+ }
+ return false;
+}
+
+//================================================================================
+/*!
+ * \brief Convert the command adding a hypothesis to mesh into a smesh command
+ * \param theCmd - The command like mesh.AddHypothesis( geom, hypo )
+ * \param theAlgo - The algo that can create this hypo
+ * \retval bool - false if the command cant be converted
+ */
+//================================================================================
+
+bool _pyHypothesis::Addition2Creation( const Handle(_pyCommand)& theCmd,
+ const _pyID& theMesh)
+{
+ ASSERT(( theCmd->GetMethod() == "AddHypothesis" ));
+
+ if ( !IsWrappable( theMesh ))
+ return false;
+
+ myGeom = theCmd->GetArg( 1 );
+
+ Handle(_pyHypothesis) algo;
+ if ( !IsAlgo() ) {
+ // find algo created on myGeom in theMesh
+ algo = theGen->FindAlgo( myGeom, theMesh, this );
+ if ( algo.IsNull() )
+ return false;
+ // attach hypothesis creation command to be after algo creation command
+ // because it can be new created instance of algorithm
+ algo->GetCreationCmd()->AddDependantCmd( theCmd );
+ }
+ myIsWrapped = true;
+
+ // mesh.AddHypothesis(geom,hyp) --> hyp = <theMesh or algo>.myCreationMethod(args)
+ theCmd->SetResultValue( GetID() );
+ theCmd->SetObject( IsAlgo() ? theMesh : algo->GetID());
+ theCmd->SetMethod( IsAlgo() ? GetAlgoCreationMethod() : GetCreationMethod( algo->GetAlgoType() ));
+ // set args (geom will be set by _pyMesh calling this method)
+ theCmd->RemoveArgs();
+ for ( size_t i = 0; i < myCurCrMethod->myArgs.size(); ++i ) {
+ if ( !myCurCrMethod->myArgs[ i ].IsEmpty() )
+ theCmd->SetArg( i+1, myCurCrMethod->myArgs[ i ]);
+ else
+ theCmd->SetArg( i+1, "[]");
+ }
+ // set a new creation command
+ GetCreationCmd()->Clear();
+ // replace creation command by wrapped instance
+ // please note, that hypothesis attaches to algo creation command (see upper)
+ SetCreationCmd( theCmd );
+
+
+ // clear commands setting arg values
+ list < Handle(_pyCommand) >::iterator argCmd = myArgCommands.begin();
+ for ( ; argCmd != myArgCommands.end(); ++argCmd )
+ (*argCmd)->Clear();
+
+ // set unknown arg commands after hypo creation
+ Handle(_pyCommand) afterCmd = myIsWrapped ? theCmd : GetCreationCmd();
+ list<Handle(_pyCommand)>::iterator cmd = myUnusedCommands.begin();
+ for ( ; cmd != myUnusedCommands.end(); ++cmd ) {
+ afterCmd->AddDependantCmd( *cmd );
+ }
+
+ return myIsWrapped;
+}
+
+//================================================================================
+/*!
+ * \brief Remember hypothesis parameter values
+ * \param theCommand - The called hypothesis method
+ */
+//================================================================================
+
+void _pyHypothesis::Process( const Handle(_pyCommand)& theCommand)
+{
+ ASSERT( !myIsAlgo );
+ if ( !theGen->IsToKeepAllCommands() )
+ rememberCmdOfParameter( theCommand );
+ // set args
+ bool usedCommand = false;
+ TType2CrMethod::iterator type2meth = myAlgoType2CreationMethod.begin();
+ for ( ; type2meth != myAlgoType2CreationMethod.end(); ++type2meth )
+ {
+ CreationMethod& crMethod = type2meth->second;
+ for ( size_t i = 0; i < crMethod.myArgMethods.size(); ++i ) {
+ if ( crMethod.myArgMethods[ i ] == theCommand->GetMethod() ) {
+ if ( !usedCommand )
+ myArgCommands.push_back( theCommand );
+ usedCommand = true;
+ while ( crMethod.myArgs.size() < i+1 )
+ crMethod.myArgs.push_back( "[]" );
+ crMethod.myArgs[ i ] = theCommand->GetArg( crMethod.myArgNb[i] );
+ }
+ }
+ }
+ if ( !usedCommand )
+ myUnusedCommands.push_back( theCommand );
+}
+
+//================================================================================
+/*!
+ * \brief Finish conversion
+ */
+//================================================================================
+
+void _pyHypothesis::Flush()
+{
+ if ( !IsAlgo() )
+ {
+ list < Handle(_pyCommand) >::iterator cmd = myArgCommands.begin();
+ for ( ; cmd != myArgCommands.end(); ++cmd ) {
+ // Add access to a wrapped mesh
+ theGen->AddMeshAccessorMethod( *cmd );
+ // Add access to a wrapped algorithm
+ theGen->AddAlgoAccessorMethod( *cmd );
+ }
+ cmd = myUnusedCommands.begin();
+ for ( ; cmd != myUnusedCommands.end(); ++cmd ) {
+ // Add access to a wrapped mesh
+ theGen->AddMeshAccessorMethod( *cmd );
+ // Add access to a wrapped algorithm
+ theGen->AddAlgoAccessorMethod( *cmd );
+ }
+ }
+ // forget previous hypothesis modifications
+ myArgCommands.clear();
+ myUnusedCommands.clear();
+}
+
+//================================================================================
+/*!
+ * \brief clear creation, arg and unkown commands
+ */
+//================================================================================
+
+void _pyHypothesis::ClearAllCommands()
+{
+ GetCreationCmd()->Clear();
+ list<Handle(_pyCommand)>::iterator cmd = myArgCommands.begin();
+ for ( ; cmd != myArgCommands.end(); ++cmd )
+ ( *cmd )->Clear();
+ cmd = myUnusedCommands.begin();
+ for ( ; cmd != myUnusedCommands.end(); ++cmd )
+ ( *cmd )->Clear();
+}
+
+
+//================================================================================
+/*!
+ * \brief Assign fields of theOther to me except myIsWrapped
+ */
+//================================================================================
+
+void _pyHypothesis::Assign( const Handle(_pyHypothesis)& theOther,
+ const _pyID& theMesh )
+{
+ // myCreationCmd = theOther->myCreationCmd;
+ myIsAlgo = theOther->myIsAlgo;
+ myIsWrapped = false;
+ myGeom = theOther->myGeom;
+ myMesh = theMesh;
+ myAlgoType2CreationMethod = theOther->myAlgoType2CreationMethod;
+ myAccumulativeMethods = theOther->myAccumulativeMethods;
+ //myUnusedCommands = theOther->myUnusedCommands;
+ // init myCurCrMethod
+ GetCreationMethod( theOther->GetAlgoType() );
+}
+
+//================================================================================
+/*!
