Move into standalone group scripts that depend on plugins. This group is not used...

diff --git a/doc/salome/examples/Makefile.am b/doc/salome/examples/Makefile.am
index 930edd9fc894ff6c0ccaced9a3020337e29b6ff8..fe7f58414ab512885b88f5349dbe7fa67b91e1dc 100644 (file)
--- a/doc/salome/examples/Makefile.am
+++ b/doc/salome/examples/Makefile.am
@@ -26,16 +26,34 @@ include $(top_srcdir)/adm_local/unix/make_common_starter.am
 
 pyexamplesdir = $(docdir)/examples/SMESH
 
-BAD_TESTS = 
+BAD_TESTS = \
+       3dmesh.py \
+       creating_meshes_ex01.py \
+       creating_meshes_ex03.py \
+       creating_meshes_ex05.py \
+       defining_hypotheses_ex06.py \
+       defining_hypotheses_ex09.py \
+       defining_hypotheses_ex17.py \
+       filters_ex02.py \
+       filters_ex08.py \
+       filters_ex23.py \
+       filters_ex24.py \
+       filters_ex25.py \
+       filters_ex32.py \
+       filters_ex35.py \
+       generate_flat_elements.py \
+       modifying_meshes_ex26.py \
+       notebook_smesh.py \
+       quality_controls_ex06.py \
+       quality_controls_ex20.py \
+       quality_controls_ex21.py \
+       quality_controls_ex22.py \
+       viewing_meshes_ex01.py 
 
 GOOD_TESTS = \
-       3dmesh.py \
        cartesian_algo.py \
-       creating_meshes_ex01.py \
        creating_meshes_ex02.py \
-       creating_meshes_ex03.py \
        creating_meshes_ex04.py \
-       creating_meshes_ex05.py \
        creating_meshes_ex06.py \
        creating_meshes_ex07.py \
        creating_meshes_ex08.py \
@@ -44,10 +62,8 @@ GOOD_TESTS = \
        defining_hypotheses_ex03.py \
        defining_hypotheses_ex04.py \
        defining_hypotheses_ex05.py \
-       defining_hypotheses_ex06.py \
        defining_hypotheses_ex07.py \
        defining_hypotheses_ex08.py \
-       defining_hypotheses_ex09.py \
        defining_hypotheses_ex10.py \
        defining_hypotheses_ex11.py \
        defining_hypotheses_ex12.py \
@@ -55,15 +71,12 @@ GOOD_TESTS = \
        defining_hypotheses_ex14.py \
        defining_hypotheses_ex15.py \
        defining_hypotheses_ex16.py \
-       defining_hypotheses_ex17.py \
        filters_ex01.py \
-       filters_ex02.py \
        filters_ex03.py \
        filters_ex04.py \
        filters_ex05.py \
        filters_ex06.py \
        filters_ex07.py \
-       filters_ex08.py \
        filters_ex09.py \
        filters_ex10.py \
        filters_ex11.py \
@@ -78,21 +91,15 @@ GOOD_TESTS = \
        filters_ex20.py \
        filters_ex21.py \
        filters_ex22.py \
-       filters_ex23.py \
-       filters_ex24.py \
-       filters_ex25.py \
        filters_ex26.py \
        filters_ex27.py \
        filters_ex28.py \
        filters_ex29.py \
        filters_ex30.py \
        filters_ex31.py \
-       filters_ex32.py \
        filters_ex33.py \
        filters_ex34.py \
-       filters_ex35.py \
        filters_ex36.py \
-       generate_flat_elements.py \
        grouping_elements_ex01.py \
        grouping_elements_ex02.py \
        grouping_elements_ex03.py \
@@ -128,15 +135,12 @@ GOOD_TESTS = \
        modifying_meshes_ex23.py \
        modifying_meshes_ex24.py \
        modifying_meshes_ex25.py \
-       modifying_meshes_ex26.py \
-       notebook_smesh.py \
        prism_3d_algo.py \
        quality_controls_ex01.py \
        quality_controls_ex02.py \
        quality_controls_ex03.py \
        quality_controls_ex04.py \
        quality_controls_ex05.py \
-       quality_controls_ex06.py \
        quality_controls_ex07.py \
        quality_controls_ex08.py \
        quality_controls_ex09.py \
@@ -150,9 +154,6 @@ GOOD_TESTS = \
        quality_controls_ex17.py \
        quality_controls_ex18.py \
        quality_controls_ex19.py \
-       quality_controls_ex20.py \
-       quality_controls_ex21.py \
-       quality_controls_ex22.py \
        transforming_meshes_ex01.py \
        transforming_meshes_ex02.py \
        transforming_meshes_ex03.py \
@@ -167,7 +168,6 @@ GOOD_TESTS = \
        transforming_meshes_ex12.py \
        transforming_meshes_ex13.py \
        use_existing_faces.py \
-       viewing_meshes_ex01.py \
        viewing_meshes_ex02.py
 
 pyexamples_SCRIPTS = $(BAD_TESTS) $(GOOD_TESTS)

