-# CEA/LGLS 2004-2005, Francis KLOSS (OCC)
-# =======================================
+# -*- coding: iso-8859-1 -*-
+# Copyright (C) 2007-2019 CEA/DEN, EDF R&D, OPEN CASCADE
+#
+# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
-from geompy import *
+# =======================================
+#
+import salome
+salome.salome_init()
+import GEOM
+from salome.geom import geomBuilder
+geompy = geomBuilder.New()
-import smesh
+import SMESH, SALOMEDS
+from salome.smesh import smeshBuilder
+smesh = smeshBuilder.New()
# Geometrie
# =========
cpd = []
-g_base = MakeVertex(cx, cy, cz)
-g_dir = MakeVectorDXDYDZ(0, 0, 1)
+g_base = geompy.MakeVertex(cx, cy, cz)
+g_dir = geompy.MakeVectorDXDYDZ(0, 0, 1)
t_hauteur = p_rayon+10.0
-g_cyl = MakeCylinder(g_base, g_dir, g_rayon, g_hauteur)
+g_cyl = geompy.MakeCylinder(g_base, g_dir, g_rayon, g_hauteur)
-g_coupe = MakeVectorDXDYDZ(1, 0, 0)
+g_coupe = geompy.MakeVectorDXDYDZ(1, 0, 0)
g_tools = []
-g_tools.append(MakePlane(MakeVertex(cx+t_hauteur, cy, cz), g_coupe, g_trim))
-g_tools.append(MakePlane(MakeVertex(cx-t_hauteur, cy, cz), g_coupe, g_trim))
+g_tools.append(geompy.MakePlane(geompy.MakeVertex(cx+t_hauteur, cy, cz), g_coupe, g_trim))
+g_tools.append(geompy.MakePlane(geompy.MakeVertex(cx-t_hauteur, cy, cz), g_coupe, g_trim))
-g_partie = MakePartition([g_cyl], g_tools, [], [], ShapeType["SOLID"])
-g_bas, g_centre, g_haut = SubShapeAllSorted(g_partie, ShapeType["SOLID"])
+g_partie = geompy.MakePartition([g_cyl], g_tools, [], [], geompy.ShapeType["SOLID"])
+g_bas, g_centre, g_haut = geompy.SubShapeAllSorted(g_partie, geompy.ShapeType["SOLID"])
# Partie basse du gros cylindre
# -----------------------------
b_hauteur = 10
b_base = 20
-b_boite = MakeBox(cx-t_hauteur, cy-b_base, cz, cx-t_hauteur-b_hauteur, cy+b_base, cz+g_hauteur)
+b_boite = geompy.MakeBox(cx-t_hauteur, cy-b_base, cz, cx-t_hauteur-b_hauteur, cy+b_base, cz+g_hauteur)
cpd.append(b_boite)
-b_cyl = MakeCut(g_bas, b_boite)
+b_cyl = geompy.MakeCut(g_bas, b_boite)
b_tools = []
-b_tools.append(MakePlane(MakeVertex(cx-t_hauteur-b_hauteur, cy+b_base, cz), MakeVectorDXDYDZ( 1, 1, 0), g_trim))
-b_tools.append(MakePlane(MakeVertex(cx-t_hauteur-b_hauteur, cy-b_base, cz), MakeVectorDXDYDZ(-1, 1, 0), g_trim))
+b_tools.append(geompy.MakePlane(geompy.MakeVertex(cx-t_hauteur-b_hauteur, cy+b_base, cz), geompy.MakeVectorDXDYDZ( 1, 1, 0), g_trim))
+b_tools.append(geompy.MakePlane(geompy.MakeVertex(cx-t_hauteur-b_hauteur, cy-b_base, cz), geompy.MakeVectorDXDYDZ(-1, 1, 0), g_trim))
-b_partie = MakePartition([b_cyl], b_tools, [], [], ShapeType["SOLID"])
-b_element = SubShapeAll(b_partie, ShapeType["SOLID"])
+b_partie = geompy.MakePartition([b_cyl], b_tools, [], [], geompy.ShapeType["SOLID"])
+b_element = geompy.SubShapeAll(b_partie, geompy.ShapeType["SOLID"])
cpd = cpd + b_element
# Partie haute du gros cylindre
# -----------------------------
-h_plan = MakePlane(g_base, g_coupe, g_trim)
+h_plan = geompy.MakePlane(g_base, g_coupe, g_trim)
-cpd.append(MakeMirrorByPlane(b_boite, h_plan))
+cpd.append(geompy.MakeMirrorByPlane(b_boite, h_plan))
for h in b_element:
- h_symetrie = MakeMirrorByPlane(h, h_plan)
+ h_symetrie = geompy.MakeMirrorByPlane(h, h_plan)
cpd.append(h_symetrie)
# Petit cylindre
py = cy-1.5*g_rayon
pz = cz+g_hauteur/2
-p_base = MakeVertex(cx, py, pz)
-p_dir = MakeVectorDXDYDZ(0, 1, 0)
-p_cyl = MakeCylinder(p_base, p_dir, p_rayon, p_hauteur)
+p_base = geompy.MakeVertex(cx, py, pz)
+p_dir = geompy.MakeVectorDXDYDZ(0, 1, 0)
+p_cyl = geompy.MakeCylinder(p_base, p_dir, p_rayon, p_hauteur)
