-# CEA/LGLS 2004-2005, Francis KLOSS (OCC)
-# =======================================
+# -*- coding: iso-8859-1 -*-
+# Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
+#
+# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
-from geompy import *
+# =======================================
+#
+import salome
+salome.salome_init()
+import GEOM
+from salome.geom import geomBuilder
+geompy = geomBuilder.New(salome.myStudy)
-import smesh
+import SMESH, SALOMEDS
+from salome.smesh import smeshBuilder
+smesh = smeshBuilder.New(salome.myStudy)
# Geometry
# ========
# Solids and rotation to prevent repair
# -------------------------------------
-s_boite = MakeBox(g_x-g_arete, g_y-g_hauteur, g_z-g_arete, g_x+g_arete, g_y+g_hauteur, g_z+g_arete)
+s_boite = geompy.MakeBox(g_x-g_arete, g_y-g_hauteur, g_z-g_arete, g_x+g_arete, g_y+g_hauteur, g_z+g_arete)
s_pi4 = 3.141592653/4
s_hauteur = 2*g_hauteur
-s_centre = MakeVertex(g_x, g_y-g_hauteur, g_z)
-s_dir = MakeVectorDXDYDZ(0, 1, 0)
+s_centre = geompy.MakeVertex(g_x, g_y-g_hauteur, g_z)
+s_dir = geompy.MakeVectorDXDYDZ(0, 1, 0)
-s_cyl0 = MakeCylinder(s_centre, s_dir, g_rayon3, s_hauteur)
-s_cyl1 = MakeRotation(s_cyl0, s_dir, s_pi4)
+s_cyl0 = geompy.MakeCylinder(s_centre, s_dir, g_rayon3, s_hauteur)
+s_cyl1 = geompy.MakeRotation(s_cyl0, s_dir, s_pi4)
-s_blo1 = MakeCut(s_boite, s_cyl1)
+s_blo1 = geompy.MakeCut(s_boite, s_cyl1)
-s_cyl0 = MakeCylinder(s_centre, s_dir, g_rayon2, s_hauteur)
-s_cyl2 = MakeRotation(s_cyl0, s_dir, s_pi4)
+s_cyl0 = geompy.MakeCylinder(s_centre, s_dir, g_rayon2, s_hauteur)
+s_cyl2 = geompy.MakeRotation(s_cyl0, s_dir, s_pi4)
-s_blo2 = MakeCut(s_cyl1, s_cyl2)
+s_blo2 = geompy.MakeCut(s_cyl1, s_cyl2)
-s_cyl0 = MakeCylinder(s_centre, s_dir, g_rayon1, s_hauteur)
-s_cyl3 = MakeRotation(s_cyl0, s_dir, s_pi4)
+s_cyl0 = geompy.MakeCylinder(s_centre, s_dir, g_rayon1, s_hauteur)
+s_cyl3 = geompy.MakeRotation(s_cyl0, s_dir, s_pi4)
-s_blo3 = MakeCut(s_cyl2, s_cyl3)
+s_blo3 = geompy.MakeCut(s_cyl2, s_cyl3)
s_arete = g_rayon1/2
-s_blo4 = MakeBox(g_x-s_arete, g_y-g_hauteur, g_z-s_arete, g_x+s_arete, g_y+g_hauteur, g_z+s_arete)
+s_blo4 = geompy.MakeBox(g_x-s_arete, g_y-g_hauteur, g_z-s_arete, g_x+s_arete, g_y+g_hauteur, g_z+s_arete)
-s_blo5 = MakeCut(s_cyl3, s_blo4)
+s_blo5 = geompy.MakeCut(s_cyl3, s_blo4)
# Partition
# ---------
p_tools = []
-p_tools.append(MakePlane(s_centre, MakeVectorDXDYDZ( 1, 0, 1), g_trim))
-p_tools.append(MakePlane(s_centre, MakeVectorDXDYDZ(-1, 0, 1), g_trim))
+p_tools.append(geompy.MakePlane(s_centre, geompy.MakeVectorDXDYDZ( 1, 0, 1), g_trim))
+p_tools.append(geompy.MakePlane(s_centre, geompy.MakeVectorDXDYDZ(-1, 0, 1), g_trim))
-p_partie = MakePartition([s_blo1, s_blo2, s_blo3, s_blo5], p_tools, [], [], ShapeType["SOLID"])
+p_partie = geompy.MakePartition([s_blo1, s_blo2, s_blo3, s_blo5], p_tools, [], [], geompy.ShapeType["SOLID"])
# Compound and glue
# -----------------
-c_blocs = SubShapeAll(p_partie, ShapeType["SOLID"])
+c_blocs = geompy.SubShapeAll(p_partie, geompy.ShapeType["SOLID"])
c_blocs.append(s_blo4)
-c_cpd = MakeCompound(c_blocs)
+c_cpd = geompy.MakeCompound(c_blocs)
-c_element = MakeGlueFaces(c_cpd, 1e-4)
+c_element = geompy.MakeGlueFaces(c_cpd, 1e-4)
# Grid
# ----
-piece = MakeMultiTranslation2D(c_element, MakeVectorDXDYDZ(1, 0, 0), 2*g_arete, g_grid, MakeVectorDXDYDZ(0, 0, 1), 2*g_arete, g_grid)
+piece = geompy.MakeMultiTranslation2D(c_element, geompy.MakeVectorDXDYDZ(1, 0, 0), 2*g_arete, g_grid, geompy.MakeVectorDXDYDZ(0, 0, 1), 2*g_arete, g_grid)
# Add in study
# ------------
-piece_id = addToStudy(piece, "ex12_grid17partition")
+piece_id = geompy.addToStudy(piece, "ex12_grid17partition")
# Meshing
# =======
# -------------
hexa.Compute()
+
+# Update object browser
+# ---------------------
+
+salome.sg.updateObjBrowser(True)
