+# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
#
# Tetrahedrization of the geometry union of 2 boxes having a face in common
# Hypothesis and algorithms for the mesh generation are global
#
import salome
-from salome import sg
-
import geompy
-import SMESH
-import smeshpy
+import StdMeshers
+import NETGENPlugin
-geom = geompy.geom
-myBuilder = geompy.myBuilder
+smesh = salome.lcc.FindOrLoadComponent("FactoryServer", "SMESH")
-ShapeTypeShell = 3
-ShapeTypeFace = 4
-ShapeTypeEdge = 6
+smeshgui = salome.ImportComponentGUI("SMESH")
+smeshgui.Init(salome.myStudyId);
# ---- define 2 boxes box1 and box2
box1 = geompy.MakeBox(0., 0., 0., 100., 200., 300.)
-idbox1 = geompy.addToStudy(box1,"box1")
+idbox1 = geompy.addToStudy(box1, "box1")
print "Analysis of the geometry box1 :"
-subShellList=geompy.SubShapeAll(box1,ShapeTypeShell)
-subFaceList=geompy.SubShapeAll(box1,ShapeTypeFace)
-subEdgeList=geompy.SubShapeAll(box1,ShapeTypeEdge)
+subShellList = geompy.SubShapeAll(box1, geompy.ShapeType["SHELL"])
+subFaceList = geompy.SubShapeAll(box1, geompy.ShapeType["FACE"])
+subEdgeList = geompy.SubShapeAll(box1, geompy.ShapeType["EDGE"])
-print "number of Shells in box1 : ",len(subShellList)
-print "number of Faces in box1 : ",len(subFaceList)
-print "number of Edges in box1 : ",len(subEdgeList)
+print "number of Shells in box1 : ", len(subShellList)
+print "number of Faces in box1 : ", len(subFaceList)
+print "number of Edges in box1 : ", len(subEdgeList)
box2 = geompy.MakeBox(100., 0., 0., 200., 200., 300.)
-idbox2 = geompy.addToStudy(box2,"box2")
+idbox2 = geompy.addToStudy(box2, "box2")
print "Analysis of the geometry box2 :"
-subShellList=geompy.SubShapeAll(box2,ShapeTypeShell)
-subFaceList=geompy.SubShapeAll(box2,ShapeTypeFace)
-subEdgeList=geompy.SubShapeAll(box2,ShapeTypeEdge)
-
-print "number of Shells in box2 : ",len(subShellList)
-print "number of Faces in box2 : ",len(subFaceList)
-print "number of Edges in box2 : ",len(subEdgeList)
+subShellList = geompy.SubShapeAll(box2, geompy.ShapeType["SHELL"])
+subFaceList = geompy.SubShapeAll(box2, geompy.ShapeType["FACE"])
+subEdgeList = geompy.SubShapeAll(box2, geompy.ShapeType["EDGE"])
-blocs = []
-blocs.append(box1._get_Name())
-blocs.append(box2._get_Name())
+print "number of Shells in box2 : ", len(subShellList)
+print "number of Faces in box2 : ", len(subFaceList)
+print "number of Edges in box2 : ", len(subEdgeList)
# append the tow boxes to make ine shel, referrencing only once
# the internal interface
-shell = geompy.Partition(blocs)
-idshell = geompy.addToStudy(shell,"shell")
+shell = geompy.MakePartition([box1, box2])
+idshell = geompy.addToStudy(shell, "shell")
print "Analysis of the geometry shell (union of box1 and box2) :"
-subShellList=geompy.SubShapeAll(shell,ShapeTypeShell)
-subFaceList=geompy.SubShapeAll(shell,ShapeTypeFace)
-subEdgeList=geompy.SubShapeAll(shell,ShapeTypeEdge)
+subShellList = geompy.SubShapeAll(shell, geompy.ShapeType["SHELL"])
+subFaceList = geompy.SubShapeAll(shell, geompy.ShapeType["FACE"])
+subEdgeList = geompy.SubShapeAll(shell, geompy.ShapeType["EDGE"])
-print "number of Shells in shell : ",len(subShellList)
-print "number of Faces in shell : ",len(subFaceList)
-print "number of Edges in shell : ",len(subEdgeList)
+print "number of Shells in shell : ", len(subShellList)
+print "number of Faces in shell : ", len(subFaceList)
+print "number of Edges in shell : ", len(subEdgeList)
-# ---- launch SMESH
-smeshgui = salome.ImportComponentGUI("SMESH")
-smeshgui.Init(salome.myStudyId)
-
-gen=smeshpy.smeshpy()
+### ---------------------------- SMESH --------------------------------------
# ---- create Hypothesis
numberOfSegments = 10
-hyp1=gen.CreateHypothesis("NumberOfSegments")
-hypNbSeg=hyp1._narrow(SMESH.SMESH_NumberOfSegments)
+hypNbSeg = smesh.CreateHypothesis("NumberOfSegments", "libStdMeshersEngine.so")
hypNbSeg.SetNumberOfSegments(numberOfSegments)
-hypNbSegID = hypNbSeg.GetId()
+
print hypNbSeg.GetName()
-print hypNbSegID
+print hypNbSeg.GetId()
print hypNbSeg.GetNumberOfSegments()
-idseg = smeshgui.AddNewHypothesis( salome.orb.object_to_string(hypNbSeg) )
-smeshgui.SetName(idseg, "NumberOfSegments")
+smeshgui.SetName(salome.ObjectToID(hypNbSeg), "NumberOfSegments_10")
print "-------------------------- MaxElementArea"
