src/SMESHGUI/SMESH_msg_en.ts

   1 <!DOCTYPE TS>
   2 <TS version="1.1" >
   3     <context>
   4         <name>@default</name>
   5         <message>
   6             <source>AREA_ELEMENTS</source>
   7             <translation>Area</translation>
   8         </message>
   9         <message>
  10             <source>ASPECTRATIO_3D_ELEMENTS</source>
  11             <translation>Aspect Ratio 3D</translation>
  12         </message>
  13         <message>
  14             <source>ASPECTRATIO_ELEMENTS</source>
  15             <translation>Aspect Ratio</translation>
  16         </message>
  17         <message>
  18             <source>COL_ALGO_HEADER</source>
  19             <translation>Algorithm</translation>
  20         </message>
  21         <message>
  22             <source>COL_ERROR_HEADER</source>
  23             <translation>Error</translation>
  24         </message>
  25         <message>
  26             <source>COL_SHAPE_HEADER</source>
  27             <translation>SubShape</translation>
  28         </message>
  29         <message>
  30             <source>COMPERR_ALGO_FAILED</source>
  31             <translation>Algorithm failed</translation>
  32         </message>
  33         <message>
  34             <source>COMPERR_BAD_INPUT_MESH</source>
  35             <translation>Invalid input mesh</translation>
  36         </message>
  37         <message>
  38             <source>COMPERR_BAD_SHAPE</source>
  39             <translation>Unexpected geometry</translation>
  40         </message>
  41         <message>
  42             <source>COMPERR_EXCEPTION</source>
  43             <translation>Unknown exception</translation>
  44         </message>
  45         <message>
  46             <source>COMPERR_MEMORY_PB</source>
  47             <translation>Memory allocation problem</translation>
  48         </message>
  49         <message>
  50             <source>COMPERR_OCC_EXCEPTION</source>
  51             <translation>OCC exception</translation>
  52         </message>
  53         <message>
  54             <source>COMPERR_OK</source>
  55             <translation>No errors</translation>
  56         </message>
  57         <message>
  58             <source>COMPERR_SLM_EXCEPTION</source>
  59             <translation>SALOME exception</translation>
  60         </message>
  61         <message>
  62             <source>COMPERR_STD_EXCEPTION</source>
  63             <translation>std::exception</translation>
  64         </message>
  65         <message>
  66             <source>DIRECT_GEOM_SELECTION</source>
  67             <translation>Direct geometry selection</translation>
  68         </message>
  69         <message>
  70             <source>ELEMENT_ID</source>
  71             <translation>Element ID</translation>
  72         </message>
  73         <message>
  74             <source>FREE_BORDERS</source>
  75             <translation>Free Borders</translation>
  76         </message>
  77         <message>
  78             <source>GEOMETRY_NAME</source>
  79             <translation>Geometry name</translation>
  80         </message>
  81         <message>
  82             <source>GEOM_BY_MESH_ELEM_SELECTION</source>
  83             <translation>Find geometry by mesh element selection</translation>
  84         </message>
  85         <message>
  86             <source>GLOBAL_ALGO</source>
  87             <translation>Global</translation>
  88         </message>
  89         <message>
  90             <source>INF_SELECT_OBJECT</source>
  91             <translation>Select an object</translation>
  92         </message>
  93         <message>
  94             <source>LENGTH2D_EDGES</source>
  95             <translation>Length 2D</translation>
  96         </message>
  97         <message>
  98             <source>LENGTH_EDGES</source>
  99             <translation>Length</translation>
 100         </message>
 101         <message>
 102             <source>LOCAL_ALGO</source>
 103             <translation>Local</translation>
 104         </message>
 105         <message>
 106             <source>MEN_ADD</source>
 107             <translation>Add</translation>
 108         </message>
 109         <message>
 110             <source>MEN_ADV_INFO</source>
 111             <translation>Advanced Mesh Infos</translation>
 112         </message>
 113         <message>
 114             <source>MEN_ALL</source>
 115             <translation>All</translation>
 116         </message>
 117         <message>
 118             <source>MEN_AREA</source>
 119             <translation>Area</translation>
 120         </message>
 121         <message>
 122             <source>MEN_ASPECT</source>
 123             <translation>Aspect Ratio</translation>
 124         </message>
 125         <message>
 126             <source>MEN_ASPECT_3D</source>
 127             <translation>Aspect Ratio 3D</translation>
 128         </message>
 129         <message>
 130             <source>MEN_AUTO_COLOR</source>
 131             <translation>Auto color</translation>
 132         </message>
 133         <message>
 134             <source>MEN_AUTO_UPD</source>
 135             <translation>Automatic update</translation>
 136         </message>
 137         <message>
 138             <source>MEN_BUILD_COMPOUND</source>
 139             <translation>Build Compound</translation>
 140         </message>
 141         <message>
 142             <source>MEN_CLIP</source>
 143             <translation>Clipping</translation>
 144         </message>
 145         <message>
 146             <source>MEN_COLORS</source>
 147             <translation>Colors / Size</translation>
 148         </message>
 149         <message>
 150             <source>MEN_COMPUTE</source>
 151             <translation>Compute</translation>
 152         </message>
 153         <message>
 154             <source>MEN_CONNECTION</source>
 155             <translation>Borders at Multi-Connection</translation>
 156         </message>
 157         <message>
 158             <source>MEN_CONNECTION_2D</source>
 159             <translation>Borders at Multi-Connection 2D</translation>
 160         </message>
 161         <message>
 162             <source>MEN_CONSTRUCT_GROUP</source>
 163             <translation>Construct Group</translation>
 164         </message>
 165         <message>
 166             <source>MEN_CONV_TO_QUAD</source>
 167             <translation>Convert to/from quadratic</translation>
 168         </message>
 169         <message>
 170             <source>MEN_CREATE_GROUP</source>
 171             <translation>Create Group</translation>
 172         </message>
 173         <message>
 174             <source>MEN_CREATE_MESH</source>
 175             <translation>Create Mesh</translation>
 176         </message>
 177         <message>
 178             <source>MEN_CREATE_SUBMESH</source>
 179             <translation>Create Sub-mesh</translation>
 180         </message>
 181         <message>
 182             <source>MEN_CTRL</source>
 183             <translation>Controls</translation>
 184         </message>
 185         <message>
 186             <source>MEN_CUT</source>
 187             <translation>Cutting of quadrangles</translation>
 188         </message>
 189         <message>
 190             <source>MEN_CUT_GROUP</source>
 191             <translation>Cut Groups</translation>
 192         </message>
 193         <message>
 194             <source>MEN_DAT</source>
 195             <translation>DAT file</translation>
 196         </message>
 197         <message>
 198             <source>MEN_DELETE</source>
 199             <translation>Delete</translation>
 200         </message>
 201         <message>
 202             <source>MEN_DEL_GROUP</source>
 203             <translation>Delete Groups</translation>
 204         </message>
 205         <message>
 206             <source>MEN_DISABLE_AUTO_COLOR</source>
 207             <translation>Disable auto color</translation>
 208         </message>
 209         <message>
 210             <source>MEN_DISPLAY_ONLY</source>
 211             <translation>Show only</translation>
 212         </message>
 213         <message>
 214             <source>MEN_DISPMODE</source>
 215             <translation>Display mode</translation>
 216         </message>
 217         <message>
 218             <source>MEN_DISP_ENT</source>
 219             <translation>Display entity</translation>
 220         </message>
 221         <message>
 222             <source>MEN_EDGE</source>
 223             <translation>Edge</translation>
 224         </message>
 225         <message>
 226             <source>MEN_EDGES</source>
 227             <translation>Edges</translation>
 228         </message>
 229         <message>
 230             <source>MEN_EDIT</source>
 231             <translation>Edit</translation>
 232         </message>
 233         <message>
 234             <source>MEN_EDIT_GROUP</source>
 235             <translation>Edit Group</translation>
 236         </message>
 237         <message>
 238             <source>MEN_EDIT_HYPO</source>
 239             <translation>Edit Hypothesis</translation>
 240         </message>
 241         <message>
 242             <source>MEN_EDIT_MESHSUBMESH</source>
 243             <translation>Edit Mesh/Sub-mesh</translation>
 244         </message>
 245         <message>
 246             <source>MEN_EXPORT</source>
 247             <translation>Export</translation>
 248         </message>
 249         <message>
 250             <source>MEN_EXPORT_DAT</source>
 251             <translation>Export to DAT file</translation>
 252         </message>
 253         <message>
 254             <source>MEN_EXPORT_MED</source>
 255             <translation>Export to MED file</translation>
 256         </message>
 257         <message>
 258             <source>MEN_EXPORT_STL</source>
 259             <translation>Export to STL file</translation>
 260         </message>
 261         <message>
 262             <source>MEN_EXPORT_UNV</source>
 263             <translation>Export to UNV file</translation>
 264         </message>
 265         <message>
 266             <source>MEN_EXTRUSION</source>
 267             <translation>Extrusion</translation>
 268         </message>
 269         <message>
 270             <source>MEN_EXTRUSION_ALONG</source>
 271             <translation>Extrusion along a path</translation>
 272         </message>
 273         <message>
 274             <source>MEN_FACES</source>
 275             <translation>Faces</translation>
 276         </message>
 277         <message>
 278             <source>MEN_FILE</source>
 279             <translation>File</translation>
 280         </message>
 281         <message>
 282             <source>MEN_FREE_BORDER</source>
 283             <translation>Free Borders</translation>
 284         </message>
 285         <message>
 286             <source>MEN_FREE_EDGE</source>
 287             <translation>Free Edges</translation>
 288         </message>
 289         <message>
 290             <source>MEN_GLOBAL_HYPO</source>
 291             <translation>Global Hypothesis</translation>
 292         </message>
 293         <message>
 294             <source>MEN_HEXA</source>
 295             <translation>Hexahedron</translation>
 296         </message>
 297         <message>
 298             <source>MEN_HIDE</source>
 299             <translation>Hide</translation>
 300         </message>
 301         <message>
 302             <source>MEN_HYPO</source>
 303             <translation>Hypotheses</translation>
 304         </message>
 305         <message>
 306             <source>MEN_IMPORT</source>
 307             <translation>Import</translation>
 308         </message>
 309         <message>
 310             <source>MEN_INT_GROUP</source>
 311             <translation>Intersect Groups</translation>
 312         </message>
 313         <message>
 314             <source>MEN_INV</source>
 315             <translation>Diagonal Inversion</translation>
 316         </message>
 317         <message>
 318             <source>MEN_LENGTH</source>
 319             <translation>Length</translation>
 320         </message>
 321         <message>
 322             <source>MEN_LENGTH_2D</source>
 323             <translation>Length 2D</translation>
 324         </message>
 325         <message>
 326             <source>MEN_MAP</source>
 327             <translation>Pattern mapping</translation>
 328         </message>
 329         <message>
 330             <source>MEN_MED</source>
 331             <translation>MED file</translation>
 332         </message>
 333         <message>
 334             <source>MEN_MERGE</source>
 335             <translation>Merge nodes</translation>
 336         </message>
 337         <message>
 338             <source>MEN_MERGE_ELEMENTS</source>
 339             <translation>Merge elements</translation>
 340         </message>
 341         <message>
 342             <source>MEN_MESH</source>
 343             <translation>Mesh</translation>
 344         </message>
 345         <message>
 346             <source>MEN_MESH_THROU_POINT</source>
 347             <translation>Mesh to pass through a point</translation>
 348         </message>
 349         <message>
 350             <source>MEN_MIN_ANG</source>
 351             <translation>Minimum Angle</translation>
 352         </message>
 353         <message>
 354             <source>MEN_MODIFY</source>
 355             <translation>Modification</translation>
 356         </message>
 357         <message>
 358             <source>MEN_MOVE</source>
 359             <translation>Move Node</translation>
 360         </message>
 361         <message>
 362             <source>MEN_NODE</source>
 363             <translation>Node</translation>
 364         </message>
 365         <message>
 366             <source>MEN_NODES</source>
 367             <translation>Nodes</translation>
 368         </message>
 369         <message>
 370             <source>MEN_NUM</source>
 371             <translation>Numbering</translation>
 372         </message>
 373         <message>
 374             <source>MEN_NUM_ELEMENTS</source>
 375             <translation>Display Elements #</translation>
 376         </message>
 377         <message>
 378             <source>MEN_NUM_NODES</source>
 379             <translation>Display Nodes #</translation>
 380         </message>
 381         <message>
 382             <source>MEN_ORIENT</source>
 383             <translation>Orientation</translation>
 384         </message>
 385         <message>
 386             <source>MEN_POLYGON</source>
 387             <translation>Polygon</translation>
 388         </message>
 389         <message>
 390             <source>MEN_POLYHEDRON</source>
 391             <translation>Polyhedron</translation>
 392         </message>
 393         <message>
 394             <source>MEN_PRECISION</source>
 395             <translation>Precision</translation>
 396         </message>
 397         <message>
 398             <source>MEN_PREF</source>
 399             <translation>Preferences</translation>
 400         </message>
 401         <message>
 402             <source>MEN_QUAD</source>
 403             <translation>Quadrangle</translation>
 404         </message>
 405         <message>
 406             <source>MEN_QUADRATIC_EDGE</source>
 407             <translation>Quadratic Edge</translation>
 408         </message>
 409         <message>
 410             <source>MEN_QUADRATIC_HEXAHEDRON</source>
 411             <translation>Quadratic Hexahedron</translation>
 412         </message>
 413         <message>
 414             <source>MEN_QUADRATIC_PENTAHEDRON</source>
 415             <translation>Quadratic Pentahedron</translation>
 416         </message>
 417         <message>
 418             <source>MEN_QUADRATIC_PYRAMID</source>
 419             <translation>Quadratic Pyramid</translation>
 420         </message>
 421         <message>
 422             <source>MEN_QUADRATIC_QUADRANGLE</source>
 423             <translation>Quadratic Quadrangle</translation>
 424         </message>
 425         <message>
 426             <source>MEN_QUADRATIC_TETRAHEDRON</source>
 427             <translation>Quadratic Tetrahedron</translation>
 428         </message>
 429         <message>
 430             <source>MEN_QUADRATIC_TRIANGLE</source>
 431             <translation>Quadratic Triangle</translation>
 432         </message>
 433         <message>
 434             <source>MEN_QUALITY</source>
 435             <translation>Quality controls</translation>
 436         </message>
 437         <message>
 438             <source>MEN_REMOVE</source>
 439             <translation>Remove</translation>
 440         </message>
 441         <message>
 442             <source>MEN_REMOVE_ELEMENTS</source>
 443             <translation>Elements</translation>
 444         </message>
 445         <message>
 446             <source>MEN_REMOVE_NODES</source>
 447             <translation>Nodes</translation>
 448         </message>
 449         <message>
 450             <source>MEN_RENAME</source>
 451             <translation>Rename</translation>
 452         </message>
 453         <message>
 454             <source>MEN_RENUM</source>
 455             <translation>Renumbering</translation>
 456         </message>
 457         <message>
 458             <source>MEN_RENUM_ELEMENTS</source>
 459             <translation>Elements</translation>
 460         </message>
 461         <message>
 462             <source>MEN_RENUM_NODES</source>
 463             <translation>Nodes</translation>
 464         </message>
 465         <message>
 466             <source>MEN_RESET</source>
 467             <translation>Reset</translation>
 468         </message>
 469         <message>
 470             <source>MEN_REVOLUTION</source>
 471             <translation>Revolution</translation>
 472         </message>
 473         <message>
 474             <source>MEN_ROT</source>
 475             <translation>Rotation</translation>
 476         </message>
 477         <message>
 478             <source>MEN_SCALAR_BAR</source>
 479             <translation>Scalar bar</translation>
 480         </message>
 481         <message>
 482             <source>MEN_SCALAR_BAR_PROP</source>
 483             <translation>Scalar bar Properties</translation>
 484         </message>
 485         <message>
 486             <source>MEN_SELECTION</source>
 487             <translation>Selection</translation>
 488         </message>
 489         <message>
 490             <source>MEN_SEL_FILTER_LIB</source>
 491             <translation>Selection filters library</translation>
 492         </message>
 493         <message>
 494             <source>MEN_SEW</source>
 495             <translation>Sewing</translation>
 496         </message>
 497         <message>
 498             <source>MEN_SHADE</source>
 499             <translation>Shading</translation>
 500         </message>
 501         <message>
 502             <source>MEN_SHOW</source>
 503             <translation>Show</translation>
 504         </message>
 505         <message>
 506             <source>MEN_SHRINK</source>
 507             <translation>Shrink</translation>
 508         </message>
 509         <message>
 510             <source>MEN_SKEW</source>
 511             <translation>Skew</translation>
 512         </message>
 513         <message>
 514             <source>MEN_SMOOTH</source>
 515             <translation>Smoothing</translation>
 516         </message>
 517         <message>
 518             <source>MEN_STD_INFO</source>
 519             <translation>Standard Mesh Infos</translation>
 520         </message>
 521         <message>
 522             <source>MEN_STL</source>
 523             <translation>STL file</translation>
 524         </message>
 525         <message>
 526             <source>MEN_SYM</source>
 527             <translation>Symmetry</translation>
 528         </message>
 529         <message>
 530             <source>MEN_TAPER</source>
 531             <translation>Taper</translation>
 532         </message>
