SalomeDXFPLUGINConfig.cmake.in

   1 # Config file for the @PROJECT_NAME@ package
   2 # It defines the following variables:
   3 # Specific to the pacakge @PROJECT_NAME@ itself:
   4 #   @PROJECT_NAME_UC@_ROOT_DIR_EXP - the root path of the installation providing this CMake file
   5 #
   6
   7 ###############################################################
   8 # Copyright (C) 2014-2016  OPEN CASCADE
   9 #
  10 # This library is free software; you can redistribute it and/or
  11 # modify it under the terms of the GNU Lesser General Public
  12 # License as published by the Free Software Foundation; either
  13 # version 2.1 of the License, or (at your option) any later version.
  14 #
  15 # This library is distributed in the hope that it will be useful,
  16 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  17 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  18 # Lesser General Public License for more details.
  19 #
  20 # You should have received a copy of the GNU Lesser General Public
  21 # License along with this library; if not, write to the Free Software
  22 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  23 #
  24 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  25 #
  26
  27 ### Initialisation performed by CONFIGURE_PACKAGE_CONFIG_FILE:
  28 @PACKAGE_INIT@
  29
  30 # Load the dependencies for the libraries of @PROJECT_NAME@
  31 # (contains definitions for IMPORTED targets). This is only
  32 # imported if we are not built as a subproject (in this case targets are already there)
  33 IF(NOT TARGET DXFPluginEngine AND NOT @PROJECT_NAME@_BINARY_DIR)
  34   INCLUDE("@PACKAGE_SALOME_INSTALL_CMAKE_LOCAL@/@PROJECT_NAME@Targets.cmake")
  35 ENDIF()
  36
  37 # Package root dir:
  38 SET_AND_CHECK(DXFPLUGIN_ROOT_DIR_EXP "@PACKAGE_CMAKE_INSTALL_PREFIX@")
  39
  40 # Include directories
  41 SET_AND_CHECK(DXFPLUGIN_INCLUDE_DIRS "${DXFPLUGIN_ROOT_DIR_EXP}/@SALOME_INSTALL_HEADERS@")
  42 SET(DXFPLUGIN_INCLUDE_DIRS "${DXFPLUGIN_INCLUDE_DIRS};@_SalomeDXFPLUGIN_EXTRA_HEADERS@")
  43
  44 # Package specific environment variables
  45 @_SalomeDXFPLUGIN_EXTRA_ENV_FULL@
  46
  47 #### Now the specificities
  48
  49 # Options exported by the package:
  50 SET(SALOME_DXFPLUGIN_BUILD_DOC   @SALOME_BUILD_DOC@)
  51 SET(SALOME_DXFPLUGIN_BUILD_TESTS @SALOME_BUILD_TESTS@)
  52 SET(SALOME_DXFPLUGIN_BUILD_GUI   @SALOME_BUILD_GUI@)
  53
  54 # Level 1 prerequisites:
  55 SET_AND_CHECK(KERNEL_ROOT_DIR_EXP "@PACKAGE_KERNEL_ROOT_DIR@")
  56 SET_AND_CHECK(GUI_ROOT_DIR_EXP "@PACKAGE_GUI_ROOT_DIR@")
  57 SET_AND_CHECK(GEOM_ROOT_DIR_EXP "@PACKAGE_GEOM_ROOT_DIR@")
  58 SET_AND_CHECK(DXF_ROOT_DIR_EXP "@PACKAGE_DXF_ROOT_DIR@")
  59 SET_AND_CHECK(OCCLICENSE_ROOT_DIR_EXP "@PACKAGE_OCCLICENSE_ROOT_DIR@")
  60
  61 # For all prerequisites, load the corresponding targets if the package was used
  62 # in CONFIG mode. This ensures dependent projects link correctly
  63 # without having to set LD_LIBRARY_PATH:
  64 SET(_PREREQ_@PROJECT_NAME@ @_PREREQ_LIST@)
  65 SET(_PREREQ_@PROJECT_NAME@_CONFIG_DIR @_PREREQ_DIR_LIST@)
  66 SET(_PREREQ_@PROJECT_NAME@_COMPONENTS "@_PREREQ_COMPO_LIST@")
  67 LIST(LENGTH _PREREQ_@PROJECT_NAME@_CONFIG_DIR _list_len_@PROJECT_NAME@)
  68 IF(NOT _list_len_@PROJECT_NAME@ EQUAL 0)
  69   # Another CMake stupidity - FOREACH(... RANGE r) generates r+1 numbers ...
