-// Copyright (C) 2007-2015 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
#include <unistd.h>
#endif
-
-IMPLEMENT_STANDARD_HANDLE (_pyObject ,Standard_Transient);
-IMPLEMENT_STANDARD_HANDLE (_pyCommand ,Standard_Transient);
-IMPLEMENT_STANDARD_HANDLE (_pyHypothesisReader,Standard_Transient);
-IMPLEMENT_STANDARD_HANDLE (_pyGen ,_pyObject);
-IMPLEMENT_STANDARD_HANDLE (_pyMesh ,_pyObject);
-IMPLEMENT_STANDARD_HANDLE (_pySubMesh ,_pyObject);
-IMPLEMENT_STANDARD_HANDLE (_pyMeshEditor ,_pyObject);
-IMPLEMENT_STANDARD_HANDLE (_pyHypothesis ,_pyObject);
-IMPLEMENT_STANDARD_HANDLE (_pySelfEraser ,_pyObject);
-IMPLEMENT_STANDARD_HANDLE (_pyGroup ,_pyObject);
-IMPLEMENT_STANDARD_HANDLE (_pyFilter ,_pyObject);
-IMPLEMENT_STANDARD_HANDLE (_pyAlgorithm ,_pyHypothesis);
-IMPLEMENT_STANDARD_HANDLE (_pyComplexParamHypo,_pyHypothesis);
-IMPLEMENT_STANDARD_HANDLE (_pyNumberOfSegmentsHyp,_pyHypothesis);
-
-IMPLEMENT_STANDARD_RTTIEXT(_pyObject ,Standard_Transient);
-IMPLEMENT_STANDARD_RTTIEXT(_pyCommand ,Standard_Transient);
-IMPLEMENT_STANDARD_RTTIEXT(_pyHypothesisReader,Standard_Transient);
-IMPLEMENT_STANDARD_RTTIEXT(_pyGen ,_pyObject);
-IMPLEMENT_STANDARD_RTTIEXT(_pyMesh ,_pyObject);
-IMPLEMENT_STANDARD_RTTIEXT(_pySubMesh ,_pyObject);
-IMPLEMENT_STANDARD_RTTIEXT(_pyMeshEditor ,_pyObject);
-IMPLEMENT_STANDARD_RTTIEXT(_pyHypothesis ,_pyObject);
-IMPLEMENT_STANDARD_RTTIEXT(_pySelfEraser ,_pyObject);
-IMPLEMENT_STANDARD_RTTIEXT(_pyGroup ,_pyObject);
-IMPLEMENT_STANDARD_RTTIEXT(_pyFilter ,_pyObject);
-IMPLEMENT_STANDARD_RTTIEXT(_pyAlgorithm ,_pyHypothesis);
-IMPLEMENT_STANDARD_RTTIEXT(_pyComplexParamHypo,_pyHypothesis);
-IMPLEMENT_STANDARD_RTTIEXT(_pyNumberOfSegmentsHyp,_pyHypothesis);
-IMPLEMENT_STANDARD_RTTIEXT(_pyLayerDistributionHypo,_pyHypothesis);
-IMPLEMENT_STANDARD_RTTIEXT(_pySegmentLengthAroundVertexHyp,_pyHypothesis);
+OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyObject ,Standard_Transient);
+OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyCommand ,Standard_Transient);
+OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyHypothesisReader,Standard_Transient);
+OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyGen ,_pyObject);
+OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyMesh ,_pyObject);
+OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pySubMesh ,_pyObject);
+OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyMeshEditor ,_pyObject);
+OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyHypothesis ,_pyObject);
+OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pySelfEraser ,_pyObject);
+OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyGroup ,_pyObject);
+OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyFilter ,_pyObject);
+OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyAlgorithm ,_pyHypothesis);
+OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyComplexParamHypo,_pyHypothesis);
+OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyNumberOfSegmentsHyp,_pyHypothesis);
+OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyLayerDistributionHypo,_pyHypothesis);
+OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pySegmentLengthAroundVertexHyp,_pyHypothesis);
using namespace std;
using SMESH::TPythonDump;
_AString comment;
_pyID obj = cmd->GetObject();
- if ( obj.Search( "print " ) == 1 )
+ if ( obj.Search( "print(" ) == 1 )
return; // print statement
if ( !obj.IsEmpty() && obj.Value( obj.Length() ) == ')' )
// - FT_ConnectedElements = 39
// v 7.6.0: FT_Undefined == 47, new items:
// - FT_BelongToMeshGroup = 22
+ // v 8.1.0: FT_Undefined == 48, new items:
+ // - FT_NodeConnectivityNumber= 22
//
// It's necessary to continue recording this history and to fill
// undef2newItems (see below) accordingly.