+ * \brief Analyze my erasability depending on myReferredObjs
+ */
+//================================================================================
+
+bool _pyHypothesis::CanClear()
+{
+ if ( IsInStudy() )
+ {
+ list< Handle(_pyObject) >::iterator obj = myReferredObjs.begin();
+ for ( ; obj != myReferredObjs.end(); ++obj )
+ if ( (*obj)->CanClear() )
+ return true;
+ return false;
+ }
+ return true;
+}
+
+//================================================================================
+/*!
+ * \brief Clear my commands depending on usage by meshes
+ */
+//================================================================================
+
+void _pyHypothesis::ClearCommands()
+{
+ // if ( !theGen->IsToKeepAllCommands() )
+ // {
+ // bool isUsed = false;
+ // int lastComputeOrder = 0;
+ // list<Handle(_pyCommand) >::iterator cmd = myComputeCmds.begin();
+ // for ( ; cmd != myComputeCmds.end(); ++cmd )
+ // if ( ! (*cmd)->IsEmpty() )
+ // {
+ // isUsed = true;
+ // if ( (*cmd)->GetOrderNb() > lastComputeOrder )
+ // lastComputeOrder = (*cmd)->GetOrderNb();
+ // }
+ // if ( !isUsed )
+ // {
+ // SetRemovedFromStudy( true );
+ // }
+ // else
+ // {
+ // // clear my commands invoked after lastComputeOrder
+ // // map<TCollection_AsciiString, list< Handle(_pyCommand) > >::iterator m2c;
+ // // for ( m2c = myMeth2Commands.begin(); m2c != myMeth2Commands.end(); ++m2c )
+ // // {
+ // // list< Handle(_pyCommand)> & cmds = m2c->second;
+ // // if ( !cmds.empty() && cmds.back()->GetOrderNb() > lastComputeOrder )
+ // // cmds.back()->Clear();
+ // // }
+ // }
+ // }
+ _pyObject::ClearCommands();
+}
+
+//================================================================================
+/*!
+ * \brief Find arguments that are objects like mesh, group, geometry
+ * \param meshes - referred meshes (directly or indirrectly)
+ * \retval bool - false if a referred geometry is not in the study
+ */
+//================================================================================
+
+bool _pyHypothesis::GetReferredMeshesAndGeom( list< Handle(_pyMesh) >& meshes )
+{
+ if ( IsAlgo() ) return true;
+
+ bool geomPublished = true;
+ vector< _AString > args;
+ TType2CrMethod::iterator type2meth = myAlgoType2CreationMethod.begin();
+ for ( ; type2meth != myAlgoType2CreationMethod.end(); ++type2meth )
+ {
+ CreationMethod& crMethod = type2meth->second;
+ args.insert( args.end(), crMethod.myArgs.begin(), crMethod.myArgs.end());
+ }
+ list<Handle(_pyCommand)>::iterator cmd = myUnusedCommands.begin();
+ for ( ; cmd != myUnusedCommands.end(); ++cmd ) {
+ for ( int nb = (*cmd)->GetNbArgs(); nb; --nb )
+ args.push_back( (*cmd)->GetArg( nb ));
+ }
+
+ for ( size_t i = 0; i < args.size(); ++i )
+ {
+ list< _pyID > idList = _pyCommand::GetStudyEntries( args[ i ]);
+ if ( idList.empty() && !args[ i ].IsEmpty() )
+ idList.push_back( args[ i ]);
+ list< _pyID >::iterator id = idList.begin();
+ for ( ; id != idList.end(); ++id )
+ {
+ Handle(_pyObject) obj = theGen->FindObject( *id );
+ if ( obj.IsNull() ) obj = theGen->FindHyp( *id );
+ if ( obj.IsNull() )
+ {
+ if ( theGen->IsGeomObject( *id ) && theGen->IsNotPublished( *id ))
+ geomPublished = false;
+ }
+ else
+ {
+ myReferredObjs.push_back( obj );
+ Handle(_pyMesh) mesh = ObjectToMesh( obj );
+ if ( !mesh.IsNull() )
+ meshes.push_back( mesh );
+ // prevent clearing not published hyps referred e.g. by "LayerDistribution"
+ else if ( obj->IsKind( STANDARD_TYPE( _pyHypothesis )) && this->IsInStudy() )
+ obj->SetRemovedFromStudy( false );
+ }
+ }
+ }
+ return geomPublished;
+}
+
+//================================================================================
+/*!
+ * \brief Remember theCommand setting a parameter
+ */
+//================================================================================
+
+void _pyHypothesis::rememberCmdOfParameter( const Handle(_pyCommand) & theCommand )
+{
+ // parameters are discriminated by method name
+ _AString method = theCommand->GetMethod();
+ if ( myAccumulativeMethods.count( method ))
+ return; // this method adds values and not override the previus value
+
+ // discriminate commands setting different parameters via one method
+ // by passing parameter names like e.g. SetOption("size", "0.2")
+ if ( theCommand->GetString().FirstLocationInSet( "'\"", 1, theCommand->Length() ) &&
+ theCommand->GetNbArgs() > 1 )
+ {
+ // mangle method by appending a 1st textual arg
+ for ( int iArg = 1; iArg <= theCommand->GetNbArgs(); ++iArg )
+ {
+ const TCollection_AsciiString& arg = theCommand->GetArg( iArg );
+ if ( arg.Value(1) != '\"' && arg.Value(1) != '\'' ) continue;
+ if ( !isalpha( arg.Value(2))) continue;
+ method += arg;
+ break;
+ }
+ }
+ // parameters are discriminated by method name
+ list< Handle(_pyCommand)>& cmds = myMeth2Commands[ method /*theCommand->GetMethod()*/ ];
+ if ( !cmds.empty() && !isCmdUsedForCompute( cmds.back() ))
+ {
+ cmds.back()->Clear(); // previous parameter value has not been used
+ cmds.back() = theCommand;
+ }
+ else
+ {
+ cmds.push_back( theCommand );
+ }
+}
+
+//================================================================================
+/*!
+ * \brief Return true if a setting parameter command ha been used to compute mesh
+ */
+//================================================================================
+
+bool _pyHypothesis::isCmdUsedForCompute( const Handle(_pyCommand) & cmd,
+ _pyCommand::TAddr avoidComputeAddr ) const
+{
+ bool isUsed = false;
+ map< _pyCommand::TAddr, list<Handle(_pyCommand) > >::const_iterator addr2cmds =
+ myComputeAddr2Cmds.begin();
+ for ( ; addr2cmds != myComputeAddr2Cmds.end() && !isUsed; ++addr2cmds )
+ {
+ if ( addr2cmds->first == avoidComputeAddr ) continue;
+ const list<Handle(_pyCommand)> & cmds = addr2cmds->second;
+ isUsed = ( std::find( cmds.begin(), cmds.end(), cmd ) != cmds.end() );
+ }
+ return isUsed;
+}
+
+//================================================================================
+/*!
