typ = 'TXM',
into = ['ZERO ELEVATION','CONSTANT ELEVATION','ZERO DEPTH','CONSTANT DEPTH','SPECIAL','PARTICULIERES','PARTICULAR','TPXO SATELLITE ALTIMETRY'],
defaut = 'ZERO ELEVATION',
- fr = """ Permet de definir les conditions initiales sur les hauteurs d''eau.
+ fr = """Permet de definir les conditions initiales sur
+les hauteurs d''eau.
Les valeurs possibles sont :
-- COTE NULLE.
-Initialise la cote de surface libre a 0. Les hauteurs d''eau initiales
-sont alors retrouvees en faisant la difference entre les cotes de
-surface libre et du fond.
-- COTE CONSTANTE .
-Initialise la cote de surface libre a la valeur donnee par le mot-cle
-COTE INITIALE. Les hauteurs d''eau initiales sont calculees comme
-precedemment.
-- HAUTEUR NULLE .
-Initialise les hauteurs d''eau a 0.
-- HAUTEUR CONSTANTE.
-Initialise les hauteurs d''eau a la valeur donnee par le mot-cle HAUTEUR
-INITIALE.
-- PARTICULIERES.
-Les conditions initiales sur la hauteur d''eau doivent etre precisees
-dans le sous-programme CONDIN.
-- ALTIMETRIE SATELLITE TPXO. Les conditions initiales sur la hauteur
- d''eau et les vitesses sont etiblies sur la base des donnees satellite
-TPXO dont les 8 premiers constistuents ont ete extrait et sauves dans le
-fichier BASE DE DONNEES DE MAREE.""",
- ang = """ Makes it possible to define the initial conditions with the water
-depth. The possible values are as follows:
-- ZERO ELEVATION-.
-Initializes the free surface elevation to 0. The initial water depths
-are then found by computing the difference between the free surface and
-the bottom.
-- CONSTANT ELEVATION-.
-Initializes the water elevation to
-the value given by the keyword -INITIAL ELEVATION-. The initial water
-depths are computed as in the previous case.
-- ZERO DEPTH-.
-Initializes
-the water depths to 0.
-- CONSTANT DEPTH-. Initializes the water depths
-to the value given by the key-word -INITIAL DEPTH-.
-- SPECIAL-.
-The initial conditions with the water depth should be stated in the
-CONDIN subroutine.
-- TPXO SATELITE ALTIMETRY.
-The initial conditions on the free surface and velocities are
-established from the TPXO satellite program data, the harmonic
+ - COTE NULLE. Initialise la cote de surface libre a 0.
+ Les hauteurs d''eau initiales sont alors retrouvees en
+ faisant la difference entre les cotes de surface libre
+ et du fond.
+ - COTE CONSTANTE .Initialise la cote de surface libre a la
+ valeur donnee par le mot-cle COTE INITIALE. Les hauteurs
+ d''eau initiales sont calculees comme precedemment.
+ - HAUTEUR NULLE .Initialise les hauteurs d''eau a 0.
+ - HAUTEUR CONSTANTE. Initialise les hauteurs d''eau a la valeur
+ donnee par le mot-cle HAUTEUR INITIALE.
+ - PARTICULIERES. Les conditions initiales sur la hauteur d''eau
+ doivent etre precisees dans le sous-programme CONDIN.
+ - ALTIMETRIE SATELLITE TPXO. Les conditions initiales sur la hauteur
+ d''eau et les vitesses sont etiblies sur la base des donnees
+ satellite TPXO dont les 8 premiers constistuents
+ont ete extrait
+ et sauves dans le fichier BASE DE DONNEES DE MAREE.""",
+ ang = """Makes it possible to define the initial conditions with
+the water depth.
+The possible values are as follows:
+ - ZERO ELEVATION-. Initializes the free surface elevation to 0.
+The initial water depths are then found by computing the difference
+between the free surface and the bottom.
+ - CONSTANT ELEVATION-. Initializes the water elevation to the value
+given by the keyword -INITIAL ELEVATION-. The initial water depths
+are computed as in the previous case.
+ - ZERO DEPTH-. Initializes the water depths to 0.
+ - CONSTANT DEPTH-. Initializes the water depths to the value given
+by the key-word -INITIAL DEPTH-.
+ - SPECIAL-. The initial conditions with the water depth should be
+stated in the CONDIN subroutine.
+ - TPXO SATELITE ALTIMETRY. The initial conditions on the
+free surface and
+velocities are established from the TPXO satellite program data,
+the harmonic
constituents of which are stored in the TIDE DATA BASE file.""",
),
# -----------------------------------
# -----------------------------------
typ = 'R',
defaut = 0.,
- fr = """ Valeur utilisee avec l''option : CONDITIONS INITIALES - COTE
-CONSTANTE""",
- ang = """ Value to be used with the option : INITIAL CONDITIONS -CONSTANT
-ELEVATION""",
+ fr = """Valeur utilisee avec l''option :
+ CONDITIONS INITIALES - COTE CONSTANTE""",
+ ang = """Value to be used with the option :
+INITIAL CONDITIONS -CONSTANT ELEVATION""",
),
),
# -----------------------------------
# -----------------------------------
typ = 'R',
defaut = 0.,
- fr = """ Valeur utilisee avec l''option : CONDITIONS INITIALES :-HAUTEUR
-CONSTANTE-""",
- ang = """ Value to be used along with the option: INITIAL CONDITIONS -CONSTANT
-DEPTH-""",
+ fr = """Valeur utilisee avec l''option :
+CONDITIONS INITIALES :-HAUTEUR CONSTANTE-""",
+ ang = """Value to be used along with the option:
+ INITIAL CONDITIONS -CONSTANT DEPTH-""",
),
),
# -----------------------------------
typ = 'TXM',
into = ['BIN','SERAFIN','SERAFIND','MED'],
defaut = 'BIN',
- fr = """ Format du fichier de donnes binaire. Les valeurs possibles sont : -
-BIN : format binaire standard - SERAFIN : format standard simple
-precision pour Telemac; - SERAFIND: format standard double precision
-pour Telemac; - MED : format MED base sur HDF5""",
- ang = """ Binary data file 1 format. Possible values are: - BIN : Standard
-binary format - SERAFIN : classical single precision format in Telemac;
-- SERAFIND: classical double precision format in Telemac; - MED : MED
-format based on HDF5""",
+ fr = """Format du fichier de geometrie.
+Les valeurs possibles sont :
+- BIN : format binaire standard
+- SERAFIN : format standard simple precision pour Telemac;
+- SERAFIND: format standard double precision pour Telemac;
+- MED : format MED base sur HDF5""",
+ ang = """Geometry file format.
+Possible values are:
+- BIN : Standard binary format
+- SERAFIN : classical single precision format in Telemac;
+- SERAFIND: classical double precision format in Telemac;
+- MED : MED format based on HDF5""",
),
# -----------------------------------
BINARY_DATA_FILE_1 = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = '',
- fr = """ Fichier de donnees code en binaire mis a la disposition de
-l''utilisateur. Les donnees de ce fichier seront a lire sur le canal
-24.""",
- ang = """ Binary-coded data file made available to the user. The data in this
-file shall be read on channel 24.""",
+ fr = """Fichier de donnees code en binaire mis a la disposition
+de l''utilisateur.
+Les donnees de ce fichier seront a lire sur le canal 24.""",
+ ang = """Binary-coded data file made available to the user.
+The data in this file shall be read on channel 24.""",
),
# -----------------------------------
BINARY_DATA_FILE_2_FORMAT = SIMP(statut ='f',
typ = 'TXM',
into = ['BIN','SERAFIN','SERAFIND','MED'],
defaut = 'BIN',
- fr = """ Format du fichier de donnees binaire 2. Les valeurs possibles sont : -
-BIN : format binaire standard - SERAFIN : format standard simple
-precision pour Telemac; - SERAFIND: format standard double precision
-pour Telemac; - MED : format MED base sur HDF5""",
- ang = """ Binary data file 2 format. Possible values are: - BIN : Standard
-binary format - SERAFIN : classical single precision format in Telemac;
-- SERAFIND: classical double precision format in Telemac; - MED : MED
-format based on HDF5""",
+ fr = """Format du fichier de geometrie.
+Les valeurs possibles sont :
+- BIN : format binaire standard
+- SERAFIN : format standard simple precision pour Telemac;
+- SERAFIND: format standard double precision pour Telemac;
+- MED : format MED base sur HDF5""",
+ ang = """Geometry file format.
+Possible values are:
+- BIN : Standard binary format
+- SERAFIN : classical single precision format in Telemac;
+- SERAFIND: classical double precision format in Telemac;
+- MED : MED format based on HDF5""",
),
# -----------------------------------
BINARY_DATA_FILE_2 = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = '',
- fr = """ Fichier de donnees code en binaire mis a la disposition de
-l''utilisateur. Les donnees de ce fichier seront a lire sur le canal
-25.""",
- ang = """ Binary-coded data file made available to the user. The data in this
-file shall be read on channel 25.""",
+ fr = """Fichier de donnees code en binaire mis a la disposition
+de l''utilisateur.
+Les donnees de ce fichier seront a lire sur le canal 25.""",
+ ang = """Binary-coded data file made available to the user.
+The data in this file shall be read on channel 25.""",
),
# -----------------------------------
FORMATTED_DATA_FILE_1 = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = '',
- fr = """ Fichier de donnees formate mis a la disposition de l''utilisateur. Les
-donnees de ce fichier seront a lire sur le canal 26.""",
- ang = """ Formatted data file made available to the user. The data in this file
-shall be read on channel 26.""",
+ fr = """Fichier de donnees formate mis a la disposition de
+l''utilisateur.
+Les donnees de ce fichier seront a lire sur le canal 26.""",
+ ang = """Formatted data file made available to the user.
+The data in this file shall be read on channel 26.""",
),
# -----------------------------------
FORMATTED_DATA_FILE_2 = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = '',
- fr = """ Fichier de donnees formate mis a la disposition de l''utilisateur. Les
-donnees de ce fichier seront a lire sur le canal 27.""",
- ang = """ Formatted data file made available to the user. The data in this file
-shall be read on channel 27.""",
+ fr = """Fichier de donnees formate mis a la disposition de
+l''utilisateur.
+Les donnees de ce fichier seront a lire sur le canal 27.""",
+ ang = """Formatted data file made available to the user.
+The data in this file shall be read on channel 27.""",
),
# -----------------------------------
INPUT_FILES = FACT(statut='o',
GEOMETRY_FILE_FORMAT = SIMP(statut ='o',
# -----------------------------------
typ = 'TXM',
- into = ['SERAFIN?','SERAFIND','MED'],
- defaut = 'SERAFIN?',
- fr = """ Format du fichier de geometrie. Les valeurs possibles sont : - SERAFIN
-: format standard simple precision pour Telemac; - SERAFIND: format
-standard double precision pour Telemac; - MED : format MED base sur
-HDF5""",
- ang = """ Geometry file format. Possible values are: - SERAFIN : classical
-single precision format in Telemac; - SERAFIND: classical double
-precision format in Telemac; - MED : MED format based on HDF5""",
+ into = ['SERAFIN','SERAFIND','MED'],
+ defaut = 'SERAFIN',
+ fr = """Format du fichier de geometrie.
+Les valeurs possibles sont :
+- SERAFIN : format standard simple precision pour Telemac;
+- SERAFIND: format standard double precision pour Telemac;
+- MED : format MED base sur HDF5""",
+ ang = """Geometry file format.
+Possible values are:
+- SERAFIN : classical single precision format in Telemac;
+- SERAFIND: classical double precision format in Telemac;
+- MED : MED format based on HDF5""",
),
# -----------------------------------
GEOMETRY_FILE = SIMP(statut ='o',
# -----------------------------------
typ = ('Fichier','All Files (*)'),
- fr = """ Nom du fichier contenant le maillage du calcul a realiser.""",
- ang = """ Name of the file containing the mesh. This file may also contain the
-topography and the friction coefficients.""",
+ fr = """Nom du fichier contenant le maillage du calcul a realiser.""",
+ ang = """Name of the file containing the mesh. This file may also
+contain the topography and the friction coefficients.""",
),
# -----------------------------------
FORTRAN_FILE = SIMP(statut ='f',
# -----------------------------------
typ = 'FichierOuRepertoire',
defaut = 'DEFAUT',
- fr = """ Nom du fichier FORTRAN a soumettre.""",
- ang = """ Name of FORTRAN file to be submitted.""",
+ fr = """Nom du fichier FORTRAN a soumettre.""",
+ ang = """Name of FORTRAN file to be submitted.""",
),
# -----------------------------------
BOTTOM_TOPOGRAPHY_FILE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = '',
- fr = """ Nom du fichier eventuel contenant la bathymetrie associee au maillage.
+ fr = """Nom du fichier eventuel contenant la bathymetrie associee au
+maillage.
Si ce mot-cle est utilise; c''est cette bathymetrie qui sera utilisee
pour le calcul.""",
- ang = """ Name of the possible file containing the bathymetric data. Where this
-keyword is used, these bathymetric data shall be used in the
-computation.""",
+ ang = """Name of the possible file containing the bathymetric data.
+Where this keyword is used, these bathymetric data shall be used in
+the computation.""",
),
# -----------------------------------
BOTTOM_SMOOTHINGS = SIMP(statut ='o',
# -----------------------------------
typ = 'I',
defaut = 0,
- fr = """ Nombre de lissages effectues sur la topographie. chaque lissage,
-effectue a l''aide d''une matrice de masse, est conservatif. Utilise
-lorsque les donnees de bathymetrie donnent des resultats trop
-irreguliers apres interpolation.""",
- ang = """ Number of smoothings on bottom topography. each smoothing is mass
-conservative. to be used when interpolation of bathymetry on the mesh
-gives very rough results.""",
+ fr = """Nombre de lissages effectues sur la topographie.
+chaque lissage, effectue a l''aide d''une matrice de masse,
+est conservatif.
+Utilise lorsque les donnees de bathymetrie donnent des resultats
+trop irreguliers apres interpolation.""",
+ ang = """Number of smoothings on bottom topography.
+each smoothing is mass conservative.
+to be used when interpolation of bathymetry on the mesh gives
+very rough results.""",
),
# -----------------------------------
BOUNDARY_CONDITIONS_FILE = SIMP(statut ='o',
# -----------------------------------
typ = ('Fichier','All Files (*)'),
- fr = """ Nom du fichier contenant les types de conditions aux limites. Ce
-fichier est rempli de facon automatique par le mailleur au moyen de
+ fr = """Nom du fichier contenant les types de conditions aux limites.
+Ce fichier est rempli de facon automatique par le mailleur au moyen de
couleurs affectees aux noeuds des frontieres du domaine de calcul.""",
- ang = """ Name of the file containing the types of boundary conditions. This
-file is filled automatically by the mesh generator through through
-colours that are assigned to the boundary nodes.""",
+ ang = """Name of the file containing the types of boundary conditions.
+This file is filled automatically by the mesh generator through
+through colours that are assigned to the boundary nodes.""",
),
# -----------------------------------
VALIDATION = SIMP(statut ='f',
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Option utilisee principalement pour le dossier de validation. Le
+ fr = """Option utilisee principalement pour le dossier de validation. Le
fichier des resultats du calcul precedent est alors considere comme une
reference a laquelle on va comparer le calcul. La comparaison est
effectuee par le sous-programme VALIDA qui peut etre une comparaison
avec une solution exacte par exemple.""",
- ang = """ This option is primarily used for the validation documents. The
+ ang = """This option is primarily used for the validation documents. The
PREVIOUS COMPUTATION FILE is then considered as a reference which the
computation is going to be compared with. The comparison is made by the
subroutine VALIDA, which can be modified as to so as to include, for
REFERENCE_FILE_FORMAT = SIMP(statut ='f',
# -----------------------------------
typ = 'TXM',
- into = ['SERAFIN?','SERAFIND','MED'],
- defaut = 'SERAFIN?',
- fr = """ Format du fichier de resultats du calcul precedent. Les valeurs
-possibles sont :
+ into = ['SERAFIN','SERAFIND','MED'],
+ defaut = 'SERAFIN',
+ fr = """Format du fichier de resultats du calcul precedent.
+Les valeurs possibles sont :
- SERAFIN : format standard simple precision pour Telemac;
- SERAFIND: format standard double precision pour Telemac;
-- MED : format MED base sur HDF5""",
- ang = """ Previous computation results file format. Possible values are:
+- MED : format MED base sur HDF5""",
+ ang = """Previous computation results file format.
+Possible values are:
- SERAFIN : classical single precision format in Telemac;
- SERAFIND: classical double precision format in Telemac;
-- MED : MED format based on HDF5""",
+- MED : MED format based on HDF5""",
),
# -----------------------------------
REFERENCE_FILE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = '',
- fr = """ Fichier de resultats de reference pour la validation. Les resultats a
+ fr = """Fichier de resultats de reference pour la validation. Les resultats a
placer dans ce fichier seront a ecrire sur le canal 22.""",
- ang = """ Binary-coded result file for validation. The results to be entered
+ ang = """Binary-coded result file for validation. The results to be entered
into this file shall be written on channel 22.""",
),
),
# -----------------------------------
typ = 'I',
defaut = 0,
- fr = """ NOMBRE DE PROCESSEURS EN CALCUL PARALLELE 0 : 1 machine, compilation
-sans bibliotheque de parallelisme 1 : 1 machine, compilation avec
-bibliotheque de parallelisme 2 : 2 processeurs ou machines en parallele
+ fr = """NOMBRE DE PROCESSEURS EN CALCUL PARALLELE
+0 : 1 machine, compilation sans bibliotheque de parallelisme
+1 : 1 machine, compilation avec bibliotheque de parallelisme
+2 : 2 processeurs ou machines en parallele
etc...""",
- ang = """ NUMBER OF PROCESSORS FOR PARALLEL PROCESSING 0 : 1 machine, compiling
-without parallel library 1 : 1 machine, compiling with a parallel
-library 2 : 2 processors or machines in parallel etc....""",
+ ang = """NUMBER OF PROCESSORS FOR PARALLEL PROCESSING
+0 : 1 machine, compiling without parallel library
+1 : 1 machine, compiling with a parallel library
+2 : 2 processors or machines in parallel
+etc....""",
),
# -----------------------------------
CHECKING_THE_MESH = SIMP(statut ='o',
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Si oui on appelle le sous-programme checkmesh qui verifie la coherence
-du maillage, points superposes, etc.""",
- ang = """ if this key word is equal to yes, a call to subroutine checkmesh will
-look for errors in the mesh, superimposed points, etc.""",
+ fr = """Si oui on appelle le sous-programme checkmesh qui verifie
+la coherence du maillage, points superposes, etc.""",
+ ang = """if this key word is equal to yes, a call to subroutine
+checkmesh will look for errors in the mesh, superimposed points, etc.""",
),
# -----------------------------------
MAXIMUM_NUMBER_OF_BOUNDARIES = SIMP(statut ='f',
# -----------------------------------
typ = 'I',
defaut = 30,
- fr = """ nombre maximal de frontieres differentes dans le maillage. Sert au
-dimensionnement de la memoire, a augmenter si necessaire""",
- ang = """ maximal number of boundaries in the mesh. Used for dimensioning
-arrays. Can be increased if needed""",
+ fr = """nombre maximal de frontieres differentes dans le maillage.
+Sert au dimensionnement de la memoire, a augmenter si necessaire""",
+ ang = """maximal number of boundaries in the mesh.
+Used for dimensioning arrays. Can be increased if needed""",
),
# -----------------------------------
MAXIMUM_NUMBER_OF_SOURCES = SIMP(statut ='f',
# -----------------------------------
typ = 'I',
defaut = 20,
- fr = """ nombre maximal de points sources dans le maillage. Sert au
-dimensionnement de la memoire, a augmenter si necessaire""",
- ang = """ maximal number of punctual sources in the mesh. Used for dimensioning
-arrays. Can be increased if needed""",
+ fr = """nombre maximal de points sources dans le maillage.
+Sert au dimensionnement de la memoire, a augmenter si necessaire""",
+ ang = """maximal number of punctual sources in the mesh.
+Used for dimensioning arrays. Can be increased if needed""",
),
# -----------------------------------
MAXIMUM_NUMBER_OF_TRACERS = SIMP(statut ='f',
# -----------------------------------
typ = 'I',
defaut = 20,
- fr = """ nombre maximal de traceurs. Sert au dimensionnement de la memoire, a
-augmenter si necessaire""",
- ang = """ maximal number of tracers. Used for dimensioning arrays. Can be
-increased if needed""",
+ fr = """nombre maximal de traceurs.
+Sert au dimensionnement de la memoire, a augmenter si necessaire""",
+ ang = """maximal number of tracers.
+Used for dimensioning arrays. Can be increased if needed""",
),
# -----------------------------------
VECTOR_LENGTH = SIMP(statut ='f',
# -----------------------------------
typ = 'I',
defaut = 1,
- fr = """ LONGUEUR DU VECTEUR POUR LES MACHINES VECTORIELLES""",
- ang = """ VECTOR LENGTH ON VECTOR MACHINES""",
+ fr = """LONGUEUR DU VECTEUR POUR LES MACHINES VECTORIELLES""",
+ ang = """VECTOR LENGTH ON VECTOR MACHINES""",
),
),
),
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Determine si le calcul en cours est independant de tout autre resultat
-ou est une reprise effectuee a partir du resultat d''un calcul
-precedent. NON : Il s''agit du premier passage pour ce calcul et il est
-necessaire de definir un jeu complet de conditions initiales OUI : Il
-s''agit d''une reprise de calcul : les conditions initiales sont
-constituees par le dernier pas de temps du FICHIER DU CALCUL PRECEDENT
-du fichier des parametres utilise pour soumettre le calcul. Par contre,
-l''ensemble des donnees du fichier des parametres peuvent etre
-redefinies ; ce qui offre la possibilite de changer par exemple, le pas
-de temps, le modele de turbulence, le frottement, d''ajouter ou retirer
-un traceur ... De meme, il est necessaire de definir des conditions aux
-limites (sous-programme BORD ou valeurs placees dans le fichier des
+ fr = """Determine si le calcul en cours est independant de tout autre
+resultat ou est une reprise effectuee a partir du resultat d''un calcul
+precedent.
+NON : Il s''agit du premier passage pour ce calcul et il est necessaire
+de definir un jeu complet de conditions initiales
+OUI : Il s''agit d''une reprise de calcul :
+les conditions initiales sont constituees par le dernier pas de
+temps du ''FICHIER DU CALCUL PRECEDENT'' du fichier des parametres
+utilise pour soumettre le calcul.
+Par contre, l''ensemble des donnees du fichier des parametres
+peuvent etre redefinies ; ce qui offre la possibilite de changer
+par exemple, le pas de temps, le modele de turbulence, le
+frottement, d''ajouter ou retirer un traceur ...
+De meme, il est necessaire de definir des conditions aux limites
+(sous-programme BORD ou valeurs placees dans le fichier des
parametres), qui peuvent egalement etre modifiees.""",
- ang = """ Determines whether the computation under way is independent result or
-is following an earlier result. NO: It is the first run for this
-computation and a whole set of initial conditions should be defined.
-YES: It follows a former computation: the initial conditions consist in
-the last time step of the PREVIOUS COMPUTATION FILE in the steering file
-used for submitting the computation. All the data from the steering file
-may be defined once again, which provides an opportunity to change, for
-example, the time step, the turbulence model, the friction, to add or
-remove a tracer... It is also possible to define new boundary
-conditions.""",
+ ang = """Determines whether the computation under way is independent
+result or is following an earlier result.
+NO: It is the first run for this computation and a whole set of
+initial conditions should be defined.
+YES: It follows a former computation:
+the initial conditions consist in the last time step of the
+PREVIOUS COMPUTATION FILE in the steering file used for submitting
+the computation.
+All the data from the steering file may be defined once again, which
+provides an opportunity to change, for example, the time step,
+the turbulence model, the friction, to add or remove a tracer...
+It is also possible to define new boundary conditions.""",
),
# -----------------------------------
b_COMPUTATION_CONTINUEDG = BLOC(condition="COMPUTATION_CONTINUED == True",
PREVIOUS_COMPUTATION_FILE_FORMAT = SIMP(statut ='o',
# -----------------------------------
typ = 'TXM',
- into = ['SERAFIN?','SERAFIND','MED'],
- defaut = 'SERAFIN?',
- fr = """ Format du fichier de resultats du calcul precedent. Les valeurs
-possibles sont : - SERAFIN : format standard simple precision pour
-Telemac; - SERAFIND: format standard double precision pour Telemac; -
-MED : format MED base sur HDF5""",
- ang = """ Previous computation results file format. Possible values are: -
-SERAFIN : classical single precision format in Telemac; - SERAFIND:
-classical double precision format in Telemac; - MED : MED format based
-on HDF5""",
+ into = ['SERAFIN','SERAFIND','MED'],
+ defaut = 'SERAFIN',
+ fr = """Format du fichier de resultats du calcul precedent.
+Les valeurs possibles sont :
+- SERAFIN : format standard simple precision pour Telemac;
+- SERAFIND: format standard double precision pour Telemac;
+- MED : format MED base sur HDF5""",
+ ang = """Previous computation results file format.
+Possible values are:
+- SERAFIN : classical single precision format in Telemac;
+- SERAFIND: classical double precision format in Telemac;
+- MED : MED format based on HDF5""",
),
# -----------------------------------
PREVIOUS_COMPUTATION_FILE = SIMP(statut ='o',
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = '',
- fr = """ Nom d''un fichier contenant les resultats d''un calcul precedent
-realise sur le meme maillage et dont le dernier pas de temps enregistre
-va fournir les conditions initiales pour une suite de de calcul.""",
- ang = """ Name of a file containing the results of an earlier computation which
-was made on the same mesh. The last recorded time step will provid the
-initial conditions for the new computation.""",
+ fr = """Nom d''un fichier contenant les resultats d''un calcul
+precedent realise sur le meme maillage et dont le dernier pas de temps
+enregistre va fournir les conditions initiales pour une suite de de
+calcul.""",
+ ang = """Name of a file containing the results of an earlier
+computation which was made on the same mesh. The last recorded time
+step will provid the initial conditions for the new computation.""",
),
# -----------------------------------
RECORD_NUMBER_FOR_RESTART = SIMP(statut ='o',
# -----------------------------------
typ = 'I',
defaut = 0,
- fr = """ En cas de suite de calcul, numero de l''enregistrement de depart dans
-le fichier du calcul precedent. 0 signifie qu''on prend le dernier
-enregistrement""",
- ang = """ In case of COMPUTATION CONTINUED, record number to start from in the
-PREVIOUS COMPUTATION FILE""",
+ fr = """En cas de suite de calcul, numero de l''enregistrement
+de depart dans le fichier du calcul precedent. 0 signifie
+qu''on prend le dernier enregistrement""",
+ ang = """In case of COMPUTATION CONTINUED, record number to
+start from in the PREVIOUS COMPUTATION FILE""",
),
),
# -----------------------------------
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Remet le temps a zero en cas de suite de calcul""",
- ang = """ Initial time set to zero in case of restart""",
+ fr = """Remet le temps a zero en cas de suite de calcul""",
+ ang = """Initial time set to zero in case of restart""",
),
),
# -----------------------------------
# -----------------------------------
typ = 'I',
defaut = 0,
- fr = """ Determine le nombre de pas de temps a partir duquel debute l''ecriture
-des resultats dans le FICHIER DES RESULTATS.""",
- ang = """ Determines the number of time steps after which the results are first
-written into the RESULTS FILE.""",
+ fr = """Determine le nombre de pas de temps a partir duquel debute
+l''ecriture des resultats dans le FICHIER DES RESULTATS.""",
+ ang = """Determines the number of time steps after which the results
+are first written into the RESULTS FILE.""",
),
# -----------------------------------
GRAPHIC_PRINTOUT_PERIOD = SIMP(statut ='o',
# -----------------------------------
typ = 'I',
defaut = 0,
- fr = """ Nombre de tableaux mis a disposition de l utilisateur""",
- ang = """ Number of arrays for own user programming""",
+ fr = """Nombre de tableaux mis a disposition de l utilisateur""",
+ ang = """Number of arrays for own user programming""",
),
# -----------------------------------
NAMES_OF_PRIVATE_VARIABLES = SIMP(statut ='f',
# -----------------------------------
typ = 'TXM', min=0, max='**',
- fr = """ Noms des variables privees en 32 caracteres, 16 pour le nom 16 pour
-l''unite. Elles correspondent au bloc PRIVE et peuvent etre lues dans le
-fichier de geometrie si elles y sont presentes avec leur nom""",
- ang = """ Name of private variables in 32 characters, 16 for the name, 16 for
-the unit. They are stored in the block PRIVE and can be read in the
-geometry file if they are here with their name""",
+ fr = """Noms des variables privees en 32 caracteres, 16 pour le nom
+ 16 pour l''unite. Elles correspondent au bloc PRIVE
+ et peuvent etre lues dans le fichier de geometrie si elles
+ y sont presentes avec leur nom""",
+ ang = """Name of private variables in 32 characters, 16 for the name,
+ 16 for the unit. They are stored in the block PRIVE and
+ can be read in the geometry file if they are here with their
+ name""",
),
# -----------------------------------
RESULTS_FILE_FORMAT = SIMP(statut ='o',
# -----------------------------------
typ = 'TXM',
- into = ['SERAFIN?','SERAFIND','MED'],
- defaut = 'SERAFIN?',
- fr = """ Format du fichier de resultats. Les valeurs possibles sont : - SERAFIN
-: format standard simple precision pour Telemac; - SERAFIND: format
-standard double precision pour Telemac; - MED : format MED base sur
-HDF5""",
- ang = """ Results file format. Possible values are: - SERAFIN : classical single
-precision format in Telemac; - SERAFIND: classical double precision
-format in Telemac; - MED : MED format based on HDF5""",
+ into = ['SERAFIN','SERAFIND','MED'],
+ defaut = 'SERAFIN',
+ fr = """Format du fichier de resultats.
+Les valeurs possibles sont :
+- SERAFIN : format standard simple precision pour Telemac;
+- SERAFIND: format standard double precision pour Telemac;
+- MED : format MED base sur HDF5""",
+ ang = """Results file format. Possible values are:
+- SERAFIN : classical single precision format in Telemac;
+- SERAFIND: classical double precision format in Telemac;
+- MED : MED format based on HDF5""",
),
# -----------------------------------
RESULTS_FILE = SIMP(statut ='o',
# -----------------------------------
typ = ('Fichier','All Files (*)','Sauvegarde'),
defaut = '',
- fr = """ Nom du fichier dans lequel seront ecrits les resultats du calcul avec
-la periodicite donnee par le mot cle PERIODE POUR LES SORTIES
-GRAPHIQUES.""",
- ang = """ Name of the file into which the computation results shall be written,
-the periodicity being given by the key-word: GRAPHIC PRINTOUT PERIOD.""",
+ fr = """Nom du fichier dans lequel seront ecrits les resultats du
+calcul avec la periodicite donnee par le mot cle ''PERIODE POUR LES
+SORTIES GRAPHIQUES''.""",
+ ang = """Name of the file into which the computation results shall be
+written,
+the periodicity being given by the key-word:
+GRAPHIC PRINTOUT PERIOD.""",
),
# -----------------------------------
BINARY_RESULTS_FILE_FORMAT = SIMP(statut ='f',
typ = 'TXM',
into = ['BIN','SERAFIN','SERAFIND','MED'],
defaut = 'BIN',
- fr = """ Format du fichier de resultats binaire. Les valeurs possibles sont : -
-SERAFIN : format standard simple precision pour Telemac; - SERAFIND:
-format standard double precision pour Telemac; - MED : format MED base
-sur HDF5""",
- ang = """ Binary results file format. Possible values are: - SERAFIN : classical
-single precision format in Telemac; - SERAFIND: classical double
-precision format in Telemac; - MED : MED format based on HDF5""",
+ fr = """Format du fichier de geometrie.
+Les valeurs possibles sont :
+- SERAFIN : format standard simple precision pour Telemac;
+- SERAFIND: format standard double precision pour Telemac;
+- MED : format MED base sur HDF5""",
+ ang = """Geometry file format.
+Possible values are:
+- SERAFIN : classical single precision format in Telemac;
+- SERAFIND: classical double precision format in Telemac;
+- MED : MED format based on HDF5""",
),
# -----------------------------------
BINARY_RESULTS_FILE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)','Sauvegarde'),
defaut = '',
- fr = """ Fichier de resultats code en binaire mis a la disposition de
-l''utilisateur. Les resultats a placer dans ce fichier seront a ecrire
-sur le canal 28.""",
- ang = """ Additional binary-coded result file made available to the user. The
-results to be entered into this file shall be written on channel 28.""",
+ fr = """Fichier de resultats code en binaire mis a la disposition
+de l''utilisateur. Les resultats a placer dans ce fichier seront a
+ecrire sur le canal 28.""",
+ ang = """Additional binary-coded result file made available
+to the user. The results to be entered into this file shall be written
+on channel 28.""",
),
# -----------------------------------
FORMATTED_RESULTS_FILE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)','Sauvegarde'),
defaut = '',
- fr = """ Fichier de resultats formate mis a la disposition de l''utilisateur.
-Les resultats a placer dans ce fichier seront a ecrire sur le canal 29.""",
- ang = """ Formatted file of results made available to the user. The results to
-be entered into this file shall be written on channel 29.""",
+ fr = """Fichier de resultats formate mis a la disposition de
+l''utilisateur.
+Les resultats a placer dans ce fichier seront a ecrire sur
+le canal 29.""",
+ ang = """Formatted file of results made available to the user.
+The results to be entered into this file shall be written
+on channel 29.""",
),
),
# -----------------------------------
CONTROL_SECTIONS = SIMP(statut ='f',
# -----------------------------------
typ = 'I', min=0, max='**',
- fr = """ Couples de points (numeros globaux dans le maillage) entre lesquels
-les debits instantanes et cumules seront donnes.""",
- ang = """ Couples of points (global numbers in the mesh) defining sections where
-the instantaneous and cumulated discharges will be given""",
+ fr = """Couples de points (numeros globaux dans le maillage) entre
+lesquels les debits instantanes et cumules seront donnes.""",
+ ang = """Couples of points (global numbers
+in the mesh) defining sections
+ where the instantaneous and cumulated discharges will be given""",
),
# -----------------------------------
PRINTING_CUMULATED_FLOWRATES = SIMP(statut ='o',
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ IMPRESSION DU FLUX CUMULE A TRAVERS LES SECTIONS DE CONTROLE""",
- ang = """ PRINTING THE CUMULATED FLOWRATES THROUGH CONTROL SECTIONS""",
+ fr = """IMPRESSION DU FLUX CUMULE A TRAVERS LES SECTIONS DE CONTROLE""",
+ ang = """PRINTING THE CUMULATED FLOWRATES THROUGH CONTROL SECTIONS""",
),
# -----------------------------------
COMPATIBLE_COMPUTATION_OF_FLUXES = SIMP(statut ='o',
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ FLUX A TRAVERS LES SECTIONS DE CONTROLE, CALCUL COMPATIBLE AVEC
-L''IMPERMEABILITE SOUS FORME FAIBLE""",
- ang = """ FLOWRATES THROUGH CONTROL SECTIONS, COMPUTATION COMPATIBLE WITH THE
-WEAK FORMULATION OF NO-FLUX BOUNDARY CONDITION""",
+ fr = """FLUX A TRAVERS LES SECTIONS DE CONTROLE, CALCUL COMPATIBLE
+AVEC L''IMPERMEABILITE SOUS FORME FAIBLE""",
+ ang = """FLOWRATES THROUGH CONTROL SECTIONS, COMPUTATION COMPATIBLE
+WITH THE WEAK FORMULATION OF NO-FLUX BOUNDARY CONDITION""",
),
# -----------------------------------
SECTIONS_INPUT_FILE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = '',
- fr = """ sections input file, partitioned""",
- ang = """ sections input file, partitioned""",
+ fr = """sections input file, partitioned""",
+ ang = """sections input file, partitioned""",
),
# -----------------------------------
SECTIONS_OUTPUT_FILE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)','Sauvegarde'),
defaut = '',
- fr = """ sections output file, written by the master""",
- ang = """ sections output file, written by the master""",
+ fr = """sections output file, written by the master""",
+ ang = """sections output file, written by the master""",
),
# -----------------------------------
FLUXLINE = SIMP(statut ='f',
# -----------------------------------
typ = 'I',
defaut = 0,
- fr = """ Determine le nombre de pas de temps a partir duquel debute l''ecriture
-des resultats dans le listing.""",
- ang = """ Determines the number of time steps after which the results are first
-written into the listing.""",
+ fr = """Determine le nombre de pas de temps a partir duquel debute
+l''ecriture des resultats dans le listing.""",
+ ang = """Determines the number of time steps after which the results
+are first written into the listing.""",
),
# -----------------------------------
LISTING_PRINTOUT_PERIOD = SIMP(statut ='o',
# -----------------------------------
typ = 'I',
defaut = 1,
- fr = """ Determine la periode en nombre de pas de temps d''impression des
-VARIABLES A IMPRIMER (voir ce mot-cle) Pour la mise au point, il faut
-savoir que la sortie des resultats est effectuee systematiquement sur le
-fichier de retour d''execution du code (actuellement accessible par le
-menu 3.f de SPF sur IBM, et dans le fichier !CAS.SORTIE sur station de
-travail)""",
- ang = """ Determines, in number of time steps, the printout period of the
-VARIABLES TO BE PRINTED The results are systematically printed out on
-the listing file (file CAS.SORTIE at the workstation).""",
+ fr = """Determine la periode en nombre de pas de temps d''impression
+des VARIABLES A IMPRIMER (voir ce mot-cle) Pour la mise au point,
+il faut savoir que la sortie des resultats est effectuee
+systematiquement sur le fichier de retour d''execution du code
+(actuellement accessible par le menu 3.f de SPF sur IBM, et dans
+le fichier !CAS.SORTIE sur station de travail)""",
+ ang = """Determines, in number of time steps, the printout period of
+the VARIABLES TO BE PRINTED
+The results are systematically printed out on the listing file
+(file CAS.SORTIE at the workstation).""",
),
# -----------------------------------
LISTING_PRINTOUT = SIMP(statut ='o',
# -----------------------------------
typ = bool,
defaut = True,
- fr = """ Sortie des resultats sur support papier. Si l''on met NON le listing
-ne contient que l''entete et la mention FIN NORMALE DU PROGRAMME
+ fr = """Sortie des resultats sur support papier.
