-// Copyright (C) 2007-2015 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
{
return _src2tgtNodes;
}
+ void SetEventListener( SMESH_subMesh* tgtSubMesh )
+ {
+ NSProjUtils::SetEventListener( tgtSubMesh,
+ _sourceHypo->GetSourceFace(),
+ _sourceHypo->GetSourceMesh() );
+ }
};
//=======================================================================
/*!
//================================================================================
StdMeshers_Prism_3D::~StdMeshers_Prism_3D()
-{}
+{
+ pointsToPython( std::vector<gp_XYZ>() ); // avoid warning: pointsToPython defined but not used
+}
//=======================================================================
//function : CheckHypothesis
std::list< int >::iterator nbE = thePrism.myNbEdgesInWires.begin();
std::list< int > nbQuadsPerWire;
int iE = 0;
- double f,l;
while ( edge != thePrism.myBottomEdges.end() )
{
++iE;
- if ( BRep_Tool::Curve( *edge, f,l ).IsNull() )
+ if ( SMESH_Algo::isDegenerated( *edge ))
{
edge = thePrism.myBottomEdges.erase( edge );
--iE;
}
else
{
+ bool hasWallFace = false;
TopTools_ListIteratorOfListOfShape faceIt( edgeToFaces.FindFromKey( *edge ));
for ( ; faceIt.More(); faceIt.Next() )
{
const TopoDS_Face& face = TopoDS::Face( faceIt.Value() );
if ( !thePrism.myBottom.IsSame( face ))
{
+ hasWallFace = true;
Prism_3D::TQuadList quadList( 1, quadAlgo->CheckNbEdges( *mesh, face ));
if ( !quadList.back() )
return toSM( error(TCom("Side face #") << shapeID( face )
break;
}
}
- ++edge;
+ if ( hasWallFace )
+ {
+ ++edge;
+ }
+ else // seam edge (IPAL53561)
+ {
+ edge = thePrism.myBottomEdges.erase( edge );
+ --iE;
+ --(*nbE);
+ }
}
if ( iE == *nbE )
{
( ! botSM->GetAlgo() ||
! _gen->Compute( *botSM->GetFather(), botSM->GetSubShape(), /*shapeOnly=*/true )))
return error( COMPERR_BAD_INPUT_MESH,
- TCom( "No mesher defined to compute the face #")
+ TCom( "No mesher defined to compute the base face #")
<< shapeID( thePrism.myBottom ));
// Make all side FACEs of thePrism meshed with quads
for ( ; bot_column != myBotToColumnMap.end(); ++bot_column )
{
const Prism_3D::TNode& tBotNode = bot_column->first; // bottom TNode
- if ( tBotNode.GetPositionType() != SMDS_TOP_FACE )
+ if ( tBotNode.GetPositionType() != SMDS_TOP_FACE &&
+ myBlock.HasNodeColumn( tBotNode.myNode ))
continue; // node is not inside the FACE
// column nodes; middle part of the column are zero pointers
for ( int i = 0; i < nbNodes; ++i )
{
const SMDS_MeshNode* n = face->GetNode( i );
- if ( n->GetPosition()->GetTypeOfPosition() == SMDS_TOP_FACE ) {
+ columns[ i ] = NULL;
+
+ if ( n->GetPosition()->GetTypeOfPosition() != SMDS_TOP_FACE )
+ columns[ i ] = myBlock.GetNodeColumn( n );
+
+ if ( !columns[ i ] )
+ {
TNode2ColumnMap::iterator bot_column = myBotToColumnMap.find( n );
if ( bot_column == myBotToColumnMap.end() )
- return toSM( error(TCom("No nodes found above node ") << n->GetID() ));
- columns[ i ] = & bot_column->second;
- }
- else {
- columns[ i ] = myBlock.GetNodeColumn( n );
- if ( !columns[ i ] )
return toSM( error(TCom("No side nodes found above node ") << n->GetID() ));
+ columns[ i ] = & bot_column->second;
}
}
// create prisms
// update state of sub-meshes (mostly in order to erase improper errors)
SMESH_subMesh* sm = myHelper->GetMesh()->GetSubMesh( thePrism.myShape3D );
- SMESH_subMeshIteratorPtr smIt = sm->getDependsOnIterator(/*includeSelf=*/false);
+ SMESH_subMeshIteratorPtr smIt = sm->getDependsOnIterator(/*includeSelf=*/true);