 533         <message>
 534             <source>MEN_TETRA</source>
 535             <translation>Tetrahedron</translation>
 536         </message>
 537         <message>
 538             <source>MEN_TOOLS</source>
 539             <translation>Tools</translation>
 540         </message>
 541         <message>
 542             <source>MEN_TRANS</source>
 543             <translation>Translation</translation>
 544         </message>
 545         <message>
 546             <source>MEN_TRANSF</source>
 547             <translation>Transformation</translation>
 548         </message>
 549         <message>
 550             <source>MEN_TRANSP</source>
 551             <translation>Transparency</translation>
 552         </message>
 553         <message>
 554             <source>MEN_TRIANGLE</source>
 555             <translation>Triangle</translation>
 556         </message>
 557         <message>
 558             <source>MEN_UNASSIGN</source>
 559             <translation>Unassign</translation>
 560         </message>
 561         <message>
 562             <source>MEN_UNION</source>
 563             <translation>Union of triangles</translation>
 564         </message>
 565         <message>
 566             <source>MEN_UNION2</source>
 567             <translation>Union of two triangles</translation>
 568         </message>
 569         <message>
 570             <source>MEN_UNV</source>
 571             <translation>UNV file</translation>
 572         </message>
 573         <message>
 574             <source>MEN_UN_GROUP</source>
 575             <translation>Union Groups</translation>
 576         </message>
 577         <message>
 578             <source>MEN_UPDATE</source>
 579             <translation>Update</translation>
 580         </message>
 581         <message>
 582             <source>MEN_VIEW</source>
 583             <translation>View</translation>
 584         </message>
 585         <message>
 586             <source>MEN_VOLUMES</source>
 587             <translation>Volumes</translation>
 588         </message>
 589         <message>
 590             <source>MEN_VOLUME_3D</source>
 591             <translation>Volume</translation>
 592         </message>
 593         <message>
 594             <source>MEN_WARP</source>
 595             <translation>Warping angle</translation>
 596         </message>
 597         <message>
 598             <source>MEN_WHAT_IS</source>
 599             <translation>Mesh Element Info</translation>
 600         </message>
 601         <message>
 602             <source>MEN_WIRE</source>
 603             <translation>Wireframe</translation>
 604         </message>
 605         <message>
 606             <source>MESHERS_FILE_CANT_OPEN</source>
 607             <translation>Can not open resource file</translation>
 608         </message>
 609         <message>
 610             <source>MESHERS_FILE_CHECK_VARIABLE</source>
 611             <translation>Check environment variable SMESH_MeshersList</translation>
 612         </message>
 613         <message>
 614             <source>MESHERS_FILE_NO_VARIABLE</source>
 615             <translation>Environment variable SMESH_MeshersList is not defined</translation>
 616         </message>
 617         <message>
 618             <source>MESH_IS_NOT_SELECTED</source>
 619             <translation>There is no selected mesh
 620 Please, select a mesh and try again</translation>
 621         </message>
 622         <message>
 623             <source>MESH_NODE</source>
 624             <translation>Node</translation>
 625         </message>
 626         <message>
 627             <source>MESH_NODE_TITLE</source>
 628             <translation>Add Node</translation>
 629         </message>
 630         <message>
 631             <source>MINIMUMANGLE_ELEMENTS</source>
 632             <translation>Minimum Angle</translation>
 633         </message>
 634         <message>
 635             <source>MULTI2D_BORDERS</source>
 636             <translation>Borders at Multi-Connections 2D</translation>
 637         </message>
 638         <message>
 639             <source>MULTI_BORDERS</source>
 640             <translation>Borders at Multi-Connections</translation>
 641         </message>
 642         <message>
 643             <source>NODE_ID</source>
 644             <translation>Node ID</translation>
 645         </message>
 646         <message>
 647             <source>NON_SMESH_OBJECTS_SELECTED</source>
 648             <translation>There are objects selected which do not belong to %1 component.</translation>
 649         </message>
 650         <message>
 651             <source>PREVIEW</source>
 652             <translation>Preview</translation>
 653         </message>
 654         <message>
 655             <source>SKEW_ELEMENTS</source>
 656             <translation>Skew</translation>
 657         </message>
 658         <message>
 659             <source>SMESHGUI_INVALID_PARAMETERS</source>
 660             <translation>Parameters are not correctly specified
 661 Please enter correct values and try again</translation>
 662         </message>
 663         <message>
 664             <source>SMESH_ADD_ALGORITHM</source>
 665             <translation>Algorithms</translation>
 666         </message>
 667         <message>
 668             <source>SMESH_ADD_ALGORITHM_TITLE</source>
 669             <translation>Algorithms Assignation</translation>
 670         </message>
 671         <message>
 672             <source>SMESH_ADD_EDGE</source>
 673             <translation>Add Edge</translation>
 674         </message>
 675         <message>
 676             <source>SMESH_ADD_EDGE_TITLE</source>
 677             <translation>Add Edge</translation>
 678         </message>
 679         <message>
 680             <source>SMESH_ADD_HEXAS</source>
 681             <translation>Add Hexahedron</translation>
 682         </message>
 683         <message>
 684             <source>SMESH_ADD_HEXAS_TITLE</source>
 685             <translation>Add Hexahedron</translation>
 686         </message>
 687         <message>
 688             <source>SMESH_ADD_HYPOTHESIS</source>
 689             <translation>Hypothesis</translation>
 690         </message>
 691         <message>
 692             <source>SMESH_ADD_HYPOTHESIS_TITLE</source>
 693             <translation>Hypothesis Assignation</translation>
 694         </message>
 695         <message>
 696             <source>SMESH_ADD_HYP_WRN</source>
 697             <translation>"%1" assigned but:
 698 </translation>
 699         </message>
 700         <message>
 701             <source>SMESH_ADD_POLYGON</source>
 702             <translation>Add polygon</translation>
 703         </message>
 704         <message>
 705             <source>SMESH_ADD_POLYGON_TITLE</source>
 706             <translation>Add polygon</translation>
 707         </message>
 708         <message>
 709             <source>SMESH_ADD_QUADRANGLE</source>
 710             <translation>Add Quadrangle</translation>
 711         </message>
 712         <message>
 713             <source>SMESH_ADD_QUADRANGLE_TITLE</source>
 714             <translation>Add Quadrangle</translation>
 715         </message>
 716         <message>
 717             <source>SMESH_ADD_QUADRATIC_EDGE_TITLE</source>
 718             <translation>Add Quadratic Edge</translation>
 719         </message>
 720         <message>
 721             <source>SMESH_ADD_QUADRATIC_HEXAHEDRON_TITLE</source>
 722             <translation>Add Quadratic Hexahedron</translation>
 723         </message>
 724         <message>
 725             <source>SMESH_ADD_QUADRATIC_PENTAHEDRON_TITLE</source>
 726             <translation>Add Quadratic Pentahedron</translation>
 727         </message>
 728         <message>
 729             <source>SMESH_ADD_QUADRATIC_PYRAMID_TITLE</source>
 730             <translation>Add Quadratic Pyramid</translation>
 731         </message>
 732         <message>
 733             <source>SMESH_ADD_QUADRATIC_QUADRANGLE_TITLE</source>
 734             <translation>Add Quadratic Quadrangle</translation>
 735         </message>
 736         <message>
 737             <source>SMESH_ADD_QUADRATIC_TETRAHEDRON_TITLE</source>
 738             <translation>Add Quadratic Tetrahedron</translation>
 739         </message>
 740         <message>
 741             <source>SMESH_ADD_QUADRATIC_TRIANGLE_TITLE</source>
 742             <translation>Add Quadratic Triangle</translation>
 743         </message>
 744         <message>
 745             <source>SMESH_ADD_SUBMESH</source>
 746             <translation>SubMesh Construction</translation>
 747         </message>
 748         <message>
 749             <source>SMESH_ADD_TETRAS</source>
 750             <translation>Add Tetrahedron</translation>
 751         </message>
 752         <message>
 753             <source>SMESH_ADD_TETRAS_TITLE</source>
 754             <translation>Add Tetrahedron</translation>
 755         </message>
 756         <message>
 757             <source>SMESH_ADD_TRIANGLE</source>
 758             <translation>Add Triangle</translation>
 759         </message>
 760         <message>
 761             <source>SMESH_ADD_TRIANGLE_TITLE</source>
 762             <translation>Add Triangle</translation>
 763         </message>
 764         <message>
 765             <source>SMESH_ANGLE</source>
 766             <translation>Angle</translation>
 767         </message>
 768         <message>
 769             <source>SMESH_ARGUMENTS</source>
 770             <translation>Arguments</translation>
 771         </message>
 772         <message>
 773             <source>SMESH_AUTO_GROUPS</source>
 774             <translation>Automatically create groups</translation>
 775         </message>
 776         <message>
 777             <source>SMESH_AVAILABLE</source>
 778             <translation>Available</translation>
 779         </message>
 780         <message>
 781             <source>SMESH_AVAILABLE_ALGORITHMS</source>
 782             <translation>Available algorithms</translation>
 783         </message>
 784         <message>
 785             <source>SMESH_AVAILABLE_HYPOTHESES</source>
 786             <translation>Available hypotheses</translation>
 787         </message>
 788         <message>
 789             <source>SMESH_AXIS</source>
 790             <translation>Axis</translation>
 791         </message>
 792         <message>
 793             <source>SMESH_BAD_SELECTION</source>
 794             <translation>No valid selection</translation>
 795         </message>
 796         <message>
 797             <source>SMESH_BOUNDARYEDGES</source>
 798             <translation>Boundary Edges</translation>
 799         </message>
 800         <message>
 801             <source>SMESH_BUILD_COMPOUND_TITLE</source>
 802             <translation>Create a Compound</translation>
 803         </message>
 804         <message>
 805             <source>SMESH_BUT_ADD</source>
 806             <translation>A&amp;dd</translation>
 807         </message>
 808         <message>
 809             <source>SMESH_BUT_APPLY</source>
 810             <translation>&amp;Apply</translation>
 811         </message>
 812         <message>
 813             <source>SMESH_BUT_CANCEL</source>
 814             <translation>&amp;Cancel</translation>
 815         </message>
 816         <message>
 817             <source>SMESH_BUT_CLOSE</source>
 818             <translation>&amp;Close</translation>
 819         </message>
 820         <message>
 821             <source>SMESH_BUT_CREATE</source>
 822             <translation>Create</translation>
 823         </message>
 824         <message>
 825             <source>SMESH_BUT_DELETE</source>
 826             <translation>Delete</translation>
 827         </message>
 828         <message>
 829             <source>SMESH_BUT_FILTER</source>
 830             <translation>Set &amp;Filters</translation>
 831         </message>
 832         <message>
 833             <source>SMESH_BUT_HELP</source>
 834             <translation>&amp;Help</translation>
 835         </message>
 836         <message>
 837             <source>SMESH_BUT_NEW</source>
 838             <translation>New</translation>
 839         </message>
 840         <message>
 841             <source>SMESH_BUT_NO</source>
 842             <translation>&amp;No</translation>
 843         </message>
 844         <message>
 845             <source>SMESH_BUT_OK</source>
 846             <translation>&amp;Ok</translation>
 847         </message>
 848         <message>
 849             <source>SMESH_BUT_REMOVE</source>
 850             <translation>&amp;Remove</translation>
 851         </message>
 852         <message>
 853             <source>SMESH_BUT_SORT</source>
 854             <translation>&amp;Sort List</translation>
 855         </message>
 856         <message>
 857             <source>SMESH_BUT_YES</source>
 858             <translation>&amp;Yes</translation>
 859         </message>
 860         <message>
 861             <source>SMESH_CANT_ADD_HYP</source>
 862             <translation>Can not assign "%1":
 863 </translation>
 864         </message>
 865         <message>
 866             <source>SMESH_CANT_RM_HYP</source>
 867             <translation>Can not unassign "%1":
 868 </translation>
 869         </message>
 870         <message>
 871             <source>SMESH_CHECK_COLOR</source>
 872             <translation>Color</translation>
 873         </message>
 874         <message>
 875             <source>SMESH_CLIPPING_FROM</source>
 876             <translation>From &lt;---</translation>
 877         </message>
 878         <message>
 879             <source>SMESH_CLIPPING_INTO</source>
 880             <translation>---> Into</translation>
 881         </message>
 882         <message>
 883             <source>SMESH_CLIPPING_TITLE</source>
 884             <translation>Change Clipping</translation>
 885         </message>
 886         <message>
 887             <source>SMESH_COMPUTE_SUCCEED</source>
 888             <translation>Mesh computation succeed</translation>
 889         </message>
 890         <message>
 891             <source>SMESH_CONTENT</source>
 892             <translation>Content</translation>
 893         </message>
 894         <message>
 895             <source>SMESH_CONTINUE_MESH_VISUALIZATION</source>
 896             <translation>It seems that there is not enough memory to show the mesh
 897 so that the application may crash. Do you wish to continue visualization?</translation>
 898         </message>
 899         <message>
 900             <source>SMESH_COORDINATES</source>
 901             <translation>Coordinates</translation>
 902         </message>
 903         <message>
 904             <source>SMESH_COPY_ELEMENTS</source>
 905             <translation>Copy Elements</translation>
 906         </message>
 907         <message>
 908             <source>SMESH_COPY_GROUPS</source>
 909             <translation>Copy groups</translation>
 910         </message>
 911         <message>
 912             <source>SMESH_CREATE_ALGORITHMS</source>
 913             <translation>Create algorithms</translation>
 914         </message>
 915         <message>
 916             <source>SMESH_CREATE_COPY</source>
 917             <translation>Create a copy</translation>
 918         </message>
 919         <message>
 920             <source>SMESH_CREATE_GROUP_TITLE</source>
 921             <translation>Create Group</translation>
 922         </message>
 923         <message>
 924             <source>SMESH_CREATE_HYPOTHESES</source>
 925             <translation>Create hypotheses</translation>
 926         </message>
 927         <message>
 928             <source>SMESH_CREATE_MESH</source>
 929             <translation>Create a new mesh</translation>
 930         </message>
 931         <message>
 932             <source>SMESH_CREATE_POLYHEDRAL_VOLUME_TITLE</source>
 933             <translation>Create polyhedral volume</translation>
 934         </message>
 935         <message>
 936             <source>SMESH_DIAGONAL</source>
 937             <translation>Diagonal Inversion</translation>
 938         </message>
 939         <message>
 940             <source>SMESH_DIAGONAL_INVERSION_TITLE</source>
 941             <translation>Diagonal Inversion</translation>
 942         </message>
 943         <message>
 944             <source>SMESH_DISTANCE</source>
 945             <translation>Distance</translation>
 946         </message>
 947         <message>
 948             <source>SMESH_DRS_1</source>
 949             <translation>MED file contains no mesh with the given name</translation>
 950         </message>
 951         <message>
 952             <source>SMESH_DRS_2</source>
 953             <translation>MED file has overlapped ranges of element numbers,
 954      the numbers from the file are ignored</translation>
 955         </message>
 956         <message>
 957             <source>SMESH_DRS_3</source>
 958             <translation>Some elements were skipped due to incorrect file data</translation>
 959         </message>
 960         <message>
 961             <source>SMESH_DRS_4</source>
 962             <translation>    The file is incorrect,
 963 some information will be missed</translation>
 964         </message>
 965         <message>
 966             <source>SMESH_DRS_EMPTY</source>
 967             <translation>      The file is empty,
 968 there is nothing to be published</translation>
 969         </message>
 970         <message>
 971             <source>SMESH_DX</source>
 972             <translation>dX</translation>
 973         </message>
 974         <message>
 975             <source>SMESH_DY</source>
 976             <translation>dY</translation>
 977         </message>
 978         <message>
 979             <source>SMESH_DZ</source>
 980             <translation>dZ</translation>
 981         </message>
 982         <message>
 983             <source>SMESH_EDGE</source>
 984             <translation>Edge</translation>
 985         </message>
 986         <message>
 987             <source>SMESH_EDGES_CONNECTIVITY_TITLE</source>
 988             <translation>Edges Connectivity</translation>
 989         </message>
 990         <message>
 991             <source>SMESH_EDIT_GROUP_TITLE</source>
 992             <translation>Edit Group</translation>
 993         </message>
 994         <message>
 995             <source>SMESH_EDIT_HYPOTHESES</source>
 996             <translation>Hypotheses Assignation</translation>
 997         </message>
 998         <message>
 999             <source>SMESH_EDIT_USED</source>
1000             <translation>Used</translation>
1001         </message>
1002         <message>
1003             <source>SMESH_ELEMENTS</source>
1004             <translation>Elements</translation>
1005         </message>
1006         <message>
1007             <source>SMESH_ELEMENTS_COLOR</source>
1008             <translation>Mesh Element Color</translation>
1009         </message>
1010         <message>
1011             <source>SMESH_ELEMENTS_TYPE</source>
1012             <translation>Elements Type</translation>
1013         </message>
1014         <message>
1015             <source>SMESH_ELEMENT_TYPE</source>
1016             <translation>Element Type</translation>
1017         </message>
1018         <message>
1019             <source>SMESH_ERROR</source>
1020             <translation>Error</translation>
1021         </message>
1022         <message>
1023             <source>SMESH_ERR_SCALARBAR_PARAMS</source>
1024             <translation>Warning! The parameters is incorrect</translation>
1025         </message>
1026         <message>
1027             <source>SMESH_EXPORT_FAILED</source>
1028             <translation>Mesh export failed.
1029 Probably, there is not enough space on disk.</translation>
1030         </message>
1031         <message>
1032             <source>SMESH_EXPORT_MED_DUPLICATED_GRP</source>
1033             <translation>There are duplicated group names in mesh "%1".
1034 You can cancel exporting and rename them,
1035 otherwise some group names in the resulting MED file
1036 will not match ones in the study.
