Merge branch 'OCCT780'

[modules/smesh.git] / src / SMESHGUI / SMESH_msg_en.ts
diff --git a/src/SMESHGUI/SMESH_msg_en.ts b/src/SMESHGUI/SMESH_msg_en.ts

index e989562ed2709af2f56e4b19746b636d2a855ed6..7d40dd11310cf7f3bc2897d1f9ce46bceac8d4e4 100644 (file)
--- a/src/SMESHGUI/SMESH_msg_en.ts
+++ b/src/SMESHGUI/SMESH_msg_en.ts
@@ -39,6 +39,10 @@
          <source>CGNS_FILES_FILTER</source>
          <translation>CGNS files</translation>
      </message>
+    <message>
+        <source>CGNS_EXPORT_ELEMS_BY_TYPE</source>
+        <translation>Group elements by type</translation>
+    </message>
      <message>
          <source>GMF_ASCII_FILES_FILTER</source>
          <translation>GMF ASCII files</translation>
@@ -63,14 +67,58 @@
          <source>AREA_ELEMENTS</source>
          <translation>Area</translation>
      </message>
+    <message>
+        <source>FREE_NODES</source>
+        <translation>Free nodes</translation>
+    </message>
+    <message>
+        <source>NODE_CONNECTIVITY_NB</source>
+        <translation>Node connectivity number</translation>
+    </message>
+    <message>
+        <source>FREE_EDGES</source>
+        <translation>Free edges</translation>
+    </message>
+    <message>
+        <source>FREE_FACES</source>
+        <translation>Free faces</translation>
+    </message>
+    <message>
+        <source>BARE_BORDER_FACE</source>
+        <translation>Faces with bare border</translation>
+    </message>
+    <message>
+        <source>OVER_CONSTRAINED_FACE</source>
+        <translation>Over-constrained faces</translation>
+    </message>
+    <message>
+        <source>BARE_BORDER_VOLUME</source>
+        <translation>Volumes with bare border</translation>
+    </message>
+    <message>
+        <source>SCALED_JACOBIAN</source>
+        <translation>Scaled Jacobian</translation>
+    </message>
+    <message>
+        <source>OVER_CONSTRAINED_VOLUME</source>
+        <translation>Over-constrained volumes</translation>
+    </message>
      <message>
          <source>MIN_DIAG_ELEMENTS</source>
          <translation>Minimum diagonal</translation>
      </message>
+    <message>
+        <source>MIN_ELEM_EDGE</source>
+        <translation>Minimum Edge Length</translation>
+    </message>
      <message>
          <source>ASPECTRATIO_3D_ELEMENTS</source>
          <translation>Aspect Ratio 3D</translation>
      </message>
+    <message>
+        <source>WARPING_3D_ELEMENTS</source>
+        <translation>Warping 3D</translation>
+    </message>
      <message>
          <source>ASPECTRATIO_ELEMENTS</source>
          <translation>Aspect Ratio</translation>
@@ -139,10 +187,14 @@
          <source>COMPERR_NO_MESH_ON_SHAPE</source>
          <translation>No mesh elements assigned to a Sub-shape</translation>
      </message>
+    <message>
+        <source>COMPERR_BAD_PARMETERS</source>
+        <translation>Invalid input parameters</translation>
+    </message>
      <message>
          <source>EDITERR_NO_MEDIUM_ON_GEOM</source>
          <translation>Some medium nodes not placed on geometry to avoid
-        distorting elements shown in magenta</translation>
+        distorting elements shown in magenta.</translation>
      </message>
      <message>
          <source>SMESH_GEOM</source>
@@ -184,6 +236,10 @@
          <source>LENGTH2D_EDGES</source>
          <translation>Length 2D</translation>
      </message>
+    <message>
+        <source>DEFLECTION2D_FACES</source>
+        <translation>Deflection 2D</translation>
+    </message>
      <message>
          <source>LENGTH_EDGES</source>
          <translation>Length</translation>
@@ -200,6 +256,10 @@
          <source>MAX_ELEMENT_LENGTH_3D</source>
          <translation>Element Diameter 3D</translation>
      </message>
+    <message>
+        <source>DEFLECTION_2D</source>
+        <translation>Deflection 2D</translation>
+    </message>
      <message>
          <source>MEN_ADD</source>
          <translation>Add</translation>
@@ -240,6 +300,10 @@
          <source>MEN_COPY_MESH</source>
          <translation>Copy Mesh</translation>
      </message>
+    <message>
+    <source>MEN_CREATE_DUAL_MESH</source>
+        <translation>Create Dual Mesh</translation>
+    </message>
      <message>
          <source>MEN_CLIP</source>
          <translation>Clipping</translation>
@@ -252,6 +316,18 @@
          <source>MEN_COMPUTE</source>
          <translation>Compute</translation>
      </message>
+    <message>
+        <source>MEN_RE_COMPUTE</source>
+        <translation>Clear + Compute</translation>
+    </message>
+    <message>
+        <source>MEN_SHOW_ERRORS</source>
+        <translation>Show Compute Errors</translation>
+    </message>
+    <message>
+        <source>MEN_COMPUTE_SUBMESH</source>
+        <translation>Compute Sub-mesh</translation>
+    </message>
      <message>
          <source>MEN_PRECOMPUTE</source>
          <translation>Preview</translation>
@@ -272,6 +348,130 @@
          <source>MEN_CONSTRUCT_GROUP</source>
          <translation>Construct Group</translation>
      </message>
+    <message>
+        <source>MEN_MG_ADAPT</source>
+        <translation>Remesh with MG_Adapt</translation>
+    </message>
+    <message>
+        <source>MEN_HOMARD_ADAPT</source>
+        <translation>Uniform refinement</translation>
+    </message>
+    <message>
+        <source>Args</source>
+        <translation>Arguments</translation>
+    </message>
+    <message>
+        <source>MeshOut</source>
+        <translation>Mesh Out</translation>
+    </message>
+    <message>
+        <source>MeshIn</source>
+        <translation>Mesh In</translation>
+    </message>
+    <message>
+        <source>MEDFile</source>
+        <translation>MED file</translation>
+    </message>
+    <message>
+        <source>Browser</source>
+        <translation>Browser</translation>
+    </message>
+    <message>
+        <source>Publish_MG_ADAPT</source>
+        <translation>Publish</translation>
+    </message>
+    <message>
+        <source>SIZE_MAP_FIELD</source>
+        <translation>Size map field</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_FIELD_NAME</source>
+        <translation>Field Name</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_MED_FILE_1</source>
+        <translation>This MED file cannot be read.</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_MED_FILE_2</source>
+        <translation>No mesh in this MED file.</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_MED_FILE_3</source>
+        <translation>More than one mesh in this MED file.</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_MED_FILE_4</source>
+        <translation>The mesh in this MED file cannot be read.</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_MED_FILE_5</source>
+        <translation>No field in this MED file.</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_ERROR</source>
+        <translation>Error</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_CH_ST</source>
+        <translation>Chosen time step</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_RANK</source>
+        <translation>Rank</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_TSTP</source>
+        <translation>Time step </translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_NO_T_ST</source>
+        <translation>No time step</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_L_ST</source>
+        <translation>Last time step</translation>
+    </message>
+    <message>
+        <source>MeshName</source>
+        <translation>Mesh name</translation>
+    </message>
+    <message>
+        <source>LOCAL_MG_ADAPT</source>
+        <translation>Local</translation>
+    </message>
+    <message>
+        <source>BACKGRND_MG_ADAPT</source>
+        <translation>Background</translation>
+    </message>
+    <message>
+        <source>CNST_MG_ADAPT</source>
+        <translation>Constant</translation>
+    </message>
+    <message>
+        <source>MED_FILE_BCKG</source>
+        <translation>MED file background size map</translation>
+    </message>
+    <message>
+        <source>VALUE_MG_ADAPT</source>
+        <translation>Value</translation>
+    </message>
+    <message>
+        <source>SIZE_MAP_DEF</source>
+        <translation>Size map definition</translation>
+    </message>
+    <message>
+        <source>ADVOP</source>
+        <translation>Advanced Options</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_DIAG_1</source>
+        <translation>Adaptation succeeded.</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_DIAG_2</source>
+        <translation>Adaptation failed.</translation>
+    </message>
      <message>
          <source>MEN_CONV_TO_QUAD</source>
          <translation>Convert to/from quadratic</translation>
@@ -280,9 +480,13 @@
          <source>MEN_2D_FROM_3D</source>
          <translation>Create boundary elements</translation>
      </message>
+    <message>
+        <source>MEN_2D_FROM_3D_ELEMENTS</source>
+        <translation>Create 2D mesh from 3D elements</translation>
+    </message>
      <message>
          <source>MEN_MESH_ORDER</source>
-        <translation>Change submesh priority</translation>
+        <translation>Change sub-mesh priority</translation>
      </message>
      <message>
          <source>MEN_CREATE_GROUP</source>
@@ -344,6 +548,22 @@
          <source>MEN_DEL_GROUP</source>
          <translation>Delete Groups with Contents</translation>
      </message>
+    <message>
+        <source>MEN_ADD_TO_GROUP</source>
+        <translation>Add to Group</translation>
+    </message>
+    <message>
+        <source>MEN_REMOVE_FROM_GROUP</source>
+        <translation>Remove from Group</translation>
+    </message>
+    <message>
+        <source>STB_ADD_TO_GROUP</source>
+        <translation>Add selected elements to group</translation>
+    </message>
+    <message>
+        <source>STB_REMOVE_FROM_GROUP</source>
+        <translation>Remove selected elements from group</translation>
+    </message>
      <message>
          <source>MEN_FACE_ORIENTATION</source>
          <translation>Orientation of Faces</translation>
@@ -392,6 +612,10 @@
          <source>MEN_EDGES</source>
          <translation>Edges</translation>
      </message>
+    <message>
+        <source>MEN_CHOOSE</source>
+        <translation>Choose...</translation>
+    </message>
      <message>
          <source>MEN_EDIT</source>
          <translation>Edit</translation>
@@ -412,6 +636,14 @@
          <source>MEN_EDIT_MESHSUBMESH</source>
          <translation>Edit Mesh/Sub-mesh</translation>
      </message>
+    <message>
+        <source>MEN_EDIT_MESH</source>
+        <translation>Edit Mesh</translation>
+    </message>
+    <message>
+        <source>MEN_EDIT_SUBMESH</source>
+        <translation>Edit Sub-mesh</translation>
+    </message>
      <message>
          <source>MEN_EXPORT</source>
          <translation>Export</translation>
@@ -432,10 +664,6 @@
          <source>MEN_EXPORT_GMF</source>
          <translation>Export to GMF file</translation>
      </message>
-    <message>
-        <source>MEN_EXPORT_SAUV</source>
-        <translation>Export to SAUV file</translation>
-    </message>
      <message>
          <source>MEN_EXPORT_STL</source>
          <translation>Export to STL file</translation>
@@ -466,15 +694,15 @@
      </message>
      <message>
          <source>TOP_REORIENT_2D</source>
-        <translation>Reorient faces by vector</translation>
+        <translation>Reorient faces</translation>
      </message>
      <message>
          <source>MEN_REORIENT_2D</source>
-        <translation>Reorient faces by vector</translation>
+        <translation>Reorient faces</translation>
      </message>
      <message>
          <source>STB_REORIENT_2D</source>
-        <translation>Reorient faces by vector</translation>
+        <translation>Reorient faces</translation>
      </message>
      <message>
          <source>TOP_FIND_ELEM</source>
@@ -576,6 +804,10 @@
          <source>MEN_FREE_NODE</source>
          <translation>Free Nodes</translation>
      </message>
+    <message>
+        <source>MEN_NODE_CONNECTIVITY_NB</source>
+        <translation>Node connectivity number</translation>
+    </message>
      <message>
          <source>MEN_FREE_FACES</source>
          <translation>Free Faces</translation>
@@ -616,6 +848,10 @@
          <source>MEN_LENGTH_2D</source>
          <translation>Length 2D</translation>
      </message>
+    <message>
+        <source>MEN_DEFLECTION_2D</source>
+        <translation>Deflection 2D</translation>
+    </message>
      <message>
          <source>MEN_MAP</source>
          <translation>Pattern Mapping</translation>
@@ -653,12 +889,12 @@
          <translation>GMF file</translation>
      </message>
      <message>
-        <source>MEN_IMPORT_SAUV</source>
-        <translation>SAUV file</translation>
+        <source>MEN_IMPORT_MESHIO</source>
