-// Copyright (C) 2007-2012 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2014 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
#include "StdMeshers_ProjectionSource2D.hxx"
#include "StdMeshers_ProjectionSource3D.hxx"
+#include "SMDS_EdgePosition.hxx"
#include "SMESH_Algo.hxx"
#include "SMESH_Block.hxx"
#include "SMESH_Gen.hxx"
+#include "SMESH_HypoFilter.hxx"
#include "SMESH_Hypothesis.hxx"
#include "SMESH_Mesh.hxx"
#include "SMESH_MesherHelper.hxx"
#include "SMESH_subMesh.hxx"
#include "SMESH_subMeshEventListener.hxx"
-#include "SMDS_EdgePosition.hxx"
+#include "SMESH_MeshAlgos.hxx"
#include "utilities.h"
// cout << endl;\
// }
-#define HERE StdMeshers_ProjectionUtils
+namespace HERE = StdMeshers_ProjectionUtils;
namespace {
*/
//================================================================================
- bool _StoreBadShape(const TopoDS_Shape& shape)
+ bool storeShapeForDebug(const TopoDS_Shape& shape)
{
#ifdef _DEBUG_
const char* type[] ={"COMPOUND","COMPSOLID","SOLID","SHELL","FACE","WIRE","EDGE","VERTEX"};
*/
//================================================================================
- void Reverse( list< TopoDS_Edge > & edges, const int nbEdges, const int firstEdge=0)
+ void reverseEdges( list< TopoDS_Edge > & edges, const int nbEdges, const int firstEdge=0)
{
SHOW_LIST("BEFORE REVERSE", edges);
*/
//================================================================================
- bool IsPropagationPossible( SMESH_Mesh* theMesh1, SMESH_Mesh* theMesh2 )
+ bool isPropagationPossible( SMESH_Mesh* theMesh1, SMESH_Mesh* theMesh2 )
{
if ( theMesh1 != theMesh2 ) {
TopoDS_Shape mainShape1 = theMesh1->GetMeshDS()->ShapeToMesh();
*/
//================================================================================
- bool FixAssocByPropagation( const int nbEdges,
+ bool fixAssocByPropagation( const int nbEdges,
list< TopoDS_Edge > & edges1,
list< TopoDS_Edge > & edges2,
SMESH_Mesh* theMesh1,
SMESH_Mesh* theMesh2)
{
- if ( nbEdges == 2 && IsPropagationPossible( theMesh1, theMesh2 ) )
+ if ( nbEdges == 2 && isPropagationPossible( theMesh1, theMesh2 ) )
{
list< TopoDS_Edge >::iterator eIt2 = ++edges2.begin(); // 2nd edge of the 2nd face
TopoDS_Edge edge2 = HERE::GetPropagationEdge( theMesh1, *eIt2, edges1.front() ).second;
if ( !edge2.IsNull() ) { // propagation found for the second edge
- Reverse( edges2, nbEdges );
+ reverseEdges( edges2, nbEdges );
return true;
}
}
return false;
}
+ //================================================================================
+ /*!
+ * \brief Associate faces having one edge in the outer wire.
+ * No check is done if there is really only one outer edge
+ */
+ //================================================================================
+
+ bool assocFewEdgesFaces( const TopoDS_Face& face1,
+ SMESH_Mesh* mesh1,
+ const TopoDS_Face& face2,
+ SMESH_Mesh* mesh2,
+ HERE::TShapeShapeMap & theMap)
+ {
+ TopoDS_Vertex v1 = TopoDS::Vertex( HERE::OuterShape( face1, TopAbs_VERTEX ));
+ TopoDS_Vertex v2 = TopoDS::Vertex( HERE::OuterShape( face2, TopAbs_VERTEX ));
+ TopoDS_Vertex VV1[2] = { v1, v1 };
+ TopoDS_Vertex VV2[2] = { v2, v2 };
+ list< TopoDS_Edge > edges1, edges2;
+ if ( int nbE = HERE::FindFaceAssociation( face1, VV1, face2, VV2, edges1, edges2 ))
+ {
+ HERE::InsertAssociation( face1, face2, theMap );
+ fixAssocByPropagation( nbE, edges1, edges2, mesh1, mesh2 );
+ list< TopoDS_Edge >::iterator eIt1 = edges1.begin();
+ list< TopoDS_Edge >::iterator eIt2 = edges2.begin();
+ for ( ; eIt1 != edges1.end(); ++eIt1, ++eIt2 )
+ {
+ HERE::InsertAssociation( *eIt1, *eIt2, theMap );
+ v1 = SMESH_MesherHelper::IthVertex( 0, *eIt1 );
+ v2 = SMESH_MesherHelper::IthVertex( 0, *eIt2 );
+ HERE::InsertAssociation( v1, v2, theMap );
+ }
+ return true;
+ }
+ return false;
+ }
+
//================================================================================
/*!
* \brief Look for a group containing a target shape and similar to a source group
*/
//================================================================================
- TopoDS_Shape FindGroupContaining(const TopoDS_Shape& tgtShape,
+ TopoDS_Shape findGroupContaining(const TopoDS_Shape& tgtShape,
const SMESH_Mesh* tgtMesh1,
const TopoDS_Shape& srcGroup)
{
list<SMESH_subMesh*> subMeshes = tgtMesh1->GetGroupSubMeshesContaining(tgtShape);
list<SMESH_subMesh*>::iterator sm = subMeshes.begin();
int type, last = TopAbs_SHAPE;
- StdMeshers_ProjectionUtils util;
for ( ; sm != subMeshes.end(); ++sm ) {
const TopoDS_Shape & group = (*sm)->GetSubShape();
// check if group is similar to srcGroup
for ( type = srcGroup.ShapeType(); type < last; ++type)
- if ( util.Count( srcGroup, (TopAbs_ShapeEnum)type, 0) !=
- util.Count( group, (TopAbs_ShapeEnum)type, 0))
+ if ( SMESH_MesherHelper::Count( srcGroup, (TopAbs_ShapeEnum)type, 0) !=
+ SMESH_MesherHelper::Count( group, (TopAbs_ShapeEnum)type, 0))
break;
if ( type == last )
return group;
*/
//================================================================================
- bool AssocGroupsByPropagation(const TopoDS_Shape& theGroup1,
+ bool assocGroupsByPropagation(const TopoDS_Shape& theGroup1,
const TopoDS_Shape& theGroup2,
SMESH_Mesh& theMesh,
HERE::TShapeShapeMap& theMap)
// get edges of the face
TopoDS_Edge edgeGr1, edgeGr2, verticEdge2;
list< TopoDS_Edge > edges; list< int > nbEdgesInWire;
- SMESH_Block::GetOrderedEdges( face, v1, edges, nbEdgesInWire);
+ SMESH_Block::GetOrderedEdges( face, edges, nbEdgesInWire, v1);
if ( nbEdgesInWire.front() != 4 )
- return _StoreBadShape( face );
+ return storeShapeForDebug( face );
list< TopoDS_Edge >::iterator edge = edges.begin();
if ( verticEdge.IsSame( *edge )) {
edgeGr2 = *(++edge);
} // namespace
//=======================================================================
-/*!
