52566]: TC7.5.0: Empty group of Balls at Diameter Equal to filter

[modules/smesh.git] / src / SMESH_I / SMESH_2smeshpy.cxx

diff --git a/src/SMESH_I/SMESH_2smeshpy.cxx b/src/SMESH_I/SMESH_2smeshpy.cxx
index 6b3da9a340f8a08fd7e8ac91c37608c0294fd79a..564632744b8c4f7c98413b5235e91c2183c21ca2 100644 (file)
--- a/src/SMESH_I/SMESH_2smeshpy.cxx
+++ b/src/SMESH_I/SMESH_2smeshpy.cxx
@@ -1,4 +1,4 @@
-// Copyright (C) 2007-2013  CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2014  CEA/DEN, EDF R&D, OPEN CASCADE
 //
 // Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
@@ -6,7 +6,7 @@
 // This library is free software; you can redistribute it and/or
 // modify it under the terms of the GNU Lesser General Public
 // License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
 //
 // This library is distributed in the hope that it will be useful,
 // but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -372,7 +372,7 @@ namespace {
    */
   //================================================================================
 
-  void StructToList( Handle( _pyCommand)& theCommand )
+  void StructToList( Handle( _pyCommand)& theCommand, const bool checkMethod=true )
   {
     static TStringSet methodsAcceptingList;
     if ( methodsAcceptingList.empty() ) {
@@ -386,11 +386,11 @@ namespace {
         "ExtrusionSweepObject2D","ExtrusionSweepObject2DMakeGroups",
         "Translate","TranslateMakeGroups","TranslateMakeMesh",
         "TranslateObject","TranslateObjectMakeGroups", "TranslateObjectMakeMesh",
-        "ExtrusionAlongPathX","ExtrusionAlongPathObjX"
+        "ExtrusionAlongPathX","ExtrusionAlongPathObjX","SplitHexahedraIntoPrisms"
         ,"" }; // <- mark of the end
       methodsAcceptingList.Insert( methodNames );
     }
-    if ( methodsAcceptingList.Contains( theCommand->GetMethod() ))
+    if ( !checkMethod || methodsAcceptingList.Contains( theCommand->GetMethod() ))
     {
       for ( int i = theCommand->GetNbArgs(); i > 0; --i )
       {
@@ -1963,9 +1963,9 @@ void _pyMesh::Process( const Handle(_pyCommand)& theCommand )
       TCollection_AsciiString newMethod = method;
       newMethod.Remove( 7, 6 );
       theCommand->SetMethod( newMethod );
-      // make the 1st arg be the last one (or last but one for ExportMED())
+      // make the 1st arg be the last one (or last but three for ExportMED())
       _pyID partID = theCommand->GetArg( 1 );
-      int nbArgs = theCommand->GetNbArgs() - (newMethod == "ExportMED");
+      int nbArgs = theCommand->GetNbArgs() - 3 * (newMethod == "ExportMED");
       for ( int i = 2; i <= nbArgs; ++i )
         theCommand->SetArg( i-1, theCommand->GetArg( i ));
       theCommand->SetArg( nbArgs, partID );
@@ -2006,6 +2006,14 @@ void _pyMesh::Process( const Handle(_pyCommand)& theCommand )
             addCmd->Clear();
             theCommand->Clear();
           }
+          else
+          {
+            // mesh.AddHypothesis(geom, hyp) --> mesh.AddHypothesis(hyp, geom=0)
+            addCmd->RemoveArgs();
+            addCmd->SetArg( 1, hypID );
+            if ( isLocal )
+              addCmd->SetArg( 2, geomID );
+          }
         }
         else
         {
@@ -2075,6 +2083,7 @@ bool _pyMesh::NeedMeshAccess( const Handle(_pyCommand)& theCommand )
         "GetSubMeshElementsId","GetSubMeshNodesId","GetSubMeshElementType","Dump","GetNodeXYZ",
         "GetNodeInverseElements","GetShapeID","GetShapeIDForElem","GetElemNbNodes",
         "GetElemNode","IsMediumNode","IsMediumNodeOfAnyElem","ElemNbEdges","ElemNbFaces",
+        "GetElemFaceNodes", "GetFaceNormal", "FindElementByNodes",
         "IsPoly","IsQuadratic","BaryCenter","GetHypothesisList", "SetAutoColor", "GetAutoColor",
         "Clear", "ConvertToStandalone", "GetMeshOrder", "SetMeshOrder"
         ,"" }; // <- mark of end
@@ -2360,7 +2369,7 @@ void _pyMeshEditor::Process( const Handle(_pyCommand)& theCommand)
       "AddNode","Add0DElement","AddEdge","AddFace","AddPolygonalFace","AddBall",
       "AddVolume","AddPolyhedralVolume","AddPolyhedralVolumeByFaces",
       "MoveNode", "MoveClosestNodeToPoint",
-      "InverseDiag","DeleteDiag","Reorient","ReorientObject",
+      "InverseDiag","DeleteDiag","Reorient","ReorientObject","Reorient2DBy3D",
       "TriToQuad","TriToQuadObject", "QuadTo4Tri", "SplitQuad","SplitQuadObject",
       "BestSplit","Smooth","SmoothObject","SmoothParametric","SmoothParametricObject",
       "ConvertToQuadratic","ConvertFromQuadratic","RenumberNodes","RenumberElements",
@@ -2375,7 +2384,7 @@ void _pyMeshEditor::Process( const Handle(_pyCommand)& theCommand)
       "GetLastCreatedElems",
       "MirrorMakeMesh","MirrorObjectMakeMesh","TranslateMakeMesh","TranslateObjectMakeMesh",
       "Scale","ScaleMakeMesh","RotateMakeMesh","RotateObjectMakeMesh","MakeBoundaryMesh",
-      "MakeBoundaryElements", "SplitVolumesIntoTetra",
+      "MakeBoundaryElements", "SplitVolumesIntoTetra","SplitHexahedraIntoPrisms",
       "DoubleElements","DoubleNodes","DoubleNode","DoubleNodeGroup","DoubleNodeGroups",
       "DoubleNodeElem","DoubleNodeElemInRegion","DoubleNodeElemGroup",
       "DoubleNodeElemGroupInRegion","DoubleNodeElemGroups","DoubleNodeElemGroupsInRegion",
@@ -2631,6 +2640,8 @@ Handle(_pyHypothesis) _pyHypothesis::NewHypothesis( const Handle(_pyCommand)& th
     hyp->SetConvMethodAndType( "SetGrid", "Cartesian_3D");
     for ( int iArg = 0; iArg < 4; ++iArg )
       hyp->setCreationArg( iArg+1, "[]");
+    hyp->AddAccumulativeMethod( "SetGrid" );
+    hyp->AddAccumulativeMethod( "SetGridSpacing" );
   }
   else
   {
@@ -3089,9 +3100,11 @@ void _pyComplexParamHypo::Process( const Handle(_pyCommand)& theCommand)
   {
     // CartesianParameters3D hyp
 
