Salome HOME
modules/smesh.git
4 years agoIPAL52939: SIGSEGV when Compute a mesh with closed VTK Viewer V8_0_pre
eap [Thu, 29 Oct 2015 16:27:29 +0000 (19:27 +0300)]
IPAL52939: SIGSEGV when Compute a mesh with closed VTK Viewer

4 years agoIPAL10786: "Edit" is unnecessary functionality for some Mesh hypotheses
eap [Thu, 29 Oct 2015 16:18:36 +0000 (19:18 +0300)]
IPAL10786: "Edit" is unnecessary functionality for some Mesh hypotheses

+ Eliminate compilation warnings

4 years agoDocumentation update
ysn [Mon, 19 Oct 2015 08:10:14 +0000 (11:10 +0300)]
Documentation update

4 years agoEnable C++0x/C++11 support
vsr [Fri, 16 Oct 2015 10:46:33 +0000 (14:46 +0400)]
Enable C++0x/C++11 support

4 years agoIPAL52927: SIGSEGV at build compound of sub-meshes.
eap [Wed, 28 Oct 2015 16:16:42 +0000 (19:16 +0300)]
IPAL52927: SIGSEGV at build compound of sub-meshes.

4 years agoIPAL52871: Mesh Information dialog shows different number of nodes for group of elements
eap [Wed, 28 Oct 2015 16:15:20 +0000 (19:15 +0300)]
IPAL52871: Mesh Information dialog shows different number of nodes for group of elements
   Implement final solution (note 0506775)

4 years agoIPAL52934: Elements are't not highlighted in vtk viewer after set id in measurements...
eap [Wed, 28 Oct 2015 16:11:56 +0000 (19:11 +0300)]
IPAL52934: Elements are't not highlighted in vtk viewer after set id in measurements dialog box
  Fix SMESHGUI_Measurements.cxx

In "Build Compound Mesh", set "Merge coincident nodes and elements" ON by default
after reflection about a question on the Forum http://www.salome-platform.org/forum/forum_11/866636535
  Change SMESHGUI_BuildCompoundDlg.cxx

4 years agoIPAL52933: Selection disappears in the "Move node" dialog
eap [Wed, 28 Oct 2015 16:04:54 +0000 (19:04 +0300)]
IPAL52933: Selection disappears in the "Move node" dialog
   Fix SMESHGUI_MakeNodeAtPointDlg.cxx

Eliminate compilation warnings from SMESHGUI.cxx

4 years ago23189: EDF 11603 - Dyssymetry in meshing
eap [Tue, 27 Oct 2015 18:21:05 +0000 (21:21 +0300)]
23189: EDF 11603 - Dyssymetry in meshing
  (fix StdMeshers_CompositeHexa_3D.cxx, StdMeshers_Hexa_3D.cxx)

+ Doc update
+ Optimize dump of NumberOfSegments

4 years agoIPAL52924: Edit Group Standalone: Filters with Source: Mesh, Initial selection does...
eap [Tue, 27 Oct 2015 17:57:08 +0000 (20:57 +0300)]
IPAL52924: Edit Group Standalone: Filters with Source: Mesh, Initial selection does not work

+ Enable "New Mesh" option in Create Boundary Elements dialog independently of type of selected object
    (SMESHGUI_Make2DFrom3DOp.cxx)

4 years agoIPAL52935: "Apply and Close" button is not available in "Make 0D Elements on Element...
eap [Tue, 27 Oct 2015 17:47:31 +0000 (20:47 +0300)]
IPAL52935: "Apply and Close" button is not available in "Make 0D Elements on Element Nodes" dialog box
   (SMESHGUI_Add0DElemsOnAllNodesDlg.cxx)

Eliminate compilation warnings (all the rest files)

4 years agoSet development flag to 1
vsr [Mon, 19 Oct 2015 08:25:16 +0000 (11:25 +0300)]
Set development flag to 1

4 years agoIncrement version: 7.7.0 fix_for_770 V7_7_0 V7_7_0_WIN V7_7_0rc1
vsr [Thu, 15 Oct 2015 05:57:03 +0000 (08:57 +0300)]
Increment version: 7.7.0

