# -*- coding: utf-8 -*-
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+# Copyright (C) 2014-2020 EDF R&D
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# -----------------------------------------------------------------------------
# --- maillage du bloc partitionne
-def meshBlocPart(blocPartition, faceFissure, tore, centres, edges, diams, circles, faces,
- gencnt, facefissoutore, edgeext, facesExternes, facesExtBloc, facesExtElli,
- aretesInternes, internalBoundary, ellipsoidep, sharedFaces, sharedEdges, edgesBords,
+def meshBlocPart(blocPartition, faceFissure, tore, centres, edges, diams, circles, faces, \
+ gencnt, facefissoutore, edgeext, facesExternes, facesExtBloc, facesExtElli, \
+ aretesInternes, internalBoundary, ellipsoidep, sharedFaces, sharedEdges, edgesBords, \
nbsegExt, nbsegGen, nbsegRad, scaleRad, reverses, reverext, nbsegCercle, nbsegFis, dmoyen, lensegEllipsoide):
- """
- Maillage du bloc partitionné
+ """Maillage du bloc partitionné
+
TODO: a completer
"""
logging.info('start')
aFilterManager = smesh.CreateFilterManager()
nbAdded, internalBoundary, _NoneGroup = internalBoundary.MakeBoundaryElements( SMESH.BND_1DFROM2D, '', '', 0, [ ])
- criteres = []
+ criteres = list()
unCritere = smesh.GetCriterion(SMESH.EDGE,SMESH.FT_FreeBorders,SMESH.FT_Undefined,0)
criteres.append(unCritere)
filtre = smesh.GetFilterFromCriteria(criteres)
bloc1 = smesh.Mesh(blocPartition)
- for i in range(len(sharedFaces)):
- algo2d = bloc1.Triangle(algo=smeshBuilder.NETGEN, geom=sharedFaces[i])
+ for i, sharedFaces_i in enumerate(sharedFaces):
+ algo2d = bloc1.Triangle(algo=smeshBuilder.NETGEN, geom=sharedFaces_i)
hypo2d = algo2d.Parameters(which=smesh.SIMPLE)
hypo2d.SetLocalLength(lensegEllipsoide)
hypo2d.LengthFromEdges()
putName(algo2d, "algo2d_sharedFaces", i)
putName(hypo2d, "hypo2d_sharedFaces", i)
- for i in range(len(sharedEdges)):
- algo1d = bloc1.Segment(geom=sharedEdges[i])
+ for i, sharedEdges_i in enumerate(sharedEdges):
+ algo1d = bloc1.Segment(geom=sharedEdges_i)
hypo1d = algo1d.LocalLength(lensegEllipsoide)
putName(algo1d.GetSubMesh(), "sharedEdges", i)
putName(algo1d, "algo1d_sharedEdges", i)
putName(algo1d, "algo1d_tore")
putName(hypo1d, "hypo1d_tore")
- for i in range(len(faces)):
- algo2d = bloc1.Quadrangle(geom=faces[i])
+ for i, faces_i in enumerate(faces):
+ algo2d = bloc1.Quadrangle(geom=faces_i)
hypo2d = smesh.CreateHypothesis('QuadrangleParams')
hypo2d.SetTriaVertex( geompy.GetSubShapeID(blocPartition,centres[i]) )
hypo2d.SetQuadType( StdMeshersBuilder.QUAD_STANDARD )
- status = bloc1.AddHypothesis(hypo2d,faces[i])
+ status = bloc1.AddHypothesis(hypo2d,faces_i)
putName(algo2d.GetSubMesh(), "faces", i)
putName(algo2d, "algo2d_faces", i)
putName(hypo2d, "hypo2d_faces", i)
- for i in range(len(edges)):
- algo1d = bloc1.Segment(geom=edges[i])
+ for i, edges_i in enumerate(edges):
+ algo1d = bloc1.Segment(geom=edges_i)
