X-Git-Url: http://git.salome-platform.org/gitweb/?p=modules%2Fsmesh.git;a=blobdiff_plain;f=src%2FTools%2FMacMesh%2FMacMesh%2FPublishGroups.py;h=0f9f56b1651b869a0afae82ae2b7cde9a21e2ca5;hp=52dcf728abfff3bb433f6f7294e746ea8144b4dd;hb=6d32f944a0a115b6419184c50b57bf7c4eef5786;hpb=442fd64c19a6e27a339ca36264c15ec91732cf32 diff --git a/src/Tools/MacMesh/MacMesh/PublishGroups.py b/src/Tools/MacMesh/MacMesh/PublishGroups.py index 52dcf728a..0f9f56b16 100644 --- a/src/Tools/MacMesh/MacMesh/PublishGroups.py +++ b/src/Tools/MacMesh/MacMesh/PublishGroups.py @@ -1,4 +1,4 @@ -# Copyright (C) 2014-2016 EDF R&D +# Copyright (C) 2014-2019 EDF R&D # # This library is free software; you can redistribute it and/or # modify it under the terms of the GNU Lesser General Public @@ -23,10 +23,10 @@ import math import Config from salome.geom import geomBuilder -geompy = geomBuilder.New( Config.theStudy ) +geompy = geomBuilder.New() from salome.smesh import smeshBuilder -smesh = smeshBuilder.New( Config.theStudy ) +smesh = smeshBuilder.New() ########################################################################################################## @@ -53,27 +53,49 @@ def PublishGroups (): # Geometric groups definition TempGEOList = [] - TempNames = [] - for MacroObj in Config.ListObj : - if group in MacroObj.GroupNames : - Occurences = IndexMultiOcc(MacroObj.GroupNames, group) - for Occ in Occurences : - TempGEOList += MacroObj.GetBorder(Occ) - GroupGEO.append(geompy.MakeCompound(TempGEOList)) - geompy.addToStudyInFather(FinalCompound,GroupGEO[-1],'GR_'+group) - - # Mesh groups definition - Criterion = smesh.GetCriterion(SMESH.EDGE, SMESH.FT_BelongToGeom,'=',GroupGEO[-1],Tolerance=1e-06) - #Criterion = smesh.Filter.Criterion(18,39,0,'GR_'+group,'GR_'+group,39,39,1e-06,smesh.EDGE,7) - MeshCompound.MakeGroupByCriterion(group,Criterion) - - StudyBuilder = Config.theStudy.NewBuilder() - for MeshObj in TempMESHList: - SO = Config.theStudy.FindObjectIOR(Config.theStudy.ConvertObjectToIOR(MeshObj)) - if SO is not None: StudyBuilder.RemoveObjectWithChildren(SO) - - return MeshCompound + aFilterManager = smesh.CreateFilterManager() + # Building geometric and mesh compounds and groups ############################################## + if Config.debug : print("Searching for geometric groups and publishing final compound") + + TempGEOList = [] + TempMESHList = [] + + for MacroObj in Config.ListObj : + TempGEOList += MacroObj.GeoChildren + TempMESHList += MacroObj.Mesh + + FinalCompound = geompy.MakeCompound(TempGEOList) + geompy.addToStudy (FinalCompound,Config.StudyName) + MeshCompound = smesh.Concatenate(TempMESHList, 1, 1, 1e-5) + MeshCompound.SetName(Config.StudyName) + + GroupGEO = [] + for group in Config.Groups : + + # Geometric groups definition + TempGEOList = [] + TempNames = [] + for MacroObj in Config.ListObj : + if group in MacroObj.GroupNames : + Occurrences = IndexMultiOcc(MacroObj.GroupNames, group) + for Occ in Occurrences : + TempGEOList += MacroObj.GetBorder(Occ) + GroupGEO.append(geompy.MakeCompound(TempGEOList)) + geompy.addToStudyInFather(FinalCompound,GroupGEO[-1],'GR_'+group) + + # Mesh groups definition + Criterion = smesh.GetCriterion(SMESH.EDGE, SMESH.FT_BelongToGeom,'=',GroupGEO[-1],Tolerance=1e-06) + #Criterion = smesh.Filter.Criterion(18,39,0,'GR_'+group,'GR_'+group,39,39,1e-06,smesh.EDGE,7) + MeshCompound.MakeGroupByCriterion(group,Criterion) + + StudyBuilder = Config.theStudy.NewBuilder() + for MeshObj in TempMESHList: + SO = Config.theStudy.FindObjectIOR(Config.theStudy.ConvertObjectToIOR(MeshObj)) + if SO is not None: StudyBuilder.RemoveObjectWithChildren(SO) + + return MeshCompound + def IndexMultiOcc (Array,Element) : """ @@ -96,146 +118,146 @@ def Publish (ObjToPublish): for i,GeoObj in enumerate(ObjToPublish) : geompy.addToStudy(GeoObj,"Sub_"+str(i)) def RevolveMesh(MainMesh,**args): - """ - This function premits to revolute and scale a 2D mesh while transforming the edge - groups into face groups. Moreover, the function automatically creates the face groups - corresponding to the symmetry lower and upper faces - Facultatif arguments are : - - Center [X,Y,Z], origin being the default - - Direction [VX,VY,VZ], x-axis being the default - - AngleDeg or AngleRad : ALPHA, 10 degrees being the default - - Scale : BETA, no scaling being default - """ - ################################################################################ - # Reading input arguments and proceeding to defaults if necessary - ################################################################################ - if 'Center' in args : CenterCoor = [float(Coor) for Coor in args['Center']] - else : - print("\nThe coordinates of the center of revolution were not given\nThe origin is used by default.") - CenterCoor = [0.,0.,0.] - - if 'Direction' in args : Direction = [float(Dir) for Dir in args['Direction']] - else : - print("\nThe axis vector of revolution was not given\nThe x-axis is used by default.") - Direction = [1.,0.,0.] - - if 'AngleDeg' in args : Angle = float(args['AngleDeg'])*math.pi/180. - elif 'AngleRad' in args : Angle = float(args['AngleRad']) - else : - print("\nThe revolution angle was not given\nAn angle of 10 degrees is used by default.") - Angle = 10.*math.pi/180. - - if 'Scale' in args : Scale = float(args['Scale']) - else : Scale = 1. - - - # Creating the lower face group LOFAC - LOFAC = MainMesh.CreateEmptyGroup( SMESH.FACE, 'LOFAC' ) - LOFAC.AddFrom(MainMesh.GetMesh()) - - GR_Names = MainMesh.GetGroupNames() - GRs = MainMesh.GetGroups() - Rev3DMeshGroups = MainMesh.RotationSweepObject2D( MainMesh, SMESH.AxisStruct( CenterCoor[0], CenterCoor[1], CenterCoor[2], Direction[0], Direction[1], Direction[2] ), Angle, 1, 1e-05 ,True) - - # Adding an EDGE suffix to the edge groups (to be deleted eventually by the user...) - for GR in GRs: - CurrentName = GR.GetName() - if CurrentName in GR_Names and not(CurrentName=='LOFAC'): # Meaning that this is an old edge group - GR.SetName(CurrentName+'_EDGE') - - # Removing the _rotated prefix from the rotated FACE groups - for GR in Rev3DMeshGroups: - CurrentName = GR.GetName() - if CurrentName.endswith( "_rotated"): - if CurrentName.startswith( 'LOFAC_' ): - GR.SetName('VOL') - else: - GR.SetName(CurrentName[:-8]) - elif CurrentName == 'LOFAC_top': - GR.SetName('HIFAC') - #Index = [ GR_Names[i] in CurrentName for i in range(0,len(GR_Names)) ].index(True) - #GR.SetName(GR_Names[Index]) - - # Creating