Affichage du diagnostic

[modules/smesh.git] / src / SMESH_SWIG / SMESH_controls.py

diff --git a/src/SMESH_SWIG/SMESH_controls.py b/src/SMESH_SWIG/SMESH_controls.py
index e2ff1be234151dd2d0cd4f417a8799eb5944e851..d081611f92cff71cc6246c1bb981909d31f23c0e 100644 (file)
--- a/src/SMESH_SWIG/SMESH_controls.py
+++ b/src/SMESH_SWIG/SMESH_controls.py
@@ -1,5 +1,5 @@
 #  -*- coding: iso-8859-1 -*-
-# Copyright (C) 2007-2013  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2021  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
@@ -7,7 +7,7 @@
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
 # License as published by the Free Software Foundation; either
-# version 2.1 of the License.
+# version 2.1 of the License, or (at your option) any later version.
 #
 # This library is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -25,11 +25,13 @@
 #  Author : Sergey LITONIN
 #  Module : SMESH
 #
+import salome
 import SMESH_mechanic
 
 import SMESH, SALOMEDS
 from salome.smesh import smeshBuilder
-smesh =  smeshBuilder.New(salome.myStudy)
+smesh =  smeshBuilder.New()
+mesh = SMESH_mechanic.mesh
 
 # ---- Criterion : AREA > 100
 
@@ -38,7 +40,7 @@ aGroup = mesh.MakeGroup("Area > 100", SMESH.FACE, SMESH.FT_Area, SMESH.FT_MoreTh
 
 # print result
 anIds = aGroup.GetIDs()
-print "Criterion: Area > 100 Nb = ", len( anIds )
+print("Criterion: Area > 100 Nb = ", len( anIds ))
 #for i in range( len( anIds ) ):
   #print anIds[ i ]
 
@@ -50,7 +52,7 @@ aGroup = mesh.MakeGroup("Taper > 3e-15", SMESH.FACE, SMESH.FT_Taper, SMESH.FT_Mo
 
 # print result
 anIds = aGroup.GetIDs()
-print "Criterion: Taper > 3e-15 Nb = ", len( anIds )
+print("Criterion: Taper > 3e-15 Nb = ", len( anIds ))
 #for i in range( len( anIds ) ):
   #print anIds[ i ]
 
@@ -62,7 +64,7 @@ aGroup = mesh.MakeGroup("Aspect Ratio > 1.3", SMESH.FACE, SMESH.FT_AspectRatio,
 
 # print result
 anIds = aGroup.GetIDs()
-print "Criterion: Aspect Ratio > 1.3 Nb = ", len( anIds )
+print("Criterion: Aspect Ratio > 1.3 Nb = ", len( anIds ))
 #for i in range( len( anIds ) ):
   #print anIds[ i ]
 
@@ -74,7 +76,7 @@ aGroup = mesh.MakeGroup("Minimum Angle < 30", SMESH.FACE, SMESH.FT_MinimumAngle,
 
 # print result
 anIds = aGroup.GetIDs()
-print "Criterion: Minimum Angle < 30 Nb = ", len( anIds )
+print("Criterion: Minimum Angle < 30 Nb = ", len( anIds ))
 #for i in range( len( anIds ) ):
   #print anIds[ i ]
 
@@ -86,7 +88,7 @@ aGroup = mesh.MakeGroup("Warp > 2e-13", SMESH.FACE, SMESH.FT_Warping, SMESH.FT_M
 
 # print result
 anIds = aGroup.GetIDs()
-print "Criterion: Warp > 2e-13 Nb = ", len( anIds )
+print("Criterion: Warp > 2e-13 Nb = ", len( anIds ))
 #for i in range( len( anIds ) ):
   #print anIds[ i ]
 
@@ -98,7 +100,7 @@ aGroup = mesh.MakeGroup("Skew > 18", SMESH.FACE, SMESH.FT_Skew, SMESH.FT_MoreTha
 
 # print result
 anIds = aGroup.GetIDs()
-print "Criterion: Skew > 18 Nb = ", len( anIds )
+print("Criterion: Skew > 18 Nb = ", len( anIds ))
 #for i in range( len( anIds ) ):
   #print anIds[ i ]
 
@@ -110,7 +112,7 @@ aGroup = mesh.MakeGroup("Length > 10", SMESH.FACE, SMESH.FT_Length, SMESH.FT_Mor
 
 # print result
 anIds = aGroup.GetIDs()
-print "Criterion: Length > 10 Nb = ", len( anIds )
+print("Criterion: Length > 10 Nb = ", len( anIds ))
 #for i in range( len( anIds ) ):
   #print anIds[ i ]
 
@@ -122,7 +124,7 @@ aGroup = mesh.MakeGroup("Borders at multi-connections = 2", SMESH.EDGE, SMESH.FT
 
 # print result
 anIds = aGroup.GetIDs()
-print "Criterion: Borders at multi-connections = 2 Nb = ", len( anIds )
+print("Criterion: Borders at multi-connections = 2 Nb = ", len( anIds ))
 #for i in range( len( anIds ) ):
   #print anIds[ i ]
 
@@ -134,9 +136,9 @@ aGroup = mesh.MakeGroup("Element Diameter 2D > 10", SMESH.FACE, SMESH.FT_MaxElem
 
 # print result
 anIds = aGroup.GetIDs()
-print "Criterion: Element Diameter 2D > 10 Nb = ", len( anIds )
+print("Criterion: Element Diameter 2D > 10 Nb = ", len( anIds ))
 #for i in range( len( anIds ) ):
   #print anIds[ i ]
 
 
-salome.sg.updateObjBrowser(1)
+salome.sg.updateObjBrowser()