+ * \brief Save commands setting parameters as they are used for a mesh computation
+ */
+//================================================================================
+
+void _pyHypothesis::MeshComputed( const Handle(_pyCommand)& theComputeCmd )
+{
+ myComputeCmds.push_back( theComputeCmd );
+ list<Handle(_pyCommand)>& savedCmds = myComputeAddr2Cmds[ theComputeCmd->GetAddress() ];
+
+ map<TCollection_AsciiString, list< Handle(_pyCommand) > >::iterator m2c;
+ for ( m2c = myMeth2Commands.begin(); m2c != myMeth2Commands.end(); ++m2c )
+ savedCmds.push_back( m2c->second.back() );
+}
+
+//================================================================================
+/*!
+ * \brief Clear commands setting parameters as a mesh computed using them is cleared
+ */
+//================================================================================
+
+void _pyHypothesis::ComputeDiscarded( const Handle(_pyCommand)& theComputeCmd )
+{
+ list<Handle(_pyCommand)>& savedCmds = myComputeAddr2Cmds[ theComputeCmd->GetAddress() ];
+
+ list<Handle(_pyCommand)>::iterator cmd = savedCmds.begin();
+ for ( ; cmd != savedCmds.end(); ++cmd )
+ {
+ // check if a cmd has been used to compute another mesh
+ if ( isCmdUsedForCompute( *cmd, theComputeCmd->GetAddress() ))
+ continue;
+ // check if a cmd is a sole command setting its parameter;
+ // don't use method name for search as it can change
+ map<TCollection_AsciiString, list<Handle(_pyCommand)> >::iterator
+ m2cmds = myMeth2Commands.begin();
+ for ( ; m2cmds != myMeth2Commands.end(); ++m2cmds )
+ {
+ list< Handle(_pyCommand)>& cmds = m2cmds->second;
+ list< Handle(_pyCommand)>::iterator cmdIt = std::find( cmds.begin(), cmds.end(), *cmd );
+ if ( cmdIt != cmds.end() )
+ {
+ if ( cmds.back() != *cmd )
+ {
+ cmds.erase( cmdIt );
+ (*cmd)->Clear();
+ }
+ break;
+ }
+ }
+ }
+ myComputeAddr2Cmds.erase( theComputeCmd->GetAddress() );
+}
+
+//================================================================================
+/*!
+ * \brief Sets an argNb-th argument of current creation command
+ * \param argNb - argument index countered from 1
+ */
+//================================================================================
+
+void _pyHypothesis::setCreationArg( const int argNb, const _AString& arg )
+{
+ if ( myCurCrMethod )
+ {
+ while ( myCurCrMethod->myArgs.size() < argNb )
+ myCurCrMethod->myArgs.push_back( "None" );
+ if ( arg.IsEmpty() )
+ myCurCrMethod->myArgs[ argNb-1 ] = "None";
+ else
+ myCurCrMethod->myArgs[ argNb-1 ] = arg;
+ }
+}
+
+
+//================================================================================
+/*!
+ * \brief Remember hypothesis parameter values
+ * \param theCommand - The called hypothesis method
+ */
+//================================================================================
+
+void _pyComplexParamHypo::Process( const Handle(_pyCommand)& theCommand)
+{
+ if ( GetAlgoType() == "Cartesian_3D" )
+ {
+ // CartesianParameters3D hyp
+
+ if ( theCommand->GetMethod() == "SetSizeThreshold" )
+ {
+ setCreationArg( 4, theCommand->GetArg( 1 ));
+ myArgCommands.push_back( theCommand );
+ return;
+ }
+ if ( theCommand->GetMethod() == "SetGrid" ||
+ theCommand->GetMethod() == "SetGridSpacing" )
+ {
+ TCollection_AsciiString axis = theCommand->GetArg( theCommand->GetNbArgs() );
+ int iArg = axis.Value(1) - '0';
+ if ( theCommand->GetMethod() == "SetGrid" )
+ {
+ setCreationArg( 1+iArg, theCommand->GetArg( 1 ));
+ }
+ else
+ {
+ myCurCrMethod->myArgs[ iArg ] = "[ ";
+ myCurCrMethod->myArgs[ iArg ] += theCommand->GetArg( 1 );
+ myCurCrMethod->myArgs[ iArg ] += ", ";
+ myCurCrMethod->myArgs[ iArg ] += theCommand->GetArg( 2 );
+ myCurCrMethod->myArgs[ iArg ] += "]";
+ }
+ myArgCommands.push_back( theCommand );
+ rememberCmdOfParameter( theCommand );
+ return;
+ }
+ }
+
+ if( theCommand->GetMethod() == "SetLength" )
+ {
+ // NOW it is OBSOLETE
+ // ex: hyp.SetLength(start, 1)
+ // hyp.SetLength(end, 0)
+ ASSERT(( theCommand->GetArg( 2 ).IsIntegerValue() ));
+ int i = 1 - theCommand->GetArg( 2 ).IntegerValue();
+ TType2CrMethod::iterator type2meth = myAlgoType2CreationMethod.begin();
+ for ( ; type2meth != myAlgoType2CreationMethod.end(); ++type2meth )
+ {
+ CreationMethod& crMethod = type2meth->second;
+ while ( crMethod.myArgs.size() < i+1 )
+ crMethod.myArgs.push_back( "[]" );
+ crMethod.myArgs[ i ] = theCommand->GetArg( 1 ); // arg value
+ }
+ myArgCommands.push_back( theCommand );
+ }
+ else
+ {
+ _pyHypothesis::Process( theCommand );
+ }
+}
+//================================================================================
+/*!
+ * \brief Clear SetObjectEntry() as it is called by methods of Mesh_Segment
+ */
+//================================================================================
+
+void _pyComplexParamHypo::Flush()
+{
+ if ( IsWrapped() )
+ {
+ list < Handle(_pyCommand) >::iterator cmd = myUnusedCommands.begin();
+ for ( ; cmd != myUnusedCommands.end(); ++cmd )
+ if ((*cmd)->GetMethod() == "SetObjectEntry" )
+ (*cmd)->Clear();
+ }
+}
+
+//================================================================================
+/*!