if reverses[i] > 0:
- hypo1d = algo1d.NumberOfSegments(nbsegRad, scaleRad,[ geompy.GetSubShapeID(blocPartition,edges[i]) ])
+ hypo1d = algo1d.NumberOfSegments(nbsegRad, scaleRad,[ geompy.GetSubShapeID(blocPartition,edges_i) ])
else:
hypo1d = algo1d.NumberOfSegments(nbsegRad, scaleRad,[ ])
putName(algo1d.GetSubMesh(), "edges", i)
putName(algo1d, "algo1d_edges", i)
putName(hypo1d, "hypo1d_edges", i)
- for i in range(len(circles)):
- algo1d = bloc1.Segment(geom=circles[i])
+ for i, circles_i in enumerate(circles):
+ algo1d = bloc1.Segment(geom=circles_i)
hypo1d = algo1d.NumberOfSegments(nbsegCercle)
putName(algo1d.GetSubMesh(), "circles", i)
putName(algo1d, "algo1d_circles", i)
putName(hypo1d, "hypo1d_edgeext")
else:
longTotal = 0
- longEdgeExts = []
- for i in range(len(edgeext)):
- props = geompy.BasicProperties(edgeext[i])
+ longEdgeExts = list()
+ for i, edgeext_i in enumerate(edgeext):
+ props = geompy.BasicProperties(edgeext_i)
longEdgeExts.append(props[0])
longTotal += props[0]
- for i in range(len(edgeext)):
+ for i, edgeext_i in enumerate(edgeext):
local = longTotal/nbsegFis
nbLocal = int(round(nbsegFis*longEdgeExts[i]/longTotal))
densite = int(round(nbLocal/2))
- algo1d = bloc1.Segment(geom=edgeext[i])
+ algo1d = bloc1.Segment(geom=edgeext_i)
hypo1d = algo1d.NumberOfSegments(nbLocal)
hypo1d.SetDistrType( 2 )
hypo1d.SetConversionMode( 1 )
hypo1d.SetTableFunction( [ 0, densite, 0.8, 1, 1, 1 ] )
if reverext[i]:
- hypo1d.SetReversedEdges([ geompy.GetSubShapeID(blocPartition, edgeext[i]) ])
+ hypo1d.SetReversedEdges([ geompy.GetSubShapeID(blocPartition, edgeext_i) ])
putName(algo1d.GetSubMesh(), "edgeext", i)
putName(algo1d, "algo1d_edgeext", i)
putName(hypo1d, "hypo1d_edgeext", i)
maxElemArea = 0.5*dmoyen*dmoyen
logging.debug("dmoyen %s, maxElemArea %s", dmoyen, maxElemArea)
- for i in range(len(facesExternes)):
- algo2d = bloc1.Triangle(algo=smeshBuilder.NETGEN_2D, geom=facesExternes[i])
+ for i, facesExternes_i in enumerate(facesExternes):
+ algo2d = bloc1.Triangle(algo=smeshBuilder.NETGEN_2D, geom=facesExternes_i)
hypo2d = algo2d.MaxElementArea(maxElemArea)
if edgesBords is None:
- algo1d = bloc1.Segment(geom=facesExternes[i])
+ algo1d = bloc1.Segment(geom=facesExternes_i)
hypo1d = algo1d.NumberOfSegments(1)
putName(algo2d.GetSubMesh(), "facesExternes", i)
putName(algo2d, "algo2d_facesExternes", i)
putName(algo1d, "algo1d_facesExternes", i)
putName(hypo1d, "hypo1d_facesExternes", i)
- for i in range(len(aretesInternes)):
- algo1d = bloc1.Segment(geom=aretesInternes[i])
+ for i, aretesInternes_i in enumerate(aretesInternes):
+ algo1d = bloc1.Segment(geom=aretesInternes_i)
hypo1d = algo1d.NumberOfSegments(nbsegExt)
putName(algo1d.GetSubMesh(), "aretesInternes", i)
putName(algo1d, "algo1d_aretesInternes", i)
putName(algo1d, "algo1d_bordsLibres")
putName(hypo1d, "hypo1d_bordsLibres")
- #isDone = bloc1.Compute()
-
