[bos #40653][CEA] New mesh import export formats with meshio.

[modules/smesh.git] / src / SMESHGUI / SMESH_msg_en.ts

diff --git a/src/SMESHGUI/SMESH_msg_en.ts b/src/SMESHGUI/SMESH_msg_en.ts
index f4d1ba390ffb06a9bd63bbca3cdf678f49bed669..5e07a0d3198970ab813b74a0d1b79b95132ebc49 100644 (file)
--- a/src/SMESHGUI/SMESH_msg_en.ts
+++ b/src/SMESHGUI/SMESH_msg_en.ts
@@ -11,10 +11,6 @@
         <source>MED_FILES_FILTER</source>
         <translation>MED files</translation>
     </message>
-    <message>
-        <source>SAUV_FILES_FILTER</source>
-        <translation>SAUV files</translation>
-    </message>
     <message>
         <source>IDEAS_FILES_FILTER</source>
         <translation>IDEAS files</translation>
@@ -99,6 +95,10 @@
         <source>BARE_BORDER_VOLUME</source>
         <translation>Volumes with bare border</translation>
     </message>
+    <message>
+        <source>SCALED_JACOBIAN</source>
+        <translation>Scaled Jacobian</translation>
+    </message>
     <message>
         <source>OVER_CONSTRAINED_VOLUME</source>
         <translation>Over-constrained volumes</translation>
@@ -115,6 +115,10 @@
         <source>ASPECTRATIO_3D_ELEMENTS</source>
         <translation>Aspect Ratio 3D</translation>
     </message>
+    <message>
+        <source>WARPING_3D_ELEMENTS</source>
+        <translation>Warping 3D</translation>
+    </message>
     <message>
         <source>ASPECTRATIO_ELEMENTS</source>
         <translation>Aspect Ratio</translation>
@@ -296,6 +300,10 @@
         <source>MEN_COPY_MESH</source>
         <translation>Copy Mesh</translation>
     </message>
+    <message>
+    <source>MEN_CREATE_DUAL_MESH</source>
+        <translation>Create Dual Mesh</translation>
+    </message>
     <message>
         <source>MEN_CLIP</source>
         <translation>Clipping</translation>
@@ -340,6 +348,130 @@
         <source>MEN_CONSTRUCT_GROUP</source>
         <translation>Construct Group</translation>
     </message>
+    <message>
+        <source>MEN_MG_ADAPT</source>
+        <translation>Remesh with MG_Adapt</translation>
+    </message>
+    <message>
+        <source>MEN_HOMARD_ADAPT</source>
+        <translation>Uniform refinement</translation>
+    </message>
+    <message>
+        <source>Args</source>
+        <translation>Arguments</translation>
+    </message>
+    <message>
+        <source>MeshOut</source>
+        <translation>Mesh Out</translation>
+    </message>
+    <message>
+        <source>MeshIn</source>
+        <translation>Mesh In</translation>
+    </message>
+    <message>
+        <source>MEDFile</source>
+        <translation>MED file</translation>
+    </message>
+    <message>
+        <source>Browser</source>
+        <translation>Browser</translation>
+    </message>
+    <message>
+        <source>Publish_MG_ADAPT</source>
+        <translation>Publish</translation>
+    </message>
+    <message>
+        <source>SIZE_MAP_FIELD</source>
+        <translation>Size map field</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_FIELD_NAME</source>
+        <translation>Field Name</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_MED_FILE_1</source>
+        <translation>This MED file cannot be read.</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_MED_FILE_2</source>
+        <translation>No mesh in this MED file.</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_MED_FILE_3</source>
+        <translation>More than one mesh in this MED file.</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_MED_FILE_4</source>
+        <translation>The mesh in this MED file cannot be read.</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_MED_FILE_5</source>
+        <translation>No field in this MED file.</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_ERROR</source>
+        <translation>Error</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_CH_ST</source>
+        <translation>Chosen time step</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_RANK</source>
+        <translation>Rank</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_TSTP</source>
+        <translation>Time step </translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_NO_T_ST</source>
+        <translation>No time step</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_L_ST</source>
+        <translation>Last time step</translation>
+    </message>
+    <message>
+        <source>MeshName</source>
+        <translation>Mesh name</translation>
+    </message>
+    <message>
+        <source>LOCAL_MG_ADAPT</source>
+        <translation>Local</translation>
+    </message>
+    <message>
+        <source>BACKGRND_MG_ADAPT</source>
+        <translation>Background</translation>
+    </message>
+    <message>
+        <source>CNST_MG_ADAPT</source>
+        <translation>Constant</translation>
+    </message>
+    <message>
+        <source>MED_FILE_BCKG</source>
+        <translation>MED file background size map</translation>
+    </message>
+    <message>
+        <source>VALUE_MG_ADAPT</source>