+ * \brief Convert methods of 1D hypotheses to my own methods
+ * \param theCommand - The called hypothesis method
+ */
+//================================================================================
+
+void _pyLayerDistributionHypo::Process( const Handle(_pyCommand)& theCommand)
+{
+ if ( theCommand->GetMethod() != "SetLayerDistribution" )
+ return;
+
+ const _pyID& hyp1dID = theCommand->GetArg( 1 );
+ // Handle(_pyHypothesis) hyp1d = theGen->FindHyp( hyp1dID );
+ // if ( hyp1d.IsNull() && ! my1dHyp.IsNull()) // apparently hypId changed at study restoration
+ // {
+ // TCollection_AsciiString cmd =
+ // my1dHyp->GetCreationCmd()->GetIndentation() + hyp1dID + " = " + my1dHyp->GetID();
+ // Handle(_pyCommand) newCmd = theGen->AddCommand( cmd );
+ // theGen->SetCommandAfter( newCmd, my1dHyp->GetCreationCmd() );
+ // hyp1d = my1dHyp;
+ // }
+ // else if ( !my1dHyp.IsNull() && hyp1dID != my1dHyp->GetID() )
+ // {
+ // // 1D hypo is already set, so distribution changes and the old
+ // // 1D hypo is thrown away
+ // my1dHyp->ClearAllCommands();
+ // }
+ // my1dHyp = hyp1d;
+ // //my1dHyp->SetRemovedFromStudy( false );
+
+ // if ( !myArgCommands.empty() )
+ // myArgCommands.back()->Clear();
+ myCurCrMethod->myArgs.push_back( hyp1dID );
+ myArgCommands.push_back( theCommand );
+}
+
+//================================================================================
+/*!
+ * \brief
+ * \param theAdditionCmd - command to be converted
+ * \param theMesh - mesh instance
+ * \retval bool - status
+ */
+//================================================================================
+
+bool _pyLayerDistributionHypo::Addition2Creation( const Handle(_pyCommand)& theAdditionCmd,
+ const _pyID& theMesh)
+{
+ myIsWrapped = false;
+
+ if ( my1dHyp.IsNull() )
+ return false;
+
+ // set "SetLayerDistribution()" after addition cmd
+ theAdditionCmd->AddDependantCmd( myArgCommands.front() );
+
+ _pyID geom = theAdditionCmd->GetArg( 1 );
+
+ Handle(_pyHypothesis) algo = theGen->FindAlgo( geom, theMesh, this );
+ if ( !algo.IsNull() )
+ {
+ my1dHyp->SetMesh( theMesh );
+ my1dHyp->SetConvMethodAndType(my1dHyp->GetAlgoCreationMethod().ToCString(),
+ algo->GetAlgoType().ToCString());
+ if ( !my1dHyp->Addition2Creation( theAdditionCmd, theMesh ))
+ return false;
+
+ // clear "SetLayerDistribution()" cmd
+ myArgCommands.back()->Clear();
+
+ // Convert my creation => me = RadialPrismAlgo.Get3DHypothesis()
+
+ // find RadialPrism algo created on <geom> for theMesh
+ GetCreationCmd()->SetObject( algo->GetID() );
+ GetCreationCmd()->SetMethod( myAlgoMethod );
+ GetCreationCmd()->RemoveArgs();
+ theAdditionCmd->AddDependantCmd( GetCreationCmd() );
+ myIsWrapped = true;
+ }
+ return myIsWrapped;
+}
+
+//================================================================================
+/*!
+ * \brief
+ */
+//================================================================================
+
+void _pyLayerDistributionHypo::Flush()
+{
+ // as creation of 1D hyp was written later then it's edition,
+ // we need to find all it's edition calls and process them
+ list< Handle(_pyCommand) >::iterator cmd = myArgCommands.begin();
+ _pyID prevNewName;
+ for ( cmd = myArgCommands.begin(); cmd != myArgCommands.end(); ++cmd )
+ {
+ const _pyID& hyp1dID = (*cmd)->GetArg( 1 );
+ if ( hyp1dID.IsEmpty() ) continue;
+
+ Handle(_pyHypothesis) hyp1d = theGen->FindHyp( hyp1dID );
+
+ // make a new name for 1D hyp = "HypType" + "_Distribution"
+ _pyID newName;
+ if ( hyp1d.IsNull() ) // apparently hypId changed at study restoration
+ {
+ if ( prevNewName.IsEmpty() ) continue;
+ newName = prevNewName;
+ }
+ else
+ {
+ if ( hyp1d->IsWrapped() ) {
+ newName = hyp1d->GetCreationCmd()->GetMethod();
+ }
+ else {
+ TCollection_AsciiString hypTypeQuoted = hyp1d->GetCreationCmd()->GetArg(1);
+ newName = hypTypeQuoted.SubString( 2, hypTypeQuoted.Length() - 1 );
+ }
+ newName += "_Distribution";
+ prevNewName = newName;
+
+ hyp1d->GetCreationCmd()->SetResultValue( newName );
+ }
+ list< Handle(_pyCommand) >& cmds = theGen->GetCommands();
+ list< Handle(_pyCommand) >::iterator cmdIt = cmds.begin();
+ for ( ; cmdIt != cmds.end(); ++cmdIt ) {
+ const _pyID& objID = (*cmdIt)->GetObject();
+ if ( objID == hyp1dID ) {
+ if ( !hyp1d.IsNull() )
+ {
+ hyp1d->Process( *cmdIt );
+ hyp1d->GetCreationCmd()->AddDependantCmd( *cmdIt );
+ }
+ ( *cmdIt )->SetObject( newName );
+ }
+ }
+ // Set new hyp name to SetLayerDistribution(hyp1dID) cmd
+ (*cmd)->SetArg( 1, newName );
+ }
+}
+
+//================================================================================
+/*!
+ * \brief additionally to Addition2Creation, clears SetDistrType() command
+ * \param theCmd - AddHypothesis() command
+ * \param theMesh - mesh to which a hypothesis is added
+ * \retval bool - convertion result
+ */
+//================================================================================
+
+bool _pyNumberOfSegmentsHyp::Addition2Creation( const Handle(_pyCommand)& theCmd,
+ const _pyID& theMesh)
+{
+ if ( IsWrappable( theMesh ) && myCurCrMethod->myArgs.size() > 1 ) {
+ // scale factor (2-nd arg) is provided: clear SetDistrType(1) command
+ bool scaleDistrType = false;
+ list<Handle(_pyCommand)>::reverse_iterator cmd = myUnusedCommands.rbegin();
+ for ( ; cmd != myUnusedCommands.rend(); ++cmd ) {
+ if ( (*cmd)->GetMethod() == "SetDistrType" ) {
+ if ( (*cmd)->GetArg( 1 ) == "1" ) {
+ scaleDistrType = true;
+ (*cmd)->Clear();
+ }
+ else if ( !scaleDistrType ) {
+ // distribution type changed: remove scale factor from args
+ TType2CrMethod::iterator type2meth = myAlgoType2CreationMethod.begin();
+ for ( ; type2meth != myAlgoType2CreationMethod.end(); ++type2meth )
+ {
+ CreationMethod& crMethod = type2meth->second;
+ if ( crMethod.myArgs.size() == 2 )
+ crMethod.myArgs.pop_back();
+ }
+ break;
+ }
+ }
+ }
+ }
+ return _pyHypothesis::Addition2Creation( theCmd, theMesh );
+}
+
+//================================================================================
+/*!