4 years agoFix compilation error on Linux caused by previous commit
vsr [Wed, 14 Oct 2015 14:53:01 +0000 (17:53 +0300)]
Fix compilation error on Linux caused by previous commit

4 years agoWindows compatibility
ana [Wed, 14 Oct 2015 13:38:35 +0000 (16:38 +0300)]
Windows compatibility

4 years ago23179: EDF 11603 - Problem with extrusion when path is not well oriented
eap [Fri, 9 Oct 2015 14:47:17 +0000 (17:47 +0300)]
23179: EDF 11603 - Problem with extrusion when path is not well oriented
HYDRO module: Feature #523: river, channel, embankment meshing

4 years agoINT PAL 52920: TC7.7.0: Button is to small for its label
vsr [Fri, 9 Oct 2015 12:54:46 +0000 (15:54 +0300)]
INT PAL 52920: TC7.7.0: Button is to small for its label

4 years agoFix for the '22047: Automatic Tetrahedralization - field Length is shown not from...
rnv [Thu, 8 Oct 2015 15:07:19 +0000 (18:07 +0300)]
Fix for the '22047: Automatic Tetrahedralization - field Length is shown not from beginning of the number' issue.

4 years agoIPAL52860: Free Edges control mis-location and mis-visibility
eap [Thu, 8 Oct 2015 14:32:17 +0000 (17:32 +0300)]
IPAL52860: Free Edges control mis-location and mis-visibility

4 years agoIPAL52916: TC7.7.0:Triangle in "Threshold value" is missing after applying filter...
eap [Thu, 8 Oct 2015 14:25:45 +0000 (17:25 +0300)]
IPAL52916: TC7.7.0:Triangle in "Threshold value" is missing after applying filter with criterion "Geometry type"

4 years agoIPAL52915: TC7.7.0:Preview is disappears in OB
eap [Thu, 8 Oct 2015 14:23:39 +0000 (17:23 +0300)]
IPAL52915: TC7.7.0:Preview is disappears in OB

4 years agoFrench translations and minor fixes in the english version.
Florian BRUNET [Tue, 6 Oct 2015 16:22:10 +0000 (18:22 +0200)]
French translations and minor fixes in the english version.

4 years ago23179: EDF 11603 - Problem with extrusion when path is not well oriented
eap [Wed, 7 Oct 2015 15:06:26 +0000 (18:06 +0300)]
23179: EDF 11603 - Problem with extrusion when path is not well oriented
IPAL52909: TC7.7.0: edges selection provides incorrect nodes IDs
IPAL52895: TC7.7.0: Incorrect behaviour of the "Move Node" dialog.
IPAL52910: TC7.7.0: mesh is not updated at Apply click in Smoothing dialog

4 years agoIPAL52868: Confusing error message when computing an imported mesh w/o algo assigned
eap [Mon, 5 Oct 2015 11:51:57 +0000 (14:51 +0300)]
IPAL52868: Confusing error message when computing an imported mesh w/o algo assigned
IPAL52888: Pattern Mapping fails to load from a face just after study loading

4 years agoUpdate translation files from Crowdin
Christophe Bourcier [Mon, 28 Sep 2015 12:37:06 +0000 (14:37 +0200)]
Update translation files from Crowdin

4 years ago23173: EDF 11552 - Problem using Add 0D element function
eap [Tue, 29 Sep 2015 16:25:32 +0000 (19:25 +0300)]
23173: EDF 11552 - Problem using Add 0D element function
IPAL52875: Extrusion along a path: the buttons are not active if the path is closed
IPAL52882: Hexahedron (i,j,k) makes a wrong mesh on a block with composite sides

4 years ago23156: EDF 9626 SMESH: Dump study produces a non-working script
eap [Fri, 25 Sep 2015 18:15:51 +0000 (21:15 +0300)]
23156: EDF 9626 SMESH: Dump study produces a non-working script
52874: List of available groups in 'Group' combo-box is empty for sub-mesh and group.
52871: Mesh Information dialog shows different number of nodes for group of elements
Regression of Grids/smesh/sewing_00/A5