while ( smIt->more() )
{
sm = smIt->next();
{
const SMDS_MeshNode* botNode = bN_tN->first;
const SMDS_MeshNode* topNode = bN_tN->second;
- if ( botNode->GetPosition()->GetTypeOfPosition() != SMDS_TOP_FACE )
+ if ( botNode->GetPosition()->GetTypeOfPosition() != SMDS_TOP_FACE &&
+ myBlock.HasNodeColumn( botNode ))
continue; // wall columns are contained in myBlock
// create node column
Prism_3D::TNode bN( botNode );
Handle(Geom_Surface) surface = BRep_Tool::Surface( topFace, loc );
bool isPlanar = GeomLib_IsPlanarSurface( surface ).IsPlanar();
- bool isFixed = false;
set<const SMDS_MeshNode*> fixedNodes;
- for ( int iAttemp = 0; !isFixed && iAttemp < 10; ++iAttemp )
- {
- TIDSortedElemSet faces;
- for ( faceIt = topSMDS->GetElements(); faceIt->more(); )
- faces.insert( faces.end(), faceIt->next() );
+ TIDSortedElemSet faces;
+ for ( faceIt = topSMDS->GetElements(); faceIt->more(); )
+ faces.insert( faces.end(), faceIt->next() );
+ bool isOk = false;
+ for ( int isCentroidal = 0; isCentroidal < 2; ++isCentroidal )
+ {
SMESH_MeshEditor::SmoothMethod algo =
- iAttemp ? SMESH_MeshEditor::CENTROIDAL : SMESH_MeshEditor::LAPLACIAN;
+ isCentroidal ? SMESH_MeshEditor::CENTROIDAL : SMESH_MeshEditor::LAPLACIAN;
- // smoothing
- editor.Smooth( faces, fixedNodes, algo, /*nbIterations=*/ 10,
- /*theTgtAspectRatio=*/1.0, /*the2D=*/!isPlanar);
+ int nbAttempts = isCentroidal ? 1 : 10;
+ for ( int iAttemp = 0; iAttemp < nbAttempts; ++iAttemp )
+ {
+ TIDSortedElemSet workFaces = faces;
+
+ // smoothing
+ editor.Smooth( workFaces, fixedNodes, algo, /*nbIterations=*/ 10,
+ /*theTgtAspectRatio=*/1.0, /*the2D=*/!isPlanar);
- isFixed = !topHelper.IsDistorted2D( topSM, /*checkUV=*/true );
+ if (( isOk = !topHelper.IsDistorted2D( topSM, /*checkUV=*/true )) &&
+ ( !isCentroidal ))
+ break;
+ }
}
- if ( !isFixed )
+ if ( !isOk )
return toSM( error( TCom("Projection from face #") << botSM->GetId()
<< " to face #" << topSM->GetId()
<< " failed: inverted elements created"));
}
+ TProjction2dAlgo::instance( this )->SetEventListener( topSM );
+
return true;
}
bool StdMeshers_Prism_3D::isSimpleBottom( const Prism_3D::TPrismTopo& thePrism )
{
+ if ( thePrism.myBottomEdges.size() != 4 )
+ return false;
+
// analyse angles between edges
double nbConcaveAng = 0, nbConvexAng = 0;
TopoDS_Face reverseBottom = TopoDS::Face( thePrism.myBottom.Reversed() ); // see initPrism()
tgtSM->ComputeStateEngine ( SMESH_subMesh::CHECK_COMPUTE_STATE );
tgtSM->ComputeSubMeshStateEngine( SMESH_subMesh::CHECK_COMPUTE_STATE );
+ projector2D->SetEventListener( tgtSM );
+
return ok;
}
struct EdgeWithNeighbors
{
TopoDS_Edge _edge;
- int _iL, _iR;
- EdgeWithNeighbors(const TopoDS_Edge& E, int iE, int nbE, int shift = 0 ):
- _edge( E ),
+ int _iBase; /* index in a WIRE with non-base EDGEs excluded */
+ int _iL, _iR; /* used to connect edges in a base FACE */
+ bool _isBase; /* is used in a base FACE */
+ EdgeWithNeighbors(const TopoDS_Edge& E, int iE, int nbE, int shift, bool isBase ):
+ _edge( E ), _iBase( iE + shift ),
_iL( SMESH_MesherHelper::WrapIndex( iE-1, nbE ) + shift ),
- _iR( SMESH_MesherHelper::WrapIndex( iE+1, nbE ) + shift )
+ _iR( SMESH_MesherHelper::WrapIndex( iE+1, nbE ) + shift ),
+ _isBase( isBase )
{
}
EdgeWithNeighbors() {}
+ bool IsInternal() const { return !_edge.IsNull() && _edge.Orientation() == TopAbs_INTERNAL; }
};
// PrismSide contains all FACEs linking a bottom EDGE with a top one.
