23514: EDF 16031 - SMESH freezes

[modules/smesh.git] / src / SMESH_SWIG / SMESH_controls.py

diff --git a/src/SMESH_SWIG/SMESH_controls.py b/src/SMESH_SWIG/SMESH_controls.py
index d7f533cab41766d84e3afd6279050193e78d2443..dfefee94cb1c4d6fcf07265435d56b37b82aa169 100644 (file)
--- a/src/SMESH_SWIG/SMESH_controls.py
+++ b/src/SMESH_SWIG/SMESH_controls.py
@@ -1,5 +1,5 @@
 #  -*- coding: iso-8859-1 -*-
-# Copyright (C) 2007-2012  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
@@ -7,7 +7,7 @@
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
 # License as published by the Free Software Foundation; either
-# version 2.1 of the License.
+# version 2.1 of the License, or (at your option) any later version.
 #
 # This library is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -25,17 +25,18 @@
 #  Author : Sergey LITONIN
 #  Module : SMESH
 #
-import smesh
+import salome
 import SMESH_mechanic
 
-salome = smesh.salome
-mesh   = SMESH_mechanic.mesh
-
+import SMESH, SALOMEDS
+from salome.smesh import smeshBuilder
+smesh =  smeshBuilder.New(salome.myStudy)
+mesh = SMESH_mechanic.mesh
 
 # ---- Criterion : AREA > 100
 
 # create group
-aGroup = mesh.MakeGroup("Area > 100", smesh.FACE, smesh.FT_Area, smesh.FT_MoreThan, 100)
+aGroup = mesh.MakeGroup("Area > 100", SMESH.FACE, SMESH.FT_Area, SMESH.FT_MoreThan, 100)
 
 # print result
 anIds = aGroup.GetIDs()
@@ -47,7 +48,7 @@ print "Criterion: Area > 100 Nb = ", len( anIds )
 # ----  Criterion : Taper > 3e-15
 
 # create group
-aGroup = mesh.MakeGroup("Taper > 3e-15", smesh.FACE, smesh.FT_Taper, smesh.FT_MoreThan, 3e-15)
+aGroup = mesh.MakeGroup("Taper > 3e-15", SMESH.FACE, SMESH.FT_Taper, SMESH.FT_MoreThan, 3e-15)
 
 # print result
 anIds = aGroup.GetIDs()
@@ -59,7 +60,7 @@ print "Criterion: Taper > 3e-15 Nb = ", len( anIds )
 # ----  Criterion : ASPECT RATIO > 1.3
 
 # create group
-aGroup = mesh.MakeGroup("Aspect Ratio > 1.3", smesh.FACE, smesh.FT_AspectRatio, smesh.FT_MoreThan, 1.3)
+aGroup = mesh.MakeGroup("Aspect Ratio > 1.3", SMESH.FACE, SMESH.FT_AspectRatio, SMESH.FT_MoreThan, 1.3)
 
 # print result
 anIds = aGroup.GetIDs()
@@ -71,7 +72,7 @@ print "Criterion: Aspect Ratio > 1.3 Nb = ", len( anIds )
 # ----  Criterion : MINIMUM ANGLE < 30
 
 # create group
-aGroup = mesh.MakeGroup("Minimum Angle < 30", smesh.FACE, smesh.FT_MinimumAngle, smesh.FT_LessThan, 30)
+aGroup = mesh.MakeGroup("Minimum Angle < 30", SMESH.FACE, SMESH.FT_MinimumAngle, SMESH.FT_LessThan, 30)
 
 # print result
 anIds = aGroup.GetIDs()
@@ -83,7 +84,7 @@ print "Criterion: Minimum Angle < 30 Nb = ", len( anIds )
 # ---- Criterion : Warp > 2e-13
 
 # create group
-aGroup = mesh.MakeGroup("Warp > 2e-13", smesh.FACE, smesh.FT_Warping, smesh.FT_MoreThan, 2e-13 )
+aGroup = mesh.MakeGroup("Warp > 2e-13", SMESH.FACE, SMESH.FT_Warping, SMESH.FT_MoreThan, 2e-13 )
 
 # print result
 anIds = aGroup.GetIDs()
@@ -95,7 +96,7 @@ print "Criterion: Warp > 2e-13 Nb = ", len( anIds )
 # ---- Criterion : Skew > 18
 
 # create group
-aGroup = mesh.MakeGroup("Skew > 18", smesh.FACE, smesh.FT_Skew, smesh.FT_MoreThan, 18 )
+aGroup = mesh.MakeGroup("Skew > 18", SMESH.FACE, SMESH.FT_Skew, SMESH.FT_MoreThan, 18 )
 
 # print result
 anIds = aGroup.GetIDs()
@@ -107,7 +108,7 @@ print "Criterion: Skew > 18 Nb = ", len( anIds )
 # Criterion : Length > 10
 
 # create group
-aGroup = mesh.MakeGroup("Length > 10", smesh.FACE, smesh.FT_Length, smesh.FT_MoreThan, 10 )
+aGroup = mesh.MakeGroup("Length > 10", SMESH.FACE, SMESH.FT_Length, SMESH.FT_MoreThan, 10 )
 
 # print result
 anIds = aGroup.GetIDs()
@@ -119,7 +120,7 @@ print "Criterion: Length > 10 Nb = ", len( anIds )
 # Criterion : Borders at multi-connections = 2
 
 # create group
-aGroup = mesh.MakeGroup("Borders at multi-connections = 2", smesh.EDGE, smesh.FT_MultiConnection, smesh.FT_EqualTo, 2)
+aGroup = mesh.MakeGroup("Borders at multi-connections = 2", SMESH.EDGE, SMESH.FT_MultiConnection, SMESH.FT_EqualTo, 2)
 
 # print result
 anIds = aGroup.GetIDs()
@@ -131,7 +132,7 @@ print "Criterion: Borders at multi-connections = 2 Nb = ", len( anIds )
 # Criterion : Element Diameter 2D > 10
 
 # create group
-aGroup = mesh.MakeGroup("Element Diameter 2D > 10", smesh.FACE, smesh.FT_MaxElementLength2D, smesh.FT_MoreThan, 10 )
+aGroup = mesh.MakeGroup("Element Diameter 2D > 10", SMESH.FACE, SMESH.FT_MaxElementLength2D, SMESH.FT_MoreThan, 10 )
 
 # print result
 anIds = aGroup.GetIDs()
@@ -140,4 +141,4 @@ print "Criterion: Element Diameter 2D > 10 Nb = ", len( anIds )
   #print anIds[ i ]
 
 
-salome.sg.updateObjBrowser(1)
+salome.sg.updateObjBrowser(True)