+Si l''on met NON le listing ne contient que l''entete et la mention
+FIN NORMALE DU PROGRAMME
Commande a eviter""",
- ang = """ Result printout on hard copy. When NO is selected, the listing only
-includes the heading and the phrase "NORMAL END OF PROGRAM" In addition,
-the options MASS BALANCE and VALIDATION are inhibited. Not recommended
-for use.""",
+ ang = """Result printout on hard copy.
+When NO is selected, the listing only includes the heading and the
+phrase "NORMAL END OF PROGRAM"
+In addition, the options MASS BALANCE and VALIDATION are inhibited.
+Not recommended for use.""",
),
# -----------------------------------
VARIABLES_TO_BE_PRINTED = SIMP(statut ='f',
# -----------------------------------
typ = 'TXM', min=0, max='**',
intoSug = ["velocity along x axis (m/s)","velocity along y axis (m/s)","wave celerity (m/s)","water depth (m)","free surface elevation (m)","bottom elevation (m)","Froude number","scalar flowrate of fluid (m2/s)","tracer 1, etc.","turbulent kinetic energy in k-epsilon model (J/kg)","dissipation of turbulent energy (W/kg)","turbulent viscosity of k-epsilon model (m2/s)","flowrate along x axis (m2/s)","flowrate along y axis (m2/s)","scalar velocity (m/s)","wind along x axis (m/s)","wind along y axis (m/s)","air pressure (Pa)","friction coefficient","drift along x (m)","drift along y (m)","nombre de courants ","supplementary variable N","supplementary variable O","supplementary variable R","supplementary variable Z","gradient 1, etc."],
- defaut = [''],
+ defaut = '',
fr = """Nom des variables que l''utilisateur desire ecrire a l''ecran. Meme
possibilites que pour les sorties graphiques.""",
ang = """Name of the variables that the user wants printed on screen.
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Determine si l''on effectue ou non le bilan de masse sur le domaine.
-Cette procedure calcule a chaque pas de temps : - les flux aux entrees
-et sorties du domaine; - le flux global a travers l''ensemble des parois
-du domaine (liquides ou solides) - l''erreur relative sur la masse pour
-ce pas de temps. En fin de listing, on trouve l''erreur relative sur la
-masse pour l''ensemble du calcul. Il ne s''agit que d''un calcul
-indicatif car il n''existe pas d''expression compatible du debit en
-formulation c,u,v.""",
- ang = """ Determines whether a check of the mass-balance over the domain is
-mader or not. This procedures computes the following at each time step:
-the domain inflows and outflows, the overall flow across all the
-boundaries, the relative error in the mass for that time step. The
-relative error in the mass over the whole computation can be found at
-the end of the listing.""",
+ fr = """Determine si l''on effectue ou non le bilan de masse
+sur le domaine.
+Cette procedure calcule a chaque pas de temps :
+ - les flux aux entrees et sorties du domaine;
+ - le flux global a travers l''ensemble des parois du domaine (liquides
+ou solides)
+- l''erreur relative sur la masse pour ce pas de temps.
+En fin de listing, on trouve l''erreur relative sur la masse pour
+l''ensemble du calcul.
+Il ne s''agit que d''un calcul indicatif car il n''existe pas
+d''expression compatible du debit en formulation c,u,v.""",
+ ang = """Determines whether a check of the mass-balance over
+the domain is mader or not.
+This procedures computes the following at each time step:
+the domain inflows and outflows,
+the overall flow across all the boundaries,
+the relative error in the mass for that time step.
+The relative error in the mass over the whole computation can be found
+at the end of the listing.""",
),
# -----------------------------------
INFORMATION_ABOUT_SOLVER = SIMP(statut ='f',
# -----------------------------------
typ = bool,
defaut = True,
- fr = """ Donne a chaque pas de temps le nombre d''iterations necessaires a la
-convergence du solveur de l''etape de propagation.""",
- ang = """ if YES, prints the number of iterations that have been necessar to get
-the solution of the linear system.""",
+ fr = """Donne a chaque pas de temps le nombre d''iterations necessaires
+a la convergence du solveur de l''etape de propagation.""",
+ ang = """if YES, prints the number of iterations
+that have been necessar
+to get the solution of the linear system.""",
),
# -----------------------------------
LIST_OF_POINTS = SIMP(statut ='f',
# -----------------------------------
typ = 'I', min=0, max='**',
- fr = """ Liste de points remarquables pour les impressions""",
- ang = """ List of remarkable points for printouts""",
+ fr = """Liste de points remarquables pour les impressions""",
+ ang = """List of remarkable points for printouts""",
),
# -----------------------------------
NAMES_OF_POINTS = SIMP(statut ='f',
# -----------------------------------
typ = 'TXM', min=0, max='**',
- fr = """ Noms des points remarquables pour les impressions""",
- ang = """ Names of remarkable points for printouts""",
+ fr = """Noms des points remarquables pour les impressions""",
+ ang = """Names of remarkable points for printouts""",
),
),
# -----------------------------------
FOURIER_ANALYSIS_PERIODS = SIMP(statut ='o',
# -----------------------------------
typ = 'R', min=0, max='**',
- fr = """ Liste des periodes que l''on veut analyser""",
- ang = """ List of periods to be analysed""",
+ fr = """Liste des periodes que l''on veut analyser""",
+ ang = """List of periods to be analysed""",
),
# -----------------------------------
TIME_RANGE_FOR_FOURIER_ANALYSIS = SIMP(statut ='o',
# -----------------------------------
typ = 'R', min= 2, max= 2,
defaut = [0.,0.],
- fr = """ Pour le calcul du marnage et de la phase de la maree""",
- ang = """ For computing tidal range and phase of tide""",
+ fr = """Pour le calcul du marnage et de la phase de la maree""",
+ ang = """For computing tidal range and phase of tide""",
),
),
),
PRESCRIBED_ELEVATIONS = SIMP(statut ='f',
# -----------------------------------
typ = 'R', max='**',
- defaut = [0.0,0.0],
- fr = """ Valeurs des cotes imposees aux frontieres liquides entrantes. Lire la
-partie du mode d''emploi consacree aux conditions aux limites""",
- ang = """ Values of prescribed elevations at the inflow boundaries. The section
-about boundary conditions is to be read in the manual""",
+ fr = """Valeurs des cotes imposees aux frontieres liquides entrantes.
+Lire la partie du mode d''emploi consacree aux conditions aux limites""",
+ ang = """Values of prescribed elevations at the inflow boundaries.
+The section about boundary conditions is to be read in the manual""",
),
# -----------------------------------
PRESCRIBED_FLOWRATES = SIMP(statut ='f',
# -----------------------------------
typ = 'R', max='**',
- defaut = [0.0,0.0],
- fr = """ Valeurs des debits imposes aux frontieres liquides entrantes. Lire la
-partie du mode d''emploi consacree aux conditions aux limites""",
- ang = """ Values of prescribed flowrates at the inflow boundaries. The section
-about boundary conditions is to be read in the manual""",
+ fr = """Valeurs des debits imposes aux frontieres liquides entrantes.
+Lire la partie du mode d''emploi consacree aux conditions aux limites""",
+ ang = """Values of prescribed flowrates at the inflow boundaries.
+The section about boundary conditions is to be read in the manual""",
),
# -----------------------------------
PRESCRIBED_VELOCITIES = SIMP(statut ='f',
# -----------------------------------
typ = 'R', max='**',
- defaut = [0.0,0.0],
- fr = """ Valeurs des vitesses imposees aux frontieres liquides entrantes. Lire
-la partie du mode d''emploi consacree aux conditions aux limites""",
- ang = """ Values of prescribed velocities at the liquid inflow boundaries. Refer
-to the section dealing with the boundary conditions""",
+ fr = """Valeurs des vitesses imposees aux frontieres liquides entrantes.
+ Lire la partie du mode d''emploi consacree aux conditions aux limites""",
+ ang = """Values of prescribed velocities at the liquid inflow boundaries.
+ Refer to the section dealing with the boundary conditions""",
),
),
# -----------------------------------
# -----------------------------------
typ = 'TXM', max='**',
into = ["no","Z(Q)","Q(Z) not programmed"],
- fr = """ Indique si une courbe de tarage doit etre utilisee pour une frontiere
+ fr = """Indique si une courbe de tarage doit etre utilisee pour une frontiere
0:non 1:Z(Q) 2: Q(Z) (2 non programme)""",
- ang = """ Says if a discharge-elevation curve must be used for a given boundary
-:NO 1:Z(Q) 2: Q(Z) (2 not programmed)""",
+ ang = """Says if a discharge-elevation curve must be used for a given boundary
+0:NO 1:Z(Q) 2: Q(Z) (2 not programmed)""",
),
# -----------------------------------
b_STAGE_DISCHARGE_CURVESG = BLOC(condition="STAGE_DISCHARGE_CURVES != 'no'",
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = '',
- fr = """ Nom du fichier contenant les courbes de tarage""",
- ang = """ Name of the file containing stage-discharge curves""",
+ fr = """Nom du fichier contenant les courbes de tarage""",
+ ang = """Name of the file containing stage-discharge curves""",
),
),
# -----------------------------------
# -----------------------------------
typ = 'TXM', min=0, max='**',
into = ["constant normal profile","u and v given in the conlim file","normal velocity given in ubor in the conlim file","velocity proportional to square root of depth","velocity proportional to square root of depth, variant"],
- fr = """ 1:profil normal constant 2:u et v donnes dans le fichier conlim
-3:vitesse normale donnee dans ubor dans le fichier conlim 4:profil en
-racine de la profondeur 5:profil en racine de la profondeur, variante""",
- ang = """ 1:constant normal profile 2:u and v given in the conlim file 3:normal
-velocity given in ubor in the conlim file 4:sqrt(depth) profile
-5:sqrt(depth) profile, variant""",
+ fr = """1:profil normal constant 2:u et v
+donnes dans le fichier conlim
+ 3:vitesse normale donnee dans ubor dans le fichier conlim
+ 4:profil en racine de la profondeur
+ 5:profil en racine de la profondeur, variante""",
+ ang = """1:constant normal profile 2:u and v given in the conlim file
+ 3:normal velocity given in ubor in the conlim file
+ 4:sqrt(depth) profile
+ 5:sqrt(depth) profile, variant""",
),
# -----------------------------------
OPTION_FOR_LIQUID_BOUNDARIES = SIMP(statut ='f',
# -----------------------------------
typ = 'TXM', max='**',
into = ["classical","Thompson method based on characteristics"],
- fr = """ On donne 1 entier par frontiere liquide 1 : conditions aux limites
-classiques 2 : methode de Thompson avec calcul de caracteristiques""",
- ang = """ One integer per liquid boundary is given 1 : classical boundary
-conditions 2 : Thompson method based on characteristics""",
+ fr = """On donne 1 entier par frontiere liquide
+ 1 : conditions aux limites classiques
+ 2 : methode de Thompson avec calcul de caracteristiques""",
+ ang = """One integer per liquid boundary is given
+ 1 : classical boundary conditions
+ 2 : Thompson method based on characteristics""",
),
# -----------------------------------
LIQUID_BOUNDARIES_FILE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = '',
- fr = """ Fichier de variations en temps des conditions aux limites. Les donnees
-de ce fichier seront a lire sur le canal 12.""",
- ang = """ Variations in time of boundary conditions. Data of this file are read
+ fr = """Fichier de variations en temps des conditions aux limites.
+Les donnees de ce fichier seront a lire sur le canal 12.""",
+ ang = """Variations in time of boundary conditions.
+Data of this file are read
on channel 12.""",
),
# -----------------------------------
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ SI OUI REMPLIR LE SOUS-PROGRAMME MASKOB""",
- ang = """ IF YES REWRITE SUBROUTINE MASKOB""",
+ fr = """SI OUI REMPLIR LE SOUS-PROGRAMME MASKOB""",
+ ang = """IF YES REWRITE SUBROUTINE MASKOB""",
),
# -----------------------------------
b_ELEMENTS_MASKED_BY_USERG = BLOC(condition="ELEMENTS_MASKED_BY_USER == True",
# -----------------------------------
typ = 'I',
defaut = 10,
- fr = """ nombre maximal de zones pouvant etre definies pour le frottement. Peut
-etre augmente si necessaire""",
- ang = """ maximal number of zones defined for the friction. Could be increased
-if needed""",
+ fr = """nombre maximal de zones pouvant etre definies pour le
+frottement. Peut etre augmente si necessaire""",
+ ang = """maximal number of zones defined for the friction.
+Could be increased if needed""",
),
# -----------------------------------
FRICTION_DATA = SIMP(statut ='f',
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Lois de frottements definies par zone""",
- ang = """ Friction law defined by area""",
+ fr = """Lois de frottements definies par zone""",
+ ang = """Friction law defined by area""",
),
# -----------------------------------
FRICTION_DATA_FILE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = '',
- fr = """ fichier de donnees pour le frottement""",
- ang = """ friction data file""",
+ fr = """fichier de donnees pour le frottement""",
+ ang = """friction data file""",
),
# -----------------------------------
LAW_OF_BOTTOM_FRICTION = SIMP(statut ='o',
# -----------------------------------
typ = 'R',
defaut = 50.,
- fr = """ Fixe la valeur du coefficient de frottement pour la formulation
-choisie. Attention; la signification de ce chiffre varie suivant la
-formule choisie : 1 : coefficient lineaire 2 : coefficient de Chezy 3 :
-coefficient de Strickler 4 : coefficient de Manning 5 : hauteur de
-rugosite de Nikuradse""",
- ang = """ Sets the value of the friction coefficient for the selected
+ fr = """Fixe la valeur du coefficient de frottement pour la
+formulation choisie.
+Attention; la signification de ce chiffre varie suivant la formule
+choisie :
+ 1 : coefficient lineaire
+ 2 : coefficient de Chezy
+ 3 : coefficient de Strickler
+ 4 : coefficient de Manning
+ 5 : hauteur de rugosite de Nikuradse""",
+ ang = """Sets the value of the friction coefficient for the selected
formulation. It is noteworthy that the meaning of this figure changes
-according to the selected formula (Chezy, Strickler, etc.) : 1 : linear
-coefficient 2 : Chezy coefficient 3 : Strickler coefficient 4 : Manning
-coefficient 5 : Nikuradse grain size""",
+according to the selected formula (Chezy, Strickler, etc.) :
+ 1 : linear coefficient
+ 2 : Chezy coefficient
+ 3 : Strickler coefficient
+ 4 : Manning coefficient
+ 5 : Nikuradse grain size""",
),
),
# -----------------------------------
# -----------------------------------
typ = 'R',
defaut = 0.02,
- fr = """ valeur par defaut du manning pour la loi de frottement de
+ fr = """valeur par defaut du manning pour la loi de frottement de
Colebrook-White (loi numero 7)""",
- ang = """ Manning default value for the friction law of Colebrook-White (law
-number 7)""",
+ ang = """Manning default value for the friction law of Colebrook-White
+(law number 7)""",
),
# -----------------------------------
DEPTH_IN_FRICTION_TERMS = SIMP(statut ='o',
typ = 'TXM',
into = ["nodal","average"],
defaut = "nodal",
- fr = """ 1 : nodale 2 : moyenne""",
- ang = """ 1: nodal 2: average""",
+ fr = """1 : nodale 2 : moyenne""",
+ ang = """1: nodal 2: average""",
),
# -----------------------------------
NON_SUBMERGED_VEGETATION_FRICTION = SIMP(statut ='o',
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ calcul du frottement du a la vegetation non submergee""",
- ang = """ friction calculation of the non-submerged vegetation""",
+ fr = """calcul du frottement du a la vegetation non submergee""",
+ ang = """friction calculation of the non-submerged vegetation""",
),
# -----------------------------------
b_NON_SUBMERGED_VEGETATION_FRICTIONG = BLOC(condition="NON_SUBMERGED_VEGETATION_FRICTION == True",
# -----------------------------------
typ = 'R',
defaut = 0.006,
- fr = """ diametre des elements de frottements""",
- ang = """ diameter of roughness element""",
+ fr = """diametre des elements de frottements""",
+ ang = """diameter of roughness element""",
),
# -----------------------------------
SPACING_OF_ROUGHNESS_ELEMENTS = SIMP(statut ='o',
# -----------------------------------
typ = 'R',
defaut = 0.14,
- fr = """ espacement des elements de frottement""",
- ang = """ spacing of rouhness element""",
+ fr = """espacement des elements de frottement""",
+ ang = """spacing of rouhness element""",
),
),
# -----------------------------------
typ = 'TXM',
into = ["NO FRICTION","HAALAND","CHEZY","STRICKLER","MANNING","NIKURADSE","LOG LAW","COLEBROOK-WHITE"],
defaut = "NO FRICTION",
- fr = """ selectionne le type de formulation utilisee pour le calcul du
-frottement sur les parois laterales. Les lois possibles sont les
-suivantes (cf. Note de principe) : 0 : pas de frottement 1 : lineaire 2
-: Chezy 3 : Strickler 4 : Manning 5 : formule de NIKURADSE 6 : loi en
-log 7 : Colebrook-White""",
- ang = """ Selects the type of formulation used for the friction on lateral
-boundaries. The possible laws are as follows (refer to the Principle
-note): 0: no friction 1: linear 2: Chezy 3: Strickler 4: Manning 5:
-NIKURADSE''s formula 6 : law log 7 : Colebrook-White""",
+ fr = """selectionne le type de formulation utilisee pour le calcul
+du frottement sur les parois laterales.
+Les lois possibles sont les suivantes (cf. Note de principe) :
+0 : pas de frottement
+1 : lineaire
+2 : Chezy
+3 : Strickler
+4 : Manning
+5 : formule de NIKURADSE
+6 : loi en log
+7 : Colebrook-White""",
+ ang = """Selects the type of formulation used
+for the friction on lateral boundaries.
+The possible laws are as follows (refer to the Principle note):
+0: no friction
+1: linear
+2: Chezy
+3: Strickler
+4: Manning
+5: NIKURADSE''s formula
+6 : law log
+7 : Colebrook-White""",
),
# -----------------------------------
b_LAW_OF_FRICTION_ON_LATERAL_BOUNDARIESG = BLOC(condition="LAW_OF_FRICTION_ON_LATERAL_BOUNDARIES != 'NO FRICTION'",
# -----------------------------------
typ = 'R',
defaut = 100.,
- fr = """ Fixe la valeur du coefficient de frottement sur les frontieres solides
-avec un regime turbulent rugueux sur les bords du domaine. meme
-convention que pour le coefficient de frottement: 1 : non programme 2 :
-coefficient de Chezy 3 : coefficient de Strickler 4 : coefficient de
-Manning 5 : hauteur de rugosite de Nikuradse""",
- ang = """ Sets the value of the friction coefficient of the solid boundary with
-the bed roughness option. Same meaning than friction coefficient""",
+ fr = """Fixe la valeur du coefficient de frottement sur les frontieres
+solides avec un regime turbulent rugueux sur les bords du domaine.
+meme convention que pour le coefficient de frottement:
+ 1 : non programme
+ 2 : coefficient de Chezy
+ 3 : coefficient de Strickler
+ 4 : coefficient de Manning
+ 5 : hauteur de rugosite de Nikuradse""",
+ ang = """Sets the value of the friction coefficient of the solid
+boundary with the bed roughness option. Same meaning than friction
+coefficient""",
),
),
# -----------------------------------
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Declenche l''appel a def\_zones, pour donner un numero de zone a
-chaque point""",
- ang = """ Triggers the call to def\_zones to give a zone number to every point""",
+ fr = """Declenche l''appel a def\_zones, pour donner
+ un numero de zone a chaque point""",
+ ang = """Triggers the call to def\_zones to give a zone number to every point""",
),
# -----------------------------------
b_DEFINITION_OF_ZONESG = BLOC(condition="DEFINITION_OF_ZONES == True",
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = '',
- fr = """ Fichier des zones avec sur chaque ligne numero de point numero de
-zone""",
- ang = """ Zones file, with on every line: point number zone number""",
+ fr = """Fichier des zones avec sur chaque ligne
+numero de point numero de zone""",
+ ang = """Zones file, with on every line:
+point number zone number""",
),
),
# -----------------------------------
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Prise en compte ou non des effets du vent.""",
- ang = """ Determines whether the wind effects are to be taken into account or
-not.""",
+ fr = """Prise en compte ou non des effets du vent.""",
+ ang = """Determines whether the wind effects are to be taken into
+account or not.""",
),
# -----------------------------------
b_WINDG = BLOC(condition="WIND == True",
# -----------------------------------
typ = 'R',
defaut = 0.,
- fr = """ Composante de la vitesse du vent suivant l''axe des x (m/s).""",
- ang = """ Wind velocity, component along x axis (m/s).""",
+ fr = """Composante de la vitesse du vent suivant l''axe des x (m/s).""",
+ ang = """Wind velocity, component along x axis (m/s).""",
),
# -----------------------------------
WIND_VELOCITY_ALONG_Y = SIMP(statut ='o',
# -----------------------------------
typ = 'R',
defaut = 0.,
- fr = """ Composante de la vitesse du vent suivant l''axe des y (m/s).""",
- ang = """ Wind velocity, component along y axis (m/s).""",
+ fr = """Composante de la vitesse du vent suivant l''axe des y (m/s).""",
+ ang = """Wind velocity, component along y axis (m/s).""",
),
# -----------------------------------
THRESHOLD_DEPTH_FOR_WIND = SIMP(statut ='o',
# -----------------------------------
typ = 'R',
defaut = 1.,
- fr = """ Retire la force due au vent dans les petites profondeurs""",
- ang = """ Wind is not taken into account for small depths""",
+ fr = """Retire la force due au vent dans les petites profondeurs""",
+ ang = """Wind is not taken into account for small depths""",
),
# -----------------------------------
COEFFICIENT_OF_WIND_INFLUENCE = SIMP(statut ='o',
# -----------------------------------
typ = 'R',
defaut = 0.,
- fr = """ Fixe la valeur du coefficient d''entrainement du vent (cf. Note de
-principe).""",
- ang = """ Sets the value of the wind driving coefficient. Refer to principle
-note.""",
+ fr = """Fixe la valeur du coefficient d''entrainement du vent (cf.
+Note de principe).""",
+ ang = """Sets the value of the wind driving coefficient.
+Refer to principle note.""",
),
# -----------------------------------
OPTION_FOR_WIND = SIMP(statut ='o',
typ = 'TXM',
into = ["constant in time and space","variable in time given by formated file","variable in time and space given by formated file"],
defaut = "constant in time and space",
- fr = """ donne les options pour introduire le vent:
-1: constant en temps et en espace (donne par le mot cle VITESSE ET
-DIRECTION DU VENT)
-2: variable en temps donne par fichier formate
-3: variable en temps et en espace donne par fichier formate""",
- ang = """ gives option for managing the wind:
-1: constant in time and space, given by keyword SPEED AND DIRECTION OF
-WIND
-2: variable in time and (constant in space), given by formated file
-3: variable in time and space""",
+ fr = """donne les options pour introduire le vent:
+ 1: constant en temps et en espace (donne par le mot cle
+ VITESSE ET DIRECTION DU VENT)
+ 2: variable en temps donne par fichier formate
+ 3: variable en temps et en espace donne par fichier formate
+ ou un fichier binaire serafin""",
+ ang = """gives option for managing the wind:
+ 1: constant in time and space, given by keyword SPEED AND
+ DIRECTION OF WIND
+ 2: variable in time and (constant in space), given by formated file
+ 3: variable in time and space , given by formated file or by
+ a binary serafin file""",
),
# -----------------------------------
b_OPTION_FOR_WINDG = BLOC(condition="OPTION_FOR_WIND == 'constant in time and space'",
# -----------------------------------
typ = 'R', min= 2, max= 2,
defaut = [0.,0.],
- fr = """ Donne la vitesse et la direction (en degres de 0 a 360, 0 etant y=0 et
-x=+inf) du vent lorsqu ils sont consant en temps et en espace (mot cle
-OPTION DU VENT = 1)""",
- ang = """ gives the speed and direction (degre (from 0 to 360), 0 given y=0 anx
-x=+infinity) when they are constant in time and space (keyword OPTION
-FOR WIND = 1)""",
+ fr = """Donne la vitesse et la direction (en degres de 0 a 360,
+0 etant y=0 et x=+inf) du vent lorsqu ils sont consant en temps et
+en espace (mot cle OPTION DU VENT = 1)""",
+ ang = """gives the speed and direction (degre (from 0 to 360),
+0 given y=0 anx x=+infinity) when they are constant in time and space
+(keyword OPTION FOR WIND = 1)""",
),
),
# -----------------------------------
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Permet de decider si l''on prend ou non en compte l''influence d''un
-champ de pression.""",
- ang = """ Provided to decide whether the influence of an atmosphere field is
-taken into account or not.""",
+ fr = """Permet de decider si l''on prend ou non en compte l''influence
+d''un champ de pression.""",
+ ang = """Provided to decide whether the influence of
+an atmosphere field
+is taken into account or not.""",
),
# -----------------------------------
b_AIR_PRESSUREG = BLOC(condition="AIR_PRESSURE == True",
# -----------------------------------
typ = 'R',
defaut = 100000.,
- fr = """ donne la valeur de la pression atmospherique lorsquelle est constante
-en temps et en espace""",
- ang = """ gives the value of atmospheric pressure when it is contant in time and
-space""",
+ fr = """donne la valeur de la pression atmospherique lorsquelle est
+constante en temps et en espace""",
+ ang = """gives the value of atmospheric pressure when it is contant
+in time and space""",
),
),
# -----------------------------------
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Pour ajouter un apport ou une perte d''eau en surface. Voir le mot-cle
-PLUIE OU EVAPORATION EN MM PAR JOUR""",
- ang = """ to add or remove water at the free surface. See the key-word RAIN OR
-EVAPORATION IN MM PER DAY""",
+ fr = """Pour ajouter un apport ou une perte d''eau en surface.
+Voir le mot-cle PLUIE OU EVAPORATION EN MM PAR JOUR""",
+ ang = """to add or remove water at the free surface. See the key-word
+RAIN OR EVAPORATION IN MM PER DAY""",
),
# -----------------------------------
b_RAIN_OR_EVAPORATIONG = BLOC(condition="RAIN_OR_EVAPORATION == True",
# -----------------------------------
typ = 'R',
defaut = 0.0,
- fr = """ Pour ajouter un apport ou une perte d''eau en surface""",
- ang = """ to add or remove water at the free surface""",
+ fr = """Pour ajouter un apport ou une perte d''eau en surface""",
+ ang = """to add or remove water at the free surface""",
),
),
# -----------------------------------
1 : dry antecedent conditions
2 : normal antecedent conditions
3 : wet antecedent conditions
-this keyword is only usefull for runoff model 1 (SCS CN model)""",
+This keyword is only usefull for runoff model 1 (SCS CN model)""",
),
# -----------------------------------
DURATION_OF_RAIN_OR_EVAPORATION_IN_HOURS = SIMP(statut ='f',
BINARY_ATMOSPHERIC_DATA_FILE_FORMAT = SIMP(statut ='f',
# -----------------------------------
typ = 'TXM',
- into = ['SERAFIN?','SERAFIND','MED'],
- defaut = 'SERAFIN?',
+ into = ['SERAFIN','SERAFIND','MED'],
+ defaut = 'SERAFIN',
fr = """Format du fichier binaire de donn\E9es atmospheriques.
Les valeurs possibles sont :
- SERAFIN : format standard simple precision pour Telemac;
# -----------------------------------
typ = 'I',
defaut = 1,
- fr = """ Donne le ratio entre pertes initiales IA et la retention potenti
+ fr = """Donne le ratio entre pertes initiales IA et la retention potenti
maximale S pour le modele pluie-debit SCS CN. Les options disponibles so
-1 : IA/S = 0.2 (methode standard) 2 : IA/S = 0.05 (methode revisee,
-cf. Woodward, Hawkins et al. 2003. A cette option les coefficients CN
-fournis en entree sont alors automatiquement corriges, cf. manuel
-utilisateur). Ce mot cle est uniquement utile pour le modele pluie-debit
-1 (CN)""",
- ang = """ Gives the ratio for Initial Abstraction to Maximal Potential Retention
-S for the SCS CN runoff model. Available options are: 1 : IA/S = 0.2
-(standard method) 2 : IA/S = 0.05 (revised method, see Woodward, Hawkins
-et al. 2003. With this option the CN values given in input are
-automatically convers see user manual). This keyword is only useful for
-runoff model 1 (SCS CN model)""",
+ 1 : IA/S = 0.2 (methode standard)
+ 2 : IA/S = 0.05 (methode revisee, cf. Woodward, Hawkins et al. 2003. A
+ cette option les coefficients CN fournis en entree sont alors
+ automatiquement corriges, cf. manuel utilisateur).
+Ce mot cle est uniquement utile pour le modele pluie-d�bit 1 (CN)""",
+ ang = """Gives the ratio for Initial Abstraction to Maximal Potential
+Retention S for the SCS CN runoff model. Available options are:
+ 1 : IA/S = 0.2 (standard method)
+ 2 : IA/S = 0.05 (revised method, see Woodward, Hawkins et al. 2003. Wi
+ this option the CN values given in input are automatically convers
+ see user manual).
+This keyword is only useful for runoff model 1 (SCS CN model)""",
),
),
# -----------------------------------
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Active la prise en compte des courants de houle""",
- ang = """ Wave driven currents are taken into account.""",
+ fr = """Active la prise en compte des courants de houle""",
+ ang = """Wave driven currents are taken into account.""",
),
# -----------------------------------
b_WAVE_DRIVEN_CURRENTSG = BLOC(condition="WAVE_DRIVEN_CURRENTS == True",
# -----------------------------------
typ = 'I',
defaut = 1,
- fr = """ Numero d enregistrement dans le fichier des courants de houle""",
- ang = """ Record number to read in the wave driven currents file""",
+ fr = """Numero d enregistrement dans le fichier des courants de houle""",
+ ang = """Record number to read in the wave driven currents file""",
),
),
# -----------------------------------
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Active la prise en compte des interactions non-lineaires entre la
+ fr = """Active la prise en compte des interactions non-lineaires entre la
houle et les courant pour le calcul du courant de houle (cf OConnor and
Yoo, 1988, Coast Eng.12.)""",
- ang = """ Wave friction enhancement for the calculation of the wave generated
+ ang = """Wave friction enhancement for the calculation of the wave generated
longshore current (cf OConnor and Yoo, 1988, Coast Eng.12.)""",
),
),
typ = 'TXM',
into = ['','FRICTION','FRICTION, STEADY'],
defaut = '',
- fr = """ Liste des parametres a estimer, choix : FROTTEMENT ou FROTTEMENT,
-PERMANENT""",
- ang = """ List of parameter to be estimated, choice : FRICTION or FRICTION,
-STEADY""",
+ fr = """Liste des parametres a estimer, choix : FROTTEMENT
+ ou FROTTEMENT, PERMANENT""",
+ ang = """List of parameter to be estimated, choice : FRICTION
+ or FRICTION, STEADY""",
),
# -----------------------------------
COST_FUNCTION = SIMP(statut ='f',
typ = 'TXM',
into = ["Computed with h,u,v","Computed with c,u,v"],
defaut = "Computed with h,u,v",
- fr = """ 1 : calculee sur h, u , v 2 : calculee avec c, u , v""",
- ang = """ 1: computed with h, u , v 2: computed with c, u , v""",
+ fr = """1 : calculee sur h, u , v 2 : calculee avec c, u , v""",
+ ang = """1: computed with h, u , v 2: computed with c, u , v""",
),
# -----------------------------------
IDENTIFICATION_METHOD = SIMP(statut ='o',
typ = 'TXM',
into = ["list of tests","gradient simple","conj gradient","Lagrange interp."],
defaut = "gradient simple",
- fr = """ 0 : plan d''experience 1 : gradient simple 2 : gradient conj. 3 :
-interp. de Lagrange""",
- ang = """ 0 : list of tests 1: gradient 2 : conj. gradient 3 : lagrange interp.""",
+ fr = """0 : plan d''experience
+1 : gradient simple
+2 : gradient conj.
+3 : interp. de Lagrange""",
+ ang = """0 : list of tests
+1: gradient
+2 : conj. gradient
+3 : lagrange interp.""",
),
# -----------------------------------
TOLERANCES_FOR_IDENTIFICATION = SIMP(statut ='o',
# -----------------------------------
typ = 'R', min= 4, max= 4,
defaut = [1.E-3,1.E-3,1.E-3,1.E-4],
- fr = """ 4 nombres : precision absolue sur H, U, V, et precision relative sur
-la fonction cout""",
- ang = """ 4 numbers: absolute precision on H, U V, and relative precision on the
-cost function""",
+ fr = """4 nombres : precision absolue sur H, U, V,
+ et precision relative sur la fonction cout""",
+ ang = """4 numbers: absolute precision on H, U V,
+ and relative precision on the cost function""",
),
# -----------------------------------
MAXIMUM_NUMBER_OF_ITERATIONS_FOR_IDENTIFICATION = SIMP(statut ='o',
# -----------------------------------
typ = 'I',
defaut = 20,
- fr = """ chaque iteration comprend au moins un calcul direct et un calcul
-adjoint""",
- ang = """ every iteration implies at least a direct and an adjoint computation""",
+ fr = """chaque iteration comprend au moins un
+ calcul direct et un calcul adjoint""",
+ ang = """every iteration implies at least a direct and
+ an adjoint computation""",
),
),
# -----------------------------------
ABSCISSAE_OF_SOURCES = SIMP(statut ='f',
# -----------------------------------
typ = 'R', min=0, max='**',
- fr = """ Valeurs des abscisses des sources de debit et de traceur.""",
- ang = """ abscissae of sources of flowrate and/or tracer""",
+ fr = """Valeurs des abscisses des sources de debit et de traceur.""",
+ ang = """abscissae of sources of flowrate and/or tracer""",
),
# -----------------------------------
ORDINATES_OF_SOURCES = SIMP(statut ='f',
# -----------------------------------
typ = 'R', min=0, max='**',
- fr = """ Valeurs des ordonnees des sources de debit et de traceur.""",
- ang = """ ordinates of sources of flowrate and/or tracer""",
+ fr = """Valeurs des ordonnees des sources de debit et de traceur.""",
+ ang = """ordinates of sources of flowrate and/or tracer""",
),
# -----------------------------------
WATER_DISCHARGE_OF_SOURCES = SIMP(statut ='f',
# -----------------------------------
typ = 'R', min=0, max='**',
- fr = """ Valeurs des debits des sources.""",
- ang = """ values of water discharge of sources""",
+ fr = """Valeurs des debits des sources.""",
+ ang = """values of water discharge of sources""",
),
# -----------------------------------
VELOCITIES_OF_THE_SOURCES_ALONG_X = SIMP(statut ='f',
# -----------------------------------
typ = 'R', min=0, max='**',
- fr = """ Vitesses du courant a chacune des sources. Si elles ne sont pas
+ fr = """Vitesses du courant a chacune des sources. Si elles ne sont pas
donnees, on considere que la vitesse est celle du courant""",
- ang = """ Velocities at the sources. If they are not given, the velocity of the
-flow at this location is taken""",
+ ang = """Velocities at the sources. If they are not given, the velocity
+of the flow at this location is taken""",
),
# -----------------------------------
VELOCITIES_OF_THE_SOURCES_ALONG_Y = SIMP(statut ='f',
# -----------------------------------
typ = 'R', min=0, max='**',
- fr = """ Vitesses du courant a chacune des sources""",
- ang = """ Velocities at the sources""",
+ fr = """Vitesses du courant a chacune des sources""",
+ ang = """Velocities at the sources""",
),
# -----------------------------------
TYPE_OF_SOURCES = SIMP(statut ='o',
typ = 'TXM',
into = ["Normal","Dirac"],
defaut = "Normal",
- fr = """ 1: Source portee par une base elements finis 2: Source portee par une
-fonction de Dirac""",
- ang = """ 1: Source term multiplied by a finite element basis 2: Source term
-multiplied by a Dirac function""",
+ fr = """1: Source portee par une base elements finis
+2: Source portee par une fonction de Dirac""",
+ ang = """1: Source term multiplied by a finite element basis
+2: Source term multiplied by a Dirac function""",
),
# -----------------------------------
SOURCES_FILE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = '',
- fr = """ Nom du fichier contenant les informations variables en temps des
-sources""",
- ang = """ Name of the file containing time-dependent information on sources""",
+ fr = """Nom du fichier contenant les informations variables
+en temps des sources""",
+ ang = """Name of the file containing time-dependent
+information on sources""",
+ ),
+# -----------------------------------
+ BLOBAL_NUMBERS_OF_SOURCE_NODES = SIMP(statut ='f',
+# -----------------------------------
+ typ = 'I', min=0, max='**',
+ fr = """ Numeros globaux des noeuds du maillage sur lequels sont affectes des
+points source""",
+ ang = """ Global numbers of nodes in the mesh that correspond to source point
+locations""",
),
),
# -----------------------------------
# -----------------------------------
typ = 'I',
defaut = 0,
- fr = """ donne le numero du processus waq (1 ou 2 ou 3 ou 4 ou 5) 0- RIEN,
-1-O2, 2-BIOMASS, 3-EUTRO 4-MICROPOL 5-THERMIC)""",
- ang = """ gives the waq process number (from 1 to 5) 0-NOTHING, 1-O2, 2-BIOMASS,
-3-EUTRO 4-MICROPOL 5-THERMIC)""",
+ fr = """donne le numero du processus waq (1 ou 2 ou 3
+ou 4 ou 5)
+0- RIEN, 1-O2, 2-BIOMASS, 3-EUTRO 4-MICROPOL 5-THERMIC)""",
+ ang = """gives the waq process number (from 1 to 5)
+0-NOTHING, 1-O2, 2-BIOMASS, 3-EUTRO 4-MICROPOL 5-THERMIC)""",
),
),
# -----------------------------------
# -----------------------------------
typ = 'R',
defaut = 1000.,
- fr = """ Fixe la valeur de la masse volumique de l''eau.""",
- ang = """ set the value of water density""",
+ fr = """Fixe la valeur de la masse volumique de l''eau.""",
+ ang = """set the value of water density""",
),
# -----------------------------------
GRAVITY_ACCELERATION = SIMP(statut ='o',
# -----------------------------------
typ = 'R',
defaut = 9.81,
- fr = """ Fixe la valeur de l''acceleration de la pesanteur.""",
- ang = """ Set the value of the acceleration due to gravity.""",
+ fr = """Fixe la valeur de l''acceleration de la pesanteur.""",
+ ang = """Set the value of the acceleration due to gravity.""",
),
# -----------------------------------
VERTICAL_STRUCTURES = SIMP(statut ='o',
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Prise en compte de la force de trainee de structures verticales (il
-faut alors remplir la subroutine DRAGFO)""",
- ang = """ drag forces from vertical structures are taken into account.
