-# CEA/LGLS 2005, Francis KLOSS (OCC)
-# ==================================
+# -*- coding: iso-8859-1 -*-
+# Copyright (C) 2007-2014 CEA/DEN, EDF R&D, OPEN CASCADE
+#
+# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
-from geompy import *
+# ==================================
+#
+import salome
+salome.salome_init()
+import GEOM
+from salome.geom import geomBuilder
+geompy = geomBuilder.New(salome.myStudy)
-import smesh
+import SMESH, SALOMEDS
+from salome.smesh import smeshBuilder
+smesh = smeshBuilder.New(salome.myStudy)
# Geometrie
# =========
# Sphere
# ------
-sphere_centre = MakeVertex(0, 0, 0)
+sphere_centre = geompy.MakeVertex(0, 0, 0)
-sphere_pleine = MakeSpherePntR(sphere_centre, sphere_rayon)
+sphere_pleine = geompy.MakeSpherePntR(sphere_centre, sphere_rayon)
# Cube interieur
# --------------
boite_cote = sphere_rayon / 2
-boite = MakeBox(-boite_cote, -boite_cote, -boite_cote, +boite_cote, +boite_cote, +boite_cote)
+boite = geompy.MakeBox(-boite_cote, -boite_cote, -boite_cote, +boite_cote, +boite_cote, +boite_cote)
blocs = [boite]
# Decoupage sphere
# ----------------
-sphere_troue = MakeCut(sphere_pleine, boite)
+sphere_troue = geompy.MakeCut(sphere_pleine, boite)
+
+#sphere_outils = []
+#sphere_outils.append(MakePlane(sphere_centre, MakeVectorDXDYDZ( 1, 0, 1), plan_trim))
+#sphere_outils.append(MakePlane(sphere_centre, MakeVectorDXDYDZ( 1, 0, -1), plan_trim))
+#sphere_outils.append(MakePlane(sphere_centre, MakeVectorDXDYDZ( 1, 1, 0), plan_trim))
+#sphere_outils.append(MakePlane(sphere_centre, MakeVectorDXDYDZ(-1, 1, 0), plan_trim))
+
+f1 = geompy.MakePlane(sphere_centre, geompy.MakeVectorDXDYDZ( 1, 0, 1), plan_trim)
+f2 = geompy.MakePlane(sphere_centre, geompy.MakeVectorDXDYDZ(-1, 1, 0), plan_trim)
+f3 = geompy.MakePlane(sphere_centre, geompy.MakeVectorDXDYDZ( 1, 1, 0), plan_trim)
+f4 = geompy.MakePlane(sphere_centre, geompy.MakeVectorDXDYDZ( 1, 0, -1), plan_trim)
+
-sphere_outils = []
-sphere_outils.append(MakePlane(sphere_centre, MakeVectorDXDYDZ( 1, 0, 1), plan_trim))
-sphere_outils.append(MakePlane(sphere_centre, MakeVectorDXDYDZ( 1, 0, -1), plan_trim))
-sphere_outils.append(MakePlane(sphere_centre, MakeVectorDXDYDZ( 1, 1, 0), plan_trim))
-sphere_outils.append(MakePlane(sphere_centre, MakeVectorDXDYDZ(-1, 1, 0), plan_trim))
+#sphere_decoupee = MakePartition(solids, sphere_outils, [], [], ShapeType["SOLID"])
-sphere_decoupee = MakePartition([sphere_troue], sphere_outils, [], [], ShapeType["SOLID"])
+sphere_decoupee = geompy.MakePartition([sphere_troue], [f1], [], [], geompy.ShapeType["SOLID"])
+sphere_decoupee = geompy.MakePartition([sphere_decoupee], [f2], [], [], geompy.ShapeType["SOLID"])
+sphere_decoupee = geompy.MakePartition([sphere_decoupee], [f3], [], [], geompy.ShapeType["SOLID"])
+sphere_decoupee = geompy.MakePartition([sphere_decoupee], [f4], [], [], geompy.ShapeType["SOLID"])
-sphere_partie = GetBlockNearPoint(sphere_decoupee, MakeVertex(-sphere_rayon, 0, 0))
-sphere_bloc = RemoveExtraEdges(sphere_partie)
+sphere_partie = geompy.MakeCompound([sphere_decoupee])
+
+sphere_partie = geompy.GetBlockNearPoint(sphere_decoupee, geompy.MakeVertex(-sphere_rayon, 0, 0))
+sphere_bloc = geompy.RemoveExtraEdges(sphere_partie)
blocs.append(sphere_bloc)
pi2 = 3.141592653/2
-sphere_dir1 = MakeVectorDXDYDZ(0, 1, 0)
-sphere_dir2 = MakeVectorDXDYDZ(0, 0, 1)
+sphere_dir1 = geompy.MakeVectorDXDYDZ(0, 1, 0)
+sphere_dir2 = geompy.MakeVectorDXDYDZ(0, 0, 1)