4 years agoFix misprint
akl [Fri, 25 Sep 2015 08:44:59 +0000 (12:44 +0400)]
Fix misprint

4 years ago23081: [CEA 1496] Control merge nodes behaviour: set fixed nodes
eap [Thu, 24 Sep 2015 16:17:33 +0000 (19:17 +0300)]
23081: [CEA 1496] Control merge nodes behaviour: set fixed nodes

Change dlg layout by request of http://salome.mantis.opencascade.com/view.php?id=23081#c20415

4 years agoINT PAL 0052873: IDs are not updated
imn [Wed, 23 Sep 2015 15:14:03 +0000 (18:14 +0300)]
INT PAL 0052873: IDs are not updated

4 years agoDebug 23078: [CEA 1498] Sewing of meshes without having to set the nodes ids
eap [Wed, 23 Sep 2015 14:47:26 +0000 (17:47 +0300)]
Debug 23078: [CEA 1498] Sewing of meshes without having to set the nodes ids

4 years agoAdd naming of fields in Mesh Informaion dialog.
akl [Wed, 23 Sep 2015 09:28:37 +0000 (13:28 +0400)]
Add naming of fields in Mesh Informaion dialog.

4 years agoIMP 23078: [CEA 1498] Sewing of meshes without having to set the nodes ids V7_7_0b1
eap [Fri, 18 Sep 2015 14:10:34 +0000 (17:10 +0300)]
IMP 23078: [CEA 1498] Sewing of meshes without having to set the nodes ids

4 years agoINT PAL 0013201: Error during edit mesh
imn [Wed, 16 Sep 2015 09:34:16 +0000 (12:34 +0300)]
INT PAL 0013201: Error during edit mesh

4 years agoINT PAL 0052858: VTK viewer is not updated at 'Controls - Reset' call
mpa [Mon, 14 Sep 2015 09:51:08 +0000 (12:51 +0300)]
INT PAL 0052858: VTK viewer is not updated at 'Controls - Reset' call

4 years agoIPAL52867: Crash at attempt to create group by 'Color of Group' filter
eap [Thu, 10 Sep 2015 17:50:31 +0000 (20:50 +0300)]
IPAL52867: Crash at attempt to create group by 'Color of Group' filter

4 years ago52863: Convert To Bi-Quadratic incorrectly locate in-face central nodes
eap [Tue, 8 Sep 2015 14:24:05 +0000 (17:24 +0300)]
52863: Convert To Bi-Quadratic incorrectly locate in-face central nodes
52865: Wrong order of children under a sub-mesh in the Object Browser

4 years agoINT PAL 0052864: Assigned algorithms are not shown in Edit Mesh dialog
imn [Mon, 7 Sep 2015 13:12:52 +0000 (16:12 +0300)]
INT PAL 0052864: Assigned algorithms are not shown in Edit Mesh dialog

4 years agoIPAL52650: Convert to quadratic fails on an ellipsoid. V7_7_0a1
eap [Fri, 4 Sep 2015 17:35:06 +0000 (20:35 +0300)]
IPAL52650: Convert to quadratic fails on an ellipsoid.
IPAL52659: Pattern file is not readable
IPAL18558: Wrong information of the created sub-mesh is shown.

4 years agoIPAL52860: Free Edges control mis-location and mis-visibility
eap [Fri, 4 Sep 2015 13:55:55 +0000 (16:55 +0300)]
IPAL52860: Free Edges control mis-location and mis-visibility
IPAL19098: Confusing "Precision" of "Average Length" implemented for NPAL17873

4 years agoFix "Assign a set of hypotheses" on available hypotheses in create mesh dialog box
imn [Fri, 4 Sep 2015 12:03:02 +0000 (15:03 +0300)]
Fix "Assign a set of hypotheses" on available hypotheses in create mesh dialog box

4 years ago23151: EDF 9626 SMESH: Opening an existing study makes salome end with an allocation...
eap [Wed, 2 Sep 2015 14:39:00 +0000 (17:39 +0300)]
23151: EDF 9626 SMESH: Opening an existing study makes salome end with an allocation error when closing.
  Fix ~SMESH_Gen_i()