- * \brief Looks for association of all sub-shapes of two shapes
- * \param theShape1 - target shape
- * \param theMesh1 - mesh built on shape 1
- * \param theShape2 - source shape
- * \param theMesh2 - mesh built on shape 2
- * \param theAssociation - association map to be filled that may
- * contain association of one or two pairs of vertices
- * \retval bool - true if association found
+/*
+ * Looks for association of all sub-shapes of two shapes
+ * \param theShape1 - target shape
+ * \param theMesh1 - mesh built on shape 1
+ * \param theShape2 - source shape
+ * \param theMesh2 - mesh built on shape 2
+ * \param theAssociation - association map to be filled that may
+ * contain association of one or two pairs of vertices
+ * \retval bool - true if association found
*/
//=======================================================================
TShapeShapeMap & theMap)
{
// Structure of this long function is following
- // 1) Group->group projection: theShape1 is a group member,
- // theShape2 is a group. We find a group theShape1 is in and recall self.
+ // 1) Group -> Group projection: theShape1 is a group member,
+ // theShape2 is another group. We find a group theShape1 is in and recall self.
// 2) Accosiate same shapes with different location (partners).
// 3) If vertex association is given, perform accosiation according to shape type:
// switch ( ShapeType ) {
TopoDS_Shape group1, group2;
if ( theShape1.ShapeType() == TopAbs_COMPOUND ) {
group1 = theShape1;
- group2 = FindGroupContaining( theShape2, theMesh2, group1 );
+ group2 = findGroupContaining( theShape2, theMesh2, group1 );
}
else if ( theShape2.ShapeType() == TopAbs_COMPOUND ) {
group2 = theShape2;
- group1 = FindGroupContaining( theShape1, theMesh1, group2 );
+ group1 = findGroupContaining( theShape1, theMesh1, group2 );
}
if ( group1.IsNull() || group2.IsNull() )
RETURN_BAD_RESULT("Different shape types");
TShapePairsList::iterator s1_s2 = shapesQueue.begin();
for ( ; s1_s2 != shapesQueue.end(); ++s1_s2 )
{
+ if ( theMap.IsBound( s1_s2->first )) // avoid re-binding for a seam edge
+ continue; // to avoid this: Forward seam -> Reversed seam
InsertAssociation( s1_s2->first, s1_s2->second, theMap );
TopoDS_Iterator s1It( s1_s2->first), s2It( s1_s2->second );
for ( ; s1It.More(); s1It.Next(), s2It.Next() )
list< TopoDS_Edge > edges1, edges2;
int nbE = FindFaceAssociation( face1, VV1, face2, VV2, edges1, edges2 );
if ( !nbE ) RETURN_BAD_RESULT("FindFaceAssociation() failed");
- FixAssocByPropagation( nbE, edges1, edges2, theMesh1, theMesh2 );
+ fixAssocByPropagation( nbE, edges1, edges2, theMesh1, theMesh2 );
list< TopoDS_Edge >::iterator eIt1 = edges1.begin();
list< TopoDS_Edge >::iterator eIt2 = edges2.begin();
TopTools_ListIteratorOfListOfShape ancestIt1( edgeToFace1.FindFromKey( edge1 ));
for ( ; F1.IsNull() && ancestIt1.More(); ancestIt1.Next() )
if ( ancestIt1.Value().ShapeType() == TopAbs_FACE )
- F1 = ancestIt1.Value().Oriented( TopAbs_FORWARD );
+ F1 = ancestIt1.Value().Oriented //( TopAbs_FORWARD );
+ ( SMESH_MesherHelper::GetSubShapeOri( theShape1, ancestIt1.Value() ));
if ( F1.IsNull() )
RETURN_BAD_RESULT(" Face1 not found");
TopTools_ListIteratorOfListOfShape ancestIt2( edgeToFace2.FindFromKey( edge2 ));
for ( int i = 0; FF2[1].IsNull() && ancestIt2.More(); ancestIt2.Next() )
if ( ancestIt2.Value().ShapeType() == TopAbs_FACE )
- FF2[ i++ ] = ancestIt2.Value().Oriented( TopAbs_FORWARD );
+ FF2[ i++ ] = ancestIt2.Value().Oriented // ( TopAbs_FORWARD );
+ ( SMESH_MesherHelper::GetSubShapeOri( theShape2, ancestIt2.Value() ));
// get oriented edge1 and edge2 from F1 and FF2[0]
for ( exp.Init( F1, TopAbs_EDGE ); exp.More(); exp.Next() )
" to " << theMesh2->GetMeshDS()->ShapeToIndex( face2 ));
if ( nbE == 2 && (edge1.IsSame( edges1.front())) != (edge2.IsSame( edges2.front())))
{
- Reverse( edges2, nbE );
+ reverseEdges( edges2, nbE );
}
list< TopoDS_Edge >::iterator eIt1 = edges1.begin();
list< TopoDS_Edge >::iterator eIt2 = edges2.begin();
{
if ( !boundEdges.Add( *eIt1 )) continue; // already associated
InsertAssociation( *eIt1, *eIt2, theMap ); // assoc edges
- MESSAGE("Assoc edge " << theMesh1->GetMeshDS()->ShapeToIndex( *eIt1 )<<
- " to " << theMesh2->GetMeshDS()->ShapeToIndex( *eIt2 ));
VV1[0] = TopExp::FirstVertex( *eIt1, true );
VV2[0] = TopExp::FirstVertex( *eIt2, true );
InsertAssociation( VV1[0], VV2[0], theMap ); // assoc vertices
- MESSAGE("Assoc vertex " << theMesh1->GetMeshDS()->ShapeToIndex( VV1[0] )<<
- " to " << theMesh2->GetMeshDS()->ShapeToIndex( VV2[0] ));
// add adjacent faces to process
TopoDS_Face nextFace1 = GetNextFace( edgeToFace1, *eIt1, face1 );
// Maybe groups contain only one member
TopoDS_Iterator it1( theShape1 ), it2( theShape2 );
TopAbs_ShapeEnum memberType = it1.Value().ShapeType();
- int nbMembers = Count( theShape1, memberType, true );