+        <translation>Value</translation>
+    </message>
+    <message>
+        <source>SIZE_MAP_DEF</source>
+        <translation>Size map definition</translation>
+    </message>
+    <message>
+        <source>ADVOP</source>
+        <translation>Advanced Options</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_DIAG_1</source>
+        <translation>Adaptation succeeded.</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_DIAG_2</source>
+        <translation>Adaptation failed.</translation>
+    </message>
     <message>
         <source>MEN_CONV_TO_QUAD</source>
         <translation>Convert to/from quadratic</translation>
@@ -348,6 +480,10 @@
         <source>MEN_2D_FROM_3D</source>
         <translation>Create boundary elements</translation>
     </message>
+    <message>
+        <source>MEN_2D_FROM_3D_ELEMENTS</source>
+        <translation>Create 2D mesh from 3D elements</translation>
+    </message>
     <message>
         <source>MEN_MESH_ORDER</source>
         <translation>Change sub-mesh priority</translation>
@@ -528,10 +664,6 @@
         <source>MEN_EXPORT_GMF</source>
         <translation>Export to GMF file</translation>
     </message>
-    <message>
-        <source>MEN_EXPORT_SAUV</source>
-        <translation>Export to SAUV file</translation>
-    </message>
     <message>
         <source>MEN_EXPORT_STL</source>
         <translation>Export to STL file</translation>
@@ -757,12 +889,12 @@
         <translation>GMF file</translation>
     </message>
     <message>
-        <source>MEN_IMPORT_SAUV</source>
-        <translation>SAUV file</translation>
+        <source>MEN_IMPORT_MESHIO</source>
+        <translation>other formats... (meshio)</translation>
     </message>
     <message>
-        <source>MEN_SAUV</source>
-        <translation>SAUV file</translation>
+        <source>MEN_EXPORT_MESHIO</source>
+        <translation>other formats... (meshio)</translation>
     </message>
     <message>
         <source>MEN_MERGE</source>
@@ -780,6 +912,18 @@
         <source>MEN_MESH_THROU_POINT</source>
         <translation>Move Node</translation>
     </message>
+    <message>
+        <source>MEN_MOVE_NODE_INTRCT</source>
+        <translation>Move node by mouse</translation>
+    </message>
+    <message>
+        <source>MEN_SPLIT_DIAG_INTRC</source>
+        <translation>Add node on segment</translation>
+    </message>
+    <message>
+        <source>MEN_SPLIT_FACE_INTRC</source>
+        <translation>Add node to triangle</translation>
+    </message>
     <message>
         <source>MEN_MIN_ANG</source>
         <translation>Minimum Angle</translation>
@@ -788,6 +932,10 @@
         <source>MEN_MODIFY</source>
         <translation>Modification</translation>
     </message>
+    <message>
+        <source>MEN_ADAPT</source>
+        <translation>Adaptation</translation>
+    </message>
     <message>
         <source>MEN_MEASURE</source>
         <translation>Measurements</translation>
@@ -968,6 +1116,10 @@
         <source>MEN_REMOVE_NODES</source>
         <translation>Nodes</translation>
     </message>
+    <message>
+        <source>MEN_REMOVE_NODE_RECON</source>
+        <translation>Node with reconnection</translation>
+    </message>
     <message>
         <source>MEN_REMOVE_ORPHAN_NODES</source>
         <translation>Orphan Nodes</translation>
@@ -1184,10 +1336,18 @@
         <source>MEN_VOLUME_3D</source>
         <translation>Volume</translation>
     </message>
+    <message>
+        <source>MEN_SCALED_JACOBIAN</source>
+        <translation>Scaled Jacobian</translation>
+    </message>
     <message>
         <source>MEN_WARP</source>
         <translation>Warping Angle</translation>
     </message>
+    <message>
+        <source>MEN_WARP_3D</source>
+        <translation>Warping 3D</translation>
+    </message>
     <message>
         <source>MEN_WHAT_IS</source>
         <translation>Mesh Element Information</translation>
@@ -1490,6 +1650,10 @@ Please enter correct values and try again</translation>
         <source>SMESH_AUTO_DIM</source>
         <translation>Automatically define space dimension</translation>
     </message>
+    <message>
+        <source>SMESH_MED_SAVE_NUMS</source>
+        <translation>Export indices</translation>
+    </message>
     <message>
         <source>SMESH_ZTOLERANCE</source>
         <translation>Z tolerance</translation>
@@ -1502,6 +1666,10 @@ Please enter correct values and try again</translation>
         <source>SMESH_AVAILABLE</source>
         <translation>Available</translation>
     </message>
+    <message>
+        <source>SMESH_NOT_AVAILABLE</source>
+        <translation>Not available</translation>
+    </message>
     <message>
         <source>SMESH_AVAILABLE_ALGORITHMS</source>
         <translation>Available algorithms</translation>
@@ -1811,6 +1979,10 @@ so that the application may crash. Do you wish to continue visualization?</trans
 Probably, there is not enough space on disk, or the version of MED file used is not compatible with the mesh.