+ * \brief remove repeated commands defining distribution
+ */
+//================================================================================
+
+void _pyNumberOfSegmentsHyp::Flush()
+{
+ // find number of the last SetDistrType() command
+ list<Handle(_pyCommand)>::reverse_iterator cmd = myUnusedCommands.rbegin();
+ int distrTypeNb = 0;
+ for ( ; !distrTypeNb && cmd != myUnusedCommands.rend(); ++cmd )
+ if ( (*cmd)->GetMethod() == "SetDistrType" ) {
+ if ( cmd != myUnusedCommands.rbegin() )
+ distrTypeNb = (*cmd)->GetOrderNb();
+ }
+ else if (IsWrapped() && (*cmd)->GetMethod() == "SetObjectEntry" ) {
+ (*cmd)->Clear();
+ }
+ // clear commands before the last SetDistrType()
+ list<Handle(_pyCommand)> * cmds[2] = { &myArgCommands, &myUnusedCommands };
+ set< int > treatedCmdNbs; // avoid treating same cmd twice
+ for ( int i = 0; i < 2; ++i ) {
+ set<TCollection_AsciiString> uniqueMethods;
+ list<Handle(_pyCommand)> & cmdList = *cmds[i];
+ for ( cmd = cmdList.rbegin(); cmd != cmdList.rend(); ++cmd )
+ {
+ if ( !treatedCmdNbs.insert( (*cmd)->GetOrderNb() ).second )
+ continue;// avoid treating same cmd twice
+ bool clear = ( (*cmd)->GetOrderNb() < distrTypeNb );
+ const TCollection_AsciiString& method = (*cmd)->GetMethod();
+ if ( !clear || method == "SetNumberOfSegments" ) {
+ bool isNewInSet = uniqueMethods.insert( method ).second;
+ clear = !isNewInSet;
+ }
+ if ( clear )
+ (*cmd)->Clear();
+ }
+ cmdList.clear();
+ }
+}
+
+//================================================================================
+/*!
+ * \brief Convert the command adding "SegmentLengthAroundVertex" to mesh
+ * into regular1D.LengthNearVertex( length, vertex )
+ * \param theCmd - The command like mesh.AddHypothesis( vertex, SegmentLengthAroundVertex )
+ * \param theMesh - The mesh needing this hypo
+ * \retval bool - false if the command cant be converted
+ */
+//================================================================================
+
+bool _pySegmentLengthAroundVertexHyp::Addition2Creation( const Handle(_pyCommand)& theCmd,
+ const _pyID& theMeshID)
+{
+ if ( IsWrappable( theMeshID )) {
+
+ _pyID vertex = theCmd->GetArg( 1 );
+
+ // the problem here is that segment algo will not be found
+ // by pyHypothesis::Addition2Creation() for <vertex>, so we try to find
+ // geometry where segment algorithm is assigned
+ Handle(_pyHypothesis) algo;
+ _pyID geom = vertex;
+ while ( algo.IsNull() && !geom.IsEmpty()) {
+ // try to find geom as a father of <vertex>
+ geom = FatherID( geom );
+ algo = theGen->FindAlgo( geom, theMeshID, this );
+ }
+ if ( algo.IsNull() )
+ return false; // also possible to find geom as brother of veretex...
+ // set geom instead of vertex
+ theCmd->SetArg( 1, geom );
+
+ // set vertex as a second arg
+ if ( myCurCrMethod->myArgs.size() < 1) setCreationArg( 1, "1" ); // :(
+ setCreationArg( 2, vertex );
+
+ // mesh.AddHypothesis(vertex, SegmentLengthAroundVertex) -->
+ // theMeshID.LengthNearVertex( length, vertex )
+ return _pyHypothesis::Addition2Creation( theCmd, theMeshID );
+ }
+ return false;
+}
+
+//================================================================================
+/*!
+ * \brief _pyAlgorithm constructor
+ * \param theCreationCmd - The command like "algo = smeshgen.CreateHypothesis(type,lib)"
+ */
+//================================================================================
+
+_pyAlgorithm::_pyAlgorithm(const Handle(_pyCommand)& theCreationCmd)
+ : _pyHypothesis( theCreationCmd )
+{
+ myIsAlgo = true;
+}
+
+//================================================================================
+/*!
+ * \brief Convert the command adding an algorithm to mesh
+ * \param theCmd - The command like mesh.AddHypothesis( geom, algo )
+ * \param theMesh - The mesh needing this algo
+ * \retval bool - false if the command cant be converted
+ */
+//================================================================================
+
+bool _pyAlgorithm::Addition2Creation( const Handle(_pyCommand)& theCmd,
+ const _pyID& theMeshID)
+{
+ // mesh.AddHypothesis(geom,algo) --> theMeshID.myCreationMethod()
+ if ( _pyHypothesis::Addition2Creation( theCmd, theMeshID )) {
+ theGen->SetAccessorMethod( GetID(), "GetAlgorithm()" );
+ return true;
+ }
+ return false;
+}
+
+//================================================================================
+/*!
+ * \brief Return starting position of a part of python command
+ * \param thePartIndex - The index of command part
+ * \retval int - Part position
+ */
+//================================================================================
+
+int _pyCommand::GetBegPos( int thePartIndex ) const
+{
+ if ( IsEmpty() )
+ return EMPTY;
+ if ( myBegPos.Length() < thePartIndex )
+ return UNKNOWN;
+ ASSERT( thePartIndex > 0 );
+ return myBegPos( thePartIndex );
+}
+
+//================================================================================
+/*!
+ * \brief Store starting position of a part of python command
+ * \param thePartIndex - The index of command part
+ * \param thePosition - Part position
+ */
+//================================================================================
+
+void _pyCommand::SetBegPos( int thePartIndex, int thePosition )
+{
+ while ( myBegPos.Length() < thePartIndex )
+ myBegPos.Append( UNKNOWN );
+ ASSERT( thePartIndex > 0 );
+ myBegPos( thePartIndex ) = thePosition;
+}
+
+//================================================================================
+/*!
+ * \brief Returns whitespace symbols at the line beginning
+ * \retval TCollection_AsciiString - result
+ */
+//================================================================================
+
+TCollection_AsciiString _pyCommand::GetIndentation()
+{
+ int end = 1;
+ if ( GetBegPos( RESULT_IND ) == UNKNOWN )
+ GetWord( myString, end, true );
+ else
+ end = GetBegPos( RESULT_IND );
+ return myString.SubString( 1, Max( end - 1, 1 ));
+}
+
+//================================================================================
+/*!