+ int nbMembers = SMESH_MesherHelper::Count( theShape1, memberType, true );
if ( nbMembers == 0 ) return true;
if ( nbMembers == 1 ) {
return FindSubShapeAssociation( it1.Value(), theMesh1, it2.Value(), theMesh2, theMap );
if ( groupEdges[ is2ndGroup ].Contains( f.Current() ))
if ( ++nbGroupEdges > 1 )
break;
- bool add = (nbGroupEdges > 1 || Count( face, TopAbs_EDGE, true ) == 1 );
+ bool add = (nbGroupEdges > 1 ||
+ SMESH_MesherHelper::Count( face, TopAbs_EDGE, true ) == 1 );
if ( !add ) {
add = true;
for ( TopExp_Explorer v( face, TopAbs_VERTEX ); add && v.More(); v.Next())
}
// Associate shells
//
- int nbFaces1 = Count( shell1, TopAbs_FACE, 0 );
- int nbFaces2 = Count( shell2, TopAbs_FACE, 0 );
+ int nbFaces1 = SMESH_MesherHelper:: Count( shell1, TopAbs_FACE, 0 );
+ int nbFaces2 = SMESH_MesherHelper:: Count( shell2, TopAbs_FACE, 0 );
if ( nbFaces1 != nbFaces2 )
RETURN_BAD_RESULT("Different nb of faces found for shells");
if ( nbFaces1 > 0 ) {
// ----------------------------------------------------------------------
TopoDS_Edge edge1 = TopoDS::Edge( theShape1 );
TopoDS_Edge edge2 = TopoDS::Edge( theShape2 );
- if ( IsPropagationPossible( theMesh1, theMesh2 ))
+ if ( isPropagationPossible( theMesh1, theMesh2 ))
{
TopoDS_Edge prpEdge = GetPropagationEdge( theMesh1, edge2, edge1 ).second;
if ( !prpEdge.IsNull() )
case TopAbs_FACE: {
// ----------------------------------------------------------------------
- if ( IsPropagationPossible( theMesh1, theMesh2 )) // try by propagation in one mesh
+ if ( isPropagationPossible( theMesh1, theMesh2 )) // try by propagation in one mesh
{
TopoDS_Face face1 = TopoDS::Face(theShape1);
TopoDS_Face face2 = TopoDS::Face(theShape2);
if ( face2.Orientation() >= TopAbs_INTERNAL ) face2.Orientation( TopAbs_FORWARD );
TopoDS_Edge edge1, edge2;
// get outer edge of theShape1
- edge1 = TopoDS::Edge( OuterShape( face1, TopAbs_EDGE ));
- // find out if any edge of face2 is a propagation edge of outer edge1
- map<int,TopoDS_Edge> propag_edges; // use map to find the closest propagation edge
- for ( TopExp_Explorer exp( face2, TopAbs_EDGE ); exp.More(); exp.Next() ) {
- edge2 = TopoDS::Edge( exp.Current() );
- pair<int,TopoDS_Edge> step_edge = GetPropagationEdge( theMesh1, edge2, edge1 );
- if ( !step_edge.second.IsNull() ) { // propagation found
- propag_edges.insert( step_edge );
- if ( step_edge.first == 1 ) break; // most close found
+ TopoDS_Shape wire = OuterShape( face1, TopAbs_WIRE );
+ //edge1 = TopoDS::Edge( OuterShape( face1, TopAbs_EDGE ));
+ // use map to find the closest propagation edge
+ map<int, pair< TopoDS_Edge, TopoDS_Edge > > propag_edges;
+ for ( TopoDS_Iterator edgeIt( wire ); edgeIt.More(); edgeIt.Next() )
+ {
+ edge1 = TopoDS::Edge( edgeIt.Value() );
+ // find out if any edge of face2 is a propagation edge of outer edge1
+ for ( TopExp_Explorer exp( face2, TopAbs_EDGE ); exp.More(); exp.Next() ) {
+ edge2 = TopoDS::Edge( exp.Current() );
+ pair<int,TopoDS_Edge> step_edge = GetPropagationEdge( theMesh1, edge2, edge1 );
+ if ( !step_edge.second.IsNull() ) { // propagation found
+ propag_edges.insert( make_pair( step_edge.first,
+ ( make_pair( edge1, step_edge.second ))));
+ if ( step_edge.first == 1 ) break; // most close found
+ }
}
+ if ( !propag_edges.empty() && propag_edges.begin()->first == 1 ) break;
}
if ( !propag_edges.empty() ) // propagation found
{
- edge2 = propag_edges.begin()->second;
+ edge1 = propag_edges.begin()->second.first;
+ edge2 = propag_edges.begin()->second.second;
TopoDS_Vertex VV1[2], VV2[2];
TopExp::Vertices( edge1, VV1[0], VV1[1], true );
TopExp::Vertices( edge2, VV2[0], VV2[1], true );
bool same2 = edge2.IsSame( edges2.front() );
if ( same1 != same2 )
{
- Reverse(edges2, nbE);
+ reverseEdges(edges2, nbE);
if ( nbE != 2 ) // 2 degen edges of 4 (issue 0021144)
edges2.splice( edges2.end(), edges2, edges2.begin());
}
}
case TopAbs_COMPOUND: {
// ----------------------------------------------------------------------
- if ( IsPropagationPossible( theMesh1, theMesh2 )) {
+ if ( isPropagationPossible( theMesh1, theMesh2 )) {
// try to accosiate all using propagation
- if ( AssocGroupsByPropagation( theShape1, theShape2, *theMesh1, theMap ))
+ if ( assocGroupsByPropagation( theShape1, theShape2, *theMesh1, theMap ))
return true;
// find a boundary edge of theShape1
TopoDS_Vertex VV1[2], VV2[2];
if ( vMap1.Extent() != vMap2.Extent() )
- RETURN_BAD_RESULT("Different nb of vertices");
+ {
+ if ( SMESH_MesherHelper:: Count( theShape1, TopAbs_EDGE, /*ignoreSame=*/false ) !=
+ SMESH_MesherHelper:: Count( theShape2, TopAbs_EDGE, /*ignoreSame=*/false ))
+ RETURN_BAD_RESULT("Different nb of vertices");
+ }
- if ( vMap1.Extent() == 1 ) {
+ if ( vMap1.Extent() == 1 || vMap2.Extent() == 1 ) {
InsertAssociation( vMap1(1), vMap2(1), theMap );
if ( theShape1.ShapeType() == TopAbs_EDGE ) {
+ if ( vMap1.Extent() == 2 )
