More doc update

diff --git a/doc/salome/gui/SMESH/input/1d_meshing_hypo.doc b/doc/salome/gui/SMESH/input/1d_meshing_hypo.doc
index 373011708e5e48bf03189abd915d0f20de384761..4a174a8659d1a84695beae90c97ed6c5bd61366a 100644 (file)
--- a/doc/salome/gui/SMESH/input/1d_meshing_hypo.doc
+++ b/doc/salome/gui/SMESH/input/1d_meshing_hypo.doc
@@ -45,11 +45,15 @@ creation of narrow 2D elements.
 length that changes in arithmetic progression (Lk = Lk-1 + d)
 beginning from a given starting length and up to a given end length.
 
 length that changes in arithmetic progression (Lk = Lk-1 + d)
 beginning from a given starting length and up to a given end length.
 

-The direction of the splitting is defined by the orientation of the underlying geometrical edge. 
-<b>"Reverse Edges"</b> list box allows to specify the edges for which the splitting should be made 
-in the direction opposing to their orientation. This list box is enabled only if the geometry object 
-is selected for the meshing. In this case the user can select edges to be reversed either by directly 
-picking them in the 3D viewer or by selecting the edges or groups of edges in the Object Browser.
+The splitting direction is defined by the orientation of the
+underlying geometrical edge.
+<b>Reverse Edges</b> list box allows specifying the edges, for which
+the splitting should be made in the direction opposite to their
+orientation. This list box is usable only if a geometry object is
+selected for meshing. In this case it is possible to select edges to
+be reversed either directly picking them in the 3D viewer or by
+selecting the edges or groups of edges in the Object Browser. Use \b
+Add button to add the selected edges to the list.

 
 \image html a-arithmetic1d.png
 
 
 \image html a-arithmetic1d.png
 


@@ -73,7 +77,8 @@ the splitting should be made in the direction opposite to their
 orientation. This list box is usable only if a geometry object is
 selected for meshing. In this case it is possible to select edges to
 be reversed either directly picking them in the 3D viewer or by
 orientation. This list box is usable only if a geometry object is
 selected for meshing. In this case it is possible to select edges to
 be reversed either directly picking them in the 3D viewer or by

-selecting the edges or groups of edges in the Object Browser. 
+selecting the edges or groups of edges in the Object Browser. Use \b
+Add button to add the selected edges to the list.

 
 \image html a-geometric1d.png
 
 
 \image html a-geometric1d.png
 


@@ -158,11 +163,14 @@ edges generated by these segments will represent nodes of your
 mesh. Later these nodes will be used for meshing of the faces abutting
 to these edges.
 
 mesh. Later these nodes will be used for meshing of the faces abutting
 to these edges.
 

-The direction of the splitting is defined by the orientation of the underlying geometrical edge. 
-<b>"Reverse Edges"</b> list box allows to specify the edges for which the splitting should be made 
-in the direction opposing to their orientation. This list box is enabled only if the geometry object 
-is selected for the meshing. In this case the user can select edges to be reversed either directly 
-picking them in the 3D viewer or by selecting the edges or groups of edges in the Object Browser.
+The direction of the splitting is defined by the orientation of the
+underlying geometrical edge. <b>"Reverse Edges"</b> list box allows to
+specify the edges for which the splitting should be made in the
+direction opposing to their orientation. This list box is enabled only
+if the geometry object is selected for the meshing. In this case the
+user can select edges to be reversed either by directly picking them
+in the 3D viewer or by selecting the edges or groups of edges in the
+Object Browser.

 
 \image html image46.gif
 
 
 \image html image46.gif
 


@@ -207,11 +215,14 @@ geometric progression. Then mesh nodes are
 constructed at segment ends location and 1D mesh elements are
 constructed on them.
 
 constructed at segment ends location and 1D mesh elements are
 constructed on them.
 

-The direction of the splitting is defined by the orientation of the underlying geometrical edge. 
-<b>"Reverse Edges"</b> list box allows to specify the edges for which the splitting should be made 
-in the direction opposing to their orientation. This list box is enabled only if the geometry object 
-is selected for the meshing. In this case the user can select edges to be reversed either directly 
-picking them in the 3D viewer or by selecting the edges or groups of edges in the Object Browser.
+The direction of the splitting is defined by the orientation of the
+underlying geometrical edge. <b>"Reverse Edges"</b> list box allows to
+specify the edges for which the splitting should be made in the
+direction opposing to their orientation. This list box is enabled only
+if the geometry object is selected for the meshing. In this case the
+user can select edges to be reversed either by directly picking them
+in the 3D viewer or by selecting the edges or groups of edges in the
+Object Browser.

 
 \image html a-startendlength.png
 
 
 \image html a-startendlength.png
 

diff --git a/doc/salome/gui/SMESH/input/constructing_meshes.doc b/doc/salome/gui/SMESH/input/constructing_meshes.doc
index 34ca6e99595892f7ee5e2f7611c98662bde6b33c..b4aa75ecb02e1b8f60a07d4e1e92d894763d4a45 100644 (file)
--- a/doc/salome/gui/SMESH/input/constructing_meshes.doc
+++ b/doc/salome/gui/SMESH/input/constructing_meshes.doc
@@ -148,7 +148,13 @@
 
       \image html hypo_sets.png
       List of sets of hypotheses. Tag <em>[custom]</em> is
 
       \image html hypo_sets.png
       List of sets of hypotheses. Tag <em>[custom]</em> is

-      automatically added to the sets defined by the user
+      automatically added to the sets defined by the user.
+      
+      \note \a Automatic in the names of pre-defined sets of
+      hypotheses means only that initially \ref
+      automatic_length_anchor "Automatic Length" hypothesis was
+      included in these sets, and not that these sets are suitable for
+      meshing any geometry.

   </li>
 </ol>
 
   </li>
 </ol>