struct PrismSide
int _nbCheckedEdges; // nb of EDGEs whose location is defined
PrismSide *_leftSide; // neighbor sides
PrismSide *_rightSide;
+ bool _isInternal; // whether this side raises from an INTERNAL EDGE
void SetExcluded() { _leftSide = _rightSide = NULL; }
bool IsExcluded() const { return !_leftSide; }
const TopoDS_Edge& Edge( int i ) const
if ( E.IsSame( Edge( i ))) return i;
return -1;
}
- bool IsSideFace( const TopoDS_Shape& face ) const
+ bool IsSideFace( const TopoDS_Shape& face, const bool checkNeighbors ) const
{
if ( _faces->Contains( face )) // avoid returning true for a prism top FACE
return ( !_face.IsNull() || !( face.IsSame( _faces->FindKey( _faces->Extent() ))));
+
+ if ( checkNeighbors )
+ return (( _leftSide && _leftSide->IsSideFace ( face, false )) ||
+ ( _rightSide && _rightSide->IsSideFace( face, false )));
+
return false;
}
};
+ //--------------------------------------------------------------------------------
+ /*!
+ * \brief Return another faces sharing an edge
+ */
+ const TopoDS_Face & getAnotherFace( const TopoDS_Face& face,
+ const TopoDS_Edge& edge,
+ TopTools_IndexedDataMapOfShapeListOfShape& facesOfEdge)
+ {
+ TopTools_ListIteratorOfListOfShape faceIt( facesOfEdge.FindFromKey( edge ));
+ for ( ; faceIt.More(); faceIt.Next() )
+ if ( !face.IsSame( faceIt.Value() ))
+ return TopoDS::Face( faceIt.Value() );
+ return face;
+ }
+
//--------------------------------------------------------------------------------
/*!