-blocs.append(MakeRotation(sphere_bloc, sphere_dir1, +pi2))
-blocs.append(MakeRotation(sphere_bloc, sphere_dir1, -pi2))
+blocs.append(geompy.MakeRotation(sphere_bloc, sphere_dir1, +pi2))
+blocs.append(geompy.MakeRotation(sphere_bloc, sphere_dir1, -pi2))
-blocs.append(MakeRotation(sphere_bloc, sphere_dir2, +pi2))
-blocs.append(MakeRotation(sphere_bloc, sphere_dir2, -pi2))
+blocs.append(geompy.MakeRotation(sphere_bloc, sphere_dir2, +pi2))
+blocs.append(geompy.MakeRotation(sphere_bloc, sphere_dir2, -pi2))
-blocs.append(MakeMirrorByPoint(sphere_bloc, sphere_centre))
+blocs.append(geompy.MakeMirrorByPoint(sphere_bloc, sphere_centre))
# Cube exterieur
# --------------
-cube_plein = MakeBox(-cube_cote, -cube_cote, -cube_cote, +cube_cote, +cube_cote, +cube_cote)
-cube_trou = MakeCut(cube_plein, sphere_pleine)
-cube_decoupe = MakePartition([cube_trou], sphere_outils, [], [], ShapeType["SOLID"])
-cube_partie = GetBlockNearPoint(cube_decoupe, MakeVertex(-cube_cote, 0, 0))
-cube_bloc = RemoveExtraEdges(cube_partie)
+cube_plein = geompy.MakeBox(-cube_cote, -cube_cote, -cube_cote, +cube_cote, +cube_cote, +cube_cote)
+cube_trou = geompy.MakeCut(cube_plein, sphere_pleine)
+#cube_decoupe = MakePartition([cube_trou], sphere_outils, [], [], ShapeType["SOLID"])
+
+cube_decoupe = geompy.MakePartition([cube_trou], [f1], [], [], geompy.ShapeType["SOLID"])
+cube_decoupe = geompy.MakePartition([cube_decoupe], [f2], [], [], geompy.ShapeType["SOLID"])
+cube_decoupe = geompy.MakePartition([cube_decoupe], [f3], [], [], geompy.ShapeType["SOLID"])
+cube_decoupe = geompy.MakePartition([cube_decoupe], [f4], [], [], geompy.ShapeType["SOLID"])
+
+cube_decoupe = geompy.MakeCompound([cube_decoupe])
+
+
+cube_partie = geompy.GetBlockNearPoint(cube_decoupe, geompy.MakeVertex(-cube_cote, 0, 0))
+cube_bloc = geompy.RemoveExtraEdges(cube_partie)
blocs.append(cube_bloc)
-blocs.append(MakeRotation(cube_bloc, sphere_dir1, +pi2))
-blocs.append(MakeRotation(cube_bloc, sphere_dir1, -pi2))
+blocs.append(geompy.MakeRotation(cube_bloc, sphere_dir1, +pi2))
+blocs.append(geompy.MakeRotation(cube_bloc, sphere_dir1, -pi2))
-blocs.append(MakeRotation(cube_bloc, sphere_dir2, +pi2))
-blocs.append(MakeRotation(cube_bloc, sphere_dir2, -pi2))
+blocs.append(geompy.MakeRotation(cube_bloc, sphere_dir2, +pi2))
+blocs.append(geompy.MakeRotation(cube_bloc, sphere_dir2, -pi2))
-blocs.append(MakeMirrorByPoint(cube_bloc, sphere_centre))
+blocs.append(geompy.MakeMirrorByPoint(cube_bloc, sphere_centre))
# Piece
# -----
-piece_cpd = MakeCompound(blocs)
-piece = MakeGlueFaces(piece_cpd, 1.e-3)
+piece_cpd = geompy.MakeCompound(blocs)
+piece = geompy.MakeGlueFaces(piece_cpd, 1.e-3)
-piece_id = addToStudy(piece, "ex19_sphereINcube")
+piece_id = geompy.addToStudy(piece, "ex19_sphereINcube")
# Groupe geometrique
# ==================
# Definition du groupe
# --------------------
-groupe = CreateGroup(piece, ShapeType["SOLID"])
+groupe = geompy.CreateGroup(piece, geompy.ShapeType["SOLID"])
groupe_nom = "ex19_sphereINcube_interieur"
-addToStudy(groupe, groupe_nom)
+geompy.addToStudy(groupe, groupe_nom)
groupe.SetName(groupe_nom)
# Contenu du groupe
# -----------------
-groupe_sphere = GetShapesOnSphere(piece, ShapeType["SOLID"], sphere_centre, sphere_rayon, GEOM.ST_ONIN)
+groupe_sphere = geompy.GetShapesOnSphere(piece, geompy.ShapeType["SOLID"], sphere_centre, sphere_rayon, GEOM.ST_ONIN)
-UnionList(groupe, groupe_sphere)
+geompy.UnionList(groupe, groupe_sphere)
# Meshing
# =======