undef2newItems[ 45 ].push_back( 36 );
undef2newItems[ 46 ].push_back( 39 );
undef2newItems[ 47 ].push_back( 22 );
+ undef2newItems[ 48 ].push_back( 22 );
ASSERT( undef2newItems.rbegin()->first == SMESH::FT_Undefined );
}
}
}
}
+
+ bool _FilterArg( const _AString& theArg )
+ {
+ static std::list<_AString> filteredArgs;
+ static bool initialized = false;
+ if ( !initialized ) {
+ initialized = true;
+ filteredArgs.push_back( "SMESH.MED_V2_1" );
+ filteredArgs.push_back( "SMESH.MED_V2_2" );
+ }
+ return std::find( filteredArgs.begin(), filteredArgs.end(), theArg ) != filteredArgs.end();
+ }
}
//================================================================================
* \param theRemovedObjIDs - entries of objects whose created commands were removed
* \param theHistoricalDump - true means to keep all commands, false means
* to exclude commands relating to objects removed from study
- * \retval TCollection_AsciiString - Convertion result
+ * \retval TCollection_AsciiString - Conversion result
*/
//================================================================================
Resource_DataMapOfAsciiStringAsciiString& theEntry2AccessorMethod,
Resource_DataMapOfAsciiStringAsciiString& theObjectNames,
std::set< TCollection_AsciiString >& theRemovedObjIDs,
- SALOMEDS::Study_ptr& theStudy,
const bool theToKeepAllCommands)
{
std::list< TCollection_AsciiString >::iterator lineIt;
theGen = new _pyGen( theEntry2AccessorMethod,
theObjectNames,
theRemovedObjIDs,
- theStudy,
theToKeepAllCommands );
for ( lineIt = theScriptLines.begin(); lineIt != theScriptLines.end(); ++lineIt )
set<_pyID> createdObjects;
createdObjects.insert( "smeshBuilder" );
createdObjects.insert( "smesh" );
- createdObjects.insert( "theStudy" );
for ( cmd = theGen->GetCommands().begin(); cmd != theGen->GetCommands().end(); ++cmd )
{
#ifdef DUMP_CONVERSION
_pyGen::_pyGen(Resource_DataMapOfAsciiStringAsciiString& theEntry2AccessorMethod,
Resource_DataMapOfAsciiStringAsciiString& theObjectNames,
std::set< TCollection_AsciiString >& theRemovedObjIDs,
- SALOMEDS::Study_ptr& theStudy,
const bool theToKeepAllCommands)
: _pyObject( new _pyCommand( "", 0 )),
myNbCommands( 0 ),
myRemovedObjIDs( theRemovedObjIDs ),
myNbFilters( 0 ),
myToKeepAllCommands( theToKeepAllCommands ),
- myStudy( SALOMEDS::Study::_duplicate( theStudy )),
myGeomIDNb(0), myGeomIDIndex(-1)
{
// make that GetID() to return TPythonDump::SMESHGenName()
GetCreationCmd()->GetString() += "=";
// Find 1st digit of study entry by which a GEOM object differs from a SMESH object
- if ( !theObjectNames.IsEmpty() && !CORBA::is_nil( theStudy ))
+ if ( !theObjectNames.IsEmpty() )
{
// find a GEOM entry
_pyID geomID;
- SALOMEDS::SComponent_wrap geomComp = theStudy->FindComponent("GEOM");
+ SALOMEDS::SComponent_wrap geomComp = SMESH_Gen_i::getStudyServant()->FindComponent("GEOM");
if ( geomComp->_is_nil() ) return;
CORBA::String_var entry = geomComp->GetID();
geomID = entry.in();
_AString indent = aCommand->GetIndentation();
_AString tryStr = indent + "try:";
_AString newCmd = indent + tab + ( aCommand->GetString().ToCString() + indent.Length() );
+ _AString pasCmd = indent + tab + "pass"; // to keep valid if newCmd is erased
_AString excStr = indent + "except:";
- _AString msgStr = indent + "\tprint '"; msgStr += method + "() failed. Invalid file name?'";
+ _AString msgStr = indent + "\tprint('"; msgStr += method + "() failed. Invalid file name?')";
