-// Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2020 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
-// SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses
+// SMESH SMESH_I : idl implementation based on 'SMESH' unit's classes
// File : SMESH_MeshEditor_i.hxx
// Author : Nicolas REJNERI
// Module : SMESH
*/
void ClearLastCreated() throw (SALOME::SALOME_Exception);
/*!
- * \brief Returns description of an error/warning occured during the last operation
+ * \brief Returns description of an error/warning occurred during the last operation
*/
SMESH::ComputeError* GetLastError() throw (SALOME::SALOME_Exception);
static bool IsTemporaryIDSource( SMESH::SMESH_IDSource_ptr& idSource );
static CORBA::Long* GetTemporaryIDs( SMESH::SMESH_IDSource_ptr& idSource, int& nbIds );
+ /*!
+ * \brief Generates the unique group name
+ */
+ std::string GenerateGroupName(const std::string& thePrefix);
+
CORBA::Boolean RemoveElements(const SMESH::long_array & IDsOfElements)
throw (SALOME::SALOME_Exception);
CORBA::Boolean RemoveNodes (const SMESH::long_array & IDsOfNodes)
*/
CORBA::Long AddNode(CORBA::Double x, CORBA::Double y, CORBA::Double z)
throw (SALOME::SALOME_Exception);
- CORBA::Long Add0DElement(CORBA::Long IDOfNode)
+ CORBA::Long Add0DElement(CORBA::Long IDOfNode, CORBA::Boolean DuplicateElements)
throw (SALOME::SALOME_Exception);
CORBA::Long AddBall(CORBA::Long IDOfNodem, CORBA::Double diameter)
throw (SALOME::SALOME_Exception);
* \param theObject object on whose nodes 0D elements will be created.
* \param theGroupName optional name of a group to add 0D elements created
* and/or found on nodes of \a theObject.
+ * \param theDuplicateElements to add one more 0D element to a node or not
* \return an object (a new group or a temporary SMESH_IDSource) holding
* ids of new and/or found 0D elements.
*/
SMESH::SMESH_IDSource_ptr Create0DElementsOnAllNodes(SMESH::SMESH_IDSource_ptr theObject,
- const char* theGroupName)
+ const char* theGroupName,
+ CORBA::Boolean theDuplicateElements)
throw (SALOME::SALOME_Exception);
/*!
void RenumberNodes() throw (SALOME::SALOME_Exception);
void RenumberElements() throw (SALOME::SALOME_Exception);
- SMESH::ListOfGroups* RotationSweepObjects(const SMESH::ListOfIDSources & nodes,
- const SMESH::ListOfIDSources & edges,
- const SMESH::ListOfIDSources & faces,
+ SMESH::ListOfGroups* RotationSweepObjects(const SMESH::ListOfIDSources & Nodes,
+ const SMESH::ListOfIDSources & Edges,
+ const SMESH::ListOfIDSources & Faces,
const SMESH::AxisStruct & Axis,
CORBA::Double AngleInRadians,
CORBA::Long NbOfSteps,
CORBA::Double Tolerance,
- CORBA::Boolean toMakeGroups)
+ CORBA::Boolean ToMakeGroups)
throw (SALOME::SALOME_Exception);
- SMESH::ListOfGroups* ExtrusionSweepObjects(const SMESH::ListOfIDSources & nodes,
- const SMESH::ListOfIDSources & edges,
- const SMESH::ListOfIDSources & faces,
- const SMESH::DirStruct & stepVector,
- CORBA::Long nbOfSteps,
- const SMESH::double_array & theScaleFactors,
- CORBA::Boolean theLinearVariation,
- const SMESH::double_array & theBasePoint,
- CORBA::Boolean toMakeGroups)
+ SMESH::ListOfGroups* ExtrusionSweepObjects(const SMESH::ListOfIDSources & Nodes,
+ const SMESH::ListOfIDSources & Edges,
+ const SMESH::ListOfIDSources & Faces,
+ const SMESH::DirStruct & StepVector,
+ CORBA::Long NbOfSteps,
+ CORBA::Boolean ToMakeGroups,
+ const SMESH::double_array & ScaleFactors,
+ CORBA::Boolean ScalesVariation,