the upper face group HIFAC - ALLFAC = MainMesh.CreateEmptyGroup( SMESH.FACE, 'ALLFAC' ) - ALLFAC.AddFrom(MainMesh.GetMesh()) - - #HIFAC = MainMesh.GetMesh().CutListOfGroups( [ ALLFAC ], [LOFAC] + [ MeshGroup for MeshGroup in Rev3DMeshGroups if not(MeshGroup.GetName()=='VOL') ], 'HIFAC' ) - #HIFAC = MainMesh.GetMesh().CutListOfGroups( [ ALLFAC ], [LOFAC] + [ MeshGroup for MeshGroup in Rev3DMeshGroups if ( not(MeshGroup.GetName()=='VOL') and MeshGroup.GetType() == SMESH.FACE )], 'HIFAC' ) - - # Scaling down the mesh to meter units - if not(Scale==1.): - MeshEditor = MainMesh.GetMeshEditor() - MeshEditor.Scale( MainMesh.GetMesh(), SMESH.PointStruct( 0, 0, 0 ) ,[ Scale, Scale, Scale ], 0 ) - - + """ + This function permits to revolute and scale a 2D mesh while transforming the edge + groups into face groups. Moreover, the function automatically creates the face groups + corresponding to the symmetry lower and upper faces + Facultatif arguments are : + - Center [X,Y,Z], origin being the default + - Direction [VX,VY,VZ], x-axis being the default + - AngleDeg or AngleRad : ALPHA, 10 degrees being the default + - Scale : BETA, no scaling being default + """ + ################################################################################ + # Reading input arguments and proceeding to defaults if necessary + ################################################################################ + if 'Center' in args : CenterCoor = [float(Coor) for Coor in args['Center']] + else : + print("\nThe coordinates of the center of revolution were not given\nThe origin is used by default.") + CenterCoor = [0.,0.,0.] + + if 'Direction' in args : Direction = [float(Dir) for Dir in args['Direction']] + else : + print("\nThe axis vector of revolution was not given\nThe x-axis is used by default.") + Direction = [1.,0.,0.] + + if 'AngleDeg' in args : Angle = float(args['AngleDeg'])*math.pi/180. + elif 'AngleRad' in args : Angle = float(args['AngleRad']) + else : + print("\nThe revolution angle was not given\nAn angle of 10 degrees is used by default.") + Angle = 10.*math.pi/180. + + if 'Scale' in args : Scale = float(args['Scale']) + else : Scale = 1. + + + # Creating the lower face group LOFAC + LOFAC = MainMesh.CreateEmptyGroup( SMESH.FACE, 'LOFAC' ) + LOFAC.AddFrom(MainMesh.GetMesh()) + + GR_Names = MainMesh.GetGroupNames() + GRs = MainMesh.GetGroups() + Rev3DMeshGroups = MainMesh.RotationSweepObject2D( MainMesh, SMESH.AxisStruct( CenterCoor[0], CenterCoor[1], CenterCoor[2], Direction[0], Direction[1], Direction[2] ), Angle, 1, 1e-05 ,True) + + # Adding an EDGE suffix to the edge groups (to be deleted eventually by the user...) + for GR in GRs: + CurrentName = GR.GetName() + if CurrentName in GR_Names and not(CurrentName=='LOFAC'): # Meaning that this is an old edge group + GR.SetName(CurrentName+'_EDGE') + + # Removing the _rotated prefix from the rotated FACE groups + for GR in Rev3DMeshGroups: + CurrentName = GR.GetName() + if CurrentName.endswith( "_rotated"): + if CurrentName.startswith( 'LOFAC_' ): + GR.SetName('VOL') + else: + GR.SetName(CurrentName[:-8]) + elif CurrentName == 'LOFAC_top': + GR.SetName('HIFAC') + #Index = [ GR_Names[i] in CurrentName for i in