+        <translation>other formats... (meshio)</translation>
      </message>
      <message>
-        <source>MEN_SAUV</source>
-        <translation>SAUV file</translation>
+        <source>MEN_EXPORT_MESHIO</source>
+        <translation>other formats... (meshio)</translation>
      </message>
      <message>
          <source>MEN_MERGE</source>
@@ -676,6 +912,18 @@
          <source>MEN_MESH_THROU_POINT</source>
          <translation>Move Node</translation>
      </message>
+    <message>
+        <source>MEN_MOVE_NODE_INTRCT</source>
+        <translation>Move node by mouse</translation>
+    </message>
+    <message>
+        <source>MEN_SPLIT_DIAG_INTRC</source>
+        <translation>Add node on segment</translation>
+    </message>
+    <message>
+        <source>MEN_SPLIT_FACE_INTRC</source>
+        <translation>Add node to triangle</translation>
+    </message>
      <message>
          <source>MEN_MIN_ANG</source>
          <translation>Minimum Angle</translation>
@@ -684,6 +932,10 @@
          <source>MEN_MODIFY</source>
          <translation>Modification</translation>
      </message>
+    <message>
+        <source>MEN_ADAPT</source>
+        <translation>Adaptation</translation>
+    </message>
      <message>
          <source>MEN_MEASURE</source>
          <translation>Measurements</translation>
@@ -740,7 +992,7 @@
          <source>TOP_MEASURE_AREA</source>
          <translation>Area</translation>
      </message>
-     <message>
+    <message>
          <source>MEN_MEASURE_VOLUME</source>
          <translation>Volume</translation>
      </message>
@@ -752,6 +1004,18 @@
          <source>TOP_MEASURE_VOLUME</source>
          <translation>Volume</translation>
      </message>
+    <message>
+        <source>MEN_MEASURE_ANGLE</source>
+        <translation>Angle</translation>
+    </message>
+    <message>
+        <source>STB_MEASURE_ANGLE</source>
+        <translation>Measure angle defined by three nodes</translation>
+    </message>
+    <message>
+        <source>TOP_MEASURE_ANGLE</source>
+        <translation>Angle</translation>
+    </message>
      <message>
          <source>MEN_MOVE</source>
          <translation>Move Node</translation>
@@ -784,6 +1048,10 @@
          <source>MEN_POLYGON</source>
          <translation>Polygon</translation>
      </message>
+    <message>
+        <source>MEN_QUADRATIC_POLYGON</source>
+        <translation>Quadratic Polygon</translation>
+    </message>
      <message>
          <source>MEN_POLYHEDRON</source>
          <translation>Polyhedron</translation>
@@ -812,6 +1080,10 @@
          <source>MEN_QUADRATIC_PENTAHEDRON</source>
          <translation>Quadratic Pentahedron</translation>
      </message>
+    <message>
+        <source>MEN_BIQUADRATIC_PENTAHEDRON</source>
+        <translation>BiQuadratic Pentahedron</translation>
+    </message>
      <message>
          <source>MEN_QUADRATIC_PYRAMID</source>
          <translation>Quadratic Pyramid</translation>
@@ -844,6 +1116,10 @@
          <source>MEN_REMOVE_NODES</source>
          <translation>Nodes</translation>
      </message>
+    <message>
+        <source>MEN_REMOVE_NODE_RECON</source>
+        <translation>Node with reconnection</translation>
+    </message>
      <message>
          <source>MEN_REMOVE_ORPHAN_NODES</source>
          <translation>Orphan Nodes</translation>
@@ -878,7 +1154,7 @@
      </message>
      <message>
          <source>MEN_SAVE_DISTRIBUTION</source>
-        <translation>Export ...</translation>
+        <translation>Export the distribution...</translation>
      </message>
      <message>
          <source>MEN_SHOW_DISTRIBUTION</source>
@@ -924,6 +1200,10 @@
          <source>MEN_SHADE</source>
          <translation>Shading</translation>
      </message>
+    <message>
+        <source>MEN_SHOW_SCALAR_BAR</source>
+        <translation>Show Scalar Bar</translation>
+    </message>
      <message>
          <source>MEN_QUADRATIC_REPRESENT</source>
          <translation>2D Quadratic</translation>
@@ -988,6 +1268,10 @@
          <source>MEN_SCALE</source>
          <translation>Scale Transform</translation>
      </message>
+    <message>
+        <source>MEN_OFFSET</source>
+        <translation>Offset</translation>
+    </message>
      <message>
          <source>MEN_DUPLICATE_NODES</source>
          <translation>Duplicate Nodes or/and Elements</translation>
@@ -1030,7 +1314,11 @@
      </message>
      <message>
          <source>MEN_UNDERLYING_ELEMS</source>
-        <translation>Group of underlying entities</translation>
+        <translation>Group based on nodes of other groups</translation>
+    </message>
+    <message>
+        <source>MEN_FACE_GROUPS_BY_EDGES</source>
+        <translation>Face groups separated by sharp edges</translation>
      </message>
      <message>
          <source>MEN_UPDATE</source>
@@ -1048,10 +1336,18 @@
          <source>MEN_VOLUME_3D</source>
          <translation>Volume</translation>
      </message>
+    <message>
+        <source>MEN_SCALED_JACOBIAN</source>
+        <translation>Scaled Jacobian</translation>
+    </message>
      <message>
          <source>MEN_WARP</source>
          <translation>Warping Angle</translation>
      </message>
+    <message>
+        <source>MEN_WARP_3D</source>
+        <translation>Warping 3D</translation>
+    </message>
      <message>
          <source>MEN_WHAT_IS</source>
          <translation>Mesh Element Information</translation>
@@ -1062,15 +1358,31 @@
      </message>
      <message>
          <source>MEN_SPLIT_TO_TETRA</source>
-        <translation>Split into Tetrahedra</translation>
+        <translation>Split Volumes</translation>
      </message>
      <message>
          <source>TOP_SPLIT_TO_TETRA</source>
-        <translation>Split into Tetrahedra</translation>
+        <translation>Split Volumes</translation>
+    </message>
+    <message>
+        <source>STB_OVERALL_MESH_QUALITY</source>
+        <translation>Overall Mesh Quality</translation>
      </message>
      <message>
          <source>STB_SPLIT_TO_TETRA</source>
-        <translation>Split into Tetrahedra</translation>
+        <translation>Split Volumes</translation>
+    </message>
+    <message>
+        <source>MEN_SPLIT_BIQUAD</source>
+        <translation>Split bi-quadratic into linear</translation>
+    </message>
+    <message>
+        <source>TOP_SPLIT_BIQUAD</source>
+        <translation>Split bi-quadratic into linear</translation>
+    </message>
+    <message>
+        <source>STB_SPLIT_BIQUAD</source>
+        <translation>Split bi-quadratic into linear</translation>
      </message>
      <message>
          <source>MESHERS_FILE_CANT_OPEN</source>
@@ -1115,8 +1427,13 @@ Please, select a mesh and try again</translation>
  Please enter a name of new group to be created or choose an existing one.</translation>
      </message>
      <message>
-        <source>MESH_STANDALONE_GRP_CHOSEN</source>
+        <source>MESH_GEOM_GRP_CHOSEN</source>
          <translation>Group on geometry is chosen: %1.
+Do you want to convert it to the standalone group?</translation>
+    </message>
+    <message>
+        <source>MESH_FILTER_GRP_CHOSEN</source>
+        <translation>Group on filter is chosen: %1.
  Do you want to convert it to the standalone group?</translation>
      </message>
      <message>
@@ -1160,6 +1477,10 @@ Please enter correct values and try again</translation>
          <source>SMESH_ADD_ELEM0D_TITLE</source>
          <translation>Add 0D Element</translation>
      </message>
+    <message>
+        <source>SMESH_DUPLICATE_0D</source>
+        <translation>Allow duplicate elements</translation>
+    </message>
      <message>
          <source>SMESH_ADD_BALL</source>
          <translation>Add Ball Element</translation>
@@ -1213,6 +1534,14 @@ Please enter correct values and try again</translation>
          <source>SMESH_ADD_POLYGON_TITLE</source>
          <translation>Add Polygon</translation>
      </message>
+    <message>
+        <source>SMESH_ADD_QUADRATIC_POLYGON</source>
+        <translation>Add Quadratic polygon</translation>
+    </message>
+    <message>
+        <source>SMESH_ADD_QUADRATIC_POLYGON_TITLE</source>
+        <translation>Add Quadratic Polygon</translation>
+    </message>
      <message>
          <source>SMESH_ADD_PENTA</source>
          <translation>Add pentahedron</translation>
@@ -1253,6 +1582,10 @@ Please enter correct values and try again</translation>
          <source>SMESH_ADD_QUADRATIC_PENTAHEDRON_TITLE</source>
          <translation>Add Quadratic Pentahedron</translation>
      </message>
+    <message>
+        <source>SMESH_ADD_BIQUADRATIC_PENTAHEDRON_TITLE</source>
+        <translation>Add BiQuadratic Pentahedron</translation>
+    </message>
      <message>
          <source>SMESH_ADD_QUADRATIC_PYRAMID_TITLE</source>
          <translation>Add Quadratic Pyramid</translation>
@@ -1279,7 +1612,7 @@ Please enter correct values and try again</translation>
      </message>
      <message>
          <source>SMESH_ADD_SUBMESH</source>
-        <translation>SubMesh Construction</translation>
+        <translation>Sub-mesh Construction</translation>
      </message>
      <message>
          <source>SMESH_ADD_TETRAS</source>
@@ -1317,6 +1650,14 @@ Please enter correct values and try again</translation>
          <source>SMESH_AUTO_DIM</source>
          <translation>Automatically define space dimension</translation>
      </message>
+    <message>
+        <source>SMESH_MED_SAVE_NUMS</source>
+        <translation>Export indices</translation>
+    </message>
+    <message>
+        <source>SMESH_ZTOLERANCE</source>
+        <translation>Z tolerance</translation>
+    </message>
      <message>
          <source>SMESH_REQUIRED_GROUPS</source>
          <translation>Create groups of required entities</translation>
@@ -1325,6 +1666,10 @@ Please enter correct values and try again</translation>
          <source>SMESH_AVAILABLE</source>
          <translation>Available</translation>
      </message>
+    <message>
+        <source>SMESH_NOT_AVAILABLE</source>
+        <translation>Not available</translation>
+    </message>
      <message>
          <source>SMESH_AVAILABLE_ALGORITHMS</source>
          <translation>Available algorithms</translation>
@@ -1631,7 +1976,12 @@ so that the application may crash. Do you wish to continue visualization?</trans
      <message>
          <source>SMESH_EXPORT_FAILED</source>
          <translation>Mesh export failed.
-Probably, there is not enough space on disk.</translation>
+Probably, there is not enough space on disk, or the version of MED file used is not compatible with the mesh.
+</translation>
+    </message>
+    <message>
+        <source>SMESH_EXPORT_FAILED_SHORT</source>
+        <translation>Mesh export failed.</translation>
      </message>
      <message>
          <source>SMESH_EXPORT_MED_DUPLICATED_GRP</source>
@@ -1639,20 +1989,18 @@ Probably, there is not enough space on disk.</translation>
  You can cancel exporting and rename them,
  otherwise some group names in the resulting file
  will not match ones in the study.
-Do you want to continue ?</translation>
+Do you want to continue?</translation>
      </message>
      <message>
          <source>SMESH_EXPORT_MED_DUPLICATED_MESH_NAMES</source>
          <translation>There are some mesh objects with the same names in the selection.
  The result file may be incorrect.
-Do you want to continue ?</translation>
+Do you want to continue?</translation>
      </message>
      <message>
-        <source>SMESH_EXPORT_MED_V2_1</source>
-        <translation>During export mesh with name - &quot;%1&quot; to MED 2.1
-polygons and polyhedrons elements will be missed
-For correct export use MED 2.2
-Are you sure want to export to MED 2.1 ?</translation>
+        <source>SMESH_EXPORT_ONLY_GPOUP</source>
+        <translation>You are going to export the group without its mesh.
+Do you want to continue?</translation>
      </message>
      <message>
          <source>SMESH_EXPORT_MED_VERSION_COLLISION</source>
@@ -1666,12 +2014,28 @@ Overwrite the file?</translation>
  meshes with the following names: %1
  The result file may be incorrect.
  Overwrite the file?</translation>
+    </message>
+    <message>
+        <source>SMESH_EXPORT_MESHIO_ONLY_MESH</source>
+        <translation>Current implementation uses export through intermediate MED file.
+However, meshio does not support reading MED files with more than one mesh.
+Selected meshes will be saved into separated files.
+
+Do you want to continue?</translation>
+    </message>
+    <message>
+        <source>SMESH_MESHIO_NOT_INSTALLED</source>
+        <translation>Meshio is not installed!
+Operation will be canceled.
+
+Try to install meshio with a command:
+pip install meshio[all]</translation>
      </message>
      <message>
          <source>EXPORT_NOT_SUPPORTED</source>
          <translation>During export mesh with name &quot;%1&quot; to %2
  %3 will be missed.
