[1], CenterCoor[2], Direction[0], Direction[1], Direction[2] ), Angle, 1, 1e-05 ,True)
-
- # Adding an EDGE suffix to the edge groups (to be deleted eventually by the user...)
- for GR in GRs:
- CurrentName = GR.GetName()
- if CurrentName in GR_Names and not(CurrentName=='LOFAC'): # Meaning that this is an old edge group
- GR.SetName(CurrentName+'_EDGE')
-
- # Removing the _rotated prefix from the rotated FACE groups
- for GR in Rev3DMeshGroups:
- CurrentName = GR.GetName()
- if CurrentName.endswith( "_rotated"):
- if CurrentName.startswith( 'LOFAC_' ):
- GR.SetName('VOL')
- else:
- GR.SetName(CurrentName[:-8])
- elif CurrentName == 'LOFAC_top':
- GR.SetName('HIFAC')
- #Index = [ GR_Names[i] in CurrentName for i in range(0,len(GR_Names)) ].index(True)
- #GR.SetName(GR_Names[Index])
-
- # Creating the upper face group HIFAC
- ALLFAC = MainMesh.CreateEmptyGroup( SMESH.FACE, 'ALLFAC' )
- ALLFAC.AddFrom(MainMesh.GetMesh())
-
- #HIFAC = MainMesh.GetMesh().CutListOfGroups( [ ALLFAC ], [LOFAC] + [ MeshGroup for MeshGroup in Rev3DMeshGroups if not(MeshGroup.GetName()=='VOL') ], 'HIFAC' )
- #HIFAC = MainMesh.GetMesh().CutListOfGroups( [ ALLFAC ], [LOFAC] + [ MeshGroup for MeshGroup in Rev3DMeshGroups if ( not(MeshGroup.GetName()=='VOL') and MeshGroup.GetType() == SMESH.FACE )], 'HIFAC' )
-
- # Scaling down the mesh to meter units
- if not(Scale==1.):
- MeshEditor = MainMesh.GetMeshEditor()
- MeshEditor.Scale( MainMesh.GetMesh(), SMESH.PointStruct( 0, 0, 0 ) ,[ Scale, Scale, Scale ], 0 )
-
-
+ """
+ This function permits to revolute and scale a 2D mesh while transforming the edge
+ groups into face groups. Moreover, the function automatically creates the face groups
+ corresponding to the symmetry lower and upper faces
+ Facultatif arguments are :
+ - Center [X,Y,Z], origin being the default
+ - Direction [VX,VY,VZ], x-axis being the default
+ - AngleDeg or AngleRad : ALPHA, 10 degrees being the default
+ - Scale : BETA, no scaling being default
+ """
+ ################################################################################
+ # Reading input arguments and proceeding to defaults if necessary
+ ################################################################################
+ if 'Center' in args : CenterCoor = [float(Coor) for Coor in args['Center']]
+ else :
+ print("\nThe coordinates of the center of revolution were not given\nThe origin is used by default.")
+ CenterCoor = [0.,0.,0.]
+
+ if 'Direction' in args : Direction = [float(Dir) for Dir in args['Direction']]
+ else :
+ print("\nThe axis vector of revolution was not given\nThe x-axis is used by default.")
+ Direction = [1.,0.,0.]
+
+ if 'AngleDeg' in args : Angle = float(args['AngleDeg'])*math.pi/180.
+ elif 'AngleRad' in args : Angle = float(args['AngleRad'])
+ else :
+ print("\nThe revolution angle was not given\nAn angle of 10 degrees is used by default.")
+ Angle = 10.*math.pi/180.
+
+ if 'Scale' in args : Scale = float(args['Scale'])
+ else : Scale = 1.
+
+
+ # Creating the lower face group LOFAC
+ LOFAC = MainMesh.CreateEmptyGroup( SMESH.FACE, 'LOFAC' )
+ LOFAC.AddFrom(MainMesh.GetMesh())
+
+ GR_Names = MainMesh.GetGroupNames()
+ GRs = MainMesh.GetGroups()
+ Rev3DMeshGroups = MainMesh.RotationSweepObject2D( MainMesh, SMESH.AxisStruct( CenterCoor[0], CenterCoor[1], CenterCoor[2], Direction[0], Direction[1], Direction[2] ), Angle, 1, 1e-05 ,True)
+
+ # Adding an EDGE suffix to the edge groups (to be deleted eventually by the user...)