Regression 2D_mesh_Polygons_00/A2
  Fix DriverSTL_W_SMDS_Mesh.cxx

IPAL52658: Quadrangle (Mapping) makes invalid mesh with Enforced vertices
IPAL52654: Quadrangle (Mapping) with enforced vertices works wrong
IPAL20729: Difference in behaviour of selection for Rotation against Translation, Symmetry after Apply.
IPAL9947: SMESH – Merge nodes dialog box

4 years agoFixed filtering in create mesh dialog box
imn [Wed, 2 Sep 2015 10:13:46 +0000 (13:13 +0300)]
Fixed filtering in create mesh dialog box

4 years agoIPAL52781: Orientation of a wall face created by revolution is wrong
eap [Fri, 28 Aug 2015 17:03:25 +0000 (20:03 +0300)]
IPAL52781: Orientation of a wall face created by revolution is wrong
IPAL52850: ConvertToQuadratic creates invalid triangles
Regression of imps_09/K0

4 years agoBugfix: removal of an unecessary job duration parameter in padder. fbt/padder_job_duration_fix
Florian BRUNET [Fri, 28 Aug 2015 07:11:07 +0000 (09:11 +0200)]
Bugfix: removal of an unecessary job duration parameter in padder.

4 years ago23142: EDF 11419 SMESH: Details about extrusion methods
eap [Tue, 25 Aug 2015 17:15:49 +0000 (20:15 +0300)]
23142: EDF 11419 SMESH: Details about extrusion methods

Debug of [HYDRO module - Feature #523] river, channel, embankment meshing

+ Wrong meshing progress if an algo calls SMESH_Gen::Compute()

4 years ago23138: EDF SMESH Regression: New behavior with ExtrusionSweepObject
eap [Thu, 20 Aug 2015 16:23:10 +0000 (19:23 +0300)]
23138: EDF SMESH Regression: New behavior with ExtrusionSweepObject
IPAL52830: "Mesh computation fails" and "Evaluate" dialogs do not have [Help] button
IPAL52782: Invalid polygon after merge

4 years ago52846: It is impossible to select edge in OB as reversed edge for hypothesis
eap [Wed, 19 Aug 2015 14:32:58 +0000 (17:32 +0300)]
52846: It is impossible to select edge in OB as reversed edge for hypothesis
52826: Radial Quadrangle algorithm meshes a quad face from which a circle was cut from but it must fail
52227: Group is not shown during edition
52780: Wrong mesh after STL re-import of a polygonal element
52825: Sew Borders does not care of segment adjacent to split faces, thus segments become non-conformal
52824: Sew Free Borders sews borders as conformal thus producing very skewed quads instead of polygons

5 years ago52780: Wrong mesh after STL re-import of a concave polygonal element
eap [Fri, 14 Aug 2015 17:14:27 +0000 (20:14 +0300)]
52780: Wrong mesh after STL re-import of a concave polygonal element

5 years agoFix 17 regressions
eap [Fri, 14 Aug 2015 10:31:06 +0000 (13:31 +0300)]
Fix 17 regressions

5 years agoWin32 compatibility
ana [Mon, 10 Aug 2015 17:00:26 +0000 (20:00 +0300)]
Win32 compatibility

5 years ago22635: EDF 8345 - Creation of group based on groups
eap [Thu, 6 Aug 2015 14:13:42 +0000 (17:13 +0300)]
22635: EDF 8345 - Creation of group based on groups

Fix for a dump script generated by 7.5.1

5 years agoFix regressions caused by improvements
eap [Wed, 5 Aug 2015 17:59:31 +0000 (20:59 +0300)]
Fix regressions caused by improvements

5 years ago23126: [CEA 1562] Regression : Wrong nodes position using SetEnforcedVertex on a...
eap [Mon, 3 Aug 2015 17:45:26 +0000 (20:45 +0300)]
23126: [CEA 1562] Regression : Wrong nodes position using SetEnforcedVertex on a sphere
   Fix SMESH_MesherHelper::IsQuadraticSubMesh()