* \brief Return ordered edges of a face
*/
- bool getEdges( const TopoDS_Face& face,
- vector< EdgeWithNeighbors > & edges,
- const bool noHolesAllowed)
+ bool getEdges( const TopoDS_Face& face,
+ vector< EdgeWithNeighbors > & edges,
+ TopTools_IndexedDataMapOfShapeListOfShape& facesOfEdge,
+ const bool noHolesAllowed)
{
+ TopoDS_Face f = face;
+ if ( f.Orientation() != TopAbs_FORWARD &&
+ f.Orientation() != TopAbs_REVERSED )
+ f.Orientation( TopAbs_FORWARD );
list< TopoDS_Edge > ee;
list< int > nbEdgesInWires;
- int nbW = SMESH_Block::GetOrderedEdges( face, ee, nbEdgesInWires );
+ int nbW = SMESH_Block::GetOrderedEdges( f, ee, nbEdgesInWires );
if ( nbW > 1 && noHolesAllowed )
return false;
- int iE, nbTot = 0;
- list< TopoDS_Edge >::iterator e = ee.begin();
- list< int >::iterator nbE = nbEdgesInWires.begin();
+ int iE, nbTot = 0, nbBase, iBase;
+ list< TopoDS_Edge >::iterator e = ee.begin();
+ list< int >::iterator nbE = nbEdgesInWires.begin();
for ( ; nbE != nbEdgesInWires.end(); ++nbE )
for ( iE = 0; iE < *nbE; ++e, ++iE )
- if ( SMESH_Algo::isDegenerated( *e ))
+ if ( SMESH_Algo::isDegenerated( *e )) // degenerated EDGE is never used
{
e = --ee.erase( e );
--(*nbE);
--iE;
}
- else
- {
- e->Orientation( TopAbs_FORWARD ); // for operator==() to work
- }
+ vector<int> isBase;
edges.clear();
e = ee.begin();
for ( nbE = nbEdgesInWires.begin(); nbE != nbEdgesInWires.end(); ++nbE )
{
- for ( iE = 0; iE < *nbE; ++e, ++iE )
- edges.push_back( EdgeWithNeighbors( *e, iE, *nbE, nbTot ));
- nbTot += *nbE;
+ nbBase = 0;
+ isBase.resize( *nbE );
+ list< TopoDS_Edge >::iterator eIt = e;
+ for ( iE = 0; iE < *nbE; ++eIt, ++iE )
+ {
+ isBase[ iE ] = ( getAnotherFace( face, *eIt, facesOfEdge ) != face );
+ nbBase += isBase[ iE ];
+ }
+ for ( iBase = 0, iE = 0; iE < *nbE; ++e, ++iE )
+ {
+ edges.push_back( EdgeWithNeighbors( *e, iBase, nbBase, nbTot, isBase[ iE ] ));
+ iBase += isBase[ iE ];
+ }
+ nbTot += nbBase;
+ }
+ if ( nbTot == 0 )
+ return false;
+
+ // IPAL53099. Set correct neighbors to INTERNAL EDGEs, which can be connected to
+ // EDGEs of the outer WIRE but this fact can't be detected by their order.
+ if ( nbW > 1 )
+ {
+ int iFirst = 0, iLast;
+ for ( nbE = nbEdgesInWires.begin(); nbE != nbEdgesInWires.end(); ++nbE )
+ {
+ iLast = iFirst + *nbE - 1;
+ TopoDS_Vertex vv[2] = { SMESH_MesherHelper::IthVertex( 0, edges[ iFirst ]._edge ),
+ SMESH_MesherHelper::IthVertex( 1, edges[ iLast ]._edge ) };
+ bool isConnectOk = ( vv[0].IsSame( vv[1] ));
+ if ( !isConnectOk )
+ {
+ edges[ iFirst ]._iL = edges[ iFirst ]._iBase; // connect to self
+ edges[ iLast ]._iR = edges[ iLast ]._iBase;
+
+ // look for an EDGE of the outer WIRE connected to vv
+ TopoDS_Vertex v0, v1;
+ for ( iE = 0; iE < nbEdgesInWires.front(); ++iE )
+ {
+ v0 = SMESH_MesherHelper::IthVertex( 0, edges[ iE ]._edge );
+ v1 = SMESH_MesherHelper::IthVertex( 1, edges[ iE ]._edge );
+ if ( vv[0].IsSame( v0 ) || vv[0].IsSame( v1 ))
+ edges[ iFirst ]._iL = edges[ iE ]._iBase;
+ if ( vv[1].IsSame( v0 ) || vv[1].IsSame( v1 ))
+ edges[ iLast ]._iR = edges[ iE ]._iBase;
+ }
+ }
+ iFirst += *nbE;
+ }
}
return edges.size();
}
- //--------------------------------------------------------------------------------
- /*!
- * \brief Return another faces sharing an edge
- */
- const TopoDS_Face & getAnotherFace( const TopoDS_Face& face,
- const TopoDS_Edge& edge,
- TopTools_IndexedDataMapOfShapeListOfShape& facesOfEdge)
- {
- TopTools_ListIteratorOfListOfShape faceIt( facesOfEdge.FindFromKey( edge ));
- for ( ; faceIt.More(); faceIt.Next() )
- if ( !face.IsSame( faceIt.Value() ))
- return TopoDS::Face( faceIt.Value() );
- return face;
- }
-
+
//--------------------------------------------------------------------------------
/*!
