]> SALOME platform Git repositories - modules/smesh.git/log
Salome HOME
modules/smesh.git
8 years agoMerge remote branch 'origin/V7_dev' into V8_0_0_BR V8_0_0rc1
vsr [Fri, 5 Feb 2016 14:25:24 +0000 (17:25 +0300)]
Merge remote branch 'origin/V7_dev' into V8_0_0_BR

8 years ago53061: "Clear mesh data" removes too many (if !HasShapeToMesh())
eap [Fri, 5 Feb 2016 13:51:01 +0000 (16:51 +0300)]
53061: "Clear mesh data" removes too many (if !HasShapeToMesh())

8 years agoMerge remote branch 'origin/V7_dev' into V8_0_0_BR
vsr [Thu, 4 Feb 2016 09:24:52 +0000 (12:24 +0300)]
Merge remote branch 'origin/V7_dev' into V8_0_0_BR

8 years ago0023224: [CEA 1709] Error with numpy with Windows version of SALOME
vsr [Thu, 4 Feb 2016 09:22:57 +0000 (12:22 +0300)]
0023224: [CEA 1709] Error with numpy with Windows version of SALOME

Each mesh plug-in is added in a separate try/except block, to prevent blocking of plug-ins due to error in some of them (e.g. if import failed)

8 years agoMerge remote branch 'origin/V7_dev' into V8_0_0_BR
vsr [Wed, 3 Feb 2016 14:09:39 +0000 (17:09 +0300)]
Merge remote branch 'origin/V7_dev' into V8_0_0_BR

8 years agoEnable splitting bi-quad quadrangles by QuadToTri()
eap [Wed, 3 Feb 2016 11:43:37 +0000 (14:43 +0300)]
Enable splitting bi-quad quadrangles by QuadToTri()

8 years agoFix regressions in QuadTo4Tri() and QuadToTri()
eap [Tue, 2 Feb 2016 18:10:57 +0000 (21:10 +0300)]
Fix regressions in QuadTo4Tri() and QuadToTri()

mesh_Quadratic_00/A3
imps_09/K8

8 years agoRegression of 3D_mesh_Extrusion_00/B2
eap [Tue, 2 Feb 2016 17:38:56 +0000 (20:38 +0300)]
Regression of 3D_mesh_Extrusion_00/B2

 + avoid failure because of different 'vertical' discretization

8 years agoMerge remote branch 'origin/V7_dev' into V8_0_0_BR
vsr [Tue, 2 Feb 2016 16:11:22 +0000 (19:11 +0300)]
Merge remote branch 'origin/V7_dev' into V8_0_0_BR

8 years ago23221: EDF - all edges are not meshed
eap [Fri, 29 Jan 2016 15:03:18 +0000 (18:03 +0300)]
23221: EDF - all edges are not meshed

 an internal EDGE in a SOLID to be meshed

8 years agoAvoid MED file reading failure caused by low memory
eap [Fri, 29 Jan 2016 12:47:48 +0000 (15:47 +0300)]
Avoid MED file reading failure caused by low memory

 Failure reason: system(...) command exits with "Cannot allocate memory"

8 years agoPyQt4/PyQt5 support. rnv/pyqt4_pyqt5_plugins
rnv [Thu, 28 Jan 2016 14:40:22 +0000 (17:40 +0300)]
PyQt4/PyQt5 support.

8 years ago53076: OCC exception in Netgen algorithm (regression of StdMeshers_QuadToTriaAdaptor...
eap [Mon, 25 Jan 2016 18:06:20 +0000 (21:06 +0300)]
53076: OCC exception in Netgen algorithm (regression of StdMeshers_QuadToTriaAdaptor.cxx)

8 years agoMerge branch 'V7_dev' into V8_0_0_BR
vsr [Mon, 25 Jan 2016 13:32:07 +0000 (16:32 +0300)]
Merge branch 'V7_dev' into V8_0_0_BR

8 years agoIncrement version: 8.0.0
vsr [Mon, 25 Jan 2016 12:50:47 +0000 (15:50 +0300)]
Increment version: 8.0.0