range(0,len(GR_Names)) ].index(True) + #GR.SetName(GR_Names[Index]) + + # Creating the upper face group HIFAC + ALLFAC = MainMesh.CreateEmptyGroup( SMESH.FACE, 'ALLFAC' ) + ALLFAC.AddFrom(MainMesh.GetMesh()) + + #HIFAC = MainMesh.GetMesh().CutListOfGroups( [ ALLFAC ], [LOFAC] + [ MeshGroup for MeshGroup in Rev3DMeshGroups if not(MeshGroup.GetName()=='VOL') ], 'HIFAC' ) + #HIFAC = MainMesh.GetMesh().CutListOfGroups( [ ALLFAC ], [LOFAC] + [ MeshGroup for MeshGroup in Rev3DMeshGroups if ( not(MeshGroup.GetName()=='VOL') and MeshGroup.GetType() == SMESH.FACE )], 'HIFAC' ) + + # Scaling down the mesh to meter units + if not(Scale==1.): + MeshEditor = MainMesh.GetMeshEditor() + MeshEditor.Scale( MainMesh.GetMesh(), SMESH.PointStruct( 0, 0, 0 ) ,[ Scale, Scale, Scale ], 0 ) + + def ExtrudeMesh(MainMesh,**args): - """ - This function premits to extrude and scale a 2D mesh while transforming the edge - groups into face groups. Moreover, the function automatically creates the face groups - corresponding to the symmetry lower and upper faces - Facultatif arguments are : - - Direction [VX,VY,VZ], z-axis being default - - Distance : D, default is 1 - - NSteps : the object will be extruded by NSteps*Distance, default is Nsteps = 1 - - Scale : BETA, no scaling being default - """ - ################################################################################ - # Reading input arguments and proceeding to defaults if necessary - ################################################################################ - if 'Distance' in args : Distance = float(args['Distance']) - else : - print("\nThe extrusion distance was not given\nA default value of 1 is used.") - Distance = 1. - - if 'Direction' in args : Direction = NormalizeVector([float(Dir) for Dir in args['Direction']],Distance) - else : - print("\nThe extrusion vector of revolution was not given\nThe z-axis is used by default.") - Direction = NormalizeVector([0.,0.,1.],Distance) - - if 'Scale' in args : Scale = float(args['Scale']) - else : Scale = 1. - - if 'NSteps' in args : NSteps = int(args['NSteps']) - else : NSteps = 1 - - # Creating the lower face group LOFAC - LOFAC = MainMesh.CreateEmptyGroup( SMESH.FACE, 'LOFAC' ) - LOFAC.AddFrom(MainMesh.GetMesh()) - - GR_Names = MainMesh.GetGroupNames() - GRs = MainMesh.GetGroups() - Ext3DMeshGroups = MainMesh.ExtrusionSweepObject2D(MainMesh,SMESH.DirStruct(SMESH.PointStruct(Direction[0],Direction[1],Direction[2])), NSteps, True) - - # Adding an EDGE suffix to the edge groups (to be deleted eventually by the user...) - for GR in GRs: - CurrentName = GR.GetName() - if CurrentName in GR_Names and not(CurrentName=='LOFAC'): # Meaning that this is an old edge group - GR.SetName(CurrentName+'_EDGE') - - # Removing the _extruded suffix from the extruded FACE groups - for GR in Ext3DMeshGroups: - CurrentName = GR.GetName() - if CurrentName.endswith( "_extruded"): - if CurrentName.startswith( 'LOFAC_' ): - GR.SetName('VOL') - else: - GR.SetName(CurrentName[:-9]) - elif CurrentName == 'LOFAC_top': - GR.SetName('HIFAC') - - # Creating the upper face group HIFAC - ALLFAC = MainMesh.CreateEmptyGroup( SMESH.FACE, 'ALLFAC' ) - ALLFAC.AddFrom(MainMesh.GetMesh()) - - #HIFAC = MainMesh.GetMesh().CutListOfGroups( [ ALLFAC ], [LOFAC] + [ MeshGroup for MeshGroup in Ext3DMeshGroups if not(MeshGroup.GetName()=='VOL') ], 'HIFAC' ) - - # Scaling down the mesh to meter units - if not(Scale==1.): - MeshEditor = MainMesh.GetMeshEditor() - MeshEditor.Scale( MainMesh.GetMesh(), SMESH.PointStruct( 0, 0, 0 ) ,[ Scale, Scale, Scale ], 0 ) - - + """ + This function permits to extrude and scale a 2D mesh while transforming the edge + groups into face groups. Moreover, the function automatically creates the face groups + corresponding to the symmetry lower and upper faces + Facultatif arguments are : + - Direction [VX,VY,VZ], z-axis being default + - Distance : D, default is 1 + - NSteps : the object will be extruded by NSteps*Distance, default is Nsteps = 1 + - Scale : BETA, no scaling being default + """ + ################################################################################ + # Reading input arguments and proceeding to defaults if necessary + ################################################################################ + if 'Distance' in args : Distance = float(args['Distance']) + else : + print("\nThe extrusion distance was not given\nA default value of 1 is used.") + Distance = 1. + + if 'Direction' in args : Direction = NormalizeVector([float(Dir) for Dir in args['Direction']],Distance) + else : + print("\nThe extrusion vector of revolution was not given\nThe z-axis is used by default.") + Direction = NormalizeVector([0.,0.,1.],Distance) + + if 'Scale' in args : Scale = float(args['Scale']) + else : Scale = 1. + + if 'NSteps' in args : NSteps = int(args['NSteps']) + else : NSteps = 1 + + # Creating the lower face group LOFAC + LOFAC = MainMesh.CreateEmptyGroup( SMESH.FACE, 'LOFAC' ) + LOFAC.AddFrom(MainMesh.GetMesh()) + + GR_Names = MainMesh.GetGroupNames() + GRs = MainMesh.GetGroups() + Ext3DMeshGroups = MainMesh.ExtrusionSweepObject2D(MainMesh,SMESH.DirStruct(SMESH.PointStruct(Direction[0],Direction[1],Direction[2])), NSteps, True) + + # Adding an EDGE suffix to the edge groups (to be deleted eventually by the user...) + for GR in GRs: + CurrentName = GR.GetName() + if CurrentName in GR_Names and not(CurrentName=='LOFAC'): # Meaning that this is an old edge group + GR.SetName(CurrentName+'_EDGE') + + # Removing the _extruded suffix from the extruded FACE groups + for GR in Ext3DMeshGroups: + CurrentName = GR.GetName() + if CurrentName.endswith( "_extruded"): + if CurrentName.startswith( 'LOFAC_' ): + GR.SetName('VOL') + else: + GR.SetName(CurrentName[:-9]) + elif CurrentName == 'LOFAC_top': + GR.SetName('HIFAC') + + # Creating the upper face group HIFAC + ALLFAC = MainMesh.CreateEmptyGroup( SMESH.FACE, 'ALLFAC' ) + ALLFAC.AddFrom(MainMesh.GetMesh()) + + #HIFAC = MainMesh.GetMesh().CutListOfGroups( [ ALLFAC ], [LOFAC] + [ MeshGroup for MeshGroup in Ext3DMeshGroups if not(MeshGroup.GetName()=='VOL') ], 'HIFAC' ) + + # Scaling down the mesh to meter units + if not(Scale==1.): + MeshEditor = MainMesh.GetMeshEditor() + MeshEditor.Scale( MainMesh.GetMesh(), SMESH.PointStruct( 0, 0, 0 ) ,[ Scale, Scale, Scale ], 0 ) + + def NormalizeVector (V,Norm): """ This function returns a normalized vector (magnitude = Norm), parallel to the entered one