// SMESH SMESH : implementaion of SMESH idl descriptions
//
// Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-//
-// See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+//
+// See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org
//
//
//
#include "StdMeshers_Arithmetic1D.hxx"
#include "StdMeshers_StartEndLength.hxx"
#include "StdMeshers_Deflection1D.hxx"
-#include "StdMeshers_Propagation.hxx"
#include "SMDS_MeshElement.hxx"
#include "SMDS_MeshNode.hxx"
#include "utilities.h"
#include <BRep_Tool.hxx>
-#include <BRepTools_WireExplorer.hxx>
-
#include <TopoDS_Edge.hxx>
#include <TopoDS_Shape.hxx>
-#include <TopTools_Array1OfShape.hxx>
#include <TopTools_ListIteratorOfListOfShape.hxx>
-
#include <GeomAdaptor_Curve.hxx>
#include <GCPnts_AbscissaPoint.hxx>
#include <GCPnts_UniformAbscissa.hxx>
#include <GCPnts_UniformDeflection.hxx>
-
#include <Standard_ErrorHandler.hxx>
#include <Precision.hxx>
//=============================================================================
/*!
- *
+ *
*/
//=============================================================================
//=============================================================================
/*!
- *
+ *
*/
//=============================================================================
//=============================================================================
/*!
- *
+ *
*/
//=============================================================================
return ( _hypType != NONE );
}
+//=======================================================================
+//function : compensateError
+//purpose : adjust theParams so that the last segment length == an
+//=======================================================================
+
+static void compensateError(double a1, double an,
+ double U1, double Un,
+ double length,
+ GeomAdaptor_Curve& C3d,
+ list<double> & theParams)
+{
+ int i, nPar = theParams.size();
+ if ( a1 + an < length && nPar > 1 )
+ {
+ list<double>::reverse_iterator itU = theParams.rbegin();
+ double Ul = *itU++;
+ // dist from the last point to the edge end <Un>, it should be equal <an>
+ double Ln = GCPnts_AbscissaPoint::Length( C3d, Ul, Un );
+ double dLn = an - Ln; // error of <an>
+ if ( Abs( dLn ) <= Precision::Confusion() )
+ return;
+ double dU = Abs( Ul - *itU ); // parametric length of the last but one segment
+ double dUn = dLn * Abs( Un - U1 ) / length; // parametric error of <an>
+ if ( dUn < 0.5 * dU ) { // last segment is a bit shorter than it should
+ dUn = -dUn; // move the last parameter to the edge beginning
+ }
+ else { // last segment is much shorter than it should -> remove the last param and
+ theParams.pop_back(); nPar--; // move the rest points toward the edge end
+ Ln = GCPnts_AbscissaPoint::Length( C3d, theParams.back(), Un );
+ dUn = ( an - Ln ) * Abs( Un - U1 ) / length;
+ if ( dUn < 0.5 * dU )
+ dUn = -dUn;
+ }
+ if ( U1 > Un )
+ dUn = -dUn;
+ double q = dUn / ( nPar - 1 );
+ for ( itU = theParams.rbegin(), i = 1; i < nPar; itU++, i++ ) {
+ (*itU) += dUn;
+ dUn -= q;
+ }
+ }
+}
+
//=============================================================================
/*!