1037 Do you want to continue ?</translation>
1038         </message>
1039         <message>
1040             <source>SMESH_EXPORT_MED_V2_1</source>
1041             <translation>During export mesh with name - "%1" to MED 2.1
1042 polygons and polyhedrons elements will be missed
1043 For correct export use MED 2.2
1044 Are you sure want to export to MED 2.1 ?</translation>
1045         </message>
1046         <message>
1047             <source>SMESH_EXPORT_STL1</source>
1048             <translation>Mesh  - "%1" does not contain triangles</translation>
1049         </message>
1050         <message>
1051             <source>SMESH_EXPORT_STL2</source>
1052             <translation>Mesh  - "%1" contains another than triangles elements,     they are ignored during writing to STL</translation>
1053         </message>
1054         <message>
1055             <source>SMESH_EXPORT_UNV</source>
1056             <translation>During export mesh with name - "%1" to UNV
1057        pyramid's elements will be missed</translation>
1058         </message>
1059         <message>
1060             <source>SMESH_EXTRUSION</source>
1061             <translation>Extrusion</translation>
1062         </message>
1063         <message>
1064             <source>SMESH_FACE</source>
1065             <translation>Face</translation>
1066         </message>
1067         <message>
1068             <source>SMESH_FEATUREANGLE</source>
1069             <translation>Feature Angle</translation>
1070         </message>
1071         <message>
1072             <source>SMESH_FEATUREEDGES</source>
1073             <translation>Feature Edges</translation>
1074         </message>
1075         <message>
1076             <source>SMESH_FONT_ARIAL</source>
1077             <translation>Arial</translation>
1078         </message>
1079         <message>
1080             <source>SMESH_FONT_BOLD</source>
1081             <translation>Bold</translation>
1082         </message>
1083         <message>
1084             <source>SMESH_FONT_COURIER</source>
1085             <translation>Courier</translation>
1086         </message>
1087         <message>
1088             <source>SMESH_FONT_ITALIC</source>
1089             <translation>Italic</translation>
1090         </message>
1091         <message>
1092             <source>SMESH_FONT_SCALARBAR</source>
1093             <translation>Font</translation>
1094         </message>
1095         <message>
1096             <source>SMESH_FONT_SHADOW</source>
1097             <translation>Shadow</translation>
1098         </message>
1099         <message>
1100             <source>SMESH_FONT_TIMES</source>
1101             <translation>Times</translation>
1102         </message>
1103         <message>
1104             <source>SMESH_GEOM_GROUP</source>
1105             <translation>Geometry group</translation>
1106         </message>
1107         <message>
1108             <source>SMESH_GROUP</source>
1109             <translation>Group</translation>
1110         </message>
1111         <message>
1112             <source>SMESH_GROUP_GEOMETRY</source>
1113             <translation>Group on geometry</translation>
1114         </message>
1115         <message>
1116             <source>SMESH_GROUP_SELECTED</source>
1117             <translation>%1 Groups</translation>
1118         </message>
1119         <message>
1120             <source>SMESH_GROUP_STANDALONE</source>
1121             <translation>Standalone group</translation>
1122         </message>
1123         <message>
1124             <source>SMESH_GROUP_TYPE</source>
1125             <translation>Group type</translation>
1126         </message>
1127         <message>
1128             <source>SMESH_HEIGHT</source>
1129             <translation>Height:</translation>
1130         </message>
1131         <message>
1132             <source>SMESH_HEXAS</source>
1133             <translation>Hexahedron</translation>
1134         </message>
1135         <message>
1136             <source>SMESH_HILIGHT_COLOR</source>
1137             <translation>Highlight Color</translation>
1138         </message>
1139         <message>
1140             <source>SMESH_HORIZONTAL</source>
1141             <translation>Horizontal</translation>
1142         </message>
1143         <message>
1144             <source>SMESH_HYPOTHESES</source>
1145             <translation>Hypotheses</translation>
1146         </message>
1147         <message>
1148             <source>SMESH_HYP_1</source>
1149             <translation>Algorithm misses a hypothesis</translation>
1150         </message>
1151         <message>
1152             <source>SMESH_HYP_10</source>
1153             <translation>Hypothesis and submesh dimensions mismatch</translation>
1154         </message>
1155         <message>
1156             <source>SMESH_HYP_11</source>
1157             <translation>Shape is neither the main one, nor its subshape, nor a valid group</translation>
1158         </message>
1159         <message>
1160             <source>SMESH_HYP_12</source>
1161             <translation>Geomerty mismatches algorithm's expectation</translation>
1162         </message>
1163         <message>
1164             <source>SMESH_HYP_2</source>
1165             <translation>There are concurrent hypotheses on a shape</translation>
1166         </message>
1167         <message>
1168             <source>SMESH_HYP_3</source>
1169             <translation>Hypothesis has a bad parameter value</translation>
1170         </message>
1171         <message>
1172             <source>SMESH_HYP_4</source>
1173             <translation>Submesh is ignored as there is another algorithm of upper dimension generating %1D elements</translation>
1174         </message>
1175         <message>
1176             <source>SMESH_HYP_5</source>
1177             <translation>Algorithm hides algorithm(s) of lower dimension by generating all-dimensions elements</translation>
1178         </message>
1179         <message>
1180             <source>SMESH_HYP_6</source>
1181             <translation>Unknown fatal error at hypothesis definition</translation>
1182         </message>
1183         <message>
1184             <source>SMESH_HYP_7</source>
1185             <translation>Hypothesis is not suitable in the current context</translation>
1186         </message>
1187         <message>
1188             <source>SMESH_HYP_8</source>
1189             <translation>Non-conform mesh is produced using applied hypotheses</translation>
1190         </message>
1191         <message>
1192             <source>SMESH_HYP_9</source>
1193             <translation>Such dimention hypothesis is already assigned to the shape</translation>
1194         </message>
1195         <message>
1196             <source>SMESH_ID_DIAGONAL</source>
1197             <translation>Id Edges</translation>
1198         </message>
1199         <message>
1200             <source>SMESH_ID_ELEMENTS</source>
1201             <translation>Id Elements</translation>
1202         </message>
1203         <message>
1204             <source>SMESH_ID_FACES</source>
1205             <translation>Id Faces</translation>
1206         </message>
1207         <message>
1208             <source>SMESH_ID_NODES</source>
1209             <translation>Id Nodes</translation>
1210         </message>
1211         <message>
1212             <source>SMESH_INFORMATION</source>
1213             <translation>Information</translation>
1214         </message>
1215         <message>
1216             <source>SMESH_INIT</source>
1217             <translation>Mesh</translation>
1218         </message>
1219         <message>
1220             <source>SMESH_INIT_MESH</source>
1221             <translation>Mesh Construction</translation>
1222         </message>
1223         <message>
1224             <source>SMESH_INSUFFICIENT_DATA</source>
1225             <translation>Insufficient input value</translation>
1226         </message>
1227         <message>
1228             <source>SMESH_LABELS</source>
1229             <translation>Labels:</translation>
1230         </message>
1231         <message>
1232             <source>SMESH_LABELS_COLORS_SCALARBAR</source>
1233             <translation>Colors &amp;&amp; Labels</translation>
1234         </message>
1235         <message>
1236             <source>SMESH_LENGTH</source>
1237             <translation>Length</translation>
1238         </message>
1239         <message>
1240             <source>SMESH_MAKE_GROUPS</source>
1241             <translation>Generate groups</translation>
1242         </message>
1243         <message>
1244             <source>SMESH_MANIFOLDEDGES</source>
1245             <translation>Manifold Edges</translation>
1246         </message>
1247         <message>
1248             <source>SMESH_MAX</source>
1249             <translation>Max</translation>
1250         </message>
1251         <message>
1252             <source>SMESH_MEN_ALGORITHMS</source>
1253             <translation>Algorithms</translation>
1254         </message>
1255         <message>
1256             <source>SMESH_MEN_APPLIED_ALGORIHTMS</source>
1257             <translation>Applied Algorithms</translation>
1258         </message>
1259         <message>
1260             <source>SMESH_MEN_APPLIED_HYPOTHESIS</source>
1261             <translation>Applied Hypotheses</translation>
1262         </message>
1263         <message>
1264             <source>SMESH_MEN_COMPONENT</source>
1265             <translation>SMESH</translation>
1266         </message>
1267         <message>
1268             <source>SMESH_MEN_HYPOTHESIS</source>
1269             <translation>Hypotheses</translation>
1270         </message>
1271         <message>
1272             <source>SMESH_MEN_SubMeshesOnCompound</source>
1273             <translation>SubMeshes On Compound</translation>
1274         </message>
1275         <message>
1276             <source>SMESH_MEN_SubMeshesOnEdge</source>
1277             <translation>SubMeshes On Edge</translation>
1278         </message>
1279         <message>
1280             <source>SMESH_MEN_SubMeshesOnFace</source>
1281             <translation>SubMeshes On Face</translation>
1282         </message>
1283         <message>
1284             <source>SMESH_MEN_SubMeshesOnSolid</source>
1285             <translation>SubMeshes On Solid</translation>
1286         </message>
1287         <message>
1288             <source>SMESH_MEN_SubMeshesOnVertex</source>
1289             <translation>SubMeshes On Vertex</translation>
1290         </message>
1291         <message>
1292             <source>SMESH_MERGE_ELEMENTS</source>
1293             <translation>Merge elements</translation>
1294         </message>
1295         <message>
1296             <source>SMESH_MERGE_NODES</source>
1297             <translation>Merge nodes</translation>
1298         </message>
1299         <message>
1300             <source>SMESH_MESH</source>
1301             <translation>Mesh</translation>
1302         </message>
1303         <message>
1304             <source>SMESH_MESHINFO_ALL_TYPES</source>
1305             <translation>Heterogenous</translation>
1306         </message>
1307         <message>
1308             <source>SMESH_MESHINFO_EDGES</source>
1309             <translation>Edges</translation>
1310         </message>
1311         <message>
1312             <source>SMESH_MESHINFO_ELEMENTS</source>
1313             <translation>Elements</translation>
1314         </message>
1315         <message>
1316             <source>SMESH_MESHINFO_ENTITIES</source>
1317             <translation>Entities</translation>
1318         </message>
1319         <message>
1320             <source>SMESH_MESHINFO_FACES</source>
1321             <translation>Faces</translation>
1322         </message>
1323         <message>
1324             <source>SMESH_MESHINFO_HEXAS</source>
1325             <translation>Hexahedrons</translation>
1326         </message>
1327         <message>
1328             <source>SMESH_MESHINFO_NAME</source>
1329             <translation>Name</translation>
1330         </message>
1331         <message>
1332             <source>SMESH_MESHINFO_NODES</source>
1333             <translation>Nodes</translation>
1334         </message>
1335         <message>
1336             <source>SMESH_MESHINFO_ORDER0</source>
1337             <translation>Total</translation>
1338         </message>
1339         <message>
1340             <source>SMESH_MESHINFO_ORDER1</source>
1341             <translation>Linear</translation>
1342         </message>
1343         <message>
1344             <source>SMESH_MESHINFO_ORDER2</source>
1345             <translation>Quadratic</translation>
1346         </message>
1347         <message>
1348             <source>SMESH_MESHINFO_POLYEDRES</source>
1349             <translation>Polyhedrons</translation>
1350         </message>
1351         <message>
1352             <source>SMESH_MESHINFO_POLYGONES</source>
1353             <translation>Polygons</translation>
1354         </message>
1355         <message>
1356             <source>SMESH_MESHINFO_PRISMS</source>
1357             <translation>Prisms</translation>
1358         </message>
1359         <message>
1360             <source>SMESH_MESHINFO_PYRAS</source>
1361             <translation>Pyramids</translation>
1362         </message>
1363         <message>
1364             <source>SMESH_MESHINFO_QUADRANGLES</source>
1365             <translation>Quadrangles</translation>
1366         </message>
1367         <message>
1368             <source>SMESH_MESHINFO_TETRAS</source>
1369             <translation>Tetrahedrons</translation>
1370         </message>
1371         <message>
1372             <source>SMESH_MESHINFO_TITLE</source>
1373             <translation>Mesh Infos</translation>
1374         </message>
1375         <message>
1376             <source>SMESH_MESHINFO_TOTAL</source>
1377             <translation>Total</translation>
1378         </message>
1379         <message>
1380             <source>SMESH_MESHINFO_TRIANGLES</source>
1381             <translation>Triangles</translation>
1382         </message>
1383         <message>
1384             <source>SMESH_MESHINFO_TYPE</source>
1385             <translation>Type</translation>
1386         </message>
1387         <message>
1388             <source>SMESH_MESHINFO_VOLUMES</source>
1389             <translation>Volumes</translation>
1390         </message>
1391         <message>
1392             <source>SMESH_MIN</source>
1393             <translation>Min</translation>
1394         </message>
1395         <message>
1396             <source>SMESH_MOVE</source>
1397             <translation>Move</translation>
1398         </message>
1399         <message>
1400             <source>SMESH_MOVE_ELEMENTS</source>
1401             <translation>Move Elements</translation>
1402         </message>
1403         <message>
1404             <source>SMESH_MOVE_NODES_TITLE</source>
1405             <translation>Move Node</translation>
1406         </message>
1407         <message>
1408             <source>SMESH_NAME</source>
1409             <translation>Name</translation>
1410         </message>
1411         <message>
1412             <source>SMESH_NODES</source>
1413             <translation>Nodes</translation>
1414         </message>
1415         <message>
1416             <source>SMESH_NONMANIFOLDEDGES</source>
1417             <translation>Non Manifold Edges</translation>
1418         </message>
1419         <message>
1420             <source>SMESH_NORMAL</source>
1421             <translation>Normal</translation>
1422         </message>
1423         <message>
1424             <source>SMESH_NO_MESH_VISUALIZATION</source>
1425             <translation>There is not enough memory to show the mesh</translation>
1426         </message>
1427         <message>
1428             <source>SMESH_NUMBEROFCOLORS</source>
1429             <translation>Nb of colors:</translation>
1430         </message>
1431         <message>
1432             <source>SMESH_NUMBEROFLABELS</source>
1433             <translation>Nb of labels:</translation>
1434         </message>
1435         <message>
1436             <source>SMESH_NUMBEROFSTEPS</source>
1437             <translation>Number of steps:</translation>
1438         </message>
1439         <message>
1440             <source>SMESH_OBJECTS_SELECTED</source>
1441             <translation>%1_objects</translation>
1442         </message>
1443         <message>
1444             <source>SMESH_OBJECT_ALGORITHM</source>
1445             <translation>Algorithm</translation>
1446         </message>
1447         <message>
1448             <source>SMESH_OBJECT_GEOM</source>
1449             <translation>Geometrical Object</translation>
1450         </message>
1451         <message>
1452             <source>SMESH_OBJECT_HYPOTHESIS</source>
1453             <translation>Hypothesis</translation>
1454         </message>
1455         <message>
1456             <source>SMESH_OBJECT_MESH</source>
1457             <translation>Mesh</translation>
1458         </message>
1459         <message>
1460             <source>SMESH_OBJECT_MESHorSUBMESH</source>
1461             <translation>Mesh or SubMesh</translation>
1462         </message>
1463         <message>
1464             <source>SMESH_OPERATION_FAILED</source>
1465             <translation>Operation failed</translation>
1466         </message>
1467         <message>
1468             <source>SMESH_ORIENTATION</source>
1469             <translation>Orientation</translation>
1470         </message>
1471         <message>
1472             <source>SMESH_ORIENTATION_ELEMENTS_TITLE</source>
1473             <translation>Change Orientation</translation>
1474         </message>
1475         <message>
1476             <source>SMESH_OUTLINE_COLOR</source>
1477             <translation>Mesh Object Color</translation>
1478         </message>
1479         <message>
1480             <source>SMESH_PARAMETERS</source>
1481             <translation>Parameters</translation>
1482         </message>
1483         <message>
1484             <source>SMESH_PLANE</source>
1485             <translation>Plane</translation>
1486         </message>
1487         <message>
1488             <source>SMESH_POINT</source>
1489             <translation>Point</translation>
1490         </message>
1491         <message>
1492             <source>SMESH_POINT_1</source>
1493             <translation>Point 1</translation>
1494         </message>
1495         <message>
1496             <source>SMESH_POINT_2</source>
1497             <translation>Point 2</translation>
1498         </message>
1499         <message>
1500             <source>SMESH_POLYEDRE_CREATE_ERROR</source>
1501             <translation>Polyedron creation error</translation>
1502         </message>
1503         <message>
1504             <source>SMESH_POLYEDRON</source>
1505             <translation>Polyhedron</translation>
1506         </message>
1507         <message>
1508             <source>SMESH_POLYGON</source>
1509             <translation>Polygon</translation>
1510         </message>
1511         <message>
1512             <source>SMESH_POSITION_SIZE_SCALARBAR</source>
1513             <translation>Origin &amp;&amp; Size</translation>
1514         </message>
1515         <message>
1516             <source>SMESH_PRECISION</source>
1517             <translation>Precision</translation>
1518         </message>
1519         <message>
1520             <source>SMESH_PREFERENCES_SCALARBAR</source>
1521             <translation>Scalar Bar Preferences</translation>
1522         </message>
1523         <message>
1524             <source>SMESH_PREF_SELECTION</source>
1525             <translation>Preferences - Selection</translation>
1526         </message>
1527         <message>
1528             <source>SMESH_PRESELECTION</source>
1529             <translation>Preselection</translation>
1530         </message>
1531         <message>
1532             <source>SMESH_PRISM</source>
1533             <translation>Prism</translation>
1534         </message>
1535         <message>
1536             <source>SMESH_PROPERTIES_SCALARBAR</source>
1537             <translation>Scalar Bar Properties</translation>
1538         </message>
1539         <message>
1540             <source>SMESH_PYRAMID</source>
1541             <translation>Pyramid</translation>
1542         </message>
1543         <message>
1544             <source>SMESH_QUADRANGLE</source>
1545             <translation>Quadrangle</translation>
1546         </message>
1547         <message>
1548             <source>SMESH_QUADRATIC_EDGE</source>
1549             <translation>Quadratic Edge</translation>
1550         </message>
1551         <message>
1552             <source>SMESH_QUADRATIC_HEXAHEDRON</source>
1553             <translation>Quadratic Hexahedron</translation>
1554         </message>
1555         <message>
1556             <source>SMESH_QUADRATIC_PENTAHEDRON</source>
1557             <translation>Quadratic Pentahedron</translation>
1558         </message>
1559         <message>
1560             <source>SMESH_QUADRATIC_PYRAMID</source>
1561             <translation>Quadratic Pyramid</translation>
1562         </message>
1563         <message>
1564             <source>SMESH_QUADRATIC_QUADRANGLE</source>
1565             <translation>Quadratic Quadrangle</translation>
1566         </message>
1567         <message>
1568             <source>SMESH_QUADRATIC_TETRAHEDRON</source>
1569             <translation>Quadratic Tetrahedron</translation>
1570         </message>
1571         <message>
1572             <source>SMESH_QUADRATIC_TRIANGLE</source>
1573             <translation>Quadratic Triangle</translation>
1574         </message>