IPAL52836: A sub-face of a box can't be selected in OB to be added to Viscous Layers hypothesis
   Fix StdMeshersGUI_SubShapeSelectorWdg::selectionIntoArgument()

5 years ago22599: EDF 8159 SMESH: Bad groups created by extrusion
eap [Mon, 3 Aug 2015 13:08:55 +0000 (16:08 +0300)]
22599: EDF 8159 SMESH: Bad groups created by extrusion

  Update docs

5 years agoINT PAL 0052834: Widget in the "Viscous layers" hypothesis isn't updated
mpa [Thu, 30 Jul 2015 08:00:04 +0000 (11:00 +0300)]
INT PAL 0052834: Widget in the "Viscous layers" hypothesis isn't updated

5 years agoSIMAN removal agr/siman_removal
Cédric Aguerre [Tue, 28 Jul 2015 15:06:26 +0000 (17:06 +0200)]
SIMAN removal

5 years agoAdd methods to select mesh elements from python.
rnv [Wed, 22 Jul 2015 15:13:50 +0000 (18:13 +0300)]
Add methods to select mesh elements from python.

5 years agoIPAL52827: Very few filtering criteria available in filter dialog called from Remove...
eap [Thu, 16 Jul 2015 17:52:26 +0000 (20:52 +0300)]
IPAL52827: Very few filtering criteria available in filter dialog called from Remove Elements dialog
IPAL52831: Veeery long awaiting for Mesh Information dialog appearance
IPAL52822: Find Elements By Point does not find coincident nodes
IPAL52821: Find Elements By Point dialog: no types available for search if there are only nodes in the mesh
IPAL52823: mesh.GetSubMeshElementsId( subShape ) works wrong if subShape is retrieved indirectly

5 years agoFix for the '21907: EDF 2397 SMESH: Bugs with "Viscous Layers"' issue.
rnv [Thu, 16 Jul 2015 07:24:49 +0000 (10:24 +0300)]
Fix for the '21907: EDF 2397 SMESH: Bugs with "Viscous Layers"' issue.

5 years agoFix regressions caused by improvements
eap [Wed, 15 Jul 2015 14:05:14 +0000 (17:05 +0300)]
Fix regressions caused by improvements

5 years agoFix regressions caused by improvements
eap [Mon, 13 Jul 2015 17:52:43 +0000 (20:52 +0300)]
Fix regressions caused by improvements

2D_mesh_QuadranglePreference_00/A2
3D_mesh_NETGEN_02/C7
2D_mesh_MaxElementArea_00/A0

5 years ago23076: [CEA 1499] Get in python all sub-shapes in error after Compute
eap [Fri, 10 Jul 2015 19:34:27 +0000 (22:34 +0300)]
23076: [CEA 1499] Get in python all sub-shapes in error after Compute

5 years ago23081: [CEA 1496] Control merge nodes behaviour: set fixed nodes
eap [Fri, 10 Jul 2015 16:39:03 +0000 (19:39 +0300)]
23081: [CEA 1496] Control merge nodes behaviour: set fixed nodes

5 years ago23072: [CEA 1500] Split biquadratic elements into linear elements
eap [Thu, 9 Jul 2015 09:41:53 +0000 (12:41 +0300)]
23072: [CEA 1500] Split biquadratic elements into linear elements

5 years ago23068: [CEA 1505] Be able to keep meshing in 2D after having merged the nodes in 1D
eap [Tue, 7 Jul 2015 14:33:01 +0000 (17:33 +0300)]
23068: [CEA 1505] Be able to keep meshing in 2D after having merged the nodes in 1D

5 years ago23111: [CEA 1541] copy.deepcopy does not work on an objet of type Mesh
eap [Mon, 6 Jul 2015 13:41:46 +0000 (16:41 +0300)]
23111: [CEA 1541] copy.deepcopy does not work on an objet of type Mesh

5 years ago23080: [CEA 1497] Do not merge a middle node in quadratic with the extreme nodes...
eap [Wed, 1 Jul 2015 11:59:24 +0000 (14:59 +0300)]
23080: [CEA 1497] Do not merge a middle node in quadratic with the extreme nodes of a segment