-Do you want to continue ?</translation>
+Do you want to continue?</translation>
      </message>
      <message>
          <source>SMESH_EXTRUSION</source>
@@ -1679,11 +2043,15 @@ Do you want to continue ?</translation>
      </message>
      <message>
          <source>SMESH_EXTRUSION_TO_DISTANCE</source>
-        <translation>Extrusion To Distance</translation>
+        <translation>Extrusion to distance</translation>
      </message>
      <message>
          <source>SMESH_EXTRUSION_ALONG_VECTOR</source>
-        <translation>Extrusion Along Vector</translation>
+        <translation>Extrusion along vector</translation>
+    </message>
+    <message>
+        <source>SMESH_EXTRUSION_BY_NORMAL</source>
+        <translation>Extrusion by normal</translation>
      </message>
      <message>
          <source>SMESH_FACE</source>
@@ -1768,7 +2136,7 @@ add the exported data to its contents?</translation>
          <translation>Height:</translation>
      </message>
      <message>
-        <source>SMESH_HEXAS</source>
+        <source>SMESH_HEXAHEDRON</source>
          <translation>Hexahedron</translation>
      </message>
      <message>
@@ -1776,7 +2144,7 @@ add the exported data to its contents?</translation>
          <translation>Hexahedrons</translation>
      </message>
      <message>
-        <source>SMESH_HILIGHT_COLOR</source>
+        <source>SMESH_HIGHLIGHT_COLOR</source>
          <translation>Highlight Color</translation>
      </message>
      <message>
@@ -1787,13 +2155,21 @@ add the exported data to its contents?</translation>
          <source>SMESH_HYPOTHESES</source>
          <translation>Hypotheses</translation>
      </message>
+    <message>
+        <source>SMESH_HYPOTHESIS</source>
+        <translation>Hypothesis</translation>
+    </message>
+    <message>
+        <source>SMESH_ALGORITHM</source>
+        <translation>Algorithm</translation>
+    </message>
      <message>
          <source>SMESH_HYP_1</source>
          <translation>Algorithm misses a hypothesis</translation>
      </message>
      <message>
          <source>SMESH_HYP_10</source>
-        <translation>Hypothesis and submesh dimensions mismatch</translation>
+        <translation>Hypothesis and sub-mesh dimensions mismatch</translation>
      </message>
      <message>
          <source>SMESH_HYP_11</source>
@@ -1818,7 +2194,7 @@ Check algorithm documentation for supported geometry</translation>
      </message>
      <message>
          <source>SMESH_HYP_4</source>
-        <translation>Submesh is ignored as there is another algorithm of upper dimension generating %1D elements</translation>
+        <translation>Sub-mesh is ignored as there is another algorithm of upper dimension generating %1D elements</translation>
      </message>
      <message>
          <source>SMESH_HYP_5</source>
@@ -1838,23 +2214,27 @@ Check algorithm documentation for supported geometry</translation>
      </message>
      <message>
          <source>SMESH_HYP_9</source>
-        <translation>Such dimention hypothesis is already assigned to the shape</translation>
+        <translation>Such dimension hypothesis is already assigned to the shape</translation>
      </message>
      <message>
          <source>SMESH_ID_DIAGONAL</source>
-        <translation>Id Edges</translation>
+        <translation>Edges IDs</translation>
+    </message>
+    <message>
+        <source>SMESH_ID_EDGES</source>
+        <translation>Edge IDs</translation>
      </message>
      <message>
          <source>SMESH_ID_ELEMENTS</source>
-        <translation>Id Elements</translation>
+        <translation>Element IDs</translation>
      </message>
      <message>
          <source>SMESH_ID_FACES</source>
-        <translation>Id Faces</translation>
+        <translation>Face IDs</translation>
      </message>
      <message>
          <source>SMESH_ID_NODES</source>
-        <translation>Id Nodes</translation>
+        <translation>Node IDs</translation>
      </message>
      <message>
          <source>SMESH_INCORRECT_INPUT</source>
@@ -1892,6 +2272,14 @@ Check algorithm documentation for supported geometry</translation>
          <source>SMESH_LOGARITHMIC_SCALARBAR</source>
          <translation>Logarithmic</translation>
      </message>
+    <message>
+        <source>SMESH_TRESHOLD_SCALARBAR</source>
+        <translation>Threshold</translation>
+    </message>
+    <message>
+        <source>SMESH_WIREFRAME_OFF_SCALARBAR</source>
+        <translation>Wireframe Off</translation>
+    </message>
      <message>
          <source>SMESH_MAKE_GROUPS</source>
          <translation>Generate groups</translation>
@@ -1926,23 +2314,23 @@ Check algorithm documentation for supported geometry</translation>
      </message>
      <message>
          <source>SMESH_MEN_SubMeshesOnCompound</source>
-        <translation>SubMeshes On Compound</translation>
+        <translation>Sub-meshes On Compound</translation>
      </message>
      <message>
          <source>SMESH_MEN_SubMeshesOnEdge</source>
-        <translation>SubMeshes On Edge</translation>
+        <translation>Sub-meshes On Edge</translation>
      </message>
      <message>
          <source>SMESH_MEN_SubMeshesOnFace</source>
-        <translation>SubMeshes On Face</translation>
+        <translation>Sub-meshes On Face</translation>
      </message>
      <message>
          <source>SMESH_MEN_SubMeshesOnSolid</source>
-        <translation>SubMeshes On Solid</translation>
+        <translation>Sub-meshes On Solid</translation>
      </message>
      <message>
          <source>SMESH_MEN_SubMeshesOnVertex</source>
-        <translation>SubMeshes On Vertex</translation>
+        <translation>Sub-meshes On Vertex</translation>
      </message>
      <message>
          <source>SMESH_AUTOMATIC</source>
@@ -1994,7 +2382,7 @@ Check algorithm documentation for supported geometry</translation>
      </message>
      <message>
          <source>SMESH_MESHINFO_ALL_TYPES</source>
-        <translation>Heterogenous</translation>
+        <translation>Heterogeneous</translation>
      </message>
      <message>
          <source>SMESH_MESHINFO_EDGES</source>
@@ -2036,6 +2424,10 @@ Check algorithm documentation for supported geometry</translation>
          <source>SMESH_MESHINFO_ORDER2</source>
          <translation>Quadratic</translation>
      </message>
+    <message>
+        <source>SMESH_MESHINFO_ORDER3</source>
+        <translation>Bi-Quadratic</translation>
+    </message>
      <message>
          <source>SMESH_MESHINFO_HEXAPRISM</source>
          <translation>Hexagonal prisms</translation>
@@ -2104,6 +2496,10 @@ Check algorithm documentation for supported geometry</translation>
          <source>SMESH_NAME</source>
          <translation>Name</translation>
      </message>
+    <message>
+        <source>SMESH_NAMES</source>
+        <translation>Names</translation>
+    </message>
      <message>
          <source>SMESH_NODES</source>
          <translation>Nodes</translation>
@@ -2152,9 +2548,13 @@ Check algorithm documentation for supported geometry</translation>
          <source>SMESH_OBJECT_MESH</source>
          <translation>Mesh</translation>
      </message>
+    <message>
+        <source>SMESH_OBJECTS</source>
+        <translation>Objects</translation>
+    </message>
      <message>
          <source>SMESH_OBJECT_MESHorSUBMESH</source>
-        <translation>Mesh or SubMesh</translation>
+        <translation>Mesh or Sub-mesh</translation>
      </message>
      <message>
          <source>SMESH_OPERATION_FAILED</source>
@@ -2296,9 +2696,9 @@ Check algorithm documentation for supported geometry</translation>
          <source>PREF_NUMBERING_NODE</source>
          <translation>Nodes: Color</translation>
      </message>
-     <message>
+    <message>
          <source>PREF_NUMBERING_ELEM</source>
-        <translation>Edges: Color</translation>
+        <translation>Elements: Color</translation>
      </message>
      <message>
          <source>PREF_NUMBERING_FONT</source>
@@ -2392,10 +2792,18 @@ Check algorithm documentation for supported geometry</translation>
          <source>SMESH_QUADRATIC_PENTAHEDRON</source>
          <translation>Quadratic Pentahedron</translation>
      </message>
+    <message>
+        <source>SMESH_BIQUADRATIC_PENTAHEDRON</source>
+        <translation>BiQuadratic Pentahedron</translation>
+    </message>
      <message>
          <source>SMESH_QUADRATIC_PENTAHEDRONS</source>
          <translation>Quadratic Pentahedrons</translation>
      </message>
+    <message>
+        <source>SMESH_BIQUADRATIC_PENTAHEDRONS</source>
+        <translation>BiQuadratic Pentahedrons</translation>
+    </message>
      <message>
          <source>SMESH_QUADRATIC_PYRAMID</source>
          <translation>Quadratic Pyramid</translation>
@@ -2500,6 +2908,10 @@ Check algorithm documentation for supported geometry</translation>
          <source>SMESH_RENUMBERING</source>
          <translation>Renumbering</translation>
      </message>
+    <message>
+        <source>SMESH_RENUMBER</source>
+        <translation>Renumber</translation>
+    </message>
      <message>
          <source>SMESH_RENUMBERING_ELEMENTS_TITLE</source>
          <translation>Renumbering elements</translation>
@@ -2561,6 +2973,10 @@ Check algorithm documentation for supported geometry</translation>
          <source>SMESH_SEWING</source>
          <translation>Sewing</translation>
      </message>
+    <message>
+        <source>SMESH_SHOW_SCALAR_BAR</source>
+        <translation>Show Scalar Bar</translation>
+    </message>
      <message>
          <source>SMESH_SMOOTHING</source>
          <translation>Smoothing</translation>
@@ -2571,18 +2987,18 @@ Check algorithm documentation for supported geometry</translation>
      </message>
      <message>
          <source>SMESH_SUBMESH</source>
-        <translation>SubMesh</translation>
+        <translation>Sub-mesh</translation>
      </message>
      <message>
          <source>SMESH_SUBMESH_SELECTED</source>
-        <translation>%1 SubMeshes</translation>
+        <translation>%1 Sub-meshes</translation>
      </message>
      <message>
          <source>SMESH_SYMMETRY</source>
          <translation>Symmetry</translation>
      </message>
      <message>
-        <source>SMESH_TETRAS</source>
+        <source>SMESH_TETRAHEDRON</source>
          <translation>Tetrahedron</translation>
      </message>
      <message>
@@ -2682,26 +3098,106 @@ Check algorithm documentation for supported geometry</translation>
          <translation>Multicolor</translation>
      </message>
      <message>
-        <source>SMESH_VISU_PROBLEM</source>
-        <translation>Mesh visualization failed</translation>
+        <source>ADAPT_PREF_TAB_GENERAL</source>
+        <translation>Adaptation</translation>
      </message>
      <message>
-        <source>SMESH_VISU_PROBLEM_MEMORY</source>
-        <translation>Mesh visualization failed, probably due to lack of memory</translation>
+        <source>ADAPT_PREF_NONE</source>
+        <translation>None</translation>
      </message>
      <message>
-        <source>SMESH_VISU_PROBLEM_CLEAR</source>
-        <translation>Mesh visualization failed, no memory even to show a message,
-so all visual data have been removed to let the application live.
-Consider saving your work before application crash</translation>
+        <source>ADAPT_WITH_HOMARD</source>
+        <translation>Adaptation with HOMARD</translation>
      </message>
      <message>
-        <source>SMESH_VOLUME</source>
-        <translation>Volume</translation>
+        <source>ADAPT_PREF_MG_ADAPT</source>
+        <translation>Adaptation with MG-Adapt</translation>
      </message>
      <message>
-        <source>SMESH_VOLUMES</source>
-        <translation>Volumes</translation>
+        <source>ADAPT_PREF_MG_ADAPT_FILE_MAILLAGE_OUT</source>
+        <translation>Write the OUT mesh</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_PUBLICATION_MAILLAGE_OUT</source>
+        <translation>Publication of the OUT mesh</translation>
+    </message>
+    <message>
+        <source>OPTION_VALUE_COLUMN</source>
+        <translation>Option</translation>
+    </message>
+    <message>
+        <source>OPTION_NAME_COLUMN</source>
+        <translation>Value</translation>
+    </message>
+    <message>
+        <source>compute_ridges</source>
+        <translation>Compute ridges</translation>
+    </message>
+    <message>
+        <source>max_memory</source>
+        <translation>Maximum memory (Mb)</translation>
+    </message>
+    <message>
+        <source>Adaption</source>
+        <translation>adaptation</translation>
+    </message>
+    <message>
+        <source>components</source>
+        <translation>Components</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_SIZE_MAP</source>
+        <translation>Size map</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_SIZE_MAP_LOCAL</source>
+        <translation>Local</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_SIZE_MAP_BACKGROUND</source>
+        <translation>Background</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_TIME_STEP_LAST</source>
+        <translation>Last</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_TIME_STEP</source>
+        <translation>Choosen time step</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_TIME_STEP_C</source>
+        <translation>Value</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_SELECT_FILE_0</source>
+        <translation>MG-ADAPT select file</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_ADVOP</source>
+        <translation>Advanced Options</translation>
+    </message>
+    <message>
+        <source>SMESH_VISU_PROBLEM</source>
+        <translation>Mesh visualization failed</translation>
+    </message>
+    <message>
+        <source>SMESH_VISU_PROBLEM_MEMORY</source>
+        <translation>Mesh visualization failed, probably due to lack of memory</translation>
+    </message>
+    <message>
+        <source>SMESH_VISU_PROBLEM_CLEAR</source>
+        <translation>Mesh visualization failed, no memory even to show a message,
+so all visual data have been removed to let the application live.
+Consider saving your work before application crash</translation>
+    </message>
+    <message>
+        <source>SMESH_VOLUME</source>
+        <translation>Volume</translation>
+    </message>
+    <message>
+        <source>SMESH_VOLUMES</source>
+        <translation>Volumes</translation>
      </message>
      <message>
          <source>SMESH_WARNING</source>
@@ -2780,6 +3276,10 @@ Use Display Entity menu command to show them.
          <source>SMESH_WRN_WARNING</source>
          <translation>Warning</translation>
      </message>
+    <message>
+        <source>SMESH_WRN_SHOW_DLG_CHECKBOX</source>
+        <translation>Don't show this warning anymore.</translation>
+    </message>
      <message>
          <source>SMESH_X</source>
          <translation>X</translation>
@@ -2800,6 +3300,10 @@ Use Display Entity menu command to show them.
          <source>SMESH_Z</source>
          <translation>Z</translation>
      </message>
+    <message>
+        <source>SMESH_Z_SCALARBAR</source>
+        <translation>Z:</translation>
+    </message>
      <message>
          <source>STATE_ALGO_MISSING</source>
          <translation>%3 %2D algorithm is missing</translation>
@@ -2856,6 +3360,10 @@ Use Display Entity menu command to show them.
          <source>STB_COPY_MESH</source>
          <translation>Copy Mesh</translation>
      </message>
+    <message>
+        <source>STB_CREATE_DUAL_MESH</source>
+        <translation>Create Dual Mesh</translation>
+    </message>
      <message>
          <source>STB_CLIP</source>
          <translation>Clipping</translation>
@@ -2868,6 +3376,14 @@ Use Display Entity menu command to show them.
          <source>STB_COMPUTE</source>
          <translation>Compute</translation>
      </message>
+    <message>
+        <source>STB_RE_COMPUTE</source>
+        <translation>Clear + Compute</translation>
+    </message>
+    <message>
+        <source>STB_COMPUTE_SUBMESH</source>
+        <translation>Compute Sub-mesh</translation>
+    </message>
      <message>
          <source>STB_PRECOMPUTE</source>
          <translation>Preview</translation>
@@ -2888,6 +3404,14 @@ Use Display Entity menu command to show them.
          <source>STB_CONSTRUCT_GROUP</source>
          <translation>Construct Group</translation>
      </message>
+    <message>
+        <source>STB_MG_ADAPT</source>
+        <translation>Remesh with MG_Adapt</translation>
+    </message>
+    <message>
+        <source>STB_HOMARD_ADAPT</source>
+        <translation>Uniform refinement</translation>
+    </message>
      <message>
          <source>STB_CONV_TO_QUAD</source>
          <translation>Convert to/from quadratic</translation>
@@ -2896,9 +3420,13 @@ Use Display Entity menu command to show them.
          <source>STB_2D_FROM_3D</source>
          <translation>Create boundary elements</translation>
      </message>
+    <message>
+        <source>STB_2D_FROM_3D_ELEMENTS</source>
+        <translation>Create 2D mesh from 3D elements</translation>
+    </message>
      <message>
          <source>STB_MESH_ORDER</source>
-        <translation>Change submesh priority</translation>
+        <translation>Change sub-mesh priority</translation>
      </message>
      <message>
          <source>STB_CREATE_GROUP</source>
@@ -3000,6 +3528,14 @@ Use Display Entity menu command to show them.
          <source>STB_EDIT_MESHSUBMESH</source>
          <translation>Edit Mesh/Sub-mesh</translation>
      </message>
+    <message>
+        <source>STB_EDIT_MESH</source>
+        <translation>Edit Mesh</translation>
+    </message>
+    <message>
+        <source>STB_EDIT_SUBMESH</source>
+        <translation>Edit Sub-mesh</translation>
+    </message>
      <message>
          <source>STB_EXPORT_DAT</source>
          <translation>Export to DAT file</translation>
@@ -3016,10 +3552,6 @@ Use Display Entity menu command to show them.
          <source>STB_EXPORT_GMF</source>
          <translation>Export to GMF file</translation>
      </message>
-    <message>
-        <source>STB_EXPORT_SAUV</source>
-        <translation>Export to SAUV file</translation>
-    </message>
      <message>
          <source>STB_EXPORT_STL</source>
          <translation>Export to STL file</translation>
@@ -3068,6 +3600,10 @@ Use Display Entity menu command to show them.