myCommands.insert( --myCommands.end(), new _pyCommand( tryStr, myNbCommands ));
aCommand->Clear();
aCommand->GetString() = newCmd;
aCommand->SetOrderNb( ++myNbCommands );
+ myCommands.push_back( new _pyCommand( pasCmd, ++myNbCommands ));
myCommands.push_back( new _pyCommand( excStr, ++myNbCommands ));
myCommands.push_back( new _pyCommand( msgStr, ++myNbCommands ));
}
{
// set SMESH.GeometryType instead of a numerical Threshold
const int nbTypes = SMESH::Geom_LAST;
- const char* types[nbTypes] = {
+ const char* types[] = {
"Geom_POINT", "Geom_EDGE", "Geom_TRIANGLE", "Geom_QUADRANGLE", "Geom_POLYGON",
"Geom_TETRA", "Geom_PYRAMID", "Geom_HEXA", "Geom_PENTA", "Geom_HEXAGONAL_PRISM",
"Geom_POLYHEDRA", "Geom_BALL" };
Threshold = SMESH + types[ iGeom ];
#ifdef _DEBUG_
// is types complete? (compilation failure mains that enum GeometryType changed)
- int _assert[( sizeof(types) / sizeof(const char*) == nbTypes ) ? 1 : -1 ]; _assert[0]=1;
+ int _asrt[( sizeof(types) / sizeof(const char*) == nbTypes ) ? 2 : -1 ]; _asrt[0]=_asrt[1];
#endif
}
if (Type == "SMESH.FT_EntityType")
{
// set SMESH.EntityType instead of a numerical Threshold
const int nbTypes = SMESH::Entity_Last;
- const char* types[nbTypes] = {
+ const char* types[] = {
"Entity_Node", "Entity_0D", "Entity_Edge", "Entity_Quad_Edge",
"Entity_Triangle", "Entity_Quad_Triangle", "Entity_BiQuad_Triangle",
"Entity_Quadrangle", "Entity_Quad_Quadrangle", "Entity_BiQuad_Quadrangle",
if ( -1 < iGeom && iGeom < nbTypes )
Threshold = SMESH + types[ iGeom ];
#ifdef _DEBUG_
- // is types complete? (compilation failure mains that enum EntityType changed)
- int _assert[( sizeof(types) / sizeof(const char*) == nbTypes ) ? 1 : -1 ]; _assert[0]=1;
+ // is 'types' complete? (compilation failure mains that enum EntityType changed)
+ int _asrt[( sizeof(types) / sizeof(const char*) == nbTypes ) ? 2 : -1 ]; _asrt[0]=_asrt[1];
#endif
}
}
static TStringSet smeshpyMethods;
if ( smeshpyMethods.empty() ) {
const char * names[] =
- { "SetEmbeddedMode","IsEmbeddedMode","SetCurrentStudy","GetCurrentStudy",
+ { "SetEmbeddedMode","IsEmbeddedMode","UpdateStudy","GetStudy",
"GetPattern","GetSubShapesId",
"" }; // <- mark of array end
smeshpyMethods.Insert( names );
* \brief Find algorithm able to create a hypothesis
* \param theGeom - The shape ID the algorithm was created on
* \param theMesh - The mesh ID that created the algorithm
- * \param theHypothesis - The hypothesis the algorithm sould be able to create
+ * \param theHypothesis - The hypothesis the algorithm should be able to create
* \retval Handle(_pyHypothesis) - The found algo
*/
//================================================================================
}
while ( myObjectNames.IsBound( aNewID ) );
- myObjectNames.Bind( aNewID, myObjectNames.IsBound( theID )
- ? (myObjectNames.Find( theID ) + _pyID( "_" ) + _pyID( index-1 ))
- : _pyID( "A" ) + aNewID );
+ if ( myObjectNames.IsBound( theID ) )
+ myObjectNames.Bind( aNewID, ( myObjectNames.Find( theID ) + _pyID( "_" ) + _pyID( index-1 ) ) );
+ else
+ myObjectNames.Bind( aNewID, ( _pyID( "A" ) + aNewID ) );
return aNewID;
}
return;
const bool isHyp = theObj->IsKind( STANDARD_TYPE( _pyHypothesis ));
- Handle(_pyObject) existing =
- isHyp ? FindHyp( theObj->GetID() ) : FindObject( theObj->GetID() );
+ Handle(_pyObject) existing;
+ if( isHyp )
+ existing = FindHyp( theObj->GetID() );
+ else
+ existing = FindObject( theObj->GetID() );