diff --git a/doc/salome/examples/filters_ex13.py b/doc/salome/examples/filters_ex13.py
index d5415e20a4fefef4f8de1e084e759f2fc2e90918..e20937d1b43526bfc3abab05f723a9b4a4529e38 100644 (file)
--- a/doc/salome/examples/filters_ex13.py
+++ b/doc/salome/examples/filters_ex13.py
@@ -3,7 +3,7 @@
 # create mesh
 from SMESH_mechanic import *
 # remove some faces to have faces with bare borders
-mesh.RemoveElements( mesh.GetElementsByType(FACE)[0:5] )
+mesh.RemoveElements( mesh.GetElementsByType(smesh.FACE)[0:5] )
 # get all faces bare borders
 filter = smesh.GetFilter(smesh.FACE, smesh.FT_BareBorderFace)
 ids = mesh.GetIdsFromFilter(filter)

diff --git a/doc/salome/examples/filters_ex14.py b/doc/salome/examples/filters_ex14.py
index 45c356cdfb140e2ebd87661e3ec1533635e462db..01ea27ab92bf14b16f4f76f29bcd1ccb14806fd4 100644 (file)
--- a/doc/salome/examples/filters_ex14.py
+++ b/doc/salome/examples/filters_ex14.py
@@ -2,7 +2,7 @@
 
 # create mesh
 from SMESH_mechanic import *
-faceID = mesh.GetElementsByType(FACE)[0]
+faceID = mesh.GetElementsByType(smesh.FACE)[0]
 # get all faces co-planar to the first face with tolerance 5 degrees
 filter = smesh.GetFilter(smesh.FACE, smesh.FT_CoplanarFaces,faceID,Tolerance=5.0)
 ids = mesh.GetIdsFromFilter(filter)

diff --git a/doc/salome/examples/filters_ex31.py b/doc/salome/examples/filters_ex31.py
index a20f7d70833aef5e7b820ba1d8faa009861f4e62..4a2acbfa85954f268692f34b0b2e4ef2d4e907de 100644 (file)
--- a/doc/salome/examples/filters_ex31.py
+++ b/doc/salome/examples/filters_ex31.py
@@ -3,9 +3,9 @@
 # create mesh
 from SMESH_mechanic import *
 # get nodes with identifiers [5-10] and [15-30]
-criterion1 = smesh.GetCriterion(smesh.NODE, smesh.FT_RangeOfIds, Treshold="5-10",\
+criterion1 = smesh.GetCriterion(smesh.NODE, smesh.FT_RangeOfIds, Threshold="5-10",\
                                 BinaryOp=smesh.FT_LogicalOR)
-criterion2 = smesh.GetCriterion(smesh.NODE, smesh.FT_RangeOfIds, Treshold="15-30")
+criterion2 = smesh.GetCriterion(smesh.NODE, smesh.FT_RangeOfIds, Threshold="15-30")
 filter = smesh.CreateFilterManager().CreateFilter()
 filter.SetCriteria([criterion1,criterion2])
 ids = mesh.GetIdsFromFilter(filter)

diff --git a/doc/salome/examples/modifying_meshes_ex10.py b/doc/salome/examples/modifying_meshes_ex10.py
index 7f36728c15caf27a2a8ccc98a0161a837cf6afad..1d1af1942247330ed82e636ece22a813a155df43 100644 (file)
--- a/doc/salome/examples/modifying_meshes_ex10.py
+++ b/doc/salome/examples/modifying_meshes_ex10.py
@@ -1,6 +1,7 @@
 # Add Polyhedron
 
 import salome
+import smesh
 import math
 
 # create an empty mesh structure
@@ -39,18 +40,18 @@ for i in range(5):
     pass
 
 # Create a polyhedral volume (12-hedron with pentagonal faces)
-MeshEditor.AddPolyhedralVolume([dd[0], dd[1], dd[2], dd[3], dd[4],  # top
-                                dd[0], cc[0], bb[1], cc[1], dd[1],  # -
-                                dd[1], cc[1], bb[2], cc[2], dd[2],  # -
-                                dd[2], cc[2], bb[3], cc[3], dd[3],  # - below top
-                                dd[3], cc[3], bb[4], cc[4], dd[4],  # -
-                                dd[4], cc[4], bb[0], cc[0], dd[0],  # -
-                                aa[4], bb[4], cc[4], bb[0], aa[0],  # .
-                                aa[3], bb[3], cc[3], bb[4], aa[4],  # .
-                                aa[2], bb[2], cc[2], bb[3], aa[3],  # . above bottom
-                                aa[1], bb[1], cc[1], bb[2], aa[2],  # .
-                                aa[0], bb[0], cc[0], bb[1], aa[1],  # .
-                                aa[0], aa[1], aa[2], aa[3], aa[4]], # bottom
-                               [5,5,5,5,5,5,5,5,5,5,5,5])
+mesh.GetMeshEditor().AddPolyhedralVolume([dd[0], dd[1], dd[2], dd[3], dd[4],  # top
+                                          dd[0], cc[0], bb[1], cc[1], dd[1],  # -
+                                          dd[1], cc[1], bb[2], cc[2], dd[2],  # -
+                                          dd[2], cc[2], bb[3], cc[3], dd[3],  # - below top
+                                          dd[3], cc[3], bb[4], cc[4], dd[4],  # -
+                                          dd[4], cc[4], bb[0], cc[0], dd[0],  # -
+                                          aa[4], bb[4], cc[4], bb[0], aa[0],  # .
+                                          aa[3], bb[3], cc[3], bb[4], aa[4],  # .
+                                          aa[2], bb[2], cc[2], bb[3], aa[3],  # . above bottom
+                                          aa[1], bb[1], cc[1], bb[2], aa[2],  # .
+                                          aa[0], bb[0], cc[0], bb[1], aa[1],  # .
+                                          aa[0], aa[1], aa[2], aa[3], aa[4]], # bottom
+                                         [5,5,5,5,5,5,5,5,5,5,5,5])
 