5 years ago23070: [CEA 1502] Create the 2D mesh from the 1D mesh with one mesh face for each...
eap [Tue, 30 Jun 2015 12:14:46 +0000 (15:14 +0300)]
23070: [CEA 1502] Create the 2D mesh from the 1D mesh with one mesh face for each geom face

5 years agoINT PAL 0052786: <None> 2D algorithm shown when mesh edition invoked
imn [Mon, 29 Jun 2015 16:34:27 +0000 (19:34 +0300)]
INT PAL 0052786: <None> 2D algorithm shown when mesh edition invoked

5 years ago23121: EDF 11163 SMESH: Orphan node generated on a 3D mesh
eap [Fri, 26 Jun 2015 17:09:20 +0000 (20:09 +0300)]
23121: EDF 11163 SMESH: Orphan node generated on a 3D mesh

5 years agoFrom NewGEOM: activation of SMESH after any module without object browser crashes...
vsr [Wed, 24 Jun 2015 16:01:14 +0000 (19:01 +0300)]
From NewGEOM: activation of SMESH after any module without object browser crashes application

5 years ago23118: EDF 11115 SMESH: Hexahedric mesh produces degenerate elements in quadratic...
eap [Wed, 24 Jun 2015 15:58:16 +0000 (18:58 +0300)]
23118: EDF 11115 SMESH: Hexahedric mesh produces degenerate elements in quadratic conversion.

  Fix an invalid commit

5 years ago0023118: EDF 11115 SMESH: Hexahedric mesh produces degenerate elements in quadratic...
eap [Wed, 24 Jun 2015 15:12:35 +0000 (18:12 +0300)]
0023118: EDF 11115 SMESH: Hexahedric mesh produces degenerate elements in quadratic conversion.

Improve Hexahedron (i,j,k) to work on composite block with non-continues sub-side FACEs

5 years ago0023102: [CEA 1486 ] Add the parameters for defining the boundary layers
mpa [Wed, 24 Jun 2015 09:48:09 +0000 (12:48 +0300)]
0023102: [CEA 1486 ] Add the parameters for defining the boundary layers

5 years ago0023064: [CEA 1471] Create and support quadratic polygons in SMESH
eap [Wed, 24 Jun 2015 09:17:07 +0000 (12:17 +0300)]
0023064: [CEA 1471] Create and support quadratic polygons in SMESH

5 years agoINT PAL 0052778: Algorithms of SMESH plugins have incorrect set of hypotheses
imn [Mon, 22 Jun 2015 12:06:00 +0000 (15:06 +0300)]
INT PAL 0052778: Algorithms of SMESH plugins have incorrect set of hypotheses

5 years agoWindows compatibility
ana [Wed, 17 Jun 2015 15:16:00 +0000 (18:16 +0300)]
Windows compatibility

5 years agoFix misprint
vsr [Tue, 16 Jun 2015 09:25:19 +0000 (12:25 +0300)]
Fix misprint

5 years ago[HYDRO module - Feature #523] river, channel, embankment meshing
eap [Mon, 15 Jun 2015 18:31:23 +0000 (21:31 +0300)]
[HYDRO module - Feature #523] river, channel, embankment meshing

5 years agoCMake improvement: usage of SALOME_GUI_MODE() macro
mpa [Thu, 11 Jun 2015 13:21:30 +0000 (16:21 +0300)]
CMake improvement: usage of SALOME_GUI_MODE() macro

5 years agoINT PAL 0052775: Any dialogue with the selector raises an exception for second viewer
imn [Tue, 9 Jun 2015 09:28:15 +0000 (12:28 +0300)]
INT PAL 0052775: Any dialogue with the selector raises an exception for second viewer

5 years agoINT PAL 0052727: Fitering algorithms according to geometry does not work in Create...
imn [Tue, 9 Jun 2015 09:06:53 +0000 (12:06 +0300)]
INT PAL 0052727: Fitering algorithms according to geometry does not work in Create mesh dialog

5 years agoTurn DEV version flag ON
vsr [Wed, 3 Jun 2015 09:57:42 +0000 (12:57 +0300)]
Turn DEV version flag ON

