+# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
#
# Tetrahedrization of the geometry union of 2 boxes having a face in common
# Hypothesis and algorithms for the mesh generation are global
import StdMeshers
import NETGENPlugin
-geom = salome.lcc.FindOrLoadComponent("FactoryServer", "GEOM")
smesh = salome.lcc.FindOrLoadComponent("FactoryServer", "SMESH")
smeshgui = salome.ImportComponentGUI("SMESH")
smeshgui.Init(salome.myStudyId);
-ShapeTypeShell = 3
-ShapeTypeFace = 4
-ShapeTypeEdge = 6
-
# ---- define 2 boxes box1 and box2
box1 = geompy.MakeBox(0., 0., 0., 100., 200., 300.)
-idbox1 = geompy.addToStudy(box1,"box1")
+idbox1 = geompy.addToStudy(box1, "box1")
print "Analysis of the geometry box1 :"
-subShellList=geompy.SubShapeAll(box1,ShapeTypeShell)
-subFaceList=geompy.SubShapeAll(box1,ShapeTypeFace)
-subEdgeList=geompy.SubShapeAll(box1,ShapeTypeEdge)
+subShellList = geompy.SubShapeAll(box1, geompy.ShapeType["SHELL"])
+subFaceList = geompy.SubShapeAll(box1, geompy.ShapeType["FACE"])
+subEdgeList = geompy.SubShapeAll(box1, geompy.ShapeType["EDGE"])
-print "number of Shells in box1 : ",len(subShellList)
-print "number of Faces in box1 : ",len(subFaceList)
-print "number of Edges in box1 : ",len(subEdgeList)
+print "number of Shells in box1 : ", len(subShellList)
+print "number of Faces in box1 : ", len(subFaceList)
+print "number of Edges in box1 : ", len(subEdgeList)
box2 = geompy.MakeBox(100., 0., 0., 200., 200., 300.)
-idbox2 = geompy.addToStudy(box2,"box2")
+idbox2 = geompy.addToStudy(box2, "box2")
print "Analysis of the geometry box2 :"
-subShellList=geompy.SubShapeAll(box2,ShapeTypeShell)
-subFaceList=geompy.SubShapeAll(box2,ShapeTypeFace)
-subEdgeList=geompy.SubShapeAll(box2,ShapeTypeEdge)
-
-print "number of Shells in box2 : ",len(subShellList)
-print "number of Faces in box2 : ",len(subFaceList)
-print "number of Edges in box2 : ",len(subEdgeList)
+subShellList = geompy.SubShapeAll(box2, geompy.ShapeType["SHELL"])
+subFaceList = geompy.SubShapeAll(box2, geompy.ShapeType["FACE"])
+subEdgeList = geompy.SubShapeAll(box2, geompy.ShapeType["EDGE"])
-blocs = []
-blocs.append(box1._get_Name())
-blocs.append(box2._get_Name())
+print "number of Shells in box2 : ", len(subShellList)
+print "number of Faces in box2 : ", len(subFaceList)
+print "number of Edges in box2 : ", len(subEdgeList)
# append the tow boxes to make ine shel, referrencing only once
# the internal interface
-shell = geompy.Partition(blocs)
-idshell = geompy.addToStudy(shell,"shell")
+shell = geompy.MakePartition([box1, box2])
+idshell = geompy.addToStudy(shell, "shell")
print "Analysis of the geometry shell (union of box1 and box2) :"
-subShellList=geompy.SubShapeAll(shell,ShapeTypeShell)
-subFaceList=geompy.SubShapeAll(shell,ShapeTypeFace)
-subEdgeList=geompy.SubShapeAll(shell,ShapeTypeEdge)
+subShellList = geompy.SubShapeAll(shell, geompy.ShapeType["SHELL"])
+subFaceList = geompy.SubShapeAll(shell, geompy.ShapeType["FACE"])
+subEdgeList = geompy.SubShapeAll(shell, geompy.ShapeType["EDGE"])
-print "number of Shells in shell : ",len(subShellList)
-print "number of Faces in shell : ",len(subFaceList)
-print "number of Edges in shell : ",len(subEdgeList)
+print "number of Shells in shell : ", len(subShellList)
+print "number of Faces in shell : ", len(subFaceList)
+print "number of Edges in shell : ", len(subEdgeList)
### ---------------------------- SMESH --------------------------------------
numberOfSegments = 10
-hypNbSeg=smesh.CreateHypothesis("NumberOfSegments", "libStdMeshersEngine.so")
+hypNbSeg = smesh.CreateHypothesis("NumberOfSegments", "libStdMeshersEngine.so")
hypNbSeg.SetNumberOfSegments(numberOfSegments)
print hypNbSeg.GetName()
maxElementArea = 500
-hypArea=smesh.CreateHypothesis("MaxElementArea", "libStdMeshersEngine.so")
+hypArea = smesh.CreateHypothesis("MaxElementArea", "libStdMeshersEngine.so")
hypArea.SetMaxElementArea(maxElementArea)
print hypArea.GetName()
maxElementVolume = 500
-hypVolume=smesh.CreateHypothesis("MaxElementVolume", "libStdMeshersEngine.so")
+hypVolume = smesh.CreateHypothesis("MaxElementVolume", "libStdMeshersEngine.so")
hypVolume.SetMaxElementVolume(maxElementVolume)
print hypVolume.GetName()
print "-------------------------- Regular_1D"
-regular1D=smesh.CreateHypothesis("Regular_1D", "libStdMeshersEngine.so")
+regular1D = smesh.CreateHypothesis("Regular_1D", "libStdMeshersEngine.so")
smeshgui.SetName(salome.ObjectToID(regular1D), "Wire Discretisation")
print "-------------------------- MEFISTO_2D"
-mefisto2D=smesh.CreateHypothesis("MEFISTO_2D", "libStdMeshersEngine.so")
+mefisto2D = smesh.CreateHypothesis("MEFISTO_2D", "libStdMeshersEngine.so")
smeshgui.SetName(salome.ObjectToID(mefisto2D), "MEFISTO_2D")
print "-------------------------- NETGEN_3D"
-netgen3D=smesh.CreateHypothesis("NETGEN_3D", "libNETGENEngine.so")
+netgen3D = smesh.CreateHypothesis("NETGEN_3D", "libNETGENEngine.so")
smeshgui.SetName(salome.ObjectToID(netgen3D), "NETGEN_3D")
# ---- init a Mesh with the shell
salome.sg.updateObjBrowser(1)
print "-------------------------- compute shell"
-ret= smesh.Compute(mesh,shell)
+ret = smesh.Compute(mesh,shell)
print ret
if ret != 0:
- log=mesh.GetLog(0) # no erase trace
+ log = mesh.GetLog(0) # no erase trace
for linelog in log:
print linelog
print "Information about the MeshBox2:"