+ InsertAssociation( vMap1(2), vMap2(1), theMap );
+ else if ( vMap2.Extent() == 2 )
+ InsertAssociation( vMap2(2), vMap1(1), theMap );
InsertAssociation( theShape1, theShape2, theMap );
return true;
}
// Find transformation to make the shapes be of similar size at same location
Bnd_Box box[2];
- for ( int i = 1; i <= vMap1.Extent(); ++i ) {
+ for ( int i = 1; i <= vMap1.Extent(); ++i )
box[ 0 ].Add( BRep_Tool::Pnt ( TopoDS::Vertex( vMap1( i ))));
+ for ( int i = 1; i <= vMap2.Extent(); ++i )
box[ 1 ].Add( BRep_Tool::Pnt ( TopoDS::Vertex( vMap2( i ))));
- }
gp_Pnt gc[2]; // box center
double x0,y0,z0, x1,y1,z1;
// get 2 linked vertices of shape 1 not belonging to an inner wire of a face
std::list< TopoDS_Edge > allBndEdges1;
if ( !getOuterEdges( theShape1, *theMesh1, allBndEdges1 ))
- RETURN_BAD_RESULT("Edge not found");
-
+ {
+ if ( theShape1.ShapeType() != TopAbs_FACE )
+ RETURN_BAD_RESULT("Edge not found");
+ return assocFewEdgesFaces( TopoDS::Face( theShape1 ), theMesh1,
+ TopoDS::Face( theShape2 ), theMesh2, theMap );
+ }
std::list< TopoDS_Edge >::iterator edge1 = allBndEdges1.begin();
double minDist = std::numeric_limits<double>::max();
for ( int nbChecked=0; edge1 != allBndEdges1.end() && nbChecked++ < 10; ++edge1 )
}
//================================================================================
-/*!
- * \brief Find association of edges of faces
- * \param face1 - face 1
- * \param VV1 - vertices of face 1
- * \param face2 - face 2
- * \param VV2 - vertices of face 2 associated with ones of face 1
- * \param edges1 - out list of edges of face 1
- * \param edges2 - out list of edges of face 2
- * \retval int - nb of edges in an outer wire in a success case, else zero
+/*
+ * Find association of edges of faces
+ * \param face1 - face 1
+ * \param VV1 - vertices of face 1
+ * \param face2 - face 2
+ * \param VV2 - vertices of face 2 associated with ones of face 1
+ * \param edges1 - out list of edges of face 1
+ * \param edges2 - out list of edges of face 2
+ * \retval int - nb of edges in an outer wire in a success case, else zero
*/
//================================================================================
edges1.clear();
edges2.clear();
- if ( SMESH_Block::GetOrderedEdges( face1, VV1[0], edges1, nbEInW1, outer_wire_algo) !=
- SMESH_Block::GetOrderedEdges( face2, VV2[0], edges2, nbEInW2, outer_wire_algo) )
+ if ( SMESH_Block::GetOrderedEdges( face1, edges1, nbEInW1, VV1[0], outer_wire_algo) !=
+ SMESH_Block::GetOrderedEdges( face2, edges2, nbEInW2, VV2[0], outer_wire_algo) )
CONT_BAD_RESULT("Different number of wires in faces ");
if ( nbEInW1 != nbEInW2 && outer_wire_algo == 0 &&
CONT_BAD_RESULT("GetOrderedEdges() failed");
}
}
- edgeIt = --edges2.end();
if ( !VV2[1].IsSame( TopExp::LastVertex( edges2.front(), true ))) {
reverse = !reverse;
+ edgeIt = --edges2.end();
+ // move a degenerated edge from back to front
+ // http://www.salome-platform.org/forum/forum_11/173031193
+ if ( TopExp::FirstVertex( *edgeIt ).IsSame( TopExp::LastVertex( *edgeIt ))) {
+ edges2.splice( edges2.begin(), edges2, edgeIt );
+ edgeIt = --edges2.end();
+ }
// check if the second vertex belongs to the first or last edge in the wire
if ( !VV2[1].IsSame( TopExp::FirstVertex( *edgeIt, true ))) {
bool KO = true; // belongs to none
}
if ( reverse )
{
- Reverse( edges2 , nbEInW2.front());
+ reverseEdges( edges2 , nbEInW2.front());
if (( VV1[1].IsSame( TopExp::LastVertex( edges1.front(), true ))) !=
( VV2[1].IsSame( TopExp::LastVertex( edges2.front(), true ))))
CONT_BAD_RESULT("GetOrderedEdges() failed");
{
edges1.clear();
edges2.clear();
- SMESH_Block::GetOrderedEdges( face1, VV1[0], edges1, nbEInW1, i_ok_wire_algo);
- SMESH_Block::GetOrderedEdges( face2, VV2[0], edges2, nbEInW2, i_ok_wire_algo);
+ SMESH_Block::GetOrderedEdges( face1, edges1, nbEInW1, VV1[0], i_ok_wire_algo);
+ SMESH_Block::GetOrderedEdges( face2, edges2, nbEInW2, VV2[0], i_ok_wire_algo);
}
gp_XY dUV = v0f2UV.XY() - v0f1UV.XY(); // UV shift between 2 faces
//
// move edge2Beg to place before edge2End
edges2.splice( edge2End, edges2, edge2Beg++ );
- if ( sameVertexUV( *edge2Beg, face2, 0, v0f1UV, vTolUV ))
+ if ( edge2Beg != edges2.end() &&
+ sameVertexUV( *edge2Beg, face2, 0, v0f1UV, vTolUV ))
{
if ( iW1 == 0 ) OK = true; // OK is for the first wire
// reverse edges2 if needed
if ( !sameVertexUV( *edge2Beg, face2, 1, v1f1UV, vTolUV ))
- Reverse( edges2 , *nbE2, std::distance( edges2.begin(),edge2Beg ));
+ reverseEdges( edges2 , *nbE2, std::distance( edges2.begin(),edge2Beg ));
// put wire2 at a right place within edges2
if ( iW1 != iW2 ) {
list< TopoDS_Edge >::iterator place2 = edges2.begin();
l2[1] = SMESH_Algo::EdgeLength( *edgeIt++ );
if (( l1[0] < l1[1] ) != ( l2[0] < l2[1] ))
{
- Reverse( edges2, nbEdges );
+ reverseEdges( edges2, nbEdges );
}
}
}
}
//=======================================================================
-/*!
