+# -*- coding: iso-8859-1 -*-
+# Copyright (C) 2007-2022 CEA/DEN, EDF R&D, OPEN CASCADE
#
+# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
# Hexahedrization of the geometry generated by the Python script
# SMESH_fixation.py
# Hypothesis and algorithms for the mesh generation are global
#
-
+import salome
import SMESH_fixation
-import StdMeshers
+import SMESH, SALOMEDS
+from salome.smesh import smeshBuilder
+smesh = smeshBuilder.New()
compshell = SMESH_fixation.compshell
idcomp = SMESH_fixation.idcomp
geompy = SMESH_fixation.geompy
salome = SMESH_fixation.salome
-ShapeTypeShell = 3
-ShapeTypeFace = 4
-ShapeTypeEdge = 6
-
-print "Analysis of the geometry to be meshed :"
-subShellList=geompy.SubShapeAll(compshell,ShapeTypeShell)
-subFaceList=geompy.SubShapeAll(compshell,ShapeTypeFace)
-subEdgeList=geompy.SubShapeAll(compshell,ShapeTypeEdge)
+print("Analysis of the geometry to be meshed :")
+subShellList = geompy.SubShapeAll(compshell, geompy.ShapeType["SHELL"])
+subFaceList = geompy.SubShapeAll(compshell, geompy.ShapeType["FACE"])
+subEdgeList = geompy.SubShapeAll(compshell, geompy.ShapeType["EDGE"])
-print "number of Shells in compshell : ",len(subShellList)
-print "number of Faces in compshell : ",len(subFaceList)
-print "number of Edges in compshell : ",len(subEdgeList)
+print("number of Shells in compshell : ", len(subShellList))
+print("number of Faces in compshell : ", len(subFaceList))
+print("number of Edges in compshell : ", len(subEdgeList))
-status=geompy.CheckShape(compshell)
-print " check status ", status
+status = geompy.CheckShape(compshell)
+print(" check status ", status)
### ---------------------------- SMESH --------------------------------------
-smesh = salome.lcc.FindOrLoadComponent("FactoryServer", "SMESH")
-
-smeshgui = salome.ImportComponentGUI("SMESH")
-smeshgui.Init(salome.myStudyId)
-
-### ---- create Hypothesis
-
-print "-------------------------- create Hypothesis"
-
-print "-------------------------- NumberOfSegments"
-
-numberOfSegments = 5
-
-hypNbSeg=smesh.CreateHypothesis("NumberOfSegments", "libStdMeshersEngine.so")
-hypNbSeg.SetNumberOfSegments(numberOfSegments)
-
-print hypNbSeg.GetName()
-print hypNbSeg.GetId()
-print hypNbSeg.GetNumberOfSegments()
+smesh.UpdateStudy()
-smeshgui.SetName(salome.ObjectToID(hypNbSeg), "NumberOfSegments_5")
-
-# ---- create Algorithms
-
-print "-------------------------- create Algorithms"
-
-print "-------------------------- Regular_1D"
-
-regular1D=smesh.CreateHypothesis("Regular_1D", "libStdMeshersEngine.so")
-
-smeshgui.SetName(salome.ObjectToID(regular1D), "Wire Discretisation")
-
-print "-------------------------- Quadrangle_2D"
-
-quad2D=smesh.CreateHypothesis("Quadrangle_2D", "libStdMeshersEngine.so")
-
-smeshgui.SetName(salome.ObjectToID(quad2D), "Quadrangle_2D")
+# ---- init a Mesh with the compshell
+shape_mesh = salome.IDToObject( idcomp )
-print "-------------------------- Hexa_3D"
+mesh = smesh.Mesh(shape_mesh, "MeshCompShell")
-hexa3D=smesh.CreateHypothesis("Hexa_3D", "libStdMeshersEngine.so")
-smeshgui.SetName(salome.ObjectToID(hexa3D), "Hexa_3D")
+# ---- set Hypothesis and Algorithm
-# ---- init a Mesh with the compshell
-shape_mesh = salome.IDToObject( idcomp )
-
-mesh=smesh.CreateMesh(shape_mesh)
-smeshgui.SetName(salome.ObjectToID(mesh), "MeshCompShell")
+print("-------------------------- NumberOfSegments")
+numberOfSegments = 5
-# ---- add hypothesis to compshell
+regular1D = mesh.Segment()
+regular1D.SetName("Wire Discretisation")
+hypNbSeg = regular1D.NumberOfSegments(numberOfSegments)
+print(hypNbSeg.GetName())
+print(hypNbSeg.GetId())
+print(hypNbSeg.GetNumberOfSegments())
+smesh.SetName(hypNbSeg, "NumberOfSegments_" + str(numberOfSegments))
-print "-------------------------- add hypothesis to compshell"
+print("-------------------------- Quadrangle_2D")
-mesh.AddHypothesis(shape_mesh,regular1D)
-mesh.AddHypothesis(shape_mesh,hypNbSeg)
+quad2D = mesh.Quadrangle()
+quad2D.SetName("Quadrangle_2D")
-mesh.AddHypothesis(shape_mesh,quad2D)
-mesh.AddHypothesis(shape_mesh,hexa3D)
+print("-------------------------- Hexa_3D")
-salome.sg.updateObjBrowser(1)
+hexa3D = mesh.Hexahedron()
+hexa3D.SetName("Hexa_3D")
-print "-------------------------- compute compshell"
-ret=smesh.Compute(mesh, shape_mesh)
-print ret
+print("-------------------------- compute compshell")
+ret = mesh.Compute()
+print(ret)
if ret != 0:
- log=mesh.GetLog(0) # no erase trace
- for linelog in log:
- print linelog
- print "Information about the MeshcompShel:"
- print "Number of nodes : ", mesh.NbNodes()
- print "Number of edges : ", mesh.NbEdges()
- print "Number of faces : ", mesh.NbFaces()
- print "Number of quadrangles : ", mesh.NbQuadrangles()
- print "Number of volumes : ", mesh.NbVolumes()
- print "Number of hexahedrons : ", mesh.NbHexas()
+ log = mesh.GetLog(0) # no erase trace
+ # for linelog in log:
+ # print(linelog)
+ print("Information about the MeshcompShel:")
+ print("Number of nodes : ", mesh.NbNodes())
+ print("Number of edges : ", mesh.NbEdges())
+ print("Number of faces : ", mesh.NbFaces())
+ print("Number of quadrangles : ", mesh.NbQuadrangles())
+ print("Number of volumes : ", mesh.NbVolumes())
+ print("Number of hexahedrons : ", mesh.NbHexas())
else:
- print "problem when Computing the mesh"
+ print("problem when Computing the mesh")
+
+salome.sg.updateObjBrowser()