if ( !existing.IsNull() && existing != theObj )
{
existing->SetRemovedFromStudy( true );
return id_obj->second;
}
{
- map< _pyID, Handle(_pyMesh) >::const_iterator id_obj = myMeshes.find( theObjID );
+ _pyGen* me = const_cast< _pyGen* >( this );
+ map< _pyID, Handle(_pyMesh) >::iterator id_obj = me->myMeshes.find( theObjID );
if ( id_obj != myMeshes.end() )
return id_obj->second;
}
// either the SMESH object is not in study or it is a GEOM object
if ( IsGeomObject( theObjID ))
{
- SALOMEDS::SObject_wrap so = myStudy->FindObjectID( theObjID.ToCString() );
+ SALOMEDS::SObject_wrap so = SMESH_Gen_i::getStudyServant()->FindObjectID( theObjID.ToCString() );
if ( so->_is_nil() ) return true;
CORBA::Object_var obj = so->GetObject();
return CORBA::is_nil( obj );
// ----------------------------------------------------------------------
else if ( theCommand->MethodStartsFrom( "Export" ))
{
- if ( method == "ExportToMED" || // ExportToMED() --> ExportMED()
- method == "ExportToMEDX" ) // ExportToMEDX() --> ExportMED()
+ if ( method == "ExportToMED" || // ExportToMED() --> ExportMED()
+ method == "ExportToMEDX" || // ExportToMEDX() --> ExportMED()
+ method == "ExportMED" )
{
theCommand->SetMethod( "ExportMED" );
- if ( theCommand->GetNbArgs() == 5 )
+ // filter out deprecated version parameter
+ vector< _AString > args;
+ for ( int i = 1; i <= theCommand->GetNbArgs(); i++ ) {
+ if ( !_FilterArg( theCommand->GetArg( i ) ) )
+ args.push_back( theCommand->GetArg( i ) );
+ }
+ theCommand->RemoveArgs();
+ for ( uint i = 0; i < args.size(); i++ )
+ theCommand->SetArg( i+1, args[i] );
+ if ( theCommand->GetNbArgs() == 4 )
{
// ExportToMEDX(...,autoDimension) -> ExportToMEDX(...,meshPart=None,autoDimension)
- _AString autoDimension = theCommand->GetArg( 5 );
- theCommand->SetArg( 5, "None" );
- theCommand->SetArg( 6, autoDimension );
+ _AString autoDimension = theCommand->GetArg( 4 );
+ theCommand->SetArg( 4, "None" );
+ theCommand->SetArg( 5, autoDimension );
}
}
else if ( method == "ExportCGNS" )
TCollection_AsciiString newMethod = method;
newMethod.Remove( /*where=*/7, /*howmany=*/6 );
theCommand->SetMethod( newMethod );
+ // filter out deprecated version parameter
+ vector< _AString > args;
+ for ( int i = 1; i <= theCommand->GetNbArgs(); i++ ) {
+ if ( !_FilterArg( theCommand->GetArg( i ) ) )
+ args.push_back( theCommand->GetArg( i ) );
+ }
+ theCommand->RemoveArgs();
+ for ( uint i = 0; i < args.size(); i++ )
+ theCommand->SetArg( i+1, args[i] );
// make the 1st arg be the last one (or last but three for ExportMED())
_pyID partID = theCommand->GetArg( 1 );
int nbArgs = theCommand->GetNbArgs() - 3 * (newMethod == "ExportMED");
{
addCmd = *cmd;
cmd = addHypCmds.erase( cmd );
- if ( !theGen->IsToKeepAllCommands() && CanClear() ) {
+ if ( !theGen->IsToKeepAllCommands() /*&& CanClear()*/ ) {
addCmd->Clear();
theCommand->Clear();
}
const char * names[] =
{ "ExportDAT","ExportUNV","ExportSTL","ExportSAUV", "RemoveGroup","RemoveGroupWithContents",
"GetGroups","UnionGroups","IntersectGroups","CutGroups","CreateDimGroup","GetLog","GetId",
- "ClearLog","GetStudyId","HasDuplicatedGroupNamesMED","GetMEDMesh","NbNodes","NbElements",
+ "ClearLog","HasDuplicatedGroupNamesMED","GetMEDMesh","NbNodes","NbElements",
"NbEdges","NbEdgesOfOrder","NbFaces","NbFacesOfOrder","NbTriangles",
"NbTrianglesOfOrder","NbQuadrangles","NbQuadranglesOfOrder","NbPolygons","NbVolumes",