 </translation>
     </message>
+    <message>
+        <source>SMESH_EXPORT_FAILED_SHORT</source>
+        <translation>Mesh export failed.</translation>
+    </message>
     <message>
         <source>SMESH_EXPORT_MED_DUPLICATED_GRP</source>
         <translation>There are duplicated group names in mesh &quot;%1&quot;.
@@ -1842,6 +2014,22 @@ Overwrite the file?</translation>
 meshes with the following names: %1
 The result file may be incorrect.
 Overwrite the file?</translation>
+    </message>
+    <message>
+        <source>SMESH_EXPORT_MESHIO_ONLY_MESH</source>
+        <translation>Current implementation uses export through intermediate MED file.
+However, meshio does not support reading MED files with more than one mesh.
+Selected meshes will be saved into separated files.
+
+Do you want to continue?</translation>
+    </message>
+    <message>
+        <source>SMESH_MESHIO_NOT_INSTALLED</source>
+        <translation>Meshio is not installed!
+Operation will be canceled.
+
+Try to install meshio with a command:
+pip install meshio[all]</translation>
     </message>
     <message>
         <source>EXPORT_NOT_SUPPORTED</source>
@@ -2084,6 +2272,14 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_LOGARITHMIC_SCALARBAR</source>
         <translation>Logarithmic</translation>
     </message>
+    <message>
+        <source>SMESH_TRESHOLD_SCALARBAR</source>
+        <translation>Threshold</translation>
+    </message>
+    <message>
+        <source>SMESH_WIREFRAME_OFF_SCALARBAR</source>
+        <translation>Wireframe Off</translation>
+    </message>
     <message>
         <source>SMESH_MAKE_GROUPS</source>
         <translation>Generate groups</translation>
@@ -2712,6 +2908,10 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_RENUMBERING</source>
         <translation>Renumbering</translation>
     </message>
+    <message>
+        <source>SMESH_RENUMBER</source>
+        <translation>Renumber</translation>
+    </message>
     <message>
         <source>SMESH_RENUMBERING_ELEMENTS_TITLE</source>
         <translation>Renumbering elements</translation>
@@ -2897,6 +3097,86 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_MULTICOLOR</source>
         <translation>Multicolor</translation>
     </message>
+    <message>
+        <source>ADAPT_PREF_TAB_GENERAL</source>
+        <translation>Adaptation</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_NONE</source>
+        <translation>None</translation>
+    </message>
+    <message>
+        <source>ADAPT_WITH_HOMARD</source>
+        <translation>Adaptation with HOMARD</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT</source>
+        <translation>Adaptation with MG-Adapt</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_FILE_MAILLAGE_OUT</source>
+        <translation>Write the OUT mesh</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_PUBLICATION_MAILLAGE_OUT</source>
+        <translation>Publication of the OUT mesh</translation>
+    </message>
+    <message>
+        <source>OPTION_VALUE_COLUMN</source>
+        <translation>Option</translation>
+    </message>
+    <message>
+        <source>OPTION_NAME_COLUMN</source>
+        <translation>Value</translation>
+    </message>
+    <message>
+        <source>compute_ridges</source>
+        <translation>Compute ridges</translation>
+    </message>
+    <message>
+        <source>max_memory</source>
+        <translation>Maximum memory (Mb)</translation>
+    </message>
+    <message>
+        <source>Adaption</source>
+        <translation>adaptation</translation>
+    </message>
+    <message>
+        <source>components</source>
+        <translation>Components</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_SIZE_MAP</source>
+        <translation>Size map</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_SIZE_MAP_LOCAL</source>
+        <translation>Local</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_SIZE_MAP_BACKGROUND</source>
+        <translation>Background</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_TIME_STEP_LAST</source>
+        <translation>Last</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_TIME_STEP</source>
+        <translation>Choosen time step</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_TIME_STEP_C</source>
+        <translation>Value</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_SELECT_FILE_0</source>
+        <translation>MG-ADAPT select file</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_ADVOP</source>
+        <translation>Advanced Options</translation>
+    </message>
     <message>
         <source>SMESH_VISU_PROBLEM</source>
         <translation>Mesh visualization failed</translation>
@@ -3020,6 +3300,10 @@ Use Display Entity menu command to show them.