          <source>STB_FREE_NODE</source>
          <translation>Free Nodes</translation>
      </message>
+    <message>
+        <source>STB_NODE_CONNECTIVITY_NB</source>
+        <translation>Node connectivity number</translation>
+    </message>
      <message>
          <source>STB_FREE_FACES</source>
          <translation>Free Faces</translation>
@@ -3100,6 +3636,10 @@ Use Display Entity menu command to show them.
          <source>STB_LENGTH_2D</source>
          <translation>Length 2D</translation>
      </message>
+    <message>
+        <source>STB_DEFLECTION_2D</source>
+        <translation>Deflection 2D</translation>
+    </message>
      <message>
          <source>STB_MAP</source>
          <translation>Pattern mapping</translation>
@@ -3144,14 +3684,6 @@ Use Display Entity menu command to show them.
          <source>STB_GMF</source>
          <translation>Export GMF file</translation>
      </message>
-    <message>
-        <source>STB_IMPORT_SAUV</source>
-        <translation>Import SAUV file</translation>
-    </message>
-    <message>
-        <source>STB_SAUV</source>
-        <translation>Export SAUV file</translation>
-    </message>
      <message>
          <source>STB_MERGE</source>
          <translation>Merge nodes</translation>
@@ -3164,6 +3696,18 @@ Use Display Entity menu command to show them.
          <source>STB_MESH_THROU_POINT</source>
          <translation>Move Node</translation>
      </message>
+    <message>
+        <source>STB_MOVE_NODE_INTRCT</source>
+        <translation>Move Node by mouse</translation>
+    </message>
+    <message>
+        <source>STB_SPLIT_DIAG_INTRC</source>
+        <translation>Add node on segment</translation>
+    </message>
+    <message>
+        <source>STB_SPLIT_FACE_INTRC</source>
+        <translation>Add node to triangle</translation>
+    </message>
      <message>
          <source>STB_MIN_ANG</source>
          <translation>Minimum Angle</translation>
@@ -3196,6 +3740,10 @@ Use Display Entity menu command to show them.
          <source>STB_POLYGON</source>
          <translation>Polygon</translation>
      </message>
+    <message>
+        <source>STB_QUADRATIC_POLYGON</source>
+        <translation>Quadratic Polygon</translation>
+    </message>
      <message>
          <source>STB_POLYHEDRON</source>
          <translation>Polyhedron</translation>
@@ -3220,6 +3768,10 @@ Use Display Entity menu command to show them.
          <source>STB_QUADRATIC_PENTAHEDRON</source>
          <translation>Quadratic Pentahedron</translation>
      </message>
+    <message>
+        <source>STB_BIQUADRATIC_PENTAHEDRON</source>
+        <translation>BiQuadratic Pentahedron</translation>
+    </message>
      <message>
          <source>STB_QUADRATIC_PYRAMID</source>
          <translation>Quadratic Pyramid</translation>
@@ -3244,6 +3796,10 @@ Use Display Entity menu command to show them.
          <source>STB_REMOVE_NODES</source>
          <translation>Remove nodes</translation>
      </message>
+    <message>
+        <source>STB_REMOVE_NODE_RECON</source>
+        <translation>Remove node with reconnection</translation>
+    </message>
      <message>
          <source>STB_REMOVE_ORPHAN_NODES</source>
          <translation>Remove orphan nodes</translation>
@@ -3272,6 +3828,10 @@ Use Display Entity menu command to show them.
          <source>STB_SHOW_DISTRIBUTION</source>
          <translation>Show Distribution</translation>
      </message>
+    <message>
+        <source>STB_SHOW_SCALAR_BAR</source>
+        <translation>Show Scalar bar</translation>
+    </message>
      <message>
          <source>STB_REVOLUTION</source>
          <translation>Revolution</translation>
@@ -3344,6 +3904,10 @@ Use Display Entity menu command to show them.
          <source>STB_SCALE</source>
          <translation>Scale Transform</translation>
      </message>
+    <message>
+        <source>STB_OFFSET</source>
+        <translation>Offset</translation>
+    </message>
      <message>
          <source>STB_DUPLICATE_NODES</source>
          <translation>Duplicate Nodes or/and Elements</translation>
@@ -3382,7 +3946,11 @@ Use Display Entity menu command to show them.
      </message>
      <message>
          <source>STB_UNDERLYING_ELEMS</source>
-        <translation>Create groups of entities from existing groups of superior dimensions</translation>
+        <translation>Create groups of entities basing on nodes of other groups</translation>
+    </message>
+    <message>
+        <source>STB_FACE_GROUPS_BY_EDGES</source>
+        <translation>Create face groups separated by sharp edges</translation>
      </message>
      <message>
          <source>STB_UPDATE</source>
@@ -3396,10 +3964,18 @@ Use Display Entity menu command to show them.
          <source>STB_VOLUME_3D</source>
          <translation>Volume</translation>
      </message>
+    <message>
+        <source>STB_SCALED_JACOBIAN</source>
+        <translation>Scaled Jacobian</translation>
+    </message>
      <message>
          <source>STB_WARP</source>
          <translation>Warping angle</translation>
      </message>
+    <message>
+        <source>STB_WARP_3D</source>
+        <translation>Warping angle</translation>
+    </message>
      <message>
          <source>STB_WHAT_IS</source>
          <translation>Show information about the mesh node or element</translation>
@@ -3413,12 +3989,52 @@ Use Display Entity menu command to show them.
          <translation>Taper</translation>
      </message>
      <message>
-        <source>TB_ADD_REMOVE</source>
-        <translation>Add/Remove Toolbar</translation>
+        <source>TB_ADD</source>
+        <translation>Add Element Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_ADDNON</source>
+        <translation>Add Non Linear Element Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_REM</source>
+        <translation>Remove Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_RENUMBER</source>
+        <translation>Renumbering Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_INTERACT</source>
+        <translation>Interactive modifications Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_TRANSFORM</source>
+        <translation>Transformation Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_CTRL0D</source>
+        <translation>Node Controls Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_CTRL1D</source>
+        <translation>Edge Controls Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_CTRL2D</source>
+        <translation>Face Controls Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_CTRL3D</source>
+        <translation>Volume Controls Toolbar</translation>
      </message>
      <message>
-        <source>TB_CTRL</source>
-        <translation>Controls Toolbar</translation>
+        <source>TB_ADAPTATION</source>
+        <translation>Adaptation Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_MEASUREM</source>
+        <translation>Measurements Toolbar</translation>
      </message>
      <message>
          <source>TB_DISP_MODE</source>
@@ -3432,6 +4048,18 @@ Use Display Entity menu command to show them.
          <source>TB_MESH</source>
          <translation>Mesh Toolbar</translation>
      </message>
+    <message>
+        <source>TB_GROUP</source>
+        <translation>Group Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_INFO</source>
+        <translation>Information Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_ADD1D</source>
+        <translation>Mesh Toolbar</translation>
+    </message>
      <message>
          <source>TB_MODIFY</source>
          <translation>Modification Toolbar</translation>
@@ -3484,6 +4112,14 @@ Use Display Entity menu command to show them.
          <source>TOP_COMPUTE</source>
          <translation>Compute</translation>
      </message>
+    <message>
+        <source>TOP_RE_COMPUTE</source>
+        <translation>Clear + Compute</translation>
+    </message>
+    <message>
+        <source>TOP_COMPUTE_SUBMESH</source>
+        <translation>Compute Sub-mesh</translation>
+    </message>
      <message>
          <source>TOP_PRECOMPUTE</source>
          <translation>Preview</translation>
@@ -3504,6 +4140,14 @@ Use Display Entity menu command to show them.
          <source>TOP_CONSTRUCT_GROUP</source>
          <translation>Construct Group</translation>
      </message>
+    <message>
+        <source>TOP_MG_ADAPT</source>
+        <translation>Remesh with MG_Adapt</translation>
+    </message>
+    <message>
+        <source>TOP_HOMARD_ADAPT</source>
+        <translation>Uniform refinement</translation>
+    </message>
      <message>
          <source>TOP_CONV_TO_QUAD</source>
          <translation>Convert to/from quadratic</translation>
@@ -3512,9 +4156,13 @@ Use Display Entity menu command to show them.
          <source>TOP_2D_FROM_3D</source>
          <translation>Create boundary elements</translation>
      </message>
+    <message>
+        <source>TOP_2D_FROM_3D_ELEMENTS</source>
+        <translation>Create 2D mesh from 3D elements</translation>
+    </message>
      <message>
          <source>TOP_MESH_ORDER</source>
-        <translation>Change submesh priority</translation>
+        <translation>Change sub-mesh priority</translation>
      </message>
      <message>
          <source>TOP_CREATE_GROUP</source>
@@ -3616,6 +4264,14 @@ Use Display Entity menu command to show them.
          <source>TOP_EDIT_MESHSUBMESH</source>
          <translation>Edit Mesh/Sub-mesh</translation>
      </message>
+    <message>
+        <source>TOP_EDIT_MESH</source>
+        <translation>Edit Mesh</translation>
+    </message>
+    <message>
+        <source>TOP_EDIT_SUBMESH</source>
+        <translation>Edit Sub-mesh</translation>
+    </message>
      <message>
          <source>TOP_EXPORT_DAT</source>
          <translation>Export to DAT file</translation>
@@ -3624,10 +4280,6 @@ Use Display Entity menu command to show them.
          <source>TOP_EXPORT_MED</source>
          <translation>Export to MED file</translation>
      </message>
-    <message>
-        <source>TOP_EXPORT_SAUV</source>
-        <translation>Export to SAUV file</translation>
-    </message>
      <message>
          <source>TOP_EXPORT_STL</source>
          <translation>Export to STL file</translation>
@@ -3676,6 +4328,10 @@ Use Display Entity menu command to show them.
          <source>TOP_FREE_NODE</source>
          <translation>Free Nodes</translation>
      </message>
+    <message>
+        <source>TOP_NODE_CONNECTIVITY_NB</source>
+        <translation>Node connectivity number</translation>
+    </message>
      <message>
          <source>TOP_FREE_FACES</source>
          <translation>Free Faces</translation>
@@ -3708,6 +4364,10 @@ Use Display Entity menu command to show them.
          <source>TOP_LENGTH_2D</source>
          <translation>Length 2D</translation>
      </message>
+    <message>
+        <source>TOP_DEFLECTION_2D</source>
+        <translation>Deflection 2D</translation>
+    </message>
      <message>
          <source>TOP_MAP</source>
          <translation>Pattern mapping</translation>
@@ -3752,14 +4412,6 @@ Use Display Entity menu command to show them.
          <source>TOP_GMF</source>
          <translation>Export GMF file</translation>
      </message>
-    <message>
-        <source>TOP_IMPORT_SAUV</source>
-        <translation>Import SAUV file</translation>
-    </message>
-    <message>
-        <source>TOP_SAUV</source>
-        <translation>Export SAUV file</translation>
-    </message>
      <message>
          <source>TOP_MERGE</source>
          <translation>Merge nodes</translation>
@@ -3772,6 +4424,18 @@ Use Display Entity menu command to show them.
          <source>TOP_MESH_THROU_POINT</source>
          <translation>Move Node</translation>
      </message>
+    <message>
+        <source>TOP_MOVE_NODE_INTRCT</source>
+        <translation>Move node by mouse</translation>
+    </message>
+    <message>
+        <source>TOP_SPLIT_DIAG_INTRC</source>
+        <translation>Add node on segment</translation>
+    </message>
+    <message>
+        <source>TOP_SPLIT_FACE_INTRC</source>
+        <translation>Add node to triangle</translation>
+    </message>
      <message>
          <source>TOP_MIN_ANG</source>
          <translation>Minimum Angle</translation>
@@ -3804,6 +4468,10 @@ Use Display Entity menu command to show them.
          <source>TOP_POLYGON</source>
          <translation>Polygon</translation>
      </message>
+    <message>
+        <source>TOP_QUADRATIC_POLYGON</source>
+        <translation>Quadratic Polygon</translation>
+    </message>
      <message>
          <source>TOP_POLYHEDRON</source>
          <translation>Polyhedron</translation>
@@ -3828,6 +4496,10 @@ Use Display Entity menu command to show them.
          <source>TOP_QUADRATIC_PENTAHEDRON</source>
          <translation>Quadratic Pentahedron</translation>
      </message>
+    <message>
+        <source>TOP_BIQUADRATIC_PENTAHEDRON</source>
+        <translation>BiQuadratic Pentahedron</translation>
+    </message>
      <message>
          <source>TOP_QUADRATIC_PYRAMID</source>
          <translation>Quadratic Pyramid</translation>
@@ -3852,6 +4524,10 @@ Use Display Entity menu command to show them.
          <source>TOP_REMOVE_NODES</source>
          <translation>Remove nodes</translation>
      </message>
+    <message>
+        <source>TOP_REMOVE_NODE_RECON</source>
+        <translation>Remove node with reconnection</translation>
+    </message>
      <message>
          <source>TOP_REMOVE_ORPHAN_NODES</source>
          <translation>Remove orphan nodes</translation>
@@ -3952,6 +4628,10 @@ Use Display Entity menu command to show them.
          <source>TOP_SCALE</source>
          <translation>Scale Transform</translation>
      </message>
+    <message>
+        <source>TOP_OFFSET</source>
+        <translation>Offset</translation>
+    </message>
      <message>
          <source>TOP_DUPLICATE_NODES</source>
          <translation>Duplicate Nodes or/and Elements</translation>
@@ -3990,7 +4670,11 @@ Use Display Entity menu command to show them.
      </message>
      <message>
          <source>TOP_UNDERLYING_ELEMS</source>
-        <translation>Create groups of entities from existing groups of superior dimensions</translation>
+        <translation>Create groups of entities basing on nodes of other groups</translation>
+    </message>
+    <message>
+        <source>TOP_FACE_GROUPS_BY_EDGES</source>
+        <translation>Create groups of faces separated by sharp edges</translation>
      </message>
      <message>
          <source>TOP_UPDATE</source>
@@ -4004,10 +4688,18 @@ Use Display Entity menu command to show them.
          <source>TOP_VOLUME_3D</source>
          <translation>Volume</translation>
      </message>
+    <message>
+        <source>TOP_SCALED_JACOBIAN</source>
+        <translation>Scaled Jacobian</translation>
+    </message>
      <message>
          <source>TOP_WARP</source>
          <translation>Warping angle</translation>
      </message>
+    <message>
+        <source>TOP_WARP_3D</source>
+        <translation>Warping 3D</translation>
+    </message>
      <message>
          <source>TOP_WHAT_IS</source>
          <translation>Mesh Element Information</translation>
@@ -4032,9 +4724,13 @@ Use Display Entity menu command to show them.
