+++ /dev/null
-# -*- coding: iso-8859-1 -*-
-# Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
-#
-# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# ==================================
-#
-import salome
-salome.salome_init()
-import GEOM
-from salome.geom import geomBuilder
-geompy = geomBuilder.New(salome.myStudy)
-
-import SMESH, SALOMEDS
-from salome.smesh import smeshBuilder
-smesh = smeshBuilder.New(salome.myStudy)
-
-# Geometrie
-# =========
-
-# Mailler en hexahedre une sphere dans un cube.
-
-# Donnees
-# -------
-
-sphere_rayon = 100
-
-cube_cote = 200
-
-plan_trim = 1000
-
-# Sphere
-# ------
-
-sphere_centre = geompy.MakeVertex(0, 0, 0)
-
-sphere_pleine = geompy.MakeSpherePntR(sphere_centre, sphere_rayon)
-
-# Cube interieur
-# --------------
-
-boite_cote = sphere_rayon / 2
-
-boite = geompy.MakeBox(-boite_cote, -boite_cote, -boite_cote, +boite_cote, +boite_cote, +boite_cote)
-
-blocs = [boite]
-
-# Decoupage sphere
-# ----------------
-
-sphere_troue = geompy.MakeCut(sphere_pleine, boite)
-
-#sphere_outils = []
-#sphere_outils.append(MakePlane(sphere_centre, MakeVectorDXDYDZ( 1, 0, 1), plan_trim))
-#sphere_outils.append(MakePlane(sphere_centre, MakeVectorDXDYDZ( 1, 0, -1), plan_trim))
-#sphere_outils.append(MakePlane(sphere_centre, MakeVectorDXDYDZ( 1, 1, 0), plan_trim))
-#sphere_outils.append(MakePlane(sphere_centre, MakeVectorDXDYDZ(-1, 1, 0), plan_trim))
-
-f1 = geompy.MakePlane(sphere_centre, geompy.MakeVectorDXDYDZ( 1, 0, 1), plan_trim)
-f2 = geompy.MakePlane(sphere_centre, geompy.MakeVectorDXDYDZ(-1, 1, 0), plan_trim)
-f3 = geompy.MakePlane(sphere_centre, geompy.MakeVectorDXDYDZ( 1, 1, 0), plan_trim)
-f4 = geompy.MakePlane(sphere_centre, geompy.MakeVectorDXDYDZ( 1, 0, -1), plan_trim)
-
-
-#sphere_decoupee = MakePartition(solids, sphere_outils, [], [], ShapeType["SOLID"])
-
-sphere_decoupee = geompy.MakePartition([sphere_troue], [f1], [], [], geompy.ShapeType["SOLID"])
-sphere_decoupee = geompy.MakePartition([sphere_decoupee], [f2], [], [], geompy.ShapeType["SOLID"])
-sphere_decoupee = geompy.MakePartition([sphere_decoupee], [f3], [], [], geompy.ShapeType["SOLID"])
-sphere_decoupee = geompy.MakePartition([sphere_decoupee], [f4], [], [], geompy.ShapeType["SOLID"])
-
-sphere_partie = geompy.MakeCompound([sphere_decoupee])
-
-sphere_partie = geompy.GetBlockNearPoint(sphere_decoupee, geompy.MakeVertex(-sphere_rayon, 0, 0))
-sphere_bloc = geompy.RemoveExtraEdges(sphere_partie)
-
-blocs.append(sphere_bloc)
-
-pi2 = 3.141592653/2
-
-sphere_dir1 = geompy.MakeVectorDXDYDZ(0, 1, 0)
-sphere_dir2 = geompy.MakeVectorDXDYDZ(0, 0, 1)
-
-blocs.append(geompy.MakeRotation(sphere_bloc, sphere_dir1, +pi2))
-blocs.append(geompy.MakeRotation(sphere_bloc, sphere_dir1, -pi2))
-
-blocs.append(geompy.MakeRotation(sphere_bloc, sphere_dir2, +pi2))
-blocs.append(geompy.MakeRotation(sphere_bloc, sphere_dir2, -pi2))
-
-blocs.append(geompy.MakeMirrorByPoint(sphere_bloc, sphere_centre))
-
-# Cube exterieur
-# --------------
-
-cube_plein = geompy.MakeBox(-cube_cote, -cube_cote, -cube_cote, +cube_cote, +cube_cote, +cube_cote)
-cube_trou = geompy.MakeCut(cube_plein, sphere_pleine)
-#cube_decoupe = MakePartition([cube_trou], sphere_outils, [], [], ShapeType["SOLID"])
-
-cube_decoupe = geompy.MakePartition([cube_trou], [f1], [], [], geompy.ShapeType["SOLID"])
-cube_decoupe = geompy.MakePartition([cube_decoupe], [f2], [], [], geompy.ShapeType["SOLID"])
-cube_decoupe = geompy.MakePartition([cube_decoupe], [f3], [], [], geompy.ShapeType["SOLID"])
-cube_decoupe = geompy.MakePartition([cube_decoupe], [f4], [], [], geompy.ShapeType["SOLID"])
-
-cube_decoupe = geompy.MakeCompound([cube_decoupe])
-
-
-cube_partie = geompy.GetBlockNearPoint(cube_decoupe, geompy.MakeVertex(-cube_cote, 0, 0))
-cube_bloc = geompy.RemoveExtraEdges(cube_partie)
-
-blocs.append(cube_bloc)
-
-blocs.append(geompy.MakeRotation(cube_bloc, sphere_dir1, +pi2))
-blocs.append(geompy.MakeRotation(cube_bloc, sphere_dir1, -pi2))
-
-blocs.append(geompy.MakeRotation(cube_bloc, sphere_dir2, +pi2))
-blocs.append(geompy.MakeRotation(cube_bloc, sphere_dir2, -pi2))
-
-blocs.append(geompy.MakeMirrorByPoint(cube_bloc, sphere_centre))
-
-# Piece
-# -----
-
-piece_cpd = geompy.MakeCompound(blocs)
-piece = geompy.MakeGlueFaces(piece_cpd, 1.e-3)
-
-piece_id = geompy.addToStudy(piece, "ex19_sphereINcube")
-
-# Groupe geometrique
-# ==================
-
-# Definition du groupe
-# --------------------
-
-groupe = geompy.CreateGroup(piece, geompy.ShapeType["SOLID"])
-
-groupe_nom = "ex19_sphereINcube_interieur"
-geompy.addToStudy(groupe, groupe_nom)
-groupe.SetName(groupe_nom)
-
-# Contenu du groupe
-# -----------------
-
-groupe_sphere = geompy.GetShapesOnSphere(piece, geompy.ShapeType["SOLID"], sphere_centre, sphere_rayon, GEOM.ST_ONIN)
-
-geompy.UnionList(groupe, groupe_sphere)
-
-# Meshing
-# =======
-
-# Create a hexahedral mesh
-# ------------------------
-
-hexa = smesh.Mesh(piece, "ex19_sphereINcube:hexa")
-
-algo = hexa.Segment()
-algo.NumberOfSegments(10)
-
-hexa.Quadrangle()
-
-hexa.Hexahedron()
-
-# Mesh calculus
-# -------------
-
-hexa.Compute()
-
-# Le groupe de mailles
-# --------------------
-
-hexa_groupe = hexa.Group(groupe)
-
-# Update object browser
-# ---------------------
-
-salome.sg.updateObjBrowser(True)