         <source>SMESH_Z</source>
         <translation>Z</translation>
     </message>
+    <message>
+        <source>SMESH_Z_SCALARBAR</source>
+        <translation>Z:</translation>
+    </message>
     <message>
         <source>STATE_ALGO_MISSING</source>
         <translation>%3 %2D algorithm is missing</translation>
@@ -3076,6 +3360,10 @@ Use Display Entity menu command to show them.
         <source>STB_COPY_MESH</source>
         <translation>Copy Mesh</translation>
     </message>
+    <message>
+        <source>STB_CREATE_DUAL_MESH</source>
+        <translation>Create Dual Mesh</translation>
+    </message>
     <message>
         <source>STB_CLIP</source>
         <translation>Clipping</translation>
@@ -3088,6 +3376,10 @@ Use Display Entity menu command to show them.
         <source>STB_COMPUTE</source>
         <translation>Compute</translation>
     </message>
+    <message>
+        <source>STB_RE_COMPUTE</source>
+        <translation>Clear + Compute</translation>
+    </message>
     <message>
         <source>STB_COMPUTE_SUBMESH</source>
         <translation>Compute Sub-mesh</translation>
@@ -3112,6 +3404,14 @@ Use Display Entity menu command to show them.
         <source>STB_CONSTRUCT_GROUP</source>
         <translation>Construct Group</translation>
     </message>
+    <message>
+        <source>STB_MG_ADAPT</source>
+        <translation>Remesh with MG_Adapt</translation>
+    </message>
+    <message>
+        <source>STB_HOMARD_ADAPT</source>
+        <translation>Uniform refinement</translation>
+    </message>
     <message>
         <source>STB_CONV_TO_QUAD</source>
         <translation>Convert to/from quadratic</translation>
@@ -3120,6 +3420,10 @@ Use Display Entity menu command to show them.
         <source>STB_2D_FROM_3D</source>
         <translation>Create boundary elements</translation>
     </message>
+    <message>
+        <source>STB_2D_FROM_3D_ELEMENTS</source>
+        <translation>Create 2D mesh from 3D elements</translation>
+    </message>
     <message>
         <source>STB_MESH_ORDER</source>
         <translation>Change sub-mesh priority</translation>
@@ -3248,10 +3552,6 @@ Use Display Entity menu command to show them.
         <source>STB_EXPORT_GMF</source>
         <translation>Export to GMF file</translation>
     </message>
-    <message>
-        <source>STB_EXPORT_SAUV</source>
-        <translation>Export to SAUV file</translation>
-    </message>
     <message>
         <source>STB_EXPORT_STL</source>
         <translation>Export to STL file</translation>
@@ -3384,14 +3684,6 @@ Use Display Entity menu command to show them.
         <source>STB_GMF</source>
         <translation>Export GMF file</translation>
     </message>
-    <message>
-        <source>STB_IMPORT_SAUV</source>
-        <translation>Import SAUV file</translation>
-    </message>
-    <message>
-        <source>STB_SAUV</source>
-        <translation>Export SAUV file</translation>
-    </message>
     <message>
         <source>STB_MERGE</source>
         <translation>Merge nodes</translation>
@@ -3404,6 +3696,18 @@ Use Display Entity menu command to show them.
         <source>STB_MESH_THROU_POINT</source>
         <translation>Move Node</translation>
     </message>
+    <message>
+        <source>STB_MOVE_NODE_INTRCT</source>
+        <translation>Move Node by mouse</translation>
+    </message>
+    <message>
+        <source>STB_SPLIT_DIAG_INTRC</source>
+        <translation>Add node on segment</translation>
+    </message>
+    <message>
+        <source>STB_SPLIT_FACE_INTRC</source>
+        <translation>Add node to triangle</translation>
+    </message>
     <message>
         <source>STB_MIN_ANG</source>
         <translation>Minimum Angle</translation>
@@ -3492,6 +3796,10 @@ Use Display Entity menu command to show them.
         <source>STB_REMOVE_NODES</source>
         <translation>Remove nodes</translation>
     </message>
+    <message>
+        <source>STB_REMOVE_NODE_RECON</source>
+        <translation>Remove node with reconnection</translation>
+    </message>
     <message>
         <source>STB_REMOVE_ORPHAN_NODES</source>
         <translation>Remove orphan nodes</translation>
@@ -3656,10 +3964,18 @@ Use Display Entity menu command to show them.
