Copyrights update 2015.

[modules/smesh.git] / src / StdMeshers / StdMeshers_Projection_3D.cxx

diff --git a/src/StdMeshers/StdMeshers_Projection_3D.cxx b/src/StdMeshers/StdMeshers_Projection_3D.cxx
index 76c29c82215f3cc96ac1a6784801c970ff30fbcc..e6a76eddc8eb5d9a7a248ccdccf8f87b5869f9d5 100644 (file)
--- a/src/StdMeshers/StdMeshers_Projection_3D.cxx
+++ b/src/StdMeshers/StdMeshers_Projection_3D.cxx
@@ -1,4 +1,4 @@
-// Copyright (C) 2007-2012  CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 //
 // Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
@@ -6,7 +6,7 @@
 // This library is free software; you can redistribute it and/or
 // modify it under the terms of the GNU Lesser General Public
 // License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
 //
 // This library is distributed in the hope that it will be useful,
 // but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -57,7 +57,7 @@
 // cout << msg << " ("<< p.X() << "; " <<p.Y() << "; " <<p.Z() << ") " <<endl;\
 // }
 
-typedef StdMeshers_ProjectionUtils TAssocTool;
+namespace TAssocTool = StdMeshers_ProjectionUtils;
 
 
 //=======================================================================
@@ -219,13 +219,13 @@ bool StdMeshers_Projection_3D::Compute(SMESH_Mesh& aMesh, const TopoDS_Shape& aS
                  SMESH_Comment("Target shape must have 1 shell but not ") << nbShell);
 
   // Check that shapes are blocks
-  if ( TAssocTool::Count( tgtShell, TopAbs_FACE , 1 ) != 6 ||
-       TAssocTool::Count( tgtShell, TopAbs_EDGE , 1 ) != 12 ||
-       TAssocTool::Count( tgtShell, TopAbs_WIRE , 1 ) != 6 )
+  if ( SMESH_MesherHelper::Count( tgtShell, TopAbs_FACE , 1 ) != 6 ||
+       SMESH_MesherHelper::Count( tgtShell, TopAbs_EDGE , 1 ) != 12 ||
+       SMESH_MesherHelper::Count( tgtShell, TopAbs_WIRE , 1 ) != 6 )
     return error(COMPERR_BAD_SHAPE, "Target shape is not a block");
-  if ( TAssocTool::Count( srcShell, TopAbs_FACE , 1 ) != 6 ||
-       TAssocTool::Count( srcShell, TopAbs_EDGE , 1 ) != 12 ||
-       TAssocTool::Count( srcShell, TopAbs_WIRE , 1 ) != 6 )
+  if ( SMESH_MesherHelper::Count( srcShell, TopAbs_FACE , 1 ) != 6 ||
+       SMESH_MesherHelper::Count( srcShell, TopAbs_EDGE , 1 ) != 12 ||
+       SMESH_MesherHelper::Count( srcShell, TopAbs_WIRE , 1 ) != 6 )
     return error(COMPERR_BAD_SHAPE, "Source shape is not a block");
 
   // Assure that mesh on a source shape is computed
@@ -233,13 +233,14 @@ bool StdMeshers_Projection_3D::Compute(SMESH_Mesh& aMesh, const TopoDS_Shape& aS
   SMESH_subMesh* srcSubMesh = srcMesh->GetSubMesh( _sourceHypo->GetSource3DShape() );
   //SMESH_subMesh* tgtSubMesh = tgtMesh->GetSubMesh( aShape );
 
-  if ( tgtMesh == srcMesh && !aShape.IsSame( _sourceHypo->GetSource3DShape() )) {
+  string srcMeshError;
+  if ( tgtMesh == srcMesh  && !aShape.IsSame( _sourceHypo->GetSource3DShape() )) {
     if ( !TAssocTool::MakeComputed( srcSubMesh ))
-      return error(COMPERR_BAD_INPUT_MESH,"Source mesh not computed");
+      srcMeshError = TAssocTool::SourceNotComputedError( srcSubMesh, this );
   }
   else {
     if ( !srcSubMesh->IsMeshComputed() )
-      return error(COMPERR_BAD_INPUT_MESH,"Source mesh not computed");
+      srcMeshError = TAssocTool::SourceNotComputedError();
   }
 