1575         <message>
1576             <source>SMESH_RANGE_MAX</source>
1577             <translation>Max value:</translation>
1578         </message>
1579         <message>
1580             <source>SMESH_RANGE_MIN</source>
1581             <translation>Min value:</translation>
1582         </message>
1583         <message>
1584             <source>SMESH_RANGE_SCALARBAR</source>
1585             <translation>Scalar Range</translation>
1586         </message>
1587         <message>
1588             <source>SMESH_REALLY_DELETE</source>
1589             <translation>Do you really want to delete object(s) ?</translation>
1590         </message>
1591         <message>
1592             <source>SMESH_REMOVE</source>
1593             <translation>Remove</translation>
1594         </message>
1595         <message>
1596             <source>SMESH_REMOVE_ELEMENTS_TITLE</source>
1597             <translation>Remove Elements</translation>
1598         </message>
1599         <message>
1600             <source>SMESH_REMOVE_NODES_TITLE</source>
1601             <translation>Remove Nodes</translation>
1602         </message>
1603         <message>
1604             <source>SMESH_RENUMBERING</source>
1605             <translation>Renumbering</translation>
1606         </message>
1607         <message>
1608             <source>SMESH_RENUMBERING_ELEMENTS_TITLE</source>
1609             <translation>Renumbering elements</translation>
1610         </message>
1611         <message>
1612             <source>SMESH_RENUMBERING_NODES_TITLE</source>
1613             <translation>Renumbering nodes</translation>
1614         </message>
1615         <message>
1616             <source>SMESH_REVERSE</source>
1617             <translation>Reverse</translation>
1618         </message>
1619         <message>
1620             <source>SMESH_REVOLUTION</source>
1621             <translation>Revolution</translation>
1622         </message>
1623         <message>
1624             <source>SMESH_RM_HYP_WRN</source>
1625             <translation>"%1" unassigned but:
1626 </translation>
1627         </message>
1628         <message>
1629             <source>SMESH_ROTATION</source>
1630             <translation>Rotation</translation>
1631         </message>
1632         <message>
1633             <source>SMESH_ROTATION_TITLE</source>
1634             <translation>Rotation about an axis</translation>
1635         </message>
1636         <message>
1637             <source>SMESH_SCALARBAR</source>
1638             <translation>Scalar Bar</translation>
1639         </message>
1640         <message>
1641             <source>SMESH_SEGMENTS</source>
1642             <translation>Segments</translation>
1643         </message>
1644         <message>
1645             <source>SMESH_SELECTION</source>
1646             <translation>Selection</translation>
1647         </message>
1648         <message>
1649             <source>SMESH_SELECT_FROM</source>
1650             <translation>Select From</translation>
1651         </message>
1652         <message>
1653             <source>SMESH_SELECT_WHOLE_MESH</source>
1654             <translation>Select whole mesh, submesh or group</translation>
1655         </message>
1656         <message>
1657             <source>SMESH_SET_COLOR</source>
1658             <translation>Color group</translation>
1659         </message>
1660         <message>
1661             <source>SMESH_SEWING</source>
1662             <translation>Sewing</translation>
1663         </message>
1664         <message>
1665             <source>SMESH_SMOOTHING</source>
1666             <translation>Smoothing</translation>
1667         </message>
1668         <message>
1669             <source>SMESH_STANDARD_MESHINFO_TITLE</source>
1670             <translation>Standard Mesh Infos</translation>
1671         </message>
1672         <message>
1673             <source>SMESH_SUBMESH</source>
1674             <translation>SubMesh</translation>
1675         </message>
1676         <message>
1677             <source>SMESH_SUBMESH_SELECTED</source>
1678             <translation>%1 SubMeshes</translation>
1679         </message>
1680         <message>
1681             <source>SMESH_SYMMETRY</source>
1682             <translation>Symmetry</translation>
1683         </message>
1684         <message>
1685             <source>SMESH_TETRAS</source>
1686             <translation>Tetrahedron</translation>
1687         </message>
1688         <message>
1689             <source>SMESH_TITLE</source>
1690             <translation>Title:</translation>
1691         </message>
1692         <message>
1693             <source>SMESH_TOLERANCE</source>
1694             <translation>Tolerance</translation>
1695         </message>
1696         <message>
1697             <source>SMESH_TRANSLATION</source>
1698             <translation>Translation</translation>
1699         </message>
1700         <message>
1701             <source>SMESH_TRANSPARENCY_OPAQUE</source>
1702             <translation>---> Opaque</translation>
1703         </message>
1704         <message>
1705             <source>SMESH_TRANSPARENCY_TITLE</source>
1706             <translation>Change Transparency</translation>
1707         </message>
1708         <message>
1709             <source>SMESH_TRANSPARENCY_TRANSPARENT</source>
1710             <translation>Transparent &lt;---</translation>
1711         </message>
1712         <message>
1713             <source>SMESH_TRIANGLE</source>
1714             <translation>Triangle</translation>
1715         </message>
1716         <message>
1717             <source>SMESH_UPDATEVIEW</source>
1718             <translation>Update View</translation>
1719         </message>
1720         <message>
1721             <source>SMESH_VALUE</source>
1722             <translation>Value</translation>
1723         </message>
1724         <message>
1725             <source>SMESH_VECTOR</source>
1726             <translation>Vector</translation>
1727         </message>
1728         <message>
1729             <source>SMESH_VERTICAL</source>
1730             <translation>Vertical</translation>
1731         </message>
1732         <message>
1733             <source>SMESH_VISU_PROBLEM</source>
1734             <translation>Mesh visualization failed, probably due to lack of memory</translation>
1735         </message>
1736         <message>
1737             <source>SMESH_VISU_PROBLEM_CLEAR</source>
1738             <translation>Mesh visualization failed, no memory even to show a message,
1739 so all visual data have been removed to let the application live.
1740 Consider saving your work before application crash</translation>
1741         </message>
1742         <message>
1743             <source>SMESH_VOLUME</source>
1744             <translation>Volume</translation>
1745         </message>
1746         <message>
1747             <source>SMESH_WARNING</source>
1748             <translation>Warning</translation>
1749         </message>
1750         <message>
1751             <source>SMESH_WHAT_IS_TITLE</source>
1752             <translation>Mesh Element Info</translation>
1753         </message>
1754         <message>
1755             <source>SMESH_WIDTH</source>
1756             <translation>Width:</translation>
1757         </message>
1758         <message>
1759             <source>SMESH_WRN_ALGORITHM_ALREADYEXIST</source>
1760             <translation>Algorithm already exists</translation>
1761         </message>
1762         <message>
1763             <source>SMESH_WRN_COMPUTE_FAILED</source>
1764             <translation>Mesh computation failed</translation>
1765         </message>
1766         <message>
1767             <source>SMESH_WRN_EMPTY_NAME</source>
1768             <translation>Empty name is not valid</translation>
1769         </message>
1770         <message>
1771             <source>SMESH_WRN_HYPOTHESIS_ALREADYEXIST</source>
1772             <translation>Hypothesis already exists</translation>
1773         </message>
1774         <message>
1775             <source>SMESH_WRN_HYPOTHESIS_NOTEXIST</source>
1776             <translation>Hypothesis or Algorithm not exists</translation>
1777         </message>
1778         <message>
1779             <source>SMESH_WRN_MISSING_PARAMETERS</source>
1780             <translation>Missing parameters</translation>
1781         </message>
1782         <message>
1783             <source>SMESH_WRN_NO_AVAILABLE_DATA</source>
1784             <translation>No available data in selection</translation>
1785         </message>
1786         <message>
1787             <source>SMESH_WRN_SELECTIONMODE_DIAGONAL</source>
1788             <translation>Activate Link Selection Mode</translation>
1789         </message>
1790         <message>
1791             <source>SMESH_WRN_SELECTIONMODE_ELEMENTS</source>
1792             <translation>Activate Elements Selection Mode</translation>
1793         </message>
1794         <message>
1795             <source>SMESH_WRN_SELECTIONMODE_NODES</source>
1796             <translation>Activate Nodes Selection Mode</translation>
1797         </message>
1798         <message>
1799             <source>SMESH_WRN_VIEWER_VTK</source>
1800             <translation>Study frame with VTK Viewer must be activated</translation>
1801         </message>
1802         <message>
1803             <source>SMESH_WRN_WARNING</source>
1804             <translation>Warning</translation>
1805         </message>
1806         <message>
1807             <source>SMESH_X</source>
1808             <translation>X</translation>
1809         </message>
1810         <message>
1811             <source>SMESH_X_SCALARBAR</source>
1812             <translation>X:</translation>
1813         </message>
1814         <message>
1815             <source>SMESH_Y</source>
1816             <translation>Y</translation>
1817         </message>
1818         <message>
1819             <source>SMESH_Y_SCALARBAR</source>
1820             <translation>Y:</translation>
1821         </message>
1822         <message>
1823             <source>SMESH_Z</source>
1824             <translation>Z</translation>
1825         </message>
1826         <message>
1827             <source>STATE_ALGO_MISSING</source>
1828             <translation>%3 %2D algorithm is missing</translation>
1829         </message>
1830         <message>
1831             <source>STATE_HYP_BAD_GEOMETRY</source>
1832             <translation>%3 %2D algorithm "%1" is assigned to geometry mismatching its expectation</translation>
1833         </message>
1834         <message>
1835             <source>STATE_HYP_BAD_PARAMETER</source>
1836             <translation>Hypothesis of %3 %2D algorithm "%1" has a bad parameter value</translation>
1837         </message>
1838         <message>
1839             <source>STATE_HYP_MISSING</source>
1840             <translation>%3 %2D algorithm "%1" misses %4D hypothesis</translation>
1841         </message>
1842         <message>
1843             <source>STATE_HYP_NOTCONFORM</source>
1844             <translation>%3 %2D algorithm "%1" would produce not conform mesh: global "Not Conform Mesh Allowed" hypotesis is missing</translation>
1845         </message>
1846         <message>
1847             <source>STB_ADV_INFO</source>
1848             <translation>Advanced Mesh Infos</translation>
1849         </message>
1850         <message>
1851             <source>STB_ALL</source>
1852             <translation>All</translation>
1853         </message>
1854         <message>
1855             <source>STB_AREA</source>
1856             <translation>Area</translation>
1857         </message>
1858         <message>
1859             <source>STB_ASPECT</source>
1860             <translation>Aspect Ratio</translation>
1861         </message>
1862         <message>
1863             <source>STB_ASPECT_3D</source>
1864             <translation>Aspect Ratio 3D</translation>
1865         </message>
1866         <message>
1867             <source>STB_AUTO_COLOR</source>
1868             <translation>Auto color</translation>
1869         </message>
1870         <message>
1871             <source>STB_AUTO_UPD</source>
1872             <translation>Automatic update</translation>
1873         </message>
1874         <message>
1875             <source>STB_BUILD_COMPOUND</source>
1876             <translation>Build Compound Mesh</translation>
1877         </message>
1878         <message>
1879             <source>STB_CLIP</source>
1880             <translation>Clipping</translation>
1881         </message>
1882         <message>
1883             <source>STB_COLORS</source>
1884             <translation>Colors / Size</translation>
1885         </message>
1886         <message>
1887             <source>STB_COMPUTE</source>
1888             <translation>Compute</translation>
1889         </message>
1890         <message>
1891             <source>STB_CONNECTION</source>
1892             <translation>Borders at Multi-Connection</translation>
1893         </message>
1894         <message>
1895             <source>STB_CONNECTION_2D</source>
1896             <translation>Borders at Multi-Connection 2D</translation>
1897         </message>
1898         <message>
1899             <source>STB_CONSTRUCT_GROUP</source>
1900             <translation>Construct Group</translation>
1901         </message>
1902         <message>
1903             <source>STB_CONV_TO_QUAD</source>
1904             <translation>Convert to/from quadratic</translation>
1905         </message>
1906         <message>
1907             <source>STB_CREATE_GROUP</source>
1908             <translation>Create Group</translation>
1909         </message>
1910         <message>
1911             <source>STB_CREATE_MESH</source>
1912             <translation>Create Mesh</translation>
1913         </message>
1914         <message>
1915             <source>STB_CREATE_SUBMESH</source>
1916             <translation>Create Sub-mesh</translation>
1917         </message>
1918         <message>
1919             <source>STB_CUT</source>
1920             <translation>Cutting of quadrangles</translation>
1921         </message>
1922         <message>
1923             <source>STB_CUT_GROUP</source>
1924             <translation>Cut Groups</translation>
1925         </message>
1926         <message>
1927             <source>STB_DAT</source>
1928             <translation>Import DAT file</translation>
1929         </message>
1930         <message>
1931             <source>STB_DELETE</source>
1932             <translation>Delete</translation>
1933         </message>
1934         <message>
1935             <source>STB_DEL_GROUP</source>
1936             <translation>Delete Groups</translation>
1937         </message>
1938         <message>
1939             <source>STB_DISABLE_AUTO_COLOR</source>
1940             <translation>Disable auto color</translation>
1941         </message>
1942         <message>
1943             <source>STB_DISPLAY_ONLY</source>
1944             <translation>Show only</translation>
1945         </message>
1946         <message>
1947             <source>STB_DISP_ENT</source>
1948             <translation>Display entity</translation>
1949         </message>
1950         <message>
1951             <source>STB_EDGE</source>
1952             <translation>Edge</translation>
1953         </message>
1954         <message>
1955             <source>STB_EDGES</source>
1956             <translation>Edges</translation>
1957         </message>
1958         <message>
1959             <source>STB_EDIT_GROUP</source>
1960             <translation>Edit Group</translation>
1961         </message>
1962         <message>
1963             <source>STB_EDIT_HYPO</source>
1964             <translation>Edit Hypothesis</translation>
1965         </message>
1966         <message>
1967             <source>STB_EDIT_MESHSUBMESH</source>
1968             <translation>Edit Mesh/Sub-mesh</translation>
1969         </message>
1970         <message>
1971             <source>STB_EXPORT_DAT</source>
1972             <translation>Export to DAT file</translation>
1973         </message>
1974         <message>
1975             <source>STB_EXPORT_MED</source>
1976             <translation>Export to MED file</translation>
1977         </message>
1978         <message>
1979             <source>STB_EXPORT_STL</source>
1980             <translation>Export to STL file</translation>
1981         </message>
1982         <message>
1983             <source>STB_EXPORT_UNV</source>
1984             <translation>Export to UNV file</translation>
1985         </message>
1986         <message>
1987             <source>STB_EXTRUSION</source>
1988             <translation>Extrusion</translation>
1989         </message>
1990         <message>
1991             <source>STB_EXTRUSION_ALONG</source>
1992             <translation>Extrusion along a path</translation>
1993         </message>
1994         <message>
1995             <source>STB_FACES</source>
1996             <translation>Faces</translation>
1997         </message>
1998         <message>
1999             <source>STB_FREE_BORDER</source>
2000             <translation>Free Borders</translation>
2001         </message>
2002         <message>
2003             <source>STB_FREE_EDGE</source>
2004             <translation>Free Edges</translation>
2005         </message>
2006         <message>
2007             <source>STB_GLOBAL_HYPO</source>
2008             <translation>Global Hypothesis</translation>
2009         </message>
2010         <message>
2011             <source>STB_HEXA</source>
2012             <translation>Hexahedron</translation>
2013         </message>
2014         <message>
2015             <source>STB_HIDE</source>
2016             <translation>Hide</translation>
2017         </message>
2018         <message>
2019             <source>STB_INT_GROUP</source>
2020             <translation>Intersect Groups</translation>
2021         </message>
2022         <message>
2023             <source>STB_INV</source>
2024             <translation>Diagonal Inversion</translation>
2025         </message>
2026         <message>
2027             <source>STB_LENGTH</source>
2028             <translation>Length</translation>
2029         </message>
2030         <message>
2031             <source>STB_LENGTH_2D</source>
2032             <translation>Length 2D</translation>
2033         </message>
2034         <message>
2035             <source>STB_MAP</source>
2036             <translation>Pattern mapping</translation>
2037         </message>
2038         <message>
2039             <source>STB_MED</source>
2040             <translation>Import MED file</translation>
2041         </message>
2042         <message>
2043             <source>STB_MERGE</source>
2044             <translation>Merge nodes</translation>
2045         </message>
2046         <message>
2047             <source>STB_MERGE_ELEMENTS</source>
2048             <translation>Merge elements</translation>
2049         </message>
2050         <message>
2051             <source>STB_MESH_THROU_POINT</source>
2052             <translation>Mesh to pass through a point</translation>
2053         </message>
2054         <message>
2055             <source>STB_MIN_ANG</source>
2056             <translation>Minimum Angle</translation>
2057         </message>
2058         <message>
2059             <source>STB_MOVE</source>
2060             <translation>Move Node</translation>
2061         </message>
2062         <message>
2063             <source>STB_NODE</source>
2064             <translation>Node</translation>
2065         </message>
2066         <message>
2067             <source>STB_NODES</source>
2068             <translation>Nodes</translation>
2069         </message>
2070         <message>
2071             <source>STB_NUM_ELEMENTS</source>
2072             <translation>Display Elements</translation>
2073         </message>
2074         <message>
2075             <source>STB_NUM_NODES</source>
2076             <translation>Display Nodes</translation>
2077         </message>
2078         <message>
2079             <source>STB_ORIENT</source>
2080             <translation>Orientation</translation>
2081         </message>
2082         <message>
2083             <source>STB_POLYGON</source>
2084             <translation>Polygon</translation>
2085         </message>
2086         <message>
2087             <source>STB_POLYHEDRON</source>
2088             <translation>Polyhedron</translation>
2089         </message>
2090         <message>
2091             <source>STB_PRECISION</source>
2092             <translation>Precision</translation>
2093         </message>
2094         <message>
2095             <source>STB_QUAD</source>
2096             <translation>Quadrangle</translation>
2097         </message>
2098         <message>
2099             <source>STB_QUADRATIC_EDGE</source>
2100             <translation>Quadratic Edge</translation>
2101         </message>
2102         <message>
2103             <source>STB_QUADRATIC_HEXAHEDRON</source>
2104             <translation>Quadratic Hexahedron</translation>
2105         </message>
2106         <message>
2107             <source>STB_QUADRATIC_PENTAHEDRON</source>
2108             <translation>Quadratic Pentahedron</translation>
2109         </message>
2110         <message>
2111             <source>STB_QUADRATIC_PYRAMID</source>
2112             <translation>Quadratic Pyramid</translation>
2113         </message>
2114         <message>
2115             <source>STB_QUADRATIC_QUADRANGLE</source>
2116             <translation>Quadratic Quadrangle</translation>
2117         </message>
2118         <message>
2119             <source>STB_QUADRATIC_TETRAHEDRON</source>
2120             <translation>Quadratic Tetrahedron</translation>