+ for GR in GRs:
+ CurrentName = GR.GetName()
+ if CurrentName in GR_Names and not(CurrentName=='LOFAC'): # Meaning that this is an old edge group
+ GR.SetName(CurrentName+'_EDGE')
+
+ # Removing the _rotated prefix from the rotated FACE groups
+ for GR in Rev3DMeshGroups:
+ CurrentName = GR.GetName()
+ if CurrentName.endswith( "_rotated"):
+ if CurrentName.startswith( 'LOFAC_' ):
+ GR.SetName('VOL')
+ else:
+ GR.SetName(CurrentName[:-8])
+ elif CurrentName == 'LOFAC_top':
+ GR.SetName('HIFAC')
+ #Index = [ GR_Names[i] in CurrentName for i in range(0,len(GR_Names)) ].index(True)
+ #GR.SetName(GR_Names[Index])
+
+ # Creating the upper face group HIFAC
+ ALLFAC = MainMesh.CreateEmptyGroup( SMESH.FACE, 'ALLFAC' )
+ ALLFAC.AddFrom(MainMesh.GetMesh())
+
+ #HIFAC = MainMesh.GetMesh().CutListOfGroups( [ ALLFAC ], [LOFAC] + [ MeshGroup for MeshGroup in Rev3DMeshGroups if not(MeshGroup.GetName()=='VOL') ], 'HIFAC' )
+ #HIFAC = MainMesh.GetMesh().CutListOfGroups( [ ALLFAC ], [LOFAC] + [ MeshGroup for MeshGroup in Rev3DMeshGroups if ( not(MeshGroup.GetName()=='VOL') and MeshGroup.GetType() == SMESH.FACE )], 'HIFAC' )
+
+ # Scaling down the mesh to meter units
+ if not(Scale==1.):
+ MeshEditor = MainMesh.GetMeshEditor()
+ MeshEditor.Scale( MainMesh.GetMesh(), SMESH.PointStruct( 0, 0, 0 ) ,[ Scale, Scale, Scale ], 0 )
+
+
def ExtrudeMesh(MainMesh,**args):
- """
- This function premits to extrude and scale a 2D mesh while transforming the edge
- groups into face groups. Moreover, the function automatically creates the face groups
- corresponding to the symmetry lower and upper faces
- Facultatif arguments are :
- - Direction [VX,VY,VZ], z-axis being default
- - Distance : D, default is 1
- - NSteps : the object will be extruded by NSteps*Distance, default is Nsteps = 1
- - Scale : BETA, no scaling being default
- """
- ################################################################################
- # Reading input arguments and proceeding to defaults if necessary
- ################################################################################
- if 'Distance' in args : Distance = float(args['Distance'])
- else :
- print("\nThe extrusion distance was not given\nA default value of 1 is used.")
- Distance = 1.
-
- if 'Direction' in args : Direction = NormalizeVector([float(Dir) for Dir in args['Direction']],Distance)
- else :
- print("\nThe extrusion vector of revolution was not given\nThe z-axis is used by default.")
- Direction = NormalizeVector([0.,0.,1.],Distance)
-
- if 'Scale' in args : Scale = float(args['Scale'])
- else : Scale = 1.
-
- if 'NSteps' in args : NSteps = int(args['NSteps'])
- else : NSteps = 1
-
- # Creating the lower face group LOFAC
- LOFAC = MainMesh.CreateEmptyGroup( SMESH.FACE, 'LOFAC' )
- LOFAC.AddFrom(MainMesh.GetMesh())
-
- GR_Names = MainMesh.GetGroupNames()
- GRs = MainMesh.GetGroups()
- Ext3DMeshGroups = MainMesh.ExtrusionSweepObject2D(MainMesh,SMESH.DirStruct(SMESH.PointStruct(Direction[0],Direction[1],Direction[2])), NSteps, True)
-
- # Adding an EDGE suffix to the edge groups (to be deleted eventually by the user...)