+ const SMESH::double_array & BasePoint,
+ const SMESH::double_array & Angles,
+ CORBA::Boolean AnglesVariation)
throw (SALOME::SALOME_Exception);
SMESH::ListOfGroups* ExtrusionByNormal(const SMESH::ListOfIDSources& objects,
throw (SALOME::SALOME_Exception);
SMESH::ListOfGroups*
- ExtrusionAlongPathObjects(const SMESH::ListOfIDSources & nodes,
- const SMESH::ListOfIDSources & edges,
- const SMESH::ListOfIDSources & faces,
+ ExtrusionAlongPathObjects(const SMESH::ListOfIDSources & Nodes,
+ const SMESH::ListOfIDSources & Edges,
+ const SMESH::ListOfIDSources & Faces,
SMESH::SMESH_IDSource_ptr PathMesh,
GEOM::GEOM_Object_ptr PathShape,
CORBA::Long NodeStart,
CORBA::Boolean HasAngles,
const SMESH::double_array & Angles,
- CORBA::Boolean LinearVariation,
+ CORBA::Boolean AnglesVariation,
CORBA::Boolean HasRefPoint,
const SMESH::PointStruct & RefPoint,
bool MakeGroups,
+ const SMESH::double_array & ScaleFactors,
+ CORBA::Boolean ScalesVariation,
SMESH::SMESH_MeshEditor::Extrusion_Error& Error)
throw (SALOME::SALOME_Exception);
const SMESH::double_array& theScaleFact)
throw (SALOME::SALOME_Exception);
- SMESH::SMESH_Mesh_ptr ScaleMakeMesh(SMESH::SMESH_IDSource_ptr Object,
- const SMESH::PointStruct& Point,
+ SMESH::SMESH_Mesh_ptr ScaleMakeMesh(SMESH::SMESH_IDSource_ptr Object,
+ const SMESH::PointStruct& Point,
const SMESH::double_array& theScaleFact,
- CORBA::Boolean CopyGroups,
- const char* MeshName)
+ CORBA::Boolean CopyGroups,
+ const char* MeshName)
+ throw (SALOME::SALOME_Exception);
+
+ SMESH::SMESH_Mesh_ptr Offset( SMESH::SMESH_IDSource_ptr theObject,
+ CORBA::Double Value,
+ CORBA::Boolean CopyGroups,
+ CORBA::Boolean CopyElements,
+ const char* MeshName,
+ SMESH::ListOfGroups_out Groups)
throw (SALOME::SALOME_Exception);
void FindCoincidentNodes (CORBA::Double Tolerance,
SMESH::array_of_long_array_out GroupsOfNodes,
CORBA::Boolean SeparateCornersAndMedium)
throw (SALOME::SALOME_Exception);
- void FindCoincidentNodesOnPartBut(SMESH::SMESH_IDSource_ptr Object,
+ void FindCoincidentNodesOnPartBut(const SMESH::ListOfIDSources& Objects,
CORBA::Double Tolerance,
SMESH::array_of_long_array_out GroupsOfNodes,
const SMESH::ListOfIDSources& ExceptSubMeshOrGroups,
CORBA::Boolean SeparateCornersAndMedium)
throw (SALOME::SALOME_Exception);
void MergeNodes (const SMESH::array_of_long_array& GroupsOfNodes,
- const SMESH::ListOfIDSources& NodesToKeep )
+ const SMESH::ListOfIDSources& NodesToKeep,
+ CORBA::Boolean AvoidMakingHoles )
throw (SALOME::SALOME_Exception);
- void FindEqualElements(SMESH::SMESH_IDSource_ptr Object,
+ void FindEqualElements(const SMESH::ListOfIDSources& Objects,
+ const SMESH::ListOfIDSources& ExceptSubMeshOrGroups,
SMESH::array_of_long_array_out GroupsOfElementsID)
throw (SALOME::SALOME_Exception);
- void MergeElements(const SMESH::array_of_long_array& GroupsOfElementsID)
+ void MergeElements(const SMESH::array_of_long_array& GroupsOfElementsID,
+ const SMESH::ListOfIDSources& ElementsToKeep)
throw (SALOME::SALOME_Exception);
void MergeEqualElements()
throw (SALOME::SALOME_Exception);
SMESH::ElementType type)
throw (SALOME::SALOME_Exception);
/*!
- * Searching among the given elements, return elements of given type
+ * Searching among the given elements, return elements of given type
* where the given point is IN or ON.
* 'ALL' type means elements of any type excluding nodes
*/
SMESH::ElementType type)
throw (SALOME::SALOME_Exception);
+ /*!
+ * Project a point to a mesh object.