8 years ago53075: Create mesh dialog: 3D tab disabled
eap [Mon, 25 Jan 2016 12:42:49 +0000 (15:42 +0300)]
53075: Create mesh dialog: 3D tab disabled

8 years agoOCCT Exception in "Cutting of quadrangles" dialog
eap [Fri, 22 Jan 2016 17:29:39 +0000 (20:29 +0300)]
OCCT Exception in "Cutting of quadrangles" dialog

8 years agoIPAL53073: Hexotic Mesh is not compute
eap [Fri, 22 Jan 2016 17:10:27 +0000 (20:10 +0300)]
IPAL53073: Hexotic Mesh is not compute

8 years agoINT PAL 0053067: Algorithm disable in "Edit mesh" dialog
imn [Wed, 20 Jan 2016 14:33:43 +0000 (17:33 +0300)]
INT PAL 0053067: Algorithm disable in "Edit mesh" dialog

8 years ago0023212: EDF 12054 - Problem with a pyramidal layer
eap [Wed, 20 Jan 2016 13:02:17 +0000 (16:02 +0300)]
0023212: EDF 12054 - Problem with a pyramidal layer

8 years agoINT PAL 0053060: Preview in clipping
mpa [Mon, 18 Jan 2016 13:55:45 +0000 (16:55 +0300)]
INT PAL 0053060: Preview in clipping

8 years agoMerge branch 'V8_0_BR' V8_0_0a2 V8_0_0b1
vsr [Fri, 15 Jan 2016 06:21:25 +0000 (09:21 +0300)]
Merge branch 'V8_0_BR'

8 years ago0023198: EDF 8842 - Management of additional hypothesis V7_8_0a1
imn [Thu, 14 Jan 2016 08:14:55 +0000 (11:14 +0300)]
0023198: EDF 8842 - Management of additional hypothesis

8 years agoFix possible problem with enclosed reloading of targets from SALOME modules V8_0_BR
vsr [Wed, 13 Jan 2016 14:15:11 +0000 (17:15 +0300)]
Fix possible problem with enclosed reloading of targets from SALOME modules

8 years agoFix compilation errors using gcc-5.X relating to explicit stream::operator bool()
eap [Wed, 13 Jan 2016 13:47:35 +0000 (16:47 +0300)]
Fix compilation errors using gcc-5.X relating to explicit stream::operator bool()

+ Fix compilation warnings

8 years agoReadme cas tests bloc fissure
Paul RASCLE [Tue, 12 Jan 2016 16:40:50 +0000 (17:40 +0100)]
Readme cas tests bloc fissure

8 years agocorrection cas test cubeMilieu (indice edge fond)
Paul RASCLE [Tue, 12 Jan 2016 16:21:43 +0000 (17:21 +0100)]
correction cas test cubeMilieu (indice edge fond)

8 years agocorrection cas test vis: face de fissure trop débordante. Un probleme de GetInPlace...
Paul RASCLE [Tue, 12 Jan 2016 16:02:55 +0000 (17:02 +0100)]
correction cas test vis: face de fissure trop débordante. Un probleme de GetInPlace sur ce cas

8 years agodebug de GetInPlace pour Cas 7 eprouvette courbe non résolu
Paul RASCLE [Tue, 12 Jan 2016 14:00:56 +0000 (15:00 +0100)]
debug de GetInPlace pour Cas 7 eprouvette courbe non résolu

8 years agocorrection des scripts de materiel pour les cas tests bloc fissure
Paul RASCLE [Mon, 11 Jan 2016 17:11:57 +0000 (18:11 +0100)]
correction des scripts de materiel pour les cas tests bloc fissure

8 years agodebug bloc fissure after merge master
Paul RASCLE [Mon, 11 Jan 2016 10:44:48 +0000 (11:44 +0100)]
debug bloc fissure after merge master

8 years agomerge master
Paul RASCLE [Thu, 7 Jan 2016 17:15:04 +0000 (18:15 +0100)]
merge master

8 years agoIPAL53054: Hexahedron(ijk) fails with SIGSEGV
eap [Wed, 30 Dec 2015 16:55:01 +0000 (19:55 +0300)]
IPAL53054: Hexahedron(ijk) fails with SIGSEGV

8 years agoMerge Qt5 porting. V8_0_0a1
imn [Thu, 26 Nov 2015 14:36:23 +0000 (17:36 +0300)]
Merge Qt5 porting.