+ fr = """Prise en compte de la force de trainee de structures verticales
+(il faut alors remplir la subroutine DRAGFO)""",
+ ang = """drag forces from vertical structures are taken into account.
(subroutine DRAGFO must then be implemented)""",
),
# -----------------------------------
typ = 'TXM',
into = ['SAINT-VENANT FE','SAINT-VENANT FV','BOUSSINESQ'],
defaut = 'SAINT-VENANT FE',
- fr = """ CHOIX DES EQUATIONS A RESOUDRE : SAINT-VENANT ELEMENTS FINIS,
+ fr = """CHOIX DES EQUATIONS A RESOUDRE : SAINT-VENANT ELEMENTS FINIS,
SAINT-VENANT VOLUMES FINIS OU BOUSSINESQ 20 CARACTERES""",
- ang = """ CHOICE OF EQUATIONS TO SOLVE : SAINT-VENANT FINITE ELEMENTS,
+ ang = """CHOICE OF EQUATIONS TO SOLVE : SAINT-VENANT FINITE ELEMENTS,
SAINT-VENANT FINITE VOLUMES OR BOUSSINESQ 20 CHARACTERS""",
),
# -----------------------------------
typ = 'TXM',
into = ["Roe scheme","kinetic order 1","kinetic order 2","Zokagoa scheme order 1","Tchamen scheme order 1","HLLC scheme order 1","WAF scheme order 2"],
defaut = "kinetic order 1",
- fr = """ 0 : schema de Roe 1 : cinetique ordre 1 2 : cinetique ordre 2 3 :
-schema de Zokagoa 4 : schema de Tchamen 5 : HLLC ordre 1 6 : WAF ordre
-2""",
- ang = """ 0: Roe scheme 1: kinetic order 1 2: kinetic order 2 3 : Zokagoa scheme
-4 : Tchamen scheme 5 : HLLC order 1 6 : WAF order 2""",
+ fr = """0 : schema de Roe 1 : cinetique ordre 1 2 : cinetique ordre 2
+3 : schema de Zokagoa 4 : schema de Tchamen 5 : HLLC ordre 1
+6 : WAF ordre 2""",
+ ang = """0: Roe scheme 1: kinetic order 1 2: kinetic order 2
+3 : Zokagoa scheme 4 : Tchamen scheme 5 : HLLC order 1
+6 : WAF order 2""",
),
),
# -----------------------------------
typ = 'TXM',
into = ["coupled","Wave equation"],
defaut = "coupled",
- fr = """ 1 : Traitement couple 2 : equation d onde""",
- ang = """ 1 : Coupled 2 : wave equation""",
+ fr = """1 : Traitement couple 2 : equation d onde""",
+ ang = """1 : Coupled 2 : wave equation""",
),
),
# -----------------------------------
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Prise en compte ou non de la force de Coriolis.""",
- ang = """ The Coriolis force is taken into account or ignored.""",
+ fr = """Prise en compte ou non de la force de Coriolis.""",
+ ang = """The Coriolis force is taken into account or ignored.""",
),
# -----------------------------------
CORIOLIS_COEFFICIENT = SIMP(statut ='o',
# -----------------------------------
typ = 'R',
defaut = 0.,
- fr = """ Fixe la valeur du coefficient de la force de Coriolis. Celui-ci doit
-etre calcule en fonction de la latitude l par la formule FCOR = 2w
-sin(l) , w etant la vitesse de rotation de la terre. w = 7.2921 10-5
-rad/s Les composantes de la force de Coriolis sont alors : FU = FCOR x V
-FV = - FCOR x U""",
- ang = """ Sets the value of the Coriolis force coefficient, in cartesian
-coordinates. This coefficient, denoted FCOR in the code, should be equal
-to 2 w sin(l)d where w denotes the earth angular speed of rotation and l
-the latitude. w = 7.27 10-5 rad/sec The Coriolis force components are
-then: FU = FCOR x V, FV = -FCOR x U In spherical coordinates, the
-latitudes are known""",
+ fr = """Fixe la valeur du coefficient de la force de Coriolis.
+Celui-ci doit etre calcule en fonction de la latitude l par la formule
+ FCOR = 2w sin(l) , w etant la vitesse de rotation de la terre.
+ w = 7.2921 10-5 rad/s
+Les composantes de la force de Coriolis sont alors :
+ FU = FCOR x V
+ FV = - FCOR x U""",
+ ang = """Sets the value of the Coriolis force coefficient, in cartesian
+coordinates.
+This coefficient, denoted FCOR in the code, should be equal to
+2 w sin(l)d where w denotes the earth angular speed of rotation
+and l the latitude. w = 7.27 10-5 rad/sec
+The Coriolis force components are then:
+FU = FCOR x V,
+FV = -FCOR x U
+In spherical coordinates, the latitudes are known""",
),
),
# -----------------------------------
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Pour prendre en compte les courants secondaires""",
- ang = """ Using the parametrisation for secondary currents""",
+ fr = """Pour prendre en compte les courants secondaires""",
+ ang = """Using the parametrisation for secondary currents""",
),
# -----------------------------------
b_SECONDARY_CURRENTSG = BLOC(condition="SECONDARY_CURRENTS == True",
# -----------------------------------
typ = 'R',
defaut = 7.071,
- fr = """ Une constante dans les termes de creation de Omega""",
- ang = """ A constant in the production terms of Omega""",
+ fr = """Une constante dans les termes de creation de Omega""",
+ ang = """A constant in the production terms of Omega""",
),
# -----------------------------------
DISSIPATION_COEFFICIENT_FOR_SECONDARY_CURRENTS = SIMP(statut ='o',
# -----------------------------------
typ = 'R',
defaut = 5.E-1,
- fr = """ Coefficient de dissipation de Omega""",
- ang = """ Coefficient of dissipation term of Omega""",
+ fr = """Coefficient de dissipation de Omega""",
+ ang = """Coefficient of dissipation term of Omega""",
),
),
),
# -----------------------------------
typ = 'I',
defaut = 0,
- fr = """ Pour imprimer la sequence des appels, mettre 1""",
- ang = """ If 1, calls of subroutines will be printed in the listing""",
+ fr = """Pour imprimer la sequence des appels, mettre 1""",
+ ang = """If 1, calls of subroutines will be printed in the listing""",
),
# -----------------------------------
TIME = FACT(statut='o',
# -----------------------------------
typ = 'R',
defaut = 1.,
- fr = """ Definit le pas de temps en secondes. Remarque : Pour une bonne
+ fr = """Definit le pas de temps en secondes. Remarque : Pour une bonne
precision; il est souhaitable de choisir le pas de temps de telle sorte
que le nombre de Courant de propagation soit inferieur a 2 ; voir 3.
Ceci peut etre realisable en hydraulique fluviale ; mais ne l''est
pratiquement jamais en hydraulique maritime ou l''on peut atteindre des
valeurs de 50.""",
- ang = """ Specifies the time step in seconds.""",
+ ang = """Specifies the time step in seconds.""",
),
# -----------------------------------
NUMBER_OF_TIME_STEPS = SIMP(statut ='f',
# -----------------------------------
typ = 'R',
defaut = 0.,
- fr = """ duree de la simulation. alternative au parametre nombre de pas de
-temps. On en deduit le nombre de pas de temps en prenant l''entier le
-plus proche de (duree du calcul/pas de temps). Si le nombre de pas de
+ fr = """Duree de la simulation. alternative au parametre nombre de pas
+de temps. On en deduit le nombre de pas de temps en prenant l''entier le
+ plus proche de (duree du calcul/pas de temps). Si le nombre de pas de
temps est aussi donne, on prend la plus grande valeur""",
- ang = """ duration of simulation. May be used instead of the parameter NUMBER OF
-TIME STEPS. The nearest integer to (duration/time step) is taken. If
-NUMBER OF TIME STEPS is also given, the greater value is taken""",
+ ang = """Duration of simulation. May be used instead of the parameter
+NUMBER OF TIME STEPS. The nearest integer to (duration/time step) is
+taken.
+If NUMBER OF TIME STEPS is also given, the greater value is taken""",
),
# -----------------------------------
ORIGINAL_DATE_OF_TIME = SIMP(statut ='o',
# -----------------------------------
typ = 'I', min= 3, max= 3,
defaut = [1900,1,1],
- fr = """ Permet de fixer la date d''origine des temps du modele lors de la
-prise en compte de la force generatrice de la maree.""",
- ang = """ Give the date of the time origin of the model when taking into account
-the tide generating force.""",
+ fr = """Permet de fixer la date d''origine des temps du modele lors
+de la prise en compte de la force generatrice de la maree.""",
+ ang = """Give the date of the time origin of the model when taking into
+account the tide generating force.""",
),
# -----------------------------------
ORIGINAL_HOUR_OF_TIME = SIMP(statut ='o',
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ A UTILISER AVEC LE MOT-CLE : CRITERES D''ARRET""",
- ang = """ TO BE USED WITH THE KEY-WORD: STOP CRITERIA""",
+ fr = """A UTILISER AVEC LE MOT-CLE : CRITERES D''ARRET""",
+ ang = """TO BE USED WITH THE KEY-WORD: STOP CRITERIA""",
),
# -----------------------------------
b_STOP_IF_A_STEADY_STATE_IS_REACHEDG = BLOC(condition="STOP_IF_A_STEADY_STATE_IS_REACHED == True",
# -----------------------------------
typ = 'R', min= 3, max= 3,
defaut = [1.E-4,1.E-4,1.E-4],
- fr = """ Criteres d''arret pour un ecoulement permanent ces coefficients sont
-respectivement appliques a 1) U et V 2) H 3) T A utiliser avec le
-mot-cle : ARRET SI UN ETAT PERMANENT EST ATTEINT""",
- ang = """ Stop criteria for a steady state These coefficients are applied
-respectively to 1) U and V 2) H 3) T To be used with the key-word: STOP
-IF A STEADY STATE IS REACHED""",
+ fr = """Criteres d''arret pour un ecoulement permanent
+ces coefficients sont respectivement appliques a
+ 1) U et V
+ 2) H
+ 3) T
+A utiliser avec le mot-cle : ARRET SI UN ETAT PERMANENT EST ATTEINT""",
+ ang = """Stop criteria for a steady state
+These coefficients are applied respectively to
+ 1) U and V
+ 2) H
+ 3) T
+To be used with the key-word: STOP IF A STEADY STATE IS REACHED""",
),
),
# -----------------------------------
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Utiliser avec le mot-cle : valeurs limites, le programme s''arrete si
-les limites sur u,v,h ou t sont depassees""",
- ang = """ Use with the key-word : limit values, the program is stopped if the
-limits on u,v,h, or t are trespassed""",
+ fr = """Utiliser avec le mot-cle : valeurs limites, le programme
+s''arrete si les limites sur u,v,h ou t sont depassees""",
+ ang = """Use with the key-word : limit values,
+the program is stopped if
+the limits on u,v,h, or t are trespassed""",
),
# -----------------------------------
b_CONTROL_OF_LIMITSG = BLOC(condition="CONTROL_OF_LIMITS == True",
# -----------------------------------
typ = 'R', min= 8, max= 8,
defaut = [-1000.,9000.,-1000.,1000.,-1000.,1000.,-1000.,1000.],
- fr = """ Utilise avec le mot-cle CONTROLE DES LIMITES valeurs mini et maxi
-acceptables pour H,U,V et T dans l''ordre suivant : min(H) max(H) min(U)
-max(U) min(V) max(V) min(T) max(T)""",
- ang = """ To be used with the key-word CONTROL OF LIMITS min and max acceptable
-values for H,U,V et T in the following order : min(H) max(H) min(U)
-max(U) min(V) max(V) min(T) max(T)""",
+ fr = """Utilise avec le mot-cle CONTROLE DES LIMITES
+ valeurs mini et maxi acceptables pour H,U,V et T dans l''ordre
+ suivant : min(H) max(H) min(U) max(U)
+ min(V) max(V) min(T) max(T)""",
+ ang = """To be used with the key-word CONTROL OF LIMITS
+ min and max acceptable values for H,U,V et T in the following
+ order : min(H) max(H) min(U) max(U)
+ min(V) max(V) min(T) max(T)""",
),
),
# -----------------------------------
# -----------------------------------
typ = 'R',
defaut = 1.,
- fr = """ Nombre de Courant souhaite en cas de pas de temps variable""",
- ang = """ Desired Courant number when VARIABLE TIME-STEP is set to YES""",
+ fr = """Nombre de Courant souhaite en cas de pas de temps variable""",
+ ang = """Desired Courant number when VARIABLE TIME-STEP is set to YES""",
),
),
),
# -----------------------------------
typ = 'I', min= 2, max= 2,
defaut = [0,0],
- fr = """ Valeur en metres, utilise pour eviter les trops grands nombres,
-transmis dans le format Selafin mais pas d''autre traitement pour
-l''instant""",
- ang = """ Value in metres, used to avoid large real numbers, added in Selafin
-format, but so far no other treatment""",
+ fr = """Valeur en metres, utilise
+pour eviter les trops grands nombres, transmis
+dans le format Selafin mais pas d''autre traitement pour l''instant""",
+ ang = """Value in metres, used to avoid large real numbers,
+added in Selafin format, but so far no other treatment""",
),
# -----------------------------------
SPHERICAL_COORDINATES = SIMP(statut ='o',
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Choix des coordonnees spheriques pour la realisation du calcul ( pour
-les grands domaines de calcul). Attention : cette option est etroitement
-liee au maillage qui doit avoir ete saisi sur une carte marine en
-projection de Mercator. Il faut de plus relever sur la carte la LATITUDE
-DU POINT ORIGINE (autre mot-cle) qui correspond dans le maillage a
-l''ordonnee y = 0.""",
- ang = """ Selection of spherical coordinates to perform the computation (for
-large computation domains). Warning: this option is closely related to
-the mesh that should have been entered onto a nautical chart drawn as
-per Mercator projection The LATITUDE OF ORIGIN POINT (another keyword),
-which corresponds to ordinate y=0 in the mesh, must moreover be given.""",
+ fr = """Choix des coordonnees spheriques pour la realisation du calcul
+( pour les grands domaines de calcul).
+Attention : cette option est etroitement liee au
+maillage qui doit avoir
+ete saisi sur une carte marine en projection de Mercator.
+Il faut de plus relever sur la carte la LATITUDE DU POINT ORIGINE
+(autre mot-cle) qui correspond dans le maillage a l''ordonnee y = 0.""",
+ ang = """Selection of spherical coordinates to perform the computation
+(for large computation domains).
+Warning: this option is closely related to the mesh that should have
+been entered onto a nautical chart drawn as per Mercator projection
+The LATITUDE OF ORIGIN POINT (another keyword), which corresponds to
+ordinate y=0 in the mesh, must moreover be given.""",
),
# -----------------------------------
b_SPHERICAL_COORDINATESG = BLOC(condition="SPHERICAL_COORDINATES == True",
# -----------------------------------
typ = 'R',
defaut = 48.,
- fr = """ Determine l''origine utilisee pour le calcul de latitudes lorsque
-l''on effectue un calcul en coordonnees spheriques.""",
- ang = """ Determines the origin used for computing latitudes when a computation
-is made in spherical coordinates. this latitude is in particular used to
-compute the Coriolis force. In cartesian coordinates, Coriolis
-coefficient is considered constant.""",
+ fr = """Determine l''origine utilisee pour le calcul de latitudes
+lorsque l''on effectue un calcul en coordonnees spheriques.""",
+ ang = """Determines the origin used for computing latitudes when
+a computation is made in spherical coordinates.
+this latitude is in particular used to compute the Coriolis force.
+In cartesian coordinates, Coriolis coefficient is considered constant.""",
),
),
# -----------------------------------
# -----------------------------------
typ = 'R',
defaut = 0.,
- fr = """ Fixe la valeur de la longitude du point origine du modele, lors de
-l''utilisation de la force generatrice de la maree.""",
- ang = """ Give the value of the longitude of the origin point of the model, when
-taking into account of the tide generator force.""",
+ fr = """Fixe la valeur de la longitude du point origine du modele,
+lors de l''utilisation de la force generatrice de la maree.""",
+ ang = """Give the value of the longitude of the origin point
+of the model, when taking into account of the tide generator force.""",
),
# -----------------------------------
NORTH = SIMP(statut ='f',
# -----------------------------------
typ = 'R',
defaut = 0.,
- fr = """ Direction du nord en degres, par rapport a l''axe des y dans le sens
-trigonometrique. Notation decimale 10.5 signifie 10 degres et trente
-minutes.""",
- ang = """ Angle of the North with the y axis, in degrees. 10.5 means 10 degrees
-and 30 minutes.""",
+ fr = """Direction du nord en degres, par rapport a l''axe des y
+dans le sens trigonometrique. Notation decimale 10.5 signifie 10 degres
+ et trente minutes.""",
+ ang = """Angle of the North with the y axis, in degrees. 10.5 means
+10 degrees and 30 minutes.""",
),
# -----------------------------------
SPATIAL_PROJECTION_TYPE = SIMP(statut ='o',
typ = 'TXM',
into = ["CARTESIAN, NOT GEOREFERENCED","MERCATOR","LATITUDE LONGITUDE"],
defaut = "CARTESIAN, NOT GEOREFERENCED",
- fr = """ Option 2 ou 3 obligatoire pour les coordonnees spheriques Option 3 :
-latitude et longitude en degres !""",
- ang = """ Option 2 or 3 mandatory for spherical coordinates Option 3: latitude
-and longitude in degrees!""",
+ fr = """Option 2 ou 3 obligatoire pour les coordonnees spheriques
+Option 3 : latitude et longitude en degres !""",
+ ang = """Option 2 or 3 mandatory for spherical coordinates
+Option 3: latitude and longitude in degrees!""",
),
),
)
typ = 'TXM',
into = ["conjugate gradient on a normal equation","conjugate gradient","conjugate residual","minimum error","cgstab","gmres","direct"],
defaut = "conjugate gradient on a normal equation",
- fr = """ Permet de choisir le solveur utilise pour la resolution de l''etape de
-propagation. Toutes les methodes proposees actuellement s''apparentent
-au Gradient Conjugue. Ce sont : 1 : gradient conjugue 2 : residu
-conjugue 3 : gradient conjugue sur equation normale 4 : erreur minimale
-5 : gradient conjugue carre (non programme) 6 : gradient conjugue carre
-stabilise (cgstab) 7 : gmres (voir aussi option du solveur) 8 : direct""",
- ang = """ Makes it possible to select the solver used for solving the
-propagation step. All the currently available methods are variations of
-the Conjugate Gradient method. They are as follows: 1: conjugate
-gradient 2: conjugate residual 3: conjugate gradient on a normal
-equation 4: minimum error 5: conjugate gradient squared (not
-implemented) 6: conjugate gradient squared stabilised (cgstab) 7: gmres
-(see option for solver) 8: direct""",
+ fr = """Permet de choisir le solveur utilise pour la resolution de
+l''etape de propagation. Toutes les methodes proposees actuellement
+s''apparentent au Gradient Conjugue. Ce sont :
+ 1 : gradient conjugue
+ 2 : residu conjugue
+ 3 : gradient conjugue sur equation normale
+ 4 : erreur minimale
+ 5 : gradient conjugue carre (non programme)
+ 6 : gradient conjugue carre stabilise (cgstab)
+ 7 : gmres (voir aussi option du solveur)
+ 8 : direct""",
+ ang = """Makes it possible to select the solver used for solving the
+propagation step. All the currently available methods are variations
+of the Conjugate Gradient method. They are as follows:
+1: conjugate gradient
+2: conjugate residual
+3: conjugate gradient on a normal equation
+4: minimum error
+5: conjugate gradient squared (not implemented)
+6: conjugate gradient squared stabilised (cgstab)
+7: gmres (see option for solver)
+8: direct""",
),
# -----------------------------------
b_SOLVERG = BLOC(condition="SOLVER == 'gmres'",
# -----------------------------------
typ = 'I',
defaut = 2,
- fr = """ si le solveur est GMRES (7) le mot cle est la dimension de l''espace
-de KRYLOV (valeurs conseillees entre 2 et 15)""",
- ang = """ WHEN GMRES (7) IS CHOSEN, DIMENSION OF THE KRYLOV SPACE TRY VALUES
-BETWEEN 2 AND 15""",
+ fr = """si le solveur est GMRES (7) le mot cle est la dimension de
+l''espace de KRYLOV (valeurs conseillees entre 2 et 15)""",
+ ang = """WHEN GMRES (7) IS CHOSEN, DIMENSION OF THE KRYLOV SPACE
+TRY VALUES BETWEEN 2 AND 15""",
),
),
# -----------------------------------
# -----------------------------------
typ = 'R',
defaut = 1.E-4,
- fr = """ Precision demandee pour la resolution de l''etape de propagation (cf.
-Note de principe).""",
- ang = """ Required accuracy for solving the propagation step (refer to Principle
-note).""",
+ fr = """Precision demandee pour la resolution de l''etape de propagation
+ (cf. Note de principe).""",
+ ang = """Required accuracy for solving the propagation step
+(refer to Principle note).""",
),
# -----------------------------------
MAXIMUM_NUMBER_OF_ITERATIONS_FOR_SOLVER = SIMP(statut ='o',
# -----------------------------------
typ = 'I',
defaut = 100,
- fr = """ Les algorithmes utilises pour la resolution de l''etape de propagation
-etant iteratifs; il est necessaire de limiter le nombre d''iterations
-autorisees. Remarque : un maximum de 40 iterations par pas de temps
-semble raisonnable.""",
- ang = """ Since the algorithms used for solving the propagation step are
-iterative, the allowed number of iterations should be limited. NOTE: a
-maximum number of 40 iterations per time step seems to be reasonable.""",
+ fr = """Les algorithmes utilises pour la resolution de l''etape de
+propagation etant iteratifs; il est necessaire de limiter le nombre
+d''iterations autorisees.
+Remarque : un maximum de 40 iterations par pas de temps semble
+raisonnable.""",
+ ang = """Since the algorithms used for solving the propagation step are
+iterative, the allowed number of iterations should be limited.
+NOTE: a maximum number of 40 iterations per time step seems to be
+reasonable.""",
),
# -----------------------------------
CONTINUITY_CORRECTION = SIMP(statut ='o',
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Corrige les vitesses sur les points avec hauteur imposee ou
+ fr = """Corrige les vitesses sur les points avec hauteur imposee ou
l''equation de continuite n''a pas ete resolue""",
- ang = """ Correction of the velocities on points with a prescribed elevation,
-where the continuity equation has not been solved""",
+ ang = """Correction of the velocities on points with a prescribed
+elevation, where the continuity equation has not been solved""",
),
# -----------------------------------
PRECONDITIONING = SIMP(statut ='o',
typ = 'TXM',
into = ["diagonal","no preconditioning","block-diagonal (4-9 matrices)","absolute value of diagonal","crout","gauss-seidel","diagonal and crout"],
defaut = "diagonal",
- fr = """ Permet de preconditionner le systeme de l''etape de propagation afin
-d''accelerer la convergence lors de sa resolution. - 0 : pas de
-preconditionnement; - 2 : preconditionnement diagonal. - 3 :
-preconditionnement diagonal-bloc - 7 : preconditionnement de Crout par
-element ou segment -11 : preconditionnement de Gauss-Seidel par element
-ou segment Certains preconditionnements sont cumulables (les diagonaux 2
-ou 3 avec les autres) Pour cette raison on ne retient que les nombres
-premiers pour designer les preconditionnements. Si l''on souhaite en
-cumuler plusieurs on formera le produit des options correspondantes.""",
- ang = """ Choice of the preconditioning in the propagation step linear system
-that the convergence is speeded up when it is being solved. 0: no
-preconditioning 2: diagonal preconditioning 3: block-diagonal
-preconditioning (systemes a 4 ou 9 matrices) 7: Crout''s preconditioning
-per element or segment 11: Gauss-Seidel''s preconditioning per element
-or segment Some operations (either 2 or 3 diagonal preconditioning) can
-be performed concurrently with the others. Only prime numbers are
-therefore kept to denote the preconditioning operations. When several of
-them are to be performed concurrently, the product of relevant options
-shall be made.""",
+ fr = """Permet de preconditionner le systeme de l''etape de propagation
+afin d''accelerer la convergence lors de sa resolution.
+ - 0 : pas de preconditionnement;
+ - 2 : preconditionnement diagonal.
+ - 3 : preconditionnement diagonal-bloc
+ - 7 : preconditionnement de Crout par element ou segment
+ -11 : preconditionnement de Gauss-Seidel par element ou segment
+Certains preconditionnements sont cumulables
+(les diagonaux 2 ou 3 avec les autres)
+Pour cette raison on ne retient que les nombres premiers pour
+designer les preconditionnements. Si l''on souhaite en cumuler
+plusieurs on formera le produit des options correspondantes.""",
+ ang = """Choice of the preconditioning in the propagation step linear
+system that the convergence is speeded up when it is being solved.
+ 0: no preconditioning
+ 2: diagonal preconditioning
+ 3: block-diagonal preconditioning (systemes a 4 ou 9 matrices)
+ 7: Crout''s preconditioning per element or segment
+11: Gauss-Seidel''s preconditioning per element or segment
+Some operations (either 2 or 3 diagonal preconditioning) can be
+performed concurrently with the others.
+Only prime numbers are therefore kept to denote the preconditioning
+operations. When several of them are to be performed concurrently,
+the product of relevant options shall be made.""",
),
# -----------------------------------
C_U_PRECONDITIONING = SIMP(statut ='o',
# -----------------------------------
typ = bool,
defaut = True,
- fr = """ Changement de variable de H en C dans le systeme lineaire final""",
- ang = """ Change of variable from H to C in the final linear system""",
- ),
-# -----------------------------------
- FINITE_ELEMENT_ASSEMBLY = SIMP(statut ='f',
-# -----------------------------------
- typ = 'TXM',
- into = ["normal","Integer I8","Compensated"],
- defaut = "normal",
- fr = """1 : normal 2 : avec des entiers I8 3:compense""",
- ang = """1: normal 2: with I8 integers 3:compensation""",
+ fr = """Changement de variable de H en C dans le systeme lineaire final""",
+ ang = """Change of variable from H to C in the final linear system""",
),
),
# -----------------------------------
# -----------------------------------
typ = 'R',
defaut = 0.55,
- fr = """ Fixe la valeur du coefficient d''implicitation sur C dans l''etape de
+ fr = """Fixe la valeur du coefficient d''implicitation sur C dans l''etape de
propagation (cf. Note de principe). Les valeurs inferieures a 0.5
donnent un schema instable.""",
- ang = """ Sets the value of the implicitation coefficient for C (the celerity of
+ ang = """Sets the value of the implicitation coefficient for C (the celerity of
waves) in the propagation step (refer to principle note). Values below
0.5 result in an unstable scheme.""",
),
# -----------------------------------
typ = 'R',
defaut = 0.55,
- fr = """ Fixe la valeur du coefficient d''implicitation sur la vitesse dans
+ fr = """Fixe la valeur du coefficient d''implicitation sur la vitesse dans
l''etape de propagation (cf. Note de principe). Les valeurs inferieures
a 0.5 donnent un schema instable.""",
- ang = """ Sets the value of the implicitation coefficient for velocity in the
+ ang = """Sets the value of the implicitation coefficient for velocity in the
propagation step (refer to principle note). Values below 0.5 result in
an unstable condition.""",
),
# -----------------------------------
typ = bool,
defaut = True,
- fr = """ Prise en compte ou non de la propagation de la vitesse et de la
-hauteur d''eau. La diffusion etant contenue dans cette etape sera
-supprimee aussi.""",
- ang = """ Determines whether the propagation step is taken into account or not.
+ fr = """Prise en compte ou non de la propagation de la vitesse et de la
+hauteur d''eau.
+La diffusion etant contenue dans cette etape sera supprimee aussi.""",
+ ang = """Determines whether the propagation step is taken into account
+or not.
The diffusion being included in that step will be deleted as well.""",
),
# -----------------------------------
# -----------------------------------
typ = 'R',
defaut = 0.,
- fr = """ Fixe la hauteur d''eau autour de laquelle s''effectue la linearisation
-lorsque l''option PROPAGATION LINEARISEE est choisie.""",
- ang = """ Sets the water depth about which the linearization is made when the
-LINEARIZED PROPAGATION OPTION is selected.""",
+ fr = """Fixe la hauteur d''eau autour de laquelle s''effectue la
+linearisation lorsque l''option PROPAGATION LINEARISEE est choisie.""",
+ ang = """Sets the water depth about which the linearization is made
+when the LINEARIZED PROPAGATION OPTION is selected.""",
),
# -----------------------------------
INITIAL_GUESS_FOR_U = SIMP(statut ='o',
typ = 'TXM',
into = ["zero","previous","extrapolation"],
defaut = "previous",
- fr = """ Tir initial du solveur de l''etape de propagation. Offre la
-possibilite de modifier la valeur initiale de U, a chaque iteration,
-dans l''etape de propagation en utilisant les valeurs finales de cette
-variable aux pas de temps precedents. Ceci peut permettre d''accelerer
-la vitesse de convergence lors de la resolution du systeme. Trois
-possibilites sont offertes : 0 : U = 0 1 : U = U(n) 2 : U = 2 U(n)-
-U(n-1) (extrapolation)""",
- ang = """ Initial guess for the solver in the propagation step. Makes it
-possible to modify the initial value of U, upon each iteration in the
-propagation step, by using the ultimate values this variable had in the
-earlier time steps. Thus, the convergence can be speeded up when the
-system is being solved. 3 options are available: 0 : U = 0 1 : U = U(n)
-2 : U = 2 U(n)- U(n-1) (extrapolation)""",
+ fr = """Tir initial du solveur de l''etape de propagation.
+Offre la possibilite de modifier la valeur initiale de U, a chaque
+iteration, dans l''etape de propagation en utilisant les valeurs
+finales de cette variable aux pas de temps precedents. Ceci peut
+permettre d''accelerer la vitesse de convergence lors de la resolution
+du systeme. Trois possibilites sont offertes :
+ 0 : U = 0
+ 1 : U = U(n)
+ 2 : U = 2 U(n)- U(n-1) (extrapolation)""",
+ ang = """Initial guess for the solver in the propagation step.
+Makes it possible to modify the initial value of U, upon each
+iteration in the propagation step, by using the ultimate values this
+variable had in the earlier time steps. Thus, the convergence can be
+speeded up when the system is being solved. 3 options are available:
+ 0 : U = 0
+ 1 : U = U(n)
+ 2 : U = 2 U(n)- U(n-1) (extrapolation)""",
),
),
# -----------------------------------
chaque iteration, dans l''etape de propagation en utilisant les valeurs
finales de cette variable aux pas de temps precedents. Ceci peut
permettre d''accelerer la vitesse de convergence lors de la resolution
-du systeme. Trois possibilites sont offertes : 0 : DH = 0. 1 : DH = DHn
-(valeur finale de DH au pas de temps precedent), 2 : DH = 2DHn - DHn-1
-(extrapolation).""",
- ang = """ Initial guess for the solver in the propagation step. Makes it
-possible to modify the initial value of C, upon each iteration in the
-propagation step, by using the ultimate values this variable had in the
-earlier time steps. Thus, the convergence can be speeded up when the
-system is being solved. 3 options are available: 0: DH = 0 1: DH = DHn
-(ultimate DH value in the next previous time step) 2: DH = 2DHn - DHn-1
-(extrapolation)""",
+du systeme. Trois possibilites sont offertes :
+ 0 : DH = 0.
+ 1 : DH = DHn (valeur finale de DH au pas de temps precedent),
+ 2 : DH = 2DHn - DHn-1 (extrapolation).""",
+ ang = """Initial guess for the solver in the propagation step.
+Makes it possible to modify the initial value of C, upon each
+iteration in the propagation step, by using the ultimate values this
+variable had in the earlier time steps. Thus, the convergence can be
+speeded up when the system is being solved. 3 options are available:
+ 0: DH = 0
+ 1: DH = DHn (ultimate DH value in the next previous time step)
+ 2: DH = 2DHn - DHn-1 (extrapolation)""",
),
# -----------------------------------
LINEARIZED_PROPAGATION = SIMP(statut ='o',
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Permet de lineariser l''etape de propagation; par exemple lors de la
-realisation de cas tests pour lesquels on dispose d''une solution
-analytique dans le cas linearise.""",
- ang = """ Provided for linearizing the propagation step, e.g. when performing
-test-cases for which an analytical solution in the linearized case is
-available.""",
+ fr = """Permet de lineariser l''etape de propagation;
+par exemple lors de la realisation de cas tests
+pour lesquels on dispose
+d''une solution analytique dans le cas linearise.""",
+ ang = """Provided for linearizing the propagation step, e.g. when
+performing test-cases for which an analytical
+solution in the linearized
+case is available.""",
),
),
# -----------------------------------
# -----------------------------------
typ = bool,
defaut = True,
- fr = """ Prise en compte ou non des termes de convection. En cas de reponse
-positive; on peut encore supprimer certains termes de convection avec
+ fr = """Prise en compte ou non des termes de convection.
+En cas de reponse positive;
+on peut encore supprimer certains termes de convection avec
les mots-cles CONVECTION DE ...""",
- ang = """ Are the advection terms taken into account or not? If YES, some
-advection terms can still be deleted using the keywords -ADVECTION OF
-..-""",
+ ang = """Are the advection terms taken into account or not?
+If YES, some advection terms can still be deleted using the keywords
+-ADVECTION OF ..-""",
),
# -----------------------------------
ADVECTION_OF_H = SIMP(statut ='o',
# -----------------------------------
typ = bool,
defaut = True,
- fr = """ Prise en compte ou non de la convection de H. Il s''agit en fait dans
-la version 2.0 de la convection de C""",
- ang = """ The advection of H is taken into account or ignored. Actually, in
-version 2.0, the matter is about C advection.""",
+ fr = """Prise en compte ou non de la convection de H.
+Il s''agit en fait dans la version 2.0 de la convection de C""",
+ ang = """The advection of H is taken into account or ignored.