+ * \brief Return substring of python command looking like ResultValue = Obj.Meth()
+ * \retval const TCollection_AsciiString & - ResultValue substring
+ */
+//================================================================================
+
+const TCollection_AsciiString & _pyCommand::GetResultValue()
+{
+ if ( GetBegPos( RESULT_IND ) == UNKNOWN )
+ {
+ SetBegPos( RESULT_IND, EMPTY );
+ int begPos, endPos = myString.Location( "=", 1, Length() );
+ if ( endPos )
+ {
+ begPos = 1;
+ while ( begPos < endPos && isspace( myString.Value( begPos ))) ++begPos;
+ if ( begPos < endPos )
+ {
+ SetBegPos( RESULT_IND, begPos );
+ --endPos;
+ while ( begPos < endPos && isspace( myString.Value( endPos ))) --endPos;
+ myRes = myString.SubString( begPos, endPos );
+ }
+ }
+ }
+ return myRes;
+}
+
+//================================================================================
+/*!
+ * \brief Return number of python command result value ResultValue = Obj.Meth()
+ */
+//================================================================================
+
+int _pyCommand::GetNbResultValues()
+{
+ GetResultValue(1);
+ return myResults.Length();
+}
+
+
+//================================================================================
+/*!
+ * \brief Return substring of python command looking like
+ * ResultValue1 , ResultValue2,... = Obj.Meth() with res index
+ * \retval const TCollection_AsciiString & - ResultValue with res index substring
+ */
+//================================================================================
+const _AString& _pyCommand::GetResultValue(int res)
+{
+ if ( GetResultValue().IsEmpty() )
+ return theEmptyString;
+
+ if ( myResults.IsEmpty() )
+ {
+ int begPos = 1;
+ if ( SkipSpaces( myRes, begPos ) && myRes.Value( begPos ) == '[' )
+ ++begPos; // skip [, else the whole list is returned
+ while ( begPos < myRes.Length() ) {
+ _AString result = GetWord( myRes, begPos, true );
+ begPos += result.Length();
+ // if(res == Nb) {
+ // result.RemoveAll('[');
+ // result.RemoveAll(']');
+ // return result;
+ // }
+ // if(Nb>res)
+ // break;
+ myResults.Append( result );
+ }
+ }
+ if ( res > 0 && res <= myResults.Length() )
+ return myResults( res );
+ return theEmptyString;
+}
+
+//================================================================================
+/*!
+ * \brief Return substring of python command looking like ResVal = Object.Meth()
+ * \retval const TCollection_AsciiString & - Object substring
+ */
+//================================================================================
+
+const TCollection_AsciiString & _pyCommand::GetObject()
+{
+ if ( GetBegPos( OBJECT_IND ) == UNKNOWN )
+ {
+ // beginning
+ int begPos = GetBegPos( RESULT_IND );
+ if ( begPos < 1 ) {
+ begPos = myString.Location( "=", 1, Length() ) + 1;
+ // is '=' in the string argument (for example, name) or not
+ int nb1 = 0; // number of ' character at the left of =
+ int nb2 = 0; // number of " character at the left of =
+ for ( int i = 1; i < begPos-1; i++ ) {
+ if ( myString.Value( i )=='\'' )
+ nb1 += 1;
+ else if ( myString.Value( i )=='"' )
+ nb2 += 1;
+ }
+ // if number of ' or " is not divisible by 2,
+ // then get an object at the start of the command
+ if ( nb1 % 2 != 0 || nb2 % 2 != 0 )
+ begPos = 1;
+ }
+ else {
+ begPos += myRes.Length();
+ }
+ myObj = GetWord( myString, begPos, true );
+ if ( begPos != EMPTY )
+ {
+ // check if object is complex,
+ // so far consider case like "smesh.Method()"
+ if ( int bracketPos = myString.Location( "(", begPos, Length() )) {
+ //if ( bracketPos==0 ) bracketPos = Length();
+ int dotPos = begPos+myObj.Length();
+ while ( dotPos+1 < bracketPos ) {
+ if ( int pos = myString.Location( ".", dotPos+1, bracketPos ))
+ dotPos = pos;
+ else
+ break;
+ }
+ if ( dotPos > begPos+myObj.Length() )
+ myObj = myString.SubString( begPos, dotPos-1 );
+ }
+ }
+ // 1st word after '=' is an object
+ // else // no method -> no object
+ // {
+ // myObj.Clear();
+ // begPos = EMPTY;
+ // }
+ // store
+ SetBegPos( OBJECT_IND, begPos );
+ }
+ //SCRUTE(myObj);
+ return myObj;
+}
+
+//================================================================================
+/*!
+ * \brief Return substring of python command looking like ResVal = Obj.Method()
+ * \retval const TCollection_AsciiString & - Method substring
+ */
+//================================================================================
+
+const TCollection_AsciiString & _pyCommand::GetMethod()
+{
+ if ( GetBegPos( METHOD_IND ) == UNKNOWN )
+ {
+ // beginning
+ int begPos = GetBegPos( OBJECT_IND ) + myObj.Length();
+ bool forward = true;
+ if ( begPos < 1 ) {
+ begPos = myString.Location( "(", 1, Length() ) - 1;
+ forward = false;
+ }
+ // store
+ myMeth = GetWord( myString, begPos, forward );
+ SetBegPos( METHOD_IND, begPos );
+ }
+ //SCRUTE(myMeth);
+ return myMeth;
+}
+
+//================================================================================
+/*!
+ * \brief Returns true if there are brackets after the method
+ */
+//================================================================================
+
+bool _pyCommand::IsMethodCall()
+{
+ if ( GetMethod().IsEmpty() )
+ return false;
+ const char* s = myString.ToCString() + GetBegPos( METHOD_IND ) + myMeth.Length() - 1;
+ return ( s[0] == '(' || s[1] == '(' );
+}
+
+//================================================================================
+/*!
+ * \brief Return substring of python command looking like ResVal = Obj.Meth(Arg1,...)
+ * \retval const TCollection_AsciiString & - Arg<index> substring
+ */
+//================================================================================
+
+const TCollection_AsciiString & _pyCommand::GetArg( int index )
+{
+ if ( GetBegPos( ARG1_IND ) == UNKNOWN )
+ {
+ // Find all args
+
+ int pos = GetBegPos( METHOD_IND ) + myMeth.Length();
+ if ( pos < 1 )
+ pos = myString.Location( "(", 1, Length() );
+ else
+ --pos;
+
+ // we are at or before '(', skip it if present
+ if ( pos > 0 ) {
+ while ( pos <= Length() && myString.Value( pos ) != '(' ) ++pos;
+ if ( pos > Length() )
+ pos = 0;
+ }
+ if ( pos < 1 ) {
+ SetBegPos( ARG1_IND, 0 ); // even no '('
+ return theEmptyString;
+ }
+ ++pos;
+
+ list< TCollection_AsciiString > separatorStack( 1, ",)");
+ bool ignoreNesting = false;
+ int prevPos = pos;
+ while ( pos <= Length() )
+ {
+ const char chr = myString.Value( pos );
+
+ if ( separatorStack.back().Location( chr, 1, separatorStack.back().Length()))
+ {
+ if ( separatorStack.size() == 1 ) // a comma dividing args or a terminal ')' found
+ {
+ while ( pos-1 >= prevPos && isspace( myString.Value( prevPos )))
+ ++prevPos;
+ TCollection_AsciiString arg;
+ if ( pos-1 >= prevPos ) {
+ arg = myString.SubString( prevPos, pos-1 );
+ arg.RightAdjust(); // remove spaces
+ arg.LeftAdjust();
+ }
+ if ( !arg.IsEmpty() || chr == ',' )
+ {
+ SetBegPos( ARG1_IND + myArgs.Length(), prevPos );
+ myArgs.Append( arg );
+ }
+ if ( chr == ')' )
+ break;
+ prevPos = pos+1;
+ }
+ else // end of nesting args found
+ {
+ separatorStack.pop_back();
+ ignoreNesting = false;
+ }
+ }
+ else if ( !ignoreNesting )
+ {
+ switch ( chr ) {
+ case '(' : separatorStack.push_back(")"); break;
+ case '[' : separatorStack.push_back("]"); break;
+ case '\'': separatorStack.push_back("'"); ignoreNesting=true; break;
+ case '"' : separatorStack.push_back("\""); ignoreNesting=true; break;
+ default:;
+ }
+ }
+ ++pos;
+ }
+ }
+ if ( myArgs.Length() < index )
+ return theEmptyString;
+ return myArgs( index );
+}
+
+//================================================================================
+/*!