- *
+ *
*/
//=============================================================================
bool StdMeshers_Regular_1D::computeInternalParameters(const TopoDS_Edge& theEdge,
- list<double> & theParams) const
+ list<double> & theParams,
+ const bool theReverse) const
{
theParams.clear();
GeomAdaptor_Curve C3d(Curve);
double length = EdgeLength(theEdge);
- //SCRUTE(length);
switch( _hypType )
{
double epsilon = 0.001;
if (fabs(_value[ SCALE_FACTOR_IND ] - 1.0) > epsilon)
{
- double alpha =
- pow( _value[ SCALE_FACTOR_IND ], 1.0 / (_value[ NB_SEGMENTS_IND ] - 1));
- double factor =
- length / (1 - pow( alpha,_value[ NB_SEGMENTS_IND ]));
+ double scale = _value[ SCALE_FACTOR_IND ];
+ if ( theReverse )
+ scale = 1. / scale;
+ double alpha = pow( scale , 1.0 / (_value[ NB_SEGMENTS_IND ] - 1));
+ double factor = (l - f) / (1 - pow( alpha,_value[ NB_SEGMENTS_IND ]));
- int i, NbPoints = (int) _value[ NB_SEGMENTS_IND ];
+ int i, NbPoints = 1 + (int) _value[ NB_SEGMENTS_IND ];
for ( i = 2; i < NbPoints; i++ )
{
- double param = factor * (1 - pow(alpha, i - 1));
+ double param = f + factor * (1 - pow(alpha, i - 1));
theParams.push_back( param );
}
return true;
double an = _value[ END_LENGTH_IND ];
double q = ( length - a1 ) / ( length - an );
- double U1 = Min ( f, l );
- double Un = Max ( f, l );
+ double U1 = theReverse ? l : f;
+ double Un = theReverse ? f : l;
double param = U1;
- double eltSize = a1;
+ double eltSize = theReverse ? -a1 : a1;
while ( 1 ) {
// computes a point on a curve <C3d> at the distance <eltSize>
// from the point of parameter <param>.
GCPnts_AbscissaPoint Discret( C3d, eltSize, param );
if ( !Discret.IsDone() ) break;
param = Discret.Parameter();
- if ( param < Un )
+ if ( param > f && param < l )
theParams.push_back( param );
else
break;
eltSize *= q;
}
- if ( a1 + an < length ) {
- // compensate error
- double Ln = GCPnts_AbscissaPoint::Length( C3d, theParams.back(), Un );
- double dLn = an - Ln;
- if ( dLn < 0.5 * an )
- dLn = -dLn;
- else {
- theParams.pop_back();
- Ln = GCPnts_AbscissaPoint::Length( C3d, theParams.back(), Un );
- dLn = an - Ln;
- if ( dLn < 0.5 * an )
- dLn = -dLn;
- }
- double dUn = dLn * ( Un - U1 ) / length;
-// SCRUTE( Ln );
-// SCRUTE( dLn );
-// SCRUTE( dUn );
- list<double>::reverse_iterator itU = theParams.rbegin();
- int i, n = theParams.size();
- for ( i = 1 ; i < n; itU++, i++ ) {
- (*itU) += dUn;
- dUn /= q;
- }
- }
-
+ compensateError( a1, an, U1, Un, length, C3d, theParams );
return true;
}
- case DEFLECTION: {
-
- GCPnts_UniformDeflection Discret(C3d, _value[ DEFLECTION_IND ], true);
- if ( !Discret.IsDone() )
- return false;
-
- int NbPoints = Discret.NbPoints();
- for ( int i = 2; i < NbPoints; i++ )
- {
- double param = Discret.Parameter(i);
- theParams.push_back( param );
- }
- return true;
-
- }
-
case ARITHMETIC_1D: {
- // arithmetic progression: SUM(n) = ( an - a1 + q ) * ( a1 + an ) / ( 2 * q ) = length
+
+ // arithmetic progression: SUM(n) = ( an - a1 + q ) * ( a1 + an ) / ( 2 * q ) = length
double a1 = _value[ BEG_LENGTH_IND ];
double an = _value[ END_LENGTH_IND ];
- double nd = (2 * length) / (an + a1) - 1;
- int n = int(nd);
- if(n != nd)
- n++;
+ double q = ( an - a1 ) / ( 2 *length/( a1 + an ) - 1 );
+ int n = int( 1 + ( an - a1 ) / q );
- double q = ((2 * length) / (n + 1) - 2 * a1) / n;
- double U1 = Min ( f, l );
- double Un = Max ( f, l );
+ double U1 = theReverse ? l : f;
+ double Un = theReverse ? f : l;
double param = U1;
double eltSize = a1;
-
- double L=0;
- while ( 1 ) {
- L+=eltSize;
+ if ( theReverse ) {
+ eltSize = -eltSize;
+ q = -q;
+ }
+ while ( n-- > 0 && eltSize * ( Un - U1 ) > 0 ) {
// computes a point on a curve <C3d> at the distance <eltSize>
// from the point of parameter <param>.