-    if ( theCommand->GetMethod() == "SetSizeThreshold" )
+    if ( theCommand->GetMethod() == "SetSizeThreshold"  ||
+         theCommand->GetMethod() == "SetToAddEdges" )
     {
-      setCreationArg( 4, theCommand->GetArg( 1 ));
+      int iEdges = ( theCommand->GetMethod().Value( 4 ) == 'T' );
+      setCreationArg( 4+iEdges, theCommand->GetArg( 1 ));
       myArgCommands.push_back( theCommand );
       return;
     }
@@ -3113,7 +3126,9 @@ void _pyComplexParamHypo::Process( const Handle(_pyCommand)& theCommand)
         myCurCrMethod->myArgs[ iArg ] += "]";
       }
       myArgCommands.push_back( theCommand );
-      rememberCmdOfParameter( theCommand );
+      //rememberCmdOfParameter( theCommand ); -- these commands are marked as
+      //                                  accumulative, else, if the creation
+      //                 is not converted, commands for axes 1 and 2 are lost
       return;
     }
   }
@@ -3148,19 +3163,34 @@ void _pyComplexParamHypo::Process( const Handle(_pyCommand)& theCommand)
 
 void _pyComplexParamHypo::Flush()
 {
+  list < Handle(_pyCommand) >::iterator cmd;
   if ( IsWrapped() )
   {
-    list < Handle(_pyCommand) >::iterator cmd = myUnusedCommands.begin();
-    for ( ; cmd != myUnusedCommands.end(); ++cmd )
+    for ( cmd = myUnusedCommands.begin(); cmd != myUnusedCommands.end(); ++cmd )
       if ((*cmd)->GetMethod() == "SetObjectEntry" )
         (*cmd)->Clear();
   }
+
+  // if ( GetAlgoType() == "Cartesian_3D" )
+  // {
+  //   _pyID algo = myCreationCmd->GetObject();
+  //   for ( cmd = myProcessedCmds.begin(); cmd != myProcessedCmds.end(); ++cmd )
+  //   {
+  //     if ( IsWrapped() )
+  //     {
+  //       StructToList( *cmd, /*checkMethod=*/false );
+  //       const _AString & method = (*cmd)->GetMethod();
+  //       if ( method == "SetFixedPoint" )
+  //         (*cmd)->SetObject( algo );
+  //     }
+  //   }
+  // }
 }
 
 //================================================================================
 /*!
  * \brief Convert methods of 1D hypotheses to my own methods
-  * \param theCommand - The called hypothesis method
+ * \param theCommand - The called hypothesis method
  */
 //================================================================================
 
@@ -4249,10 +4279,13 @@ bool _pySelfEraser::CanClear()
   {
     int nbCalls = 0;
     std::list< Handle(_pyCommand) >& cmds = GetProcessedCmds();
-    std::list< Handle(_pyCommand) >::const_iterator cmd = cmds.begin();
-    for ( ; cmd != cmds.end(); ++cmd )
+    std::list< Handle(_pyCommand) >::iterator cmd = cmds.begin();
+    for ( ; cmd != cmds.end();  )
       // check of cmd emptiness is not enough as object can change
-      nbCalls += ( ( *cmd )->GetString().Search( GetID() ) > 0 );
+      if (( *cmd )->GetString().Search( GetID() ) > 0 )
+        ++nbCalls, ++cmd;
+      else
+        cmd = cmds.erase( cmd ); // save the cmd from clearing
 
     toErase = ( nbCalls < 1 );
   }