2121         </message>
2122         <message>
2123             <source>STB_QUADRATIC_TRIANGLE</source>
2124             <translation>Quadratic Triangle</translation>
2125         </message>
2126         <message>
2127             <source>STB_REMOVE_ELEMENTS</source>
2128             <translation>Remove elements</translation>
2129         </message>
2130         <message>
2131             <source>STB_REMOVE_NODES</source>
2132             <translation>Remove nodes</translation>
2133         </message>
2134         <message>
2135             <source>STB_RENAME</source>
2136             <translation>Rename</translation>
2137         </message>
2138         <message>
2139             <source>STB_RENUM_ELEMENTS</source>
2140             <translation>Renumbering elements</translation>
2141         </message>
2142         <message>
2143             <source>STB_RENUM_NODES</source>
2144             <translation>Renumbering nodes</translation>
2145         </message>
2146         <message>
2147             <source>STB_RESET</source>
2148             <translation>Reset</translation>
2149         </message>
2150         <message>
2151             <source>STB_REVOLUTION</source>
2152             <translation>Revolution</translation>
2153         </message>
2154         <message>
2155             <source>STB_ROT</source>
2156             <translation>Rotation</translation>
2157         </message>
2158         <message>
2159             <source>STB_SCALAR_BAR</source>
2160             <translation>Scalar bar</translation>
2161         </message>
2162         <message>
2163             <source>STB_SCALAR_BAR_PROP</source>
2164             <translation>Scalar bar Properties</translation>
2165         </message>
2166         <message>
2167             <source>STB_SELECTION</source>
2168             <translation>Selection</translation>
2169         </message>
2170         <message>
2171             <source>STB_SEL_FILTER_LIB</source>
2172             <translation>Selection filters library</translation>
2173         </message>
2174         <message>
2175             <source>STB_SEW</source>
2176             <translation>Sewing</translation>
2177         </message>
2178         <message>
2179             <source>STB_SHADE</source>
2180             <translation>Shading</translation>
2181         </message>
2182         <message>
2183             <source>STB_SHOW</source>
2184             <translation>Show</translation>
2185         </message>
2186         <message>
2187             <source>STB_SHRINK</source>
2188             <translation>Shrink</translation>
2189         </message>
2190         <message>
2191             <source>STB_SKEW</source>
2192             <translation>Skew</translation>
2193         </message>
2194         <message>
2195             <source>STB_SMOOTH</source>
2196             <translation>Smoothing</translation>
2197         </message>
2198         <message>
2199             <source>STB_STD_INFO</source>
2200             <translation>Standard Mesh Infos</translation>
2201         </message>
2202         <message>
2203             <source>STB_SYM</source>
2204             <translation>Symmetry</translation>
2205         </message>
2206         <message>
2207             <source>STB_TAPER</source>
2208             <translation>Taper</translation>
2209         </message>
2210         <message>
2211             <source>STB_TETRA</source>
2212             <translation>Tetrahedron</translation>
2213         </message>
2214         <message>
2215             <source>STB_TRANS</source>
2216             <translation>Translation</translation>
2217         </message>
2218         <message>
2219             <source>STB_TRANSP</source>
2220             <translation>Transparency</translation>
2221         </message>
2222         <message>
2223             <source>STB_TRIANGLE</source>
2224             <translation>Triangle</translation>
2225         </message>
2226         <message>
2227             <source>STB_UNASSIGN</source>
2228             <translation>Unassign</translation>
2229         </message>
2230         <message>
2231             <source>STB_UNION</source>
2232             <translation>Union of triangles</translation>
2233         </message>
2234         <message>
2235             <source>STB_UNION2</source>
2236             <translation>Union of two triangles</translation>
2237         </message>
2238         <message>
2239             <source>STB_UNV</source>
2240             <translation>Import UNV file</translation>
2241         </message>
2242         <message>
2243             <source>STB_UN_GROUP</source>
2244             <translation>Union Groups</translation>
2245         </message>
2246         <message>
2247             <source>STB_UPDATE</source>
2248             <translation>Update</translation>
2249         </message>
2250         <message>
2251             <source>STB_VOLUMES</source>
2252             <translation>Volumes</translation>
2253         </message>
2254         <message>
2255             <source>STB_VOLUME_3D</source>
2256             <translation>Volume</translation>
2257         </message>
2258         <message>
2259             <source>STB_WARP</source>
2260             <translation>Warping angle</translation>
2261         </message>
2262         <message>
2263             <source>STB_WHAT_IS</source>
2264             <translation>Mesh Element Info</translation>
2265         </message>
2266         <message>
2267             <source>STB_WIRE</source>
2268             <translation>Wireframe</translation>
2269         </message>
2270         <message>
2271             <source>TAPER_ELEMENTS</source>
2272             <translation>Taper</translation>
2273         </message>
2274         <message>
2275             <source>TB_ADD_REMOVE</source>
2276             <translation>Add/Remove Toolbar</translation>
2277         </message>
2278         <message>
2279             <source>TB_CTRL</source>
2280             <translation>Controls Toolbar</translation>
2281         </message>
2282         <message>
2283             <source>TB_DISP_MODE</source>
2284             <translation>Display Mode Toolbar</translation>
2285         </message>
2286         <message>
2287             <source>TB_HYPO</source>
2288             <translation>Hypotheses Toolbar</translation>
2289         </message>
2290         <message>
2291             <source>TB_MESH</source>
2292             <translation>Mesh Toolbar</translation>
2293         </message>
2294         <message>
2295             <source>TB_MODIFY</source>
2296             <translation>Modification Toolbar</translation>
2297         </message>
2298         <message>
2299             <source>TOP_ADV_INFO</source>
2300             <translation>Advanced Mesh Infos</translation>
2301         </message>
2302         <message>
2303             <source>TOP_ALL</source>
2304             <translation>All</translation>
2305         </message>
2306         <message>
2307             <source>TOP_AREA</source>
2308             <translation>Area</translation>
2309         </message>
2310         <message>
2311             <source>TOP_ASPECT</source>
2312             <translation>Aspect Ratio</translation>
2313         </message>
2314         <message>
2315             <source>TOP_ASPECT_3D</source>
2316             <translation>Aspect Ratio 3D</translation>
2317         </message>
2318         <message>
2319             <source>TOP_AUTO_COLOR</source>
2320             <translation>Auto color</translation>
2321         </message>
2322         <message>
2323             <source>TOP_AUTO_UPD</source>
2324             <translation>Automatic update</translation>
2325         </message>
2326         <message>
2327             <source>TOP_BUILD_COMPOUND</source>
2328             <translation>Build Compound Mesh</translation>
2329         </message>
2330         <message>
2331             <source>TOP_CLIP</source>
2332             <translation>Clipping</translation>
2333         </message>
2334         <message>
2335             <source>TOP_COLORS</source>
2336             <translation>Colors / Size</translation>
2337         </message>
2338         <message>
2339             <source>TOP_COMPUTE</source>
2340             <translation>Compute</translation>
2341         </message>
2342         <message>
2343             <source>TOP_CONNECTION</source>
2344             <translation>Borders at Multi-Connection</translation>
2345         </message>
2346         <message>
2347             <source>TOP_CONNECTION_2D</source>
2348             <translation>Borders at Multi-Connection 2D</translation>
2349         </message>
2350         <message>
2351             <source>TOP_CONSTRUCT_GROUP</source>
2352             <translation>Construct Group</translation>
2353         </message>
2354         <message>
2355             <source>TOP_CONV_TO_QUAD</source>
2356             <translation>Convert to/from quadratic</translation>
2357         </message>
2358         <message>
2359             <source>TOP_CREATE_GROUP</source>
2360             <translation>Create Group</translation>
2361         </message>
2362         <message>
2363             <source>TOP_CREATE_MESH</source>
2364             <translation>Create Mesh</translation>
2365         </message>
2366         <message>
2367             <source>TOP_CREATE_SUBMESH</source>
2368             <translation>Create Sub-mesh</translation>
2369         </message>
2370         <message>
2371             <source>TOP_CUT</source>
2372             <translation>Cutting of quadrangles</translation>
2373         </message>
2374         <message>
2375             <source>TOP_CUT_GROUP</source>
2376             <translation>Cut Groups</translation>
2377         </message>
2378         <message>
2379             <source>TOP_DAT</source>
2380             <translation>Import DAT file</translation>
2381         </message>
2382         <message>
2383             <source>TOP_DELETE</source>
2384             <translation>Delete</translation>
2385         </message>
2386         <message>
2387             <source>TOP_DEL_GROUP</source>
2388             <translation>Delete Groups</translation>
2389         </message>
2390         <message>
2391             <source>TOP_DISABLE_AUTO_COLOR</source>
2392             <translation>Disable auto color</translation>
2393         </message>
2394         <message>
2395             <source>TOP_DISPLAY_ONLY</source>
2396             <translation>Show only</translation>
2397         </message>
2398         <message>
2399             <source>TOP_DISP_ENT</source>
2400             <translation>Display entity</translation>
2401         </message>
2402         <message>
2403             <source>TOP_EDGE</source>
2404             <translation>Edge</translation>
2405         </message>
2406         <message>
2407             <source>TOP_EDGES</source>
2408             <translation>Edges</translation>
2409         </message>
2410         <message>
2411             <source>TOP_EDIT_GROUP</source>
2412             <translation>Edit Group</translation>
2413         </message>
2414         <message>
2415             <source>TOP_EDIT_HYPO</source>
2416             <translation>Edit Hypothesis</translation>
2417         </message>
2418         <message>
2419             <source>TOP_EDIT_MESHSUBMESH</source>
2420             <translation>Edit Mesh/Sub-mesh</translation>
2421         </message>
2422         <message>
2423             <source>TOP_EXPORT_DAT</source>
2424             <translation>Export to DAT file</translation>
2425         </message>
2426         <message>
2427             <source>TOP_EXPORT_MED</source>
2428             <translation>Export to MED file</translation>
2429         </message>
2430         <message>
2431             <source>TOP_EXPORT_STL</source>
2432             <translation>Export to STL file</translation>
2433         </message>
2434         <message>
2435             <source>TOP_EXPORT_UNV</source>
2436             <translation>Export to UNV file</translation>
2437         </message>
2438         <message>
2439             <source>TOP_EXTRUSION</source>
2440             <translation>Extrusion</translation>
2441         </message>
2442         <message>
2443             <source>TOP_EXTRUSION_ALONG</source>
2444             <translation>Extrusion along a path</translation>
2445         </message>
2446         <message>
2447             <source>TOP_FACES</source>
2448             <translation>Faces</translation>
2449         </message>
2450         <message>
2451             <source>TOP_FREE_BORDER</source>
2452             <translation>Free Borders</translation>
2453         </message>
2454         <message>
2455             <source>TOP_FREE_EDGE</source>
2456             <translation>Free Edges</translation>
2457         </message>
2458         <message>
2459             <source>TOP_GLOBAL_HYPO</source>
2460             <translation>Global Hypothesis</translation>
2461         </message>
2462         <message>
2463             <source>TOP_HEXA</source>
2464             <translation>Hexahedron</translation>
2465         </message>
2466         <message>
2467             <source>TOP_HIDE</source>
2468             <translation>Hide</translation>
2469         </message>
2470         <message>
2471             <source>TOP_INT_GROUP</source>
2472             <translation>Intersect Groups</translation>
2473         </message>
2474         <message>
2475             <source>TOP_INV</source>
2476             <translation>Diagonal Inversion</translation>
2477         </message>
2478         <message>
2479             <source>TOP_LENGTH</source>
2480             <translation>Length</translation>
2481         </message>
2482         <message>
2483             <source>TOP_LENGTH_2D</source>
2484             <translation>Length 2D</translation>
2485         </message>
2486         <message>
2487             <source>TOP_MAP</source>
2488             <translation>Pattern mapping</translation>
2489         </message>
2490         <message>
2491             <source>TOP_MED</source>
2492             <translation>Import MED file</translation>
2493         </message>
2494         <message>
2495             <source>TOP_MERGE</source>
2496             <translation>Merge nodes</translation>
2497         </message>
2498         <message>
2499             <source>TOP_MERGE_ELEMENTS</source>
2500             <translation>Merge elements</translation>
2501         </message>
2502         <message>
2503             <source>TOP_MESH_THROU_POINT</source>
2504             <translation>Mesh to pass through a point</translation>
2505         </message>
2506         <message>
2507             <source>TOP_MIN_ANG</source>
2508             <translation>Minimum Angle</translation>
2509         </message>
2510         <message>
2511             <source>TOP_MOVE</source>
2512             <translation>Move Node</translation>
2513         </message>
2514         <message>
2515             <source>TOP_NODE</source>
2516             <translation>Node</translation>
2517         </message>
2518         <message>
2519             <source>TOP_NODES</source>
2520             <translation>Nodes</translation>
2521         </message>
2522         <message>
2523             <source>TOP_NUM_ELEMENTS</source>
2524             <translation>Display Elements</translation>
2525         </message>
2526         <message>
2527             <source>TOP_NUM_NODES</source>
2528             <translation>Display Nodes</translation>
2529         </message>
2530         <message>
2531             <source>TOP_ORIENT</source>
2532             <translation>Orientation</translation>
2533         </message>
2534         <message>
2535             <source>TOP_POLYGON</source>
2536             <translation>Polygon</translation>
2537         </message>
2538         <message>
2539             <source>TOP_POLYHEDRON</source>
2540             <translation>Polyhedron</translation>
2541         </message>
2542         <message>
2543             <source>TOP_PRECISION</source>
2544             <translation>Precision</translation>
2545         </message>
2546         <message>
2547             <source>TOP_QUAD</source>
2548             <translation>Quadrangle</translation>
2549         </message>
2550         <message>
2551             <source>TOP_QUADRATIC_EDGE</source>
2552             <translation>Quadratic Edge</translation>
2553         </message>
2554         <message>
2555             <source>TOP_QUADRATIC_HEXAHEDRON</source>
2556             <translation>Quadratic Hexahedron</translation>
2557         </message>
2558         <message>
2559             <source>TOP_QUADRATIC_PENTAHEDRON</source>
2560             <translation>Quadratic Pentahedron</translation>
2561         </message>
2562         <message>
2563             <source>TOP_QUADRATIC_PYRAMID</source>
2564             <translation>Quadratic Pyramid</translation>
2565         </message>
2566         <message>
2567             <source>TOP_QUADRATIC_QUADRANGLE</source>
2568             <translation>Quadratic Quadrangle</translation>
2569         </message>
2570         <message>
2571             <source>TOP_QUADRATIC_TETRAHEDRON</source>
2572             <translation>Quadratic Tetrahedron</translation>
2573         </message>
2574         <message>
2575             <source>TOP_QUADRATIC_TRIANGLE</source>
2576             <translation>Quadratic Triangle</translation>
2577         </message>
2578         <message>
2579             <source>TOP_REMOVE_ELEMENTS</source>
2580             <translation>Remove elements</translation>
2581         </message>
2582         <message>
2583             <source>TOP_REMOVE_NODES</source>
2584             <translation>Remove nodes</translation>
2585         </message>
2586         <message>
2587             <source>TOP_RENAME</source>
2588             <translation>Rename</translation>
2589         </message>
2590         <message>
2591             <source>TOP_RENUM_ELEMENTS</source>
2592             <translation>Renumbering elements</translation>
2593         </message>
2594         <message>
2595             <source>TOP_RENUM_NODES</source>
2596             <translation>Renumbering nodes</translation>
2597         </message>
2598         <message>
2599             <source>TOP_RESET</source>
2600             <translation>Reset</translation>
2601         </message>
2602         <message>
2603             <source>TOP_REVOLUTION</source>
2604             <translation>Revolution</translation>
2605         </message>
2606         <message>
2607             <source>TOP_ROT</source>
2608             <translation>Rotation</translation>
2609         </message>
2610         <message>
2611             <source>TOP_SCALAR_BAR</source>
2612             <translation>Scalar bar</translation>
2613         </message>
2614         <message>
2615             <source>TOP_SCALAR_BAR_PROP</source>
2616             <translation>Scalar bar Properties</translation>
2617         </message>
2618         <message>
2619             <source>TOP_SELECTION</source>
2620             <translation>Selection</translation>
2621         </message>
2622         <message>
2623             <source>TOP_SEL_FILTER_LIB</source>
2624             <translation>Selection filters library</translation>
2625         </message>
2626         <message>
2627             <source>TOP_SEW</source>
2628             <translation>Sewing</translation>
2629         </message>
2630         <message>
2631             <source>TOP_SHADE</source>
2632             <translation>Shading</translation>
2633         </message>
2634         <message>
2635             <source>TOP_SHOW</source>
2636             <translation>Show</translation>
2637         </message>
2638         <message>
2639             <source>TOP_SHRINK</source>
2640             <translation>Shrink</translation>
2641         </message>
2642         <message>
2643             <source>TOP_SKEW</source>
2644             <translation>Skew</translation>
2645         </message>
2646         <message>
2647             <source>TOP_SMOOTH</source>
2648             <translation>Smoothing</translation>
2649         </message>
2650         <message>
2651             <source>TOP_STD_INFO</source>
2652             <translation>Standard Mesh Infos</translation>
2653         </message>
2654         <message>
2655             <source>TOP_SYM</source>
2656             <translation>Symmetry</translation>
2657         </message>
2658         <message>
2659             <source>TOP_TAPER</source>
2660             <translation>Taper</translation>
2661         </message>
2662         <message>
2663             <source>TOP_TETRA</source>
2664             <translation>Tetrahedron</translation>
2665         </message>
2666         <message>
2667             <source>TOP_TRANS</source>
2668             <translation>Translation</translation>
2669         </message>
2670         <message>
2671             <source>TOP_TRANSP</source>
2672             <translation>Transparency</translation>
2673         </message>
2674         <message>
2675             <source>TOP_TRIANGLE</source>
2676             <translation>Triangle</translation>
2677         </message>
2678         <message>
2679             <source>TOP_UNASSIGN</source>
2680             <translation>Unassign</translation>
2681         </message>
2682         <message>
2683             <source>TOP_UNION</source>
2684             <translation>Union of triangles</translation>
2685         </message>
2686         <message>
2687             <source>TOP_UNION2</source>
2688             <translation>Union of two triangles</translation>
2689         </message>
2690         <message>
2691             <source>TOP_UNV</source>
2692             <translation>Import UNV file</translation>