          <source>WARP_ELEMENTS</source>
          <translation>Warping</translation>
      </message>
+    <message>
+        <source>WARP_3D_ELEMENTS</source>
+        <translation>Warping 3D</translation>
+    </message>
      <message>
          <source>MEN_FILE_INFO</source>
-        <translation>MED File Information</translation>
+        <translation>File Information</translation>
      </message>
      <message>
          <source>SMESH_WRN_NO_APPROPRIATE_SELECTION</source>
@@ -4103,8 +4799,8 @@ Use Display Entity menu command to show them.
      <message>
          <source>FULL_RECOMPUTE_QUESTION</source>
          <translation>
-The mesh has been edited since a last total re-compute 
-that may prevent successful computation. 
+The mesh has been edited since a last total re-compute
+that may prevent successful computation.
  Do you wish to re-compute the mesh totally to discard the modifications?
  </translation>
      </message>
@@ -4171,124 +4867,279 @@ It can&apos;t be deleted </translation>
          <source>STB_SORT_CHILD_ITEMS</source>
          <translation>Sort child items</translation>
      </message>
-</context>
-<context>
-    <name>SMESHGUI_Dialog</name>
      <message>
-        <source>DLG_MESH</source>
-        <translation>meshes</translation>
+        <source>MEN_BREAK_SHAPER_LINK</source>
+        <translation>Break link</translation>
      </message>
      <message>
-        <source>DLG_HYPO</source>
-        <translation>hypotheses</translation>
+        <source>STB_BREAK_SHAPER_LINK</source>
+        <translation>Break link with Shaper model</translation>
      </message>
      <message>
-        <source>DLG_ALGO</source>
-        <translation>algorithms</translation>
+      <source>MSG_BREAK_SHAPER_LINK</source>
+      <translation>A link with Shaper model for object %1 will be broken.
+Continue?</translation>
      </message>
-</context>
-<context>
-    <name>SMESHGUI</name>
      <message>
-        <source>NOT_A_VTK_VIEWER</source>
-        <translation>This command is available in VTK viewer only
-Please, create VTK viewer and try again</translation>
+        <source>MSG_WARN_ON_GEOM_MODIF</source>
+        <translation>This action is prohibited since the geometry
+was changed and the mesh needs to be recomputed.</translation>
      </message>
      <message>
-        <source>PREF_AUTO_GROUPS</source>
-        <translation>Automatically create groups for MED export</translation>
+        <source>SMESH_ADVANCED</source>
+        <translation>Advanced</translation>
      </message>
      <message>
-        <source>PREF_GROUP_SEGMENT_LENGTH</source>
-        <translation>Automatic parameters</translation>
+        <source>SMESH_1D_ALGO_GROUP_BASIC</source>
+        <translation>Basic</translation>
      </message>
      <message>
-        <source>PREF_SEGMENT_LENGTH</source>
-        <translation>Ratio Bounding Box Diagonal / Max Size</translation>
+        <source>SMESH_1D_ALGO_GROUP_ADVANCED</source>
+        <translation>Advanced</translation>
      </message>
      <message>
-        <source>PREF_NB_SEGMENTS</source>
-        <translation>Default Number of Segments</translation>
+        <source>SMESH_1D_HYP_GROUP_BASIC</source>
+        <translation>Basic</translation>
      </message>
      <message>
-        <source>SMESH_PREF_MESH_LOADING</source>
-        <translation>Mesh loading</translation>
+        <source>SMESH_1D_HYP_GROUP_PROGRESSION</source>
+        <translation>Progression</translation>
      </message>
      <message>
-        <source>PREF_FORGET_MESH_AT_HYP_MODIF</source>
-        <translation>No mesh loading from study file at hypothesis modification</translation>
+        <source>SMESH_1D_HYP_GROUP_ADVANCED</source>
+        <translation>Advanced</translation>
      </message>
      <message>
-        <source>PREF_AUTO_UPDATE</source>
-        <translation>Automatic update</translation>
+        <source>SMESH_2D_ALGO_GROUP_REGULAR</source>
+        <translation>Regular faces</translation>
      </message>
      <message>
-        <source>PREF_UPDATE_LIMIT</source>
-        <translation>Size limit (elements)</translation>
+        <source>SMESH_2D_ALGO_GROUP_FREE</source>
+        <translation>Free faces</translation>
      </message>
      <message>
-        <source>PREF_UPDATE_LIMIT_NOLIMIT</source>
-        <translation>No limit</translation>
+        <source>SMESH_2D_ALGO_GROUP_ADVANCED</source>
+        <translation>Advanced</translation>
      </message>
      <message>
-        <source>PREF_INCREMENTAL_LIMIT</source>
-        <translation>Incremental limit check</translation>
+        <source>SMESH_3D_ALGO_GROUP_REGULAR</source>
+        <translation>Regular volumes</translation>
      </message>
      <message>
-        <source>PREF_BACKFACE</source>
-        <translation>Back surface color</translation>
+        <source>SMESH_3D_ALGO_GROUP_FREE</source>
+        <translation>Free volumes</translation>
      </message>
      <message>
-        <source>PREF_VOLUME</source>
-        <translation>Volume color</translation>
+        <source>SMESH_3D_ALGO_GROUP_ADVANCED</source>
+        <translation>Advanced</translation>
      </message>
      <message>
-        <source>PREF_REVERSEDVOLUME</source>
-        <translation>Reversed volume color</translation>
+        <source>SMESH_HEX_PRISM</source>
+        <translation>Hexagonal Prism</translation>
      </message>
+</context>
+<context>
+    <name>SMESHGUI_FieldSelectorWdg</name>
      <message>
-        <source>PREF_WIREFRAME</source>
-        <translation>Wireframe color</translation>
+        <source>FIELDS_TO_EXPORT</source>
+        <translation>Export Fields</translation>
      </message>
+</context>
+<context>
+    <name>SMESHGUI_FaceGroupsSeparatedByEdgesDlg</name>
      <message>
-        <source>PREF_SELECTION</source>
-        <translation>Selection color</translation>
+        <source>CAPTION</source>
+        <translation>Face groups separated by sharp edges</translation>
      </message>
      <message>
-        <source>PREF_PRE_SELECTION</source>
-        <translation>Pre-selection color</translation>
-    </message>    
-    <message>
-        <source>PREF_COLOR</source>
-        <translation>Color</translation>
+        <source>SHARP_ANGLE</source>
+        <translation>Sharp angle</translation>
      </message>
      <message>
-        <source>PREF_ORIENTATION_COLOR</source>
-        <translation>Color</translation>
+        <source>CREATE_EDGES</source>
+        <translation>Create edges</translation>
      </message>
      <message>
-        <source>PREF_ORIENTATION_3D_VECTORS</source>
-        <translation>3D vectors</translation>
+        <source>USE_EXISTING_EDGES</source>
+        <translation>Use existing edges</translation>
      </message>
      <message>
-        <source>PREF_ORIENTATION_SCALE</source>
-        <translation>Scale</translation>
+        <source>NB_GROUPS_CREATED</source>
+        <translation>%1 group(s) of faces created</translation>
      </message>
+</context>
+<context>
+    <name>SMESHGUI_OffsetDlg</name>
      <message>
-        <source>PREF_DISPLAY_ENTITY</source>
-        <translation>Display entity</translation>
+        <source>SMESH_OFFSET_TITLE</source>
+        <translation>Offset</translation>
      </message>
      <message>
-        <source>QUADRATIC_REPRESENT_MODE</source>
-        <translation>Representation of the 2D quadratic elements</translation>
+        <source>SMESH_OFFSET</source>
+        <translation>Offset</translation>
      </message>
      <message>
-        <source>MAX_ARC_ANGLE</source>
-        <translation>Maximum angle</translation>
+        <source>OFFSET_VALUE</source>
+        <translation>Offset Value</translation>
      </message>
+</context>
+<context>
+    <name>SMESHGUI_AddMeshElementDlg</name>
      <message>
-        <source>PREF_DISPLAY_MODE</source>
-        <translation>Display mode</translation>
+        <source>NB_ADDED</source>
+        <translation>%1 elements have been added since 0D
+elements already present on the selected nodes.</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_Dialog</name>
+    <message>
+        <source>DLG_MESH</source>
+        <translation>mesh(s)</translation>
+    </message>
+    <message>
+        <source>DLG_HYPO</source>
+        <translation>hypothesis(s)</translation>
+    </message>
+    <message>
+        <source>DLG_ALGO</source>
+        <translation>algorithm(s)</translation>
+    </message>
+    <message>
+        <source>DLG_GEOM</source>
+        <translation>object(s)</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI</name>
+    <message>
+        <source>NOT_A_VTK_VIEWER</source>
+        <translation>This command is available in VTK viewer only
+Please, create VTK viewer and try again</translation>
+    </message>
+    <message>
+        <source>PREF_AUTO_GROUPS</source>
+        <translation>Automatically create groups for MED export</translation>
+    </message>
+    <message>
+        <source>PREF_SHOW_WARN</source>
+        <translation>Show warning when exporting group</translation>
+    </message>
+    <message>
+        <source>PREF_MED_SAVE_NUMS</source>
+        <translation>Save cell/node numbers to MED file</translation>
+    </message>
+    <message>
+        <source>PREF_ZTOLERANCE</source>
+        <translation>Z tolerance for MED export</translation>
+    </message>
+    <message>
+        <source>PREF_GROUP_SEGMENT_LENGTH</source>
+        <translation>Automatic parameters</translation>
+    </message>
+    <message>
+        <source>PREF_SEGMENT_LENGTH</source>
+        <translation>Ratio Bounding Box Diagonal / Max Size</translation>
+    </message>
+    <message>
+        <source>PREF_NB_SEGMENTS</source>
+        <translation>Default Number of Segments</translation>
+    </message>
+    <message>
+        <source>PREF_USE_MESHGEMS_HYPOSET</source>
+        <translation>Use MeshGems meshers when assigning set of hypotheses</translation>
+    </message>
+    <message>
+        <source>SMESH_PREF_MESH_LOADING</source>
+        <translation>Mesh loading</translation>
+    </message>
+    <message>
+        <source>PREF_FORGET_MESH_AT_HYP_MODIF</source>
+        <translation>No mesh loading from study file at hypothesis modification</translation>
+    </message>
+    <message>
+        <source>PREF_AUTO_UPDATE</source>
+        <translation>Automatic update</translation>
+    </message>
+    <message>
+        <source>PREF_UPDATE_LIMIT</source>
+        <translation>Size limit (elements)</translation>
+    </message>
+    <message>
+        <source>PREF_UPDATE_LIMIT_NOLIMIT</source>
+        <translation>No limit</translation>
+    </message>
+    <message>
+        <source>PREF_INCREMENTAL_LIMIT</source>
+        <translation>Incremental limit check</translation>
+    </message>
+    <message>
+        <source>PREF_BACKFACE</source>
+        <translation>Back surface color</translation>
+    </message>
+    <message>
+        <source>PREF_VOLUME</source>
+        <translation>Volume color</translation>
+    </message>
+    <message>
+        <source>PREF_REVERSEDVOLUME</source>
+        <translation>Reversed volume color</translation>
+    </message>
+    <message>
+        <source>PREF_WIREFRAME</source>
+        <translation>Wireframe color</translation>
+    </message>
+    <message>
+        <source>PREF_SELECTION</source>
+        <translation>Selection color</translation>
+    </message>
+    <message>
+        <source>PREF_PRE_SELECTION</source>
+        <translation>Pre-selection color</translation>
+    </message>
+    <message>
+        <source>PREF_COLOR</source>
+        <translation>Color</translation>
+    </message>
+    <message>
+        <source>PREF_ORIENTATION_COLOR</source>
+        <translation>Color</translation>
+    </message>
+    <message>
+        <source>PREF_ORIENTATION_3D_VECTORS</source>
+        <translation>3D vectors</translation>
+    </message>
+    <message>
+        <source>PREF_ORIENTATION_SCALE</source>
+        <translation>Scale</translation>
+    </message>
+    <message>
+        <source>PREF_DISPLAY_ENTITY</source>
+        <translation>Display entity</translation>
+    </message>
+    <message>
+        <source>QUADRATIC_REPRESENT_MODE_GROUP</source>
+        <translation>Representation of the 2D quadratic elements</translation>
+    </message>
+    <message>
+        <source>QUADRATIC_REPRESENT_MODE</source>
+        <translation>Default mode of the 2D quadratic elements</translation>
+    </message>
+    <message>
+        <source>MAX_ARC_ANGLE</source>
+        <translation>Maximum angle</translation>
+    </message>
+    <message>
+        <source>PREF_DISPLAY_MODE_GROUP</source>
+        <translation>Display</translation>
+    </message>
+    <message>
+        <source>PREF_DISPLAY_MODE</source>
+        <translation>Default display mode</translation>
+    </message>
+    <message>
+        <source>PREF_FITALL_ON_DISPLAYONLY</source>
+        <translation>Fit All upon Show Only</translation>
      </message>
      <message>
          <source>PREF_ELEMENTS</source>
@@ -4302,6 +5153,10 @@ Please, create VTK viewer and try again</translation>
          <source>PREF_FILL</source>
          <translation>Surface color</translation>
      </message>
+    <message>
+        <source>PREF_PREVIEW_COLOR</source>
+        <translation>Preview color</translation>
+    </message>
      <message>
          <source>PREF_NOTIFY_MODE</source>
          <translation>Show a computation result notification</translation>
@@ -4438,6 +5293,10 @@ Please, create VTK viewer and try again</translation>
          <source>PREF_OBJECTS</source>
          <translation>Objects</translation>
      </message>
+    <message>
+        <source>PREF_SELECTION_INCREMENT</source>
+        <translation>Elements width increment</translation>
+    </message>
      <message>
          <source>PREF_OBJECT_COLOR</source>
          <translation>Object color</translation>
@@ -4496,7 +5355,7 @@ Please, create VTK viewer and try again</translation>
      </message>
      <message>
          <source>PREF_COLOR_0D</source>
-        <translation>0D elements</translation>
+        <translation>0D element color</translation>
      </message>
      <message>
          <source>PREF_SIZE_0D</source>
@@ -4504,12 +5363,20 @@ Please, create VTK viewer and try again</translation>
      </message>
      <message>
          <source>PREF_BALL_COLOR</source>
-        <translation>Balls</translation>
+        <translation>Ball color</translation>
+    </message>
+    <message>
+        <source>PREF_BALL_DIAMETER</source>