5 years agoHelp Update for version 7.6.0 fix_for_760
ysn [Mon, 25 May 2015 09:40:41 +0000 (12:40 +0300)]
Help Update for version 7.6.0

5 years agoCorrect installation path for padder plugin documentation V7_6_BR V7_6_0 V7_6_0rc1
vsr [Thu, 21 May 2015 14:59:51 +0000 (17:59 +0300)]
Correct installation path for padder plugin documentation

5 years agoIPAL13978: Problem of updating SubMeshes on Face and Compound in Object Browser after...
eap [Fri, 15 May 2015 18:20:14 +0000 (21:20 +0300)]
IPAL13978: Problem of updating SubMeshes on Face and Compound in Object Browser after compute of mesh
   Fix a bug that icons updated starting from the 4th child of mesh object

IPAL13023: To correct alignment for output of "Dump()" functionality.

5 years agoIPAL52735: Modification of Geom group breaks a mesh
eap [Fri, 15 May 2015 17:14:18 +0000 (20:14 +0300)]
IPAL52735: Modification of Geom group breaks a mesh
  Description: If there are two meshes based on the same geom group, modification of the group breaks one of meshes. Compute, Edit mesh and some other commands are missing from the pop-up of the broken mesh.

5 years ago52747: Wrong doc page opened from Scalar Bar Properties dialog
eap [Thu, 14 May 2015 11:58:45 +0000 (14:58 +0300)]
52747: Wrong doc page opened from Scalar Bar Properties dialog

5 years agoUpdate docs
eap [Thu, 14 May 2015 09:51:53 +0000 (12:51 +0300)]
Update docs

5 years agoRegression of smesh/mesh_Projection_2D_01/B7
eap [Wed, 13 May 2015 13:03:36 +0000 (16:03 +0300)]
Regression of smesh/mesh_Projection_2D_01/B7
   Fix SMESH_MeshEditor::Smooth()

Optimize a bit SMDS_MeshNode::GetInverseElementIterator()

Minimize usage of BRepClass_FaceClassifier in StdMeshers_Import_1D2D::Compute()

5 years ago23092: EDF 10836 SMESH: UseExisting2DElements fails when geometry contains more than...
eap [Fri, 8 May 2015 15:49:31 +0000 (18:49 +0300)]
23092: EDF 10836 SMESH: UseExisting2DElements fails when geometry contains more than one face
   Decrease 2D tolerance user for UV classification

5 years agoIPAL52698: Convert to quadratic is wrong (hard periodic surfaces)
eap [Thu, 7 May 2015 17:57:17 +0000 (20:57 +0300)]
IPAL52698: Convert to quadratic is wrong (hard periodic surfaces)

5 years agoMerge branch 'fix_for_760' of salome:modules/smesh into fix_for_760
ana [Thu, 7 May 2015 14:07:05 +0000 (17:07 +0300)]
Merge branch 'fix_for_760' of salome:modules/smesh into fix_for_760

5 years agoPorting on Windows
ana [Thu, 7 May 2015 14:06:54 +0000 (17:06 +0300)]
Porting on Windows

5 years agoSwitch some French translations to lower case and remove old keys
Christophe Bourcier [Thu, 7 May 2015 08:54:49 +0000 (10:54 +0200)]
Switch some French translations to lower case and remove old keys

5 years agofix previous wrong integration
ana [Thu, 7 May 2015 09:35:19 +0000 (12:35 +0300)]
fix previous wrong integration

5 years agoWindows compatibility
ana [Thu, 7 May 2015 09:16:49 +0000 (12:16 +0300)]
Windows compatibility

5 years agoFix regressions bugs_14/P9 (Prism 3D) and bugs_19/X1 (Projection 2D)
eap [Wed, 6 May 2015 17:05:12 +0000 (20:05 +0300)]
Fix regressions bugs_14/P9 (Prism 3D) and bugs_19/X1 (Projection 2D)

5 years agoModification into CMakeList for SMESH mpi compilation.
Florian BRUNET [Tue, 5 May 2015 09:42:29 +0000 (11:42 +0200)]
Modification into CMakeList for SMESH mpi compilation.