+Actually, in version 2.0, the matter is about C advection.""",
),
# -----------------------------------
ADVECTION_OF_U_AND_V = SIMP(statut ='f',
# -----------------------------------
typ = bool,
defaut = True,
- fr = """ Prise en compte ou non de la convection de U et V.""",
- ang = """ The advection of U and V is taken into account or ignored.""",
+ fr = """Prise en compte ou non de la convection de U et V.""",
+ ang = """The advection of U and V is taken into account or ignored.""",
),
# -----------------------------------
b_ADVECTION_OF_U_AND_VG = BLOC(condition="ADVECTION_OF_U_AND_V == True",
typ = 'TXM',
into = ["NO ADVECTION","CHARACTERISTICS","EXPLICIT + SUPG","EXPLICIT LEO POSTMA","EXPLICIT + MURD SCHEME N","EXPLICIT + MURD SCHEME PSI","N-SCHEME FOR TIDAL FLATS","N-SCHEME FOR TIDAL FLATS","ERIA SCHEME"],
defaut = "CHARACTERISTICS",
- fr = """ Choix du schema de convection pour les vitesses, remplace FORME DE LA
-CONVECTION""",
- ang = """ Choice of the advection scheme for the velocities, replaces TYPE OF
-ADVECTION""",
+ fr = """Choix du schema de convection pour les vitesses,
+remplace FORME DE LA CONVECTION""",
+ ang = """Choice of the advection scheme for the velocities,
+replaces TYPE OF ADVECTION""",
),
),
# -----------------------------------
typ = 'TXM', max='**',
into = ["CHARACTERISTICS","SUPG","CONSERVATIVE N-SCHEME LP","CONSERVATIVE N-SCHEME","CONSERVATIVE PSI-SCHEME","EDGE-BASED N-SCHEME LP","EDGE-BASED N-SCHEME","ERIA SCHEME"],
defaut = ["CHARACTERISTICS","CONSERVATIVE PSI-SCHEME","CHARACTERISTICS","CHARACTERISTICS"],
- fr = """ Choix du schema de convection pour chaque variable ces coefficients
-sont respectivement appliques a 1) U et V 2) H 3) T 4) K ET EPSILON 1 :
-caracteristiques sur h 2 : SUPG 3 : Schema N conservatif 4 : Schema N
-conservatif 5 : Schema PSI conservatif 6 : Schema PSI non conservatif 7
-: schema N implicite non conservatif 13 : Schema N par segment 14 :
-Schema N par segment Second integer must be 5""",
- ang = """ Choice of advection schemes for every variable These coefficients are
-applied respectively to 1) U et V 2) H 3) T 4) K and EPSILON 1:
-characteristics 2: SUPG 3: Conservative N-scheme 4: Conservative
-N-scheme 5: Conservative PSI-scheme 6 : Non conservative PSI scheme 7 :
-Implicit non conservative N scheme 13 : Edge-based N-scheme 14 :
-Edge-based N-scheme Second integer must be 5""",
+ fr = """Choix du schema de convection pour chaque variable
+ces coefficients sont respectivement appliques a
+1) U et V 2) H 3) T 4) K ET EPSILON
+1 : caracteristiques sur h
+2 : SUPG
+3 : Schema N conservatif
+4 : Schema N conservatif
+5 : Schema PSI conservatif
+13 : Schema N par segment
+14 : Schema N par segment
+15 : Schema ERIA
+Second integer must be 5""",
+ ang = """Choice of advection schemes for every variable
+These coefficients are applied respectively to
+1) U et V 2) H 3) T 4) K and EPSILON
+1: characteristics
+2: SUPG
+3: Conservative N-scheme
+4: Conservative N-scheme
+5: Conservative PSI-scheme
+13 : Edge-based N-scheme
+14 : Edge-based N-scheme
+15 : ERIA scheme
+Second integer must be 5""",
),
# -----------------------------------
b_TYPE_OF_ADVECTIONG = BLOC(condition="TYPE_OF_ADVECTION != None",
typ = 'TXM',
into = ["strong","weak"],
defaut = "strong",
- fr = """ 1: forme forte 2: forme faible""",
- ang = """ 1: strong form 2: weak form""",
+ fr = """1: forme forte 2: forme faible""",
+ ang = """1: strong form 2: weak form""",
),
# -----------------------------------
SUPG_OPTION = SIMP(statut ='o',
# -----------------------------------
typ = 'I', min=0, max='**',
defaut = [2,2,2,2],
- fr = """ 0:pas de decentrement SUPG
-1:SUPG classique
-2:SUPG modifiee
-ces coefficients sont respectivement appliques a 1) U et V 2) H 3) T 4)
-K ET EPSILON""",
- ang = """ 0:no upwinding 1: classical SUPG 2:modified SUPG These coefficients
-are applied respectively to 1) U et V 2) H 3) T 4) K and EPSILON""",
+ fr = """0:pas de decentrement SUPG 1:SUPG classique 2:SUPG modifiee
+ces coefficients sont respectivement appliques a
+1) U et V 2) H 3) T 4) K ET EPSILON""",
+ ang = """0:no upwinding 1: classical SUPG 2:modified SUPG
+These coefficients are applied respectively to
+1) U et V 2) H 3) T 4) K and EPSILON""",
),
# -----------------------------------
NUMBER_OF_GAUSS_POINTS_FOR_WEAK_CHARACTERISTICS = SIMP(statut ='f',
# -----------------------------------
typ = 'I',
defaut = 3,
- fr = """ Voir les release notes 6.3""",
- ang = """ See release notes 6.3""",
+ fr = """Voir les release notes 6.3""",
+ ang = """See release notes 6.3""",
),
# -----------------------------------
MASS_LUMPING_FOR_WEAK_CHARACTERISTICS = SIMP(statut ='o',
# -----------------------------------
typ = 'R',
defaut = 0.,
- fr = """ Applique a la matrice de masse""",
- ang = """ To be applied to the mass matrix""",
+ fr = """Applique a la matrice de masse""",
+ ang = """To be applied to the mass matrix""",
),
# -----------------------------------
b_MAXIMUM_NUMBER_OF_ITERATIONS_FOR_ADVECTION_SCHEMESF = BLOC(condition="(ADVECTION_OF_TRACERS == True and SCHEME_FOR_ADVECTION_OF_TRACERS == 'EDGE-BASED N-SCHEME') or (ADVECTION_OF_K_AND_EPSILON == True and SCHEME_FOR_ADVECTION_OF_K_EPSILON == 'EDGE-BASED N-SCHEME') or (ADVECTION_OF_U_AND_V == True and SCHEME_FOR_ADVECTION_OF_VELOCITIES == 'EDGE-BASED N-SCHEME')",
# -----------------------------------
typ = 'I',
defaut = 10,
- fr = """ Seulement pour schemes 13 et 14""",
- ang = """ Only for schemes 13 and 14""",
+ fr = """Seulement pour schemes 13 et 14""",
+ ang = """Only for schemes 13 and 14""",
),
# -----------------------------------
UPWIND_COEFFICIENTS = SIMP(statut ='o',
# -----------------------------------
typ = 'R', min= 4, max= 4,
defaut = [1.,1.,1.,1],
- fr = """ Coefficients utilises par la methode S.U.P.G. ces coefficients sont
-respectivement appliques a 1) U et V 2) H ou C 3) T 4) K ET EPSILON""",
- ang = """ Upwind coefficients used by the S.U.P.G. method These coefficients are
-applied respectively to 1) U and V 2) H or C 3) T 4) K and epsilon""",
+ fr = """Coefficients utilises par la methode S.U.P.G.
+ces coefficients sont respectivement appliques a
+ 1) U et V
+ 2) H ou C
+ 3) T
+ 4) K ET EPSILON""",
+ ang = """Upwind coefficients used by the S.U.P.G. method
+These coefficients are applied respectively to
+ 1) U and V
+ 2) H or C
+ 3) T
+ 4) K and epsilon""",
),
# -----------------------------------
MASS_LUMPING_ON_H = SIMP(statut ='o',
# -----------------------------------
typ = 'R',
defaut = 0.,
- fr = """ TELEMAC offre la possibilite d''effectuer du mass-lumping sur H ou U.
+ fr = """TELEMAC offre la possibilite d''effectuer du mass-lumping
+sur H ou U.
Ceci revient a ramener tout ou partie (suivant la valeur de ce
-coefficient) des matrices AM1 (h) ou AM2 (U) et AM3 (V) sur leur
-diagonale. Cette technique permet d''accelerer le code dans des
-proportions tres importantes et de le rendre egalement beaucoup plus
-stable. Cependant les solutions obtenues se trouvent lissees. Ce
-parametre fixe le taux de mass-lumping effectue sur h.""",
- ang = """ TELEMAC provides an opportunity to carry out mass-lumping either on
-C,H or on the velocity. This is equivalent to bringing the matrices AM1
-(h) or AM2 (U) and AM3 (V) wholly or partly, back onto their diagonal.
+coefficient) des matrices AM1 (h) ou AM2 (U) et AM3 (V) sur
+leur diagonale.
+Cette technique permet d''accelerer le code dans des proportions tres
+importantes et de le rendre egalement beaucoup plus stable. Cependant
+les solutions obtenues se trouvent lissees.
+Ce parametre fixe le taux de mass-lumping effectue sur h.""",
+ ang = """TELEMAC provides an opportunity to carry out mass-lumping
+either on C,H or on the velocity.
+This is equivalent to bringing the matrices AM1 (h) or AM2 (U) and
+AM3 (V) wholly or partly, back onto their diagonal.
Thanks to that technique, the code can be speeded up to a quite
significant extent and it can also be made much more stable. The
-resulting solutions, however, become artificially smoothed. This
-parameter sets the extent of mass-lumping that is performed on h.""",
+resulting solutions, however, become artificially smoothed.
+This parameter sets the extent of mass-lumping that is performed on h.""",
),
# -----------------------------------
MASS_LUMPING_ON_VELOCITY = SIMP(statut ='o',
# -----------------------------------
typ = 'R',
defaut = 0.,
- fr = """ Fixe le taux de mass-lumping effectue sur la vitesse.""",
- ang = """ Sets the amount of mass-lumping that is performed on the velocity.""",
+ fr = """Fixe le taux de mass-lumping effectue sur la vitesse.""",
+ ang = """Sets the amount of mass-lumping that is performed on the velocity.""",
),
# -----------------------------------
SCHEME_OPTION_FOR_ADVECTION_OF_VELOCITIES = SIMP(statut ='f',
# -----------------------------------
typ = 'I',
defaut = 1,
- fr = """ Si present remplace et a priorite sur : OPTION POUR LES
-CARACTERISTIQUES OPTION DE SUPG Si schema PSI ou N : 1=explicite
-2=predicteur-correcteur 3=predicteur-correcteur deuxieme ordre en temps
+ fr = """Si present remplace et a priorite sur :
+OPTION POUR LES CARACTERISTIQUES
+OPTION DE SUPG
+Si schema PSI ou N : 1=explicite 2=predicteur-correcteur
+3=predicteur-correcteur deuxieme ordre en temps
4=implicite""",
- ang = """ If present replaces and has priority over: OPTION FOR CHARACTERISTICS
-SUPG OPTION if N or PSI SCHEME: 1=explicit 2=predictor-corrector 3=
-predictor-corrector second-order in time 4= implicit""",
+ ang = """If present replaces and has priority over:
+OPTION FOR CHARACTERISTICS
+SUPG OPTION
+if N or PSI SCHEME: 1=explicit 2=predictor-corrector
+3= predictor-corrector second-order in time 4= implicit""",
),
# -----------------------------------
FREE_SURFACE_GRADIENT_COMPATIBILITY = SIMP(statut ='o',
# -----------------------------------
typ = 'R',
defaut = 1.,
- fr = """ Des valeurs inferieures a 1 suppriment les oscillations parasites""",
- ang = """ Values less than 1 suppress spurious oscillations""",
+ fr = """Des valeurs inferieures a 1 suppriment les oscillations
+parasites""",
+ ang = """Values less than 1 suppress spurious oscillations""",
),
# -----------------------------------
NUMBER_OF_SUB_ITERATIONS_FOR_NON_LINEARITIES = SIMP(statut ='o',
# -----------------------------------
typ = 'I',
defaut = 1,
- fr = """ Permet de reactualiser, pour un meme pas de temps, les champs
+ fr = """Permet de reactualiser, pour un meme pas de temps, les champs
convecteur et propagateur au cours de plusieurs sous-iterations. A la
premiere sous-iteration, ces champs sont donnes par C et le champ de
vitesses au pas de temps precedent. Aux iterations suivantes, ils sont
pris egaux au champ de vitesse obtenu a la fin de la sous-iteration
precedente. Cette technique permet d''ameliorer la prise en compte des
non linearites.""",
- ang = """ Used for updating, within one time step, the advection and propagation
-field. upon the first sub-iteration, these fields are given by C and the
-velocity field in the previous time step. At subsequent iterations, the
-results of the previous sub-iteration is used to update the advection
-and propagation field. The non-linearities can be taken into account
-through this technique.""",
+ ang = """Used for updating, within one time step, the advection and
+propagation field.
+upon the first sub-iteration, these fields are given by
+C and the velocity field in the previous time step. At subsequent
+iterations, the results of the previous sub-iteration is used to
+update the advection and propagation field.
+The non-linearities can be taken into account through this technique.""",
),
# -----------------------------------
b_TREATMENT_OF_FLUXES_AT_THE_BOUNDARIESF = BLOC(condition="(ADVECTION_OF_TRACERS == True and SCHEME_FOR_ADVECTION_OF_TRACERS in ['EDGE-BASED N-SCHEME','SUPG','CONSERVATIVE N-SCHEME','CONSERVATIVE PSI-SCHEME']) or (ADVECTION_OF_K_AND_EPSILON == True and SCHEME_FOR_ADVECTION_OF_K_EPSILON in ['EDGE-BASED N-SCHEME','SUPG','CONSERVATIVE N-SCHEME','CONSERVATIVE PSI-SCHEME']) or (ADVECTION_OF_U_AND_V == True and SCHEME_FOR_ADVECTION_OF_VELOCITIES in ['EDGE-BASED N-SCHEME','SUPG','CONSERVATIVE N-SCHEME','CONSERVATIVE PSI-SCHEME'])",
typ = 'TXM', min=0, max='**',
into = ["Priority to prescribed values","Priority to fluxes"],
defaut = ["Priority to prescribed values","Priority to prescribed values"],
- fr = """ Utilise pour les schemas SUPG, PSI et N, avec option 2, on ne retrouve
+ fr = """Utilise pour les schemas SUPG, PSI et N, avec option 2, on ne retrouve
pas exactement les valeurs imposees des traceurs, mais le flux est
correct""",
- ang = """ Used so far only with the SUPG, PSI and N schemes. With option 2,
+ ang = """Used so far only with the SUPG, PSI and N schemes. With option 2,
Dirichlet prescribed values are not obeyed, but the fluxes are correct""",
),
# -----------------------------------
NUMBER_OF_CORRECTIONS_OF_DISTRIBUTIVE_SCHEMES = SIMP(statut ='f',
# -----------------------------------
typ = 'I',
- defaut = 1,
- fr = """ Pour les options avec predicteur-correcteur""",
- ang = """ For predictor-corrector options""",
+ defaut = [1],
+ fr = """Pour les options avec predicteur-correcteur""",
+ ang = """For predictor-corrector options""",
),
# -----------------------------------
NUMBER_OF_SUB_STEPS_OF_DISTRIBUTIVE_SCHEMES = SIMP(statut ='f',
# -----------------------------------
typ = bool,
defaut = True,
- fr = """ Permet de decider si l''on prend ou non en compte la diffusion des
-vitesses.""",
- ang = """ Makes it possible to decide whether the diffusion of velocity (i.e.
-viscosity) is taken into account or not.""",
+ fr = """Permet de decider si l''on prend ou non en compte la diffusion
+des vitesses.""",
+ ang = """Makes it possible to decide whether the diffusion of velocity
+(i.e. viscosity) is taken into account or not.""",
),
# -----------------------------------
b_DIFFUSION_OF_VELOCITYG = BLOC(condition="DIFFUSION_OF_VELOCITY == True",
# -----------------------------------
typ = 'R',
defaut = 1.,
- fr = """ Fixe la valeur du coefficient d''implicitation sur les termes de
+ fr = """Fixe la valeur du coefficient d''implicitation sur les termes de
diffusion des vitesses""",
- ang = """ Sets the value of the implicitation coefficient for the diffusion of
+ ang = """Sets the value of the implicitation coefficient for the diffusion of
velocity""",
),
# -----------------------------------
typ = 'TXM',
into = ["div( nu grad(U) )","1/h div ( h nu grad(U)"],
defaut = "div( nu grad(U) )",
- fr = """ 1: Diffusion de la forme div( nu grad(U) ) 2: Diffusion de la forme
-1/h div ( h nu grad(U) )""",
- ang = """ 1: Diffusion in the form div( nu grad(U) ) 2: Diffusion in the form
-1/h div ( h nu grad(U) )""",
+ fr = """1: Diffusion de la forme div( nu grad(U) )
+2: Diffusion de la forme 1/h div ( h nu grad(U) )""",
+ ang = """1: Diffusion in the form div( nu grad(U) )
+2: Diffusion in the form 1/h div ( h nu grad(U) )""",
),
),
),
AUTOMATIC_DIFFERENTIATION = FACT(statut='o',
# -----------------------------------
# -----------------------------------
- NUMBER_OF_DERIVATIVES = SIMP(statut ='o',
+ AD_NUMBER_OF_DERIVATIVES = SIMP(statut ='o',
# -----------------------------------
typ = 'I',
defaut = 0,
of the algorithmic differentiation.""",
),
# -----------------------------------
- NAMES_OF_DERIVATIVES = SIMP(statut ='f',
+ AD_NAMES_OF_DERIVATIVES = SIMP(statut ='f',
# -----------------------------------
typ = 'TXM', min= 2, max= 2,
- fr = """ Noms des differentiateurs utilisateurs en 32 caracteres, 16 pour le
-nom, 16 pour l''unite""",
- ang = """ Name of user differentiators in 32 characters, 16 for the name, 16 for
-the unit.""",
+ fr = """Noms des differentiateurs utilisateurs en 32 caracteres,
+ 16 pour le nom, 16 pour l''unite""",
+ ang = """Name of user differentiators in 32 characters,
+ 16 for the name, 16 for the unit.""",
),
),
# -----------------------------------
typ = 'TXM',
into = ["classical EBE","Edge-based storage"],
defaut = "Edge-based storage",
- fr = """ 1 : EBE classique 3 : Stockage par segments""",
- ang = """ 1 : classical EBE 3 : Edge-based storage""",
+ fr = """1 : EBE classique 3 : Stockage par segments""",
+ ang = """1 : classical EBE 3 : Edge-based storage""",
),
# -----------------------------------
MATRIX_VECTOR_PRODUCT = SIMP(statut ='o',
# -----------------------------------
typ = 'I',
defaut = 1,
- fr = """ 1 : classique 2 : frontal attention, avec 2, il faut une numerotation
-speciale des points""",
- ang = """ 1 : classic 2 : frontal beware, with option 2, a special numbering of
-points is required""",
+ fr = """1 : classique 2 : frontal
+attention, avec 2, il faut une numerotation speciale des points""",
+ ang = """1 : classic 2 : frontal
+beware, with option 2, a special numbering of points is required""",
),
# -----------------------------------
NEWMARK_TIME_INTEGRATION_COEFFICIENT = SIMP(statut ='o',
# -----------------------------------
typ = 'R',
defaut = 1.,
- fr = """ 1. : Euler explicite 0.5 : ordre 2 en temps""",
- ang = """ 1. : Euler explicit 0.5 : order 2 in time""",
+ fr = """1. : Euler explicite 0.5 : ordre 2 en temps""",
+ ang = """1. : Euler explicit 0.5 : order 2 in time""",
),
# -----------------------------------
ZERO = SIMP(statut ='f',
# -----------------------------------
typ = 'R',
defaut = 1.E-10,
- fr = """ Non active pour l''instant.""",
- ang = """ Not yet implemented""",
+ fr = """Non active pour l''instant.""",
+ ang = """Not yet implemented""",
),
# -----------------------------------
PROPAGATION_OPTION = SIMP(statut ='f',
# -----------------------------------
typ = 'I',
defaut = 3,
- fr = """ Non active pour l''instant.""",
- ang = """ Not yet implemented.""",
+ fr = """Non active pour l''instant.""",
+ ang = """Not yet implemented.""",
),
# -----------------------------------
OPTION_OF_THE_HYDROSTATIC_RECONSTRUCTION = SIMP(statut ='f',
# -----------------------------------
typ = 'I',
defaut = 1,
- fr = """ Donne l option de la reconstruction hydrostatique (option utile
-uniquement pour les volumes finis): 1: option d Audusse, 2: option de
-Noelle""",
- ang = """ Gives the option for hydrostatic reconstruction (used only for finite
-volumes): 1: option of Audusse, 2: option of Noelle""",
- ),
-# -----------------------------------
- CONVERGENCE_STUDY = SIMP(statut ='f',
-# -----------------------------------
- typ = bool,
- defaut = False,
- fr = """Active une etude de convergence par rapport a une
-solution analytique sur un maillage fin""",
- ang = """Activates a convergence study compared
-to an analytical solution on a fine mesh""",
- ),
-# -----------------------------------
- REFINEMENT_LEVELS = SIMP(statut ='f',
-# -----------------------------------
- typ = 'I',
- defaut = 0,
- fr = """Donne le nombre de raffinements que l''utilisateur
-veut utiliser pour l''etude de convergence
-(en activant CONVERGENCE). Chaque niveau multiplie par 4 le
-nombre d''elements.""",
- ang = """Gives the number of refinement levels that the
-user wants to use in the convergence study (when activating
-CONVERGENCE). Each level multiplies the number of elements by
-4""",
+ fr = """donne l option de la reconstruction hydrostatique
+(option utile uniquement pour les volumes finis):
+1: option d Audusse, 2: option de Noelle""",
+ ang = """gives the option for hydrostatic reconstruction
+(used only for finite volumes):
+1: option of Audusse, 2: option of Noelle""",
),
),
)
# -----------------------------------
typ = 'R',
defaut = 1.E-6,
- fr = """ Fixe de facon uniforme pour l''ensemble du domaine; la valeur du
-coefficient de diffusion de viscosite globale (dynamique + turbulente).
-Cette valeur peut avoir une influence non negligeable sur la forme et la
-taille des recirculations.""",
- ang = """ Sets, in an even way for the whole domain, the value of the
-coefficient of global (dynamic+turbulent) viscosity. this value may have
-a significant effect both on the shapes and sizes of recirculation
-zones.""",
+ fr = """Fixe de facon uniforme pour l''ensemble du domaine;
+la valeur du coefficient de diffusion de viscosite globale (dynamique +
+turbulente). Cette valeur peut avoir une influence non negligeable sur
+la forme et la taille des recirculations.""",
+ ang = """Sets, in an even way for the whole domain, the value of the
+coefficient of global (dynamic+turbulent) viscosity. this value may
+have a significant effect both on the shapes and sizes of
+recirculation zones.""",
),
# -----------------------------------
TURBULENCE_MODEL = SIMP(statut ='o',
typ = 'TXM',
into = ["CONSTANT VISCOSITY","ELDER","K-EPSILON MODEL","SMAGORINSKI","MIXING LENGTH","SPALART-ALLMARAS"],
defaut = "CONSTANT VISCOSITY",
- fr = """ 3 choix sont possibles actuellement : viscosite constante (1) modele
-de Elder (2) ou modele k-epsilon (3). Attention : si on choisit
-l''option 1 il ne faut pas oublier d''ajuster la valeur du mot-cle
-COEFFICIENT DE DIFFUSION DES VITESSES. si on choisit l''option 2 il ne
-faut pas oublier d''ajuster les deux valeurs du mot-cle : COEFFICIENTS
-ADIMENSIONNELS DE DISPERSION Si on choisit l''option 3; ce meme
-parametre doit retrouver sa vraie valeur physique car elle est utilisee
-comme telle dans le modele de turbulence""",
- ang = """ The current alternatives are as follows: constant viscosity (1)
-elder''s model (2) or k-epsilon model (3). NOTE: when option 1 is
-chosen, it should be kept in mind that the value of the keyword VELOCITY
-DIFFUSIVITY has to be ajusted. When option 2 is chosen, the two values
-of key-word : NON-DIMENSIONAL DISPERSION COEFFICIENTS are used When
-option 3 is chosen, this parameter should recover its true physical
-value, since it is used as such in the turbulence model.""",
+ fr = """3 choix sont possibles actuellement : viscosite constante (1)
+modele de Elder (2) ou modele k-epsilon (3).
+Attention : si on choisit l''option 1
+il ne faut pas oublier d''ajuster la valeur du mot-cle COEFFICIENT DE
+DIFFUSION DES VITESSES.
+si on choisit l''option 2
+il ne faut pas oublier d''ajuster les deux valeurs du mot-cle :
+COEFFICIENTS ADIMENSIONNELS DE DISPERSION
+Si on choisit l''option 3;
+ce meme parametre doit retrouver sa vraie valeur physique car elle est
+utilisee comme telle dans le modele de turbulence""",
+ ang = """The current alternatives are as follows: constant viscosity (1)
+elder''s model (2) or k-epsilon model (3).
+NOTE: when option 1 is chosen, it should be kept in mind that the
+value of the keyword VELOCITY DIFFUSIVITY has to be ajusted.
+When option 2 is chosen, the two values of key-word :
+NON-DIMENSIONAL DISPERSION COEFFICIENTS are used
+When option 3 is chosen, this parameter should recover its true
+physical value, since it is used as such in the turbulence model.""",
),
# -----------------------------------
b_TURBULENCE_MODELG = BLOC(condition="TURBULENCE_MODEL == 'CONSTANT VISCOSITY'",
# -----------------------------------
typ = 'R', min= 2, max= 2,
defaut = [6.,0.6],
- fr = """ coefficients longitudinal et transversal dans la formule de Elder.
-Utilises uniquement avec le modele de turbulence 2""",
- ang = """ Longitudinal and transversal coefficients in elder s formula. Used
-only with turbulence model number 2""",
+ fr = """Coefficients longitudinal et transversal dans la formule de
+Elder. Utilises uniquement avec le modele de turbulence 2""",
+ ang = """Longitudinal and transversal coefficients in elder s formula.
+ Used only with turbulence model number 2""",
),
),
-# -----------------------------------
- ACCURACY_OF_SPALART_ALLMARAS = SIMP(statut ='f',
-# -----------------------------------
- typ = 'R',
- defaut = 1.E-9,
- fr = """Fixe la precision demandee sur le modele spalart-allmaras pour
-le test d''arret dans l''etape de diffusion et termes sources de k et
-epsilon.""",
- ang = """Sets the required accuracy for the model spalart-allmaras in
-the diffusion and source-terms step of the k-epsilon model.""",
- ),
-# -----------------------------------
- INFORMATION_ABOUT_SPALART_ALLMARAS_MODEL = SIMP(statut ='f',
-# -----------------------------------
- typ = bool,
- defaut = True,
- fr = """si oui les informations du solveur du modele spalart-allmaras
-sont imprimees""",
- ang = """if yes, informations about solver of spalart-allmaras model
-are printed to the listing""",
- ),
# -----------------------------------
SOLVER_INFO = FACT(statut='o',
# -----------------------------------
typ = 'TXM',
into = ["conjugate gradient","conjugate residuals","conjugate gradient on normal equation","minimum error","conjugate gradient squared","conjugate gradient squared stabilised (cgstab)","gmres (see option for the solver for k-epsilon model)","direct"],
defaut = "conjugate gradient",
- fr = """ Permet de choisir le solveur utilise pour la resolution du systeme du
-modele k-epsilon : 1 : gradient conjugue 2 : residu conjugue 3 :
-gradient conjugue sur equation normale 4 : erreur minimale 5 : gradient
-conjugue carre 6 : gradient conjugue carre stabilise (cgstab) 7 : gmres
-(voir aussi option du solveur pour le modele k-epsilon) 8 : direct""",
- ang = """ Makes it possible to select the solver used for solving the system of
-the k-epsilon model. 1: conjugate gradient 2: conjugate residuals 3:
-conjugate gradient on normal equation 4: minimum error 5: conjugate
-gradient squared 6: conjugate gradient squared stabilised (cgstab) 7:
-gmres (see option for the solver for k-epsilon model) 8: direct""",
+ fr = """Permet de choisir le solveur utilise pour la resolution
+du systeme du modele k-epsilon :
+1 : gradient conjugue
+2 : residu conjugue
+3 : gradient conjugue sur equation normale
+4 : erreur minimale
+5 : gradient conjugue carre
+6 : gradient conjugue carre stabilise (cgstab)
+7 : gmres (voir aussi option du solveur pour le modele k-epsilon)
+8 : direct""",
+ ang = """Makes it possible to select the solver used for solving
+the system of the k-epsilon model.
+1: conjugate gradient
+2: conjugate residuals
+3: conjugate gradient on normal equation
+4: minimum error
+5: conjugate gradient squared
+6: conjugate gradient squared stabilised (cgstab)
+7: gmres (see option for the solver for k-epsilon model)
+8: direct""",
),
# -----------------------------------
OPTION_FOR_THE_SOLVER_FOR_K_EPSILON_MODEL = SIMP(statut ='o',
# -----------------------------------
typ = 'I',
defaut = 2,
- fr = """ si le solveur est GMRES (7) le mot cle est la dimension de l''espace
-de KRILOV (valeurs conseillees entre 2 et 15)""",
- ang = """ WHEN GMRES (7) IS CHOSEN, DIMENSION OF THE KRYLOV SPACE TRY VALUES
-BETWEEN 2 AND 15""",
+ fr = """si le solveur est GMRES (7) le mot cle est la dimension de
+l''espace de KRILOV (valeurs conseillees entre 2 et 15)""",
+ ang = """WHEN GMRES (7) IS CHOSEN, DIMENSION OF THE KRYLOV SPACE
+TRY VALUES BETWEEN 2 AND 15""",
),
# -----------------------------------
PRECONDITIONING_FOR_K_EPSILON_MODEL = SIMP(statut ='o',
typ = 'TXM',
into = ["diagonal","no preconditioning","crout","diagonal and crout"],
defaut = "diagonal",
- fr = """ Permet de preconditionner le systeme relatif au modele k-epsilon 0 :
-pas de preconditionnement; 2 : preconditionnement diagonal. 7 :
-preconditionnement de Crout par element.""",
- ang = """ Preconditioning of the linear system in the diffusion step of the
-k-epsilon model. 0: no preconditioning 2: diagonal preconditioning 7:
-Crout''s preconditioning per element""",
+ fr = """Permet de preconditionner le systeme relatif au
+modele k-epsilon
+0 : pas de preconditionnement;
+2 : preconditionnement diagonal.
+7 : preconditionnement de Crout par element.""",
+ ang = """Preconditioning of the linear system in the diffusion step of
+the k-epsilon model.
+0: no preconditioning
+2: diagonal preconditioning
+7: Crout''s preconditioning per element""",
),
),
# -----------------------------------
# -----------------------------------
typ = bool,
defaut = True,
- fr = """ Donne le nombre d''iterations du solveur de l''etape de diffusion et
-termes sources du modele k-epsilon.""",
- ang = """ Gives the number of iterations of the solver in the diffusion and
-source terms step of the k-epsilon model.""",
+ fr = """Donne le nombre d''iterations du solveur de l''etape de
+diffusion et termes sources du modele k-epsilon.""",
+ ang = """Gives the number of iterations of the solver in the diffusion
+and source terms step of the k-epsilon model.""",
),
# -----------------------------------
ADVECTION_OF_K_AND_EPSILON = SIMP(statut ='o',
# -----------------------------------
typ = bool,
defaut = True,
- fr = """ Prise en compte ou non de la convection de k et epsilon.""",
- ang = """ The k and epsilon advection is taken into account or ignored.""",
+ fr = """Prise en compte ou non de la convection de k et epsilon.""",
+ ang = """The k and epsilon advection is taken into account or ignored.""",
),
# -----------------------------------
b_ADVECTION_OF_K_AND_EPSILONG = BLOC(condition="ADVECTION_OF_K_AND_EPSILON == True",
typ = 'TXM',
into = ["NO ADVECTION","CHARACTERISTICS","EXPLICIT + SUPG","EXPLICIT LEO POSTMA","EXPLICIT + MURD SCHEME N","EXPLICIT + MURD SCHEME PSI","LEO POSTMA FOR TIDAL FLATS","N-SCHEME FOR TIDAL FLATS","ERIA SCHEME FOR TIDAL FLATS"],
defaut = "CHARACTERISTICS",
- fr = """ Choix du schema de convection pour k et epsilon, remplace FORME DE LA
-CONVECTION""",
- ang = """ Choice of the advection scheme for k and epsilon, replaces TYPE OF
-ADVECTION""",
+ fr = """Choix du schema de convection pour k et epsilon,
+remplace FORME DE LA CONVECTION""",
+ ang = """Choice of the advection scheme for k and epsilon,
+replaces TYPE OF ADVECTION""",
),
),
# -----------------------------------
# -----------------------------------
typ = 'I',
defaut = 1,
- fr = """ Si present remplace et a priorite sur : OPTION POUR LES
-CARACTERISTIQUES OPTION DE SUPG Si schema PSI ou N : 1=explicite
-2=predicteur-correcteur 3=predicteur-correcteur deuxieme ordre en temps
+ fr = """Si present remplace et a priorite sur :
+OPTION POUR LES CARACTERISTIQUES
+OPTION DE SUPG
+Si schema PSI ou N : 1=explicite 2=predicteur-correcteur
+3=predicteur-correcteur deuxieme ordre en temps
4=implicite""",
- ang = """ If present replaces and has priority over: OPTION FOR CHARACTERISTICS
-SUPG OPTION if N or PSI SCHEME: 1=explicit 2=predictor-corrector 3=
-predictor-corrector second-order in time 4= implicit""",
+ ang = """If present replaces and has priority over:
+OPTION FOR CHARACTERISTICS
+SUPG OPTION
+if N or PSI SCHEME: 1=explicit 2=predictor-corrector
+3= predictor-corrector second-order in time 4= implicit""",
),
# -----------------------------------
TIME_STEP_REDUCTION_FOR_K_EPSILON_MODEL = SIMP(statut ='f',
# -----------------------------------
typ = 'R',
defaut = 1.,
- fr = """ Coefficient reducteur du pas de temps pour le modele k-epsilon (qui
+ fr = """Coefficient reducteur du pas de temps pour le modele k-epsilon (qui
est normalement identique a celui du systeme hydrodynamique).
Utilisation deconseillee""",
- ang = """ Time step reduction coefficient for k-epsilon model (which is normally
+ ang = """Time step reduction coefficient for k-epsilon model (which is normally
same the same as that of the hydrodynamic system) Not recommended for
use.""",
),
# -----------------------------------
typ = 'R',
defaut = 1.E-9,
- fr = """ Fixe la precision demandee sur k pour le test d''arret dans l''etape
-de diffusion et termes sources du modele k-epsilon.""",
- ang = """ Sets the required accuracy for computing k in the diffusion and source
-terms step of the k-epsilon model.""",
+ fr = """Fixe la precision demandee sur k pour le test d''arret dans
+l''etape de diffusion et termes sources du modele k-epsilon.""",
+ ang = """Sets the required accuracy for computing k in the diffusion
+and source terms step of the k-epsilon model.""",
),
# -----------------------------------
ACCURACY_OF_EPSILON = SIMP(statut ='o',
# -----------------------------------
typ = 'R',
defaut = 1.E-9,
- fr = """ Fixe la precision demandee sur epsilon pour le test d''arret dans
-l''etape de diffusion et termes sources de k et epsilon.""",
- ang = """ Sets the required accuracy for computing epsilon in the diffusion and
-source-terms step of the k-epsilon model.""",
+ fr = """Fixe la precision demandee sur epsilon pour le test d''arret
+dans l''etape de diffusion et termes sources de k et epsilon.""",
+ ang = """Sets the required accuracy for computing epsilon in
+the diffusion and source-terms step of the k-epsilon model.""",
),
# -----------------------------------
MAXIMUM_NUMBER_OF_ITERATIONS_FOR_K_AND_EPSILON = SIMP(statut ='o',
# -----------------------------------
typ = 'I',
defaut = 50,
- fr = """ Fixe le nombre maximum d''iterations accepte lors de la resolution du
-systeme diffusion-termes sources du modele k-epsilon.""",
- ang = """ Sets the maximum number of iterations that are acceptable when solving
-the diffusion source-terms step of the k-epsilon model.""",
+ fr = """Fixe le nombre maximum d''iterations accepte lors de la
+resolution du systeme diffusion-termes sources du modele k-epsilon.""",
+ ang = """Sets the maximum number of iterations that are acceptable when
+solving the diffusion source-terms step of the k-epsilon model.""",
),
),
)
# -----------------------------------
typ = bool,
defaut = True,
- fr = """ permet de supprimer les tests sur les bancs decouvrants, dans les cas
-ou l''on est certain qu''il n''y en aura pas. En cas de doute : oui""",
- ang = """ When no, the specific treatments for tidal flats are by-passed. This
-spares time, but of course you must be sure that you have no tidal
-flats""",
+ fr = """permet de supprimer les tests sur les bancs decouvrants, dans
+les cas ou l''on est certain qu''il n''y en aura pas.
+En cas de doute : oui""",
+ ang = """When no, the specific
+treatments for tidal flats are by-passed.