- for GR in GRs:
- CurrentName = GR.GetName()
- if CurrentName in GR_Names and not(CurrentName=='LOFAC'): # Meaning that this is an old edge group
- GR.SetName(CurrentName+'_EDGE')
-
- # Removing the _extruded suffix from the extruded FACE groups
- for GR in Ext3DMeshGroups:
- CurrentName = GR.GetName()
- if CurrentName.endswith( "_extruded"):
- if CurrentName.startswith( 'LOFAC_' ):
- GR.SetName('VOL')
- else:
- GR.SetName(CurrentName[:-9])
- elif CurrentName == 'LOFAC_top':
- GR.SetName('HIFAC')
-
- # Creating the upper face group HIFAC
- ALLFAC = MainMesh.CreateEmptyGroup( SMESH.FACE, 'ALLFAC' )
- ALLFAC.AddFrom(MainMesh.GetMesh())
-
- #HIFAC = MainMesh.GetMesh().CutListOfGroups( [ ALLFAC ], [LOFAC] + [ MeshGroup for MeshGroup in Ext3DMeshGroups if not(MeshGroup.GetName()=='VOL') ], 'HIFAC' )
-
- # Scaling down the mesh to meter units
- if not(Scale==1.):
- MeshEditor = MainMesh.GetMeshEditor()
- MeshEditor.Scale( MainMesh.GetMesh(), SMESH.PointStruct( 0, 0, 0 ) ,[ Scale, Scale, Scale ], 0 )
-
-
+ """
+ This function permits to extrude and scale a 2D mesh while transforming the edge
+ groups into face groups. Moreover, the function automatically creates the face groups
+ corresponding to the symmetry lower and upper faces
+ Facultatif arguments are :
+ - Direction [VX,VY,VZ], z-axis being default
+ - Distance : D, default is 1
+ - NSteps : the object will be extruded by NSteps*Distance, default is Nsteps = 1
+ - Scale : BETA, no scaling being default
+ """
+ ################################################################################
+ # Reading input arguments and proceeding to defaults if necessary
+ ################################################################################
+ if 'Distance' in args : Distance = float(args['Distance'])
+ else :
+ print("\nThe extrusion distance was not given\nA default value of 1 is used.")
+ Distance = 1.
+
+ if 'Direction' in args : Direction = NormalizeVector([float(Dir) for Dir in args['Direction']],Distance)
+ else :
+ print("\nThe extrusion vector of revolution was not given\nThe z-axis is used by default.")
+ Direction = NormalizeVector([0.,0.,1.],Distance)
+
+ if 'Scale' in args : Scale = float(args['Scale'])
+ else : Scale = 1.
+
+ if 'NSteps' in args : NSteps = int(args['NSteps'])
+ else : NSteps = 1
+
+ # Creating the lower face group LOFAC
+ LOFAC = MainMesh.CreateEmptyGroup( SMESH.FACE, 'LOFAC' )
+ LOFAC.AddFrom(MainMesh.GetMesh())
+
+ GR_Names = MainMesh.GetGroupNames()
+ GRs = MainMesh.GetGroups()
+ Ext3DMeshGroups = MainMesh.ExtrusionSweepObject2D(MainMesh,SMESH.DirStruct(SMESH.PointStruct(Direction[0],Direction[1],Direction[2])), NSteps, True)
+
+ # Adding an EDGE suffix to the edge groups (to be deleted eventually by the user...)
+ for GR in GRs:
+ CurrentName = GR.GetName()
+ if CurrentName in GR_Names and not(CurrentName=='LOFAC'): # Meaning that this is an old edge group
+ GR.SetName(CurrentName+'_EDGE')
+
+ # Removing the _extruded suffix from the extruded FACE groups
+ for GR in Ext3DMeshGroups:
+ CurrentName = GR.GetName()
+ if CurrentName.endswith( "_extruded"):
+ if CurrentName.startswith( 'LOFAC_' ):
+ GR.SetName('VOL')
+ else:
+ GR.SetName(CurrentName[:-9])
+ elif CurrentName == 'LOFAC_top':
+ GR.SetName('HIFAC')
+
+ # Creating the upper face group HIFAC
+ ALLFAC = MainMesh.CreateEmptyGroup( SMESH.FACE, 'ALLFAC' )
+ ALLFAC.AddFrom(MainMesh.GetMesh())
+
+ #HIFAC = MainMesh.GetMesh().CutListOfGroups( [ ALLFAC ], [LOFAC] + [ MeshGroup for MeshGroup in Ext3DMeshGroups if not(MeshGroup.GetName()=='VOL') ], 'HIFAC' )
+
+ # Scaling down the mesh to meter units
+ if not(Scale==1.):
+ MeshEditor = MainMesh.GetMeshEditor()
+ MeshEditor.Scale( MainMesh.GetMesh(), SMESH.PointStruct( 0, 0, 0 ) ,[ Scale, Scale, Scale ], 0 )
+
+
def NormalizeVector (V,Norm):
"""
This function returns a normalized vector (magnitude = Norm), parallel to the entered one