         <source>STB_VOLUME_3D</source>
         <translation>Volume</translation>
     </message>
+    <message>
+        <source>STB_SCALED_JACOBIAN</source>
+        <translation>Scaled Jacobian</translation>
+    </message>
     <message>
         <source>STB_WARP</source>
         <translation>Warping angle</translation>
     </message>
+    <message>
+        <source>STB_WARP_3D</source>
+        <translation>Warping angle</translation>
+    </message>
     <message>
         <source>STB_WHAT_IS</source>
         <translation>Show information about the mesh node or element</translation>
@@ -3688,6 +4004,10 @@ Use Display Entity menu command to show them.
         <source>TB_RENUMBER</source>
         <translation>Renumbering Toolbar</translation>
     </message>
+    <message>
+        <source>TB_INTERACT</source>
+        <translation>Interactive modifications Toolbar</translation>
+    </message>
     <message>
         <source>TB_TRANSFORM</source>
         <translation>Transformation Toolbar</translation>
@@ -3708,6 +4028,10 @@ Use Display Entity menu command to show them.
         <source>TB_CTRL3D</source>
         <translation>Volume Controls Toolbar</translation>
     </message>
+    <message>
+        <source>TB_ADAPTATION</source>
+        <translation>Adaptation Toolbar</translation>
+    </message>
     <message>
         <source>TB_MEASUREM</source>
         <translation>Measurements Toolbar</translation>
@@ -3788,6 +4112,10 @@ Use Display Entity menu command to show them.
         <source>TOP_COMPUTE</source>
         <translation>Compute</translation>
     </message>
+    <message>
+        <source>TOP_RE_COMPUTE</source>
+        <translation>Clear + Compute</translation>
+    </message>
     <message>
         <source>TOP_COMPUTE_SUBMESH</source>
         <translation>Compute Sub-mesh</translation>
@@ -3812,6 +4140,14 @@ Use Display Entity menu command to show them.
         <source>TOP_CONSTRUCT_GROUP</source>
         <translation>Construct Group</translation>
     </message>
+    <message>
+        <source>TOP_MG_ADAPT</source>
+        <translation>Remesh with MG_Adapt</translation>
+    </message>
+    <message>
+        <source>TOP_HOMARD_ADAPT</source>
+        <translation>Uniform refinement</translation>
+    </message>
     <message>
         <source>TOP_CONV_TO_QUAD</source>
         <translation>Convert to/from quadratic</translation>
@@ -3820,6 +4156,10 @@ Use Display Entity menu command to show them.
         <source>TOP_2D_FROM_3D</source>
         <translation>Create boundary elements</translation>
     </message>
+    <message>
+        <source>TOP_2D_FROM_3D_ELEMENTS</source>
+        <translation>Create 2D mesh from 3D elements</translation>
+    </message>
     <message>
         <source>TOP_MESH_ORDER</source>
         <translation>Change sub-mesh priority</translation>
@@ -3940,10 +4280,6 @@ Use Display Entity menu command to show them.
         <source>TOP_EXPORT_MED</source>
         <translation>Export to MED file</translation>
     </message>
-    <message>
-        <source>TOP_EXPORT_SAUV</source>
-        <translation>Export to SAUV file</translation>
-    </message>
     <message>
         <source>TOP_EXPORT_STL</source>
         <translation>Export to STL file</translation>
@@ -4076,14 +4412,6 @@ Use Display Entity menu command to show them.
         <source>TOP_GMF</source>
         <translation>Export GMF file</translation>
     </message>
-    <message>
-        <source>TOP_IMPORT_SAUV</source>
-        <translation>Import SAUV file</translation>
-    </message>
-    <message>
-        <source>TOP_SAUV</source>
-        <translation>Export SAUV file</translation>
-    </message>
     <message>
         <source>TOP_MERGE</source>
         <translation>Merge nodes</translation>
@@ -4096,6 +4424,18 @@ Use Display Entity menu command to show them.
         <source>TOP_MESH_THROU_POINT</source>
         <translation>Move Node</translation>
     </message>
+    <message>
+        <source>TOP_MOVE_NODE_INTRCT</source>
+        <translation>Move node by mouse</translation>
+    </message>
+    <message>
+        <source>TOP_SPLIT_DIAG_INTRC</source>
+        <translation>Add node on segment</translation>
+    </message>
+    <message>
+        <source>TOP_SPLIT_FACE_INTRC</source>
+        <translation>Add node to triangle</translation>
+    </message>
     <message>
         <source>TOP_MIN_ANG</source>
         <translation>Minimum Angle</translation>
@@ -4184,6 +4524,10 @@ Use Display Entity menu command to show them.