2693         </message>
2694         <message>
2695             <source>TOP_UN_GROUP</source>
2696             <translation>Union Groups</translation>
2697         </message>
2698         <message>
2699             <source>TOP_UPDATE</source>
2700             <translation>Update</translation>
2701         </message>
2702         <message>
2703             <source>TOP_VOLUMES</source>
2704             <translation>Volumes</translation>
2705         </message>
2706         <message>
2707             <source>TOP_VOLUME_3D</source>
2708             <translation>Volume</translation>
2709         </message>
2710         <message>
2711             <source>TOP_WARP</source>
2712             <translation>Warping angle</translation>
2713         </message>
2714         <message>
2715             <source>TOP_WHAT_IS</source>
2716             <translation>Mesh Element Info</translation>
2717         </message>
2718         <message>
2719             <source>TOP_WIRE</source>
2720             <translation>Wireframe</translation>
2721         </message>
2722         <message>
2723             <source>VOLUME_3D_ELEMENTS</source>
2724             <translation>Area</translation>
2725         </message>
2726         <message>
2727             <source>WARP_ELEMENTS</source>
2728             <translation>Warping</translation>
2729         </message>
2730     </context>
2731     <context>
2732         <name>SMESHGUI</name>
2733         <message>
2734             <source>NOT_A_VTK_VIEWER</source>
2735             <translation>This command is available in VTK viewer only
2736 Please, create VTK viewer and try again</translation>
2737         </message>
2738         <message>
2739             <source>PREF_AUTO_GROUPS</source>
2740             <translation>Automatically create groups for MED export</translation>
2741         </message>
2742         <message>
2743             <source>PREF_AUTO_UPDATE</source>
2744             <translation>Automatic update</translation>
2745         </message>
2746         <message>
2747             <source>PREF_BACKFACE</source>
2748             <translation>Back face</translation>
2749         </message>
2750         <message>
2751             <source>PREF_COLOR</source>
2752             <translation>Color</translation>
2753         </message>
2754         <message>
2755             <source>PREF_DISPLAY_ENTITY</source>
2756             <translation>Display entity</translation>
2757         </message>
2758         <message>
2759             <source>PREF_DISPLAY_MODE</source>
2760             <translation>Display mode</translation>
2761         </message>
2762         <message>
2763             <source>PREF_ELEMENTS</source>
2764             <translation>Elements</translation>
2765         </message>
2766         <message>
2767             <source>PREF_ELEMENT_COLOR</source>
2768             <translation>Element color</translation>
2769         </message>
2770         <message>
2771             <source>PREF_FILL</source>
2772             <translation>Fill</translation>
2773         </message>
2774         <message>
2775             <source>PREF_GROUP_ELEMENTS</source>
2776             <translation>Elements</translation>
2777         </message>
2778         <message>
2779             <source>PREF_GROUP_EXPORT</source>
2780             <translation>Mesh export</translation>
2781         </message>
2782         <message>
2783             <source>PREF_GROUP_NODES</source>
2784             <translation>Nodes</translation>
2785         </message>
2786         <message>
2787             <source>PREF_GROUP_PRECISION</source>
2788             <translation>Precision</translation>
2789         </message>
2790         <message>
2791             <source>PREF_GROUP_PRESELECTION</source>
2792             <translation>Preselection</translation>
2793         </message>
2794         <message>
2795             <source>PREF_GROUP_QUALITY</source>
2796             <translation>Quality controls</translation>
2797         </message>
2798         <message>
2799             <source>PREF_GROUP_SELECTION</source>
2800             <translation>Selection</translation>
2801         </message>
2802         <message>
2803             <source>PREF_GROUP_UPDATE</source>
2804             <translation>Update</translation>
2805         </message>
2806         <message>
2807             <source>PREF_HIGHLIGHT_COLOR</source>
2808             <translation>Highlight color</translation>
2809         </message>
2810         <message>
2811             <source>PREF_LABELS_COLOR</source>
2812             <translation>Labels color</translation>
2813         </message>
2814         <message>
2815             <source>PREF_NODES</source>
2816             <translation>Nodes</translation>
2817         </message>
2818         <message>
2819             <source>PREF_OBJECTS</source>
2820             <translation>Objects</translation>
2821         </message>
2822         <message>
2823             <source>PREF_OBJECT_COLOR</source>
2824             <translation>Object color</translation>
2825         </message>
2826         <message>
2827             <source>PREF_OUTLINE</source>
2828             <translation>Outline</translation>
2829         </message>
2830         <message>
2831             <source>PREF_PRECISION_USE</source>
2832             <translation>Use precision</translation>
2833         </message>
2834         <message>
2835             <source>PREF_PRECISION_VALUE</source>
2836             <translation>Number of digits after point</translation>
2837         </message>
2838         <message>
2839             <source>PREF_RENUMBER</source>
2840             <translation>Automatic renumbering</translation>
2841         </message>
2842         <message>
2843             <source>PREF_SHRINK_COEFF</source>
2844             <translation>Shrink coef.</translation>
2845         </message>
2846         <message>
2847             <source>PREF_SIZE</source>
2848             <translation>Size</translation>
2849         </message>
2850         <message>
2851             <source>PREF_TAB_GENERAL</source>
2852             <translation>General</translation>
2853         </message>
2854         <message>
2855             <source>PREF_TAB_MESH</source>
2856             <translation>Mesh</translation>
2857         </message>
2858         <message>
2859             <source>PREF_TAB_SELECTION</source>
2860             <translation>Selection</translation>
2861         </message>
2862         <message>
2863             <source>PREF_TITLE_COLOR</source>
2864             <translation>Title color</translation>
2865         </message>
2866         <message>
2867             <source>PREF_WIDTH</source>
2868             <translation>Width</translation>
2869         </message>
2870     </context>
2871     <context>
2872         <name>SMESHGUI_AddQuadraticElementDlg</name>
2873         <message>
2874             <source>SMESH_ADD_QUADRATIC_EDGE</source>
2875             <translation>Add Quadratic Edge</translation>
2876         </message>
2877         <message>
2878             <source>SMESH_ADD_QUADRATIC_HEXAHEDRON</source>
2879             <translation>Add Quadratic Hexahedron</translation>
2880         </message>
2881         <message>
2882             <source>SMESH_ADD_QUADRATIC_PENTAHEDRON</source>
2883             <translation>Add Quadratic Pentahedron</translation>
2884         </message>
2885         <message>
2886             <source>SMESH_ADD_QUADRATIC_PYRAMID</source>
2887             <translation>Add Quadratic Pyramid</translation>
2888         </message>
2889         <message>
2890             <source>SMESH_ADD_QUADRATIC_QUADRANGLE</source>
2891             <translation>Add Quadratic Quadrangle</translation>
2892         </message>
2893         <message>
2894             <source>SMESH_ADD_QUADRATIC_TETRAHEDRON</source>
2895             <translation>Add Quadratic Tetrahedron</translation>
2896         </message>
2897         <message>
2898             <source>SMESH_ADD_QUADRATIC_TRIANGLE</source>
2899             <translation>Add Quadratic Triangle</translation>
2900         </message>
2901         <message>
2902             <source>SMESH_CORNER_NODES</source>
2903             <translation>Corner Nodes:</translation>
2904         </message>
2905         <message>
2906             <source>SMESH_FIRST</source>
2907             <translation>First</translation>
2908         </message>
2909         <message>
2910             <source>SMESH_LAST</source>
2911             <translation>Last</translation>
2912         </message>
2913         <message>
2914             <source>SMESH_MIDDLE</source>
2915             <translation>Middle</translation>
2916         </message>
2917     </context>
2918     <context>
2919         <name>SMESHGUI_BuildCompoundDlg</name>
2920         <message>
2921             <source>COMPOUND</source>
2922             <translation>Compound</translation>
2923         </message>
2924         <message>
2925             <source>COMPOUND_MESH</source>
2926             <translation>Compound_Mesh</translation>
2927         </message>
2928         <message>
2929             <source>CREATE_COMMON_GROUPS</source>
2930             <translation>Create common groups for initial meshes</translation>
2931         </message>
2932         <message>
2933             <source>MERGE_NODES_AND_ELEMENTS</source>
2934             <translation>Merge coincident nodes and elements</translation>
2935         </message>
2936         <message>
2937             <source>MESHES</source>
2938             <translation>Meshes</translation>
2939         </message>
2940         <message>
2941             <source>PROCESSING_IDENTICAL_GROUPS</source>
2942             <translation>Processing identical groups</translation>
2943         </message>
2944         <message>
2945             <source>RENAME</source>
2946             <translation>Rename</translation>
2947         </message>
2948         <message>
2949             <source>RESULT_NAME</source>
2950             <translation>Result name</translation>
2951         </message>
2952         <message>
2953             <source>UNITE</source>
2954             <translation>Unite</translation>
2955         </message>
2956     </context>
2957     <context>
2958         <name>SMESHGUI_ChangeOrientationDlg</name>
2959         <message>
2960             <source>CAPTION</source>
2961             <translation>Modification of orientation</translation>
2962         </message>
2963     </context>
2964     <context>
2965         <name>SMESHGUI_ComputeDlg</name>
2966         <message>
2967             <source>CAPTION</source>
2968             <translation>Compute mesh failed</translation>
2969         </message>
2970         <message>
2971             <source>CONSTRUCTOR</source>
2972             <translation>Compute mesh</translation>
2973         </message>
2974         <message>
2975             <source>ERRORS</source>
2976             <translation>Errors</translation>
2977         </message>
2978         <message>
2979             <source>MEMORY_LACK</source>
2980             <translation>Memory allocation problem</translation>
2981         </message>
2982         <message>
2983             <source>PUBLISH_SHAPE</source>
2984             <translation>Publish SubShape</translation>
2985         </message>
2986         <message>
2987             <source>SHOW_SHAPE</source>
2988             <translation>Show SubShape</translation>
2989         </message>
2990     </context>
2991     <context>
2992         <name>SMESHGUI_ConvToQuadDlg</name>
2993         <message>
2994             <source>CAPTION</source>
2995             <translation>Convert to/from quadratic</translation>
2996         </message>
2997         <message>
2998             <source>MEDIUMNDS</source>
2999             <translation>Medium nodes on geometry</translation>
3000         </message>
3001         <message>
3002             <source>MESH</source>
3003             <translation>Mesh</translation>
3004         </message>
3005         <message>
3006             <source>RADIOBTN_1</source>
3007             <translation>Convert to quadratic</translation>
3008         </message>
3009         <message>
3010             <source>RADIOBTN_2</source>
3011             <translation>Convert from quadratic</translation>
3012         </message>
3013     </context>
3014     <context>
3015         <name>SMESHGUI_ConvToQuadOp</name>
3016         <message>
3017             <source>MESH_IS_NOT_SELECTED</source>
3018             <translation>Mesh is not selected
3019 Please specify it and try again</translation>
3020         </message>
3021         <message>
3022             <source>REF_IS_NULL</source>
3023             <translation>No valid mesh object selected</translation>
3024         </message>
3025     </context>
3026     <context>
3027         <name>SMESHGUI_CreatePatternDlg</name>
3028         <message>
3029             <source>CAPTION</source>
3030             <translation>Pattern Creation</translation>
3031         </message>
3032         <message>
3033             <source>DEFAULT_2D</source>
3034             <translation>Pattern_2d</translation>
3035         </message>
3036         <message>
3037             <source>DEFAULT_3D</source>
3038             <translation>Pattern_3d</translation>
3039         </message>
3040         <message>
3041             <source>ERROR_OF_CREATION</source>
3042             <translation>Internal error occurs during pattern creation
3043 Please verify validity of entered information</translation>
3044         </message>
3045         <message>
3046             <source>ERROR_OF_SAVING</source>
3047             <translation>Internal error occurs during pattern saving. Please verify
3048 \free disk space and your write permission to this file</translation>
3049         </message>
3050         <message>
3051             <source>ERR_LOADF_CANT_PROJECT</source>
3052             <translation>Impossible to perform projection of nodes to the face</translation>
3053         </message>
3054         <message>
3055             <source>ERR_LOADF_CLOSED_FACE</source>
3056             <translation>It is impossible to create pattern from face having seam edge</translation>
3057         </message>
3058         <message>
3059             <source>ERR_LOADF_NARROW_FACE</source>
3060             <translation>It is impossible to create pattern from narrow face</translation>
3061         </message>
3062         <message>
3063             <source>ERR_LOADV_BAD_SHAPE</source>
3064             <translation>Pattern can be created from closed shell or solid with 6 faces only</translation>
3065         </message>
3066         <message>
3067             <source>ERR_LOADV_COMPUTE_PARAMS</source>
3068             <translation>It is impossible to compute point parameters</translation>
3069         </message>
3070         <message>
3071             <source>ERR_LOAD_EMPTY_SUBMESH</source>
3072             <translation>There are no elements to create pattern</translation>
3073         </message>
3074         <message>
3075             <source>MESH_OR_SUBMESH</source>
3076             <translation>Mesh or SubMesh</translation>
3077         </message>
3078         <message>
3079             <source>PATTERN</source>
3080             <translation>Pattern</translation>
3081         </message>
3082         <message>
3083             <source>PATTERN_FILT</source>
3084             <translation>Pattern files(*.smp)</translation>
3085         </message>
3086         <message>
3087             <source>PATTERN_NAME</source>
3088             <translation>Pattern name</translation>
3089         </message>
3090         <message>
3091             <source>PATTERN_TYPE</source>
3092             <translation>Pattern type</translation>
3093         </message>
3094         <message>
3095             <source>PROJECT</source>
3096             <translation>Project nodes on the face</translation>
3097         </message>
3098         <message>
3099             <source>SAVE</source>
3100             <translation>Save...</translation>
3101         </message>
3102         <message>
3103             <source>SAVE_PATTERN</source>
3104             <translation>Save Pattern</translation>
3105         </message>
3106     </context>
3107     <context>
3108         <name>SMESHGUI_CreatePolyhedralVolumeDlg</name>
3109         <message>
3110             <source>FACES_BY_NODES</source>
3111             <translation>Faces by nodes</translation>
3112         </message>
3113         <message>
3114             <source>SMESH_POLYEDRE_CREATE_ERROR</source>
3115             <translation>Polyhedron creation error.</translation>
3116         </message>
3117         <message>
3118             <source>SMESH_POLYEDRE_PREVIEW</source>
3119             <translation>Polyhedron preview</translation>
3120         </message>
3121     </context>
3122     <context>
3123         <name>SMESHGUI_CuttingOfQuadsDlg</name>
3124         <message>
3125             <source>CAPTION</source>
3126             <translation>Cutting of quadrangles</translation>
3127         </message>
3128     </context>
3129     <context>
3130         <name>SMESHGUI_DeleteGroupDlg</name>
3131         <message>
3132             <source>CAPTION</source>
3133             <translation>Delete groups with contents</translation>
3134         </message>
3135         <message>
3136             <source>NO_SELECTED_GROUPS</source>
3137             <translation>There are no selected groups
3138 Please select a groups and try again</translation>
3139         </message>
3140         <message>
3141             <source>SELECTED_GROUPS</source>
3142             <translation>Selected groups</translation>
3143         </message>
3144     </context>
3145     <context>
3146         <name>SMESHGUI_EditMeshDlg</name>
3147         <message>
3148             <source>COINCIDENT_ELEMENTS</source>
3149             <translation>Coincident elements</translation>
3150         </message>
3151         <message>
3152             <source>COINCIDENT_NODES</source>
3153             <translation>Coincident nodes</translation>
3154         </message>
3155         <message>
3156             <source>DETECT</source>
3157             <translation>Detect</translation>
3158         </message>
3159         <message>
3160             <source>EDIT_SELECTED_GROUP</source>
3161             <translation>Edit selected group</translation>
3162         </message>
3163         <message>
3164             <source>SELECT_ALL</source>
3165             <translation>Select all</translation>
3166         </message>
3167     </context>
3168     <context>
3169         <name>SMESHGUI_ExtrusionAlongPathDlg</name>
3170         <message>
3171             <source>BAD_SHAPE_TYPE</source>
3172             <translation>The shape selected for the path is not edge</translation>
3173         </message>
3174         <message>
3175             <source>CANT_GET_TANGENT</source>
3176             <translation>Can't get tangent for one of the path nodes</translation>
3177         </message>
3178         <message>
3179             <source>EXTRUSION_1D</source>
3180             <translation>Extrusion of 1D elements</translation>
3181         </message>
3182         <message>
3183             <source>EXTRUSION_2D</source>
3184             <translation>Extrusion of 2D elements</translation>
3185         </message>
3186         <message>
3187             <source>EXTRUSION_ALONG_PATH</source>
3188             <translation>Extrusion along a path</translation>
3189         </message>
3190         <message>
3191             <source>EXTR_BAD_STARTING_NODE</source>
3192             <translation>Wrong path starting node</translation>
3193         </message>
3194         <message>
3195             <source>LINEAR_ANGLES</source>
3196             <translation>Linear variation of the angles</translation>
3197         </message>
3198         <message>
3199             <source>NO_ELEMENTS_SELECTED</source>
3200             <translation>No mesh elements are selected for extrusion</translation>
3201         </message>
3202         <message>
3203             <source>SELECTED_PATH_IS_NOT_EDGE</source>
3204             <translation>Path mesh should be of edge type</translation>
3205         </message>
3206         <message>
3207             <source>SMESH_ANGLES</source>
3208             <translation>Rotation Angles</translation>
3209         </message>
3210         <message>
3211             <source>SMESH_BASE_POINT</source>
3212             <translation>Base Point</translation>
3213         </message>
3214         <message>
3215             <source>SMESH_PATH</source>
3216             <translation>Path</translation>
3217         </message>
3218         <message>
3219             <source>SMESH_PATH_MESH</source>
3220             <translation>Mesh</translation>
3221         </message>
3222         <message>
3223             <source>SMESH_PATH_SHAPE</source>
3224             <translation>Shape (edge)</translation>
3225         </message>
3226         <message>
3227             <source>SMESH_PATH_START</source>
3228             <translation>Start node</translation>
3229         </message>
3230         <message>
3231             <source>SMESH_USE_ANGLES</source>
3232             <translation>Use Angles</translation>
3233         </message>
3234         <message>
3235             <source>SMESH_USE_BASE_POINT</source>
3236             <translation>Use Base Point</translation>
3237         </message>
3238         <message>
3239             <source>WRONG_ANGLES_NUMBER</source>
3240             <translation>The number of angles should correspond to the number of path nodes</translation>
3241         </message>
3242     </context>
3243     <context>
3244         <name>SMESHGUI_ExtrusionDlg</name>
3245         <message>