+ * Return ID of an element of given type where the given point is projected
+ * and coordinates of the projection point.
+ * In the case if nothing found, return -1 and []
+ */
+ CORBA::Long ProjectPoint(CORBA::Double x,
+ CORBA::Double y,
+ CORBA::Double z,
+ SMESH::ElementType type,
+ SMESH::SMESH_IDSource_ptr meshObject,
+ SMESH::double_array_out projecton)
+ throw (SALOME::SALOME_Exception);
+
/*!
* Return point state in a closed 2D mesh in terms of TopAbs_State enumeration.
* TopAbs_UNKNOWN state means that either mesh is wrong or the analysis fails.
CORBA::Short GetPointState(CORBA::Double x, CORBA::Double y, CORBA::Double z)
throw (SALOME::SALOME_Exception);
+ /*!
+ * Check if a 2D mesh is manifold
+ */
+ CORBA::Boolean IsManifold()
+ throw (SALOME::SALOME_Exception);
+
+ /*!
+ * Check if orientation of 2D elements is coherent
+ */
+ CORBA::Boolean IsCoherentOrientation2D()
+ throw (SALOME::SALOME_Exception);
+
+ /*!
+ * Partition given 1D elements into groups of contiguous edges.
+ * A node where number of meeting edges != 2 is a group end.
+ * An optional startNode is used to orient groups it belongs to.
+ * \return a list of edge groups and a list of corresponding node groups.
+ * If a group is closed, the first and last nodes of the group are same.
+ */
+ SMESH::array_of_long_array* Get1DBranches( SMESH::SMESH_IDSource_ptr edges,
+ CORBA::Long startNode,
+ SMESH::array_of_long_array_out nodeGroups)
+ throw (SALOME::SALOME_Exception);
+
+ /*!
+ * Return sharp edges of faces and non-manifold ones. Optionally adds existing edges.
+ */
+ SMESH::ListOfEdges* FindSharpEdges(CORBA::Double angle, CORBA::Boolean addExisting)
+ throw (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns all or only closed FreeBorder's.
+ */
+ SMESH::ListOfFreeBorders* FindFreeBorders(CORBA::Boolean closedOnly)
+ throw (SALOME::SALOME_Exception);
+
+ /*!
+ * Fill with 2D elements a hole defined by a FreeBorder.
+ * Optionally add new faces to a given group, which is returned
+ */
+ SMESH::SMESH_Group_ptr FillHole(const SMESH::FreeBorder& hole,
+ const char* groupName)
+ throw (SALOME::SALOME_Exception);
+
SMESH::CoincidentFreeBorders* FindCoincidentFreeBorders(CORBA::Double tolerance);
CORBA::Short SewCoincidentFreeBorders(const SMESH::CoincidentFreeBorders& freeBorders,
CORBA::Boolean createPolygons,
throw (SALOME::SALOME_Exception);
SMESH::SMESH_MeshEditor::Sew_Error
- SewFreeBorders(CORBA::Long FirstNodeID1,
- CORBA::Long SecondNodeID1,
- CORBA::Long LastNodeID1,
- CORBA::Long FirstNodeID2,
- CORBA::Long SecondNodeID2,
- CORBA::Long LastNodeID2,
- CORBA::Boolean CreatePolygons,
- CORBA::Boolean CreatePolyedrs) throw (SALOME::SALOME_Exception);
+ SewFreeBorders(CORBA::Long FirstNodeID1,
+ CORBA::Long SecondNodeID1,
+ CORBA::Long LastNodeID1,
+ CORBA::Long FirstNodeID2,
+ CORBA::Long SecondNodeID2,
+ CORBA::Long LastNodeID2,
+ CORBA::Boolean CreatePolygons,
+ CORBA::Boolean CreatePolyedrs) throw (SALOME::SALOME_Exception);
SMESH::SMESH_MeshEditor::Sew_Error
- SewConformFreeBorders(CORBA::Long FirstNodeID1,
- CORBA::Long SecondNodeID1,
- CORBA::Long LastNodeID1,
- CORBA::Long FirstNodeID2,
- CORBA::Long SecondNodeID2) throw (SALOME::SALOME_Exception);
+ SewConformFreeBorders(CORBA::Long FirstNodeID1,
+ CORBA::Long SecondNodeID1,
+ CORBA::Long LastNodeID1,
+ CORBA::Long FirstNodeID2,
+ CORBA::Long SecondNodeID2) throw (SALOME::SALOME_Exception);
SMESH::SMESH_MeshEditor::Sew_Error
- SewBorderToSide(CORBA::Long FirstNodeIDOnFreeBorder,
- CORBA::Long SecondNodeIDOnFreeBorder,