- * \brief Inserts association theShape1 <-> theShape2 to TShapeShapeMap
- * \param theShape1 - target shape
- * \param theShape2 - source shape
- * \param theAssociationMap - association map
- * \retval bool - true if there was no association for these shapes before
+/*
+ * Inserts association theShape1 <-> theShape2 to TShapeShapeMap
+ * \param theShape1 - target shape
+ * \param theShape2 - source shape
+ * \param theAssociationMap - association map
+ * \retval bool - true if there was no association for these shapes before
*/
//=======================================================================
}
//=======================================================================
-/*!
- * \brief Finds an edge by its vertices in a main shape of the mesh
- * \param aMesh - the mesh
- * \param V1 - vertex 1
- * \param V2 - vertex 2
- * \retval TopoDS_Edge - found edge
+/*
+ * Finds an edge by its vertices in a main shape of the mesh
+ * \param aMesh - the mesh
+ * \param V1 - vertex 1
+ * \param V2 - vertex 2
+ * \retval TopoDS_Edge - found edge
*/
//=======================================================================
}
//================================================================================
-/*!
- * \brief Return another face sharing an edge
- * \param edgeToFaces - data map of descendants to ancestors
- * \param edge - edge
- * \param face - face
- * \retval TopoDS_Face - found face
+/*
+ * Return another face sharing an edge
+ * \param edgeToFaces - data map of descendants to ancestors
+ * \param edge - edge
+ * \param face - face
+ * \retval TopoDS_Face - found face
*/
//================================================================================
}
//================================================================================
-/*!
- * \brief Return other vertex of an edge
+/*
+ * Return other vertex of an edge
*/
//================================================================================
}
//================================================================================
-/*!
- * \brief Return a propagation edge
- * \param aMesh - mesh
- * \param theEdge - edge to find by propagation
- * \param fromEdge - start edge for propagation
- * \retval pair<int,TopoDS_Edge> - propagation step and found edge
+/*
+ * Return a propagation edge
+ * \param aMesh - mesh
+ * \param anEdge - edge to find by propagation
+ * \param fromEdge - start edge for propagation
+ * \param chain - return, if !NULL, a propagation chain passed till
+ * anEdge; if anEdge.IsNull() then a full propagation chain is returned;
+ * fromEdge is the 1st in the chain
+ * \retval pair<int,TopoDS_Edge> - propagation step and found edge
*/
//================================================================================
pair<int,TopoDS_Edge>
-StdMeshers_ProjectionUtils::GetPropagationEdge( SMESH_Mesh* aMesh,
- const TopoDS_Edge& theEdge,
- const TopoDS_Edge& fromEdge)
+StdMeshers_ProjectionUtils::GetPropagationEdge( SMESH_Mesh* aMesh,
+ const TopoDS_Edge& anEdge,
+ const TopoDS_Edge& fromEdge,
+ TopTools_IndexedMapOfShape* chain)
{
- TopTools_IndexedMapOfShape aChain;
+ TopTools_IndexedMapOfShape locChain;
+ TopTools_IndexedMapOfShape& aChain = chain ? *chain : locChain;
int step = 0;
+ //TopTools_IndexedMapOfShape checkedWires;
+ BRepTools_WireExplorer aWE;
+ TopoDS_Shape fourEdges[4];
+
// List of edges, added to chain on the previous cycle pass
TopTools_ListOfShape listPrevEdges;
- listPrevEdges.Append(fromEdge);
+ listPrevEdges.Append( fromEdge );
+ aChain.Add( fromEdge );
// Collect all edges pass by pass
- while (listPrevEdges.Extent() > 0) {
+ while (listPrevEdges.Extent() > 0)
+ {
step++;
// List of edges, added to chain on this cycle pass
TopTools_ListOfShape listCurEdges;
// Find the next portion of edges
TopTools_ListIteratorOfListOfShape itE (listPrevEdges);
- for (; itE.More(); itE.Next()) {
- TopoDS_Shape anE = itE.Value();
+ for (; itE.More(); itE.Next())
+ {
+ const TopoDS_Shape& anE = itE.Value();
// Iterate on faces, having edge <anE>
TopTools_ListIteratorOfListOfShape itA (aMesh->GetAncestors(anE));
- for (; itA.More(); itA.Next()) {
- TopoDS_Shape aW = itA.Value();
+ for (; itA.More(); itA.Next())
+ {
+ const TopoDS_Shape& aW = itA.Value();
// There are objects of different type among the ancestors of edge
- if (aW.ShapeType() == TopAbs_WIRE) {
- TopoDS_Shape anOppE;
-
- BRepTools_WireExplorer aWE (TopoDS::Wire(aW));
- Standard_Integer nb = 1, found = 0;
- TopTools_Array1OfShape anEdges (1,4);
- for (; aWE.More(); aWE.Next(), nb++) {
- if (nb > 4) {
- found = 0;
+ if ( aW.ShapeType() == TopAbs_WIRE /*&& checkedWires.Add( aW )*/)
+ {
+ Standard_Integer nb = 0, found = -1;
+ for ( aWE.Init( TopoDS::Wire( aW )); aWE.More(); aWE.Next() ) {
+ if (nb+1 > 4) {
+ found = -1;
break;
}
- anEdges(nb) = aWE.Current();
- if (anEdges(nb).IsSame(anE)) found = nb;
+ fourEdges[ nb ] = aWE.Current();
+ if ( aWE.Current().IsSame( anE )) found = nb;
+ nb++;
}
-
- if (nb == 5 && found > 0) {
+ if (nb == 4 && found >= 0) {
// Quadrangle face found, get an opposite edge
- Standard_Integer opp = found + 2;
- if (opp > 4) opp -= 4;
- anOppE = anEdges(opp);
+ TopoDS_Shape& anOppE = fourEdges[( found + 2 ) % 4 ];
// add anOppE to aChain if ...
