PR: synchro V7_main tag mergefrom_V6_main_06Mar13

[modules/smesh.git] / src / SMESHGUI / SMESH_msg_en.ts

diff --git a/src/SMESHGUI/SMESH_msg_en.ts b/src/SMESHGUI/SMESH_msg_en.ts
index a92bd040dd0df1ca34fb0ab7a64a1eaa4a163696..ebd89c1da79fb82fa736dd414a027f85a9f549f8 100644 (file)
--- a/src/SMESHGUI/SMESH_msg_en.ts
+++ b/src/SMESHGUI/SMESH_msg_en.ts
@@ -63,6 +63,10 @@
         <source>AREA_ELEMENTS</source>
         <translation>Area</translation>
     </message>
+    <message>
+        <source>MIN_DIAG_ELEMENTS</source>
+        <translation>Minimum diagonal</translation>
+    </message>
     <message>
         <source>ASPECTRATIO_3D_ELEMENTS</source>
         <translation>Aspect Ratio 3D</translation>
@@ -71,18 +75,6 @@
         <source>ASPECTRATIO_ELEMENTS</source>
         <translation>Aspect Ratio</translation>
     </message>
-    <message>
-        <source>NODE_POSITION</source>
-        <translation>Position</translation>
-    </message>
-    <message>
-        <source>U_POSITION</source>
-        <translation>U</translation>
-    </message>
-    <message>
-        <source>V_POSITION</source>
-        <translation>V</translation>
-    </message>
     <message>
         <source>COL_ALGO_HEADER</source>
         <translation>Algorithm</translation>
@@ -1269,6 +1261,10 @@ Please enter correct values and try again</translation>
         <source>SMESH_AUTO_GROUPS</source>
         <translation>Automatically create groups</translation>
     </message>
+    <message>
+        <source>SMESH_REQUIRED_GROUPS</source>
+        <translation>Create groups of required entities</translation>
+    </message>
     <message>
         <source>SMESH_AVAILABLE</source>
         <translation>Available</translation>
@@ -1482,6 +1478,10 @@ so that the application may crash. Do you wish to continue visualization?</trans
     </message>
     <message>
         <source>SMESH_DRS_4</source>
+        <translation type="unfinished">MED file contains some elements in descending connectivity. They were not read.</translation>
+    </message>
+    <message>
+        <source>SMESH_DRS_5</source>
         <translation>The file is incorrect, some data is missed</translation>
     </message>
     <message>
@@ -1828,6 +1828,10 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_LENGTH</source>
         <translation>Length</translation>
     </message>
+    <message>
+        <source>SMESH_LOGARITHMIC_SCALARBAR</source>
+        <translation>Logarithmic</translation>
+    </message>
     <message>
         <source>SMESH_MAKE_GROUPS</source>
         <translation>Generate groups</translation>
@@ -1902,7 +1906,7 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_MERGED_NODES</source>
-        <translation>%1 nodes successfully merged.</translation>
+        <translation>%1 groups of nodes successfully merged.</translation>
     </message>
     <message>
         <source>SMESH_NO_ELEMENTS_DETECTED</source>
@@ -2224,6 +2228,22 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_PRECISION</source>
         <translation>Precision</translation>
     </message>
+    <message>
+        <source>PREF_GROUP_NUMBERING</source>
+        <translation>Numbering</translation>
+    </message>
+    <message>
+        <source>PREF_NUMBERING_NODE</source>
+        <translation>Nodes: Color</translation>
+    </message>
+     <message>
+        <source>PREF_NUMBERING_ELEM</source>
+        <translation>Edges: Color</translation>
+    </message>
+    <message>
+        <source>PREF_NUMBERING_FONT</source>
+        <translation>Font</translation>
+    </message>
     <message>
         <source>SMESH_PREFERENCES_SCALARBAR</source>
         <translation>Scalar Bar Preferences</translation>
@@ -2583,6 +2603,10 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_VISU_PROBLEM</source>
+        <translation>Mesh visualization failed</translation>
+    </message>
+    <message>
+        <source>SMESH_VISU_PROBLEM_MEMORY</source>
         <translation>Mesh visualization failed, probably due to lack of memory</translation>
     </message>
     <message>
@@ -4037,6 +4061,21 @@ Input value precision can be adjusted using
 It can&apos;t be deleted </translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_Dialog</name>
+    <message>
+        <source>DLG_MESH</source>
+        <translation>meshes</translation>
+    </message>
+    <message>
+        <source>DLG_HYPO</source>
+        <translation>hypotheses</translation>
+    </message>
+    <message>
+        <source>DLG_ALGO</source>
+        <translation>algorithms</translation>
+    </message>
+</context>
 <context>
     <name>SMESHGUI</name>
     <message>
@@ -4176,6 +4215,22 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_ELEM_INFO_TREE</source>
         <translation>Tree</translation>
     </message>
+    <message>
+        <source>PREF_ELEM_INFO_GRP_DETAILS</source>
+        <translation>Show details on groups in element information tab</translation>
+    </message>
+    <message>
+        <source>PREF_DUMP_BASE_INFO</source>
+        <translation>Dump base information</translation>
+    </message>
+    <message>
+        <source>PREF_DUMP_ELEM_INFO</source>
