# -*- coding: utf-8 -*-
-# Copyright (C) 2014-2020 EDF R&D
+# Copyright (C) 2014-2021 EDF R&D
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
#
# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
#
+"""Géométrie et maillage de base nécessaire au cas-test :
+. faceGauche_2
+"""
-import sys
-import salome
+import os
+import math
-salome.salome_init()
+import logging
-import salome_notebook
-notebook = salome_notebook.notebook
+import salome
+from salome.smesh import smeshBuilder
+from salome.StdMeshers import StdMeshersBuilder
+import GEOM
+import SMESH
+import SALOMEDS
-import os
from blocFissure import gmu
+from blocFissure.gmu.geomsmesh import geompy
+from blocFissure.gmu.geomsmesh import geomPublish
+from blocFissure.gmu.geomsmesh import geomPublishInFather
+
+from blocFissure.gmu.triedreBase import triedreBase
+from blocFissure.gmu.putName import putName
+from blocFissure.gmu import initLog
###
### GEOM component
###
-import GEOM
-from salome.geom import geomBuilder
-import math
-import SALOMEDS
-
+O, OX, OY, OZ = triedreBase()
-geompy = geomBuilder.New()
-
-O = geompy.MakeVertex(0, 0, 0)
-OX = geompy.MakeVectorDXDYDZ(1, 0, 0)
-OY = geompy.MakeVectorDXDYDZ(0, 1, 0)
-OZ = geompy.MakeVectorDXDYDZ(0, 0, 1)
-Circle_1 = geompy.MakeCircle(O, OX, 500)
+Circle_1 = geompy.MakeCircle(O, OX, 500.)
Extrusion_1 = geompy.MakePrismVecH2Ways(Circle_1, OX, 500)
-Vertex_1 = geompy.MakeVertex(500, 0, 0)
+Vertex_1 = geompy.MakeVertex(500., 0., 0.)
Circle_3 = geompy.MakeCircle(Vertex_1, OZ, 300)
Extrusion_2 = geompy.MakePrismVecH(Circle_3, OZ, 1000)
Partition_1 = geompy.MakePartition([Extrusion_1], [Extrusion_2], [], [], geompy.ShapeType["FACE"], 0, [], 0)
[Face_1,Face_2] = geompy.SubShapes(Partition_1, [18, 13])
+
FaceFissExt = geompy.MakeFuse(Face_2, Face_1)
+geompy.addToStudy( FaceFissExt, 'FaceFissExt' )
geompy.ExportBREP(FaceFissExt, os.path.join(gmu.pathBloc, "materielCasTests", "faceGauche2Fiss.brep"))
+
Vertex_2 = geompy.MakeVertex(0, -500, 0)
Vertex_3 = geompy.MakeVertex(400, 500, 800)
objetSain = geompy.MakeBoxTwoPnt(Vertex_3, Vertex_2)
-Rotation_1 = geompy.MakeRotation(Extrusion_1, OX, 180*math.pi/180.0)
+geompy.addToStudy( objetSain, 'objetSain' )
+
+Rotation_1 = geompy.MakeRotation(Extrusion_1, OX, math.pi)
Partition_2 = geompy.MakePartition([Rotation_1], [Extrusion_2], [], [], geompy.ShapeType["FACE"], 0, [], 0)
geompy.addToStudy( Partition_2, 'Partition_2' )
[FaceFissExtSimple] = geompy.SubShapes(Partition_2, [13])
geompy.addToStudyInFather( Partition_2, FaceFissExtSimple, 'FaceFissExtSimple' )
-Plane_1 = geompy.MakePlaneLCS(None, 2000, 3)
+Plane_1 = geompy.MakePlaneLCS(None, 2000., 3)
+
FaceFissExtCoupe = geompy.MakePartition([FaceFissExtSimple], [Plane_1], [], [], geompy.ShapeType["FACE"], 0, [], 0)
-geompy.ExportBREP(FaceFissExtCoupe, os.path.join(gmu.pathBloc, "materielCasTests", "faceGauche2FissCoupe.brep"))
-geompy.addToStudy( O, 'O' )
-geompy.addToStudy( OX, 'OX' )
-geompy.addToStudy( OY, 'OY' )
-geompy.addToStudy( OZ, 'OZ' )