- if (!aChain.Contains(anOppE)) { // ... anOppE is not in aChain
+ int prevChainSize = aChain.Extent();
+ if ( aChain.Add(anOppE) > prevChainSize ) { // ... anOppE is not in aChain
// Add found edge to the chain oriented so that to
// have it co-directed with a forward MainEdge
TopAbs_Orientation ori = anE.Orientation();
- if ( anEdges(opp).Orientation() == anEdges(found).Orientation() )
+ if ( anOppE.Orientation() == fourEdges[found].Orientation() )
ori = TopAbs::Reverse( ori );
anOppE.Orientation( ori );
- if ( anOppE.IsSame( theEdge ))
+ if ( anOppE.IsSame( anEdge ))
return make_pair( step, TopoDS::Edge( anOppE ));
- aChain.Add(anOppE);
listCurEdges.Append(anOppE);
}
- } // if (nb == 5 && found > 0)
+ } // if (nb == 4 && found >= 0)
} // if (aF.ShapeType() == TopAbs_WIRE)
- } // for (; itF.More(); itF.Next())
- } // for (; itE.More(); itE.Next())
+ } // loop on ancestors of anE
+ } // loop on listPrevEdges
listPrevEdges = listCurEdges;
} // while (listPrevEdges.Extent() > 0)
}
//================================================================================
- /*!
- * \brief Find corresponding nodes on two faces
- * \param face1 - the first face
- * \param mesh1 - mesh containing elements on the first face
- * \param face2 - the second face
- * \param mesh2 - mesh containing elements on the second face
- * \param assocMap - map associating sub-shapes of the faces
- * \param node1To2Map - map containing found matching nodes
- * \retval bool - is a success
- */
+/*
+ * Find corresponding nodes on two faces
+ * \param face1 - the first face
+ * \param mesh1 - mesh containing elements on the first face
+ * \param face2 - the second face
+ * \param mesh2 - mesh containing elements on the second face
+ * \param assocMap - map associating sub-shapes of the faces
+ * \param node1To2Map - map containing found matching nodes
+ * \retval bool - is a success
+ */
//================================================================================
bool StdMeshers_ProjectionUtils::
{
SMESHDS_Mesh* meshDS1 = mesh1->GetMeshDS();
SMESHDS_Mesh* meshDS2 = mesh2->GetMeshDS();
-
+
SMESH_MesherHelper helper1( *mesh1 );
SMESH_MesherHelper helper2( *mesh2 );
eE.Next();
// edge 1
if ( !assocMap.IsBound( e2, /*is2nd=*/true ))
- RETURN_BAD_RESULT("Association not found for edge " << meshDS2->ShapeToIndex( e2 ));
+ continue;
+ //RETURN_BAD_RESULT("Association not found for edge " << meshDS2->ShapeToIndex( e2 ));
TopoDS_Edge e1 = TopoDS::Edge( assocMap( e2, /*is2nd=*/true ));
if ( !helper1.IsSubShape( e1, face1 ))
RETURN_BAD_RESULT("Wrong association, edge " << meshDS1->ShapeToIndex( e1 ) <<
// get 2 matching vertices
TopoDS_Vertex V2 = TopExp::FirstVertex( TopoDS::Edge( edge2 ));
if ( !assocMap.IsBound( V2, /*is2nd=*/true ))
- RETURN_BAD_RESULT("Association not found for vertex " << meshDS2->ShapeToIndex( V2 ));
+ {
+ V2 = TopExp::LastVertex( TopoDS::Edge( edge2 ));
+ if ( !assocMap.IsBound( V2, /*is2nd=*/true ))
+ RETURN_BAD_RESULT("Association not found for vertex " << meshDS2->ShapeToIndex( V2 ));
+ }
TopoDS_Vertex V1 = TopoDS::Vertex( assocMap( V2, /*is2nd=*/true ));
// nodes on vertices
TIDSortedElemSet inSet, notInSet;
const SMDS_MeshElement* f1 =
- SMESH_MeshEditor::FindFaceInSet( vNode, eNode, inSet, notInSet );
+ SMESH_MeshAlgos::FindFaceInSet( vNode, eNode, inSet, notInSet );
if ( !f1 ) RETURN_BAD_RESULT("The first face on seam not found");
notInSet.insert( f1 );
const SMDS_MeshElement* f2 =
- SMESH_MeshEditor::FindFaceInSet( vNode, eNode, inSet, notInSet );
+ SMESH_MeshAlgos::FindFaceInSet( vNode, eNode, inSet, notInSet );
if ( !f2 ) RETURN_BAD_RESULT("The second face on seam not found");
// select a face with less UV of vNode
for ( int i = 0; i < nbNodes; ++i ) {
const SMDS_MeshNode* n1 = faceToKeep->GetNode( i );
const SMDS_MeshNode* n2 = faceToKeep->GetNode(( i+1 ) % nbNodes );
- f1 = SMESH_MeshEditor::FindFaceInSet( n1, n2, inSet, notInSet );
+ f1 = SMESH_MeshAlgos::FindFaceInSet( n1, n2, inSet, notInSet );
if ( f1 )
elems.insert( f1 );
}
node1To2Map.insert( make_pair( vNode1, vNode2 ));
}
-// don't know why this condition is usually true :(
-// if ( node1To2Map.size() * quadFactor < SM1->NbNodes() )
-// MESSAGE("FindMatchingNodes() found too few node pairs starting from nodes ("
-// << vNode1->GetID() << " - " << eNode1[0]->GetID() << ") ("
-// << vNode2->GetID() << " - " << eNode2[0]->GetID() << "):"
-// << node1To2Map.size() * quadFactor << " < " << SM1->NbNodes());
-
+ // don't know why this condition is usually true :(
+ // if ( node1To2Map.size() * quadFactor < SM1->NbNodes() )
+ // MESSAGE("FindMatchingNodes() found too few node pairs starting from nodes ("
+ // << vNode1->GetID() << " - " << eNode1[0]->GetID() << ") ("
+ // << vNode2->GetID() << " - " << eNode2[0]->GetID() << "):"
+ // << node1To2Map.size() * quadFactor << " < " << SM1->NbNodes());
+
return true;
}
//================================================================================
- /*!