3246             <source>EXTRUSION_1D</source>
3247             <translation>Extrusion of 1D elements</translation>
3248         </message>
3249         <message>
3250             <source>EXTRUSION_2D</source>
3251             <translation>Extrusion of 2D elements</translation>
3252         </message>
3253         <message>
3254             <source>EXTRUSION_ALONG_LINE</source>
3255             <translation>Extrusion along a line</translation>
3256         </message>
3257     </context>
3258     <context>
3259         <name>SMESHGUI_FilterDlg</name>
3260         <message>
3261             <source>BAD_SHAPE_NAME</source>
3262             <translation>There is no "%1" geometrical object in the current study
3263 Please select valid object and try again</translation>
3264         </message>
3265         <message>
3266             <source>CURRENT_GROUP</source>
3267             <translation>Current Group</translation>
3268         </message>
3269         <message>
3270             <source>EDGES_TLT</source>
3271             <translation>Filter for Edges</translation>
3272         </message>
3273         <message>
3274             <source>FACES_TLT</source>
3275             <translation>Filter for Faces</translation>
3276         </message>
3277         <message>
3278             <source>MESH</source>
3279             <translation>Mesh</translation>
3280         </message>
3281         <message>
3282             <source>NODES_TLT</source>
3283             <translation>Filter for Nodes</translation>
3284         </message>
3285         <message>
3286             <source>SELECTION</source>
3287             <translation>Initial Selection</translation>
3288         </message>
3289         <message>
3290             <source>SET_IN_VIEWER</source>
3291             <translation>Insert filter in viewer</translation>
3292         </message>
3293         <message>
3294             <source>SHAPE_IS_NOT_A_CYLINDER</source>
3295             <translation>"%1" is not a cylinderical face
3296 Please select a cylindrical face and try again</translation>
3297         </message>
3298         <message>
3299             <source>SHAPE_IS_NOT_A_FACE</source>
3300             <translation>"%1" is not a face
3301 Please select a face and try again</translation>
3302         </message>
3303         <message>
3304             <source>SHAPE_IS_NOT_A_PLANE</source>
3305             <translation>"%1" is not a plane
3306 Please select a plane and try again</translation>
3307         </message>
3308         <message>
3309             <source>SOURCE</source>
3310             <translation>Source</translation>
3311         </message>
3312         <message>
3313             <source>TLT</source>
3314             <translation>Selection filter</translation>
3315         </message>
3316         <message>
3317             <source>VOLUMES_TLT</source>
3318             <translation>Filter for Volumes</translation>
3319         </message>
3320     </context>
3321     <context>
3322         <name>SMESHGUI_FilterLibraryDlg</name>
3323         <message>
3324             <source>ADD</source>
3325             <translation>Add</translation>
3326         </message>
3327         <message>
3328             <source>ADD_TO_TLT</source>
3329             <translation>Add selection filter to library</translation>
3330         </message>
3331         <message>
3332             <source>ALL_FILES_FILTER</source>
3333             <translation>All Files (*.*)</translation>
3334         </message>
3335         <message>
3336             <source>ASSIGN_NEW_NAME</source>
3337             <translation>Library already contains filter with name "%1"
3338 New name "%2" is assigned to added filter</translation>
3339         </message>
3340         <message>
3341             <source>COPY_FROM_TLT</source>
3342             <translation>Copy selection filter from library</translation>
3343         </message>
3344         <message>
3345             <source>DELETE</source>
3346             <translation>Delete</translation>
3347         </message>
3348         <message>
3349             <source>EDGE</source>
3350             <translation>Edge</translation>
3351         </message>
3352         <message>
3353             <source>EDIT_LIB_TLT</source>
3354             <translation>Selection filter library</translation>
3355         </message>
3356         <message>
3357             <source>ELEMENT</source>
3358             <translation>Element</translation>
3359         </message>
3360         <message>
3361             <source>EMPTY_FILTER_NAME</source>
3362             <translation>Name of the filter is empty
3363 Please enter a non-empty name</translation>
3364         </message>
3365         <message>
3366             <source>ERROR_FILTER_NAME</source>
3367             <translation>Name of the filter is not unique
3368 Please enter other name</translation>
3369         </message>
3370         <message>
3371             <source>ERROR_LOAD</source>
3372             <translation>It is impossible to load library
3373 Please check library file name and attributes</translation>
3374         </message>
3375         <message>
3376             <source>ERROR_OF_ADDING</source>
3377             <translation>Internal error occurs during adiing new filter in library.
3378 Please verify validity of entered information</translation>
3379         </message>
3380         <message>
3381             <source>ERROR_OF_COPYING</source>
3382             <translation>Internal error occurs during copying filter from library.
3383 Please verify validity of entered information</translation>
3384         </message>
3385         <message>
3386             <source>ERROR_OF_DELETING</source>
3387             <translation>Internal error occurs during deleting filter from library.
3388 Please verify validity of entered information</translation>
3389         </message>
3390         <message>
3391             <source>ERROR_OF_EDITING</source>
3392             <translation>Internal error occurs during editing filter library.
3393 Please verify validity of entered information</translation>
3394         </message>
3395         <message>
3396             <source>ERROR_OF_SAVING</source>
3397             <translation>Internal error occurs during saving filter library
3398 Please check input data and try again</translation>
3399         </message>
3400         <message>
3401             <source>FACE</source>
3402             <translation>Face</translation>
3403         </message>
3404         <message>
3405             <source>FILTER</source>
3406             <translation>Filter</translation>
3407         </message>
3408         <message>
3409             <source>FILTER_NAME</source>
3410             <translation>Filter name</translation>
3411         </message>
3412         <message>
3413             <source>FILTER_NAMES</source>
3414             <translation>Names of filters</translation>
3415         </message>
3416         <message>
3417             <source>LIBRARY_FILE</source>
3418             <translation>Library file name</translation>
3419         </message>
3420         <message>
3421             <source>LIBRARY_IS_NOT_LOADED</source>
3422             <translation>Library is not loaded. Please load library and try again</translation>
3423         </message>
3424         <message>
3425             <source>LIB_NAME</source>
3426             <translation>FilterLib.xml</translation>
3427         </message>
3428         <message>
3429             <source>NODE</source>
3430             <translation>Node</translation>
3431         </message>
3432         <message>
3433             <source>NO_PERMISSION</source>
3434             <translation>You do not have write permission to this file</translation>
3435         </message>
3436         <message>
3437             <source>OPEN_LIBRARY</source>
3438             <translation>Open library</translation>
3439         </message>
3440         <message>
3441             <source>SELECTION</source>
3442             <translation>Selection</translation>
3443         </message>
3444         <message>
3445             <source>VOLUME</source>
3446             <translation>Volume</translation>
3447         </message>
3448         <message>
3449             <source>XML_FILT</source>
3450             <translation>XML files(*.xml)</translation>
3451         </message>
3452     </context>
3453     <context>
3454         <name>SMESHGUI_FilterTable</name>
3455         <message>
3456             <source>ADD</source>
3457             <translation>Add</translation>
3458         </message>
3459         <message>
3460             <source>ADDITIONAL_PARAMETERS</source>
3461             <translation>Additional parameters</translation>
3462         </message>
3463         <message>
3464             <source>ADD_TO</source>
3465             <translation>Add to...</translation>
3466         </message>
3467         <message>
3468             <source>AND</source>
3469             <translation>And</translation>
3470         </message>
3471         <message>
3472             <source>AREA</source>
3473             <translation>Area</translation>
3474         </message>
3475         <message>
3476             <source>ASPECT_RATIO</source>
3477             <translation>Aspect ratio</translation>
3478         </message>
3479         <message>
3480             <source>ASPECT_RATIO_3D</source>
3481             <translation>Aspect ratio 3D</translation>
3482         </message>
3483         <message>
3484             <source>BAD_ORIENTED_VOLUME</source>
3485             <translation>Bad oriented volume</translation>
3486         </message>
3487         <message>
3488             <source>BELONG_TO_CYLINDER</source>
3489             <translation>Belong to Cylinder</translation>
3490         </message>
3491         <message>
3492             <source>BELONG_TO_GENSURFACE</source>
3493             <translation>Belong to Surface</translation>
3494         </message>
3495         <message>
3496             <source>BELONG_TO_GEOM</source>
3497             <translation>Belong to Geom</translation>
3498         </message>
3499         <message>
3500             <source>BELONG_TO_PLANE</source>
3501             <translation>Belong to Plane</translation>
3502         </message>
3503         <message>
3504             <source>BINARY</source>
3505             <translation>Binary</translation>
3506         </message>
3507         <message>
3508             <source>CLEAR</source>
3509             <translation>Clear</translation>
3510         </message>
3511         <message>
3512             <source>COMPARE</source>
3513             <translation>Compare</translation>
3514         </message>
3515         <message>
3516             <source>COPY_FROM</source>
3517             <translation>Copy from...</translation>
3518         </message>
3519         <message>
3520             <source>CRITERION</source>
3521             <translation>Criterion</translation>
3522         </message>
3523         <message>
3524             <source>EDGES</source>
3525             <translation>Edges</translation>
3526         </message>
3527         <message>
3528             <source>ENTITY_TYPE</source>
3529             <translation>Entity type</translation>
3530         </message>
3531         <message>
3532             <source>EQUAL_TO</source>
3533             <translation>Equal to</translation>
3534         </message>
3535         <message>
3536             <source>ERROR</source>
3537             <translation>Threshold value is not correctly specified
3538 Please enter correct value and try again</translation>
3539         </message>
3540         <message>
3541             <source>FACES</source>
3542             <translation>Faces</translation>
3543         </message>
3544         <message>
3545             <source>FILTER</source>
3546             <translation>Filter</translation>
3547         </message>
3548         <message>
3549             <source>FREE_BORDERS</source>
3550             <translation>Free borders</translation>
3551         </message>
3552         <message>
3553             <source>FREE_EDGES</source>
3554             <translation>Free edges</translation>
3555         </message>
3556         <message>
3557             <source>ID</source>
3558             <translation>ID</translation>
3559         </message>
3560         <message>
3561             <source>INSERT</source>
3562             <translation>Insert</translation>
3563         </message>
3564         <message>
3565             <source>LENGTH</source>
3566             <translation>Length</translation>
3567         </message>
3568         <message>
3569             <source>LESS_THAN</source>
3570             <translation>Less than</translation>
3571         </message>
3572         <message>
3573             <source>LYING_ON_GEOM</source>
3574             <translation>Lying on Geom</translation>
3575         </message>
3576         <message>
3577             <source>MINIMUM_ANGLE</source>
3578             <translation>Minimum angle</translation>
3579         </message>
3580         <message>
3581             <source>MORE_THAN</source>
3582             <translation>More than</translation>
3583         </message>
3584         <message>
3585             <source>MULTIEDGES_ERROR</source>
3586             <translation>Threshold value of borders at multi-connections can not be equal 1
3587 Please enter correct value and try again</translation>
3588         </message>
3589         <message>
3590             <source>MULTI_BORDERS</source>
3591             <translation>Borders at multi-connections</translation>
3592         </message>
3593         <message>
3594             <source>NODES</source>
3595             <translation>Nodes</translation>
3596         </message>
3597         <message>
3598             <source>NOT</source>
3599             <translation>Not</translation>
3600         </message>
3601         <message>
3602             <source>OR</source>
3603             <translation>Or</translation>
3604         </message>
3605         <message>
3606             <source>RANGE_OF_IDS</source>
3607             <translation>Range of IDs</translation>
3608         </message>
3609         <message>
3610             <source>REMOVE</source>
3611             <translation>Remove</translation>
3612         </message>
3613         <message>
3614             <source>SKEW</source>
3615             <translation>Skew</translation>
3616         </message>
3617         <message>
3618             <source>TAPER</source>
3619             <translation>Taper</translation>
3620         </message>
3621         <message>
3622             <source>THRESHOLD_VALUE</source>
3623             <translation>Threshold value</translation>
3624         </message>
3625         <message>
3626             <source>UNARY</source>
3627             <translation>Unary</translation>
3628         </message>
3629         <message>
3630             <source>VOLUMES</source>
3631             <translation>Volumes</translation>
3632         </message>
3633         <message>
3634             <source>VOLUME_3D</source>
3635             <translation>Volume</translation>
3636         </message>
3637         <message>
3638             <source>WARPING</source>
3639             <translation>Warping</translation>
3640         </message>
3641     </context>
3642     <context>
3643         <name>SMESHGUI_GroupOpDlg</name>
3644         <message>
3645             <source>ARGUMENTS</source>
3646             <translation>Arguments</translation>
3647         </message>
3648         <message>
3649             <source>CUT_OF_TWO_GROUPS</source>
3650             <translation>Cut of two groups</translation>
3651         </message>
3652         <message>
3653             <source>DIFF_MESHES</source>
3654             <translation>Arguments of operation are not correctly specified
3655 Groups correspond to a different meshes
3656 Please specify valid arguments and try again</translation>
3657         </message>
3658         <message>
3659             <source>DIFF_TYPES</source>
3660             <translation>Arguments of operation are not correctly specified
3661 Groups contain elements of different types
3662 Please specify valid arguments and try again</translation>
3663         </message>
3664         <message>
3665             <source>EMPTY_NAME</source>
3666             <translation>Name of group to be created is not valid
3667 Please specify non-empty name and try again</translation>
3668         </message>
3669         <message>
3670             <source>INCORRECT_ARGUMENTS</source>
3671             <translation>Arguments of operation are not specified
3672 Please specify them and try again</translation>
3673         </message>
3674         <message>
3675             <source>INTERSECTION_OF_TWO_GROUPS</source>
3676             <translation>Intersection of two groups</translation>
3677         </message>
3678         <message>
3679             <source>MAIN_OBJECT</source>
3680             <translation>Main object</translation>
3681         </message>
3682         <message>
3683             <source>NAME</source>
3684             <translation>Name</translation>
3685         </message>
3686         <message>
3687             <source>OBJECT_1</source>
3688             <translation>Object 1</translation>
3689         </message>
3690         <message>
3691             <source>OBJECT_2</source>
3692             <translation>Object 2</translation>
3693         </message>
3694         <message>
3695             <source>RESULT_NAME</source>
3696             <translation>Result name</translation>
3697         </message>
3698         <message>
3699             <source>TOOL_OBJECT</source>
3700             <translation>Tool object</translation>
3701         </message>
3702         <message>
3703             <source>UNION_OF_TWO_GROUPS</source>
3704             <translation>Union of two groups</translation>
3705         </message>
3706     </context>
3707     <context>
3708         <name>SMESHGUI_MakeNodeAtPointDlg</name>
3709         <message>
3710             <source>AUTO_SEARCH</source>
3711             <translation>Automatic search</translation>
3712         </message>
3713         <message>
3714             <source>CAPTION</source>
3715             <translation>Mesh to pass through a point</translation>
3716         </message>
3717         <message>
3718             <source>CREATE_NEW_METHOD</source>
3719             <translation>Create a node</translation>
3720         </message>
3721         <message>
3722             <source>MESH_PASS_THROUGH_POINT</source>
3723             <translation>Make a node at point</translation>
3724         </message>
3725         <message>
3726             <source>METHOD</source>
3727             <translation>Method</translation>
3728         </message>
3729         <message>
3730             <source>MOVE_EXISTING_METHOD</source>
3731             <translation>Move a node</translation>
3732         </message>
3733         <message>
3734             <source>NODE_2MOVE</source>
3735             <translation>Node to move</translation>
3736         </message>
3737         <message>
3738             <source>NODE_2MOVE_ID</source>
3739             <translation>ID</translation>
3740         </message>
3741     </context>
3742     <context>
3743         <name>SMESHGUI_MakeNodeAtPointOp</name>
3744         <message>
3745             <source>INVALID_ID</source>
3746             <translation>Node ID is invalid</translation>
3747         </message>
3748         <message>
3749             <source>INVALID_MESH</source>
3750             <translation>Mesh to modify not selected</translation>
3751         </message>
3752     </context>
3753     <context>
3754         <name>SMESHGUI_MeshDlg</name>
3755         <message>
3756             <source>CREATE_MESH</source>
3757             <translation>Create mesh</translation>
3758         </message>
3759         <message>
3760             <source>CREATE_SUBMESH</source>
3761             <translation>Create sub-mesh</translation>
3762         </message>
3763         <message>
3764             <source>DIM_0D</source>
3765             <translation>0D</translation>
3766         </message>
3767         <message>
3768             <source>DIM_1D</source>
3769             <translation>1D</translation>
3770         </message>
3771         <message>
3772             <source>DIM_2D</source>
3773             <translation>2D</translation>
3774         </message>
3775         <message>
3776             <source>DIM_3D</source>
3777             <translation>3D</translation>
3778         </message>
3779         <message>
3780             <source>EDIT_MESH_SUBMESH</source>
3781             <translation>Edit mesh/sub-mesh</translation>
3782         </message>
3783         <message>
3784             <source>GEOMETRY</source>
3785             <translation>Geometry</translation>
3786         </message>
3787         <message>
3788             <source>HYPOTHESES_SETS</source>
3789             <translation>Assign a set of hypotheses</translation>
3790         </message>
3791         <message>
3792             <source>MESH</source>
3793             <translation>Mesh</translation>
3794         </message>
3795         <message>
3796             <source>NAME</source>
3797             <translation>Name</translation>
3798         </message>
3799     </context>
3800     <context>
3801         <name>SMESHGUI_MeshOp</name>
3802         <message>
3803             <source>ALGORITHM_WITHOUT_HYPOTHESIS</source>
3804             <translation>Algorithm is defined for %1 dimension but hypothesis is not defined</translation>
3805         </message>
3806         <message>
3807             <source>EDIT_SUBMESH_QUESTION</source>
3808             <translation>A submesh on the selected geometry already exists.