+        <translation>Default diameter of ball elements</translation>
      </message>
      <message>
          <source>PREF_BALL_SIZE</source>
          <translation>Size of ball elements</translation>
      </message>
+    <message>
+        <source>PREF_BALL_SCALE</source>
+        <translation>Scale factor of ball elements</translation>
+    </message>
      <message>
          <source>PREF_WIDTH</source>
          <translation>Line width</translation>
@@ -4522,6 +5389,74 @@ Please, create VTK viewer and try again</translation>
          <source>PREF_PREVIEW_CHUNK_SIZE</source>
          <translation>Sub-shapes preview chunk size</translation>
      </message>
+    <message>
+        <source>INFO_WELCOME_TO_SMESH</source>
+        <translation>Welcome to Mesh</translation>
+    </message>
+    <message>
+        <source>INFO_GRP_CREATE_MESH</source>
+        <translation>Create mesh</translation>
+    </message>
+    <message>
+        <source>INFO_DEFINE_ALGOS</source>
+        <translation>Choose algorithms</translation>
+    </message>
+    <message>
+        <source>INFO_DEFINE_HYPOS</source>
+        <translation>Define hypotheses</translation>
+    </message>
+    <message>
+        <source>INFO_COMPUTE</source>
+        <translation>Compute</translation>
+    </message>
+    <message>
+        <source>INFO_REFINE</source>
+        <translation>Add refinements</translation>
+    </message>
+    <message>
+        <source>INFO_REFINE_LOCAL_SIZE</source>
+        <translation>via local sizes with some hypotheses</translation>
+    </message>
+    <message>
+        <source>INFO_REFINE_SUBMESH</source>
+        <translation>via sub-meshes</translation>
+    </message>
+    <message>
+        <source>INFO_GRP_IMPORT_MESH</source>
+        <translation>Import mesh</translation>
+    </message>
+    <message>
+        <source>INFO_AVAILABLE_FORMATS</source>
+        <translation>Available formats</translation>
+    </message>
+    <message>
+        <source>INFO_GRP_CHECK_MESH</source>
+        <translation> Check mesh quality</translation>
+    </message>
+    <message>
+        <source>INFO_DISPLAY</source>
+        <translation>Display mesh</translation>
+    </message>
+    <message>
+        <source>INFO_QUALITY_INFO</source>
+        <translation>Display some quality criteria</translation>
+    </message>
+    <message>
+        <source>INFO_QUALITY_AREA</source>
+        <translation>area</translation>
+    </message>
+    <message>
+        <source>INFO_QUALITY_VOLUME</source>
+        <translation>volume</translation>
+    </message>
+    <message>
+        <source>INFO_QUALITY_ASPECT_RATION</source>
+        <translation>aspect ration</translation>
+    </message>
+    <message>
+        <source>INFO_CLIPPING</source>
+        <translation>Add clipping planes</translation>
+    </message>
  </context>
  <context>
      <name>SMESHGUI_GroupDlg</name>
@@ -4529,6 +5464,10 @@ Please, create VTK viewer and try again</translation>
          <source>ALLOW_ELEM_LIST_MODIF</source>
          <translation>Enable manual edition</translation>
      </message>
+    <message>
+        <source>SELECT_ALL</source>
+        <translation>Select All</translation>
+    </message>
  </context>
  <context>
      <name>SMESHGUI_Add0DElemsOnAllNodesDlg</name>
@@ -4570,6 +5509,10 @@ Please, create VTK viewer and try again</translation>
          <source>SMESH_ADD_QUADRATIC_PENTAHEDRON</source>
          <translation>Add Quadratic Pentahedron</translation>
      </message>
+    <message>
+        <source>SMESH_ADD_BIQUADRATIC_PENTAHEDRON</source>
+        <translation>Add BiQuadratic Pentahedron</translation>
+    </message>
      <message>
          <source>SMESH_ADD_QUADRATIC_PYRAMID</source>
          <translation>Add Quadratic Pyramid</translation>
@@ -4631,7 +5574,7 @@ Please, create VTK viewer and try again</translation>
      </message>
      <message>
          <source>CREATE_COMMON_GROUPS</source>
-        <translation>Create common groups for initial meshes</translation>
+        <translation>Create groups from input objects</translation>
      </message>
      <message>
          <source>MERGE_NODES_AND_ELEMENTS</source>
@@ -4639,7 +5582,15 @@ Please, create VTK viewer and try again</translation>
      </message>
      <message>
          <source>MESHES</source>
-        <translation>Meshes</translation>
+        <translation>Meshes, sub-meshes, groups</translation>
+    </message>
+    <message>
+        <source>NEW_MESH_NAME</source>
+        <translation>Create new mesh named</translation>
+    </message>
+    <message>
+        <source>MESH_APPEND_TO</source>
+        <translation>Append to mesh</translation>
      </message>
      <message>
          <source>PROCESSING_IDENTICAL_GROUPS</source>
@@ -4651,7 +5602,7 @@ Please, create VTK viewer and try again</translation>
      </message>
      <message>
          <source>RESULT_NAME</source>
-        <translation>Result name</translation>
+        <translation>Result</translation>
      </message>
      <message>
          <source>UNITE</source>
@@ -4750,9 +5701,7 @@ Please, create VTK viewer and try again</translation>
      <name>SMESHGUI_PrecomputeOp</name>
      <message>
          <source>CLEAR_SUBMESH_QUESTION</source>
-        <translation>Temporary submeshes on the selected geometry
-were created during preview operation.
-Do you want to remove all these submeshes?</translation>
+        <translation>Do you want to remove mesh entities generated during preview operation?</translation>
      </message>
      <message>
          <source>SMESH_WRN_NOTHING_PREVIEW</source>
@@ -4760,8 +5709,35 @@ Do you want to remove all these submeshes?</translation>
      </message>
      <message>
          <source>SMESH_REJECT_MESH_ORDER</source>
-        <translation>The submesh priority changed during preview operation.
-Do you want to restore original submesh priority?</translation>
+        <translation>The sub-mesh priority changed during preview operation.
+Do you want to restore original sub-mesh priority?</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_SplitBiQuadDlg</name>
+    <message>
+        <source>CAPTION</source>
+        <translation>Split bi-quadratic into linear</translation>
+    </message>
+    <message>
+        <source>MESH</source>
+        <translation>Mesh, Group or Sub-mesh</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_SplitBiQuadOp</name>
+    <message>
+        <source>MESH_IS_NOT_SELECTED</source>
+        <translation>No object to split is selected.
+Please specify it and try again</translation>
+    </message>
+    <message>
+        <source>REF_IS_NULL</source>
+        <translation>No valid mesh object selected</translation>
+    </message>
+    <message>
+        <source>DIFFERENT_MESHES</source>
+        <translation>Selected objects belong to different meshes</translation>
      </message>
  </context>
  <context>
@@ -4786,15 +5762,38 @@ Do you want to restore original submesh priority?</translation>
          <source>RADIOBTN_2</source>
          <translation>Convert to quadratic</translation>
      </message>
-      <message>
+    <message>
          <source>RADIOBTN_3</source>
          <translation>Convert to bi-quadratic</translation>
-      </message>
-      <message>
+    </message>
+    <message>
          <source>NON_CONFORM_WARNING</source>
          <translation>Warning: mesh can become non-conformal</translation>
      </message>
  </context>
+<context>
+    <name>SMESHGUI_CreateDualMeshDlg</name>
+    <message>
+        <source>CAPTION</source>
+        <translation>Create Dual Mesh</translation>
+    </message>
+    <message>
+        <source>MESH</source>
+        <translation>Mesh or Sub-mesh</translation>
+    </message>
+    <message>
+        <source>NON_TETRA_MESH_WARNING</source>
+        <translation>Warning: mesh must have only Tetrahedron 3D elements</translation>
+    </message>
+    <message>
+        <source>DUAL_MESH_NAME</source>
+        <translation>Name of the dual mesh</translation>
+    </message>
+    <message>
+        <source>PROJ_SHAPE</source>
+        <translation>Project boundary elements on shape</translation>
+    </message>
+</context>
  <context>
      <name>SMESHGUI_ConvToQuadOp</name>
      <message>
@@ -4857,7 +5856,7 @@ Please verify validity of entered information</translation>
      </message>
      <message>
          <source>MESH_OR_SUBMESH</source>
-        <translation>Mesh or SubMesh</translation>
+        <translation>Mesh or Sub-mesh</translation>
      </message>
      <message>
          <source>PATTERN</source>
@@ -4945,8 +5944,12 @@ Please select a group and try again</translation>
          <translation>Detect</translation>
      </message>
      <message>
-        <source>EDIT_SELECTED_GROUP</source>
-        <translation>Edit selected group</translation>
+        <source>EDIT_SELECTED_NODE_GROUP</source>
+        <translation>Edit selected group of coincident nodes</translation>
+    </message>
+    <message>
+        <source>EDIT_SELECTED_ELEM_GROUP</source>
+        <translation>Edit selected group of coincident elements</translation>
      </message>
      <message>
          <source>SELECT_ALL</source>
@@ -4962,7 +5965,31 @@ Please select a group and try again</translation>
      </message>
      <message>
          <source>EXCLUDE_GROUPS</source>
-        <translation>Exclude Groups</translation>
+        <translation>Exclude groups from detection</translation>
+    </message>
+    <message>
+        <source>SEPARATE_CORNERS_AND_MEDIUM</source>
+        <translation>No merge of corner and medium nodes of quadratic cells</translation>
+    </message>
+    <message>
+        <source>AVOID_MAKING_HOLES</source>
+        <translation>Avoid making holes</translation>
+    </message>
+    <message>
+        <source>KEEP_NODES</source>
+        <translation>Nodes to keep during the merge</translation>
+    </message>
+    <message>
+        <source>KEEP_ELEMENTS</source>
+        <translation>Elements to keep during the merge</translation>
+    </message>
+    <message>
+        <source>GROUP_SUBMESH</source>
+        <translation>Groups and sub-meshes</translation>
+    </message>
+    <message>
+        <source>SELECT</source>
+        <translation>Select: </translation>
      </message>
  </context>
  <context>
@@ -4975,18 +6002,6 @@ Please select a group and try again</translation>
          <source>CANT_GET_TANGENT</source>
          <translation>Can&apos;t get tangent for one of the path nodes</translation>
      </message>
-    <message>
-        <source>EXTRUSION_0D</source>
-        <translation>Extrusion of 0D elements</translation>
-    </message>
-    <message>
-        <source>EXTRUSION_1D</source>
-        <translation>Extrusion of 1D elements</translation>
-    </message>
-    <message>
-        <source>EXTRUSION_2D</source>
-        <translation>Extrusion of 2D elements</translation>
-    </message>
      <message>
          <source>EXTRUSION_ALONG_PATH</source>
          <translation>Extrusion along a path</translation>
@@ -4997,7 +6012,7 @@ Please select a group and try again</translation>
      </message>
      <message>
          <source>LINEAR_ANGLES</source>
-        <translation>Linear variation of the angles</translation>
+        <translation>Linear variation of angles</translation>
      </message>
      <message>
          <source>NO_ELEMENTS_SELECTED</source>
@@ -5009,11 +6024,19 @@ Please select a group and try again</translation>
      </message>
      <message>
          <source>SMESH_ANGLES</source>
-        <translation>Rotation Angles</translation>
+        <translation>Rotation angles</translation>
      </message>
      <message>
          <source>SMESH_BASE_POINT</source>
-        <translation>Base Point</translation>
+        <translation>Base point</translation>
+    </message>
+    <message>
+        <source>SMESH_SCALES</source>
+        <translation>Scale factors</translation>
+    </message>
+    <message>
+        <source>LINEAR_SCALES</source>
+        <translation>Linear variation of factors</translation>
      </message>
      <message>
          <source>SMESH_PATH</source>
@@ -5021,7 +6044,7 @@ Please select a group and try again</translation>
      </message>
      <message>
          <source>SMESH_PATH_MESH</source>
-        <translation>Mesh or submesh</translation>
+        <translation>Mesh or sub-mesh</translation>
      </message>
      <message>
          <source>SMESH_PATH_SHAPE</source>
@@ -5033,11 +6056,11 @@ Please select a group and try again</translation>
      </message>
      <message>
          <source>SMESH_USE_ANGLES</source>
-        <translation>Use Angles</translation>
+        <translation>Use angles</translation>
      </message>
      <message>
          <source>SMESH_USE_BASE_POINT</source>
-        <translation>Use Base Point</translation>
+        <translation>Use base point</translation>
      </message>
      <message>
          <source>WRONG_ANGLES_NUMBER</source>
@@ -5047,20 +6070,36 @@ Please select a group and try again</translation>
  <context>
      <name>SMESHGUI_ExtrusionDlg</name>
      <message>
-        <source>EXTRUSION_0D</source>
-        <translation>Extrusion of nodes</translation>
+        <source>EXTRUSION_ALONG_LINE</source>
+        <translation>Extrusion along a line</translation>
      </message>
      <message>
-        <source>EXTRUSION_1D</source>
-        <translation>Extrusion of 1D elements</translation>
+        <source>BY_AVERAGE_NORMAL</source>
+        <translation>Along average normal</translation>
      </message>
      <message>
-        <source>EXTRUSION_2D</source>
-        <translation>Extrusion of 2D elements</translation>
+        <source>USE_INPUT_ELEMS_ONLY</source>
+        <translation>Use only input elements</translation>
      </message>
      <message>
-        <source>EXTRUSION_ALONG_LINE</source>
-        <translation>Extrusion along a line</translation>
+        <source>SMESH_SCALES</source>
+        <translation>Scale factors</translation>
+    </message>
+    <message>
+        <source>LINEAR_SCALES</source>
+        <translation>Linear variation of factors</translation>
+    </message>
+    <message>
+        <source>BASE_POINT</source>
+        <translation>Base point</translation>
+    </message>
+    <message>
+        <source>LINEAR_ANGLES</source>
+        <translation>Linear variation of angles</translation>
+    </message>
+    <message>
+        <source>SMESH_ANGLES</source>
+        <translation>Rotation angles</translation>
      </message>
  </context>
  <context>
@@ -5072,7 +6111,7 @@ Please select valid object and try again</translation>