- * \brief Return any sub-shape of a face belonging to the outer wire
- * \param face - the face
- * \param type - type of sub-shape to return
- * \retval TopoDS_Shape - the found sub-shape
- */
+/*
+ * Return any sub-shape of a face belonging to the outer wire
+ * \param face - the face
+ * \param type - type of sub-shape to return
+ * \retval TopoDS_Shape - the found sub-shape
+ */
//================================================================================
TopoDS_Shape StdMeshers_ProjectionUtils::OuterShape( const TopoDS_Face& face,
}
//================================================================================
- /*!
- * \brief Check that submesh is computed and try to compute it if is not
- * \param sm - submesh to compute
- * \param iterationNb - int used to stop infinite recursive call
- * \retval bool - true if computed
- */
+/*
+ * Check that sub-mesh is computed and try to compute it if is not
+ * \param sm - sub-mesh to compute
+ * \param iterationNb - int used to stop infinite recursive call
+ * \retval bool - true if computed
+ */
//================================================================================
bool StdMeshers_ProjectionUtils::MakeComputed(SMESH_subMesh * sm, const int iterationNb)
if ( sm->IsMeshComputed() )
return true;
- SMESH_Mesh* mesh = sm->GetFather();
- SMESH_Gen* gen = mesh->GetGen();
- SMESH_Algo* algo = sm->GetAlgo();
+ SMESH_Mesh* mesh = sm->GetFather();
+ SMESH_Gen* gen = mesh->GetGen();
+ SMESH_Algo* algo = sm->GetAlgo();
+ TopoDS_Shape shape = sm->GetSubShape();
if ( !algo )
{
- if ( sm->GetSubShape().ShapeType() != TopAbs_COMPOUND )
- RETURN_BAD_RESULT("No algo assigned to submesh " << sm->GetId());
- // group
- bool computed = true;
- for ( TopoDS_Iterator grMember( sm->GetSubShape() ); grMember.More(); grMember.Next())
- if ( SMESH_subMesh* grSub = mesh->GetSubMesh( grMember.Value() ))
- if ( !MakeComputed( grSub, iterationNb + 1 ))
- computed = false;
- return computed;
+ if ( shape.ShapeType() != TopAbs_COMPOUND )
+ {
+ // No algo assigned to a non-compound sub-mesh.
+ // Try to find an all-dimensional algo of an upper dimension
+ int dim = gen->GetShapeDim( shape );
+ for ( ++dim; ( dim <= 3 && !algo ); ++dim )
+ {
+ SMESH_HypoFilter hypoFilter( SMESH_HypoFilter::IsAlgo() );
+ hypoFilter.And( SMESH_HypoFilter::HasDim( dim ));
+ list <const SMESHDS_Hypothesis * > hyps;
+ list< TopoDS_Shape > assignedTo;
+ int nbAlgos =
+ mesh->GetHypotheses( shape, hypoFilter, hyps, true, &assignedTo );
+ if ( nbAlgos > 1 ) // concurrent algos
+ {
+ list<SMESH_subMesh*> smList; // where an algo is assigned
+ list< TopoDS_Shape >::iterator shapeIt = assignedTo.begin();
+ for ( ; shapeIt != assignedTo.end(); ++shapeIt )
+ smList.push_back( mesh->GetSubMesh( *shapeIt ));
+
+ mesh->SortByMeshOrder( smList );
+ algo = smList.front()->GetAlgo();
+ shape = smList.front()->GetSubShape();
+ }
+ else if ( nbAlgos == 1 )
+ {
+ algo = (SMESH_Algo*) hyps.front();
+ shape = assignedTo.front();
+ }
+ }
+ if ( !algo )
+ return false;
+ }
+ else
+ {
+ // group
+ bool computed = true;
+ for ( TopoDS_Iterator grMember( shape ); grMember.More(); grMember.Next())
+ if ( SMESH_subMesh* grSub = mesh->GetSubMesh( grMember.Value() ))
+ if ( !MakeComputed( grSub, iterationNb + 1 ))
+ computed = false;
+ return computed;
+ }
}
string algoType = algo->GetName();
if ( algoType.substr(0, 11) != "Projection_")
- return gen->Compute( *mesh, sm->GetSubShape() );
+ return gen->Compute( *mesh, shape, /*shapeOnly=*/true );
// try to compute source mesh
const list <const SMESHDS_Hypothesis *> & hyps =
- algo->GetUsedHypothesis( *mesh, sm->GetSubShape() );
+ algo->GetUsedHypothesis( *mesh, shape );
TopoDS_Shape srcShape;
SMESH_Mesh* srcMesh = 0;
}
}
if ( srcShape.IsNull() ) // no projection source defined
- return gen->Compute( *mesh, sm->GetSubShape() );
+ return gen->Compute( *mesh, shape, /*shapeOnly=*/true );
- if ( srcShape.IsSame( sm->GetSubShape() ))
+ if ( srcShape.IsSame( shape ))
RETURN_BAD_RESULT("Projection from self");
if ( !srcMesh )
srcMesh = mesh;
if ( MakeComputed( srcMesh->GetSubMesh( srcShape ), iterationNb + 1 ) &&
- gen->Compute( *mesh, sm->GetSubShape() ))
+ gen->Compute( *mesh, shape, /*shapeOnly=*/true ))
return sm->IsMeshComputed();
return false;
}
+
//================================================================================
-/*!