+        <translation>Dump element information</translation>
+    </message>
+    <message>
+        <source>PREF_DUMP_ADD_INFO</source>
+        <translation>Dump additional information</translation>
+    </message>
     <message>
         <source>PREF_GPP_NODES_LIMIT</source>
         <translation>Automatic nodes compute limit</translation>
@@ -4579,13 +4634,17 @@ Do you want to restore original submesh priority?</translation>
     </message>
     <message>
         <source>RADIOBTN_1</source>
-        <translation>Convert to quadratic</translation>
+        <translation>Convert to linear</translation>
     </message>
     <message>
         <source>RADIOBTN_2</source>
-        <translation>Convert from quadratic</translation>
+        <translation>Convert to quadratic</translation>
     </message>
-    <message>
+      <message>
+        <source>RADIOBTN_3</source>
+        <translation>Convert to bi-quadratic</translation>
+      </message>
+      <message>
         <source>NON_CONFORM_WARNING</source>
         <translation>Warning: mesh can become non-conformal</translation>
     </message>
@@ -5141,6 +5200,10 @@ Please check input data and try again</translation>
         <source>COPLANAR_FACES</source>
         <translation>Coplanar faces</translation>
     </message>
+  <message>
+    <source>NUMBEROFNODESINELEMENT</source>
+    <translation>Number Of Nodes In Element</translation>
+  </message>
     <message>
         <source>COPY_FROM</source>
         <translation>Copy from...</translation>
@@ -5161,10 +5224,6 @@ Please check input data and try again</translation>
         <source>EDGES</source>
         <translation>Edges</translation>
     </message>
-    <message>
-        <source>ENTITY_TYPE</source>
-        <translation>Entity type</translation>
-    </message>
     <message>
         <source>EQUAL_TO</source>
         <translation>Equal to</translation>
@@ -5312,6 +5371,98 @@ Please enter correct value and try again</translation>
         <source>ELEMENTS</source>
         <translation>Elements</translation>
     </message>
+    <message>
+        <source>ENTITY_TYPE</source>
+        <translation>Entity type</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_0</source>
+        <translation>POINT1</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_2</source>
+        <translation>SEG2</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_3</source>
+        <translation>SEG3</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_4</source>
+        <translation>TRIA3</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_5</source>
+        <translation>TRIA6</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_6</source>
+        <translation>QUAD4</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_7</source>
+        <translation>QUAD8</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_8</source>
+        <translation>QUAD9</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_9</source>
+        <translation>TETRA4</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_10</source>
+        <translation>TETRA10</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_11</source>
+        <translation>PYRA5</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_12</source>
+        <translation>PYRA13</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_13</source>
+        <translation>PENTA6</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_14</source>
+        <translation>PENTA15</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_15</source>
+        <translation>HEXA8</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_16</source>
+        <translation>HEXA20</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_17</source>
+        <translation>HEXA27</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_18</source>
+        <translation>OCTA12</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_19</source>
+        <translation>POLYGONE</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_20</source>
+        <translation>POLYEDRE</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_21</source>
+        <translation>NONE</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_22</source>
+        <translation>BALL</translation>
+    </message>
     <message>
         <source>GEOM_TYPE</source>
         <translation>Geometry type</translation>
@@ -6373,6 +6524,10 @@ as they are of improper type:
 </context>
 <context>
     <name>SMESHGUI_MeshInfo</name>
+    <message>
+        <source>BASE_INFO</source>
+        <translation>Base information</translation>
+    </message>
     <message>
         <source>NAME_LAB</source>
         <translation>Name:</translation>
@@ -6524,6 +6679,18 @@ as they are of improper type:
         <source>ELEM_MODE</source>
         <translation>Element</translation>
     </message>
+    <message>
+        <source>BUT_DUMP_MESH</source>
+        <translation>&amp;Dump</translation>
+    </message>
+    <message>
+        <source>TEXT_FILES</source>
+        <translation>Text files (*.txt)</translation>
+    </message>
+    <message>
+        <source>SAVE_INFO</source>