GCPnts_AbscissaPoint Discret( C3d, eltSize, param );
if ( !Discret.IsDone() ) break;
param = Discret.Parameter();
- if ( fabs(param - Un) > Precision::Confusion() && param < Un) {
+ if ( param > f && param < l )
theParams.push_back( param );
- }
else
break;
eltSize += q;
}
+ compensateError( a1, an, U1, Un, length, C3d, theParams );
return true;
}
+ case DEFLECTION: {
+
+ GCPnts_UniformDeflection Discret(C3d, _value[ DEFLECTION_IND ], true);
+ if ( !Discret.IsDone() )
+ return false;
+
+ int NbPoints = Discret.NbPoints();
+ for ( int i = 2; i < NbPoints; i++ )
+ {
+ double param = Discret.Parameter(i);
+ theParams.push_back( param );
+ }
+ return true;
+
+ }
+
default:;
}
//=============================================================================
/*!
- *
+ *
*/
//=============================================================================
if (!Curve.IsNull())
{
list< double > params;
+ bool reversed = false;
+ if ( !_mainEdge.IsNull() )
+ reversed = aMesh.IsReversedInChain( EE, _mainEdge );
try {
- if ( ! computeInternalParameters( E, params ))
+ if ( ! computeInternalParameters( E, params, reversed ))
return false;
}
catch ( Standard_Failure ) {
// only internal nodes receive an edge position with param on curve
const SMDS_MeshNode * idPrev = idFirst;
-
+
for (list<double>::iterator itU = params.begin(); itU != params.end(); itU++)
{
double param = *itU;
SMDS_MeshNode * node = meshDS->AddNode(P.X(), P.Y(), P.Z());
meshDS->SetNodeOnEdge(node, E);
- // **** edgePosition associe au point = param.
+ // **** edgePosition associe au point = param.
SMDS_EdgePosition* epos =
dynamic_cast<SMDS_EdgePosition *>(node->GetPosition().get());
epos->SetUParameter(param);
//=============================================================================
/*!
- * GetUsedHypothesis
+ * See comments in SMESH_Algo.cxx
*/
//=============================================================================
-const list <const SMESHDS_Hypothesis *> & StdMeshers_Regular_1D::GetUsedHypothesis
- (SMESH_Mesh & aMesh, const TopoDS_Shape & aShape)
+const list <const SMESHDS_Hypothesis *> & StdMeshers_Regular_1D::GetUsedHypothesis(
+ SMESH_Mesh & aMesh, const TopoDS_Shape & aShape)
{
_usedHypList.clear();
- _usedHypList = GetAppliedHypothesis(aMesh, aShape); // copy
+ _usedHypList = GetAppliedHypothesis(aMesh, aShape); // copy
int nbHyp = _usedHypList.size();
-
- // try to find being propagated hypothesis
- string propName = StdMeshers_Propagation::GetName();
- if (nbHyp == 0) {
- // Get all opposite edges
- TopTools_ListOfShape anOppositeEdges;
- TopoDS_Shape mainShape = aMesh.GetMeshDS()->ShapeToMesh();
- GetOppositeEdges(mainShape, aShape, anOppositeEdges);
- TopTools_ListIteratorOfListOfShape oppIt (anOppositeEdges);
- for (; oppIt.More(); oppIt.Next()) {
- const TopoDS_Shape& oppE = oppIt.Value();
-
- // Find Propagation hypothesis on the opposite edge
- if (IsPropagated(aMesh, oppE)) {
-
- // Get hypothesis, used by the opposite edge
- _usedHypList = SMESH_Algo::GetUsedHypothesis(aMesh, oppE);
- nbHyp = _usedHypList.size();
- if (nbHyp == 1)
- break;
- }
+ _mainEdge.Nullify();
+ if (nbHyp == 0)
+ {
+ // Check, if propagated from some other edge
+ if (aShape.ShapeType() == TopAbs_EDGE &&
+ aMesh.IsPropagatedHypothesis(aShape, _mainEdge))
+ {
+ // Propagation of 1D hypothesis from <aMainEdge> on this edge
+ //_usedHypList = GetAppliedHypothesis(aMesh, _mainEdge); // copy
+ // use a general method in order not to nullify _mainEdge
+ _usedHypList = SMESH_Algo::GetUsedHypothesis(aMesh, _mainEdge); // copy
+ nbHyp = _usedHypList.size();
}
}
-
- // try to find relevant 1D hypothesis on ancestors
- if (nbHyp == 0) {
- TopTools_ListIteratorOfListOfShape ancIt (aMesh.GetAncestors(aShape));
- for (; ancIt.More(); ancIt.Next()) {
+ if (nbHyp == 0)
+ {
+ TopTools_ListIteratorOfListOfShape ancIt( aMesh.GetAncestors( aShape ));
+ for (; ancIt.More(); ancIt.Next())
+ {
const TopoDS_Shape& ancestor = ancIt.Value();
- _usedHypList = GetAppliedHypothesis(aMesh, ancestor); // copy
+ _usedHypList = GetAppliedHypothesis(aMesh, ancestor); // copy
nbHyp = _usedHypList.size();
if (nbHyp == 1)
break;
}
}
-
if (nbHyp > 1)
- _usedHypList.clear(); //only one compatible hypothesis allowed
+ _usedHypList.clear(); //only one compatible hypothesis allowed
return _usedHypList;
}
//=============================================================================
/*!