+This spares time, but of course you must be sure that you have no
+tidal flats""",
),
# -----------------------------------
b_TIDAL_FLATSG = BLOC(condition="TIDAL_FLATS == True",
typ = 'TXM',
into = ["EQUATIONS SOLVED EVERYWHERE WITH CORRECTION ON TIDAL FLATS","DRY ELEMENTS FROZEN","LIKE 1 BUT WITH POROSITY (DEFINA METHOD)"],
defaut = "EQUATIONS SOLVED EVERYWHERE WITH CORRECTION ON TIDAL FLATS",
- fr = """ Utilise si BANCS DECOUVRANTS est vrai 1 : EQUATIONS RESOLUES PARTOUT
-AVEC CORRECTION SUR LES BANCS DECOUVRANTS 2 : GEL DES ELEMENTS
-DECOUVRANTS 3 : COMME 1 MAIS AVEC POROSITE (METHODE DEFINA)""",
- ang = """ Used if TIDAL FLATS is true 1 : EQUATIONS SOLVED EVERYWHERE WITH
-CORRECTION ON TIDAL FLATS 2 : DRY ELEMENTS FROZEN 3 : LIKE 1 BUT WITH
-POROSITY (DEFINA METHOD)""",
+ fr = """Utilise si BANCS DECOUVRANTS est vrai
+1 : EQUATIONS RESOLUES PARTOUT AVEC
+CORRECTION SUR LES BANCS DECOUVRANTS
+2 : GEL DES ELEMENTS DECOUVRANTS
+3 : COMME 1 MAIS AVEC POROSITE (METHODE DEFINA)""",
+ ang = """Used if TIDAL FLATS is true
+1 : EQUATIONS SOLVED EVERYWHERE WITH CORRECTION ON TIDAL FLATS
+2 : DRY ELEMENTS FROZEN
+3 : LIKE 1 BUT WITH POROSITY (DEFINA METHOD)""",
),
# -----------------------------------
b_OPTION_FOR_THE_TREATMENT_OF_TIDAL_FLATSG = BLOC(condition="OPTION_FOR_THE_TREATMENT_OF_TIDAL_FLATS == 'EQUATIONS SOLVED EVERYWHERE WITH CORRECTION ON TIDAL FLATS'",
typ = 'TXM',
into = ["SMOOTHING","FLUX CONTROL","FLUX CONTROL (ERIA)"],
defaut = "SMOOTHING",
- fr = """ Seulement avec OPTION DE TRAITEMENT DES BANCS DECOUVRANTS = 1 0 : pas
-de traitement 1 : lissage 2 : limitation des flux""",
- ang = """ Only with OPTION FOR THE TREATMENT OF TIDAL FLATS=1 0: no treatment
-1:smoothing 2:flux control""",
+ fr = """Seulement avec OPTION DE TRAITEMENT DES BANCS DECOUVRANTS = 1
+ 0 : pas de traitement
+ 1 : lissage
+ 2 : limitation des flux, approche par segment
+ 3 : limitation des flux, approche par triangle""",
+ ang = """Only with OPTION FOR THE TREATMENT OF TIDAL FLATS=1
+ 0:no treatment
+ 1:smoothing
+ 2:flux control, by segment
+ 3:flux control, by element""",
),
),
# -----------------------------------
# -----------------------------------
typ = 'R',
defaut = 0.,
- fr = """ En dessous du seuil, les hauteurs negatives sont lissees""",
- ang = """ Below the threshold the negative depths are smoothed""",
+ fr = """En dessous du seuil, les hauteurs negatives sont lissees""",
+ ang = """Below the threshold the negative depths are smoothed""",
),
# -----------------------------------
THRESHOLD_DEPTH_FOR_RECEDING_PROCEDURE = SIMP(statut ='o',
# -----------------------------------
typ = 'R',
defaut = 0.,
- fr = """ Si > 0., declenche la procedure de ressuyage qui evite le
+ fr = """Si > 0., declenche la procedure de ressuyage qui evite le
franchissement parasite des digues mal discretisees""",
- ang = """ If > 0., will trigger the receding procedure that avoids overwhelming
+ ang = """If > 0., will trigger the receding procedure that avoids overwhelming
of dykes which are too loosely discretised""",
),
# -----------------------------------
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Determine si l''on desire ou non limiter par valeur inferieure la
-hauteur d''eau H (dans le cas des bancs decouvrants par exemple).""",
- ang = """ Determines whether limiting the water depth H by a lower value
-desirable or not. (for instance in the case of tidal flats) This
-key-word may have an influence on mass conservation since the truncation
-of depth is equivalent to adding mass.""",
+ fr = """Determine si l''on desire ou non limiter par valeur inferieure
+la hauteur d''eau H (dans le cas des bancs decouvrants par exemple).""",
+ ang = """Determines whether limiting the water depth H by a lower value
+desirable or not. (for instance in the case of tidal flats)
+This key-word may have an influence on mass conservation since
+the truncation of depth is equivalent to adding mass.""",
),
# -----------------------------------
b_H_CLIPPINGG = BLOC(condition="H_CLIPPING == True",
# -----------------------------------
typ = 'R',
defaut = 0.,
- fr = """ Fixe la valeur minimale de a lorsque l''option CLIPPING DE H est
+ fr = """Fixe la valeur minimale de a lorsque l''option CLIPPING DE H est
activee.""",
- ang = """ Sets the minimum H value when option H CLIPPING is implemented. Not
+ ang = """Sets the minimum H value when option H CLIPPING is implemented. Not
fully implemented.""",
),
),
PRESCRIBED_TRACERS_VALUES = SIMP(statut ='o',
# -----------------------------------
typ = 'R', max='**',
- fr = """ Valeurs du traceur imposees aux frontieres liquides entrantes. Lire la
-partie du mode d''emploi consacree aux conditions aux limites""",
- ang = """ Tracer values prescribed at the inflow boundaries. Read the usermanual
-section dealing with the boundary conditions""",
+ fr = """Valeurs du traceur imposees aux frontieres liquides entrantes.
+Lire la partie du mode d''emploi consacree aux conditions aux limites""",
+ ang = """Tracer values prescribed at the inflow boundaries.
+Read the usermanual section dealing with the boundary conditions""",
),
),
# -----------------------------------
# -----------------------------------
typ = 'I',
defaut = 0,
- fr = """ Definit le nombre de traceurs.""",
- ang = """ Defines the number of tracers""",
+ fr = """Definit le nombre de traceurs.""",
+ ang = """Defines the number of tracers""",
),
# -----------------------------------
NAMES_OF_TRACERS = SIMP(statut ='o',
# -----------------------------------
typ = 'TXM', min=0, max='**',
- fr = """ Noms des traceurs en 32 caracteres, 16 pour le nom 16 pour l''unite""",
- ang = """ Name of tracers in 32 characters, 16 for the name, 16 for the unit.""",
+ fr = """Noms des traceurs en 32 caracteres, 16 pour le nom 16 pour l''unite""",
+ ang = """Name of tracers in 32 characters, 16 for the name, 16 for the unit.""",
),
# -----------------------------------
INITIAL_VALUES_OF_TRACERS = SIMP(statut ='o',
# -----------------------------------
typ = 'R', min=0, max='**',
defaut = [0.,0.],
- fr = """ Fixe la valeur initiale du traceur.""",
- ang = """ Sets the initial value of the tracer.""",
+ fr = """Fixe la valeur initiale du traceur.""",
+ ang = """Sets the initial value of the tracer.""",
),
# -----------------------------------
DENSITY_EFFECTS = SIMP(statut ='o',
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ PRISE EN COMPTE DU GRADIENT HORIZONTAL DE DENSITE LE TRACEUR EST ALORS
-LA SALINITE""",
- ang = """ THE HORIZONTAL GRADIENT OF DENSITY IS TAKEN INTO ACCOUNT THE TRACER IS
-THEN THE SALINITY""",
+ fr = """PRISE EN COMPTE DU GRADIENT HORIZONTAL DE DENSITE
+ LE TRACEUR EST ALORS LA SALINITE""",
+ ang = """THE HORIZONTAL GRADIENT OF DENSITY IS TAKEN INTO ACCOUNT
+ THE TRACER IS THEN THE SALINITY""",
),
# -----------------------------------
b_DENSITY_EFFECTSG = BLOC(condition="DENSITY_EFFECTS == True",
# -----------------------------------
typ = 'R',
defaut = 20.,
- fr = """ TEMPERATURE DE REFERENCE POUR LE CALCUL DES EFFETS DE DENSITE A
-UTILISER AVEC LE MOT-CLE "EFFETS DE DENSITE".""",
- ang = """ REFERENCE TEMPERATURE FOR DENSITY EFFECTS TO BE USED WITH THE KEY-WORD
-"DENSITY EFFECTS".""",
+ fr = """TEMPERATURE DE REFERENCE POUR LE CALCUL DES EFFETS DE DENSITE
+A UTILISER AVEC LE MOT-CLE EFFETS DE DENSITE""",
+ ang = """REFERENCE TEMPERATURE FOR DENSITY EFFECTS
+TO BE USED WITH THE KEY-WORD DENSITY EFFECTS""",
),
),
# -----------------------------------
# -----------------------------------
typ = 'I', min=0, max='**',
defaut = [2],
- fr = """ si le solveur est GMRES (7) le mot cle est la dimension de l''espace
-de KRILOV (valeurs conseillees entre 2 et 15)""",
- ang = """ WHEN GMRES (7) IS CHOSEN, DIMENSION OF THE KRYLOV SPACE TRY VALUES
-BETWEEN 2 AND 15""",
+ fr = """si le solveur est GMRES (7) le mot cle est la dimension de
+l''espace de KRILOV (valeurs conseillees entre 2 et 15)""",
+ ang = """WHEN GMRES (7) IS CHOSEN, DIMENSION OF THE KRYLOV SPACE
+TRY VALUES BETWEEN 2 AND 15""",
),
# -----------------------------------
PRECONDITIONING_FOR_DIFFUSION_OF_TRACERS = SIMP(statut ='o',
typ = 'TXM', min=0, max='**',
into = ["no preconditioning ","diagonal","crout","diagonal and crout"],
defaut = ["diagonal"],
- fr = """ Permet de preconditionner le systeme relatif au traceur. Memes
-definition et possibilites que pour le mot-cle PRECONDITIONNEMENT. 0 :
-pas de preconditionnement; 2 : preconditionnement diagonal. 7 : Crout
-par element""",
- ang = """ Preconditioning of the linear system in the tracer diffusion step.
-Same definition and possibilities as for the keyword PRECONDITIONING 0:
-no preconditioning 2: diagonal preconditioning 7: Crout''s
-preconditioning per element.""",
+ fr = """Permet de preconditionner le systeme relatif au traceur.
+Memes definition et possibilites que pour le mot-cle
+PRECONDITIONNEMENT.
+ 0 : pas de preconditionnement;
+ 2 : preconditionnement diagonal.
+ 7 : Crout par element""",
+ ang = """Preconditioning of the linear system in the tracer diffusion
+step.
+Same definition and possibilities as for the keyword PRECONDITIONING
+ 0: no preconditioning
+ 2: diagonal preconditioning
+ 7: Crout''s preconditioning per element.""",
),
),
# -----------------------------------
# -----------------------------------
typ = 'R',
defaut = 1.E-6,
- fr = """ Fixe la precision demandee pour le calcul de la diffusion du traceur.""",
- ang = """ Sets the required accuracy for computing the tracer diffusion.""",
+ fr = """Fixe la precision demandee pour le calcul de la diffusion
+du traceur.""",
+ ang = """Sets the required accuracy for computing the tracer
+diffusion.""",
),
# -----------------------------------
MAXIMUM_NUMBER_OF_ITERATIONS_FOR_DIFFUSION_OF_TRACERS = SIMP(statut ='o',
defaut = 60,
fr = """ Limite le nombre d''iterations du solveur a chaque pas de temps pour
le calcul de la diffusion du traceur.""",
- ang = """ Limits the number of solver iterations at each time step for the
-diffusion of tracer.""",
+ ang = """Limits the number of solver iterations at each time step for
+the diffusion of tracer.""",
),
),
# -----------------------------------
VALUES_OF_THE_TRACERS_AT_THE_SOURCES = SIMP(statut ='o',
# -----------------------------------
typ = 'R', min=0, max='**',
- fr = """ Valeurs des traceurs a chacune des sources""",
- ang = """ Values of the tracers at the sources""",
+ fr = """Valeurs des traceurs a chacune des sources""",
+ ang = """Values of the tracers at the sources""",
),
),
# -----------------------------------
# -----------------------------------
typ = bool,
defaut = True,
- fr = """ Prise en compte ou non de la convection du traceur passif.""",
- ang = """ The advection of the passive tracer is taken into account or ignored.""",
+ fr = """Prise en compte ou non de la convection du traceur passif.""",
+ ang = """The advection of the passive tracer is taken into account
+or ignored.""",
),
# -----------------------------------
b_ADVECTION_OF_TRACERSG = BLOC(condition="ADVECTION_OF_TRACERS == True",
typ = 'TXM', min=0, max='**',
into = ["NO ADVECTION","CHARACTERISTICS","EXPLICIT + SUPG","EXPLICIT LEO POSTMA","EXPLICIT + MURD SCHEME N","EXPLICIT + MURD SCHEME PSI","LEO POSTMA FOR TIDAL FLATS","N-SCHEME FOR TIDAL FLATS","ERIA SCHEME FOR TIDAL FLATS"],
defaut = ["CHARACTERISTICS"],
- fr = """ Choix du schema de convection pour les traceurs, remplace FORME DE LA
-CONVECTION""",
- ang = """ Choice of the advection scheme for the tracers, replaces TYPE OF
-ADVECTION""",
+ fr = """Choix du schema de convection pour les traceurs,
+remplace FORME DE LA CONVECTION""",
+ ang = """Choice of the advection scheme for the tracers,
+replaces TYPE OF ADVECTION""",
),
),
# -----------------------------------
# -----------------------------------
typ = 'R',
defaut = 0.6,
- fr = """ Fixe la valeur du coefficient d''implicitation du traceur""",
- ang = """ Sets the value of the implicitation coefficient for the tracer""",
+ fr = """Fixe la valeur du coefficient d''implicitation du traceur""",
+ ang = """Sets the value of the implicitation coefficient
+for the tracer""",
),
# -----------------------------------
DIFFUSION_OF_TRACERS = SIMP(statut ='o',
# -----------------------------------
typ = bool,
defaut = True,
- fr = """ Prise en compte ou non de la diffusion du traceur passif.""",
- ang = """ The diffusion of the passive tracer is taken into account or ignored.""",
+ fr = """Prise en compte ou non de la diffusion du traceur passif.""",
+ ang = """The diffusion of the passive tracer is taken into account
+or ignored.""",
),
# -----------------------------------
b_DIFFUSION_OF_TRACERSG = BLOC(condition="DIFFUSION_OF_TRACERS == True",
# -----------------------------------
typ = 'R', min=0, max='**',
defaut = [1.E-6],
- fr = """ Fixe la valeur du coefficient de diffusion du traceur. L''influence de
-ce parametre sur l''evolution du traceur dans le temps est importante.""",
- ang = """ Sets the value of the tracer diffusivity.""",
+ fr = """Fixe la valeur du coefficient de diffusion du traceur.
+L''influence de ce parametre sur l''evolution du traceur dans
+le temps est importante.""",
+ ang = """Sets the value of the tracer diffusivity.""",
),
),
# -----------------------------------
typ = 'TXM', min=0, max='**',
into = ["div( nu grad(T) )","1/h div ( h nu grad(T)"],
defaut = ["div( nu grad(T) )"],
- fr = """ 1: Diffusion de la forme div( nu grad(T) ) 2: Diffusion de la forme
-1/h div ( h nu grad(T) )""",
- ang = """ 1: Diffusion in the form div( nu grad(T) ) 2: Diffusion in the form
-1/h div ( h nu grad(T) )""",
+ fr = """1: Diffusion de la forme div( nu grad(T) )
+2: Diffusion de la forme 1/h div ( h nu grad(T) )""",
+ ang = """1: Diffusion in the form div( nu grad(T) )
+2: Diffusion in the form 1/h div ( h nu grad(T) )""",
),
# -----------------------------------
SCHEME_OPTION_FOR_ADVECTION_OF_TRACERS = SIMP(statut ='o',
# -----------------------------------
typ = 'I', min=0, max='**',
defaut = [1],
- fr = """ Si present remplace et a priorite sur : OPTION POUR LES
-CARACTERISTIQUES OPTION DE SUPG Si schema PSI ou N : 1=explicite
-2=predicteur-correcteur 3=predicteur-correcteur deuxieme ordre en temps
+ fr = """Si present remplace et a priorite sur :
+OPTION POUR LES CARACTERISTIQUES
+OPTION DE SUPG
+Si schema PSI ou N : 1=explicite 2=predicteur-correcteur
+3=predicteur-correcteur deuxieme ordre en temps
4=implicite""",
- ang = """ If present replaces and has priority over: OPTION FOR CHARACTERISTICS
-SUPG OPTION if N or PSI SCHEME: 1=explicit 2=predictor-corrector 3=
-predictor-corrector second-order in time 4= implicit""",
+ ang = """If present replaces and has priority over:
+OPTION FOR CHARACTERISTICS
+SUPG OPTION
+if N or PSI SCHEME: 1=explicit 2=predictor-corrector
+3= predictor-corrector second-order in time 4= implicit""",
),
# -----------------------------------
MASS_LUMPING_ON_TRACERS = SIMP(statut ='o',
# -----------------------------------
typ = 'R',
defaut = 0.,
- fr = """ Fixe le taux de mass-lumping effectue sur le traceur.""",
- ang = """ Sets the amount of mass-lumping that is performed on the tracer.""",
+ fr = """Fixe le taux de mass-lumping effectue sur le traceur.""",
+ ang = """Sets the amount of mass-lumping that is performed on
+ the tracer.""",
),
),
# -----------------------------------
typ = 'TXM', min=0, max='**',
into = ["NO DEGRADATION","F(T90) LAW"],
defaut = ["NO DEGRADATION","NO DEGRADATION"],
- fr = """ Prise en compte d''une loi de decroissance des traceurs""",
- ang = """ Take in account a law for tracers decrease""",
+ fr = """Prise en compte d''une loi de decroissance des traceurs""",
+ ang = """Take in account a law for tracers decrease""",
),
# -----------------------------------
b_LAW_OF_TRACERS_DEGRADATIONG = BLOC(condition="'F(T90) LAW' in LAW_OF_TRACERS_DEGRADATION",
COEFFICIENT_1_FOR_LAW_OF_TRACERS_DEGRADATION = SIMP(statut ='o',
# -----------------------------------
typ = 'R', min=0, max='**',
- fr = """ Coefficient 1 de la loi de decroissance des traceurs""",
- ang = """ Coefficient 1 of law for tracers decrease""",
+ fr = """Coefficient 1 de la loi de decroissance des traceurs""",
+ ang = """Coefficient 1 of law for tracers decrease""",
),
),
),
# -----------------------------------
typ = 'I',
defaut = 0,
- fr = """ Permet d''effectuer un suivi de flotteurs""",
- ang = """ Number of drogues in the computation. The user must then fill the
-subroutine FLOT specifying the coordinates of the starting points, their
-departure and arrival times. The trajectory of drogues is recorded in
-the BINARY RESULTS FILE that must be given in the steering file""",
+ fr = """Permet d''effectuer un suivi de flotteurs""",
+ ang = """Number of drogues in the computation.
+The user must then fill the subroutine FLOT specifying
+the coordinates of the starting points, their departure
+and arrival times.
+The trajectory of drogues is recorded in the BINARY RESULTS
+FILE that must be given in the steering file""",
),
# -----------------------------------
b_NUMBER_OF_DROGUESG = BLOC(condition="NUMBER_OF_DROGUES != 0",
# -----------------------------------
typ = ('Fichier','All Files (*)','Sauvegarde'),
defaut = '',
- fr = """ Fichier de resultat avec les positions des flotteurs""",
- ang = """ Results file with positions of drogues""",
+ fr = """Fichier de resultat avec les positions des flotteurs""",
+ ang = """Results file with positions of drogues""",
),
# -----------------------------------
PRINTOUT_PERIOD_FOR_DROGUES = SIMP(statut ='o',
# -----------------------------------
typ = 'I',
defaut = 1,
- fr = """ Nombre de pas de temps entre 2 sorties de positions de flotteurs dans
-le fichier des resultats binaire supplementaire N affecte pas la qualite
-du calcul de la trajectoire""",
- ang = """ Number of time steps between 2 outputs of drogues positions in the
-binary file""",
+ fr = """Nombre de pas de temps entre 2 sorties de positions de
+flotteurs dans le fichier des resultats binaire supplementaire
+N affecte pas la qualite du calcul de la trajectoire""",
+ ang = """Number of time steps between 2 outputs of drogues
+positions in the binary file""",
),
),
),
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Si oui, les flotteurs seront des algues""",
- ang = """ If yes, the floats or particles will be algae""",
+ fr = """Si oui, les flotteurs seront des algues""",
+ ang = """If yes, the floats or particles will be algae""",
),
# -----------------------------------
b_ALGAE_TRANSPORT_MODELG = BLOC(condition="ALGAE_TRANSPORT_MODEL == True",
typ = 'TXM',
into = ["SPHERE","IRIDAEA FLACCIDA (CLOSE TO ULVA)","PELVETIOPSIS LIMITATA","GIGARTINA LEPTORHYNCHOS"],
defaut = "SPHERE",
- fr = """ Type des algues. Pour le choix 1 les algues seront modelisees comme
-des spheres, pour les autres choix voir Gaylord et al. (1994).""",
- ang = """ Algae type. For choice 1 the algae particles will be modeled as
-spheres, and for the other choices see Gaylord et al. (1994)""",
+ fr = """Type des algues. Pour le choix 1 les algues seront
+modelisees comme des spheres, pour les autres choix voir Gaylord
+et al. (1994).""",
+ ang = """Algae type. For choice 1 the algae particles will be
+modeled as spheres, and for the other choices see Gaylord et
+al. (1994)""",
),
# -----------------------------------
- DIAMETER_OF_ALGAE = SIMP(statut ='o',
+ DIAMETRE_OF_ALGAE = SIMP(statut ='o',
# -----------------------------------
typ = 'R',
defaut = 0.1,
- fr = """ Diametre des algues en m""",
- ang = """ Diametre of algae in m""",
+ fr = """Diametre des algues en m""",
+ ang = """Diametre of algae in m""",
),
# -----------------------------------
DENSITY_OF_ALGAE = SIMP(statut ='o',
# -----------------------------------
typ = 'R',
defaut = 1050.,
- fr = """ Masse volumique des algues en kg/m3""",
- ang = """ Density of algae in kg/m3""",
+ fr = """Masse volumique des algues en kg/m3""",
+ ang = """Density of algae in kg/m3""",
),
# -----------------------------------
THICKNESS_OF_ALGAE = SIMP(statut ='o',
# -----------------------------------
typ = 'R',
defaut = 0.01,
- fr = """ Epaisseur des algues en m""",
- ang = """ Thickness of algae in m""",
+ fr = """Epaisseur des algues en m""",
+ ang = """Thickness of algae in m""",
),
),
),
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ POUR DECLENCHER LE MODELE DE DERIVE DE NAPPES, DANS CE CAS LE FICHIER
-DE COMMANDES MIGRHYCAR EST NECESSAIRE""",
- ang = """ WILL TRIGGER THE OIL SPILL MODEL, IN THIS CASE THE MIGRHYCAR STEERING
-FILE IS NEEDED""",
+ fr = """POUR DECLENCHER LE MODELE DE DERIVE DE NAPPES, DANS
+CE CAS LE FICHIER DE COMMANDES MIGRHYCAR EST NECESSAIRE""",
+ ang = """WILL TRIGGER THE OIL SPILL MODEL, IN THIS CASE
+THE MIGRHYCAR STEERING FILE IS NEEDED""",
),
# -----------------------------------
b_OIL_SPILL_MODELG = BLOC(condition="OIL_SPILL_MODEL == True",
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = '',
- fr = """ Contient les donnees pour le modele de derive de nappes""",
- ang = """ Contains data for the oil spill model""",
+ fr = """Contient les donnees pour le modele de derive de nappes""",
+ ang = """Contains data for the oil spill model""",
),
),
),
typ = 'TXM',
into = ["No model","brownian movement"],
defaut = "No model",
- fr = """ Pour les particules : flotteurs, hydrocarbures""",
- ang = """ Meant for particles: drogues, oil spills""",
+ fr = """Pour les particules : flotteurs, hydrocarbures""",
+ ang = """Meant for particles: drogues, oil spills""",
),
),
# -----------------------------------
# -----------------------------------
typ = 'I',
defaut = 0,
- fr = """ Permet d''effectuer simultanement plusieurs calculs de derives
+ fr = """Permet d''effectuer simultanement plusieurs calculs de derives
lagrangiennes initiees a des pas differents""",
- ang = """ Provided for performing several computations of lagrangian drifts
-starting at different times. Add A and G in the VARIABLES FOR GRAPHIC
-PRINTOUTS key-word""",
+ ang = """Provided for performing several computations of lagrangian
+drifts starting at different times.
+Add A and G in the VARIABLES FOR GRAPHIC PRINTOUTS key-word""",
),
# -----------------------------------
b_NUMBER_OF_LAGRANGIAN_DRIFTSG = BLOC(condition="NUMBER_OF_LAGRANGIAN_DRIFS != 0",
# -----------------------------------
typ = 'I',
defaut = 0,
- fr = """ Nombre de seuils qui seront traites par des conditions aux limites.
-Ces seuils doivent etre decrits comme des frontieres du domaine de
-calcul, et leurs caracteristiques sont donnees dans le fichier de
-donnees des seuils (voir la documentation ecrite)""",
- ang = """ Number of weirs that will be treated by boundary conditions. They must
-be described as boundaries of the domain and their features are given in
-the weir data file (see written documentation)""",
+ fr = """Nombre de seuils qui seront traites par des conditions aux
+limites. Ces seuils doivent etre decrits comme des frontieres du
+domaine de calcul, et leurs caracteristiques sont donnees dans le
+fichier de donnees des seuils (voir la documentation ecrite)""",
+ ang = """Number of weirs that will be treated by boundary conditions.
+They must be described as boundaries of the domain and their features
+are given in the weir data file (see written documentation)""",
),
# -----------------------------------
b_NUMBER_OF_WEIRSG = BLOC(condition="NUMBER_OF_WEIRS != 0",
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = '',
- fr = """ Fichier de description des seuils presents dans le modele""",
- ang = """ Description of weirs existing in the model""",
+ fr = """Fichier de description des seuils presents dans le modele""",
+ ang = """Description of weirs existing in the model""",
),
# -----------------------------------
TYPE_OF_WEIRS = SIMP(statut ='o',
typ = 'TXM',
into = ["HORIZONTAL WITH SAME NUMBER OF NODES UPSTREAM/DOWNSTREAM","GENERAL"],
defaut = "HORIZONTAL WITH SAME NUMBER OF NODES UPSTREAM/DOWNSTREAM",
- fr = """ Methode de traitement des seuils. Deux Solutions:
+ fr = """Methode de traitement des seuils. Deux Solutions:
- HORIZONTAL AVEC MEME NOMBRE DE NOEUDS AMONT/AVAL (Solution historique
avec bord)
- GENERALE (Nouvelle solution avec pts sources)""",
- ang = """ Method for treatment of weirs. Two options:
+ ang = """Method for treatment of weirs. Two options:
- HORIZONTAL WITH SAME NUMBER OF NODES UPSTREAM/DOWNSTREAM (Historical
solution with bord)
- GENERAL (New solution with sources points""",
# -----------------------------------
typ = 'I',
defaut = 0,
- fr = """ Nombre de siphons traites comme des termes sources ou puits. Ces
-siphons doivent etre decrits comme des sources dans le fichier cas.
-Leurs caracteristiques sont donnees dans le fichier de donnees des
-siphons (voir la documentation ecrite)""",
- ang = """ Number of culverts treated as source terms. They must be described as
-sources in the domain and their features are given in the culvert data
-file (see written documentation)""",
+ fr = """Nombre de siphons traites comme des termes sources ou
+puits. Ces siphons doivent etre decrits comme des sources dans le
+fichier cas. Leurs caracteristiques sont donnees dans le
+fichier de donnees des siphons (voir la documentation ecrite)""",
+ ang = """Number of siphons treated as source terms.
+They must be described as sources in the domain and their features
+are given in the culvert data file (see written documentation)""",
),
# -----------------------------------
b_NUMBER_OF_SIPHONSG = BLOC(condition="NUMBER_OF_SIPHONS != 0",
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = '',
- fr = """ Fichier de description des siphons presents dans le modele""",
- ang = """ Description of culvert existing in the model""",
+ fr = """Fichier de description des siphons presents dans le modele""",
+ ang = """Description of culvert existing in the model""",
),
),
),
# -----------------------------------
typ = 'I',
defaut = 0,
- fr = """ Nombre de buses ou ponts traites comme des termes sources ou puits.
-Ces buses doivent etre decrits comme des sources dans le fichier cas.
-Leurs caracteristiques sont donnees dans le fichier de donnees des buses
-(voir la documentation ecrite)""",
- ang = """ Number of culverts or bridges treated as source terms. They must be
-described as sources in the domain and their features are given in the
-culverts data file (see written documentation)""",
+ fr = """Nombre de buses ou ponts traites comme des termes sources ou
+puits. Ces buses doivent etre decrits comme des sources dans le
+fichier cas. Leurs caracteristiques sont donnees dans le
+fichier de donnees des buses (voir la documentation ecrite)""",
+ ang = """Number of culverts, tubes or bridges treated as source terms.
+They must be described as sources in the domain and their features
+are given in the culverts data file (see written documentation)""",
),
# -----------------------------------
b_NUMBER_OF_CULVERTSG = BLOC(condition="NUMBER_OF_CULVERTS != 0",
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = '',
- fr = """ Fichier de description des buses/ponts presents dans le modele""",
- ang = """ Description of tubes/bridges existing in the model""",
+ fr = """Fichier de description des buses/ponts presents dans le modele""",
+ ang = """Description of culverts/tubes/bridges existing in the model""",
),
),
# -----------------------------------
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Prise en compte de breches dans le calcul par modification
-altimetrique dans le maillage. La description des breches se fait avec
-le fichier de donnees des breches.""",
- ang = """ Take in account some breaches during the computation by modifying the
-bottom level of the mesh. Brech description is done with the breaches
-data file.""",
+ fr = """Prise en compte de breches dans le calcul par
+modification altimetrique dans le maillage. La description
+des breches se fait avec le fichier de donnees des breches.""",
+ ang = """Take in account some breaches during the computation
+by modifying the bottom level of the mesh. Brech description
+is done with the breaches data file.""",
),
# -----------------------------------
b_BREACHG = BLOC(condition="BREACH == True",
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = '',
- fr = """ Fichier de description des breches""",
- ang = """ Description of breaches""",
+ fr = """Fichier de description des breches""",
+ ang = """Description of breaches""",
),
),
),
typ = 'TXM',
into = ["NO DEFAULT VALUE","JMJ","TPXO","MISCELLANEOUS (LEGOS-NEA, FES20XX, PREVIMER...)"],
defaut = "NO DEFAULT VALUE",
- fr = """ Pour JMJ, renseigner la localisation du fichier bdd\_jmj et geofin
+ fr = """Pour JMJ, renseigner la localisation du fichier bdd\_jmj et geofin
dans les mots-cles BASE DE DONNEES DE MAREE et FICHIER DU MODELE DE
MAREE. Pour TPXO, LEGOS-NEA, FES20XX et PREVIMER, l''utilisateur doit
telecharger les fichiers de constantes harmoniques sur internet""",
- ang = """ For JMJ, indicate the location of the files bdd\_jmj and geofin with
+ ang = """For JMJ, indicate the location of the files bdd\_jmj and geofin with
keywords TIDE DATA BASE and TIDAL MODEL FILE. For TPXO, LEGOS-NEA,
FES20XX and PREVIMER, the user has to download files of harmonic
constituents on the internet""",
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Pour la base de donnees TPXO uniquement. Interpolation de composantes
-harmoniques mineures a partir de celles lues dans les fichiers d''entree
-lies aux mots-cles BASE BINAIRE 1 DE DONNEES DE MAREE et BASE BINAIRE 2
-DE DONNEES DE MAREE""",
- ang = """ For TPXO tidal data base only. Inference of minor constituents from
-the one read in input files linked to keywords BINARY DATABASE 1 FOR
-TIDE and BINARY DATABASE 2 FOR TIDE""",
+ fr = """Pour la base de donnees TPXO uniquement.
+Interpolation de composantes harmoniques mineures
+a partir de celles lues dans les fichiers d''entree
+lies aux mots-cles BASE BINAIRE 1 DE DONNEES DE MAREE
+et BASE BINAIRE 2 DE DONNEES DE MAREE""",
+ ang = """For TPXO tidal data base only.
+Inference of minor constituents from the one read in input files
+linked to keywords BINARY DATABASE 1 FOR TIDE
+and BINARY DATABASE 2 FOR TIDE""",
),
# -----------------------------------
BINARY_DATABASE_1_FOR_TIDE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = '',
- fr = """ Base de donnees binaire 1 tiree du fichier du modele de maree. Dans le
-cas des donnees satellitaires de TPXO, ce fichier correspond aux donnees
-de niveau d''eau, par exemple h\_tpxo7.2""",
- ang = """ Binary database 1 extracted from the tidal model file. In the case of
-the TPXO satellite altimetry model, this file should be for free surface
-level, for instance h\_tpxo7.2""",
+ fr = """Base de donnees binaire 1 tiree du fichier du modele de maree.
+ Dans le cas des donnees satellitaires de TPXO, ce fichier correspond
+ aux donnees de niveau d''eau, par exemple h\_tpxo7.2""",
+ ang = """Binary database 1 extracted from the tidal model file.
+ In the case of the TPXO satellite altimetry model, this file should
+ be for free surface level, for instance h\_tpxo7.2""",
),
# -----------------------------------
BINARY_DATABASE_2_FOR_TIDE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = '',
- fr = """ Base de donnees binaire 2 tiree du fichier du modele de maree. Dans le
-cas des donnees satellitaires de TPXO, ce fichier correspond aux donnees
-de vitesse de marrees, par exemple u\_tpxo7.2""",
- ang = """ Binary database 2 extracted from the tidal model file. In the case of
-the TPXO satellite altimetry model, this file should be for tidal
-velocities, for instance u\_tpxo7.2""",
+ fr = """Base de donnees binaire 2 tiree du fichier du modele de maree.
+ Dans le cas des donnees satellitaires de TPXO, ce fichier correspond
+ aux donnees de vitesse de marrees, par exemple u\_tpxo7.2""",
+ ang = """Binary database 2 extracted from the tidal model file.
+ In the case of the TPXO satellite altimetry model, this file should
+ be for tidal velocities, for instance u\_tpxo7.2""",
),
),
# -----------------------------------
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = '',
- fr = """ Fichier de geometrie du modele dont sont extraites les constantes
-harmoniques""",
- ang = """ Geometry file of the model from which harmonic constituents are
-extracted""",
+ fr = """Fichier de geometrie du modele dont sont extraites
+les constantes harmoniques""",
+ ang = """Geometry file of the model from which harmonic constituents
+are extracted""",
),
# -----------------------------------
ASCII_DATABASE_FOR_TIDE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = '',
- fr = """ Base de donnees de constantes harmoniques tirees du fichier du modele
-de maree. Ancien nom en version 6.1 : BASE DE DONNEES DE MAREE""",
- ang = """ Tide data base of harmonic constituents extracted from the tidal model
-file. Old name in 6.1 version: TIDE DATA BASE""",
+ fr = """Base de donnees de constantes harmoniques
+tirees du fichier du modele de maree.
+Ancien nom en version 6.1 : BASE DE DONNEES DE MAREE""",
+ ang = """Tide data base of harmonic constituents
+extracted from the tidal model file.
+Old name in 6.1 version: TIDE DATA BASE""",
),
# -----------------------------------
HARMONIC_CONSTANTS_FILE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = '',
- fr = """ Constantes harmoniques extraites du fichier du modele de maree""",
- ang = """ Harmonic constants extracted from the tidalmodel file""",
+ fr = """Constantes harmoniques extraites du fichier du modele de maree""",
+ ang = """Harmonic constants extracted from the tidalmodel file""",
),
),
# -----------------------------------
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Active la prise en compte de la force generatrice de la maree""",
- ang = """ The tide generating force is taken into account.""",
+ fr = """Active la prise en compte de la force generatrice de la maree""",
+ ang = """The tide generating force is taken into account.""",
),
# -----------------------------------
b_TIDE_GENERATING_FORCEG = BLOC(condition="TIDE_GENERATING_FORCE == True",
# -----------------------------------
typ = 'TXM', max='**',
into = ["No tide","Real tide (recommended methodology)","Astronomical tide","Mean spring tide","Mean tide","Mean neap tide","Astronomical neap tide","Real tide (methodology before 2010)"],
- fr = """ Option pour les conditions aux limites de maree. Pour des marees
+ fr = """Option pour les conditions aux limites de maree. Pour des marees
reelles, l option 1 est recommandee. Depuis la version 7.1, ce mot-cle
est un tableau avec une valeur donnee par frontiere liquide, separee par
point-virgules. Ceci permet d''avoir des conditions de maree (ou pas)
le mot-cle doit etre change et plus de valeurs doivent etre donnees.