+ * \brief Return position where arguments begin
+ */
+//================================================================================
+
+int _pyCommand::GetArgBeginning() const
+{
+ int pos = GetBegPos( ARG1_IND );
+ if ( pos == UNKNOWN )
+ {
+ pos = GetBegPos( METHOD_IND ) + myMeth.Length();
+ if ( pos < 1 )
+ pos = myString.Location( "(", 4, Length() ); // 4 = strlen("b.c(")
+ }
+ return pos;
+}
+
+//================================================================================
+/*!
+ * \brief Check if char is a word part
+ * \param c - The character to check
+ * \retval bool - The check result
+ */
+//================================================================================
+
+static inline bool isWord(const char c, const bool dotIsWord)
+{
+ return
+ !isspace(c) && c != ',' && c != '=' && c != ')' && c != '(' && ( dotIsWord || c != '.');
+}
+
+//================================================================================
+/*!
+ * \brief Looks for a word in the string and returns word's beginning
+ * \param theString - The input string
+ * \param theStartPos - The position to start the search, returning word's beginning
+ * \param theForward - The search direction
+ * \retval TCollection_AsciiString - The found word
+ */
+//================================================================================
+
+TCollection_AsciiString _pyCommand::GetWord( const _AString & theString,
+ int & theStartPos,
+ const bool theForward,
+ const bool dotIsWord )
+{
+ int beg = theStartPos, end = theStartPos;
+ theStartPos = EMPTY;
+ if ( beg < 1 || beg > theString.Length() )
+ return theEmptyString;
+
+ if ( theForward ) { // search forward
+ // beg
+ while ( beg <= theString.Length() && !isWord( theString.Value( beg ), dotIsWord))
+ ++beg;
+ if ( beg > theString.Length() )
+ return theEmptyString; // no word found
+ // end
+ end = beg + 1;
+ char begChar = theString.Value( beg );
+ if ( begChar == '"' || begChar == '\'' || begChar == '[') {
+ char endChar = ( begChar == '[' ) ? ']' : begChar;
+ // end is at the corresponding quoting mark or bracket
+ while ( end < theString.Length() &&
+ ( theString.Value( end ) != endChar || theString.Value( end-1 ) == '\\'))
+ ++end;
+ }
+ else {
+ while ( end <= theString.Length() && isWord( theString.Value( end ), dotIsWord))
+ ++end;
+ --end;
+ }
+ }
+ else { // search backward
+ // end
+ while ( end > 0 && !isWord( theString.Value( end ), dotIsWord))
+ --end;
+ if ( end == 0 )
+ return theEmptyString; // no word found
+ beg = end - 1;
+ char endChar = theString.Value( end );
+ if ( endChar == '"' || endChar == '\'' || endChar == ']') {
+ char begChar = ( endChar == ']' ) ? '[' : endChar;
+ // beg is at the corresponding quoting mark
+ while ( beg > 1 &&
+ ( theString.Value( beg ) != begChar || theString.Value( beg-1 ) == '\\'))
+ --beg;
+ }
+ else {
+ while ( beg > 0 && isWord( theString.Value( beg ), dotIsWord))
+ --beg;
+ ++beg;
+ }
+ }
+ theStartPos = beg;
+ //cout << theString << " ---- " << beg << " - " << end << endl;
+ return theString.SubString( beg, end );
+}
+
+//================================================================================
+/*!
+ * \brief Returns true if the string looks like a study entry
+ */
+//================================================================================
+
+bool _pyCommand::IsStudyEntry( const TCollection_AsciiString& str )
+{
+ if ( str.Length() < 5 ) return false;
+
+ int nbColons = 0, isColon;
+ for ( int i = 1; i <= str.Length(); ++i )
+ {
+ char c = str.Value(i);
+ if (!( isColon = (c == ':')) && ( c < '0' || c > '9' ))
+ return false;
+ nbColons += isColon;
+ }
+ return nbColons > 2 && str.Length()-nbColons > 2;
+}
+
+//================================================================================
+/*!
+ * \brief Returns true if the string looks like an object ID but not like a list,
+ * string, command etc.
+ */
+//================================================================================
+
+bool _pyCommand::IsID( const TCollection_AsciiString& str )
+{
+ if ( str.Length() < 1 ) return false;
+
+ const char* s = str.ToCString();
+
+ for ( int i = 0; i < str.Length(); ++i )
+ if ( !IsIDChar( s[i] ))
+ return false;
+
+ return true;
+}
+
+//================================================================================
+/*!
+ * \brief Finds entries in a sting
+ */
+//================================================================================
+
+std::list< _pyID > _pyCommand::GetStudyEntries( const TCollection_AsciiString& str )
+{
+ std::list< _pyID > resList;
+ int pos = 0;
+ while ( ++pos <= str.Length() )
+ {
+ if ( !isdigit( str.Value( pos ))) continue;
+ if ( pos != 1 && ( isalpha( str.Value( pos-1 ) || str.Value( pos-1 ) == ':'))) continue;
+
+ int end = pos;
+ while ( ++end <= str.Length() && ( isdigit( str.Value( end )) || str.Value( end ) == ':' ));
+ _pyID entry = str.SubString( pos, end-1 );
+ pos = end;
+ if ( IsStudyEntry( entry ))
+ resList.push_back( entry );
+ }
+ return resList;
+}
+
+//================================================================================
+/*!