   // Find 2 pairs of corresponding vertices
@@ -296,17 +297,17 @@ bool StdMeshers_Projection_3D::Compute(SMESH_Mesh& aMesh, const TopoDS_Shape& aS
       SMESH_Block::GetFaceEdgesIDs( fId, edgeIdVec );
       for ( int i = 0; i < edgeIdVec.size(); ++i ) {
         int eID = edgeIdVec[ i ];
-        shape2ShapeMap.Bind( tgtShapes( eID ), scrShapes( eID ));
+        shape2ShapeMap.Bind( scrShapes( eID ), tgtShapes( eID ));
         if ( i < 2 ) {
           vector< int > vertexIdVec;
           SMESH_Block::GetEdgeVertexIDs( eID, vertexIdVec );
-          shape2ShapeMap.Bind( tgtShapes( vertexIdVec[0] ), scrShapes( vertexIdVec[0] ));
-          shape2ShapeMap.Bind( tgtShapes( vertexIdVec[1] ), scrShapes( vertexIdVec[1] ));
+          shape2ShapeMap.Bind( scrShapes( vertexIdVec[0]), tgtShapes( vertexIdVec[0]) );
+          shape2ShapeMap.Bind( scrShapes( vertexIdVec[1]), tgtShapes( vertexIdVec[1]) );
         }
       }
     }
     // Find matching nodes of tgt and src faces
-    TNodeNodeMap faceMatchingNodes;
+    TAssocTool::TNodeNodeMap faceMatchingNodes;
     if ( ! TAssocTool::FindMatchingNodesOnFaces( srcFace, srcMesh, tgtFace, tgtMesh, 
                                                  shape2ShapeMap, faceMatchingNodes ))
       return error(COMPERR_BAD_INPUT_MESH,SMESH_Comment("Mesh on faces #")
@@ -459,13 +460,13 @@ bool StdMeshers_Projection_3D::Evaluate(SMESH_Mesh& aMesh,
                  SMESH_Comment("Target shape must have 1 shell but not ") << nbShell);
 
   // Check that shapes are blocks
-  if ( TAssocTool::Count( tgtShell, TopAbs_FACE , 1 ) != 6 ||
-       TAssocTool::Count( tgtShell, TopAbs_EDGE , 1 ) != 12 ||
-       TAssocTool::Count( tgtShell, TopAbs_WIRE , 1 ) != 6 )
+  if ( SMESH_MesherHelper::Count( tgtShell, TopAbs_FACE , 1 ) != 6 ||
+       SMESH_MesherHelper::Count( tgtShell, TopAbs_EDGE , 1 ) != 12 ||
+       SMESH_MesherHelper::Count( tgtShell, TopAbs_WIRE , 1 ) != 6 )
     return error(COMPERR_BAD_SHAPE, "Target shape is not a block");
-  if ( TAssocTool::Count( srcShell, TopAbs_FACE , 1 ) != 6 ||
-       TAssocTool::Count( srcShell, TopAbs_EDGE , 1 ) != 12 ||
-       TAssocTool::Count( srcShell, TopAbs_WIRE , 1 ) != 6 )
+  if ( SMESH_MesherHelper::Count( srcShell, TopAbs_FACE , 1 ) != 6 ||
+       SMESH_MesherHelper::Count( srcShell, TopAbs_EDGE , 1 ) != 12 ||
+       SMESH_MesherHelper::Count( srcShell, TopAbs_WIRE , 1 ) != 6 )
     return error(COMPERR_BAD_SHAPE, "Source shape is not a block");
 
   // Assure that mesh on a source shape is computed