         <source>TOP_REMOVE_NODES</source>
         <translation>Remove nodes</translation>
     </message>
+    <message>
+        <source>TOP_REMOVE_NODE_RECON</source>
+        <translation>Remove node with reconnection</translation>
+    </message>
     <message>
         <source>TOP_REMOVE_ORPHAN_NODES</source>
         <translation>Remove orphan nodes</translation>
@@ -4344,10 +4688,18 @@ Use Display Entity menu command to show them.
         <source>TOP_VOLUME_3D</source>
         <translation>Volume</translation>
     </message>
+    <message>
+        <source>TOP_SCALED_JACOBIAN</source>
+        <translation>Scaled Jacobian</translation>
+    </message>
     <message>
         <source>TOP_WARP</source>
         <translation>Warping angle</translation>
     </message>
+    <message>
+        <source>TOP_WARP_3D</source>
+        <translation>Warping 3D</translation>
+    </message>
     <message>
         <source>TOP_WHAT_IS</source>
         <translation>Mesh Element Information</translation>
@@ -4372,6 +4724,10 @@ Use Display Entity menu command to show them.
         <source>WARP_ELEMENTS</source>
         <translation>Warping</translation>
     </message>
+    <message>
+        <source>WARP_3D_ELEMENTS</source>
+        <translation>Warping 3D</translation>
+    </message>
     <message>
         <source>MEN_FILE_INFO</source>
         <translation>File Information</translation>
@@ -4443,8 +4799,8 @@ Use Display Entity menu command to show them.
     <message>
         <source>FULL_RECOMPUTE_QUESTION</source>
         <translation>
-The mesh has been edited since a last total re-compute 
-that may prevent successful computation. 
+The mesh has been edited since a last total re-compute
+that may prevent successful computation.
 Do you wish to re-compute the mesh totally to discard the modifications?
 </translation>
     </message>
@@ -4669,6 +5025,10 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_SHOW_WARN</source>
         <translation>Show warning when exporting group</translation>
     </message>
+    <message>
+        <source>PREF_MED_SAVE_NUMS</source>
+        <translation>Save cell/node numbers to MED file</translation>
+    </message>
     <message>
         <source>PREF_ZTOLERANCE</source>
         <translation>Z tolerance for MED export</translation>
@@ -5029,6 +5389,74 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_PREVIEW_CHUNK_SIZE</source>
         <translation>Sub-shapes preview chunk size</translation>
     </message>
+    <message>
+        <source>INFO_WELCOME_TO_SMESH</source>
+        <translation>Welcome to Mesh</translation>
+    </message>
+    <message>
+        <source>INFO_GRP_CREATE_MESH</source>
+        <translation>Create mesh</translation>
+    </message>
+    <message>
+        <source>INFO_DEFINE_ALGOS</source>
+        <translation>Choose algorithms</translation>
+    </message>
+    <message>
+        <source>INFO_DEFINE_HYPOS</source>
+        <translation>Define hypotheses</translation>
+    </message>
+    <message>
+        <source>INFO_COMPUTE</source>
+        <translation>Compute</translation>
+    </message>
+    <message>
+        <source>INFO_REFINE</source>
+        <translation>Add refinements</translation>
+    </message>
+    <message>
+        <source>INFO_REFINE_LOCAL_SIZE</source>
+        <translation>via local sizes with some hypotheses</translation>
+    </message>
+    <message>
+        <source>INFO_REFINE_SUBMESH</source>
+        <translation>via sub-meshes</translation>
+    </message>
+    <message>
+        <source>INFO_GRP_IMPORT_MESH</source>
+        <translation>Import mesh</translation>
+    </message>
+    <message>
+        <source>INFO_AVAILABLE_FORMATS</source>
+        <translation>Available formats</translation>
+    </message>
+    <message>
+        <source>INFO_GRP_CHECK_MESH</source>
+        <translation> Check mesh quality</translation>
+    </message>
+    <message>
+        <source>INFO_DISPLAY</source>
+        <translation>Display mesh</translation>
+    </message>
+    <message>
+        <source>INFO_QUALITY_INFO</source>
+        <translation>Display some quality criteria</translation>
+    </message>
+    <message>
+        <source>INFO_QUALITY_AREA</source>
+        <translation>area</translation>
+    </message>
+    <message>
+        <source>INFO_QUALITY_VOLUME</source>
+        <translation>volume</translation>
+    </message>
+    <message>
+        <source>INFO_QUALITY_ASPECT_RATION</source>
+        <translation>aspect ration</translation>
+    </message>
+    <message>
+        <source>INFO_CLIPPING</source>
+        <translation>Add clipping planes</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_GroupDlg</name>
@@ -5343,6 +5771,29 @@ Please specify it and try again</translation>
         <translation>Warning: mesh can become non-conformal</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_CreateDualMeshDlg</name>
+    <message>
+        <source>CAPTION</source>
+        <translation>Create Dual Mesh</translation>
+    </message>
+    <message>
+        <source>MESH</source>
+        <translation>Mesh or Sub-mesh</translation>
+    </message>
+    <message>
+        <source>NON_TETRA_MESH_WARNING</source>
+        <translation>Warning: mesh must have only Tetrahedron 3D elements</translation>
+    </message>