* \brief Return number of faces sharing given edges
*/
- int nbAdjacentFaces( const std::vector< EdgeWithNeighbors >& edges,
- const TopTools_IndexedDataMapOfShapeListOfShape& facesOfEdge )
- {
- TopTools_MapOfShape adjFaces;
-
- for ( size_t i = 0; i < edges.size(); ++i )
- {
- TopTools_ListIteratorOfListOfShape faceIt( facesOfEdge.FindFromKey( edges[i]._edge ));
- for ( ; faceIt.More(); faceIt.Next() )
- adjFaces.Add( faceIt.Value() );
- }
- return adjFaces.Extent();
- }
+ // int nbAdjacentFaces( const std::vector< EdgeWithNeighbors >& edges,
+ // const TopTools_IndexedDataMapOfShapeListOfShape& facesOfEdge )
+ // {
+ // TopTools_MapOfShape adjFaces;
+
+ // for ( size_t i = 0; i < edges.size(); ++i )
+ // {
+ // TopTools_ListIteratorOfListOfShape faceIt( facesOfEdge.FindFromKey( edges[i]._edge ));
+ // for ( ; faceIt.More(); faceIt.Next() )
+ // adjFaces.Add( faceIt.Value() );
+ // }
+ // return adjFaces.Extent();
+ // }
}
//================================================================================
// check nb shells
TopoDS_Shape shell;
TopExp_Explorer shExp( sExp.Current(), TopAbs_SHELL );
- if ( shExp.More() ) {
+ while ( shExp.More() ) {
shell = shExp.Current();
shExp.Next();
- if ( shExp.More() )
+ if ( shExp.More() && BRep_Tool::IsClosed( shExp.Current() ))
shell.Nullify();
}
if ( shell.IsNull() ) {
}
// get all faces
TopTools_IndexedMapOfShape allFaces;
- TopExp::MapShapes( shell, TopAbs_FACE, allFaces );
+ TopExp::MapShapes( sExp.Current(), TopAbs_FACE, allFaces );
if ( allFaces.Extent() < 3 ) {
if ( toCheckAll ) return false;
continue;
}
}
#ifdef _DEBUG_
- TopTools_IndexedMapOfShape allShapes;
+ TopTools_IndexedMapOfShape allShapes; // usage: allShapes.FindIndex( s )
TopExp::MapShapes( shape, allShapes );
#endif
TEdgeWithNeighborsVec& botEdges = faceEdgesVec[ iF ];
if ( botEdges.empty() )
- if ( !getEdges( botF, botEdges, /*noHoles=*/false ))
+ if ( !getEdges( botF, botEdges, facesOfEdge, /*noHoles=*/false ))
break;
- if ( allFaces.Extent()-1 <= (int) botEdges.size() )
+
+ int nbBase = 0;
+ for ( size_t iS = 0; iS < botEdges.size(); ++iS )
+ nbBase += botEdges[ iS ]._isBase;
+
+ if ( allFaces.Extent()-1 <= nbBase )
continue; // all faces are adjacent to botF - no top FACE
// init data of side FACEs
sides.clear();
- sides.resize( botEdges.size() );
- for ( size_t iS = 0; iS < botEdges.size(); ++iS )
+ sides.resize( nbBase );
+ size_t iS = 0;
+ for ( size_t iE = 0; iE < botEdges.size(); ++iE )
{
- sides[ iS ]._topEdge = botEdges[ iS ]._edge;
- sides[ iS ]._face = botF;
- sides[ iS ]._leftSide = & sides[ botEdges[ iS ]._iR ];
- sides[ iS ]._rightSide = & sides[ botEdges[ iS ]._iL ];
- sides[ iS ]._faces = & facesOfSide[ iS ];
+ if ( !botEdges[ iE ]._isBase )
+ continue;
+ sides[ iS ]._topEdge = botEdges[ iE ]._edge;
+ sides[ iS ]._face = botF;
+ sides[ iS ]._leftSide = & sides[ botEdges[ iE ]._iR ];
+ sides[ iS ]._rightSide = & sides[ botEdges[ iE ]._iL ];
+ sides[ iS ]._isInternal = botEdges[ iE ].IsInternal();