maxElementArea = 500
-hyp2=gen.CreateHypothesis("MaxElementArea")
-hypArea=hyp2._narrow(SMESH.SMESH_MaxElementArea)
+hypArea = smesh.CreateHypothesis("MaxElementArea", "libStdMeshersEngine.so")
hypArea.SetMaxElementArea(maxElementArea)
+
print hypArea.GetName()
print hypArea.GetId()
print hypArea.GetMaxElementArea()
-idarea = smeshgui.AddNewHypothesis( salome.orb.object_to_string(hypArea) )
-smeshgui.SetName(idarea, "MaxElementArea")
+smeshgui.SetName(salome.ObjectToID(hypArea), "MaxElementArea_500")
print "-------------------------- MaxElementVolume"
maxElementVolume = 500
-hyp3=gen.CreateHypothesis("MaxElementVolume")
-hypVolume=hyp3._narrow(SMESH.SMESH_MaxElementVolume)
+hypVolume = smesh.CreateHypothesis("MaxElementVolume", "libStdMeshersEngine.so")
hypVolume.SetMaxElementVolume(maxElementVolume)
+
print hypVolume.GetName()
print hypVolume.GetId()
print hypVolume.GetMaxElementVolume()
-idvolume = smeshgui.AddNewHypothesis( salome.orb.object_to_string(hypVolume) )
-smeshgui.SetName(idvolume, "MaxElementVolume")
+smeshgui.SetName(salome.ObjectToID(hypVolume), "MaxElementVolume_500")
# ---- create Algorithms
print "-------------------------- Regular_1D"
-hypothesis=gen.CreateHypothesis("Regular_1D")
-regular1D = hypothesis._narrow(SMESH.SMESH_Regular_1D)
-regularID = smeshgui.AddNewAlgorithms( salome.orb.object_to_string(regular1D) )
-smeshgui.SetName(regularID, "Wire Discretisation")
+regular1D = smesh.CreateHypothesis("Regular_1D", "libStdMeshersEngine.so")
+smeshgui.SetName(salome.ObjectToID(regular1D), "Wire Discretisation")
print "-------------------------- MEFISTO_2D"
-hypothesis=gen.CreateHypothesis("MEFISTO_2D")
-mefisto2D = hypothesis._narrow(SMESH.SMESH_MEFISTO_2D)
-mefistoID = smeshgui.AddNewAlgorithms( salome.orb.object_to_string(mefisto2D) )
-smeshgui.SetName(mefistoID, "MEFISTO_2D")
+mefisto2D = smesh.CreateHypothesis("MEFISTO_2D", "libStdMeshersEngine.so")
+smeshgui.SetName(salome.ObjectToID(mefisto2D), "MEFISTO_2D")
print "-------------------------- NETGEN_3D"
-hypothesis=gen.CreateHypothesis("NETGEN_3D")
-netgen3D = hypothesis._narrow(SMESH.SMESH_NETGEN_3D)
-netgenID = smeshgui.AddNewAlgorithms( salome.orb.object_to_string(netgen3D) )
-smeshgui.SetName(netgenID, "NETGEN_3D")
+netgen3D = smesh.CreateHypothesis("NETGEN_3D", "libNETGENEngine.so")
+smeshgui.SetName(salome.ObjectToID(netgen3D), "NETGEN_3D")
# ---- init a Mesh with the shell
-mesh=gen.Init(idshell)
-idmesh = smeshgui.AddNewMesh( salome.orb.object_to_string(mesh) )
-smeshgui.SetName(idmesh, "MeshBox2")
-smeshgui.SetShape(idshell, idmesh)
+mesh = smesh.CreateMesh(shell)
+smeshgui.SetName(salome.ObjectToID(mesh), "MeshBox2")
# ---- add hypothesis to shell
print "-------------------------- add hypothesis to shell"
-ret=mesh.AddHypothesis(shell,regular1D)
-print ret
-ret=mesh.AddHypothesis(shell,hypNbSeg)
-print ret
-ret=mesh.AddHypothesis(shell,mefisto2D)
-print ret
-ret=mesh.AddHypothesis(shell,hypArea)
-print ret
-ret=mesh.AddHypothesis(shell,netgen3D)
-print ret
-ret=mesh.AddHypothesis(shell,hypVolume)
-print ret
+mesh.AddHypothesis(shell,regular1D)
+mesh.AddHypothesis(shell,hypNbSeg)
-smeshgui.SetAlgorithms( idmesh, regularID)
-smeshgui.SetHypothesis( idmesh, idseg )
-smeshgui.SetAlgorithms( idmesh, mefistoID )
-smeshgui.SetHypothesis( idmesh, idarea )
-smeshgui.SetAlgorithms( idmesh, netgenID )
-smeshgui.SetHypothesis( idmesh, idvolume )
+mesh.AddHypothesis(shell,mefisto2D)
+mesh.AddHypothesis(shell,hypArea)
-sg.updateObjBrowser(1)
+mesh.AddHypothesis(shell,netgen3D)
+mesh.AddHypothesis(shell,hypVolume)
+salome.sg.updateObjBrowser(1)
print "-------------------------- compute shell"
-ret=gen.Compute(mesh,idshell)
+ret = smesh.Compute(mesh,shell)
print ret
-log=mesh.GetLog(0) # no erase trace
-for linelog in log:
- print linelog
-
-
-sg.updateObjBrowser(1)
+if ret != 0:
+ log = mesh.GetLog(0) # no erase trace
+ for linelog in log:
+ print linelog
+ print "Information about the MeshBox2:"
+ print "Number of nodes : ", mesh.NbNodes()
+ print "Number of edges : ", mesh.NbEdges()
+ print "Number of faces : ", mesh.NbFaces()
+ print "Number of triangles : ", mesh.NbTriangles()
+ print "Number of volumes : ", mesh.NbVolumes()
+ print "Number of tetrahedrons: ", mesh.NbTetras()
+else:
+ print "probleme when computing the mesh"