      </message>
      <message>
          <source>CURRENT_DIALOG</source>
-        <translation>Current Group</translation>
+        <translation>Current Dialog</translation>
      </message>
      <message>
          <source>EDGES_TLT</source>
@@ -5108,7 +6147,7 @@ Please select valid object and try again</translation>
      </message>
      <message>
          <source>SHAPE_IS_NOT_A_CYLINDER</source>
-        <translation>&quot;%1&quot; is not a cylinderical face
+        <translation>&quot;%1&quot; is not a cylindrical face
  Please select a cylindrical face and try again</translation>
      </message>
      <message>
@@ -5306,6 +6345,10 @@ Please check input data and try again</translation>
          <source>ASPECT_RATIO_3D</source>
          <translation>Aspect ratio 3D</translation>
      </message>
+    <message>
+        <source>WARPING_3D</source>
+        <translation>Warping 3D</translation>
+    </message>
      <message>
          <source>BAD_ORIENTED_VOLUME</source>
          <translation>Bad oriented volume</translation>
@@ -5326,6 +6369,10 @@ Please check input data and try again</translation>
          <source>OVER_CONSTRAINED_FACE</source>
          <translation>Over-constrained faces</translation>
      </message>
+    <message>
+        <source>BELONG_TO_MESH_GROUP</source>
+        <translation>Belong to Mesh Group</translation>
+    </message>
      <message>
          <source>BELONG_TO_CYLINDER</source>
          <translation>Belong to Cylinder</translation>
@@ -5362,10 +6409,14 @@ Please check input data and try again</translation>
          <source>CONNECTED_ELEMS</source>
          <translation>Elements of a domain</translation>
      </message>
-  <message>
-    <source>NUMBEROFNODESINELEMENT</source>
-    <translation>Number Of Nodes In Element</translation>
-  </message>
+    <message>
+        <source>NODE_CONN_NUMBER</source>
+        <translation>Connectivity number</translation>
+    </message>
+    <message>
+        <source>NUMBEROFNODESINELEMENT</source>
+        <translation>Number Of Nodes In Element</translation>
+    </message>
      <message>
          <source>COPY_FROM</source>
          <translation>Copy from...</translation>
@@ -5435,6 +6486,14 @@ Please enter correct value and try again</translation>
          <source>LENGTH2D</source>
          <translation>Length 2D</translation>
      </message>
+    <message>
+        <source>LENGTH3D</source>
+        <translation>Length 3D</translation>
+    </message>
+    <message>
+        <source>DEFLECTION2D</source>
+        <translation>Deflection 2D</translation>
+    </message>
      <message>
          <source>LESS_THAN</source>
          <translation>Less than</translation>
@@ -5517,6 +6576,10 @@ Please enter correct value and try again</translation>
          <source>VOLUME_3D</source>
          <translation>Volume</translation>
      </message>
+    <message>
+        <source>SCALED_JACOBIAN</source>
+        <translation>Scaled Jacobian</translation>
+    </message>
      <message>
          <source>WARPING</source>
          <translation>Warping</translation>
@@ -5531,7 +6594,7 @@ Please enter correct value and try again</translation>
      </message>
      <message>
          <source>ELEMENTS</source>
-        <translation>Elements</translation>
+        <translation>All</translation>
      </message>
      <message>
          <source>ENTITY_TYPE</source>
@@ -5623,18 +6686,22 @@ Please enter correct value and try again</translation>
      </message>
      <message>
          <source>ENTITY_TYPE_21</source>
-        <translation>OCTA12</translation>
+        <translation>PENTA18</translation>
      </message>
      <message>
          <source>ENTITY_TYPE_22</source>
-        <translation>POLYEDRE</translation>
+        <translation>OCTA12</translation>
      </message>
      <message>
          <source>ENTITY_TYPE_23</source>
-        <translation>QPOLYEDRE</translation>
+        <translation>POLYEDRE</translation>
      </message>
      <message>
          <source>ENTITY_TYPE_24</source>
+        <translation>QPOLYEDRE</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_25</source>
          <translation>BALL</translation>
      </message>
      <message>
@@ -5719,8 +6786,8 @@ Please specify non-empty name and try again</translation>
  Please specify them and try again</translation>
      </message>
      <message>
-        <source>NAME</source>
-        <translation>Name</translation>
+        <source>RESULT</source>
+        <translation>Result</translation>
      </message>
      <message>
          <source>OBJECT_1</source>
@@ -5732,7 +6799,7 @@ Please specify them and try again</translation>
      </message>
      <message>
          <source>RESULT_NAME</source>
-        <translation>Result name</translation>
+        <translation>Group name</translation>
      </message>
      <message>
          <source>TOOL_OBJECT</source>
@@ -5743,13 +6810,6 @@ Please specify them and try again</translation>
          <translation>Union of two groups</translation>
      </message>
  </context>
-<context>
-    <name>SMESHGUI_GroupDlg</name>
-    <message>
-        <source>SELECT_ALL</source>
-        <translation>Select All</translation>
-    </message>
-</context>
  <context>
      <name>SMESHGUI_UnionGroupsDlg</name>
      <message>
@@ -5761,27 +6821,35 @@ Please specify them and try again</translation>
      <name>SMESHGUI_DimGroupDlg</name>
      <message>
          <source>CREATE_GROUP_OF_UNDERLYING_ELEMS</source>
-        <translation>Create group of underlying entities</translation>
+        <translation>Group based on nodes of other groups</translation>
      </message>
      <message>
          <source>ELEMENTS_TYPE</source>
          <translation>Elements type</translation>
      </message>
      <message>
-        <source>NODE</source>
-        <translation>Node</translation>
+        <source>UNDERLYING_ENTITIES_ONLY</source>
+        <translation>Include underlying entities only</translation>
      </message>
      <message>
-        <source>EDGE</source>
-        <translation>Edge</translation>
+        <source>NUMBER_OF_COMMON_NODES</source>
+        <translation>Number of common nodes</translation>
      </message>
      <message>
-        <source>FACE</source>
-        <translation>Face</translation>
+        <source>ALL</source>
+        <translation>All</translation>
      </message>
      <message>
-        <source>VOLUME</source>
-        <translation>Volume</translation>
+        <source>MAIN</source>
+        <translation>Main</translation>
+    </message>
+    <message>
+        <source>AT_LEAST_ONE</source>
+        <translation>At least one</translation>
+    </message>
+    <message>
+        <source>MAJORITY</source>
+        <translation>Majority</translation>
      </message>
  </context>
  <context>
@@ -5809,36 +6877,154 @@ Please specify them and try again</translation>
  <context>
      <name>SMESHGUI_MakeNodeAtPointDlg</name>
      <message>
-        <source>AUTO_SEARCH</source>
-        <translation>Find closest to destination</translation>
+        <source>AUTO_SEARCH</source>
+        <translation>Find closest to destination</translation>
+    </message>
+    <message>
+        <source>CAPTION</source>
+        <translation>Move node</translation>
+    </message>
+    <message>
+        <source>DESTINATION</source>
+        <translation>Destination</translation>
+    </message>
+    <message>
+        <source>DESTINATION_BY_MOUSE</source>
+        <translation>Destination by mouse click</translation>
+    </message>
+    <message>
+        <source>MOVE_NODE</source>
+        <translation>Move node</translation>
+    </message>
+    <message>
+        <source>METHOD</source>
+        <translation>Method</translation>
+    </message>
+    <message>
+        <source>NODE_2MOVE</source>
+        <translation>Node to move</translation>
+    </message>
+    <message>
+        <source>NODE_2MOVE_ID</source>
+        <translation>ID</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_MakeNodeAtPointOp</name>
+    <message>
+        <source>INVALID_ID</source>
+        <translation>Node ID is invalid</translation>
+    </message>
+    <message>
+        <source>INVALID_MESH</source>
+        <translation>Mesh to modify not selected</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_AddNodeOnSegmentDlg</name>
+    <message>
+        <source>CAPTION</source>
+        <translation>Add node to segment</translation>
+    </message>
+    <message>
+        <source>SEGMENT_GROUP</source>
+        <translation>Edge between neighboring triangles</translation>
+    </message>
+    <message>
+        <source>SEGMENT</source>
+        <translation>Edge</translation>
+    </message>
+    <message>
+        <source>POSITION_GROUP</source>
+        <translation>Node on Edge</translation>
+    </message>
+    <message>
+        <source>POSITION</source>
+        <translation>Location by mouse click</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_AddNodeOnSegmentOp</name>
+    <message>
+        <source>INVALID_EDGE</source>
+        <translation>Edge is invalid</translation>
+    </message>
+    <message>
+        <source>INVALID_MESH</source>
+        <translation>Mesh to modify not selected</translation>
+    </message>
+    <message>
+        <source>NO_ELEMENTS</source>
+        <translation>Edge belongs to none face</translation>
+    </message>
+    <message>
+        <source>VOLUME_FOUND</source>
+        <translation>Can't split an edge of a volume</translation>
+    </message>
+    <message>
+        <source>NOT_TRIANGLE_FACE_FOUND</source>
+        <translation>Operation applies to triangles only</translation>
+    </message>
+    <message>
+        <source>BAD_POSITION</source>
+        <translation>Position on edge is incorrect</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_AddNodeOnFaceDlg</name>
+    <message>
+        <source>CAPTION</source>
+        <translation>Add node to triangle</translation>
+    </message>
+    <message>
+        <source>FACE_GROUP</source>
+        <translation>Triangle to split</translation>
+    </message>
+    <message>
+        <source>FACE_ID</source>
+        <translation>ID</translation>
+    </message>
+    <message>
+        <source>XYZ_GROUP</source>
+        <translation>Node location by mouse click</translation>
      </message>
      <message>
-        <source>CAPTION</source>
-        <translation>Move node</translation>
+        <source>XYZ_NODE_ON_FACE</source>
+        <translation>Node on face</translation>
      </message>
+</context>
+<context>
+    <name>SMESHGUI_AddNodeOnFaceOp</name>
      <message>
-        <source>DESTINATION</source>
-        <translation>Destination</translation>
+        <source>INVALID_MESH</source>
+        <translation>Mesh to modify not selected</translation>
      </message>
      <message>
-        <source>MOVE_NODE</source>
-        <translation>Move node</translation>
+        <source>NOT_FACE</source>
+        <translation>Not a face selected</translation>
      </message>
      <message>
-        <source>METHOD</source>
-        <translation>Method</translation>
+        <source>INVALID_ID</source>
+        <translation>Face ID is invalid</translation>
      </message>
+</context>
+<context>
+    <name>SMESHGUI_RemoveNodeReconnectionDlg</name>
      <message>
-        <source>NODE_2MOVE</source>
-        <translation>Node to move</translation>
+        <source>CAPTION</source>
+        <translation>Remove Node with Reconnection</translation>
      </message>
      <message>
-        <source>NODE_2MOVE_ID</source>
+        <source>NODE_2REMOVE_ID</source>
          <translation>ID</translation>
      </message>
+    <message>
+        <source>NODE_2REMOVE</source>
+        <translation>Node</translation>
+    </message>
  </context>
  <context>
-    <name>SMESHGUI_MakeNodeAtPointOp</name>
+    <name>SMESHGUI_RemoveNodeReconnectionOp</name>
      <message>
          <source>INVALID_ID</source>
          <translation>Node ID is invalid</translation>
@@ -5910,8 +7096,12 @@ Please specify them and try again</translation>
          <translation>3D</translation>
      </message>
      <message>
-        <source>EDIT_MESH_SUBMESH</source>
-        <translation>Edit mesh/sub-mesh</translation>
+        <source>EDIT_MESH</source>
+        <translation>Edit mesh</translation>
+    </message>
+    <message>
+        <source>EDIT_SUBMESH</source>
+        <translation>Edit sub-mesh</translation>
      </message>
      <message>
          <source>GEOMETRY</source>
@@ -5919,16 +7109,24 @@ Please specify them and try again</translation>
      </message>
      <message>
          <source>HYPOTHESES_SETS</source>
-        <translation>Assign a set of hypotheses</translation>
+        <translation>Assign a set of automatic hypotheses</translation>
      </message>
      <message>
          <source>MESH</source>
          <translation>Mesh</translation>
      </message>
+    <message>
+        <source>MESH_TYPE</source>
+        <translation>Mesh type</translation>
+    </message>
      <message>
          <source>NAME</source>
          <translation>Name</translation>
      </message>
+    <message>
+        <source>CREATE_ALL_GROUPS</source>
+        <translation>Create all Groups on Geometry</translation>
+    </message>
  </context>
  <context>
      <name>SMESHGUI_MeshOp</name>
@@ -5938,16 +7136,22 @@ Please specify them and try again</translation>
      </message>
      <message>
          <source>EDIT_SUBMESH_QUESTION</source>
-        <translation>A submesh on the selected geometry already exists.
- Do you want to edit this submesh?</translation>
+        <translation>A sub-mesh on the selected geometry already exists.
+ Do you want to edit this sub-mesh?</translation>
      </message>
      <message>
          <source>SUBMESH_NOT_ALLOWED</source>
-        <translation>No sense in creating a submesh ignored by global algorithm &quot;%1&quot;</translation>
+        <translation>No sense in creating a sub-mesh ignored by global algorithm &quot;%1&quot;</translation>
+    </message>
+    <message>
+        <source>GEOMETRY_OBJECT_IS_NOT_DEFINED_MESH</source>
+        <translation>Geometry object is not defined.
+Do you want to create an empty mesh
+without algorithms and hypotheses? </translation>
      </message>
      <message>
-        <source>GEOMETRY_OBJECT_IS_NOT_DEFINED</source>
-        <translation>Geometry object is not defined
+        <source>GEOMETRY_OBJECT_IS_NOT_DEFINED_SUBMESH</source>
+        <translation>Geometry object is not defined.