3809  Do you want to edit this submesh?</translation>
3810         </message>
3811         <message>
3812             <source>GEOMETRY_OBJECT_IS_NOT_DEFINED</source>
3813             <translation>Geometry object is not defined
3814 Please specify it and try again</translation>
3815         </message>
3816         <message>
3817             <source>GEOMETRY_OBJECT_IS_NULL</source>
3818             <translation>Geometry object is null</translation>
3819         </message>
3820         <message>
3821             <source>HYPOTHESES_AND_ALGORITHMS_ARE_NOT_DEFINED</source>
3822             <translation>Hypotheses and algorithms are not defined</translation>
3823         </message>
3824         <message>
3825             <source>HYPOTHESIS_WITHOUT_ALGORITHM</source>
3826             <translation>Hypothesis is defined for %1 dimension but algorithm is not defined</translation>
3827         </message>
3828         <message>
3829             <source>IMPORTED_MESH</source>
3830             <translation>Mesh is not built on geometry</translation>
3831         </message>
3832         <message>
3833             <source>INVALID_SUBSHAPE</source>
3834             <translation>Geometry object is not a subshape of the shape to mesh</translation>
3835         </message>
3836         <message>
3837             <source>MESH_IS_NOT_DEFINED</source>
3838             <translation>Mesh is not defined
3839 Please specify it and try again</translation>
3840         </message>
3841         <message>
3842             <source>MESH_IS_NULL</source>
3843             <translation>Mesh is null</translation>
3844         </message>
3845         <message>
3846             <source>NAME_OF_MESH_IS_EMPTY</source>
3847             <translation>Name of mesh is empty
3848 Please enter valid name and try again</translation>
3849         </message>
3850         <message>
3851             <source>NAME_OF_SUBMESH_IS_EMPTY</source>
3852             <translation>Name of submesh is empty
3853 Please enter valid name and try again</translation>
3854         </message>
3855         <message>
3856             <source>THERE_IS_NO_OBJECT_FOR_EDITING</source>
3857             <translation>There is no object for editing. Please
3858 select mesh or sub-mesh and try again</translation>
3859         </message>
3860     </context>
3861     <context>
3862         <name>SMESHGUI_MeshPatternDlg</name>
3863         <message>
3864             <source>3D_BLOCK</source>
3865             <translation>3D block</translation>
3866         </message>
3867         <message>
3868             <source>CAPTION</source>
3869             <translation>Pattern Mapping</translation>
3870         </message>
3871         <message>
3872             <source>CREATE_POLYEDRS_NEAR_BOUNDARY</source>
3873             <translation>Create polyhedrons near boundary</translation>
3874         </message>
3875         <message>
3876             <source>CREATE_POLYGONS_NEAR_BOUNDARY</source>
3877             <translation>Create polygons near boundary</translation>
3878         </message>
3879         <message>
3880             <source>ERROR_OF_LOADING</source>
3881             <translation>Loading of pattern from file failed. Probably file
3882 is corrupted or contains pattern of the other type</translation>
3883         </message>
3884         <message>
3885             <source>ERROR_OF_OPENING</source>
3886             <translation>It is impossible to open file. Please verify whether
3887 file exists and your permission to this file</translation>
3888         </message>
3889         <message>
3890             <source>ERROR_OF_READING</source>
3891             <translation>It is impossible to load pattern
3892 Please verify file's contents</translation>
3893         </message>
3894         <message>
3895             <source>ERR_READ_3D_COORD</source>
3896             <translation>It is impossible to load pattern
3897 Coordinates of 3D points out of [0,1] range</translation>
3898         </message>
3899         <message>
3900             <source>ERR_READ_BAD_INDEX</source>
3901             <translation>It is impossible to load pattern
3902 Invalid index of point detected</translation>
3903         </message>
3904         <message>
3905             <source>ERR_READ_BAD_KEY_POINT</source>
3906             <translation>It is impossible to load pattern
3907 Key-point not on a boundary</translation>
3908         </message>
3909         <message>
3910             <source>ERR_READ_ELEM_POINTS</source>
3911             <translation>It is impossible to load pattern
3912 invalid number of points in element</translation>
3913         </message>
3914         <message>
3915             <source>ERR_READ_NB_POINTS</source>
3916             <translation>It is impossible to load pattern
3917 It is impossible to read number of points from file</translation>
3918         </message>
3919         <message>
3920             <source>ERR_READ_NO_ELEMS</source>
3921             <translation>It is impossible to load pattern
3922 There are no elements in it</translation>
3923         </message>
3924         <message>
3925             <source>ERR_READ_NO_KEYPOINT</source>
3926             <translation>It is impossible to load pattern
3927 There are no key-points in 2D one</translation>
3928         </message>
3929         <message>
3930             <source>ERR_READ_POINT_COORDS</source>
3931             <translation>It is impossible to load pattern
3932 It is impossible to read point coordinates from file</translation>
3933         </message>
3934         <message>
3935             <source>ERR_READ_TOO_FEW_POINTS</source>
3936             <translation>It is impossible to load pattern. There are
3937  too few points in the file for pattern loading</translation>
3938         </message>
3939         <message>
3940             <source>FACE</source>
3941             <translation>Face</translation>
3942         </message>
3943         <message>
3944             <source>LOAD_PATTERN</source>
3945             <translation>Load pattern</translation>
3946         </message>
3947         <message>
3948             <source>MESH_FACES</source>
3949             <translation>Mesh faces</translation>
3950         </message>
3951         <message>
3952             <source>MESH_VOLUMES</source>
3953             <translation>Mesh volumes</translation>
3954         </message>
3955         <message>
3956             <source>NEW</source>
3957             <translation>New...</translation>
3958         </message>
3959         <message>
3960             <source>NODE_1</source>
3961             <translation>Node 1</translation>
3962         </message>
3963         <message>
3964             <source>NODE_2</source>
3965             <translation>Node 2</translation>
3966         </message>
3967         <message>
3968             <source>PATTERN</source>
3969             <translation>Pattern</translation>
3970         </message>
3971         <message>
3972             <source>PATTERN_FILT</source>
3973             <translation>Pattern files(*.smp)</translation>
3974         </message>
3975         <message>
3976             <source>PATTERN_TYPE</source>
3977             <translation>Pattern type</translation>
3978         </message>
3979         <message>
3980             <source>PREVIEW</source>
3981             <translation>Preview</translation>
3982         </message>
3983         <message>
3984             <source>REFINE</source>
3985             <translation>Refine selected mesh elements</translation>
3986         </message>
3987         <message>
3988             <source>REVERSE</source>
3989             <translation>Reverse order of key-points</translation>
3990         </message>
3991         <message>
3992             <source>VERTEX</source>
3993             <translation>Vertex   </translation>
3994         </message>
3995         <message>
3996             <source>VERTEX1</source>
3997             <translation>Vertex 1</translation>
3998         </message>
3999         <message>
4000             <source>VERTEX2</source>
4001             <translation>Vertex 2</translation>
4002         </message>
4003     </context>
4004     <context>
4005         <name>SMESHGUI_MeshTab</name>
4006         <message>
4007             <source>ADD_HYPOTHESIS</source>
4008             <translation>Add. Hypothesis</translation>
4009         </message>
4010         <message>
4011             <source>ALGORITHM</source>
4012             <translation>Algorithm</translation>
4013         </message>
4014         <message>
4015             <source>HYPOTHESIS</source>
4016             <translation>Hypothesis</translation>
4017         </message>
4018         <message>
4019             <source>NONE</source>
4020             <translation>&lt;None></translation>
4021         </message>
4022     </context>
4023     <context>
4024         <name>SMESHGUI_MoveNodesDlg</name>
4025         <message>
4026             <source>CAPTION</source>
4027             <translation>Move node</translation>
4028         </message>
4029         <message>
4030             <source>NODE_ID_IS_NOT_DEFINED</source>
4031             <translation>Node ID is not defined</translation>
4032         </message>
4033     </context>
4034     <context>
4035         <name>SMESHGUI_MultiEditDlg</name>
4036         <message>
4037             <source>ADD</source>
4038             <translation>Add</translation>
4039         </message>
4040         <message>
4041             <source>FILTER</source>
4042             <translation>Filter</translation>
4043         </message>
4044         <message>
4045             <source>REMOVE</source>
4046             <translation>Remove</translation>
4047         </message>
4048         <message>
4049             <source>SELECT_FROM</source>
4050             <translation>Select from</translation>
4051         </message>
4052         <message>
4053             <source>SORT_LIST</source>
4054             <translation>Sort list</translation>
4055         </message>
4056         <message>
4057             <source>SPLIT_JOIN_CRITERION</source>
4058             <translation>Criterion</translation>
4059         </message>
4060         <message>
4061             <source>TO_ALL</source>
4062             <translation>Apply to all</translation>
4063         </message>
4064         <message>
4065             <source>USE_DIAGONAL_1_3</source>
4066             <translation>Use diagonal 1-3</translation>
4067         </message>
4068         <message>
4069             <source>USE_DIAGONAL_2_4</source>
4070             <translation>Use diagonal 2-4</translation>
4071         </message>
4072         <message>
4073             <source>USE_NUMERIC_FUNC</source>
4074             <translation>Use numeric functor</translation>
4075         </message>
4076     </context>
4077     <context>
4078         <name>SMESHGUI_PrecisionDlg</name>
4079         <message>
4080             <source>CAPTION</source>
4081             <translation>Precision for mesh quality controls</translation>
4082         </message>
4083         <message>
4084             <source>NOT_USE</source>
4085             <translation>Do not use</translation>
4086         </message>
4087         <message>
4088             <source>PRECISION</source>
4089             <translation>Number of digits after point</translation>
4090         </message>
4091     </context>
4092     <context>
4093         <name>SMESHGUI_RevolutionDlg</name>
4094         <message>
4095             <source>ANGLE_BY_STEP</source>
4096             <translation>Use Angle by Step</translation>
4097         </message>
4098         <message>
4099             <source>PREVIEW</source>
4100             <translation>Preview</translation>
4101         </message>
4102         <message>
4103             <source>REVOLUTION_1D</source>
4104             <translation>Revolution of 1D elements</translation>
4105         </message>
4106         <message>
4107             <source>REVOLUTION_2D</source>
4108             <translation>Revolution of 2D elements</translation>
4109         </message>
4110         <message>
4111             <source>REVOLUTION_AROUND_AXIS</source>
4112             <translation>Revolution around an axis</translation>
4113         </message>
4114         <message>
4115             <source>TOTAL_ANGLE</source>
4116             <translation>Use Total Angle</translation>
4117         </message>
4118     </context>
4119     <context>
4120         <name>SMESHGUI_SewingDlg</name>
4121         <message>
4122             <source>BORDER</source>
4123             <translation>Border</translation>
4124         </message>
4125         <message>
4126             <source>BORDER_1</source>
4127             <translation>Border 1</translation>
4128         </message>
4129         <message>
4130             <source>BORDER_2</source>
4131             <translation>Border 2</translation>
4132         </message>
4133         <message>
4134             <source>CREATE_POLYEDRS_NEAR_BOUNDARY</source>
4135             <translation>Replace affected volumes by polyedres</translation>
4136         </message>
4137         <message>
4138             <source>CREATE_POLYGONS_INSTEAD_SPLITTING</source>
4139             <translation>Create polygons instead of splitting</translation>
4140         </message>
4141         <message>
4142             <source>ERROR_1</source>
4143             <translation>Free Border1 not found by the selected nodes</translation>
4144         </message>
4145         <message>
4146             <source>ERROR_2</source>
4147             <translation>Free Border2 not found by the selected nodes</translation>
4148         </message>
4149         <message>
4150             <source>ERROR_3</source>
4151             <translation>Free Border1 and Border2 not found by the selected nodes</translation>
4152         </message>
4153         <message>
4154             <source>ERROR_4</source>
4155             <translation>No path from the first side node to the last side node have been found</translation>
4156         </message>
4157         <message>
4158             <source>ERROR_5</source>
4159             <translation>Not allowed to splite volumes on the side!</translation>
4160         </message>
4161         <message>
4162             <source>ERROR_6</source>
4163             <translation>Different number of elements selected on the sides</translation>
4164         </message>
4165         <message>
4166             <source>ERROR_7</source>
4167             <translation>Element sets are topologically different or given nodes are inconvenient</translation>
4168         </message>
4169         <message>
4170             <source>ERROR_8</source>
4171             <translation>Nodes on the side 1 are either not linked or not laying on the element set boundary</translation>
4172         </message>
4173         <message>
4174             <source>ERROR_9</source>
4175             <translation>Nodes on the side 2 are either not linked or not laying on the element set boundary</translation>
4176         </message>
4177         <message>
4178             <source>FIRST_NODE_ID</source>
4179             <translation>First Node ID</translation>
4180         </message>
4181         <message>
4182             <source>LAST_NODE_ID</source>
4183             <translation>Last Node ID</translation>
4184         </message>
4185         <message>
4186             <source>MERGE_EQUAL_ELEMENTS</source>
4187             <translation>Merge equal elements</translation>
4188         </message>
4189         <message>
4190             <source>NODE1_TO_MERGE</source>
4191             <translation>Node 1 To Merge</translation>
4192         </message>
4193         <message>
4194             <source>NODE2_TO_MERGE</source>
4195             <translation>Node 2 To Merge</translation>
4196         </message>
4197         <message>
4198             <source>SECOND_NODE_ID</source>
4199             <translation>Second Node ID</translation>
4200         </message>
4201         <message>
4202             <source>SEW_BORDER_TO_SIDE</source>
4203             <translation>Sew Border To Side</translation>
4204         </message>
4205         <message>
4206             <source>SEW_CONFORM_FREE_BORDERS</source>
4207             <translation>Sew Conform Free Borders</translation>
4208         </message>
4209         <message>
4210             <source>SEW_FREE_BORDERS</source>
4211             <translation>Sew Free Borders</translation>
4212         </message>
4213         <message>
4214             <source>SEW_SIDE_ELEMENTS</source>
4215             <translation>Sew Side Elements</translation>
4216         </message>
4217         <message>
4218             <source>SIDE</source>
4219             <translation>Side</translation>
4220         </message>
4221         <message>
4222             <source>SIDE_1</source>
4223             <translation>Side 1</translation>
4224         </message>
4225         <message>
4226             <source>SIDE_2</source>
4227             <translation>Side 2</translation>
4228         </message>
4229     </context>
4230     <context>
4231         <name>SMESHGUI_ShapeByMeshDlg</name>
4232         <message>
4233             <source>CAPTION</source>
4234             <translation>Find geometry by mesh element</translation>
4235         </message>
4236     </context>
4237     <context>
4238         <name>SMESHGUI_SingleEditDlg</name>
4239         <message>
4240             <source>EDGE_BETWEEN</source>
4241             <translation>Edge between neighboring triangles</translation>
4242         </message>
4243     </context>
4244     <context>
4245         <name>SMESHGUI_SmoothingDlg</name>
4246         <message>
4247             <source>CENTROIDAL</source>
4248             <translation>Centroidal</translation>
4249         </message>
4250         <message>
4251             <source>FIXED_NODES_IDS</source>
4252             <translation>Fixed nodes ids</translation>
4253         </message>
4254         <message>
4255             <source>IS_PARAMETRIC</source>
4256             <translation>in parametric space</translation>
4257         </message>
4258         <message>
4259             <source>ITERATION_LIMIT</source>
4260             <translation>Iteration limit</translation>
4261         </message>
4262         <message>
4263             <source>LAPLACIAN</source>
4264             <translation>Laplacian</translation>
4265         </message>
4266         <message>
4267             <source>MAX_ASPECT_RATIO</source>
4268             <translation>Max. aspect ratio</translation>
4269         </message>
4270         <message>
4271             <source>METHOD</source>
4272             <translation>Method</translation>
4273         </message>
4274     </context>
4275     <context>
4276         <name>SMESHGUI_TrianglesInversionDlg</name>
4277         <message>
4278             <source>CAPTION</source>
4279             <translation>Diagonal inversion</translation>
4280         </message>
4281     </context>
4282     <context>
4283         <name>SMESHGUI_UnionOfTrianglesDlg</name>
4284         <message>
4285             <source>CAPTION</source>
4286             <translation>Union of triangles</translation>
4287         </message>
4288         <message>
4289             <source>MAXIMUM_ANGLE</source>
4290             <translation>Maximum bending angle</translation>
4291         </message>
4292     </context>
4293     <context>
4294         <name>SMESHGUI_UnionOfTwoTrianglesDlg</name>
4295         <message>
4296             <source>CAPTION</source>
4297             <translation>Union of two triangles</translation>
4298         </message>
4299     </context>
4300     <context>
4301         <name>SMESHGUI_WhatIsDlg</name>
4302         <message>
4303             <source>ENTITY_TYPE</source>
4304             <translation>Element type</translation>
4305         </message>
4306         <message>
4307             <source>GRAVITY_CENTER</source>
4308             <translation>Gravity center</translation>
4309         </message>
4310     </context>
4311 </TS>