-p_boite = MakeBox(px, py, pz-z_arete, cx+x_arete, py+p_hauteur, pz+z_arete)
+p_boite = geompy.MakeBox(px, py, pz-z_arete, cx+x_arete, py+p_hauteur, pz+z_arete)
# Partie interieure du petit cylindre
# -----------------------------------
-i_cyl = MakeCommon(p_cyl, g_cyl)
-i_tuyau = MakeCut(i_cyl, p_boite)
-i_boite = MakeCommon(p_boite, g_cyl)
+i_cyl = geompy.MakeCommon(p_cyl, g_cyl)
+i_tuyau = geompy.MakeCut(i_cyl, p_boite)
+i_boite = geompy.MakeCommon(p_boite, g_cyl)
# Partie exterieure du petit cylindre
# -----------------------------------
-e_cyl0 = MakeCut(p_cyl, g_cyl)
-e_cyl = SubShapeAllSorted(e_cyl0, ShapeType["SOLID"])
+e_cyl0 = geompy.MakeCut(p_cyl, g_cyl)
+e_cyl = geompy.SubShapeAllSorted(e_cyl0, geompy.ShapeType["SOLID"])
-e_tuyau = MakeCut(e_cyl[1], p_boite)
+e_tuyau = geompy.MakeCut(e_cyl[1], p_boite)
-e_boite0 = MakeCut(p_boite, g_cyl)
-e_boite = SubShapeAllSorted(e_boite0, ShapeType["SOLID"])
+e_boite0 = geompy.MakeCut(p_boite, g_cyl)
+e_boite = geompy.SubShapeAllSorted(e_boite0, geompy.ShapeType["SOLID"])
cpd.append(e_boite[1])
# Partie centrale du gros cylindre
# --------------------------------
-c_cyl = MakeCut(g_centre, p_cyl)
+c_cyl = geompy.MakeCut(g_centre, p_cyl)
# Partitionner
# ------------
p_tools = []
-p_tools.append(MakePlane(MakeVertex(px, py, pz-z_arete), MakeVectorDXDYDZ(-z_arete, 0, x_arete), g_trim))
-p_tools.append(MakePlane(MakeVertex(px, py, pz+z_arete), MakeVectorDXDYDZ( z_arete, 0, x_arete), g_trim))
+p_tools.append(geompy.MakePlane(geompy.MakeVertex(px, py, pz-z_arete), geompy.MakeVectorDXDYDZ(-z_arete, 0, x_arete), g_trim))
+p_tools.append(geompy.MakePlane(geompy.MakeVertex(px, py, pz+z_arete), geompy.MakeVectorDXDYDZ( z_arete, 0, x_arete), g_trim))
-p_partie = MakePartition([e_tuyau], p_tools, [], [], ShapeType["SOLID"])
-p_element = SubShapeAll(p_partie, ShapeType["SOLID"])
+p_partie = geompy.MakePartition([e_tuyau], p_tools, [], [], geompy.ShapeType["SOLID"])
+p_element = geompy.SubShapeAll(p_partie, geompy.ShapeType["SOLID"])
cpd = cpd + p_element
-q_partie = MakePartition([i_tuyau, c_cyl], p_tools, [], [], ShapeType["SOLID"])
-q_element = SubShapeAll(q_partie, ShapeType["SOLID"])
+q_partie = geompy.MakePartition([i_tuyau, c_cyl], p_tools, [], [], geompy.ShapeType["SOLID"])
+q_element = geompy.SubShapeAll(q_partie, geompy.ShapeType["SOLID"])
q_element = q_element + [i_boite]
q_tools = []
-q_tools.append(MakePlane(MakeVertex(cx, cy-b_base, cz), MakeVectorDXDYDZ(0, 1, 0), g_trim))
-q_tools.append(MakePlane(MakeVertex(cx, cy+b_base, cz), MakeVectorDXDYDZ(0, 1, 0), g_trim))
+q_tools.append(geompy.MakePlane(geompy.MakeVertex(cx, cy-b_base, cz), geompy.MakeVectorDXDYDZ(0, 1, 0), g_trim))
+q_tools.append(geompy.MakePlane(geompy.MakeVertex(cx, cy+b_base, cz), geompy.MakeVectorDXDYDZ(0, 1, 0), g_trim))
r_element = []
for e in q_element:
- r_partie = MakePartition([e], q_tools, [], [], ShapeType["SOLID"])
- r_element = r_element + SubShapeAll(r_partie, ShapeType["SOLID"])
+ r_partie = geompy.MakePartition([e], q_tools, [], [], geompy.ShapeType["SOLID"])
+ r_element = r_element + geompy.SubShapeAll(r_partie, geompy.ShapeType["SOLID"])
cpd = cpd + r_element
# Compound
# --------
-piece = RemoveExtraEdges(MakeCompound(cpd))
+piece = geompy.RemoveExtraEdges(geompy.MakeCompound(cpd), True)
# Ajouter la piece dans l'etude
# -----------------------------
-piece_id = addToStudy(piece, "ex15_cyl2geometry")
+piece_id = geompy.addToStudy(piece, "ex15_cyl2geometry")
# Meshing
# =======
# -------------
hexa.Compute()
+
+# Update object browser
+# ---------------------
+
+salome.sg.updateObjBrowser()