+    <message>
+        <source>DUAL_MESH_NAME</source>
+        <translation>Name of the dual mesh</translation>
+    </message>
+    <message>
+        <source>PROJ_SHAPE</source>
+        <translation>Project boundary elements on shape</translation>
+    </message>
+</context>
 <context>
     <name>SMESHGUI_ConvToQuadOp</name>
     <message>
@@ -5894,6 +6345,10 @@ Please check input data and try again</translation>
         <source>ASPECT_RATIO_3D</source>
         <translation>Aspect ratio 3D</translation>
     </message>
+    <message>
+        <source>WARPING_3D</source>
+        <translation>Warping 3D</translation>
+    </message>
     <message>
         <source>BAD_ORIENTED_VOLUME</source>
         <translation>Bad oriented volume</translation>
@@ -6121,6 +6576,10 @@ Please enter correct value and try again</translation>
         <source>VOLUME_3D</source>
         <translation>Volume</translation>
     </message>
+    <message>
+        <source>SCALED_JACOBIAN</source>
+        <translation>Scaled Jacobian</translation>
+    </message>
     <message>
         <source>WARPING</source>
         <translation>Warping</translation>
@@ -6429,6 +6888,10 @@ Please specify them and try again</translation>
         <source>DESTINATION</source>
         <translation>Destination</translation>
     </message>
+    <message>
+        <source>DESTINATION_BY_MOUSE</source>
+        <translation>Destination by mouse click</translation>
+    </message>
     <message>
         <source>MOVE_NODE</source>
         <translation>Move node</translation>
@@ -6457,6 +6920,120 @@ Please specify them and try again</translation>
         <translation>Mesh to modify not selected</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_AddNodeOnSegmentDlg</name>
+    <message>
+        <source>CAPTION</source>
+        <translation>Add node to segment</translation>
+    </message>
+    <message>
+        <source>SEGMENT_GROUP</source>
+        <translation>Edge between neighboring triangles</translation>
+    </message>
+    <message>
+        <source>SEGMENT</source>
+        <translation>Edge</translation>
+    </message>
+    <message>
+        <source>POSITION_GROUP</source>
+        <translation>Node on Edge</translation>
+    </message>
+    <message>
+        <source>POSITION</source>
+        <translation>Location by mouse click</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_AddNodeOnSegmentOp</name>
+    <message>
+        <source>INVALID_EDGE</source>
+        <translation>Edge is invalid</translation>
+    </message>
+    <message>
+        <source>INVALID_MESH</source>
+        <translation>Mesh to modify not selected</translation>
+    </message>
+    <message>
+        <source>NO_ELEMENTS</source>
+        <translation>Edge belongs to none face</translation>
+    </message>
+    <message>
+        <source>VOLUME_FOUND</source>
+        <translation>Can't split an edge of a volume</translation>
+    </message>
+    <message>
+        <source>NOT_TRIANGLE_FACE_FOUND</source>
+        <translation>Operation applies to triangles only</translation>
+    </message>
+    <message>
+        <source>BAD_POSITION</source>
+        <translation>Position on edge is incorrect</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_AddNodeOnFaceDlg</name>
+    <message>
+        <source>CAPTION</source>
+        <translation>Add node to triangle</translation>
+    </message>
+    <message>
+        <source>FACE_GROUP</source>
+        <translation>Triangle to split</translation>
+    </message>
+    <message>
+        <source>FACE_ID</source>
+        <translation>ID</translation>
+    </message>
+    <message>
+        <source>XYZ_GROUP</source>
+        <translation>Node location by mouse click</translation>
+    </message>
+    <message>
+        <source>XYZ_NODE_ON_FACE</source>
+        <translation>Node on face</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_AddNodeOnFaceOp</name>
+    <message>
+        <source>INVALID_MESH</source>
+        <translation>Mesh to modify not selected</translation>
+    </message>
+    <message>
+        <source>NOT_FACE</source>
+        <translation>Not a face selected</translation>
+    </message>
+    <message>
+        <source>INVALID_ID</source>
+        <translation>Face ID is invalid</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_RemoveNodeReconnectionDlg</name>
+    <message>
+        <source>CAPTION</source>
+        <translation>Remove Node with Reconnection</translation>
+    </message>
+    <message>
+        <source>NODE_2REMOVE_ID</source>
+        <translation>ID</translation>
+    </message>
+    <message>
+        <source>NODE_2REMOVE</source>
+        <translation>Node</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_RemoveNodeReconnectionOp</name>
+    <message>
+        <source>INVALID_ID</source>
+        <translation>Node ID is invalid</translation>
+    </message>
+    <message>
+        <source>INVALID_MESH</source>
+        <translation>Mesh to modify not selected</translation>
+    </message>
+</context>
 <context>
     <name>SMESHGUI_FindElemByPointDlg</name>
     <message>
@@ -6569,7 +7146,7 @@ Please specify them and try again</translation>
     <message>
         <source>GEOMETRY_OBJECT_IS_NOT_DEFINED_MESH</source>
         <translation>Geometry object is not defined.