if not declareAlgoEllipsoideFirst:
algo3d = bloc1.Tetrahedron(algo=smeshBuilder.NETGEN,geom=ellipsoidep)
hypo3d = algo3d.MaxElementVolume(1000.0)
putName(algo3d, "algo3d_ellipsoide")
putName(hypo3d, "hypo3d_ellipsoide")
- isDone = bloc1.Compute()
-
- nbRemoved = bloc1.RemoveOrphanNodes()
-
faceFissure1 = bloc1.GroupOnGeom(faceFissure,'FACE1',SMESH.FACE)
noeudsFondFissure = bloc1.GroupOnGeom(gencnt,'nfondfis',SMESH.NODE)
- groups_faceCommuneEllipsoideBloc = []
- for i in range(len(sharedFaces)):
+ groups_faceCommuneEllipsoideBloc = list()
+ for i, sharedFaces_i in enumerate(sharedFaces):
name = "faceCommuneEllipsoideBloc_%d"%i
- groups_faceCommuneEllipsoideBloc.append(bloc1.GroupOnGeom(sharedFaces[i], name, SMESH.FACE))
- groups_faceExterneBloc = []
- for i in range(len(facesExtBloc)):
+ groups_faceCommuneEllipsoideBloc.append(bloc1.GroupOnGeom(sharedFaces_i, name, SMESH.FACE))
+ groups_faceExterneBloc = list()
+ for i, facesExtBloc_i in enumerate(facesExtBloc):
name = "faceExterneBloc_%d"%i
- groups_faceExterneBloc.append(bloc1.GroupOnGeom(facesExtBloc[i], name, SMESH.FACE))
+ groups_faceExterneBloc.append(bloc1.GroupOnGeom(facesExtBloc_i, name, SMESH.FACE))
- skinBlocMeshes = []
- for i in range(len(groups_faceCommuneEllipsoideBloc)):
+ is_done = bloc1.Compute()
+ text = "bloc1.Compute"
+ if is_done:
+ logging.info(text+" OK")
+ else:
+ text = "Erreur au calcul du maillage.\n" + text
+ logging.info(text)
+ raise Exception(text)
+
+ nbRemoved = bloc1.RemoveOrphanNodes()
+
+ skinBlocMeshes = list()
+ for i, groups_faceCommuneEllipsoideBloc_i in enumerate(groups_faceCommuneEllipsoideBloc):
name = "faceCommuneEllipsoideBloc_%d"%i
- skinBlocMeshes.append(smesh.CopyMesh(groups_faceCommuneEllipsoideBloc[i], name, 0, 0))
- for i in range(len(groups_faceExterneBloc)):
+ skinBlocMeshes.append(smesh.CopyMesh(groups_faceCommuneEllipsoideBloc_i, name, 0, 0))
+ for i, groups_faceExterneBloc_i in enumerate(groups_faceExterneBloc):
name = "faceExterneBloc_%d"%i
- skinBlocMeshes.append(smesh.CopyMesh(groups_faceExterneBloc[i], name, 0, 0))
+ skinBlocMeshes.append(smesh.CopyMesh(groups_faceExterneBloc_i, name, 0, 0))
meshesBloc = [internalBoundary.GetMesh()]
- for i in range(len(skinBlocMeshes)):
- meshesBloc.append(skinBlocMeshes[i].GetMesh())
+ for i, skinBlocMeshes_i in enumerate(skinBlocMeshes):
+ meshesBloc.append(skinBlocMeshes_i.GetMesh())
blocMesh = smesh.Concatenate(meshesBloc, 1, 1, 1e-05,False)
algo3d = blocMesh.Tetrahedron(algo=smeshBuilder.NETGEN)
putName(hypo3d, "hypo3d_bloc")
is_done = blocMesh.Compute()
+ text = "blocMesh.Compute"
+ if is_done:
+ logging.info(text+" OK")
+ else:
+ text = "Erreur au calcul du maillage.\n" + text
+ logging.info(text)
+ raise Exception(text)
blocComplet = smesh.Concatenate([bloc1.GetMesh(), blocMesh.GetMesh()], 1, 1, 1e-05,False)
- return bloc1, blocComplet
\ No newline at end of file
+ return bloc1, blocComplet
