-# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE
+# -*- coding: iso-8859-1 -*-
+# Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
#
-# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License.
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
#
+
# =======================================
#
-from geompy import *
+import salome
+salome.salome_init()
+import GEOM
+from salome.geom import geomBuilder
+geompy = geomBuilder.New(salome.myStudy)
-import smesh
+import SMESH, SALOMEDS
+from salome.smesh import smeshBuilder
+smesh = smeshBuilder.New(salome.myStudy)
# Geometry
# ========
# The parallelepipede
# -------------------
-p_boite = MakeBox(gx-g_dx, gy-g_dy, gz-g_dz, gx+g_dx, gy+g_dy, gz+g_dz)
+p_boite = geompy.MakeBox(gx-g_dx, gy-g_dy, gz-g_dz, gx+g_dx, gy+g_dy, gz+g_dz)
# The great cylinder
# ------------------
-g_base = MakeVertex(gx-g_dx, gy, gz)
-g_dir = MakeVectorDXDYDZ(1, 0, 0)
-g_cyl = MakeCylinder(g_base, g_dir, g_rayonGrand, g_dx*2)
+g_base = geompy.MakeVertex(gx-g_dx, gy, gz)
+g_dir = geompy.MakeVectorDXDYDZ(1, 0, 0)
+g_cyl = geompy.MakeCylinder(g_base, g_dir, g_rayonGrand, g_dx*2)
# The first hole
# --------------
-b_boite = MakeCut(p_boite , g_cyl)
+b_boite = geompy.MakeCut(p_boite , g_cyl)
# Partitioning
# ------------
-p_base = MakeVertex(gx, gy, gz)
+p_base = geompy.MakeVertex(gx, gy, gz)
p_tools = []
-p_tools.append(MakePlane(p_base, MakeVectorDXDYDZ(0, 1 , 0 ), g_trim))
-p_tools.append(MakePlane(p_base, MakeVectorDXDYDZ(0, g_dz, g_dy), g_trim))
-p_tools.append(MakePlane(p_base, MakeVectorDXDYDZ(0, -g_dz, g_dy), g_trim))
+p_tools.append(geompy.MakePlane(p_base, geompy.MakeVectorDXDYDZ(0, 1 , 0 ), g_trim))
+p_tools.append(geompy.MakePlane(p_base, geompy.MakeVectorDXDYDZ(0, g_dz, g_dy), g_trim))
+p_tools.append(geompy.MakePlane(p_base, geompy.MakeVectorDXDYDZ(0, -g_dz, g_dy), g_trim))
-p_tools.append(MakePlane(MakeVertex(gx-g_rayonPetit, gy, gz), g_dir, g_trim))
-p_tools.append(MakePlane(MakeVertex(gx+g_rayonPetit, gy, gz), g_dir, g_trim))
+p_tools.append(geompy.MakePlane(geompy.MakeVertex(gx-g_rayonPetit, gy, gz), g_dir, g_trim))
+p_tools.append(geompy.MakePlane(geompy.MakeVertex(gx+g_rayonPetit, gy, gz), g_dir, g_trim))
-p_piece = MakePartition([b_boite], p_tools, [], [], ShapeType["SOLID"])
+p_piece = geompy.MakePartition([b_boite], p_tools, [], [], geompy.ShapeType["SOLID"])
# The small cylinder
# ------------------
-c_cyl = MakeCylinder(p_base, MakeVectorDXDYDZ(0, 0, 1), g_rayonPetit, g_dz)
+c_cyl = geompy.MakeCylinder(p_base, geompy.MakeVectorDXDYDZ(0, 0, 1), g_rayonPetit, g_dz)
# The second hole
# ---------------
-d_element = SubShapeAllSorted(p_piece, ShapeType["SOLID"])
+d_element = geompy.SubShapeAllSorted(p_piece, geompy.ShapeType["SOLID"])
-d_element[ 8] = MakeCut(d_element[ 8], c_cyl)
-d_element[10] = MakeCut(d_element[10], c_cyl)
+d_element[ 8] = geompy.MakeCut(d_element[ 8], c_cyl)
+d_element[10] = geompy.MakeCut(d_element[10], c_cyl)
# Compound
# --------
-piece = RemoveExtraEdges(MakeCompound(d_element))
+piece = geompy.RemoveExtraEdges(geompy.MakeCompound(d_element))
+piece = geompy.MakeGlueFaces(piece, 1e-07)
# Add piece in study
# ------------------
-piece_id = addToStudy(piece, "ex16_cyl2complementary")
+piece_id = geompy.addToStudy(piece, "ex16_cyl2complementary")
# Meshing
# =======
# -----------------------
def local(x, y, z, d):
- edge = GetEdgeNearPoint(piece, MakeVertex(x, y, z))
+ edge = geompy.GetEdgeNearPoint(piece, geompy.MakeVertex(x, y, z))
algo = hexa.Segment(edge)
algo.NumberOfSegments(d)
algo.Propagation()
# -------------
hexa.Compute()
+
+# Update object browser
+# ---------------------
+
+salome.sg.updateObjBrowser(1)