8 years agoINT PAL 0052968: 'Mesh Information' dialog shows incorrect color of group built from...
mpa [Wed, 23 Dec 2015 11:00:59 +0000 (14:00 +0300)]
INT PAL 0052968: 'Mesh Information' dialog shows incorrect color of group built from geometry. (added a new form for defining color)

8 years agoPorting PV50
Anthony Geay [Thu, 17 Dec 2015 14:38:56 +0000 (15:38 +0100)]
Porting PV50

8 years agoINT PAL 52986: Previously selected 'Scale distribution' type is not selected at edit...
mpa [Thu, 17 Dec 2015 07:53:53 +0000 (10:53 +0300)]
INT PAL 52986: Previously selected 'Scale distribution' type is not selected at edit of 'Nb. Segments' hypothesis

8 years agoINT PAL 53009: 'Remove row' removes 1st row always.
mpa [Wed, 9 Dec 2015 07:33:24 +0000 (10:33 +0300)]
INT PAL 53009: 'Remove row' removes 1st row always.

8 years agoVariables for MGCleaner/Yams are already set in the Salome environment
ctn [Wed, 28 Oct 2015 12:38:46 +0000 (13:38 +0100)]
Variables for MGCleaner/Yams are already set in the Salome environment

8 years agoAdd missing import SMESH
vsr [Wed, 2 Dec 2015 09:42:04 +0000 (12:42 +0300)]
Add missing import SMESH

8 years ago52981: Dump python on MESH module does't work
eap [Tue, 1 Dec 2015 13:28:08 +0000 (16:28 +0300)]
52981: Dump python on MESH module does't work

8 years agoFix regression of non-regression tests
eap [Tue, 1 Dec 2015 11:32:09 +0000 (14:32 +0300)]
Fix regression of non-regression tests

- Coplanar faces filter (SMESH_Controls.cxx)
- Convert to quadratic (SMESH_MesherHelper.cxx)
- Missing Compute item in mesh pop-up in presence of a sub-mesh on compound only (no other algos) (SSMESHGUI_ComputeDlg.cxx)
- set checkAll=False in call of SMESH_Gen::IsApplicable() (smeshBuilder.py)

8 years agoINT PAL 0052968: 'Mesh Information' dialog shows incorrect color of group built from...
mpa [Mon, 30 Nov 2015 10:31:21 +0000 (13:31 +0300)]
INT PAL 0052968: 'Mesh Information' dialog shows incorrect color of group built from geometry (edited)

8 years agoOne more compilation error on Mageia 5
vsr [Fri, 27 Nov 2015 10:13:27 +0000 (13:13 +0300)]
One more compilation error on Mageia 5

8 years agoAnother compilation error on Mageia 5
vsr [Fri, 27 Nov 2015 09:22:06 +0000 (12:22 +0300)]
Another compilation error on Mageia 5

8 years agoCompilation error on Mageia 5
eap [Wed, 25 Nov 2015 10:53:04 +0000 (13:53 +0300)]
Compilation error on Mageia 5
   (DriverMED_W_SMESHDS_Mesh.cxx)

+ small changes for 23190: EDF 11636 - Problem of viscous layer
   (not yet fixed)

8 years agoIPAL52980: Wire Discretization with Table density fails
eap [Thu, 19 Nov 2015 11:29:23 +0000 (14:29 +0300)]
IPAL52980: Wire Discretization with Table density fails
  (StdMeshers_Regular_1D.cxx)

+ Compilation warnings

+ WIN specific errors
   (StdMeshers_Adaptive1D.cxx)

8 years agoINT PAL 0052968: 'Mesh Information' dialog shows incorrect color of group built from...
mpa [Tue, 17 Nov 2015 14:37:11 +0000 (17:37 +0300)]
INT PAL 0052968: 'Mesh Information' dialog shows incorrect color of group built from geometry.