+ sides[ iS ]._faces = & facesOfSide[ iS ];
sides[ iS ]._faces->Clear();
+ ++iS;
}
bool isOK = true; // ok for a current botF
if ( side._isCheckedEdge[ iE ] ) continue;
const TopoDS_Edge& vertE = side.Edge( iE );
const TopoDS_Shape& neighborF = getAnotherFace( side._face, vertE, facesOfEdge );
- bool isEdgeShared = adjSide->IsSideFace( neighborF );
- if ( isEdgeShared ) // vertE is shared with adjSide
+ bool isEdgeShared = (( adjSide->IsSideFace( neighborF, side._isInternal )) ||
+ ( adjSide == &side && neighborF.IsSame( side._face )) );
+ if ( isEdgeShared ) // vertE is shared with adjSide
{
isAdvanced = true;
side._isCheckedEdge[ iE ] = true;
{
stop = true;
}
- else if ( side._leftSide != & side ) // not closed side face
+ else if ( side._leftSide != & side && // not closed side face
+ side._leftSide->_faces->Contains( f ))
{
- if ( side._leftSide->_faces->Contains( f ))
- {
- stop = true; // probably f is the prism top face
- side._leftSide->_face.Nullify();
- side._leftSide->_topEdge.Nullify();
- }
- if ( side._rightSide->_faces->Contains( f ))
- {
- stop = true; // probably f is the prism top face
- side._rightSide->_face.Nullify();
- side._rightSide->_topEdge.Nullify();
- }
+ stop = true; // probably f is the prism top face
+ side._leftSide->_face.Nullify();
+ side._leftSide->_topEdge.Nullify();
+ }
+ else if ( side._rightSide != & side &&
+ side._rightSide->_faces->Contains( f ))
+ {
+ stop = true; // probably f is the prism top face
+ side._rightSide->_face.Nullify();
+ side._rightSide->_topEdge.Nullify();
}
if ( stop )
{
int faceID = allFaces.FindIndex( side._face );
side._edges = & faceEdgesVec[ faceID ];
if ( side._edges->empty() )
- if ( !getEdges( side._face, * side._edges, /*noHoles=*/true ))
+ if ( !getEdges( side._face, * side._edges, facesOfEdge, /*noHoles=*/true ))
break;
const int nbE = side._edges->size();
if ( nbE >= 4 )
list< SMESH_subMesh* > meshedSubMesh;
int nbFaces = 0;
//
- SMESH_subMesh* anyFaceSM = 0;
SMESH_subMeshIteratorPtr smIt = mainSubMesh->getDependsOnIterator(false,true);
while ( smIt->more() )
{
if ( face.ShapeType() > TopAbs_FACE ) break;
else if ( face.ShapeType() < TopAbs_FACE ) continue;
nbFaces++;
- anyFaceSM = sm;
// is quadrangle FACE?
list< TopoDS_Edge > orderedEdges;
// find vertex 000 - the one with smallest coordinates (for easy DEBUG :-)
TopoDS_Vertex V000;
- double minVal = DBL_MAX, minX, val;
+ double minVal = DBL_MAX, minX = 0, val;
for ( TopExp_Explorer exp( botSM->GetSubShape(), TopAbs_VERTEX );
exp.More(); exp.Next() )
{
if ( !myHelper->LoadNodeColumns( faceColumns, (*quad)->face, quadBot, meshDS ))
return error(COMPERR_BAD_INPUT_MESH, TCom("Can't find regular quadrangle mesh ")
<< "on a side face #" << MeshDS()->ShapeToIndex( (*quad)->face ));
+
+ if ( !faceColumns.empty() && (int)faceColumns.begin()->second.size() != VerticalSize() )
+ return error(COMPERR_BAD_INPUT_MESH, "Different 'vertical' discretization");
}
// edge columns
int id = MeshDS()->ShapeToIndex( *edgeIt );
