+++ /dev/null
-# -*- coding: iso-8859-1 -*-
-# Copyright (C) 2007-2019 CEA/DEN, EDF R&D, OPEN CASCADE
-#
-# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# =======================================
-#
-import salome
-salome.salome_init()
-import GEOM
-from salome.geom import geomBuilder
-geompy = geomBuilder.New()
-
-import SMESH, SALOMEDS
-from salome.smesh import smeshBuilder
-smesh = smeshBuilder.New()
-
-import math
-
-# Geometry
-# ========
-
-# A centered holed cube build by build by points, edges, faces and solids
-
-# Values
-# ------
-
-ox = 0
-oy = 0
-oz = 0
-
-longueur = 100
-largeur = 80
-hauteur = 50
-
-rayon = 10
-
-# Points
-# ------
-
-basePoint111 = geompy.MakeVertex(ox , oy, oz)
-basePoint211 = geompy.MakeVertex(ox+longueur, oy, oz)
-basePoint112 = geompy.MakeVertex(ox , oy, oz+largeur)
-basePoint212 = geompy.MakeVertex(ox+longueur, oy, oz+largeur)
-
-cx = ox+longueur/2
-cy = oy
-cz = oz+largeur/2
-
-ll = longueur/largeur
-ll = ll*ll
-dx = rayon/math.sqrt(1+ll)
-dz = rayon/math.sqrt(1+1/ll)
-
-circlePoint1 = geompy.MakeVertex(cx-dx, cy, cz-dz)
-circlePoint2 = geompy.MakeVertex(cx+dx, cy, cz-dz)
-circlePoint3 = geompy.MakeVertex(cx+dx, cy, cz+dz)
-circlePoint4 = geompy.MakeVertex(cx-dx, cy, cz+dz)
-
-# Edges
-# -----
-
-squareEdge1 = geompy.MakeEdge(basePoint111, basePoint211)
-squareEdge2 = geompy.MakeEdge(basePoint211, basePoint212)
-squareEdge3 = geompy.MakeEdge(basePoint212, basePoint112)
-squareEdge4 = geompy.MakeEdge(basePoint112, basePoint111)
-
-diagEdge1 = geompy.MakeEdge(basePoint111, circlePoint1)
-diagEdge2 = geompy.MakeEdge(basePoint211, circlePoint2)
-diagEdge3 = geompy.MakeEdge(basePoint212, circlePoint3)
-diagEdge4 = geompy.MakeEdge(basePoint112, circlePoint4)
-
-arcEdge1 = geompy.MakeArc(circlePoint1, geompy.MakeVertex(cx , cy, cz-rayon), circlePoint2)
-arcEdge2 = geompy.MakeArc(circlePoint2, geompy.MakeVertex(cx+rayon, cy, cz ), circlePoint3)
-arcEdge3 = geompy.MakeArc(circlePoint3, geompy.MakeVertex(cx , cy, cz+rayon), circlePoint4)
-arcEdge4 = geompy.MakeArc(circlePoint4, geompy.MakeVertex(cx-rayon, cy, cz ), circlePoint1)
-
-# Faces
-# -----
-
-baseFace1 = geompy.MakeQuad(squareEdge1, diagEdge2, arcEdge1, diagEdge1)
-baseFace2 = geompy.MakeQuad(squareEdge2, diagEdge3, arcEdge2, diagEdge2)
-baseFace3 = geompy.MakeQuad(squareEdge3, diagEdge4, arcEdge3, diagEdge3)
-baseFace4 = geompy.MakeQuad(squareEdge4, diagEdge1, arcEdge4, diagEdge4)
-
-# Solids
-# ------
-
-baseVector = geompy.MakeVectorDXDYDZ(0, 1, 0)
-
-baseSolid1 = geompy.MakePrismVecH(baseFace1, baseVector, hauteur)
-baseSolid2 = geompy.MakePrismVecH(baseFace2, baseVector, hauteur)
-baseSolid3 = geompy.MakePrismVecH(baseFace3, baseVector, hauteur)
-baseSolid4 = geompy.MakePrismVecH(baseFace4, baseVector, hauteur)
-
-# Compound
-# --------
-
-c_l = []
-c_l.append(baseSolid1)
-c_l.append(baseSolid2)
-c_l.append(baseSolid3)
-c_l.append(baseSolid4)
-
-c_cpd = geompy.MakeCompound(c_l)
-piece = geompy.MakeGlueFaces(c_cpd, 1.e-5)
-
-# Add in study
-# ------------
-
-piece_id = geompy.addToStudy(piece, "ex05_hole1build")
-
-# Meshing
-# =======
-
-# Create a hexahedral mesh
-# ------------------------
-
-hexa = smesh.Mesh(piece, "ex05_hole1build:hexa")
-
-algo = hexa.Segment()
-
-algo.NumberOfSegments(6, 3)
-
-hexa.Quadrangle()
-
-hexa.Hexahedron()
-
-# Mesh calculus
-# -------------
-
-hexa.Compute()
-
-# Update object browser
-# ---------------------
-
-salome.sg.updateObjBrowser()