  70   MATH(EXPR _range_@PROJECT_NAME@ "${_list_len_@PROJECT_NAME@}-1")
  71   FOREACH(_p_@PROJECT_NAME@ RANGE ${_range_@PROJECT_NAME@})
  72     LIST(GET _PREREQ_@PROJECT_NAME@            ${_p_@PROJECT_NAME@} _pkg_@PROJECT_NAME@    )
  73     LIST(GET _PREREQ_@PROJECT_NAME@_CONFIG_DIR ${_p_@PROJECT_NAME@} _pkg_dir_@PROJECT_NAME@)
  74     LIST(GET _PREREQ_@PROJECT_NAME@_COMPONENTS ${_p_@PROJECT_NAME@} _pkg_compo_@PROJECT_NAME@)
  75     IF(NOT OMIT_DETECT_PACKAGE_${_pkg_@PROJECT_NAME@})
  76       MESSAGE(STATUS "===> Reloading targets from ${_pkg_@PROJECT_NAME@} ...")
  77       IF(NOT _pkg_compo_@PROJECT_NAME@)
  78         FIND_PACKAGE(${_pkg_@PROJECT_NAME@} REQUIRED NO_MODULE
  79             PATHS "${_pkg_dir_@PROJECT_NAME@}"
  80             NO_DEFAULT_PATH)
  81       ELSE()
  82         STRING(REPLACE "," ";" _compo_lst_@PROJECT_NAME@ "${_pkg_compo_@PROJECT_NAME@}")
  83         MESSAGE(STATUS "===> (components: ${_pkg_compo_@PROJECT_NAME@})")
  84         FIND_PACKAGE(${_pkg_@PROJECT_NAME@} REQUIRED NO_MODULE
  85             COMPONENTS ${_compo_lst_@PROJECT_NAME@}
  86             PATHS "${_pkg_dir_@PROJECT_NAME@}"
  87             NO_DEFAULT_PATH)
  88       ENDIF()
  89     ENDIF()
  90   ENDFOREACH()
  91 ENDIF()
  92
  93 # Installation directories
  94 SET(SALOME_INSTALL_BINS "@SALOME_INSTALL_BINS@")
  95 SET(SALOME_INSTALL_LIBS "@SALOME_INSTALL_LIBS@")
  96 SET(SALOME_INSTALL_IDLS "@SALOME_INSTALL_IDLS@")
  97 SET(SALOME_INSTALL_HEADERS "@SALOME_INSTALL_HEADERS@")
  98 SET(SALOME_INSTALL_CMAKE_LOCAL "@SALOME_INSTALL_CMAKE_LOCAL@")
  99 SET(SALOME_INSTALL_RES "@SALOME_INSTALL_RES@")
 100 SET(SALOME_INSTALL_DOC "@SALOME_INSTALL_DOC@")
 101 SET(SALOME_INSTALL_PYTHON "@SALOME_INSTALL_PYTHON@")
 102
 103 # Include GEOM targets if they were not already loaded:
 104 IF(NOT (TARGET GEOMEngine))
 105   INCLUDE("${GEOM_ROOT_DIR_EXP}/${SALOME_INSTALL_CMAKE}/SalomeGEOMTargets.cmake")
 106 ENDIF()
 107
 108 # Exposed DXFPLUGIN targets:
 109 SET(DXFPLUGIN_SalomeIDLDXFPlugin SalomeIDLDXFPlugin)
 110 SET(DXFPLUGIN_DXFPluginEngine DXFPluginEngine)
 111 SET(DXFPLUGIN_DXFPluginGUI DXFPluginGUI)