-# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+# -*- coding: iso-8859-1 -*-
+# Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License.
+# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
#
-# CEA/LGLS 2004-2005, Francis KLOSS (OCC)
-# =======================================
-from geompy import *
+# =======================================
+#
+import salome
+salome.salome_init()
+import GEOM
+from salome.geom import geomBuilder
+geompy = geomBuilder.New(salome.myStudy)
-import smesh
+import SMESH, SALOMEDS
+from salome.smesh import smeshBuilder
+smesh = smeshBuilder.New(salome.myStudy)
# Geometrie
# =========
# Construire le cylindre
# ----------------------
-c_point = MakeVertex(g_ox, g_oy, g_oz-g_cyl_demiHauteur)
-c_dir = MakeVectorDXDYDZ(0, 0, 1)
+c_point = geompy.MakeVertex(g_ox, g_oy, g_oz-g_cyl_demiHauteur)
+c_dir = geompy.MakeVectorDXDYDZ(0, 0, 1)
c_hauteur = 2*g_cyl_demiHauteur
-c_cylindre = MakeCylinder(c_point, c_dir, g_cyl_rayon, c_hauteur)
+c_cylindre = geompy.MakeCylinder(c_point, c_dir, g_cyl_rayon, c_hauteur)
# Trouer le cylindre par un minuscule cylindre excentre
# -----------------------------------------------------
t_hauteur = g_cyl_demiHauteur
-t_point = MakeVertex(g_ox-g_trou_centre, g_oy, g_oz-t_hauteur)
-t_trou = MakeCylinder(t_point, c_dir, g_trou_rayon, 2*t_hauteur)
+t_point = geompy.MakeVertex(g_ox-g_trou_centre, g_oy, g_oz-t_hauteur)
+t_trou = geompy.MakeCylinder(t_point, c_dir, g_trou_rayon, 2*t_hauteur)
-t_piece = MakeCut(c_cylindre, t_trou)
+t_piece = geompy.MakeCut(c_cylindre, t_trou)
# Geometrie hexahedrique
# ======================
# --------
h_outils = []
-h_outils.append(MakePlane(t_point, MakeVectorDXDYDZ(1, 0, 0), g_trim))
-h_outils.append(MakePlane(t_point, MakeVectorDXDYDZ(0, 1, 0), g_trim))
+h_outils.append(geompy.MakePlane(t_point, geompy.MakeVectorDXDYDZ(1, 0, 0), g_trim))
+h_outils.append(geompy.MakePlane(t_point, geompy.MakeVectorDXDYDZ(0, 1, 0), g_trim))
-h_piece = MakePartition([t_piece], h_outils, [], [], ShapeType["SOLID"])
+h_piece = geompy.MakePartition([t_piece], h_outils, [], [], geompy.ShapeType["SOLID"])
# Decouper pour les conditions locales
# ------------------------------------
l_hauteur = c_hauteur/l_n
while l_i<l_n:
- l_outils.append(MakePlane(MakeVertex(g_ox, g_oy, g_oz-g_cyl_demiHauteur+l_i*l_hauteur), c_dir, g_trim))
+ l_outils.append(geompy.MakePlane(geompy.MakeVertex(g_ox, g_oy, g_oz-g_cyl_demiHauteur+l_i*l_hauteur), c_dir, g_trim))
l_i = l_i+1
-piece = MakePartition([h_piece], l_outils, [], [], ShapeType["SOLID"])
+piece = geompy.MakePartition([h_piece], l_outils, [], [], geompy.ShapeType["SOLID"])
# Ajouter la piece dans l'etude
# -----------------------------
-piece_id = addToStudy(piece, "ex14_cyl1holed")
+piece_id = geompy.addToStudy(piece, "ex14_cyl1holed")
# Maillage
# ========
m_z = g_oz-g_cyl_demiHauteur+m_h/2
while m_i<m_n:
- m_p = MakeVertex(m_x, m_y, m_z + m_i*m_h)
- m_e = GetEdgeNearPoint(piece, m_p)
+ m_p = geompy.MakeVertex(m_x, m_y, m_z + m_i*m_h)
+ m_e = geompy.GetEdgeNearPoint(piece, m_p)
m_a = hexa.Segment(m_e)
m_a.NumberOfSegments(m_d[m_i])
m_a.Propagation()
# --------------------
hexa.Compute()
+
+# Update object browser
+# ---------------------
+
+salome.sg.updateObjBrowser(True)
