CMake improvement: usage of SALOME_GUI_MODE() macro

[modules/smesh.git] / src / StdMeshersGUI / StdMeshersGUI_NbSegmentsCreator.cxx

diff --git a/src/StdMeshersGUI/StdMeshersGUI_NbSegmentsCreator.cxx b/src/StdMeshersGUI/StdMeshersGUI_NbSegmentsCreator.cxx
index 3e2bd4e433bb8e0cd0c68bc7dce560b64546bf77..fa4eb1dcc19f93aba7715d911075fc99ce650bb5 100644 (file)
--- a/src/StdMeshersGUI/StdMeshersGUI_NbSegmentsCreator.cxx
+++ b/src/StdMeshersGUI/StdMeshersGUI_NbSegmentsCreator.cxx
@@ -1,4 +1,4 @@
-// Copyright (C) 2007-2013  CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 //
 // Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
@@ -6,7 +6,7 @@
 // This library is free software; you can redistribute it and/or
 // modify it under the terms of the GNU Lesser General Public
 // License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
 //
 // This library is distributed in the hope that it will be useful,
 // but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -25,8 +25,11 @@
 // SMESH includes
 //
 #include "StdMeshersGUI_NbSegmentsCreator.h"
+#ifndef DISABLE_PLOT2DVIEWER
+  #include "StdMeshersGUI_DistrPreview.h"
+#endif
 #include "StdMeshersGUI_DistrTable.h"
-#include "StdMeshersGUI_DistrPreview.h"
+#include "StdMeshersGUI_PropagationHelperWdg.h"
 #include "StdMeshersGUI_SubShapeSelectorWdg.h"
 
 #include <SMESHGUI.h>
@@ -63,7 +66,9 @@ StdMeshersGUI_NbSegmentsCreator::StdMeshersGUI_NbSegmentsCreator()
   myDistr( 0 ),
   myScale( 0 ),
   myTable( 0 ),
+#ifndef DISABLE_PLOT2DVIEWER
   myPreview( 0 ),
+#endif
   myExpr( 0 ),
   myConvBox( 0 ),
   myConv( 0 ),
@@ -178,12 +183,14 @@ QFrame* StdMeshersGUI_NbSegmentsCreator::buildFrame()
   
        // c)  table
   myTable = new StdMeshersGUI_DistrTableFrame( GroupC1 );
+  myTable->setMinimumHeight(220);
   myDistLayout->addWidget( myTable, 1, 0, 2, 1 );
 
+#ifndef DISABLE_PLOT2DVIEWER
        // d) preview
   myPreview = new StdMeshersGUI_DistrPreview( GroupC1, h.in() );  
-  myPreview->setMinimumHeight(220);
   myDistLayout->addWidget( myPreview, 1, 1, 2, 1 );
+#endif
   
   // 5)  conversion (radiogroup)
   myConvBox = new QGroupBox( tr( "SMESH_CONV_MODE" ), GroupC1 );
@@ -214,21 +221,30 @@ QFrame* StdMeshersGUI_NbSegmentsCreator::buildFrame()
   QString aMainEntry = getMainShapeEntry();
   if ( aGeomEntry == "" )
     aGeomEntry = h->GetObjectEntry();
-  myDirectionWidget->SetGeomShapeEntry( aGeomEntry );
-  myDirectionWidget->SetMainShapeEntry( aMainEntry );
+  myDirectionWidget->SetGeomShapeEntry( aGeomEntry, aMainEntry );
   myDirectionWidget->SetListOfIDs( h->GetReversedEdges() );
   edgeLay->addWidget( myDirectionWidget );
 
   lay->addWidget( myReversedEdgesBox );
-  lay->setStretchFactor( GroupC1, 2);
+  lay->setStretchFactor( GroupC1, 1);
   lay->setStretchFactor( myReversedEdgesBox, 1);
-  
+
+  myReversedEdgesHelper = 0;
+  if ( !aGeomEntry.isEmpty() || !aMainEntry.isEmpty() )
+  {
+    myReversedEdgesHelper = new StdMeshersGUI_PropagationHelperWdg( myDirectionWidget, fr, false );
+    lay->addWidget( myReversedEdgesHelper );
+    lay->setStretchFactor( myReversedEdgesHelper, 1 );
+  }
+
   connect( myNbSeg, SIGNAL( valueChanged( const QString& ) ), this, SLOT( onValueChanged() ) );
   connect( myDistr, SIGNAL( activated( int ) ), this, SLOT( onValueChanged() ) );
   connect( myTable, SIGNAL( valueChanged( int, int ) ), this, SLOT( onValueChanged() ) );
   connect( myExpr,  SIGNAL( textChanged( const QString& ) ), this, SLOT( onValueChanged() ) );
   connect( myConv,  SIGNAL( buttonClicked( int ) ), this, SLOT( onValueChanged() ) );
 
+  onValueChanged();
+
   return fr;
 }
 
@@ -431,11 +447,17 @@ void StdMeshersGUI_NbSegmentsCreator::onValueChanged()
 
   myScale->setShown( distr==1 );
   myLScale->setShown( distr==1 );
-  myReversedEdgesBox->setShown( !distr==0 );
-  myDirectionWidget->showPreview( !distr==0 );
+  myReversedEdgesBox->setShown( distr!=0 );
+  if ( myReversedEdgesHelper ) {
+    myReversedEdgesHelper->Clear();
+    myReversedEdgesHelper->setShown( distr!=0 );
+  }
+  myDirectionWidget->ShowPreview( distr!=0 );
 
   bool isFunc = distr==2 || distr==3;
+#ifndef DISABLE_PLOT2DVIEWER
   myPreview->setShown( isFunc );
+#endif
   myConvBox->setShown( isFunc );
   
   myTable->setShown( distr==2 );
@@ -443,6 +465,7 @@ void StdMeshersGUI_NbSegmentsCreator::onValueChanged()
   myLExpr->setShown( distr==3 );
   myInfo->setShown( distr==3);
 
+#ifndef DISABLE_PLOT2DVIEWER
   //change of preview
   int nbSeg = myNbSeg->value();
   if( distr==2 ) //preview for table-described function
@@ -456,6 +479,7 @@ void StdMeshersGUI_NbSegmentsCreator::onValueChanged()
 
   if( isFunc )
     myPreview->setConversion( StdMeshersGUI_DistrPreview::Conversion( myConv->checkedId() ) );
+#endif
 
   if ( (QtxComboBox*)sender() == myDistr && dlg() ) {
     QApplication::instance()->processEvents();