 salome.sg.updateObjBrowser(1)

diff --git a/doc/salome/examples/quality_controls_ex01.py b/doc/salome/examples/quality_controls_ex01.py
index ed4dc244ed7fe5dbd3d3633a56c7a21e7977afd3..f411d2e61562a1a926c441b6e3ddd2ac9a74d04f 100644 (file)
--- a/doc/salome/examples/quality_controls_ex01.py
+++ b/doc/salome/examples/quality_controls_ex01.py
@@ -35,7 +35,7 @@ for i in range(len(anIds)):
 print ""
 
 # create a group
-aGroup = mesh.CreateGroup(SMESH.EDGE, "Free borders")
+aGroup = mesh.GetMesh().CreateGroup(smesh.EDGE, "Free borders")
 aGroup.Add(anIds)
 
 salome.sg.updateObjBrowser(1)

diff --git a/doc/salome/examples/quality_controls_ex02.py b/doc/salome/examples/quality_controls_ex02.py
index 7b1f55e6fc5aca88cb4507986992a68093df42af..5373c4d6fdd9dec843588cbd347137a816dc82b7 100644 (file)
--- a/doc/salome/examples/quality_controls_ex02.py
+++ b/doc/salome/examples/quality_controls_ex02.py
@@ -38,7 +38,7 @@ for i in range(len(anIds)):
 print ""
 
 # create a group
-aGroup = mesh.CreateGroup(SMESH.EDGE, "Borders at multi-connections")
+aGroup = mesh.GetMesh().CreateGroup(smesh.EDGE, "Borders at multi-connections")
 aGroup.Add(anIds)
 
 salome.sg.updateObjBrowser(1)

diff --git a/doc/salome/examples/quality_controls_ex03.py b/doc/salome/examples/quality_controls_ex03.py
index 8cb409866181c3672f49c8c25832264234b631be..eaa607b94aa671a29703c07d6dd888ca45f78958 100644 (file)
--- a/doc/salome/examples/quality_controls_ex03.py
+++ b/doc/salome/examples/quality_controls_ex03.py
@@ -37,7 +37,7 @@ for i in range(len(anIds)):
 print ""
 
 # create a group
-aGroup = mesh.CreateGroup(SMESH.EDGE, "Edges with length > " + `length_margin`)
+aGroup = mesh.GetMesh().CreateGroup(smesh.EDGE, "Edges with length > " + `length_margin`)
 aGroup.Add(anIds)
 
 salome.sg.updateObjBrowser(1)

diff --git a/doc/salome/examples/transforming_meshes_ex04.py b/doc/salome/examples/transforming_meshes_ex04.py
index ea7c72f540bddb42c944921f673cbb7b7ec9fac6..0bfea6188467d331ea2629dc53fae82fc21ad7fb 100644 (file)
--- a/doc/salome/examples/transforming_meshes_ex04.py
+++ b/doc/salome/examples/transforming_meshes_ex04.py
@@ -8,6 +8,6 @@ smesh = SMESH_mechanic.smesh
 mesh = SMESH_mechanic.mesh 
 
 # create a symmetrical copy of the mesh mirrored through a point
-axis = SMESH.AxisStruct(0, 0, 0, 0, 0, 0)
+axis = smesh.AxisStruct(0, 0, 0, 0, 0, 0)
 
 mesh.Mirror([], axis, smesh.POINT, 1)

diff --git a/doc/salome/examples/viewing_meshes_ex02.py b/doc/salome/examples/viewing_meshes_ex02.py
index de345e8a39523cb4d062aa034aceebd1139ba3ad..cd096ca760df759c8a38d2936e9d3e8e34dab4ce 100644 (file)
--- a/doc/salome/examples/viewing_meshes_ex02.py
+++ b/doc/salome/examples/viewing_meshes_ex02.py
@@ -8,7 +8,7 @@ import SMESH
 box = geompy.MakeBoxDXDYDZ(100,100,100)
 
 # Create a mesh
-mesh = Mesh(box,"Mesh")
+mesh = smesh.Mesh(box,"Mesh")
 mesh.AutomaticHexahedralization()
 mesh.Compute()