Calage possible par les mots-cles COEFFICIENT POUR CALAGE EN MARNAGE et
COEFFICIENT POUR CALAGE EN NIVEAU.""",
- ang = """ Option for tidal boundary conditions. For real tides, option 1 is
+ ang = """Option for tidal boundary conditions. For real tides, option 1 is
recommended. This keyword has been an array with a value given per
liquid boundary, separated by semicolons, since version 7.1. This
enables to have tidal conditions (or not) computed on liquid boundaries
typ = 'TXM',
into = ["NO DEFAULT VALUE","DEFINED BY USER","WGS84 LONGITUDE/LATITUDE IN REAL DEGREES","WGS84 NORTHERN UTM","WGS84 SOUTHERN UTM","LAMBERT","MERCATOR FOR TELEMAC"],
defaut = "NO DEFAULT VALUE",
- fr = """ Systeme de coordonnees geographiques dans lequel est construit le
+ fr = """Systeme de coordonnees geographiques dans lequel est construit le
modele numerique. Indiquer la zone correspondante avec le mot-cle""",
- ang = """ Geographic coordinates system in which the numerical model is built.
+ ang = """Geographic coordinates system in which the numerical model is built.
Indicate the corresponding zone with the keyword""",
),
# -----------------------------------
typ = 'TXM',
into = ["NO DEFAULT VALUE","LAMBERT 1 NORTH","LAMBERT 2 CENTER","LAMBERT 3 SOUTH","LAMBERT 4 CORSICA","LAMBERT 2 EXTENDED","UTM ZONE, E.G."],
defaut = "NO DEFAULT VALUE",
- fr = """ Numero de zone (fuseau ou type de projection) lors de l''utilisation
+ fr = """Numero de zone (fuseau ou type de projection) lors de l''utilisation
d''une projection plane. Indiquer le systeme geographique dans lequel
est construit le modele numerique avec le mot-cle SYSTEME GEOGRAPHIQUE""",
- ang = """ Number of zone when using a plane projection. Indicate the geographic
+ ang = """Number of zone when using a plane projection. Indicate the geographic
system in which the numerical model is built with the keyword GEOGRAPHIC
SYSTEM""",
),
# -----------------------------------
typ = 'R',
defaut = 0.,
- fr = """ Coefficient pour ajuster le niveau de mer""",
- ang = """ Coefficient to calibrate the sea level""",
+ fr = """Coefficient pour ajuster le niveau de mer""",
+ ang = """Coefficient to calibrate the sea level""",
),
# -----------------------------------
COEFFICIENT_TO_CALIBRATE_TIDAL_RANGE = SIMP(statut ='o',
# -----------------------------------
typ = 'R',
defaut = 1.,
- fr = """ Coefficient pour ajuster le marnage de l''onde de maree aux frontieres
-maritimes""",
- ang = """ Coefficient to calibrate the tidal range of tidal wave at tidal open
-boundary conditions""",
+ fr = """Coefficient pour ajuster le marnage de l''onde de maree
+aux frontieres maritimes""",
+ ang = """Coefficient to calibrate the tidal range of tidal wave
+at tidal open boundary conditions""",
),
# -----------------------------------
COEFFICIENT_TO_CALIBRATE_TIDAL_VELOCITIES = SIMP(statut ='o',
# -----------------------------------
typ = 'R',
defaut = 999999.,
- fr = """ Coefficient pour ajuster les composantes de vitesse de l''onde de
-maree aux frontieres maritimes. La valeur par defaut 999999. signifie
-que c''est la racine carree du COEFFICIENT DE CALAGE DU MARNAGE qui est
-prise""",
- ang = """ Coefficient to calibrate the tidal velocities of tidal wave at tidal
-open boundary conditions. Default value 999999. means that the square
-root of COEFFICIENT TO CALIBRATE TIDAL RANGE is taken""",
+ fr = """Coefficient pour ajuster les composantes de vitesse
+de l''onde de maree aux frontieres maritimes.
+La valeur par defaut 999999. signifie que c''est la racine carree
+du COEFFICIENT DE CALAGE DU MARNAGE qui est prise""",
+ ang = """Coefficient to calibrate the tidal velocities of tidal wave
+at tidal open boundary conditions.
+Default value 999999. means that the square root of
+COEFFICIENT TO CALIBRATE TIDAL RANGE is taken""",
),
# -----------------------------------
LOCAL_NUMBER_OF_THE_POINT_TO_CALIBRATE_HIGH_WATER = SIMP(statut ='f',
# -----------------------------------
typ = 'I',
defaut = 0,
- fr = """ Numero local du point entre 1 et le nombre de points de frontiere
+ fr = """Numero local du point entre 1 et le nombre de points de frontiere
maritime (du FICHIER DES CONSTANTES HARMONIQUES) ou les conditions aux
limites de maree sont calculees avec les bases de donnees JMJ, NEA, FES,
PREVIMER (sauf les bases de type TPXO). Les ondes de maree sont
dephasees par rapport a ce point pour debuter le calcul par une pleine
mer (en marees schematiques seulement).""",
- ang = """ Local number between 1 and the number of tidal boundary points (of the
+ ang = """Local number between 1 and the number of tidal boundary points (of the
HARMONIC CONSTANTS FILE) where the tidal boundary conditions are
computed with JMJ, NEA, FES, PREVIMER databases (except TPXO-type
databases). The tidal constituents have their phase shifted with respect
# -----------------------------------
typ = 'I',
defaut = 0,
- fr = """ Numero global du point par rapport auquel les ondes de maree sont
+ fr = """Numero global du point par rapport auquel les ondes de maree sont
dephasees pour debuter le calcul par une pleine mer (en marees
schematiques seulement). Ne concerne que les bases de constantes
harmoniques de type TPXO.""",
- ang = """ Global number of the point with respect to which the tidal
+ ang = """Global number of the point with respect to which the tidal
constituents have their phase shifted to start the calculation with a
high water (for schematic tides only). Only harmonic constants databases
like TPXO are concerned.""",
typ = 'TXM',
into = ['SISYPHE','TOMAWAC','DELWAQ'],
defaut = '',
- fr = """ Liste des codes avec lesquels on couple Telemac-2D SISYPHE : couplage
-interne avec Sisyphe TOMAWAC : couplage interne avec Tomawac DELWAQ :
-sortie de fichiers de resultats pour Delwaq""",
- ang = """ List of codes to be coupled with Telemac-2D SISYPHE : internal
-coupling with Sisyphe TOMAWAC : internal coupling with Tomawac DELWAQ:
-will yield results file for Delwaq""",
+ fr = """Liste des codes avec lesquels on couple Telemac-2D
+ SISYPHE : couplage interne avec Sisyphe
+ TOMAWAC : couplage interne avec Tomawac
+ DELWAQ : sortie de fichiers de resultats pour Delwaq""",
+ ang = """List of codes to be coupled with Telemac-2D
+ SISYPHE : internal coupling with Sisyphe
+ TOMAWAC : internal coupling with Tomawac
+ DELWAQ: will yield results file for Delwaq""",
),
# -----------------------------------
NAMES_OF_CLANDESTINE_VARIABLES = SIMP(statut ='f',
# -----------------------------------
typ = 'TXM', min= 2, max= 2,
- fr = """ Noms de variables qui ne sont pas utilisees par TELEMAC; mais qui
-doivent etre conservees lors de son execution. Ceci peut etre utilise
-entre autres lors du couplage de TELEMAC avec un autre code. Les
-variables clandestines sont alors des variables propres a l''autre code
-et sont rendues dans le fichier de resultats.""",
- ang = """ Names of variables that are not used by TELEMAC, but should be
+ fr = """Noms de variables qui ne sont pas utilisees par TELEMAC;
+mais qui doivent etre conservees lors de son execution.
+Ceci peut etre utilise entre autres lors du couplage de TELEMAC
+avec un autre code.
+Les variables clandestines sont alors des variables propres a l''autre
+code et sont rendues dans le fichier de resultats.""",
+ ang = """Names of variables that are not used by TELEMAC, but should be
preserved when it is being run. This keyword may be used, for instance
when it if TELEMAC is coupled with another code. Thus, the clandestine
variables belong to the other code and are given back in the results
# -----------------------------------
typ = 'TXM',
defaut = '',
- fr = """ Nom complet du dossier d echange des fichiers pour couplage de codes""",
- ang = """ Name with full path of the directory where the files will be exchanged
-for coupling""",
+ fr = """Nom complet du dossier d echange des fichiers
+ pour couplage de codes""",
+ ang = """Name with full path of the directory where the files will
+ be exchanged for coupling""",
),
# -----------------------------------
DELWAQ_PRINTOUT_PERIOD = SIMP(statut ='f',
# -----------------------------------
typ = 'I',
defaut = 1,
- fr = """ Periode de sortie des resultats pour Delwaq""",
- ang = """ Printout period for Delwaq file""",
+ fr = """Periode de sortie des resultats pour Delwaq""",
+ ang = """Printout period for Delwaq file""",
),
# -----------------------------------
VOLUMES_DELWAQ_FILE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)','Sauvegarde'),
defaut = '',
- fr = """ Fichier de resultats pour le couplage avec Delwaq""",
- ang = """ Results file for coupling with Delwaq""",
+ fr = """Fichier de resultats pour le couplage avec Delwaq""",
+ ang = """Results file for coupling with Delwaq""",
),
# -----------------------------------
EXCHANGE_AREAS_DELWAQ_FILE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)','Sauvegarde'),
defaut = '',
- fr = """ Fichier de resultats pour le couplage avec Delwaq""",
- ang = """ Results file for coupling with Delwaq""",
+ fr = """Fichier de resultats pour le couplage avec Delwaq""",
+ ang = """Results file for coupling with Delwaq""",
),
# -----------------------------------
VERTICAL_FLUXES_DELWAQ_FILE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)','Sauvegarde'),
defaut = '',
- fr = """ Fichier de resultats pour le couplage avec Delwaq""",
- ang = """ Results file for coupling with Delwaq""",
+ fr = """Fichier de resultats pour le couplage avec Delwaq""",
+ ang = """Results file for coupling with Delwaq""",
),
# -----------------------------------
SALINITY_DELWAQ_FILE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)','Sauvegarde'),
defaut = '',
- fr = """ Fichier de resultats pour le couplage avec Delwaq""",
- ang = """ Results file for coupling with Delwaq""",
+ fr = """Fichier de resultats pour le couplage avec Delwaq""",
+ ang = """Results file for coupling with Delwaq""",
),
# -----------------------------------
BOTTOM_SURFACES_DELWAQ_FILE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)','Sauvegarde'),
defaut = '',
- fr = """ Fichier de resultats pour le couplage avec Delwaq""",
- ang = """ Results file for coupling with Delwaq""",
+ fr = """Fichier de resultats pour le couplage avec Delwaq""",
+ ang = """Results file for coupling with Delwaq""",
),
# -----------------------------------
EXCHANGES_BETWEEN_NODES_DELWAQ_FILE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)','Sauvegarde'),
defaut = '',
- fr = """ Fichier de resultats pour le couplage avec Delwaq""",
- ang = """ Results file for coupling with Delwaq""",
+ fr = """Fichier de resultats pour le couplage avec Delwaq""",
+ ang = """Results file for coupling with Delwaq""",
),
# -----------------------------------
NODES_DISTANCES_DELWAQ_FILE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)','Sauvegarde'),
defaut = '',
- fr = """ Fichier de resultats pour le couplage avec Delwaq""",
- ang = """ Results file for coupling with Delwaq""",
+ fr = """Fichier de resultats pour le couplage avec Delwaq""",
+ ang = """Results file for coupling with Delwaq""",
),
# -----------------------------------
TEMPERATURE_DELWAQ_FILE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)','Sauvegarde'),
defaut = '',
- fr = """ Fichier de resultats pour le couplage avec Delwaq""",
- ang = """ Results file for coupling with Delwaq""",
+ fr = """Fichier de resultats pour le couplage avec Delwaq""",
+ ang = """Results file for coupling with Delwaq""",
),
# -----------------------------------
VELOCITY_DELWAQ_FILE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)','Sauvegarde'),
defaut = '',
- fr = """ Fichier de resultats pour le couplage avec Delwaq""",
- ang = """ Results file for coupling with Delwaq""",
+ fr = """Fichier de resultats pour le couplage avec Delwaq""",
+ ang = """Results file for coupling with Delwaq""",
),
# -----------------------------------
DIFFUSIVITY_DELWAQ_FILE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)','Sauvegarde'),
defaut = '',
- fr = """ Fichier de resultats pour le couplage avec Delwaq""",
- ang = """ Results file for coupling with Delwaq""",
+ fr = """Fichier de resultats pour le couplage avec Delwaq""",
+ ang = """Results file for coupling with Delwaq""",
),
# -----------------------------------
DELWAQ_STEERING_FILE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)','Sauvegarde'),
defaut = '',
- fr = """ Fichier de resultats pour le couplage avec Delwaq""",
- ang = """ Results file for coupling with Delwaq""",
+ fr = """Fichier de resultats pour le couplage avec Delwaq""",
+ ang = """Results file for coupling with Delwaq""",
),
# -----------------------------------
SALINITY_FOR_DELWAQ = SIMP(statut ='f',
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Decide de la sortie de la salinite pour Delwaq""",
- ang = """ Triggers output of salinity for Delwaq""",
+ fr = """Decide de la sortie de la salinite pour Delwaq""",
+ ang = """Triggers output of salinity for Delwaq""",
),
# -----------------------------------
TEMPERATURE_FOR_DELWAQ = SIMP(statut ='f',
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Decide de la sortie de la temperature pour Delwaq""",
- ang = """ Triggers output of temperature for Delwaq""",
+ fr = """Decide de la sortie de la temperature pour Delwaq""",
+ ang = """Triggers output of temperature for Delwaq""",
),
# -----------------------------------
VELOCITY_FOR_DELWAQ = SIMP(statut ='f',
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Decide de la sortie de la vitesse pour Delwaq""",
- ang = """ Triggers output of velocity for Delwaq""",
+ fr = """Decide de la sortie de la vitesse pour Delwaq""",
+ ang = """Triggers output of velocity for Delwaq""",
),
# -----------------------------------
DIFFUSIVITY_FOR_DELWAQ = SIMP(statut ='f',
# -----------------------------------
typ = bool,
defaut = False,
- fr = """ Decide de la sortie du coefficient de diffusion pour Delwaq""",
- ang = """ Triggers output of diffusion for Delwaq""",
+ fr = """Decide de la sortie du coefficient de diffusion pour Delwaq""",
+ ang = """Triggers output of diffusion for Delwaq""",
),
),
# -----------------------------------
# -----------------------------------
typ = 'TXM',
defaut = '',
- fr = """ Fichier des parametres de Sisyphe en cas de couplage interne""",
- ang = """ Sisyphe parameter file in case of internal coupling""",
+ fr = """Fichier des parametres de Sisyphe en cas de couplage interne""",
+ ang = """Sisyphe parameter file in case of internal coupling""",
),
# -----------------------------------
COUPLING_PERIOD_FOR_SISYPHE = SIMP(statut ='f',
# -----------------------------------
typ = 'I',
defaut = 1,
- fr = """ pour eviter de faire le couplage a chaque pas de temps""",
- ang = """ to avoid coupling at every time-step""",
+ fr = """pour eviter de faire le couplage a chaque pas de temps""",
+ ang = """to avoid coupling at every time-step""",
),
),
# -----------------------------------
# -----------------------------------
typ = 'TXM',
defaut = '',
- fr = """ Fichier des parametres de Tomawac en cas de couplage interne""",
- ang = """ Tomawac parameter file in case of internal coupling""",
+ fr = """Fichier des parametres de Tomawac en cas de couplage interne""",
+ ang = """Tomawac parameter file in case of internal coupling""",
),
# -----------------------------------
COUPLING_PERIOD_FOR_TOMAWAC = SIMP(statut ='f',
# -----------------------------------
typ = 'I',
defaut = 1,
- fr = """ pour eviter de faire le couplage a chaque pas de temps""",
- ang = """ to avoid coupling at every time-step""",
+ fr = """pour eviter de faire le couplage a chaque pas de temps""",
+ ang = """to avoid coupling at every time-step""",
),
),
# -----------------------------------
# -----------------------------------
typ = 'TXM',
defaut = '',
- fr = """ fichier des parametres physiques pour les processus de qualite d eau
+ fr = """fichier des parametres physiques pour les processus de qualite d eau
(internes non ceux de DELWAQ)""",
- ang = """ file for physical parameters of waq processes (local ones of
+ ang = """file for physical parameters of waq processes (local ones of
Telemac-tracer not those of DELWAQ)""",
),
),
)
# -----------------------------------------------------------------------
-MISC = PROC(nom= "MISC",op = None,
+INTERNAL = PROC(nom= "INTERNAL",op = None,
# -----------------------------------------------------------------------
# -----------------------------------
LANGUAGE = SIMP(statut ='f',
typ = 'TXM',
into = ["FRANCAIS","ANGLAIS"],
defaut = "ANGLAIS",
- fr = """ 1 : FRANCAIS 2 : ANGLAIS""",
- ang = """ 1: FRENCH 2: ENGLISH""",
+ fr = """1 : FRANCAIS 2 : ANGLAIS""",
+ ang = """1: FRENCH 2: ENGLISH""",
),
-)
-# -----------------------------------------------------------------------
-INTERNAL = PROC(nom= "INTERNAL",op = None,
-# -----------------------------------------------------------------------
# -----------------------------------
STEERING_FILE = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = '',
- fr = """ Nom du fichier contenant les parametres du calcul a realiser.""",
- ang = """ Name of the file containing the parameters of the computation Written
-by the user.""",
+ fr = """Nom du fichier contenant les parametres du calcul a realiser.""",
+ ang = """Name of the file containing the parameters of the computation
+Written by the user.""",
),
# -----------------------------------
DICTIONARY = SIMP(statut ='f',
# -----------------------------------
typ = ('Fichier','All Files (*)'),
defaut = 'telemac2d.dico',
- fr = """ Dictionnaire des mots cles.""",
- ang = """ Key word dictionary.""",
+ fr = """Dictionnaire des mots cles.""",
+ ang = """Key word dictionary.""",
),
# -----------------------------------
PARTITIONING_TOOL = SIMP(statut ='f',
typ = 'TXM',
into = ['METIS','SCOTCH','PARMETIS','PTSCOTCH'],
defaut = 'METIS',
- fr = """ CHOIX DU PARTITIONNEUR 1 : METIS 2 : SCOTCH 3 : PARMETIS 4 : PTSCOTCH
+ fr = """CHOIX DU PARTITIONNEUR
+1 : METIS
+2 : SCOTCH
+3 : PARMETIS
+4 : PTSCOTCH
+etc...""",
+ ang = """PARTITIONING TOOL SELECTION
+1 : METIS
+2 : SCOTCH
+3 : PARMETIS
+4 : PTSCOTCH
etc...""",
- ang = """ PARTITIONING TOOL SELECTION 1 : METIS 2 : SCOTCH 3 : PARMETIS 4 :
-PTSCOTCH etc...""",
),
# -----------------------------------
RELEASE = SIMP(statut ='f',
# -----------------------------------
typ = 'TXM',
defaut = 'TRUNK',
- fr = """ Numero de version des bibliotheques utilisees par TELEMAC. SUR UNE
-STATION DE TRAVAIL 5 versions sont donnees correspondant a :
+ fr = """Numero de version des bibliotheques utilisees par TELEMAC.
+SUR UNE STATION DE TRAVAIL
+5 versions sont donnees correspondant a :
TELEMAC,DAMO,UTILE,BIEF,HP""",
- ang = """ version number of the libraries used by TELEMAC. ON A WORKSTATION 5
-numbers are given, corresponding to the libraries called:
+ ang = """version number of the libraries used by TELEMAC.
+ON A WORKSTATION
+5 numbers are given, corresponding to the libraries called:
TELEMAC,DAMO,UTILE,BIEF,HP""",
),
# -----------------------------------
# -----------------------------------
typ = 'TXM', min=47, max=47,
defaut = 'STEERING FILE;DICTIONARY;FORTRAN FILE;GEOMETRY FILE;BOUNDARY CONDITIONS FILE;RESULTS FILE;PREVIOUS COMPUTATION FILE;BOTTOM TOPOGRAPHY FILE;BINARY DATA FILE 1;BINARY DATA FILE 2;FORMATTED DATA FILE 1;FORMATTED DATA FILE 2;BINARY RESULTS FILE;FORMATTED RESULTS FILE;REFERENCE FILE;LIQUID BOUNDARIES FILE;FRICTION DATA FILE;VOLUMES DELWAQ FILE;EXCHANGE AREAS DELWAQ FILE;VERTICAL FLUXES DELWAQ FILE;SALINITY DELWAQ FILE;VELOCITY DELWAQ FILE;DIFFUSIVITY DELWAQ FILE;BOTTOM SURFACES DELWAQ FILE;EXCHANGES BETWEEN NODES DELWAQ FILE;NODES DISTANCES DELWAQ FILE;TEMPERATURE DELWAQ FILE;DELWAQ STEERING FILE;STAGE-DISCHARGE CURVES FILE;SOURCES FILE;SECTIONS INPUT FILE;SECTIONS OUTPUT FILE;OIL SPILL STEERING FILE;HARMONIC CONSTANTS FILE;TIDAL MODEL FILE;ASCII DATABASE FOR TIDE;BINARY DATABASE 1 FOR TIDE;BINARY DATABASE 2 FOR TIDE;WEIRS DATA FILE;SIPHONS DATA FILE;CULVERTS DATA FILE;BREACHES DATA FILE;DROGUES FILE;ZONES FILE;FLUXLINE INPUT FILE;ASCII ATMOSPHERIC DATA FILE;BINARY ATMOSPHERIC DATA FILE',
- fr = """ Noms des fichiers exploites par le code""",
- ang = """ File names of the used files""",
+ fr = """Noms des fichiers exploites par le code""",
+ ang = """File names of the used files""",
),
# -----------------------------------
DESCRIPTION_OF_LIBRARIES = SIMP(statut ='f',
# -----------------------------------
typ = 'TXM', min=11, max=11,
defaut = 'builds|PPP|lib|telemac2dMMMVVV.LLL;builds|PPP|lib|sisypheMMMVVV.LLL;builds|PPP|lib|tomawacMMMVVV.LLL;builds|PPP|lib|nestorMMMVVV.LLL;builds|PPP|lib|waqtelMMMVVV.LLL;builds|PPP|lib|stbtelMMMVVV.LLL;builds|PPP|lib|biefMMMVVV.LLL;builds|PPP|lib|hermesMMMVVV.LLL;builds|PPP|lib|damoMMMVVV.LLL;builds|PPP|lib|parallelMMMVVV.LLL;builds|PPP|lib|specialMMMVVV.LLL',
- fr = """ Description des librairies de T2D""",
- ang = """ LIBRARIES description""",
+ fr = """Description des librairies de T2D""",
+ ang = """LIBRARIES description""",
),
# -----------------------------------
DEFAULT_EXECUTABLE = SIMP(statut ='f',
# -----------------------------------
typ = 'TXM',
defaut = 'builds|PPP|bin|telemac2dMMMVVV.exe',
- fr = """ Executable par defaut de T2D""",
- ang = """ Default executable for T2D""",
+ fr = """Executable par defaut de T2D""",
+ ang = """Default executable for T2D""",
),
# -----------------------------------
DEFAULT_PARALLEL_EXECUTABLE = SIMP(statut ='f',
# -----------------------------------
typ = 'TXM',
defaut = 'builds|PPP|bin|telemac2dMMMVVV.exe',
- fr = """ Executable parallele par defaut de T2D""",
- ang = """ Default parallel executable for T2D""",
- ),
-)
-# -----------------------------------------------------------------------
-INPUT_OUTPUT__FILES = PROC(nom= "INPUT_OUTPUT__FILES",op = None,
-# -----------------------------------------------------------------------
- UIinfo = {"groupes": ("CACHE")},
-# -----------------------------------
- NAMES = FACT(statut='o',
-# -----------------------------------
-# -----------------------------------
- AD_NUMBER_OF_DIRECTIONS = SIMP(statut ='f',
-# -----------------------------------
- typ = 'I',
- defaut = 1,
- fr = """Definit le nombre de directions de differentiateurs.""",
- ang = """Defines the number of directions for the differentiators""",
- ),
- ),
-)
-# -----------------------------------------------------------------------
-NUMERICAL_PARAMETERS__SOLVER = PROC(nom= "NUMERICAL_PARAMETERS__SOLVER",op = None,
-# -----------------------------------------------------------------------
- UIinfo = {"groupes": ("CACHE")},
-# -----------------------------------
- AD_SYMBOLIC_LINEAR_SOLVER = SIMP(statut ='f',
-# -----------------------------------
- typ = bool,
- defaut = False,
- fr = """Enables the symbolic linear solver for AD.""",
- ang = """Enables the symbolic linear solver for AD.""",
- ),
-# -----------------------------------
- AD_LINEAR_SOLVER_RESET_DERIVATIVES = SIMP(statut ='f',
-# -----------------------------------
- typ = bool,
- defaut = True,
- fr = """Resets the derivatives for AD.""",
- ang = """Resets the derivatives for AD.""",
- ),
-# -----------------------------------
- AD_LINEAR_SOLVER_DERIVATIVE_CONVERGENCE = SIMP(statut ='f',
-# -----------------------------------
- typ = bool,
- defaut = True,
- fr = """Iterative linear solvers: derivative convergence test for AD.""",
- ang = """Iterative linear solvers: derivative convergence test for AD.""",
+ fr = """Executable parallele par defaut de T2D""",
+ ang = """Default parallel executable for T2D""",
),
)
Ordre_Des_Commandes = (
'HYDRAULIC_STRUCTURES',
'TIDES',
'COUPLING',
-'MISC',
-'INTERNAL',
-'INPUT_OUTPUT__FILES',
-'NUMERICAL_PARAMETERS__SOLVER')
+'INTERNAL')
Classement_Commandes_Ds_Arbre = (
'COMPUTATION_ENVIRONMENT',
'HYDRO',
'HYDRAULIC_STRUCTURES',
'TIDES',
'COUPLING',
-'MISC',
-'INTERNAL',
-'INPUT_OUTPUT__FILES',
-'NUMERICAL_PARAMETERS__SOLVER')
+'INTERNAL')
<?xml version="1.0" encoding="utf-8"?><!DOCTYPE TS><TS version="1.1" language="fr"><context>
<name>@default</name>
- <message>
- <source>GEOMETRY_FILE_FORMAT</source>
- <translation>Format du fichier de geometrie</translation>
- </message>
<message>
<source>COEFFICIENT_TO_CALIBRATE_TIDAL_VELOCITIES</source>
<translation>Coefficient de calage des vitesses de courant</translation>
</message>
+ <message>
+ <source>COST_FUNCTION</source>
+ <translation>Fonction cout</translation>
+ </message>
<message>
<source>BOTTOM_TOPOGRAPHY_FILE</source>
<translation>Fichier des fonds</translation>
</message>
<message>
- <source>NUMBER_OF_CORRECTIONS_OF_DISTRIBUTIVE_SCHEMES</source>
- <translation>Nombre de corrections des schemas distributifs</translation>
+ <source>DENSITY_OF_ALGAE</source>
+ <translation>Masse volumique des algues</translation>
</message>
<message>
- <source>WATER_DENSITY</source>
- <translation>Masse volumique de l'eau</translation>
+ <source>STEERING_FILE</source>
+ <translation>Fichier des parametres</translation>
</message>
<message>
- <source>VALUE_OF_ATMOSPHERIC_PRESSURE</source>
- <translation>Valeur de la pression atmospherique</translation>
+ <source>NUMBER_OF_CORRECTIONS_OF_DISTRIBUTIVE_SCHEMES</source>
+ <translation>Nombre de corrections des schemas distributifs</translation>
</message>
<message>
- <source>LISTING_FOR_PRINTOUT_PERIOD</source>
- <translation>Periode pour les sorties listing</translation>
+ <source>LONGITUDE_OF_ORIGIN_POINT</source>
+ <translation>Longitude du point origine</translation>
</message>
<message>
- <source>BINARY_DATABASE_2_FOR_TIDE</source>
- <translation>Base binaire 2 de donnees de maree</translation>
+ <source>PREVIOUS_COMPUTATION_FILE</source>
+ <translation>Fichier du calcul precedent</translation>
</message>
<message>
- <source>VELOCITY_DIFFUSIVITY</source>
- <translation>Coefficient de diffusion des vitesses</translation>
+ <source>DIAMETER_OF_ROUGHNESS_ELEMENTS</source>
+ <translation>Diametre des elements de frottement</translation>
</message>
<message>
- <source>LINEARIZED_PROPAGATION</source>
- <translation>Propagation linearisee</translation>
+ <source>THICKNESS_OF_ALGAE</source>
+ <translation>Epaisseur des algues</translation>
</message>
<message>
- <source>PRINTOUT_PERIOD_FOR_DROGUES</source>
- <translation>Periode pour les sorties de flotteurs</translation>
+ <source>CORIOLIS</source>
+ <translation>Coriolis</translation>
</message>
<message>
- <source>SIPHONS_DATA_FILE</source>
- <translation>Fichier de donnees des siphons</translation>
+ <source>OPTION_FOR_TIDAL_BOUNDARY_CONDITIONS</source>
+ <translation>Option pour les conditions aux limites de maree</translation>
</message>
<message>
- <source>COMPUTATION_CONTINUED</source>
- <translation>Suite de calcul</translation>
+ <source>PARTICULIERES</source>
+ <translation>PARTICULIERES</translation>
</message>
<message>
- <source>FLUXLINE</source>
- <translation>Fluxline</translation>
+ <source>NUMBER_OF_TIME_STEPS</source>
+ <translation>Nombre de pas de temps</translation>
</message>
<message>
- <source>PARALLEL_PROCESSORS</source>
- <translation>Processeurs paralleles</translation>
+ <source>ADVECTION</source>
+ <translation>Convection</translation>
</message>
<message>
- <source>COEFFICIENT_FOR_DIFFUSION_OF_TRACERS</source>
- <translation>Coefficient de diffusion des traceurs</translation>
+ <source>NEWMARK_TIME_INTEGRATION_COEFFICIENT</source>
+ <translation>Coefficient d'integration en temps de newmark</translation>
</message>
<message>
- <source>CULVERTS_DATA_FILE</source>
- <translation>Fichier de donnees des buses</translation>
+ <source>ZERO DEPTH</source>
+ <translation>HAUTEUR NULLE</translation>
</message>
<message>
- <source>DIAMETER_OF_ALGAE</source>
- <translation>Diametre des algues</translation>
+ <source>TIME_STEP</source>
+ <translation>Pas de temps</translation>
</message>
<message>
- <source>OPTION_FOR_CULVERTS</source>
- <translation>Option pour les buses</translation>
+ <source>VALUE_OF_ATMOSPHERIC_PRESSURE</source>
+ <translation>Valeur de la pression atmospherique</translation>
</message>
<message>
- <source>FRICTION_DATA_FILE</source>
- <translation>Fichier de donnees pour le frottement</translation>
+ <source>LISTING_FOR_PRINTOUT_PERIOD</source>
+ <translation>Periode pour les sorties listing</translation>
</message>
<message>
- <source>NAMES_OF_POINTS</source>
- <translation>Noms des points</translation>
+ <source>BINARY_DATABASE_2_FOR_TIDE</source>
+ <translation>Base binaire 2 de donnees de maree</translation>
</message>
<message>
- <source>TOMAWAC_STEERING_FILE</source>
- <translation>Fichier des parametres de TOMAWAC</translation>
+ <source>VOLUMES_DELWAQ_FILE</source>
+ <translation>Fichier DELWAQ des volumes</translation>
</message>
<message>
- <source>STOP_CRITERIA</source>
- <translation>Criteres d'arret</translation>
+ <source>DESCRIPTION_OF_LIBRARIES</source>
+ <translation>Description des librairies</translation>
</message>
<message>
- <source>FINITE_VOLUME_SCHEME</source>
- <translation>Schema en volumes finis</translation>
+ <source>STOP_IF_A_STEADY_STATE_IS_REACHED</source>
+ <translation>Arret si un etat permanent est atteint</translation>
</message>
<message>
- <source>IMPLICITATION_COEFFICIENT_OF_TRACERS</source>
- <translation>Coefficient d'implicitation des traceurs</translation>
+ <source>SALINITY_DELWAQ_FILE</source>
+ <translation>Fichier DELWAQ de la salinite</translation>
</message>
<message>
- <source>SPATIAL_PROJECTION_TYPE</source>
- <translation>Type de projection spatiale</translation>
+ <source>IMPLICITATION_FOR_DEPTH</source>
+ <translation>Implicitation pour la hauteur</translation>
</message>
<message>
- <source>PHYSICAL_CHARACTERISTICS_OF_THE_TSUNAMI</source>
- <translation>Parametres physiques du tsunami</translation>
+ <source>DROGUES_FILE</source>
+ <translation>Fichier des flotteurs</translation>
</message>
<message>
- <source>MASS_BALANCE</source>
- <translation>Bilan de masse</translation>
+ <source>TEMPERATURE_FOR_DELWAQ</source>
+ <translation>Temperature pour DELWAQ</translation>
</message>
<message>
- <source>RESULTS_FILE_FORMAT</source>
- <translation>Format du fichier des resultats</translation>
+ <source>BLOBAL_NUMBERS_OF_SOURCE_NODES</source>
+ <translation>Numeros globaux des noeuds des sources</translation>
</message>
<message>
- <source>BREACHES_DATA_FILE</source>
- <translation>Fichier de donnees des breches</translation>
+ <source>INITIAL_DEPTH</source>
+ <translation>Hauteur initiale</translation>
</message>
<message>
- <source>COEFFICIENT_1_FOR_LAW_OF_TRACERS_DEGRADATION</source>
- <translation>Coefficient 1 de la loi de degradation des traceurs</translation>
+ <source>PARMETIS</source>
+ <translation>PARMETIS</translation>
</message>
<message>
- <source>CONSTANT ELEVATION</source>
- <translation>COTE CONSTANTE</translation>
+ <source>IDENTIFICATION_METHOD</source>
+ <translation>Methode d'identification</translation>
</message>
<message>
- <source>TREATMENT_OF_FLUXES_AT_THE_BOUNDARIES</source>
- <translation>Traitement des flux aux frontieres</translation>
+ <source>SAINT-VENANT FE</source>
+ <translation>SAINT-VENANT EF</translation>
</message>
<message>
- <source>GLOBAL_NUMBER_OF_THE_POINT_TO_CALIBRATE_HIGH_WATER</source>
- <translation>Numero global du point pour caler la pleine mer</translation>
+ <source>COEFFICIENT_FOR_DIFFUSION_OF_TRACERS</source>
+ <translation>Coefficient de diffusion des traceurs</translation>
</message>
<message>
- <source>REFERENCE_FILE_FORMAT</source>
- <translation>Format du fichier de reference</translation>
+ <source>VELOCITY_DIFFUSIVITY</source>
+ <translation>Coefficient de diffusion des vitesses</translation>
</message>
<message>
- <source>BOTTOM_SURFACES_DELWAQ_FILE</source>
- <translation>Fichier DELWAQ des surfaces du fond</translation>
+ <source>VECTOR_LENGTH</source>
+ <translation>Longueur du vecteur</translation>
</message>
<message>
- <source>BINARY_ATMOSPHERIC_DATA_FILE</source>
- <translation>Fichier binaire de donnees atmospheriques</translation>
+ <source>GRAPHIC_PRINTOUT_PERIOD</source>
+ <translation>Periode pour les sorties graphiques</translation>
</message>
<message>
- <source>CONTINUITY_CORRECTION</source>
- <translation>Correction de continuite</translation>
+ <source>LINEARIZED_PROPAGATION</source>
+ <translation>Propagation linearisee</translation>
</message>
<message>
- <source>NAMES_OF_DERIVATIVES</source>
- <translation>Noms des derivees</translation>
+ <source>PRECONDITIONING</source>
+ <translation>Preconditionnement</translation>
</message>
<message>
- <source>FREE_SURFACE_GRADIENT_COMPATIBILITY</source>
- <translation>Compatibilite du gradient de surface libre</translation>
+ <source>MANNING_DEFAULT_VALUE_FOR_COLEBROOK_WHITE_LAW</source>