-geompy.addToStudy( Circle_1, 'Circle_1' )
-geompy.addToStudy( Extrusion_1, 'Extrusion_1' )
-geompy.addToStudy( Vertex_1, 'Vertex_1' )
-geompy.addToStudy( Circle_3, 'Circle_3' )
-geompy.addToStudy( Extrusion_2, 'Extrusion_2' )
-geompy.addToStudy( Partition_1, 'Partition_1' )
-geompy.addToStudyInFather( Partition_1, Face_1, 'Face_1' )
-geompy.addToStudyInFather( Partition_1, Face_2, 'Face_2' )
-geompy.addToStudy( FaceFissExt, 'FaceFissExt' )
-geompy.addToStudy( Vertex_2, 'Vertex_2' )
-geompy.addToStudy( Vertex_3, 'Vertex_3' )
-geompy.addToStudy( objetSain, 'objetSain' )
-geompy.addToStudy( Rotation_1, 'Rotation_1' )
-geompy.addToStudy( Plane_1, 'Plane_1' )
geompy.addToStudy( FaceFissExtCoupe, 'FaceFissExtCoupe' )
+geompy.ExportBREP(FaceFissExtCoupe, os.path.join(gmu.pathBloc, "materielCasTests", "faceGauche2FissCoupe.brep"))
+
+geomPublish(initLog.debug, Circle_1, 'Circle_1' )
+geomPublish(initLog.debug, Extrusion_1, 'Extrusion_1' )
+geomPublish(initLog.debug, Vertex_1, 'Vertex_1' )
+geomPublish(initLog.debug, Circle_3, 'Circle_3' )
+geomPublish(initLog.debug, Extrusion_2, 'Extrusion_2' )
+geomPublish(initLog.debug, Partition_1, 'Partition_1' )
+geomPublishInFather(initLog.debug, Partition_1, Face_1, 'Face_1' )
+geomPublishInFather(initLog.debug, Partition_1, Face_2, 'Face_2' )
+geomPublish(initLog.debug, Vertex_2, 'Vertex_2' )
+geomPublish(initLog.debug, Vertex_3, 'Vertex_3' )
+geomPublish(initLog.debug, Rotation_1, 'Rotation_1' )
+geomPublish(initLog.debug, Plane_1, 'Plane_1' )
+
###
### SMESH component
###
-
-import SMESH, SALOMEDS
-from salome.smesh import smeshBuilder
-
smesh = smeshBuilder.New()
-from salome.StdMeshers import StdMeshersBuilder
Mesh_1 = smesh.Mesh(objetSain)
+putName(Mesh_1.GetMesh(), 'Mesh_1')
+
Regular_1D = Mesh_1.Segment()
Nb_Segments_1 = Regular_1D.NumberOfSegments(15,[],[ ])
Nb_Segments_1.SetDistrType( 0 )
Quadrangle_2D = Mesh_1.Quadrangle(algo=smeshBuilder.QUADRANGLE)
Hexa_3D = Mesh_1.Hexahedron(algo=smeshBuilder.Hexa)
-isDone = Mesh_1.Compute()
-smesh.SetName(Mesh_1, 'Mesh_1')
-Mesh_1.ExportMED(os.path.join(gmu.pathBloc, "materielCasTests", "boiteSaine.med"))
## set object names
-smesh.SetName(Mesh_1.GetMesh(), 'Mesh_1')
-smesh.SetName(Regular_1D.GetAlgorithm(), 'Regular_1D')
-smesh.SetName(Nb_Segments_1, 'Nb. Segments_1')
-smesh.SetName(Quadrangle_2D.GetAlgorithm(), 'Quadrangle_2D')
-smesh.SetName(Hexa_3D.GetAlgorithm(), 'Hexa_3D')
+#smesh.SetName(Regular_1D.GetAlgorithm(), 'Regular_1D')
+#smesh.SetName(Quadrangle_2D.GetAlgorithm(), 'Quadrangle_2D')
+#smesh.SetName(Hexa_3D.GetAlgorithm(), 'Hexa_3D')
+putName(Nb_Segments_1, 'Nb. Segments_1', i_pref='fissuregauche2')
+
+is_done = Mesh_1.Compute()
+text = "Mesh_1.Compute"
+if is_done:
+ logging.info(text+" OK")
+else:
+ text = "Erreur au calcul du maillage.\n" + text
+ logging.info(text)
+ raise Exception(text)
+
+Mesh_1.ExportMED(os.path.join(gmu.pathBloc, "materielCasTests", "boiteSaine.med"))
if salome.sg.hasDesktop():
salome.sg.updateObjBrowser()