+ * \brief Look for position where not space char is
+ * \param theString - The string
+ * \param thePos - The position to search from and which returns result
+ * \retval bool - false if there are only space after thePos in theString
+ */
+//================================================================================
+
+bool _pyCommand::SkipSpaces( const TCollection_AsciiString & theString, int & thePos )
+{
+ if ( thePos < 1 || thePos > theString.Length() )
+ return false;
+
+ while ( thePos <= theString.Length() && isspace( theString.Value( thePos )))
+ ++thePos;
+
+ return thePos <= theString.Length();
+}
+
+//================================================================================
+/*!
+ * \brief Modify a part of the command
+ * \param thePartIndex - The index of the part
+ * \param thePart - The new part string
+ * \param theOldPart - The old part
+ */
+//================================================================================
+
+void _pyCommand::SetPart(int thePartIndex, const TCollection_AsciiString& thePart,
+ TCollection_AsciiString& theOldPart)
+{
+ int pos = GetBegPos( thePartIndex );
+ if ( pos <= Length() && theOldPart != thePart)
+ {
+ TCollection_AsciiString seperator;
+ if ( pos < 1 ) {
+ pos = GetBegPos( thePartIndex + 1 );
+ if ( pos < 1 ) return;
+ switch ( thePartIndex ) {
+ case RESULT_IND: seperator = " = "; break;
+ case OBJECT_IND: seperator = "."; break;
+ case METHOD_IND: seperator = "()"; break;
+ default:;
+ }
+ }
+ myString.Remove( pos, theOldPart.Length() );
+ if ( !seperator.IsEmpty() )
+ myString.Insert( pos , seperator );
+ myString.Insert( pos, thePart );
+ // update starting positions of the following parts
+ int posDelta = thePart.Length() + seperator.Length() - theOldPart.Length();
+ for ( int i = thePartIndex + 1; i <= myBegPos.Length(); ++i ) {
+ if ( myBegPos( i ) > 0 )
+ myBegPos( i ) += posDelta;
+ }
+ theOldPart = thePart;
+ }
+}
+
+//================================================================================
+/*!
+ * \brief Set agrument
+ * \param index - The argument index, it counts from 1
+ * \param theArg - The argument string
+ */
+//================================================================================
+
+void _pyCommand::SetArg( int index, const TCollection_AsciiString& theArg)
+{
+ FindAllArgs();
+ int argInd = ARG1_IND + index - 1;
+ int pos = GetBegPos( argInd );
+ if ( pos < 1 ) // no index-th arg exist, append inexistent args
+ {
+ // find a closing parenthesis
+ if ( GetNbArgs() != 0 && index <= GetNbArgs() ) {
+ int lastArgInd = GetNbArgs();
+ pos = GetBegPos( ARG1_IND + lastArgInd - 1 ) + GetArg( lastArgInd ).Length();
+ while ( pos > 0 && pos <= Length() && myString.Value( pos ) != ')' )
+ ++pos;
+ }
+ else {
+ pos = Length();
+ while ( pos > 0 && myString.Value( pos ) != ')' )
+ --pos;
+ }
+ if ( pos < 1 || myString.Value( pos ) != ')' ) { // no parentheses at all
+ myString += "()";
+ pos = Length();
+ }
+ while ( myArgs.Length() < index ) {
+ if ( myArgs.Length() )
+ myString.Insert( pos++, "," );
+ myArgs.Append("None");
+ myString.Insert( pos, myArgs.Last() );
+ SetBegPos( ARG1_IND + myArgs.Length() - 1, pos );
+ pos += myArgs.Last().Length();
+ }
+ }
+ SetPart( argInd, theArg, myArgs( index ));
+}
+
+//================================================================================
+/*!
+ * \brief Empty arg list
+ */
+//================================================================================
+
+void _pyCommand::RemoveArgs()
+{
+ if ( int pos = myString.Location( '(', Max( 1, GetBegPos( METHOD_IND )), Length() ))
+ myString.Trunc( pos );
+ myString += ")";
+ myArgs.Clear();
+ if ( myBegPos.Length() >= ARG1_IND )
+ myBegPos.Remove( ARG1_IND, myBegPos.Length() );
+}
+
+//================================================================================
+/*!
+ * \brief Comment a python command
+ */
+//================================================================================
+
+void _pyCommand::Comment()
+{
+ if ( IsEmpty() ) return;
+
+ int i = 1;
+ while ( i <= Length() && isspace( myString.Value(i) )) ++i;
+ if ( i <= Length() )
+ {
+ myString.Insert( i, "#" );
+ for ( int iPart = 1; iPart <= myBegPos.Length(); ++iPart )
+ {
+ int begPos = GetBegPos( iPart );
+ if ( begPos != UNKNOWN && begPos != EMPTY )
+ SetBegPos( iPart, begPos + 1 );
+ }
+ }
+}
+
+//================================================================================
+/*!
+ * \brief Set dependent commands after this one
+ */
+//================================================================================
+
+bool _pyCommand::SetDependentCmdsAfter() const
+{
+ bool orderChanged = false;
+ list< Handle(_pyCommand)>::const_reverse_iterator cmd = myDependentCmds.rbegin();
+ for ( ; cmd != myDependentCmds.rend(); ++cmd ) {
+ if ( (*cmd)->GetOrderNb() < GetOrderNb() ) {
+ orderChanged = true;
+ theGen->SetCommandAfter( *cmd, this );
+ (*cmd)->SetDependentCmdsAfter();
+ }
+ }
+ return orderChanged;
+}
+//================================================================================
+/*!
+ * \brief Insert accessor method after theObjectID
+ * \param theObjectID - id of the accessed object
+ * \param theAcsMethod - name of the method giving access to the object
+ * \retval bool - false if theObjectID is not found in the command string
+ */
+//================================================================================
+
+bool _pyCommand::AddAccessorMethod( _pyID theObjectID, const char* theAcsMethod )
+{
+ if ( !theAcsMethod )
+ return false;
+ // start object search from the object, i.e. ignore result
+ GetObject();
+ int beg = GetBegPos( OBJECT_IND );
+ if ( beg < 1 || beg > Length() )
+ return false;
+ bool added = false;
+ while (( beg = myString.Location( theObjectID, beg, Length() )))
+ {
+ // check that theObjectID is not just a part of a longer ID
+ int afterEnd = beg + theObjectID.Length();
+ Standard_Character c = myString.Value( afterEnd );
+ if ( !IsIDChar( c ))
+ {
+ // check if accessor method already present
+ if ( c != '.' ||
+ myString.Location( (char*) theAcsMethod, afterEnd, Length() ) != afterEnd+1) {
+ // insertion
+ int oldLen = Length();
+ myString.Insert( afterEnd, (char*) theAcsMethod );
+ myString.Insert( afterEnd, "." );
+ // update starting positions of the parts following the modified one
+ int posDelta = Length() - oldLen;
+ for ( int i = 1; i <= myBegPos.Length(); ++i ) {
+ if ( myBegPos( i ) > afterEnd )
+ myBegPos( i ) += posDelta;
+ }
+ added = true;
+ }