8 years agoIPAL52943: "Apply and Close" button does not active on symmetry dialog box
eap [Thu, 12 Nov 2015 11:46:55 +0000 (14:46 +0300)]
IPAL52943: "Apply and Close" button does not active on symmetry dialog box

   Enable work with not shown meshes

8 years ago52943: "Apply and Close" button does not active on symmetry dialog box
eap [Wed, 11 Nov 2015 13:13:01 +0000 (16:13 +0300)]
52943: "Apply and Close" button does not active on symmetry dialog box

  Fix same pb in all similar dlg

8 years ago52941: Remove selected group does't work in sewing operation
eap [Tue, 10 Nov 2015 11:17:25 +0000 (14:17 +0300)]
52941: Remove selected group does't work in sewing operation

9 years agoRun tests on Windows platform.
mkr [Mon, 17 Aug 2015 09:12:33 +0000 (12:12 +0300)]
Run tests on Windows platform.

9 years agoIPAL52939: SIGSEGV when Compute a mesh with closed VTK Viewer V8_0_pre
eap [Thu, 29 Oct 2015 16:27:29 +0000 (19:27 +0300)]
IPAL52939: SIGSEGV when Compute a mesh with closed VTK Viewer

9 years agoIPAL10786: "Edit" is unnecessary functionality for some Mesh hypotheses
eap [Thu, 29 Oct 2015 16:18:36 +0000 (19:18 +0300)]
IPAL10786: "Edit" is unnecessary functionality for some Mesh hypotheses

+ Eliminate compilation warnings

9 years agoDocumentation update
ysn [Mon, 19 Oct 2015 08:10:14 +0000 (11:10 +0300)]
Documentation update

9 years agoEnable C++0x/C++11 support
vsr [Fri, 16 Oct 2015 10:46:33 +0000 (14:46 +0400)]
Enable C++0x/C++11 support

9 years agoIPAL52927: SIGSEGV at build compound of sub-meshes.
eap [Wed, 28 Oct 2015 16:16:42 +0000 (19:16 +0300)]
IPAL52927: SIGSEGV at build compound of sub-meshes.

9 years agoIPAL52871: Mesh Information dialog shows different number of nodes for group of elements
eap [Wed, 28 Oct 2015 16:15:20 +0000 (19:15 +0300)]
IPAL52871: Mesh Information dialog shows different number of nodes for group of elements
   Implement final solution (note 0506775)

9 years agoIPAL52934: Elements are't not highlighted in vtk viewer after set id in measurements...
eap [Wed, 28 Oct 2015 16:11:56 +0000 (19:11 +0300)]
IPAL52934: Elements are't not highlighted in vtk viewer after set id in measurements dialog box
  Fix SMESHGUI_Measurements.cxx

In "Build Compound Mesh", set "Merge coincident nodes and elements" ON by default
after reflection about a question on the Forum http://www.salome-platform.org/forum/forum_11/866636535
  Change SMESHGUI_BuildCompoundDlg.cxx

9 years agoIPAL52933: Selection disappears in the "Move node" dialog
eap [Wed, 28 Oct 2015 16:04:54 +0000 (19:04 +0300)]
IPAL52933: Selection disappears in the "Move node" dialog
   Fix SMESHGUI_MakeNodeAtPointDlg.cxx

Eliminate compilation warnings from SMESHGUI.cxx

9 years ago23189: EDF 11603 - Dyssymetry in meshing
eap [Tue, 27 Oct 2015 18:21:05 +0000 (21:21 +0300)]
23189: EDF 11603 - Dyssymetry in meshing
  (fix StdMeshers_CompositeHexa_3D.cxx, StdMeshers_Hexa_3D.cxx)