- * \brief Count nb of sub-shapes
- * \param shape - the shape
- * \param type - the type of sub-shapes to count
- * \retval int - the calculated number
+/*
+ * Returns an error message to show in case if MakeComputed( sm ) fails.
*/
//================================================================================
-int StdMeshers_ProjectionUtils::Count(const TopoDS_Shape& shape,
- const TopAbs_ShapeEnum type,
- const bool ignoreSame)
+std::string StdMeshers_ProjectionUtils::SourceNotComputedError( SMESH_subMesh * sm,
+ SMESH_Algo* projAlgo )
{
- if ( ignoreSame ) {
- TopTools_IndexedMapOfShape map;
- TopExp::MapShapes( shape, type, map );
- return map.Extent();
- }
- else {
- int nb = 0;
- for ( TopExp_Explorer exp( shape, type ); exp.More(); exp.Next() )
- ++nb;
- return nb;
+ const char usualMessage [] = "Source mesh not computed";
+ if ( !projAlgo )
+ return usualMessage;
+ if ( !sm || sm->GetAlgoState() != SMESH_subMesh::NO_ALGO )
+ return usualMessage; // algo is OK, anything else is KO.
+
+ // Try to find a type of all-dimentional algorithm that would compute the
+ // given sub-mesh if it could be launched before projection
+ const TopoDS_Shape shape = sm->GetSubShape();
+ const int shapeDim = SMESH_Gen::GetShapeDim( shape );
+
+ for ( int dimIncrement = 1; shapeDim + dimIncrement < 4; ++dimIncrement )
+ {
+ SMESH_HypoFilter filter( SMESH_HypoFilter::IsAlgo() );
+ filter.And( filter.HasDim( shapeDim + dimIncrement ));
+
+ SMESH_Algo* algo = (SMESH_Algo*) sm->GetFather()->GetHypothesis( shape, filter, true );
+ if ( algo && !algo->NeedDiscreteBoundary() )
+ return SMESH_Comment("\"")
+ << algo->GetFeatures()._label << "\""
+ << " can't be used to compute the source mesh for \""
+ << projAlgo->GetFeatures()._label << "\" in this case";
}
+ return usualMessage;
}
//================================================================================
-/*!
- * \brief Return a boundary EDGE of edgeContainer
+/*
+ * Return a boundary EDGE (or all boundary EDGEs) of edgeContainer
*/
//================================================================================
-TopoDS_Edge StdMeshers_ProjectionUtils::GetBoundaryEdge(const TopoDS_Shape& edgeContainer,
- const SMESH_Mesh& mesh,
- std::list< TopoDS_Edge >* allBndEdges)
+TopoDS_Edge
+StdMeshers_ProjectionUtils::GetBoundaryEdge(const TopoDS_Shape& edgeContainer,
+ const SMESH_Mesh& mesh,
+ std::list< TopoDS_Edge >* allBndEdges)
{
TopTools_IndexedMapOfShape facesOfEdgeContainer, facesNearEdge;
TopExp::MapShapes( edgeContainer, TopAbs_FACE, facesOfEdgeContainer );
namespace { // Definition of event listeners
- SMESH_subMeshEventListener* GetSrcSubMeshListener();
+ SMESH_subMeshEventListener* getSrcSubMeshListener();
//================================================================================
/*!
eventType == SMESH_subMesh::ALGO_EVENT)
{
// delete current source listener
- subMesh->DeleteEventListener( GetSrcSubMeshListener() );
+ subMesh->DeleteEventListener( getSrcSubMeshListener() );
// let algo set a new one
if ( SMESH_Algo* algo = subMesh->GetAlgo() )
algo->SetEventListener( subMesh );
*/
//================================================================================
- SMESH_subMeshEventListener* GetHypModifWaiter() {
+ SMESH_subMeshEventListener* getHypModifWaiter() {
static HypModifWaiter aHypModifWaiter;
return &aHypModifWaiter;
}
*/
//================================================================================
- SMESH_subMeshEventListener* GetSrcSubMeshListener() {
+ SMESH_subMeshEventListener* getSrcSubMeshListener() {
static SMESH_subMeshEventListener srcListener(false, // won't be deleted by submesh
"StdMeshers_ProjectionUtils::SrcSubMeshListener");
return &srcListener;
}
//================================================================================
-/*!
- * \brief Set event listeners to submesh with projection algo
- * \param subMesh - submesh with projection algo
- * \param srcShape - source shape
- * \param srcMesh - source mesh
+/*
+ * Set event listeners to submesh with projection algo
+ * \param subMesh - submesh with projection algo
+ * \param srcShape - source shape
+ * \param srcMesh - source mesh
*/
//================================================================================
TopoDS_Shape srcShape,
SMESH_Mesh* srcMesh)
{
- // Set listener that resets an event listener on source submesh when
+ // Set the listener that resets an event listener on source submesh when
// "ProjectionSource*D" hypothesis is modified since source shape can be changed
- subMesh->SetEventListener( GetHypModifWaiter(),0,subMesh);
+ subMesh->SetEventListener( getHypModifWaiter(),0,subMesh);
// Set an event listener to submesh of the source shape
if ( !srcShape.IsNull() )
if ( srcSM != subMesh )
{
SMESH_subMeshEventListenerData* data =
- srcSM->GetEventListenerData(GetSrcSubMeshListener());
+ srcSM->GetEventListenerData(getSrcSubMeshListener());
if ( data )
data->mySubMeshes.push_back( subMesh );
else
data = SMESH_subMeshEventListenerData::MakeData( subMesh );
- subMesh->SetEventListener ( GetSrcSubMeshListener(), data, srcSM );
+ subMesh->SetEventListener ( getSrcSubMeshListener(), data, srcSM );
}
}
}
else
{
- subMesh->SetEventListener( GetSrcSubMeshListener(),
+ subMesh->SetEventListener( getSrcSubMeshListener(),
SMESH_subMeshEventListenerData::MakeData( subMesh ),
srcShapeSM );
}
