0023360: [CEA 1963] Use salome.sg.updateObjBrowser(True) instead of salome.sg.updateO...

[modules/smesh.git] / src / SMESH_SWIG / ex11_grid3partition.py

diff --git a/src/SMESH_SWIG/ex11_grid3partition.py b/src/SMESH_SWIG/ex11_grid3partition.py
index 252aa5563c2ffba920ae8f1626069c51c2777e7a..91b6a3d269ec9f1b42bf07a8f58c4f355985ba54 100644 (file)
--- a/src/SMESH_SWIG/ex11_grid3partition.py
+++ b/src/SMESH_SWIG/ex11_grid3partition.py
@@ -1,5 +1,5 @@
 #  -*- coding: iso-8859-1 -*-
-# Copyright (C) 2007-2012  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
@@ -7,7 +7,7 @@
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
 # License as published by the Free Software Foundation; either
-# version 2.1 of the License.
+# version 2.1 of the License, or (at your option) any later version.
 #
 # This library is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -23,9 +23,15 @@
 
 # =======================================
 #
-from geompy import *
+import salome
+salome.salome_init()
+import GEOM
+from salome.geom import geomBuilder
+geompy = geomBuilder.New(salome.myStudy)
 
-import smesh
+import SMESH, SALOMEDS
+from salome.smesh import smeshBuilder
+smesh =  smeshBuilder.New(salome.myStudy)
 
 # Geometry
 # ========
@@ -58,52 +64,50 @@ g_trim = 1000
 # Element
 # -------
 
-e_boite = MakeBox(g_x-g_arete, g_y-g_hauteur, g_z-g_arete,  g_x+g_arete, g_y+g_hauteur, g_z+g_arete)
+e_boite = geompy.MakeBox(g_x-g_arete, g_y-g_hauteur, g_z-g_arete,  g_x+g_arete, g_y+g_hauteur, g_z+g_arete)
 
 e_hauteur = 2*g_hauteur
-e_centre  = MakeVertex(g_x, g_y-g_hauteur, g_z)
-e_dir     = MakeVectorDXDYDZ(0, 1, 0)
+e_centre  = geompy.MakeVertex(g_x, g_y-g_hauteur, g_z)
+e_dir     = geompy.MakeVectorDXDYDZ(0, 1, 0)
 
-e_cyl1 = MakeCylinder(e_centre, e_dir, g_rayon3, e_hauteur)
+e_cyl1 = geompy.MakeCylinder(e_centre, e_dir, g_rayon3, e_hauteur)
 
-e_blo1 = MakeCut(e_boite, e_cyl1)
+e_blo1 = geompy.MakeCut(e_boite, e_cyl1)
 
-e_cyl2 = MakeCylinder(e_centre, e_dir, g_rayon2, e_hauteur)
+e_cyl2 = geompy.MakeCylinder(e_centre, e_dir, g_rayon2, e_hauteur)
 
-e_blo2 = MakeCut(e_cyl1, e_cyl2)
+e_blo2 = geompy.MakeCut(e_cyl1, e_cyl2)
 
-e_cyl3 = MakeCylinder(e_centre, e_dir, g_rayon1, e_hauteur)
+e_cyl3 = geompy.MakeCylinder(e_centre, e_dir, g_rayon1, e_hauteur)
 
-e_blo3 = MakeCut(e_cyl2, e_cyl3)
+e_blo3 = geompy.MakeCut(e_cyl2, e_cyl3)
 
 # Partition and repair
 # --------------------
 
 p_tools = []
-p_tools.append(MakePlane(e_centre, MakeVectorDXDYDZ( 1, 0, 1), g_trim))
-p_tools.append(MakePlane(e_centre, MakeVectorDXDYDZ(-1, 0, 1), g_trim))
+p_tools.append(geompy.MakePlane(e_centre, geompy.MakeVectorDXDYDZ( 1, 0, 1), g_trim))
+p_tools.append(geompy.MakePlane(e_centre, geompy.MakeVectorDXDYDZ(-1, 0, 1), g_trim))
 
-p_part = MakePartition([e_blo1, e_blo2, e_blo3], p_tools, [], [], ShapeType["SOLID"])
+p_part = geompy.MakePartition([e_blo1, e_blo2, e_blo3], p_tools, [], [], geompy.ShapeType["SOLID"])
 
-p_element = RemoveExtraEdges(p_part, doUnionFaces=True)
+p_element = geompy.RemoveExtraEdges(p_part, doUnionFaces=True)
 
 # Grid and glue
 # -------------
 
-grid = MakeMultiTranslation2D(p_element, MakeVectorDXDYDZ(1, 0, 0), 2*g_arete, g_grid, MakeVectorDXDYDZ(0, 0, 1), 2*g_arete, g_grid)
+grid = geompy.MakeMultiTranslation2D(p_element, geompy.MakeVectorDXDYDZ(1, 0, 0), 2*g_arete, g_grid, geompy.MakeVectorDXDYDZ(0, 0, 1), 2*g_arete, g_grid)
 
-piece = MakeGlueFaces(grid, 1e-5)
+piece = geompy.MakeGlueFaces(grid, 1e-5)
 
 # Add in study
 # ------------
 
-piece_id = addToStudy(piece, "ex11_grid3partition")
+piece_id = geompy.addToStudy(piece, "ex11_grid3partition")
 
 # Meshing
 # =======
 
-smesh.SetCurrentStudy(salome.myStudy)
-
 # Create a hexahedral mesh
 # ------------------------
 
@@ -120,3 +124,8 @@ hexa.Hexahedron()
 # -------------
 
 hexa.Compute()
+
+# Update object browser
+# ---------------------
+
+salome.sg.updateObjBrowser(True)