+ Doc update
+ Optimize dump of NumberOfSegments

9 years agoIPAL52924: Edit Group Standalone: Filters with Source: Mesh, Initial selection does...
eap [Tue, 27 Oct 2015 17:57:08 +0000 (20:57 +0300)]
IPAL52924: Edit Group Standalone: Filters with Source: Mesh, Initial selection does not work

+ Enable "New Mesh" option in Create Boundary Elements dialog independently of type of selected object
    (SMESHGUI_Make2DFrom3DOp.cxx)

9 years agoIPAL52935: "Apply and Close" button is not available in "Make 0D Elements on Element...
eap [Tue, 27 Oct 2015 17:47:31 +0000 (20:47 +0300)]
IPAL52935: "Apply and Close" button is not available in "Make 0D Elements on Element Nodes" dialog box
   (SMESHGUI_Add0DElemsOnAllNodesDlg.cxx)

Eliminate compilation warnings (all the rest files)

9 years agoSet development flag to 1
vsr [Mon, 19 Oct 2015 08:25:16 +0000 (11:25 +0300)]
Set development flag to 1

9 years agoIncrement version: 7.7.0 fix_for_770 V7_7_0 V7_7_0_WIN V7_7_0rc1
vsr [Thu, 15 Oct 2015 05:57:03 +0000 (08:57 +0300)]
Increment version: 7.7.0

9 years agoFix compilation error on Linux caused by previous commit
vsr [Wed, 14 Oct 2015 14:53:01 +0000 (17:53 +0300)]
Fix compilation error on Linux caused by previous commit

9 years agoWindows compatibility
ana [Wed, 14 Oct 2015 13:38:35 +0000 (16:38 +0300)]
Windows compatibility

9 years ago23179: EDF 11603 - Problem with extrusion when path is not well oriented
eap [Fri, 9 Oct 2015 14:47:17 +0000 (17:47 +0300)]
23179: EDF 11603 - Problem with extrusion when path is not well oriented
HYDRO module: Feature #523: river, channel, embankment meshing

9 years agoINT PAL 52920: TC7.7.0: Button is to small for its label
vsr [Fri, 9 Oct 2015 12:54:46 +0000 (15:54 +0300)]
INT PAL 52920: TC7.7.0: Button is to small for its label

9 years agoFix for the '22047: Automatic Tetrahedralization - field Length is shown not from...
rnv [Thu, 8 Oct 2015 15:07:19 +0000 (18:07 +0300)]
Fix for the '22047: Automatic Tetrahedralization - field Length is shown not from beginning of the number' issue.

9 years agoIPAL52860: Free Edges control mis-location and mis-visibility
eap [Thu, 8 Oct 2015 14:32:17 +0000 (17:32 +0300)]
IPAL52860: Free Edges control mis-location and mis-visibility

9 years agoIPAL52916: TC7.7.0:Triangle in "Threshold value" is missing after applying filter...
eap [Thu, 8 Oct 2015 14:25:45 +0000 (17:25 +0300)]
IPAL52916: TC7.7.0:Triangle in "Threshold value" is missing after applying filter with criterion "Geometry type"

9 years agoIPAL52915: TC7.7.0:Preview is disappears in OB
eap [Thu, 8 Oct 2015 14:23:39 +0000 (17:23 +0300)]
IPAL52915: TC7.7.0:Preview is disappears in OB

9 years agoFrench translations and minor fixes in the english version.
Florian BRUNET [Tue, 6 Oct 2015 16:22:10 +0000 (18:22 +0200)]
French translations and minor fixes in the english version.