+ <translation>Valeur par defaut du manning pour la loi de colebrook-white</translation>
</message>
<message>
- <source>NAMES_OF_PRIVATE_VARIABLES</source>
- <translation>Noms des variables privees</translation>
+ <source>PRINTOUT_PERIOD_FOR_DROGUES</source>
+ <translation>Periode pour les sorties de flotteurs</translation>
</message>
<message>
- <source>NODES_DISTANCES_DELWAQ_FILE</source>
- <translation>Fichier DELWAQ des distances entre noeuds</translation>
+ <source>DURATION_OF_RAIN_OR_EVAPORATION_IN_HOURS</source>
+ <translation>Duree de la pluie ou evaporation en heures</translation>
</message>
<message>
- <source>SCHEME_OPTION_FOR_ADVECTION_OF_TRACERS</source>
- <translation>Option du schema pour la convection des traceurs</translation>
+ <source>DEBUGGER</source>
+ <translation>Debugger</translation>
</message>
<message>
- <source>TIME_STEP_REDUCTION_FOR_K_EPSILON_MODEL</source>
- <translation>Reduction du pas de temps pour le modele K-Epsilon</translation>
+ <source>DICTIONARY</source>
+ <translation>Dictionnaire</translation>
</message>
<message>
- <source>DESCRIPTION_OF_LIBRARIES</source>
- <translation>Description des librairies</translation>
+ <source>SIPHONS_DATA_FILE</source>
+ <translation>Fichier de donnees des siphons</translation>
</message>
<message>
- <source>ORIGINAL_HOUR_OF_TIME</source>
- <translation>Heure de l'origine des temps</translation>
+ <source>WATER_DISCHARGE_OF_SOURCES</source>
+ <translation>Debits des sources</translation>
</message>
<message>
- <source>DIFFUSIVITY_FOR_DELWAQ</source>
- <translation>Diffusion pour DELWAQ</translation>
+ <source>ADVECTION_OF_U_AND_V</source>
+ <translation>Convection de U et V</translation>
</message>
<message>
- <source>DISSIPATION_COEFFICIENT_FOR_SECONDARY_CURRENTS</source>
- <translation>Coefficient de dissipation pour courants secondaires</translation>
+ <source>ANTECEDENT_MOISTURE_CONDITIONS</source>
+ <translation>Conditions d'humidite precedente</translation>
</message>
<message>
- <source>ALGAE_TRANSPORT_MODEL</source>
- <translation>Modele de transport des algues</translation>
+ <source>DIFFUSION_OF_VELOCITY</source>
+ <translation>Diffusion des vitesses</translation>
</message>
<message>
- <source>AD_LINEAR_SOLVER_DERIVATIVE_CONVERGENCE</source>
- <translation>Ad linear solver derivative convergence</translation>
+ <source>CONSTANT DEPTH</source>
+ <translation>HAUTEUR CONSTANTE</translation>
</message>
<message>
- <source>TOLERANCES_FOR_IDENTIFICATION</source>
- <translation>Precisions pour l'identification</translation>
+ <source>WATER_DENSITY</source>
+ <translation>Masse volumique de l'eau</translation>
</message>
<message>
- <source>LOCAL_NUMBER_OF_THE_POINT_TO_CALIBRATE_HIGH_WATER</source>
- <translation>Numero local du point pour caler la pleine mer</translation>
+ <source>ORIGIN_COORDINATES</source>
+ <translation>Coordonnees de l'origine</translation>
</message>
<message>
- <source>DELWAQ_PRINTOUT_PERIOD</source>
- <translation>Periode de sortie pour DELWAQ</translation>
+ <source>LATITUDE_OF_ORIGIN_POINT</source>
+ <translation>Latitude du point origine</translation>
</message>
<message>
- <source>DROGUES_FILE</source>
- <translation>Fichier des flotteurs</translation>
+ <source>PRESCRIBED_TRACERS_VALUES</source>
+ <translation>Valeurs imposees des traceurs</translation>
</message>
<message>
- <source>MASS_LUMPING_FOR_WEAK_CHARACTERISTICS</source>
- <translation>Mass-lumping pour les caracteristiques faibles</translation>
+ <source>MAXIMUM_NUMBER_OF_ITERATIONS_FOR_SOLVER</source>
+ <translation>Maximum d'iterations pour le solveur</translation>
</message>
<message>
- <source>GRAVITY_ACCELERATION</source>
- <translation>Acceleration de la pesanteur</translation>
+ <source>FLUXLINE</source>
+ <translation>Fluxline</translation>
</message>
<message>
- <source>TIME_RANGE_FOR_FOURIER_ANALYSIS</source>
- <translation>Bornes en temps pour l'analyse de fourier</translation>
+ <source>TIDE_GENERATING_FORCE</source>
+ <translation>Force generatrice de la maree</translation>
</message>
<message>
- <source>SECTIONS_OUTPUT_FILE</source>
- <translation>Fichier de sortie des sections de controle</translation>
+ <source>VELOCITY_FOR_DELWAQ</source>
+ <translation>Vitesse pour DELWAQ</translation>
</message>
<message>
- <source>SAINT-VENANT FE</source>
- <translation>SAINT-VENANT EF</translation>
+ <source>PARALLEL_PROCESSORS</source>
+ <translation>Processeurs paralleles</translation>
</message>
<message>
- <source>SAINT-VENANT FV</source>
- <translation>SAINT-VENANT VF</translation>
+ <source>ROUGHNESS_COEFFICIENT_OF_BOUNDARIES</source>
+ <translation>Coefficient de rugosite des bords</translation>
</message>
<message>
- <source>ELEMENTS_MASKED_BY_USER</source>
- <translation>Elements masques par l'utilisateur</translation>
+ <source>RAINFALL_RUNOFF_MODEL</source>
+ <translation>Modele pluie-debit</translation>
</message>
<message>
- <source>NAMES_OF_TRACERS</source>
- <translation>Noms des traceurs</translation>
+ <source>PSI_SCHEME_OPTION</source>
+ <translation>Option du schema PSI</translation>
</message>
<message>
- <source>H_CLIPPING</source>
- <translation>Clipping de H</translation>
+ <source>SCHEME_OPTION_FOR_ADVECTION_OF_VELOCITIES</source>
+ <translation>Option du schema pour la convection des vitesses</translation>
</message>
<message>
- <source>PARAMETER_ESTIMATION</source>
- <translation>Estimation de parametre</translation>
+ <source>INITIAL_CONDITIONS</source>
+ <translation>Conditions initiales</translation>
</message>
<message>
- <source>CHECKING_THE_MESH</source>
- <translation>Verification du maillage</translation>
+ <source>INITIAL_TIME_SET_TO_ZERO</source>
+ <translation>Remise a zero du temps</translation>
</message>
<message>
- <source>SOLVER_FOR_K_EPSILON_MODEL</source>
- <translation>Solveur pour le modele K-Epsilon</translation>
+ <source>PTSCOTCH</source>
+ <translation>PTSCOTCH</translation>
</message>
<message>
- <source>LIST_OF_FILES</source>
- <translation>Liste des fichiers</translation>
- </message>
- <message>
- <source>ADVECTION_OF_H</source>
- <translation>Convection de H</translation>
- </message>
- <message>
- <source>NAMES_OF_CLANDESTINE_VARIABLES</source>
- <translation>Noms des variables clandestines</translation>
- </message>
- <message>
- <source>WAQTEL_STEERING_FILE</source>
- <translation>Fichier des parametres de waqtel</translation>
- </message>
- <message>
- <source>MAXIMUM_NUMBER_OF_ITERATIONS_FOR_ADVECTION_SCHEMES</source>
- <translation>Maximum d'iterations pour les schemas de convection</translation>
- </message>
- <message>
- <source>LAW_OF_BOTTOM_FRICTION</source>
- <translation>Loi de frottement sur le fond</translation>
- </message>
- <message>
- <source>MATRIX_VECTOR_PRODUCT</source>
- <translation>Produit matrice-vecteur</translation>
- </message>
- <message>
- <source>ACCURACY_FOR_DIFFUSION_OF_TRACERS</source>
- <translation>Precision pour la diffusion des traceurs</translation>
- </message>
- <message>
- <source>SCHEME_FOR_ADVECTION_OF_TRACERS</source>
- <translation>Schema pour la convection des traceurs</translation>
+ <source>NUMBER_OF_SUB_ITERATIONS_FOR_NON_LINEARITIES</source>
+ <translation>Nombre de sous-iterations pour les non-linearites</translation>
</message>
<message>
- <source>OPTION_FOR_THE_SOLVER_FOR_K_EPSILON_MODEL</source>
- <translation>Option du solveur pour le modele K-Epsilon</translation>
+ <source>OPTION_FOR_THE_DIFFUSION_OF_TRACERS</source>
+ <translation>Option pour la diffusion des traceurs</translation>
</message>
<message>
- <source>FRICTION_DATA</source>
- <translation>Donnees pour le frottement</translation>
+ <source>CULVERTS_DATA_FILE</source>
+ <translation>Fichier de donnees des buses</translation>
</message>
<message>
- <source>METIS</source>
- <translation>METIS</translation>
+ <source>ACCURACY_OF_EPSILON</source>
+ <translation>Precision sur epsilon</translation>
</message>
<message>
- <source>ZONES_FILE</source>
- <translation>Fichier des zones</translation>
+ <source>MAXIMUM_NUMBER_OF_ITERATIONS_FOR_DIFFUSION_OF_TRACERS</source>
+ <translation>Maximum d'iterations pour la diffusion des traceurs</translation>
</message>
<message>
- <source>DENSITY_EFFECTS</source>
- <translation>Effets de densite</translation>
+ <source>MASS_LUMPING_ON_VELOCITY</source>
+ <translation>Mass-lumping sur la vitesse</translation>
</message>
<message>
- <source>THRESHOLD_DEPTH_FOR_RECEDING_PROCEDURE</source>
- <translation>Profondeur limite pour procedure de ressuyage</translation>
+ <source>FRICTION_DATA_FILE</source>
+ <translation>Fichier de donnees pour le frottement</translation>
</message>
<message>
- <source>SISYPHE</source>
- <translation>SISYPHE</translation>
+ <source>SCHEME_FOR_ADVECTION_OF_K_EPSILON</source>
+ <translation>Schema pour la convection du K-Epsilon</translation>
</message>
<message>
- <source>TREATMENT_OF_NEGATIVE_DEPTHS</source>
- <translation>Traitement des hauteurs negatives</translation>
+ <source>SOLVER_ACCURACY</source>
+ <translation>Precision du solveur</translation>
</message>
<message>
- <source>ZONE_NUMBER_IN_GEOGRAPHIC_SYSTEM</source>
- <translation>Numero de fuseau ou projection dans le systeme geographique</translation>
+ <source>NAMES_OF_POINTS</source>
+ <translation>Noms des points</translation>
</message>
<message>
- <source>DIFFUSION_OF_TRACERS</source>
- <translation>Diffusion des traceurs</translation>
+ <source>TOMAWAC_STEERING_FILE</source>
+ <translation>Fichier des parametres de TOMAWAC</translation>
</message>
<message>
- <source>PREVIOUS_COMPUTATION_FILE</source>
- <translation>Fichier du calcul precedent</translation>
+ <source>BOUNDARY_CONDITIONS_FILE</source>
+ <translation>Fichier des conditions aux limites</translation>
</message>
<message>
- <source>DIAMETER_OF_ROUGHNESS_ELEMENTS</source>
- <translation>Diametre des elements de frottement</translation>
+ <source>STOP_CRITERIA</source>
+ <translation>Criteres d'arret</translation>
</message>
<message>
- <source>NUMBER_OF_TIME_STEPS</source>
- <translation>Nombre de pas de temps</translation>
+ <source>BINARY_RESULTS_FILE_FORMAT</source>
+ <translation>Format du fichier de resultats binaire</translation>
</message>
<message>
- <source>INFORMATION_ABOUT_K_EPSILON_MODEL</source>
- <translation>Informations sur le modele K-Epsilon</translation>
+ <source>TEMPERATURE_DELWAQ_FILE</source>
+ <translation>Fichier DELWAQ de la temperature</translation>
</message>
<message>
- <source>FINITE_ELEMENT_ASSEMBLY</source>
- <translation>Assemblage en elements finis</translation>
+ <source>PROPAGATION</source>
+ <translation>Propagation</translation>
</message>
<message>
- <source>INITIAL_DEPTH</source>
- <translation>Hauteur initiale</translation>
+ <source>FINITE_VOLUME_SCHEME</source>
+ <translation>Schema en volumes finis</translation>
</message>
<message>
- <source>SERAFIN</source>
- <translation>SERAFIN</translation>
+ <source>IMPLICITATION_COEFFICIENT_OF_TRACERS</source>
+ <translation>Coefficient d'implicitation des traceurs</translation>
</message>
<message>
- <source>MAXIMUM_NUMBER_OF_ITERATIONS_FOR_DIFFUSION_OF_TRACERS</source>
- <translation>Maximum d'iterations pour la diffusion des traceurs</translation>
+ <source>CORIOLIS_COEFFICIENT</source>
+ <translation>Coefficient de coriolis</translation>
</message>
<message>
- <source>DICTIONARY</source>
- <translation>Dictionnaire</translation>
+ <source>PRESCRIBED_FLOWRATES</source>
+ <translation>Debits imposes</translation>
</message>
<message>
- <source>REFINEMENT_LEVELS</source>
- <translation>Niveaux de raffinement</translation>
+ <source>TURBULENCE_MODEL</source>
+ <translation>Modele de turbulence</translation>
</message>
<message>
- <source>ASCII_DATABASE_FOR_TIDE</source>
- <translation>Base ASCII de donnees de maree</translation>
+ <source>NUMBER_OF_FIRST_TIME_STEP_FOR_LISTING_PRINTOUTS</source>
+ <translation>Numero du premier pas de temps pour les sorties listing</translation>
</message>
<message>
- <source>COUPLING_PERIOD_FOR_SISYPHE</source>
- <translation>Periode de couplage pour sisyphe</translation>
+ <source>PRINTING_CUMULATED_FLOWRATES</source>
+ <translation>Impression du cumul des flux</translation>
</message>
<message>
- <source>STAGE_DISCHARGE_CURVES_FILE</source>
- <translation>Fichier des courbes de tarage</translation>
+ <source>NUMBER_OF_FIRST_TIME_STEP_FOR_GRAPHIC_PRINTOUTS</source>
+ <translation>Numero du premier pas de temps pour les sorties graphiques</translation>
</message>
<message>
- <source>INITIAL_CONDITIONS</source>
- <translation>Conditions initiales</translation>
+ <source>PHYSICAL_CHARACTERISTICS_OF_THE_TSUNAMI</source>
+ <translation>Parametres physiques du tsunami</translation>
</message>
<message>
- <source>OPTION_FOR_THE_DIFFUSION_OF_TRACERS</source>
- <translation>Option pour la diffusion des traceurs</translation>
+ <source>MASS_BALANCE</source>
+ <translation>Bilan de masse</translation>
</message>
<message>
- <source>ACCURACY_OF_EPSILON</source>
- <translation>Precision sur epsilon</translation>
+ <source>BINARY_DATABASE_1_FOR_TIDE</source>
+ <translation>Base binaire 1 de donnees de maree</translation>
</message>
<message>
- <source>AD_NUMBER_OF_DIRECTIONS</source>
- <translation>Ad nombre de directions</translation>
+ <source>SOURCES_FILE</source>
+ <translation>Fichier des sources</translation>
</message>
<message>
- <source>THRESHOLD_DEPTH_FOR_WIND</source>
- <translation>Profondeur limite pour le vent</translation>
+ <source>LAW_OF_TRACERS_DEGRADATION</source>
+ <translation>Loi de degradation des traceurs</translation>
</message>
<message>
- <source>SOLVER_ACCURACY</source>
- <translation>Precision du solveur</translation>
+ <source>SECTIONS_INPUT_FILE</source>
+ <translation>Fichier des sections de controle</translation>
</message>
<message>
- <source>BOUNDARY_CONDITIONS_FILE</source>
- <translation>Fichier des conditions aux limites</translation>
+ <source>CONTROL_SECTIONS</source>
+ <translation>Sections de controle</translation>
</message>
<message>
- <source>BINARY_RESULTS_FILE_FORMAT</source>
- <translation>Format du fichier de resultats binaire</translation>
+ <source>SOLVER_FOR_DIFFUSION_OF_TRACERS</source>
+ <translation>Solveur pour la diffusion des traceurs</translation>
</message>
<message>
- <source>TIDE_GENERATING_FORCE</source>
- <translation>Force generatrice de la maree</translation>
+ <source>RESULTS_FILE_FORMAT</source>
+ <translation>Format du fichier des resultats</translation>
</message>
<message>
- <source>PRESCRIBED_FLOWRATES</source>
- <translation>Debits imposes</translation>
+ <source>SECONDARY_CURRENTS</source>
+ <translation>Courants secondaires</translation>
</message>
<message>
- <source>BINARY_DATABASE_1_FOR_TIDE</source>
- <translation>Base binaire 1 de donnees de maree</translation>
+ <source>BIN</source>
+ <translation>BIN</translation>
</message>
<message>
- <source>LAW_OF_TRACERS_DEGRADATION</source>
- <translation>Loi de degradation des traceurs</translation>
+ <source>OPTION_FOR_INITIAL_ABSTRACTION_RATIO</source>
+ <translation>Option pour ratio des pertes initiales</translation>
</message>
<message>
- <source>SECTIONS_INPUT_FILE</source>
- <translation>Fichier des sections de controle</translation>
+ <source>TYPE_OF_WEIRS</source>
+ <translation>Type des seuils</translation>
</message>
<message>
- <source>MINIMUM_VALUE_OF_DEPTH</source>
- <translation>Valeur minimum de H</translation>
+ <source>NUMBER_OF_SUB_STEPS_OF_DISTRIBUTIVE_SCHEMES</source>
+ <translation>Nombre de sous-pas des schemas distributifs</translation>
</message>
<message>
<source>SPACING_OF_ROUGHNESS_ELEMENTS</source>
<translation>Option du schema pour la convection du K-Epsilon</translation>
</message>
<message>
- <source>LISTING_PRINTOUT_PERIOD</source>
- <translation>Periode de sortie listing</translation>
- </message>
- <message>
- <source>MINOR_CONSTITUENTS_INFERENCE</source>
- <translation>Interpolation de composantes mineures</translation>
+ <source>COUPLING_WITH</source>
+ <translation>Couplage avec</translation>
</message>
<message>
- <source>DELWAQ</source>
- <translation>DELWAQ</translation>
+ <source>LISTING_PRINTOUT_PERIOD</source>
+ <translation>Periode de sortie listing</translation>
</message>
<message>
- <source>SPECIAL</source>
- <translation>SPECIAL</translation>
+ <source>THRESHOLD_DEPTH_FOR_WIND</source>
+ <translation>Profondeur limite pour le vent</translation>
</message>
<message>
- <source>PREVIOUS_COMPUTATION_FILE_FORMAT</source>
- <translation>Format du fichier du calcul precedent</translation>
+ <source>VELOCITY_PROFILES</source>
+ <translation>Profils de vitesse</translation>
</message>
<message>
- <source>VALUES_OF_THE_TRACERS_AT_THE_SOURCES</source>
- <translation>Valeurs des traceurs des sources</translation>
+ <source>ALGAE_TYPE</source>
+ <translation>Type des algues</translation>
</message>
<message>
- <source>BINARY_RESULTS_FILE</source>
- <translation>Fichier de resultats binaire</translation>
+ <source>TREATMENT_OF_FLUXES_AT_THE_BOUNDARIES</source>
+ <translation>Traitement des flux aux frontieres</translation>
</message>
<message>
- <source>EXCHANGE_AREAS_DELWAQ_FILE</source>
- <translation>Fichier DELWAQ des surfaces de flux</translation>
+ <source>MINOR_CONSTITUENTS_INFERENCE</source>
+ <translation>Interpolation de composantes mineures</translation>
</message>
<message>
- <source>IMPLICITATION_FOR_DIFFUSION_OF_VELOCITY</source>
- <translation>Implicitation pour la diffusion des vitesses</translation>
+ <source>STAGE_DISCHARGE_CURVES</source>
+ <translation>Courbes de tarage</translation>
</message>
<message>
- <source>WEIRS_DATA_FILE</source>
- <translation>Fichier de donnees des seuils</translation>
+ <source>GLOBAL_NUMBER_OF_THE_POINT_TO_CALIBRATE_HIGH_WATER</source>
+ <translation>Numero global du point pour caler la pleine mer</translation>
</message>
<message>
- <source>IMPLICITATION_FOR_VELOCITY</source>
- <translation>Implicitation pour la vitesse</translation>
+ <source>RAIN_OR_EVAPORATION_IN_MM_PER_DAY</source>
+ <translation>Pluie ou evaporation en mm par jour</translation>
</message>
<message>
- <source>DEFINITION_OF_ZONES</source>
- <translation>Definition de zones</translation>
+ <source>REFERENCE_FILE_FORMAT</source>
+ <translation>Format du fichier de reference</translation>
</message>
<message>
- <source>LISTING_PRINTOUT</source>
- <translation>Sortie listing</translation>
+ <source>SALINITY_FOR_DELWAQ</source>
+ <translation>Salinite pour DELWAQ</translation>
</message>
<message>
- <source>MEAN_DEPTH_FOR_LINEARIZATION</source>
- <translation>Profondeur moyenne pour la linearisation</translation>
+ <source>DIFFUSIVITY_FOR_DELWAQ</source>
+ <translation>Diffusion pour DELWAQ</translation>
</message>
<message>
- <source>LAW_OF_FRICTION_ON_LATERAL_BOUNDARIES</source>
- <translation>Loi de frottement sur les parois laterales</translation>
+ <source>DELWAQ</source>
+ <translation>DELWAQ</translation>
</message>
<message>
- <source>SCHEME_OPTION_FOR_ADVECTION_OF_VELOCITIES</source>
- <translation>Option du schema pour la convection des vitesses</translation>
+ <source>BOTTOM_SURFACES_DELWAQ_FILE</source>
+ <translation>Fichier DELWAQ des surfaces du fond</translation>
</message>
<message>
- <source>DESIRED_COURANT_NUMBER</source>
- <translation>Nombre de courant souhaite</translation>
+ <source>FORMATTED_DATA_FILE_1</source>
+ <translation>Fichier de donnees formate 1</translation>
</message>
<message>
- <source>SUPG_OPTION</source>
- <translation>Option de SUPG</translation>
+ <source>FORMATTED_DATA_FILE_2</source>
+ <translation>Fichier de donnees formate 2</translation>
</message>
<message>
- <source>STOP_IF_A_STEADY_STATE_IS_REACHED</source>
- <translation>Arret si un etat permanent est atteint</translation>
+ <source>COMPUTATION_CONTINUED</source>
+ <translation>Suite de calcul</translation>
</message>
<message>
- <source>DEFAULT_PARALLEL_EXECUTABLE</source>
- <translation>Executable parallele par defaut</translation>
+ <source>RECORD_NUMBER_IN_WAVE_FILE</source>
+ <translation>Numero de l'enregistrement dans le fichier de Houle</translation>
</message>
<message>
- <source>INFORMATION_ABOUT_SOLVER</source>
- <translation>Informations sur le solveur</translation>
+ <source>C_U_PRECONDITIONING</source>
+ <translation>Preconditionnement C-U</translation>
</message>
<message>
- <source>BINARY_ATMOSPHERIC_DATA_FILE_FORMAT</source>
- <translation>Format du fichier binaire de donnees atmospheriques</translation>
+ <source>LIST_OF_POINTS</source>
+ <translation>Liste de points</translation>
</message>
<message>
- <source>AIR_PRESSURE</source>
- <translation>Pression atmospherique</translation>
+ <source>TYPE_OF_ADVECTION</source>
+ <translation>Forme de la convection</translation>
</message>
<message>
- <source>VERTICAL_FLUXES_DELWAQ_FILE</source>
- <translation>Fichier DELWAQ des flux verticaux</translation>
+ <source>WIND_VELOCITY_ALONG_X</source>
+ <translation>Vitesse du vent suivant X</translation>
</message>
<message>
- <source>TURBULENCE_REGIME_FOR_SOLID_BOUNDARIES</source>
- <translation>Regime de turbulence pour les parois</translation>
+ <source>WIND_VELOCITY_ALONG_Y</source>
+ <translation>Vitesse du vent suivant Y</translation>
</message>
<message>
- <source>DELWAQ_STEERING_FILE</source>
- <translation>Fichier de commande DELWAQ</translation>
+ <source>TOLERANCES_FOR_IDENTIFICATION</source>
+ <translation>Precisions pour l'identification</translation>
</message>
<message>
- <source>ASCII_ATMOSPHERIC_DATA_FILE</source>
- <translation>Fichier ASCII de donnees atmospheriques</translation>
+ <source>PREVIOUS_COMPUTATION_FILE_FORMAT</source>
+ <translation>Format du fichier du calcul precedent</translation>
</message>
<message>
- <source>OPTION_FOR_TIDAL_BOUNDARY_CONDITIONS</source>
- <translation>Option pour les conditions aux limites de maree</translation>
+ <source>METIS</source>
+ <translation>METIS</translation>
</message>
<message>
- <source>PARMETIS</source>
- <translation>PARMETIS</translation>
+ <source>DISCRETIZATIONS_IN_SPACE</source>
+ <translation>Discretisations en espace</translation>
</message>
<message>
- <source>TPXO SATELLITE ALTIMETRY</source>
- <translation>ALTIMETRIE SATELLITE TPXO</translation>
+ <source>BINARY_ATMOSPHERIC_DATA_FILE</source>
+ <translation>Fichier binaire de donnees atmospheriques</translation>
</message>
<message>
- <source>ADVECTION_OF_TRACERS</source>
- <translation>Convection des traceurs</translation>
+ <source>BINARY_RESULTS_FILE</source>
+ <translation>Fichier de resultats binaire</translation>
</message>
- <message>
- <source>DIFFUSION_OF_VELOCITY</source>
- <translation>Diffusion des vitesses</translation>
+ <message>
+ <source>EXCHANGES_BETWEEN_NODES_DELWAQ_FILE</source>
+ <translation>Fichier DELWAQ des echanges entre noeuds</translation>
</message>
<message>
- <source>COEFFICIENT_OF_WIND_INFLUENCE</source>
- <translation>Coefficient d'influence du vent</translation>
+ <source>CONTINUITY_CORRECTION</source>
+ <translation>Correction de continuite</translation>
</message>
<message>
- <source>PRODUCTION_COEFFICIENT_FOR_SECONDARY_CURRENTS</source>
- <translation>Coefficient de production pour courants secondaires</translation>
+ <source>SCHEME_FOR_ADVECTION_OF_VELOCITIES</source>
+ <translation>Schema pour la convection des vitesses</translation>
</message>
<message>
- <source>CONVERGENCE_STUDY</source>
- <translation>Etude de convergence</translation>
+ <source>EXCHANGE_AREAS_DELWAQ_FILE</source>
+ <translation>Fichier DELWAQ des surfaces de flux</translation>
</message>
<message>
- <source>COUPLING_PERIOD_FOR_TOMAWAC</source>
- <translation>Periode de couplage pour TOMAWAC</translation>
+ <source>SISYPHE_STEERING_FILE</source>
+ <translation>Fichier des parametres de sisyphe</translation>
</message>
<message>
- <source>NUMBER_OF_PRIVATE_ARRAYS</source>
- <translation>Nombre de tableaux prives</translation>
+ <source>IMPLICITATION_FOR_DIFFUSION_OF_VELOCITY</source>
+ <translation>Implicitation pour la diffusion des vitesses</translation>
</message>
<message>
- <source>MAXIMUM_NUMBER_OF_FRICTION_DOMAINS</source>
- <translation>Nombre maximum de domaines de frottement</translation>
+ <source>ADVECTION_OF_K_AND_EPSILON</source>
+ <translation>Convection de K et epsilon</translation>
</message>
<message>
- <source>NUMBER_OF_DERIVATIVES</source>
- <translation>Nombre de derivees</translation>
+ <source>FREE_SURFACE_GRADIENT_COMPATIBILITY</source>
+ <translation>Compatibilite du gradient de surface libre</translation>
</message>
<message>
- <source>DURATION</source>
- <translation>Duree du calcul</translation>
+ <source>VALUES_OF_THE_TRACERS_AT_THE_SOURCES</source>
+ <translation>Valeurs des traceurs des sources</translation>
</message>
<message>
- <source>BINARY_DATA_FILE_2_FORMAT</source>
- <translation>Format du fichier de donnees binaire 2</translation>
+ <source>NUMBER_OF_CULVERTS</source>
+ <translation>Nombre de buses</translation>
</message>
<message>
- <source>OPTION_FOR_THE_DIFFUSION_OF_VELOCITIES</source>
- <translation>Option pour la diffusion des vitesses</translation>
+ <source>ZERO ELEVATION</source>
+ <translation>COTE NULLE</translation>
</message>
<message>
- <source>BIN</source>
- <translation>BIN</translation>
+ <source>RELEASE</source>
+ <translation>Numero de version</translation>
</message>
<message>
- <source>MASS_LUMPING_ON_TRACERS</source>
- <translation>Mass-lumping sur les traceurs</translation>
+ <source>AD_NAMES_OF_DERIVATIVES</source>
+ <translation>Ad noms des derivees</translation>
</message>
<message>
- <source>NORTH</source>
- <translation>Nord</translation>
+ <source>LANGUAGE</source>
+ <translation>Langue</translation>
</message>
<message>
- <source>FLUXLINE_INPUT_FILE</source>
- <translation>Fichier de fluxline</translation>
+ <source>NAMES_OF_PRIVATE_VARIABLES</source>
+ <translation>Noms des variables privees</translation>
</message>
<message>
- <source>RAIN_OR_EVAPORATION</source>
- <translation>Pluie ou evaporation</translation>
+ <source>PRECONDITIONING_FOR_DIFFUSION_OF_TRACERS</source>
+ <translation>Preconditionnement pour la diffusion des traceurs</translation>
</message>
<message>
- <source>FRICTION, STEADY</source>
- <translation>FROTTEMENT, PERMANENT</translation>
+ <source>VALIDATION</source>
+ <translation>Validation</translation>
</message>
<message>
- <source>PARTITIONING_TOOL</source>
- <translation>Partitionneur</translation>
+ <source>NUMBER_OF_SIPHONS</source>
+ <translation>Nombre de siphons</translation>
</message>
<message>
- <source>FORMATTED_RESULTS_FILE</source>
- <translation>Fichier de resultats formate</translation>
+ <source>BINARY_ATMOSPHERIC_DATA_FILE_FORMAT</source>
+ <translation>Format du fichier binaire de donnees atmospheriques</translation>
</message>
<message>
- <source>VERTICAL_STRUCTURES</source>
- <translation>Structures verticales</translation>
+ <source>WEIRS_DATA_FILE</source>
+ <translation>Fichier de donnees des seuils</translation>
</message>
<message>
- <source>OPTION_FOR_TSUNAMI_GENERATION</source>
- <translation>Option pour la generation de tsunami</translation>
+ <source>IMPLICITATION_FOR_VELOCITY</source>
+ <translation>Implicitation pour la vitesse</translation>
</message>
<message>
- <source>VARIABLE_TIME_STEP</source>
- <translation>Pas de temps variable</translation>
+ <source>DEFINITION_OF_ZONES</source>
+ <translation>Definition de zones</translation>
</message>
<message>
- <source>PROPAGATION_OPTION</source>
- <translation>Option de propagation</translation>
+ <source>TOMAWAC</source>
+ <translation>TOMAWAC</translation>
</message>
<message>
- <source>REFERENCE_FILE</source>
- <translation>Fichier de reference</translation>
+ <source>LISTING_PRINTOUT</source>
+ <translation>Sortie listing</translation>
</message>
<message>
- <source>TIDAL_DATA_BASE</source>
- <translation>Base de donnees de maree</translation>
+ <source>MEAN_DEPTH_FOR_LINEARIZATION</source>
+ <translation>Profondeur moyenne pour la linearisation</translation>
</message>
<message>
- <source>INITIAL_ELEVATION</source>
- <translation>Cote initiale</translation>
+ <source>COUPLING_PERIOD_FOR_TOMAWAC</source>
+ <translation>Periode de couplage pour TOMAWAC</translation>
</message>
<message>
- <source>STOCHASTIC_DIFFUSION_MODEL</source>
- <translation>Modele de diffusion stochastique</translation>
+ <source>WAVE_ENHANCED_FRICTION_FACTOR</source>
+ <translation>Augmentation du frottement par la houle</translation>
</message>
<message>
- <source>FORTRAN_FILE</source>
- <translation>Fichier fortran</translation>
+ <source>VARIABLES_FOR_GRAPHIC_PRINTOUTS</source>
+ <translation>Variables pour les sorties graphiques</translation>
</message>
<message>
- <source>BREACH</source>
- <translation>Breche</translation>
+ <source>DEPTH_IN_FRICTION_TERMS</source>
+ <translation>Hauteur dans les termes de frottement</translation>
</message>
<message>
- <source>SCOTCH</source>
- <translation>SCOTCH</translation>
+ <source>MASS_LUMPING_ON_H</source>
+ <translation>Mass-lumping sur H</translation>
</message>
<message>
- <source>AD_LINEAR_SOLVER_RESET_DERIVATIVES</source>
- <translation>Ad remise a zero des derivees du solveur lineaire</translation>
+ <source>NUMBER_OF_LAGRANGIAN_DRIFTS</source>
+ <translation>Nombre de derives lagrangiennes</translation>
</message>
<message>
- <source>TIME_STEP</source>
- <translation>Pas de temps</translation>
+ <source>NON_DIMENSIONAL_DISPERSION_COEFFICIENTS</source>
+ <translation>Coefficients adimensionnels de dispersion</translation>
</message>
<message>
- <source>SALINITY_DELWAQ_FILE</source>
- <translation>Fichier DELWAQ de la salinite</translation>
+ <source>FOURIER_ANALYSIS_PERIODS</source>
+ <translation>Periodes d'analyse de fourier</translation>
</message>
<message>
- <source>IMPLICITATION_FOR_DEPTH</source>
- <translation>Implicitation pour la hauteur</translation>
+ <source>VARIABLES_TO_BE_PRINTED</source>
+ <translation>Variables a imprimer</translation>
</message>
<message>
- <source>NUMBER_OF_LAGRANGIAN_DRIFTS</source>
- <translation>Nombre de derives lagrangiennes</translation>
+ <source>EQUATIONS</source>
+ <translation>Equations</translation>
</message>
<message>
- <source>TEMPERATURE_FOR_DELWAQ</source>
- <translation>Temperature pour DELWAQ</translation>
+ <source>MAXIMUM_NUMBER_OF_ITERATIONS_FOR_IDENTIFICATION</source>
+ <translation>Maximum d'iterations pour l'identification</translation>
</message>
<message>
- <source>SECONDARY_CURRENTS</source>
- <translation>Courants secondaires</translation>
+ <source>WIND</source>
+ <translation>Vent</translation>
</message>
<message>
- <source>PRECONDITIONING</source>
- <translation>Preconditionnement</translation>
+ <source>SPEED_AND_DIRECTION_OF_WIND</source>
+ <translation>Vitesse et direction du vent</translation>
</message>
<message>
- <source>STEERING_FILE</source>
- <translation>Fichier des parametres</translation>
+ <source>NAMES_OF_CLANDESTINE_VARIABLES</source>
+ <translation>Noms des variables clandestines</translation>
</message>
<message>
- <source>DURATION_OF_RAIN_OR_EVAPORATION_IN_HOURS</source>
- <translation>Duree de la pluie ou evaporation en heures</translation>
+ <source>GEOMETRY_FILE_FORMAT</source>
+ <translation>Format du fichier de geometrie</translation>
</message>
<message>
- <source>DEBUGGER</source>
- <translation>Debugger</translation>
+ <source>NON_SUBMERGED_VEGETATION_FRICTION</source>
+ <translation>Frottement pour la vegetation non submergee</translation>
</message>
<message>
- <source>LATITUDE_OF_ORIGIN_POINT</source>
- <translation>Latitude du point origine</translation>
+ <source>TYPE_OF_SOURCES</source>
+ <translation>Type des sources</translation>
</message>
<message>
- <source>PRESCRIBED_TRACERS_VALUES</source>
- <translation>Valeurs imposees des traceurs</translation>
+ <source>TIDAL_FLATS</source>
+ <translation>Bancs decouvrants</translation>
</message>
<message>
- <source>PTSCOTCH</source>
- <translation>PTSCOTCH</translation>
+ <source>TITLE</source>
+ <translation>Titre</translation>
</message>
<message>
- <source>CORIOLIS_COEFFICIENT</source>
- <translation>Coefficient de coriolis</translation>
+ <source>ORIGINAL_HOUR_OF_TIME</source>
+ <translation>Heure de l'origine des temps</translation>
</message>
<message>
- <source>TURBULENCE_MODEL</source>
- <translation>Modele de turbulence</translation>
+ <source>LAW_OF_FRICTION_ON_LATERAL_BOUNDARIES</source>
+ <translation>Loi de frottement sur les parois laterales</translation>
</message>
<message>
- <source>NUMBER_OF_FIRST_TIME_STEP_FOR_LISTING_PRINTOUTS</source>
- <translation>Numero du premier pas de temps pour les sorties listing</translation>
+ <source>FRICTION</source>
+ <translation>FROTTEMENT</translation>