-Do you want to create an empty mesh 
+Do you want to create an empty mesh
 without algorithms and hypotheses? </translation>
     </message>
     <message>
@@ -6644,7 +7221,7 @@ select mesh or sub-mesh and try again</translation>
     <message>
         <source>CONCURRENT_SUBMESH_APPEARS</source>
         <translation>
-The assigned algorithm has the same priority as one assigned to an 
+The assigned algorithm has the same priority as one assigned to an
 adjacent sub-mesh, hence it&apos;s undefined which algorithm to use for
 meshing boundary shared by two sub-meshes. Would you like to set
 the order of sub-mesh computation? </translation>
@@ -7391,6 +7968,17 @@ It is impossible to read point coordinates from file</translation>
         <translation>Generate</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_MakeFull2DFrom3DDlg</name>
+    <message>
+        <source>CAPTION</source>
+        <translation>Create 2D mesh from 3D elements</translation>
+    </message>
+    <message>
+        <source>2D_FROM_3D_ELEMENTS</source>
+        <translation>2D from 3D</translation>
+    </message>
+</context>    
 <context>
     <name>SMESHGUI_Make2DFrom3DDlg</name>
     <message>
@@ -7442,6 +8030,43 @@ It is impossible to read point coordinates from file</translation>
         <translation>Create group</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_MakeFull2DFrom3DOp</name>
+    <message>
+        <source>NB_ADDED</source>
+        <translation>%1 boundary elements have been added</translation>
+    </message>
+    <message>
+        <source>WRONG_GROUPS</source>
+        <translation>The following groups have not been processed
+as they are of improper type:
+%1</translation>
+    </message>
+    <message>
+        <source>SMESH_ERR_NO_INPUT_MESH</source>
+        <translation>Source mesh is not specified</translation>
+    </message>
+    <message>
+        <source>SMESH_TOO_MANY_MESHES</source>
+        <translation>Only one mesh can be processed at once</translation>
+    </message>
+    <message>
+        <source>SMESH_NOT_ONLY_GROUPS</source>
+        <translation>Can&apos;t process meshes and groups at once</translation>
+    </message>
+    <message>
+        <source>SMESH_ERR_NO_3D_ELEMENTS</source>
+        <translation>The source objects do not contain 3D elements</translation>
+    </message>
+    <message>
+        <source>SMESH_ERR_MESH_NAME_NOT_SPECIFIED</source>
+        <translation>New mesh name is not specified</translation>
+    </message>
+    <message>
+        <source>SMESH_ERR_GRP_NAME_NOT_SPECIFIED</source>
+        <translation>Group name is not specified</translation>
+    </message>
+</context>
 <context>
     <name>SMESHGUI_Make2DFrom3DOp</name>
     <message>
@@ -8254,7 +8879,7 @@ as they are of improper type:
     <message>
         <source>SUBSHAPES_NOT_FOUND_MSG</source>
         <translation>
-Some sub-shapes not found in the new geometry. They are listed 
+Some sub-shapes not found in the new geometry. They are listed
 below along with dependent mesh objects that are marked with
 red in the Object Browser.</translation>
     </message>
@@ -8353,6 +8978,10 @@ red in the Object Browser.</translation>
         <source>OBJECT</source>
         <translation>Object</translation>
     </message>
+     <message>
+         <source>OBJECTS</source>
+         <translation>Objects</translation>
+     </message>
     <message>
         <source>POINT</source>
         <translation>Point</translation>
@@ -8373,6 +9002,10 @@ red in the Object Browser.</translation>
         <source>VOLUMES</source>
         <translation>Volumes</translation>
     </message>
+    <message>
+        <source>REF_GROUPS</source>
+        <translation>Ref. objects (optional)</translation>
+    </message>
     <message>
         <source>OUTSIDE_VOLUME_NORMAL</source>
         <translation>Face normal outside volume</translation>