9 years ago23179: EDF 11603 - Problem with extrusion when path is not well oriented
eap [Wed, 7 Oct 2015 15:06:26 +0000 (18:06 +0300)]
23179: EDF 11603 - Problem with extrusion when path is not well oriented
IPAL52909: TC7.7.0: edges selection provides incorrect nodes IDs
IPAL52895: TC7.7.0: Incorrect behaviour of the "Move Node" dialog.
IPAL52910: TC7.7.0: mesh is not updated at Apply click in Smoothing dialog

9 years agoIPAL52868: Confusing error message when computing an imported mesh w/o algo assigned
eap [Mon, 5 Oct 2015 11:51:57 +0000 (14:51 +0300)]
IPAL52868: Confusing error message when computing an imported mesh w/o algo assigned
IPAL52888: Pattern Mapping fails to load from a face just after study loading

9 years agoUpdate translation files from Crowdin
Christophe Bourcier [Mon, 28 Sep 2015 12:37:06 +0000 (14:37 +0200)]
Update translation files from Crowdin

9 years ago23173: EDF 11552 - Problem using Add 0D element function
eap [Tue, 29 Sep 2015 16:25:32 +0000 (19:25 +0300)]
23173: EDF 11552 - Problem using Add 0D element function
IPAL52875: Extrusion along a path: the buttons are not active if the path is closed
IPAL52882: Hexahedron (i,j,k) makes a wrong mesh on a block with composite sides

9 years ago23156: EDF 9626 SMESH: Dump study produces a non-working script
eap [Fri, 25 Sep 2015 18:15:51 +0000 (21:15 +0300)]
23156: EDF 9626 SMESH: Dump study produces a non-working script
52874: List of available groups in 'Group' combo-box is empty for sub-mesh and group.
52871: Mesh Information dialog shows different number of nodes for group of elements
Regression of Grids/smesh/sewing_00/A5

9 years agoFix misprint
akl [Fri, 25 Sep 2015 08:44:59 +0000 (12:44 +0400)]
Fix misprint

9 years ago23081: [CEA 1496] Control merge nodes behaviour: set fixed nodes
eap [Thu, 24 Sep 2015 16:17:33 +0000 (19:17 +0300)]
23081: [CEA 1496] Control merge nodes behaviour: set fixed nodes

Change dlg layout by request of http://salome.mantis.opencascade.com/view.php?id=23081#c20415

9 years agoINT PAL 0052873: IDs are not updated
imn [Wed, 23 Sep 2015 15:14:03 +0000 (18:14 +0300)]
INT PAL 0052873: IDs are not updated

9 years agoDebug 23078: [CEA 1498] Sewing of meshes without having to set the nodes ids
eap [Wed, 23 Sep 2015 14:47:26 +0000 (17:47 +0300)]
Debug 23078: [CEA 1498] Sewing of meshes without having to set the nodes ids

9 years agoAdd naming of fields in Mesh Informaion dialog.
akl [Wed, 23 Sep 2015 09:28:37 +0000 (13:28 +0400)]
Add naming of fields in Mesh Informaion dialog.

9 years agoIMP 23078: [CEA 1498] Sewing of meshes without having to set the nodes ids V7_7_0b1
eap [Fri, 18 Sep 2015 14:10:34 +0000 (17:10 +0300)]
IMP 23078: [CEA 1498] Sewing of meshes without having to set the nodes ids

9 years agoINT PAL 0013201: Error during edit mesh
imn [Wed, 16 Sep 2015 09:34:16 +0000 (12:34 +0300)]
INT PAL 0013201: Error during edit mesh

9 years agoINT PAL 0052858: VTK viewer is not updated at 'Controls - Reset' call
mpa [Mon, 14 Sep 2015 09:51:08 +0000 (12:51 +0300)]
INT PAL 0052858: VTK viewer is not updated at 'Controls - Reset' call

9 years agoIPAL52867: Crash at attempt to create group by 'Color of Group' filter
eap [Thu, 10 Sep 2015 17:50:31 +0000 (20:50 +0300)]
IPAL52867: Crash at attempt to create group by 'Color of Group' filter

9 years ago52863: Convert To Bi-Quadratic incorrectly locate in-face central nodes
eap [Tue, 8 Sep 2015 14:24:05 +0000 (17:24 +0300)]
52863: Convert To Bi-Quadratic incorrectly locate in-face central nodes
52865: Wrong order of children under a sub-mesh in the Object Browser

9 years agoINT PAL 0052864: Assigned algorithms are not shown in Edit Mesh dialog
imn [Mon, 7 Sep 2015 13:12:52 +0000 (16:12 +0300)]
INT PAL 0052864: Assigned algorithms are not shown in Edit Mesh dialog

9 years agoIPAL52650: Convert to quadratic fails on an ellipsoid. V7_7_0a1
eap [Fri, 4 Sep 2015 17:35:06 +0000 (20:35 +0300)]
IPAL52650: Convert to quadratic fails on an ellipsoid.
IPAL52659: Pattern file is not readable
IPAL18558: Wrong information of the created sub-mesh is shown.