- * Is Propagation hypothesis assigned to theShape or its ancestors
- */
-//=============================================================================
-Standard_Boolean StdMeshers_Regular_1D::IsPropagated (SMESH_Mesh & theMesh,
- const TopoDS_Shape & theShape)
-{
- const SMESHDS_Mesh * meshDS = theMesh.GetMeshDS();
-
- // try to find Propagation hypothesis on theShape
- const list<const SMESHDS_Hypothesis*> & listHyp = meshDS->GetHypothesis(theShape);
-
- list<const SMESHDS_Hypothesis*>::const_iterator it = listHyp.begin();
- for (; it != listHyp.end(); it++) {
- const SMESHDS_Hypothesis *anHyp = *it;
- if (anHyp->GetName() == StdMeshers_Propagation::GetName())
- return Standard_True;
- }
-
- // try to find Propagation hypothesis on ancestors
- TopTools_ListIteratorOfListOfShape ancIt (theMesh.GetAncestors(theShape));
- for (; ancIt.More(); ancIt.Next()) {
- const TopoDS_Shape& ancestor = ancIt.Value();
- const list<const SMESHDS_Hypothesis*> & listAncHyp = meshDS->GetHypothesis(ancestor);
-
- list<const SMESHDS_Hypothesis*>::const_iterator itAnc = listAncHyp.begin();
- for (; itAnc != listAncHyp.end(); itAnc++) {
- const SMESHDS_Hypothesis *anHyp = *itAnc;
- if (anHyp->GetName() == StdMeshers_Propagation::GetName())
- return Standard_True;
- }
- }
-
- return Standard_False;
-}
-
-//=============================================================================
-/*!
- * GetOppositeEdges() - get all edges of theShape,
- * laying on any quadrangle face in front of theEdge
- */
-//=============================================================================
-void StdMeshers_Regular_1D::GetOppositeEdges (const TopoDS_Shape& theShape,
- const TopoDS_Shape& theEdge,
- TopTools_ListOfShape& theOppositeEdges) const
-{
- TopExp_Explorer aWires (theShape, TopAbs_WIRE);
- for (; aWires.More(); aWires.Next()) {
- const TopoDS_Shape& aWire = aWires.Current();
- BRepTools_WireExplorer aWE (TopoDS::Wire(aWire));
- Standard_Integer nb = 1, found = 0;
- TopTools_Array1OfShape anEdges (1,4);
- for (; aWE.More(); aWE.Next(), nb++) {
- if (nb > 4) {
- found = 0;
- break;
- }
- anEdges(nb) = aWE.Current();
- if (anEdges(nb).IsSame(theEdge))
- found = nb;
- }
- if (nb == 5 && found > 0) {
- Standard_Integer opp = found + 2;
- if (opp > 4) opp -= 4;
- theOppositeEdges.Append(anEdges(opp));
- }
- }
-}
-
-//=============================================================================
-/*!
- *
+ *
*/
//=============================================================================
//=============================================================================
/*!
- *
+ *
*/
//=============================================================================
//=============================================================================
/*!
- *
+ *
*/
//=============================================================================
//=============================================================================
/*!
- *
+ *
*/
//=============================================================================