"NbVolumesOfOrder","NbTetras","NbTetrasOfOrder","NbHexas","NbHexasOfOrder",
for ( ; m != fatherMeshes.end(); ++m )
addFatherMesh( *m );
// if ( removedGeom )
- // SetRemovedFromStudy(); // as reffered geometry not in study
+ // SetRemovedFromStudy(); // as referred geometry not in study
}
if ( myGeomNotInStudy )
return;
* \brief Convert the command adding a hypothesis to mesh into a smesh command
* \param theCmd - The command like mesh.AddHypothesis( geom, hypo )
* \param theAlgo - The algo that can create this hypo
- * \retval bool - false if the command cant be converted
+ * \retval bool - false if the command can't be converted
*/
//================================================================================
//================================================================================
/*!
- * \brief clear creation, arg and unkown commands
+ * \brief clear creation, arg and unknown commands
*/
//================================================================================
* \brief additionally to Addition2Creation, clears SetDistrType() command
* \param theCmd - AddHypothesis() command
* \param theMesh - mesh to which a hypothesis is added
- * \retval bool - convertion result
+ * \retval bool - conversion result
*/
//================================================================================
* into regular1D.LengthNearVertex( length, vertex )
* \param theCmd - The command like mesh.AddHypothesis( vertex, SegmentLengthAroundVertex )
* \param theMesh - The mesh needing this hypo
- * \retval bool - false if the command cant be converted
+ * \retval bool - false if the command can't be converted
*/
//================================================================================
_pyID vertex = theCmd->GetArg( 1 );
- // the problem here is that segment algo will not be found
+ // the problem here is that segment algo can be not found
// by pyHypothesis::Addition2Creation() for <vertex>, so we try to find
// geometry where segment algorithm is assigned
- Handle(_pyHypothesis) algo;
_pyID geom = vertex;
+ Handle(_pyHypothesis) algo = theGen->FindAlgo( geom, theMeshID, this );
while ( algo.IsNull() && !geom.IsEmpty()) {
// try to find geom as a father of <vertex>
geom = FatherID( geom );
algo = theGen->FindAlgo( geom, theMeshID, this );
}
- if ( algo.IsNull() )
+ if ( algo.IsNull() || geom.IsEmpty() )
return false; // also possible to find geom as brother of veretex...
+
// set geom instead of vertex
theCmd->SetArg( 1, geom );
- // set vertex as a second arg
- if ( myCurCrMethod->myArgs.size() < 1) setCreationArg( 1, "1" ); // :(
- setCreationArg( 2, vertex );
-
// mesh.AddHypothesis(vertex, SegmentLengthAroundVertex) -->
- // theMeshID.LengthNearVertex( length, vertex )
- return _pyHypothesis::Addition2Creation( theCmd, theMeshID );
+ // SegmentLengthAroundVertex = Regular_1D.LengthNearVertex( length )
+ if ( _pyHypothesis::Addition2Creation( theCmd, theMeshID ))
+ {
+ // set vertex as a second arg
+ theCmd->SetArg( 2, vertex );
+
+ return true;
+ }
}
return false;
}
* \brief Convert the command adding an algorithm to mesh
* \param theCmd - The command like mesh.AddHypothesis( geom, algo )
* \param theMesh - The mesh needing this algo
- * \retval bool - false if the command cant be converted
+ * \retval bool - false if the command can't be converted
*/
//================================================================================