9 years agoIPAL52860: Free Edges control mis-location and mis-visibility
eap [Fri, 4 Sep 2015 13:55:55 +0000 (16:55 +0300)]
IPAL52860: Free Edges control mis-location and mis-visibility
IPAL19098: Confusing "Precision" of "Average Length" implemented for NPAL17873

9 years agoFix "Assign a set of hypotheses" on available hypotheses in create mesh dialog box
imn [Fri, 4 Sep 2015 12:03:02 +0000 (15:03 +0300)]
Fix "Assign a set of hypotheses" on available hypotheses in create mesh dialog box

9 years ago23151: EDF 9626 SMESH: Opening an existing study makes salome end with an allocation...
eap [Wed, 2 Sep 2015 14:39:00 +0000 (17:39 +0300)]
23151: EDF 9626 SMESH: Opening an existing study makes salome end with an allocation error when closing.
  Fix ~SMESH_Gen_i()

Regression 2D_mesh_Polygons_00/A2
  Fix DriverSTL_W_SMDS_Mesh.cxx

IPAL52658: Quadrangle (Mapping) makes invalid mesh with Enforced vertices
IPAL52654: Quadrangle (Mapping) with enforced vertices works wrong
IPAL20729: Difference in behaviour of selection for Rotation against Translation, Symmetry after Apply.
IPAL9947: SMESH – Merge nodes dialog box

9 years agoFixed filtering in create mesh dialog box
imn [Wed, 2 Sep 2015 10:13:46 +0000 (13:13 +0300)]
Fixed filtering in create mesh dialog box

9 years agoIPAL52781: Orientation of a wall face created by revolution is wrong
eap [Fri, 28 Aug 2015 17:03:25 +0000 (20:03 +0300)]
IPAL52781: Orientation of a wall face created by revolution is wrong
IPAL52850: ConvertToQuadratic creates invalid triangles
Regression of imps_09/K0

9 years agoBugfix: removal of an unecessary job duration parameter in padder.
Florian BRUNET [Fri, 28 Aug 2015 07:11:07 +0000 (09:11 +0200)]
Bugfix: removal of an unecessary job duration parameter in padder.

9 years ago23142: EDF 11419 SMESH: Details about extrusion methods
eap [Tue, 25 Aug 2015 17:15:49 +0000 (20:15 +0300)]
23142: EDF 11419 SMESH: Details about extrusion methods

Debug of [HYDRO module - Feature #523] river, channel, embankment meshing

+ Wrong meshing progress if an algo calls SMESH_Gen::Compute()

9 years ago23138: EDF SMESH Regression: New behavior with ExtrusionSweepObject
eap [Thu, 20 Aug 2015 16:23:10 +0000 (19:23 +0300)]
23138: EDF SMESH Regression: New behavior with ExtrusionSweepObject
IPAL52830: "Mesh computation fails" and "Evaluate" dialogs do not have [Help] button
IPAL52782: Invalid polygon after merge

9 years ago52846: It is impossible to select edge in OB as reversed edge for hypothesis
eap [Wed, 19 Aug 2015 14:32:58 +0000 (17:32 +0300)]
52846: It is impossible to select edge in OB as reversed edge for hypothesis
52826: Radial Quadrangle algorithm meshes a quad face from which a circle was cut from but it must fail
52227: Group is not shown during edition
52780: Wrong mesh after STL re-import of a polygonal element
52825: Sew Borders does not care of segment adjacent to split faces, thus segments become non-conformal
52824: Sew Free Borders sews borders as conformal thus producing very skewed quads instead of polygons