+++ /dev/null
-# -*- coding: iso-8859-1 -*-
-# Copyright (C) 2007-2012 CEA/DEN, EDF R&D, OPEN CASCADE
-#
-# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# =======================================
-#
-from geompy import *
-
-import smesh
-
-# Geometry
-# ========
-
-# grid compound of 17 x 17 elements
-# an element is compound of 3 concentric cylinders
-# an element is centered in a square of the grid
-
-# prism the grid, and mesh it in hexahedral way
-
-# Values
-# ------
-
-g_x = 0
-g_y = 0
-g_z = 0
-
-g_arete = 50
-g_hauteur = 30
-
-g_rayon1 = 20
-g_rayon2 = 30
-g_rayon3 = 40
-
-g_grid = 17
-
-g_trim = 1000
-
-# Solids and rotation to prevent repair
-# -------------------------------------
-
-s_boite = MakeBox(g_x-g_arete, g_y-g_hauteur, g_z-g_arete, g_x+g_arete, g_y+g_hauteur, g_z+g_arete)
-
-s_pi4 = 3.141592653/4
-s_hauteur = 2*g_hauteur
-s_centre = MakeVertex(g_x, g_y-g_hauteur, g_z)
-s_dir = MakeVectorDXDYDZ(0, 1, 0)
-
-s_cyl0 = MakeCylinder(s_centre, s_dir, g_rayon3, s_hauteur)
-s_cyl1 = MakeRotation(s_cyl0, s_dir, s_pi4)
-
-s_blo1 = MakeCut(s_boite, s_cyl1)
-
-s_cyl0 = MakeCylinder(s_centre, s_dir, g_rayon2, s_hauteur)
-s_cyl2 = MakeRotation(s_cyl0, s_dir, s_pi4)
-
-s_blo2 = MakeCut(s_cyl1, s_cyl2)
-
-s_cyl0 = MakeCylinder(s_centre, s_dir, g_rayon1, s_hauteur)
-s_cyl3 = MakeRotation(s_cyl0, s_dir, s_pi4)
-
-s_blo3 = MakeCut(s_cyl2, s_cyl3)
-
-s_arete = g_rayon1/2
-
-s_blo4 = MakeBox(g_x-s_arete, g_y-g_hauteur, g_z-s_arete, g_x+s_arete, g_y+g_hauteur, g_z+s_arete)
-
-s_blo5 = MakeCut(s_cyl3, s_blo4)
-
-# Partition
-# ---------
-
-p_tools = []
-p_tools.append(MakePlane(s_centre, MakeVectorDXDYDZ( 1, 0, 1), g_trim))
-p_tools.append(MakePlane(s_centre, MakeVectorDXDYDZ(-1, 0, 1), g_trim))
-
-p_partie = MakePartition([s_blo1, s_blo2, s_blo3, s_blo5], p_tools, [], [], ShapeType["SOLID"])
-
-# Compound and glue
-# -----------------
-
-c_blocs = SubShapeAll(p_partie, ShapeType["SOLID"])
-c_blocs.append(s_blo4)
-
-c_cpd = MakeCompound(c_blocs)
-
-c_element = MakeGlueFaces(c_cpd, 1e-4)
-
-# Grid
-# ----
-
-piece = MakeMultiTranslation2D(c_element, MakeVectorDXDYDZ(1, 0, 0), 2*g_arete, g_grid, MakeVectorDXDYDZ(0, 0, 1), 2*g_arete, g_grid)
-
-# Add in study
-# ------------
-
-piece_id = addToStudy(piece, "ex12_grid17partition")
-
-# Meshing
-# =======
-
-smesh.SetCurrentStudy(salome.myStudy)
-
-# Create a hexahedral mesh
-# ------------------------
-
-hexa = smesh.Mesh(piece, "ex12_grid17partition:hexa")
-
-algo = hexa.Segment()
-algo.NumberOfSegments(2)
-
-hexa.Quadrangle()
-
-hexa.Hexahedron()
-
-# Mesh calculus
-# -------------
-
-hexa.Compute()