- CORBA::Long LastNodeIDOnFreeBorder,
- CORBA::Long FirstNodeIDOnSide,
- CORBA::Long LastNodeIDOnSide,
- CORBA::Boolean CreatePolygons,
- CORBA::Boolean CreatePolyedrs) throw (SALOME::SALOME_Exception);
+ SewBorderToSide(CORBA::Long FirstNodeIDOnFreeBorder,
+ CORBA::Long SecondNodeIDOnFreeBorder,
+ CORBA::Long LastNodeIDOnFreeBorder,
+ CORBA::Long FirstNodeIDOnSide,
+ CORBA::Long LastNodeIDOnSide,
+ CORBA::Boolean CreatePolygons,
+ CORBA::Boolean CreatePolyedrs) throw (SALOME::SALOME_Exception);
SMESH::SMESH_MeshEditor::Sew_Error
- SewSideElements(const SMESH::long_array& IDsOfSide1Elements,
- const SMESH::long_array& IDsOfSide2Elements,
- CORBA::Long NodeID1OfSide1ToMerge,
- CORBA::Long NodeID1OfSide2ToMerge,
- CORBA::Long NodeID2OfSide1ToMerge,
- CORBA::Long NodeID2OfSide2ToMerge) throw (SALOME::SALOME_Exception);
+ SewSideElements(const SMESH::long_array& IDsOfSide1Elements,
+ const SMESH::long_array& IDsOfSide2Elements,
+ CORBA::Long NodeID1OfSide1ToMerge,
+ CORBA::Long NodeID1OfSide2ToMerge,
+ CORBA::Long NodeID2OfSide1ToMerge,
+ CORBA::Long NodeID2OfSide2ToMerge) throw (SALOME::SALOME_Exception);
/*!
* Set new nodes for given element.
const char* groupName,
const SMESH::double_array& theNodesCoords,
SMESH::array_of_long_array_out GroupsOfNodes)
- throw (SALOME::SALOME_Exception);
+ throw (SALOME::SALOME_Exception);
/*!
* \brief Generated skin mesh (containing 2D cells) from 3D mesh
SMESH::SMESH_Group_out group)
throw (SALOME::SALOME_Exception);
-private: //!< private methods
+ /*!
+ * \brief Create a polyline consisting of 1D mesh elements each lying on a 2D element of
+ * the initial mesh. Positions of new nodes are found by cutting the mesh by the
+ * plane passing through pairs of points specified by each PolySegment structure.
+ * If there are several paths connecting a pair of points, the shortest path is
+ * selected by the module. Position of the cutting plane is defined by the two
+ * points and an optional vector lying on the plane specified by a PolySegment.
+ * By default the vector is defined by Mesh module as following. A middle point
+ * of the two given points is computed. The middle point is projected to the mesh.
+ * The vector goes from the middle point to the projection point. In case of planar
+ * mesh, the vector is normal to the mesh.
+ * \param [inout] segments - PolySegment's defining positions of cutting planes.
+ * Return the used vector and position of the middle point.
+ * \param [in] groupName - optional name of a group where created mesh segments will
+ * be added.
+ */
+ void MakePolyLine(SMESH::ListOfPolySegments& segments,
+ const char* groupName)
+ throw (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Create a slot of given width around given 1D elements lying on a triangle mesh.
+ * The slot is constructed by cutting faces by cylindrical surfaces made
+ * around each segment. Segments are expected to be created by MakePolyLine().
+ * \return Edges located at the slot boundary
+ */
+ SMESH::ListOfEdges* MakeSlot(SMESH::SMESH_GroupBase_ptr segments,
+ CORBA::Double width)
+ throw (SALOME::SALOME_Exception);
+
+
+ private: //!< private methods
::SMESH_MeshEditor& getEditor();
void dumpGroupsList(SMESH::TPythonDump & theDumpPython,
const SMESH::ListOfGroups * theGroupList);
- std::string generateGroupName(const std::string& thePrefix);
-
void prepareIdSource(SMESH::SMESH_IDSource_ptr theObject);
// temporary IDSources
struct _IDSource;
- // std::list< _IDSource* > myAuxIDSources;
- // void deleteAuxIDSources();
};
#endif