</message>
<message>
- <source>PRINTING_CUMULATED_FLOWRATES</source>
- <translation>Impression du cumul des flux</translation>
+ <source>STAGE_DISCHARGE_CURVES_FILE</source>
+ <translation>Fichier des courbes de tarage</translation>
</message>
<message>
- <source>OPTION_FOR_THE_TREATMENT_OF_TIDAL_FLATS</source>
- <translation>Option de traitement des bancs decouvrants</translation>
+ <source>DESIRED_COURANT_NUMBER</source>
+ <translation>Nombre de courant souhaite</translation>
</message>
<message>
- <source>CONTROL_SECTIONS</source>
- <translation>Sections de controle</translation>
+ <source>DISSIPATION_COEFFICIENT_FOR_SECONDARY_CURRENTS</source>
+ <translation>Coefficient de dissipation pour courants secondaires</translation>
</message>
<message>
- <source>SOLVER_FOR_DIFFUSION_OF_TRACERS</source>
- <translation>Solveur pour la diffusion des traceurs</translation>
+ <source>COUPLING_PERIOD_FOR_SISYPHE</source>
+ <translation>Periode de couplage pour sisyphe</translation>
</message>
<message>
- <source>PARTICULIERES</source>
- <translation>PARTICULIERES</translation>
+ <source>ALGAE_TRANSPORT_MODEL</source>
+ <translation>Modele de transport des algues</translation>
</message>
<message>
- <source>OPTION_FOR_INITIAL_ABSTRACTION_RATIO</source>
- <translation>Option pour ratio des pertes initiales</translation>
+ <source>ABSCISSAE_OF_SOURCES</source>
+ <translation>Abscisses des sources</translation>
</message>
<message>
- <source>NUMBER_OF_SUB_STEPS_OF_DISTRIBUTIVE_SCHEMES</source>
- <translation>Nombre de sous-pas des schemas distributifs</translation>
+ <source>LIQUID_BOUNDARIES_FILE</source>
+ <translation>Fichier des frontieres liquides</translation>
</message>
<message>
- <source>UPWIND_COEFFICIENTS</source>
- <translation>Coefficients de decentrement</translation>
+ <source>VELOCITIES_OF_THE_SOURCES_ALONG_X</source>
+ <translation>Vitesses des sources selon X</translation>
</message>
<message>
- <source>ALGAE_TYPE</source>
- <translation>Type des algues</translation>
+ <source>VELOCITIES_OF_THE_SOURCES_ALONG_Y</source>
+ <translation>Vitesses des sources selon Y</translation>
</message>
<message>
- <source>RAIN_OR_EVAPORATION_IN_MM_PER_DAY</source>
- <translation>Pluie ou evaporation en mm par jour</translation>
+ <source>MAXIMUM_NUMBER_OF_SOURCES</source>
+ <translation>Nombre maximum de sources</translation>
</message>
<message>
- <source>MANNING_DEFAULT_VALUE_FOR_COLEBROOK_WHITE_LAW</source>
- <translation>Valeur par defaut du manning pour la loi de colebrook-white</translation>
+ <source>SOLVER_OPTION_FOR_TRACERS_DIFFUSION</source>
+ <translation>Option du solveur pour la diffusion des traceurs</translation>
</message>
<message>
- <source>FORMATTED_DATA_FILE_2</source>
- <translation>Fichier de donnees formate 2</translation>
+ <source>INFORMATION_ABOUT_SOLVER</source>
+ <translation>Informations sur le solveur</translation>
</message>
<message>
- <source>C_U_PRECONDITIONING</source>
- <translation>Preconditionnement C-U</translation>
+ <source>BOUSSINESQ</source>
+ <translation>BOUSSINESQ</translation>
</message>
<message>
- <source>LIST_OF_POINTS</source>
- <translation>Liste de points</translation>
+ <source>BINARY_DATA_FILE_1_FORMAT</source>
+ <translation>Format du fichier de donnees binaire 1</translation>
</message>
<message>
- <source>SCHEME_FOR_ADVECTION_OF_VELOCITIES</source>
- <translation>Schema pour la convection des vitesses</translation>
+ <source>DIAMETRE_OF_ALGAE</source>
+ <translation>Diametre des algues</translation>
</message>
<message>
- <source>NUMBER_OF_FIRST_TIME_STEP_FOR_GRAPHIC_PRINTOUTS</source>
- <translation>Numero du premier pas de temps pour les sorties graphiques</translation>
+ <source>CONSTANT ELEVATION</source>
+ <translation>COTE CONSTANTE</translation>
</message>
<message>
- <source>DEPTH_IN_FRICTION_TERMS</source>
- <translation>Hauteur dans les termes de frottement</translation>
+ <source>COUPLING_DIRECTORY</source>
+ <translation>Dossier de couplage</translation>
</message>
<message>
- <source>FOURIER_ANALYSIS_PERIODS</source>
- <translation>Periodes d'analyse de fourier</translation>
+ <source>DELWAQ_PRINTOUT_PERIOD</source>
+ <translation>Periode de sortie pour DELWAQ</translation>
</message>
<message>
- <source>EQUATIONS</source>
- <translation>Equations</translation>
+ <source>BOTTOM_SMOOTHINGS</source>
+ <translation>Lissages du fond</translation>
</message>
<message>
- <source>MAXIMUM_NUMBER_OF_ITERATIONS_FOR_IDENTIFICATION</source>
- <translation>Maximum d'iterations pour l'identification</translation>
+ <source>AIR_PRESSURE</source>
+ <translation>Pression atmospherique</translation>
</message>
<message>
- <source>WIND</source>
- <translation>Vent</translation>
+ <source>PRESCRIBED_ELEVATIONS</source>
+ <translation>Cotes imposees</translation>
</message>
<message>
- <source>SPEED_AND_DIRECTION_OF_WIND</source>
- <translation>Vitesse et direction du vent</translation>
+ <source>MASS_LUMPING_FOR_WEAK_CHARACTERISTICS</source>
+ <translation>Mass-lumping pour les caracteristiques faibles</translation>
</message>
<message>
- <source>TYPE_OF_SOURCES</source>
- <translation>Type des sources</translation>
+ <source>GRAVITY_ACCELERATION</source>
+ <translation>Acceleration de la pesanteur</translation>
</message>
<message>
- <source>TITLE</source>
- <translation>Titre</translation>
+ <source>LIMIT_VALUES</source>
+ <translation>Valeurs limites</translation>
</message>
<message>
- <source>MASS_LUMPING_ON_H</source>
- <translation>Mass-lumping sur H</translation>
+ <source>RESULTS_FILE</source>
+ <translation>Fichier des resultats</translation>
</message>
<message>
- <source>NUMBER_OF_SUB_ITERATIONS_FOR_NON_LINEARITIES</source>
- <translation>Nombre de sous-iterations pour les non-linearites</translation>
+ <source>SCHEME_OPTION_FOR_ADVECTION_OF_TRACERS</source>
+ <translation>Option du schema pour la convection des traceurs</translation>
</message>
<message>
- <source>PSI_SCHEME_OPTION</source>
- <translation>Option du schema PSI</translation>
+ <source>OPTION_FOR_CHARACTERISTICS</source>
+ <translation>Option pour les caracteristiques</translation>
</message>
<message>
- <source>LIQUID_BOUNDARIES_FILE</source>
- <translation>Fichier des frontieres liquides</translation>
+ <source>OPTION_FOR_THE_TREATMENT_OF_TIDAL_FLATS</source>
+ <translation>Option de traitement des bancs decouvrants</translation>
</message>
<message>
- <source>VELOCITIES_OF_THE_SOURCES_ALONG_X</source>
- <translation>Vitesses des sources selon X</translation>
+ <source>TIME_RANGE_FOR_FOURIER_ANALYSIS</source>
+ <translation>Bornes en temps pour l'analyse de fourier</translation>
</message>
<message>
- <source>VELOCITIES_OF_THE_SOURCES_ALONG_Y</source>
- <translation>Vitesses des sources selon Y</translation>
+ <source>VERTICAL_FLUXES_DELWAQ_FILE</source>
+ <translation>Fichier DELWAQ des flux verticaux</translation>
</message>
<message>
- <source>BOUSSINESQ</source>
- <translation>BOUSSINESQ</translation>
+ <source>ORDINATES_OF_SOURCES</source>
+ <translation>Ordonnees des sources</translation>
</message>
<message>
- <source>TOMAWAC</source>
- <translation>TOMAWAC</translation>
+ <source>SERAFIN</source>
+ <translation>SERAFIN</translation>
</message>
<message>
- <source>BOTTOM_SMOOTHINGS</source>
- <translation>Lissages du fond</translation>
+ <source>MAXIMUM_NUMBER_OF_TRACERS</source>
+ <translation>Nombre maximum de traceurs</translation>
</message>
<message>
- <source>SALINITY_FOR_DELWAQ</source>
- <translation>Salinite pour DELWAQ</translation>
+ <source>TURBULENCE_REGIME_FOR_SOLID_BOUNDARIES</source>
+ <translation>Regime de turbulence pour les parois</translation>
</message>
<message>
- <source>OPTION_FOR_CHARACTERISTICS</source>
- <translation>Option pour les caracteristiques</translation>
+ <source>LOCAL_NUMBER_OF_THE_POINT_TO_CALIBRATE_HIGH_WATER</source>
+ <translation>Numero local du point pour caler la pleine mer</translation>
</message>
<message>
- <source>MAXIMUM_NUMBER_OF_TRACERS</source>
- <translation>Nombre maximum de traceurs</translation>
+ <source>NODES_DISTANCES_DELWAQ_FILE</source>
+ <translation>Fichier DELWAQ des distances entre noeuds</translation>
</message>
<message>
- <source>ZERO</source>
- <translation>Zero</translation>
+ <source>NUMBER_OF_DROGUES</source>
+ <translation>Nombre de flotteurs</translation>
</message>
<message>
- <source>OPTION_FOR_WIND</source>
- <translation>Option du vent</translation>
+ <source>SOLVER_FOR_K_EPSILON_MODEL</source>
+ <translation>Solveur pour le modele K-Epsilon</translation>
</message>
<message>
- <source>BINARY_DATA_FILE_1</source>
- <translation>Fichier de donnees binaire 1</translation>
+ <source>SECTIONS_OUTPUT_FILE</source>
+ <translation>Fichier de sortie des sections de controle</translation>
</message>
<message>
- <source>BINARY_DATA_FILE_2</source>
- <translation>Fichier de donnees binaire 2</translation>
+ <source>HARMONIC_CONSTANTS_FILE</source>
+ <translation>Fichier des constantes harmoniques</translation>
</message>
<message>
- <source>PRESCRIBED_VELOCITIES</source>
- <translation>Vitesses imposees</translation>
+ <source>OPTION_FOR_CULVERTS</source>
+ <translation>Option pour les buses</translation>
</message>
<message>
- <source>VELOCITY_DELWAQ_FILE</source>
- <translation>Fichier DELWAQ de la vitesse</translation>
+ <source>ASCII_ATMOSPHERIC_DATA_FILE</source>
+ <translation>Fichier ASCII de donnees atmospheriques</translation>
</message>
<message>
- <source>ZERO DEPTH</source>
- <translation>HAUTEUR NULLE</translation>
+ <source>INITIAL_ELEVATION</source>
+ <translation>Cote initiale</translation>
</message>
<message>
- <source>COMPATIBLE_COMPUTATION_OF_FLUXES</source>
- <translation>Calcul compatible des flux</translation>
+ <source>ZERO</source>
+ <translation>Zero</translation>
</message>
<message>
- <source>NUMBER_OF_TRACERS</source>
- <translation>Nombre de traceurs</translation>
+ <source>BREACHES_DATA_FILE</source>
+ <translation>Fichier de donnees des breches</translation>
</message>
<message>
- <source>ACCURACY_OF_SPALART_ALLMARAS</source>
- <translation>Precision sur spalart-allmaras</translation>
+ <source>OPTION_FOR_WIND</source>
+ <translation>Option du vent</translation>
</message>
<message>
- <source>PARTICULAR</source>
- <translation>PARTICULAR</translation>
+ <source>OPTION_OF_THE_HYDROSTATIC_RECONSTRUCTION</source>
+ <translation>Option de la reconstrucion Hydrostatique</translation>
</message>
<message>
- <source>COUPLING_DIRECTORY</source>
- <translation>Dossier de couplage</translation>
+ <source>SERAFIND</source>
+ <translation>SERAFIND</translation>
</message>
<message>
- <source>DEFAULT_EXECUTABLE</source>
- <translation>Executable par defaut</translation>
+ <source>NUMBER_OF_TRACERS</source>
+ <translation>Nombre de traceurs</translation>
</message>
<message>
- <source>GEOMETRY_FILE</source>
- <translation>Fichier de geometrie</translation>
+ <source>DIFFUSIVITY_DELWAQ_FILE</source>
+ <translation>Fichier DELWAQ de la diffusion</translation>
</message>
<message>
- <source>VARIABLES_FOR_GRAPHIC_PRINTOUTS</source>
- <translation>Variables pour les sorties graphiques</translation>
+ <source>TPXO SATELLITE ALTIMETRY</source>
+ <translation>ALTIMETRIE SATELLITE TPXO</translation>
</message>
<message>
- <source>NEWMARK_TIME_INTEGRATION_COEFFICIENT</source>
- <translation>Coefficient d'integration en temps de newmark</translation>
+ <source>ADVECTION_OF_TRACERS</source>
+ <translation>Convection des traceurs</translation>
</message>
<message>
- <source>OIL_SPILL_STEERING_FILE</source>
- <translation>Fichier de commandes hydrocarbures</translation>
+ <source>MED</source>
+ <translation>MED</translation>
</message>
<message>
- <source>MAXIMUM_NUMBER_OF_BOUNDARIES</source>
- <translation>Nombre maximum de frontieres</translation>
+ <source>SOLVER_OPTION</source>
+ <translation>Option du solveur</translation>
</message>
<message>
- <source>DIFFUSIVITY_DELWAQ_FILE</source>
- <translation>Fichier DELWAQ de la diffusion</translation>
+ <source>MATRIX_STORAGE</source>
+ <translation>Stockage des matrices</translation>
</message>
<message>
- <source>NON_DIMENSIONAL_DISPERSION_COEFFICIENTS</source>
- <translation>Coefficients adimensionnels de dispersion</translation>
+ <source>COEFFICIENT_TO_CALIBRATE_TIDAL_RANGE</source>
+ <translation>Coefficient de calage du marnage</translation>
</message>
<message>
- <source>NUMBER_OF_WEIRS</source>
- <translation>Nombre de seuils</translation>
+ <source>BINARY_DATA_FILE_1</source>
+ <translation>Fichier de donnees binaire 1</translation>
</message>
<message>
- <source>EXCHANGES_BETWEEN_NODES_DELWAQ_FILE</source>
- <translation>Fichier DELWAQ des echanges entre noeuds</translation>
+ <source>BINARY_DATA_FILE_2</source>
+ <translation>Fichier de donnees binaire 2</translation>
</message>
<message>
- <source>SOLVER_OPTION_FOR_TRACERS_DIFFUSION</source>
- <translation>Option du solveur pour la diffusion des traceurs</translation>
+ <source>CONTROL_OF_LIMITS</source>
+ <translation>Controle des limites</translation>
</message>
<message>
- <source>INITIAL_VALUES_OF_TRACERS</source>
- <translation>Valeurs initiales des traceurs</translation>
+ <source>RECORD_NUMBER_FOR_RESTART</source>
+ <translation>Enregistrement pour suite de calcul</translation>
</message>
<message>
- <source>LONGITUDE_OF_ORIGIN_POINT</source>
- <translation>Longitude du point origine</translation>
+ <source>NUMBER_OF_GAUSS_POINTS_FOR_WEAK_CHARACTERISTICS</source>
+ <translation>Nombre de points de Gauss pour les caracteristiques faibles</translation>
</message>
<message>
- <source>MAXIMUM_NUMBER_OF_ITERATIONS_FOR_SOLVER</source>
- <translation>Maximum d'iterations pour le solveur</translation>
+ <source>COEFFICIENT_OF_WIND_INFLUENCE</source>
+ <translation>Coefficient d'influence du vent</translation>
</message>
<message>
- <source>CORIOLIS</source>
- <translation>Coriolis</translation>
+ <source>PRECONDITIONING_FOR_K_EPSILON_MODEL</source>
+ <translation>Preconditionnement pour le modele K-Epsilon</translation>
</message>
<message>
- <source>ADVECTION</source>
- <translation>Convection</translation>
+ <source>PRODUCTION_COEFFICIENT_FOR_SECONDARY_CURRENTS</source>
+ <translation>Coefficient de production pour courants secondaires</translation>
</message>
<message>
- <source>INFORMATION_ABOUT_SPALART_ALLMARAS_MODEL</source>
- <translation>Information sur le modele spalart-allmaras</translation>
+ <source>MINIMUM_VALUE_OF_DEPTH</source>
+ <translation>Valeur minimum de H</translation>
</message>
<message>
- <source>ABSCISSAE_OF_SOURCES</source>
- <translation>Abscisses des sources</translation>
+ <source>ELEMENTS_MASKED_BY_USER</source>
+ <translation>Elements masques par l'utilisateur</translation>
</message>
<message>
- <source>VECTOR_LENGTH</source>
- <translation>Longueur du vecteur</translation>
+ <source>FRICTION_COEFFICIENT</source>
+ <translation>Coefficient de frottement</translation>
</message>
<message>
- <source>GRAPHIC_PRINTOUT_PERIOD</source>
- <translation>Periode pour les sorties graphiques</translation>
+ <source>PRESCRIBED_VELOCITIES</source>
+ <translation>Vitesses imposees</translation>
</message>
<message>
- <source>COUPLING_WITH</source>
- <translation>Couplage avec</translation>
+ <source>NAMES_OF_TRACERS</source>
+ <translation>Noms des traceurs</translation>
</message>
<message>
- <source>CONSTANT DEPTH</source>
- <translation>HAUTEUR CONSTANTE</translation>
+ <source>SPECIAL</source>
+ <translation>SPECIAL</translation>
</message>
<message>
- <source>WATER_DISCHARGE_OF_SOURCES</source>
- <translation>Debits des sources</translation>
+ <source>VELOCITY_DELWAQ_FILE</source>
+ <translation>Fichier DELWAQ de la vitesse</translation>
</message>
<message>
- <source>ADVECTION_OF_U_AND_V</source>
- <translation>Convection de U et V</translation>
+ <source>H_CLIPPING</source>
+ <translation>Clipping de H</translation>
</message>
<message>
- <source>ANTECEDENT_MOISTURE_CONDITIONS</source>
- <translation>Conditions d'humidite precedente</translation>
+ <source>ZONE_NUMBER_IN_GEOGRAPHIC_SYSTEM</source>
+ <translation>Numero de fuseau ou projection dans le systeme geographique</translation>
</message>
<message>
- <source>VOLUMES_DELWAQ_FILE</source>
- <translation>Fichier DELWAQ des volumes</translation>
+ <source>SUPG_OPTION</source>
+ <translation>Option de SUPG</translation>
</message>
<message>
- <source>VELOCITY_FOR_DELWAQ</source>
- <translation>Vitesse pour DELWAQ</translation>
+ <source>PARAMETER_ESTIMATION</source>
+ <translation>Estimation de parametre</translation>
</message>
<message>
- <source>ROUGHNESS_COEFFICIENT_OF_BOUNDARIES</source>
- <translation>Coefficient de rugosite des bords</translation>
+ <source>CHECKING_THE_MESH</source>
+ <translation>Verification du maillage</translation>
</message>
<message>
- <source>INITIAL_TIME_SET_TO_ZERO</source>
- <translation>Remise a zero du temps</translation>
+ <source>AD_NUMBER_OF_DERIVATIVES</source>
+ <translation>Ad nombre de derivees</translation>
</message>
<message>
- <source>INITIAL_GUESS_FOR_U</source>
- <translation>Ordre du tir initial pour U</translation>
+ <source>COMPATIBLE_COMPUTATION_OF_FLUXES</source>
+ <translation>Calcul compatible des flux</translation>
</message>
<message>
- <source>SCHEME_FOR_ADVECTION_OF_K_EPSILON</source>
- <translation>Schema pour la convection du K-Epsilon</translation>
+ <source>LIST_OF_FILES</source>
+ <translation>Liste des fichiers</translation>
</message>
<message>
- <source>TEMPERATURE_DELWAQ_FILE</source>
- <translation>Fichier DELWAQ de la temperature</translation>
+ <source>NUMBER_OF_PRIVATE_ARRAYS</source>
+ <translation>Nombre de tableaux prives</translation>
</message>
<message>
- <source>SOURCES_FILE</source>
- <translation>Fichier des sources</translation>
+ <source>MAXIMUM_NUMBER_OF_FRICTION_DOMAINS</source>
+ <translation>Nombre maximum de domaines de frottement</translation>
</message>
<message>
- <source>CONTROL_OF_LIMITS</source>
- <translation>Controle des limites</translation>
+ <source>DURATION</source>
+ <translation>Duree du calcul</translation>
</message>
<message>
- <source>NUMBER_OF_GAUSS_POINTS_FOR_WEAK_CHARACTERISTICS</source>
- <translation>Nombre de points de Gauss pour les caracteristiques faibles</translation>
+ <source>DELWAQ_STEERING_FILE</source>
+ <translation>Fichier de commande DELWAQ</translation>
</message>
<message>
- <source>TYPE_OF_WEIRS</source>
- <translation>Type des seuils</translation>
+ <source>COEFFICIENT_1_FOR_LAW_OF_TRACERS_DEGRADATION</source>
+ <translation>Coefficient 1 de la loi de degradation des traceurs</translation>
</message>
<message>
- <source>THRESHOLD_FOR_NEGATIVE_DEPTHS</source>
- <translation>Seuil pour les profondeurs negatives</translation>
+ <source>ACCURACY_OF_K</source>
+ <translation>Precision sur k</translation>
</message>
<message>
- <source>FORMATTED_DATA_FILE_1</source>
- <translation>Fichier de donnees formate 1</translation>
+ <source>PARTICULAR</source>
+ <translation>PARTICULAR</translation>
</message>
<message>
- <source>VELOCITY_PROFILES</source>
- <translation>Profils de vitesse</translation>
+ <source>WATER_QUALITY_PROCESS</source>
+ <translation>Processus qualite d'eau</translation>
</message>
<message>
- <source>LANGUAGE</source>
- <translation>Langue</translation>
+ <source>ADVECTION_OF_H</source>
+ <translation>Convection de H</translation>
</message>
<message>
- <source>STAGE_DISCHARGE_CURVES</source>
- <translation>Courbes de tarage</translation>
+ <source>SCHEME_FOR_ADVECTION_OF_TRACERS</source>
+ <translation>Schema pour la convection des traceurs</translation>
</message>
<message>
- <source>COST_FUNCTION</source>
- <translation>Fonction cout</translation>
+ <source>BINARY_DATA_FILE_2_FORMAT</source>
+ <translation>Format du fichier de donnees binaire 2</translation>
</message>
<message>
- <source>ORIGIN_COORDINATES</source>
- <translation>Coordonnees de l'origine</translation>
+ <source>COEFFICIENT_TO_CALIBRATE_SEA_LEVEL</source>
+ <translation>Coefficient de calage du niveau de mer</translation>
</message>
<message>
- <source>RECORD_NUMBER_IN_WAVE_FILE</source>
- <translation>Numero de l'enregistrement dans le fichier de Houle</translation>
+ <source>OPTION_FOR_THE_DIFFUSION_OF_VELOCITIES</source>
+ <translation>Option pour la diffusion des vitesses</translation>
</message>
<message>
- <source>TYPE_OF_ADVECTION</source>
- <translation>Forme de la convection</translation>
+ <source>INITIAL_GUESS_FOR_H</source>
+ <translation>Ordre du tir initial pour H</translation>
</message>
<message>
- <source>WIND_VELOCITY_ALONG_X</source>
- <translation>Vitesse du vent suivant X</translation>
+ <source>MASS_LUMPING_ON_TRACERS</source>
+ <translation>Mass-lumping sur les traceurs</translation>
</message>
<message>
- <source>WIND_VELOCITY_ALONG_Y</source>
- <translation>Vitesse du vent suivant Y</translation>
+ <source>OPTION_FOR_LIQUID_BOUNDARIES</source>
+ <translation>Option pour les frontieres liquides</translation>
</message>
<message>
- <source>MAXIMUM_NUMBER_OF_SOURCES</source>
- <translation>Nombre maximum de sources</translation>
+ <source>GEOMETRY_FILE</source>
+ <translation>Fichier de geometrie</translation>
</message>
<message>
- <source>DISCRETIZATIONS_IN_SPACE</source>
- <translation>Discretisations en espace</translation>
+ <source>WAQTEL_STEERING_FILE</source>
+ <translation>Fichier des parametres de waqtel</translation>
</message>
<message>
- <source>SISYPHE_STEERING_FILE</source>
- <translation>Fichier des parametres de sisyphe</translation>
+ <source>MAXIMUM_NUMBER_OF_ITERATIONS_FOR_ADVECTION_SCHEMES</source>
+ <translation>Maximum d'iterations pour les schemas de convection</translation>
</message>
<message>
- <source>ADVECTION_OF_K_AND_EPSILON</source>
- <translation>Convection de K et epsilon</translation>
+ <source>FLUXLINE_INPUT_FILE</source>
+ <translation>Fichier de fluxline</translation>
</message>
<message>
- <source>NUMBER_OF_CULVERTS</source>
- <translation>Nombre de buses</translation>
+ <source>RAIN_OR_EVAPORATION</source>
+ <translation>Pluie ou evaporation</translation>
</message>
<message>
- <source>RELEASE</source>
- <translation>Numero de version</translation>
+ <source>LAW_OF_BOTTOM_FRICTION</source>
+ <translation>Loi de frottement sur le fond</translation>
</message>
<message>
- <source>PRECONDITIONING_FOR_DIFFUSION_OF_TRACERS</source>
- <translation>Preconditionnement pour la diffusion des traceurs</translation>
+ <source>MATRIX_VECTOR_PRODUCT</source>
+ <translation>Produit matrice-vecteur</translation>
</message>
<message>
- <source>VALIDATION</source>
- <translation>Validation</translation>
+ <source>ACCURACY_FOR_DIFFUSION_OF_TRACERS</source>
+ <translation>Precision pour la diffusion des traceurs</translation>
</message>
<message>
- <source>WAVE_ENHANCED_FRICTION_FACTOR</source>
- <translation>Augmentation du frottement par la houle</translation>
+ <source>MEAN_TEMPERATURE</source>
+ <translation>Temperature moyenne</translation>
</message>
<message>
- <source>TREATMENT_OF_THE_LINEAR_SYSTEM</source>
- <translation>Traitement du systeme lineaire</translation>
+ <source>FRICTION, STEADY</source>
+ <translation>FROTTEMENT, PERMANENT</translation>
</message>
<message>
- <source>VARIABLES_TO_BE_PRINTED</source>
- <translation>Variables a imprimer</translation>
+ <source>PARTITIONING_TOOL</source>
+ <translation>Partitionneur</translation>
</message>
<message>
- <source>DENSITY_OF_ALGAE</source>
- <translation>Masse volumique des algues</translation>
+ <source>MAXIMUM_NUMBER_OF_BOUNDARIES</source>
+ <translation>Nombre maximum de frontieres</translation>
</message>
<message>
- <source>NON_SUBMERGED_VEGETATION_FRICTION</source>
- <translation>Frottement pour la vegetation non submergee</translation>
+ <source>OPTION_FOR_THE_SOLVER_FOR_K_EPSILON_MODEL</source>
+ <translation>Option du solveur pour le modele K-Epsilon</translation>
</message>
<message>
- <source>TIDAL_FLATS</source>
- <translation>Bancs decouvrants</translation>
+ <source>SAINT-VENANT FV</source>
+ <translation>SAINT-VENANT VF</translation>
</message>
<message>
- <source>FRICTION</source>
- <translation>FROTTEMENT</translation>
+ <source>SPATIAL_PROJECTION_TYPE</source>
+ <translation>Type de projection spatiale</translation>
</message>
<message>
- <source>HARMONIC_CONSTANTS_FILE</source>
- <translation>Fichier des constantes harmoniques</translation>
+ <source>THRESHOLD_FOR_NEGATIVE_DEPTHS</source>
+ <translation>Seuil pour les profondeurs negatives</translation>
</message>
<message>
- <source>SERAFIN?</source>
- <translation>SERAFIN?</translation>
+ <source>DEFAULT_PARALLEL_EXECUTABLE</source>
+ <translation>Executable parallele par defaut</translation>
</message>
<message>
- <source>BINARY_DATA_FILE_1_FORMAT</source>
- <translation>Format du fichier de donnees binaire 1</translation>
+ <source>INITIAL_GUESS_FOR_U</source>
+ <translation>Ordre du tir initial pour U</translation>
</message>
<message>
- <source>PRESCRIBED_ELEVATIONS</source>
- <translation>Cotes imposees</translation>
+ <source>DIFFUSION_OF_TRACERS</source>
+ <translation>Diffusion des traceurs</translation>
</message>
<message>
- <source>LIMIT_VALUES</source>
- <translation>Valeurs limites</translation>
+ <source>DEFAULT_EXECUTABLE</source>
+ <translation>Executable par defaut</translation>
</message>
<message>
- <source>RESULTS_FILE</source>
- <translation>Fichier des resultats</translation>
+ <source>FORMATTED_RESULTS_FILE</source>
+ <translation>Fichier de resultats formate</translation>
</message>
<message>
- <source>ORDINATES_OF_SOURCES</source>
- <translation>Ordonnees des sources</translation>
+ <source>VALUES_OF_TRACERS_IN_THE_RAIN</source>
+ <translation>Valeurs des traceurs dans la pluie</translation>
</message>
<message>
- <source>NUMBER_OF_DROGUES</source>
- <translation>Nombre de flotteurs</translation>
+ <source>VERTICAL_STRUCTURES</source>
+ <translation>Structures verticales</translation>
</message>
<message>
- <source>PROPAGATION</source>
- <translation>Propagation</translation>
+ <source>MAXIMUM_NUMBER_OF_ITERATIONS_FOR_K_AND_EPSILON</source>
+ <translation>Maximum d'iterations pour k et epsilon</translation>
</message>
<message>
- <source>OPTION_OF_THE_HYDROSTATIC_RECONSTRUCTION</source>
- <translation>Option de la reconstrucion Hydrostatique</translation>
+ <source>UPWIND_COEFFICIENTS</source>
+ <translation>Coefficients de decentrement</translation>
</message>
<message>
- <source>SERAFIND</source>
- <translation>SERAFIND</translation>
+ <source>FRICTION_DATA</source>
+ <translation>Donnees pour le frottement</translation>
</message>
<message>
- <source>MED</source>
- <translation>MED</translation>
+ <source>NUMBER_OF_WEIRS</source>
+ <translation>Nombre de seuils</translation>
</message>
<message>
- <source>SOLVER_OPTION</source>
- <translation>Option du solveur</translation>
+ <source>OPTION_FOR_TSUNAMI_GENERATION</source>
+ <translation>Option pour la generation de tsunami</translation>
</message>
<message>
- <source>MATRIX_STORAGE</source>
- <translation>Stockage des matrices</translation>
+ <source>VARIABLE_TIME_STEP</source>
+ <translation>Pas de temps variable</translation>
</message>
<message>
- <source>COEFFICIENT_TO_CALIBRATE_TIDAL_RANGE</source>
- <translation>Coefficient de calage du marnage</translation>
+ <source>WAVE_DRIVEN_CURRENTS</source>
+ <translation>Courants de Houle</translation>
</message>
<message>
- <source>RAINFALL_RUNOFF_MODEL</source>
- <translation>Modele pluie-debit</translation>
+ <source>INFORMATION_ABOUT_K_EPSILON_MODEL</source>
+ <translation>Informations sur le modele K-Epsilon</translation>
</message>
<message>
- <source>AD_SYMBOLIC_LINEAR_SOLVER</source>
- <translation>Ad solveur lineaire symbolique</translation>
+ <source>ZONES_FILE</source>
+ <translation>Fichier des zones</translation>
</message>
<message>
- <source>SOLVER</source>
- <translation>Solveur</translation>
+ <source>SPHERICAL_COORDINATES</source>
+ <translation>Coordonnees spheriques</translation>
</message>
<message>
- <source>RECORD_NUMBER_FOR_RESTART</source>
- <translation>Enregistrement pour suite de calcul</translation>
+ <source>NORTH</source>
+ <translation>Nord</translation>
</message>
<message>
- <source>PRECONDITIONING_FOR_K_EPSILON_MODEL</source>
- <translation>Preconditionnement pour le modele K-Epsilon</translation>
+ <source>TREATMENT_OF_THE_LINEAR_SYSTEM</source>
+ <translation>Traitement du systeme lineaire</translation>
</message>
<message>
- <source>ZERO ELEVATION</source>
- <translation>COTE NULLE</translation>
+ <source>REFERENCE_FILE</source>
+ <translation>Fichier de reference</translation>
</message>
<message>
- <source>ACCURACY_OF_K</source>
- <translation>Precision sur k</translation>
+ <source>DENSITY_EFFECTS</source>
+ <translation>Effets de densite</translation>
</message>
<message>
- <source>WATER_QUALITY_PROCESS</source>
- <translation>Processus qualite d'eau</translation>
+ <source>ASCII_DATABASE_FOR_TIDE</source>
+ <translation>Base ASCII de donnees de maree</translation>
</message>
<message>
- <source>OPTION_FOR_LIQUID_BOUNDARIES</source>
- <translation>Option pour les frontieres liquides</translation>
+ <source>THRESHOLD_DEPTH_FOR_RECEDING_PROCEDURE</source>
+ <translation>Profondeur limite pour procedure de ressuyage</translation>
</message>
<message>
- <source>COEFFICIENT_TO_CALIBRATE_SEA_LEVEL</source>
- <translation>Coefficient de calage du niveau de mer</translation>
+ <source>OIL_SPILL_MODEL</source>
+ <translation>Modele de nappes d'hydrocarbures</translation>
</message>
<message>
- <source>NUMBER_OF_SIPHONS</source>
- <translation>Nombre de siphons</translation>
+ <source>SOLVER</source>
+ <translation>Solveur</translation>
</message>
<message>
- <source>INITIAL_GUESS_FOR_H</source>
- <translation>Ordre du tir initial pour H</translation>
+ <source>TIME_STEP_REDUCTION_FOR_K_EPSILON_MODEL</source>
+ <translation>Reduction du pas de temps pour le modele K-Epsilon</translation>
</message>
<message>
- <source>FRICTION_COEFFICIENT</source>
- <translation>Coefficient de frottement</translation>
+ <source>STOCHASTIC_DIFFUSION_MODEL</source>
+ <translation>Modele de diffusion stochastique</translation>
</message>
<message>
- <source>SPHERICAL_COORDINATES</source>
- <translation>Coordonnees spheriques</translation>
+ <source>ORIGINAL_DATE_OF_TIME</source>
+ <translation>Date de l'origine des temps</translation>
</message>
<message>
- <source>THICKNESS_OF_ALGAE</source>
- <translation>Epaisseur des algues</translation>
+ <source>GEOGRAPHIC_SYSTEM</source>
+ <translation>Systeme geographique</translation>
</message>
<message>
- <source>MEAN_TEMPERATURE</source>
- <translation>Temperature moyenne</translation>
+ <source>FORTRAN_FILE</source>
+ <translation>Fichier fortran</translation>
</message>
<message>
- <source>IDENTIFICATION_METHOD</source>
- <translation>Methode d'identification</translation>
+ <source>PROPAGATION_OPTION</source>
+ <translation>Option de propagation</translation>
</message>
<message>
- <source>MASS_LUMPING_ON_VELOCITY</source>
- <translation>Mass-lumping sur la vitesse</translation>
+ <source>OIL_SPILL_STEERING_FILE</source>
+ <translation>Fichier de commandes hydrocarbures</translation>
</message>
<message>
- <source>VALUES_OF_TRACERS_IN_THE_RAIN</source>
- <translation>Valeurs des traceurs dans la pluie</translation>
+ <source>TIDAL_DATA_BASE</source>
+ <translation>Base de donnees de maree</translation>
</message>
<message>
- <source>MAXIMUM_NUMBER_OF_ITERATIONS_FOR_K_AND_EPSILON</source>
- <translation>Maximum d'iterations pour k et epsilon</translation>
+ <source>TIDAL_MODEL_FILE</source>
+ <translation>Fichier du modele de maree</translation>
</message>
<message>
- <source>WAVE_DRIVEN_CURRENTS</source>
- <translation>Courants de Houle</translation>
+ <source>BREACH</source>
+ <translation>Breche</translation>
</message>
<message>
- <source>OIL_SPILL_MODEL</source>
- <translation>Modele de nappes d'hydrocarbures</translation>
+ <source>SISYPHE</source>
+ <translation>SISYPHE</translation>
</message>
<message>
- <source>ORIGINAL_DATE_OF_TIME</source>
- <translation>Date de l'origine des temps</translation>
+ <source>TREATMENT_OF_NEGATIVE_DEPTHS</source>
+ <translation>Traitement des hauteurs negatives</translation>
</message>
<message>
- <source>GEOGRAPHIC_SYSTEM</source>
- <translation>Systeme geographique</translation>
+ <source>SCOTCH</source>
+ <translation>SCOTCH</translation>
</message>
<message>
- <source>TIDAL_MODEL_FILE</source>
- <translation>Fichier du modele de maree</translation>
+ <source>INITIAL_VALUES_OF_TRACERS</source>
+ <translation>Valeurs initiales des traceurs</translation>
</message>
</context>
</TS>