+        <translation>Save info</translation>
+    </message>
     <message>
         <source>X_FROM_Y_ITEMS_SHOWN</source>
         <translation>%1-%2 from %3 items shown</translation>
@@ -6531,61 +6698,65 @@ as they are of improper type:
 </context>
 <context>
     <name>SMESHGUI_ElemInfo</name>
+    <message>
+        <source>ELEM_INFO</source>
+        <translation>Element information</translation>
+    </message>
     <message>
         <source>COORDINATES</source>
-        <translation>COORDINATES</translation>
+        <translation>Coordinates</translation>
     </message>
     <message>
         <source>CONNECTIVITY</source>
-        <translation>CONNECTIVITY</translation>
+        <translation>Connectivity</translation>
     </message>
     <message>
         <source>GRAVITY_CENTER</source>
-        <translation>GRAVITY CENTER</translation>
+        <translation>Gravity Center</translation>
     </message>
     <message>
         <source>NODE</source>
-        <translation>NODE</translation>
+        <translation>Node</translation>
     </message>
     <message>
         <source>0D_ELEMENT</source>
-        <translation>0D ELEMENT</translation>
+        <translation>0D Element</translation>
     </message>
     <message>
         <source>0D_ELEMENTS</source>
-        <translation>0D ELEMENTS</translation>
+        <translation>0D Elements</translation>
     </message>
     <message>
         <source>BALL_ELEMENT</source>
-        <translation>BALL ELEMENT</translation>
+        <translation>Ball Element</translation>
     </message>
     <message>
         <source>BALL_ELEMENTS</source>
-        <translation>BALL ELEMENTS</translation>
+        <translation>Ball Elements</translation>
     </message>
     <message>
         <source>EDGE</source>
-        <translation>EDGE</translation>
+        <translation>Edge</translation>
     </message>
     <message>
         <source>EDGES</source>
-        <translation>EDGES</translation>
+        <translation>Edges</translation>
     </message>
     <message>
         <source>FACE</source>
-        <translation>FACE</translation>
+        <translation>Face</translation>
     </message>
     <message>
         <source>FACES</source>
-        <translation>FACES</translation>
+        <translation>Faces</translation>
     </message>
     <message>
         <source>VOLUME</source>
-        <translation>VOLUME</translation>
+        <translation>Volume</translation>
     </message>
     <message>
         <source>VOLUMES</source>
-        <translation>VOLUMES</translation>
+        <translation>Volumes</translation>
     </message>
     <message>
         <source>FREE_NODE</source>
@@ -6593,7 +6764,7 @@ as they are of improper type:
     </message>
     <message>
         <source>TYPE</source>
-        <translation>TYPE</translation>
+        <translation>Type</translation>
     </message>
     <message>
         <source>TRIANGLE</source>
@@ -6633,7 +6804,7 @@ as they are of improper type:
     </message>
     <message>
         <source>QUADRATIC</source>
-        <translation>QUADRATIC</translation>
+        <translation>Quadratic</translation>
     </message>
     <message>
         <source>YES</source>
@@ -6643,6 +6814,57 @@ as they are of improper type:
         <source>NO</source>
         <translation>No</translation>
     </message>
+    <message>
+        <source>BALL_DIAMETER</source>
+        <translation>Diameter</translation>
+    </message>
+    <message>
+        <source>GEOM_VERTEX</source>
+        <translation>Vertex</translation>
+    </message>
+    <message>
+        <source>GEOM_EDGE</source>
+        <translation>Edge</translation>
+    </message>
+    <message>
+        <source>GEOM_FACE</source>
+        <translation>Face</translation>
+    </message>
+    <message>
+        <source>GEOM_SOLID</source>
+        <translation>Solid</translation>
+    </message>
+    <message>
+        <source>GEOM_SHELL</source>
+        <translation>Shell</translation>
+    </message>
+    <message>
+        <source>GEOM_SHAPE</source>
+        <translation>Shape</translation>
+    </message>
+    <message>
+        <source>POSITION</source>
+        <translation>Position</translation>
+    </message>
+    <message>
+        <source>U_POSITION</source>
+        <translation>U</translation>
+    </message>
+    <message>
+        <source>V_POSITION</source>
+        <translation>V</translation>
+    </message>
+    <message>
+        <source>CONTROLS</source>
+        <translation>Quality Controls</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_TreeElemInfo</name>
+    <message>
+      <source>SHOW_ITEM_INFO</source>
+      <translation>Show info</translation>
+    </message>
     <message>
         <source>PROPERTY</source>
         <translation>Property</translation>
@@ -6654,6 +6876,10 @@ as they are of improper type:
 </context>
 <context>
     <name>SMESHGUI_AddInfo</name>
+    <message>
+        <source>ADDITIONAL_INFO</source>
+        <translation>Additional information</translation>
+    </message>
     <message>
         <source>NAME</source>
         <translation>Name</translation>