  Please specify it and try again</translation>
      </message>
      <message>
@@ -5979,6 +7183,26 @@ Please specify it and try again</translation>
          <source>MESH_IS_NULL</source>
          <translation>Mesh is null</translation>
      </message>
+    <message>
+        <source>MT_ANY</source>
+        <translation>Any</translation>
+    </message>
+    <message>
+        <source>MT_HEXAHEDRAL</source>
+        <translation>Hexahedral</translation>
+    </message>
+    <message>
+        <source>MT_TETRAHEDRAL</source>
+        <translation>Tetrahedral</translation>
+    </message>
+    <message>
+        <source>MT_TRIANGULAR</source>
+        <translation>Triangular</translation>
+    </message>
+    <message>
+        <source>MT_QUADRILATERAL</source>
+        <translation>Quadrilateral</translation>
+    </message>
      <message>
          <source>NAME_OF_MESH_IS_EMPTY</source>
          <translation>Name of mesh is empty
@@ -5986,7 +7210,7 @@ Please enter valid name and try again</translation>
      </message>
      <message>
          <source>NAME_OF_SUBMESH_IS_EMPTY</source>
-        <translation>Name of submesh is empty
+        <translation>Name of sub-mesh is empty
  Please enter valid name and try again</translation>
      </message>
      <message>
@@ -5994,6 +7218,14 @@ Please enter valid name and try again</translation>
          <translation>There is no object for editing. Please
  select mesh or sub-mesh and try again</translation>
      </message>
+    <message>
+        <source>CONCURRENT_SUBMESH_APPEARS</source>
+        <translation>
+The assigned algorithm has the same priority as one assigned to an
+adjacent sub-mesh, hence it&apos;s undefined which algorithm to use for
+meshing boundary shared by two sub-meshes. Would you like to set
+the order of sub-mesh computation? </translation>
+    </message>
  </context>
  <context>
      <name>SMESHGUI_MeshPatternDlg</name>
@@ -6156,6 +7388,14 @@ It is impossible to read point coordinates from file</translation>
          <source>NONE</source>
          <translation>&lt;None&gt;</translation>
      </message>
+    <message>
+        <source>DEFAULT</source>
+        <translation>&lt;Default&gt;</translation>
+    </message>
+    <message>
+        <source>SELECT</source>
+        <translation>&lt;Select&gt;</translation>
+    </message>
  </context>
  <context>
      <name>SMESHGUI_MultiEditDlg</name>
@@ -6201,10 +7441,10 @@ It is impossible to read point coordinates from file</translation>
      </message>
  </context>
  <context>
-    <name>SMESHGUI_CuttingIntoTetraDlg</name>
+    <name>SMESHGUI_SplitVolumesDlg</name>
      <message>
          <source>CAPTION</source>
-        <translation>Splitting volumes into tetrahedra</translation>
+        <translation>Splitting volumes</translation>
      </message>
      <message>
          <source>SPLIT_METHOD</source>
@@ -6222,6 +7462,34 @@ It is impossible to read point coordinates from file</translation>
          <source>SPLIT_HEX_TO_24_TETRA</source>
          <translation>Into 24 tetrahedra</translation>
      </message>
+    <message>
+        <source>SPLIT_HEX_TO_2_PRISMS</source>
+        <translation>Into 2 prisms</translation>
+    </message>
+    <message>
+        <source>SPLIT_HEX_TO_4_PRISMS</source>
+        <translation>Into 4 Prisms</translation>
+    </message>
+    <message>
+        <source>TARGET_ELEM_TYPE</source>
+        <translation>Target element type</translation>
+    </message>
+    <message>
+        <source>FACET_TO_SPLIT</source>
+        <translation>Facet to split</translation>
+    </message>
+    <message>
+        <source>START_POINT</source>
+        <translation>Hexa location</translation>
+    </message>
+    <message>
+        <source>FACET_NORMAL</source>
+        <translation>Facet normal</translation>
+    </message>
+    <message>
+        <source>ALL_DOMAINS</source>
+        <translation>All domains</translation>
+    </message>
  </context>
  <context>
      <name>SMESHGUI_PrecisionDlg</name>
@@ -6249,8 +7517,8 @@ It is impossible to read point coordinates from file</translation>
          <translation>Preview</translation>
      </message>
      <message>
-        <source>REVOLUTION_1D</source>
-        <translation>Revolution of 1D elements</translation>
+        <source>REVOLUTION</source>
+        <translation>Revolution</translation>
      </message>
      <message>
          <source>REVOLUTION_2D</source>
@@ -6383,6 +7651,42 @@ It is impossible to read point coordinates from file</translation>
          <source>SIDE_2</source>
          <translation>Side 2</translation>
      </message>
+    <message>
+        <source>AUTO_SEWING</source>
+        <translation>Auto Sewing</translation>
+    </message>
+    <message>
+        <source>COINCIDENT_FREE_BORDERS</source>
+        <translation>Coincident Free Borders</translation>
+    </message>
+    <message>
+        <source>DETECT</source>
+        <translation>Detect</translation>
+    </message>
+    <message>
+        <source>SELECT_ALL</source>
+        <translation>Select all</translation>
+    </message>
+    <message>
+        <source>EDIT_SELECTED_GROUP</source>
+        <translation>Edit Selected Group</translation>
+    </message>
+    <message>
+        <source>STEP</source>
+        <translation>Step</translation>
+    </message>
+    <message>
+        <source>NO_BORDERS_TO_SEW</source>
+        <translation>No free borders to sew found</translation>
+    </message>
+    <message>
+        <source>NOT_ALL_BORDERS_SEWED</source>
+        <translation>%1 of %2 groups of borders sewed</translation>
+    </message>
+    <message>
+        <source>ALL_BORDERS_SEWED</source>
+        <translation>%1 group(s) of borders sewed</translation>
+    </message>
  </context>
  <context>
      <name>SMESHGUI_ShapeByMeshDlg</name>
@@ -6479,19 +7783,27 @@ It is impossible to read point coordinates from file</translation>
          <source>SMESH_CREATE_GROUP_FROM_GEOM</source>
          <translation>Create Groups from Geometry</translation>
      </message>
+    <message>
+        <source>ELEMENTS</source>
+        <translation>Elements</translation>
+    </message>
+    <message>
+        <source>ELEMENTS_TOOLTIP</source>
+        <translation>No 0D elements</translation>
+    </message>
  </context>
  <context>
      <name>SMESHGUI_MeshOrderDlg</name>
      <message>
          <source>SMESH_MESHORDER_TITLE</source>
-        <translation>Order of submesh in meshing process</translation>
+        <translation>Order of sub-mesh in meshing process</translation>
      </message>
  </context>
  <context>
      <name>SMESHGUI_MeshOrderOp</name>
      <message>
          <source>SMESH_NO_CONCURENT_MESH</source>
-        <translation>No concurent submeshes detected</translation>
+        <translation>No concurrent sub-meshes detected</translation>
      </message>
  </context>
  <context>
@@ -6500,6 +7812,10 @@ It is impossible to read point coordinates from file</translation>
          <source>CLIP_PLANES</source>
          <translation>Clipping planes</translation>
      </message>
+    <message>
+        <source>IS_OPENGL_CLIPPING</source>
+        <translation>OpenGL clipping</translation>
+    </message>
      <message>
          <source>MESHES_SUBMESHES_GROUPS</source>
          <translation>Meshes, sub-meshes and groups</translation>
@@ -6560,6 +7876,30 @@ It is impossible to read point coordinates from file</translation>
          <source>NO_PLANES</source>
          <translation>No planes</translation>
      </message>
+    <message>
+        <source>ABSOLUTE</source>
+        <translation>Absolute</translation>
+    </message>
+    <message>
+        <source>RELATIVE</source>
+        <translation>Relative</translation>
+    </message>
+    <message>
+        <source>BASE_POINT</source>
+        <translation>Base point</translation>
+    </message>
+    <message>
+        <source>DIRECTION</source>
+        <translation>Direction</translation>
+    </message>
+    <message>
+        <source>RESET</source>
+        <translation>Reset</translation>
+    </message>
+    <message>
+        <source>INVERT</source>
+        <translation>Invert</translation>
+    </message>
  </context>
  <context>
      <name>SMESHGUI_DuplicateNodesDlg</name>
@@ -6587,6 +7927,10 @@ It is impossible to read point coordinates from file</translation>
          <source>DUPLICATION_ONLY_ELEMS</source>
          <translation>Duplicate elements only</translation>
      </message>
+    <message>
+        <source>DUPLICATION_GROUP_BOUNDARY</source>
+        <translation>Duplicate nodes on group boundaries</translation>
+    </message>
      <message>
          <source>GROUP_ELEMS_TO_DUPLICATE</source>
          <translation>Group of elements to duplicate</translation>
@@ -6599,6 +7943,10 @@ It is impossible to read point coordinates from file</translation>
          <source>GROUP_ELEMS_TO_REPLACE</source>
          <translation>Group of elements to replace nodes with new ones</translation>
      </message>
+    <message>
+        <source>GROUP_VOLUME_GROUPS</source>
+        <translation>Groups (faces or volumes)</translation>
+    </message>
      <message>
          <source>CONSTRUCT_NEW_GROUP_NODES</source>
          <translation>Construct group with newly created nodes</translation>
@@ -6607,7 +7955,30 @@ It is impossible to read point coordinates from file</translation>
          <source>CONSTRUCT_NEW_GROUP_ELEMENTS</source>
          <translation>Construct group with newly created elements</translation>
      </message>
+    <message>
+        <source>CREATE_JOINT_ELEMENTS</source>
+        <translation>Create joint elements</translation>
+    </message>
+    <message>
+        <source>ON_ALL_BOUNDARIES</source>
+        <translation>On all boundaries</translation>
+    </message>
+    <message>
+        <source>GENERATE_GROUPS</source>
+        <translation>Generate</translation>
+    </message>
  </context>
+<context>
+    <name>SMESHGUI_MakeFull2DFrom3DDlg</name>
+    <message>
+        <source>CAPTION</source>
+        <translation>Create 2D mesh from 3D elements</translation>
+    </message>
+    <message>
+        <source>2D_FROM_3D_ELEMENTS</source>
+        <translation>2D from 3D</translation>
+    </message>
+</context>    
  <context>
      <name>SMESHGUI_Make2DFrom3DDlg</name>
      <message>
@@ -6659,6 +8030,43 @@ It is impossible to read point coordinates from file</translation>
          <translation>Create group</translation>
      </message>
  </context>
+<context>
+    <name>SMESHGUI_MakeFull2DFrom3DOp</name>
+    <message>
+        <source>NB_ADDED</source>
+        <translation>%1 boundary elements have been added</translation>
+    </message>
+    <message>
+        <source>WRONG_GROUPS</source>
+        <translation>The following groups have not been processed
+as they are of improper type:
+%1</translation>
+    </message>
+    <message>
+        <source>SMESH_ERR_NO_INPUT_MESH</source>
+        <translation>Source mesh is not specified</translation>
+    </message>
+    <message>
+        <source>SMESH_TOO_MANY_MESHES</source>
+        <translation>Only one mesh can be processed at once</translation>
+    </message>
+    <message>
+        <source>SMESH_NOT_ONLY_GROUPS</source>
+        <translation>Can&apos;t process meshes and groups at once</translation>
+    </message>
+    <message>
+        <source>SMESH_ERR_NO_3D_ELEMENTS</source>
+        <translation>The source objects do not contain 3D elements</translation>
+    </message>
+    <message>
+        <source>SMESH_ERR_MESH_NAME_NOT_SPECIFIED</source>
+        <translation>New mesh name is not specified</translation>
+    </message>
+    <message>
+        <source>SMESH_ERR_GRP_NAME_NOT_SPECIFIED</source>
+        <translation>Group name is not specified</translation>
+    </message>
+</context>
  <context>
      <name>SMESHGUI_Make2DFrom3DOp</name>
      <message>
@@ -6681,7 +8089,7 @@ as they are of improper type:
      </message>
      <message>
          <source>SMESH_NOT_ONLY_GROUPS</source>
-        <translation>Can't process meshes and groups at once</translation>
+        <translation>Can&apos;t process meshes and groups at once</translation>
      </message>
      <message>
          <source>SMESH_ERR_NO_3D_ELEMENTS</source>
@@ -6701,7 +8109,7 @@ as they are of improper type:
      </message>
  </context>
  <context>
-    <name>SMESHGUI_MeshInfo</name>
+    <name>SMESHGUI_BaseInfo</name>
      <message>
          <source>BASE_INFO</source>
          <translation>Base information</translation>
@@ -6734,6 +8142,10 @@ as they are of improper type:
          <source>QUADRATIC_LAB</source>
          <translation>Quadratic</translation>
      </message>
+    <message>
+        <source>BI_QUADRATIC_LAB</source>
+        <translation>Bi-Quadratic</translation>
+    </message>
      <message>
          <source>0D_LAB</source>
          <translation>0D:</translation>
@@ -6826,6 +8238,18 @@ as they are of improper type:
          <source>OBJECT_GROUP_BALLS</source>
          <translation>Group of balls</translation>
      </message>
+    <message>
+        <source>OBJECT_GROUP_STANDALONE</source>
+        <translation>(standalone)</translation>
+    </message>
+    <message>
+        <source>OBJECT_GROUP_GEOM</source>
+        <translation>(on geometry)</translation>
+    </message>
+    <message>
+        <source>OBJECT_GROUP_FILTER</source>
+        <translation>(on filter)</translation>
+    </message>
      <message>
          <source>BUT_LOAD_MESH</source>
          <translation>Load mesh from server</translation>
@@ -6861,6 +8285,14 @@ as they are of improper type:
          <source>ELEM_MODE</source>
          <translation>Element</translation>
      </message>
+    <message>
+        <source>GROUP_MODE</source>
+        <translation>Group</translation>
+    </message>
+    <message>
+        <source>SHOW_IDS</source>
+        <translation>Show IDs</translation>
+    </message>
      <message>
          <source>BUT_DUMP_MESH</source>
          <translation>&amp;Dump</translation>
@@ -6888,6 +8320,10 @@ as they are of improper type:
          <source>COORDINATES</source>
          <translation>Coordinates</translation>
      </message>
+    <message>
+        <source>NB_NODES</source>
+        <translation>Nb nodes</translation>
+    </message>
      <message>
          <source>CONNECTIVITY</source>
          <translation>Connectivity</translation>
@@ -6896,6 +8332,10 @@ as they are of improper type:
          <source>GRAVITY_CENTER</source>
          <translation>Gravity Center</translation>
      </message>
+    <message>
+        <source>NORMAL_VECTOR</source>
+        <translation>Normal</translation>
+    </message>
      <message>
          <source>NODE</source>
          <translation>Node</translation>
@@ -7044,8 +8484,8 @@ as they are of improper type:
  <context>
      <name>SMESHGUI_TreeElemInfo</name>
      <message>
-      <source>SHOW_ITEM_INFO</source>
-      <translation>Show info</translation>
+        <source>SHOW_ITEM_INFO</source>
+        <translation>Show info</translation>
      </message>
      <message>
          <source>PROPERTY</source>
@@ -7182,6 +8622,18 @@ as they are of improper type:
          <source>FILE_NAME</source>
          <translation>File name</translation>
      </message>
+    <message>
+        <source>FILE_SIZE</source>
+        <translation>Size</translation>
+    </message>
+    <message>
+        <source>FILE_VERSION</source>
+        <translation>Version</translation>
+    </message>
+    <message>
+        <source>VERSION_UNKNOWN</source>
+        <translation>Unknown</translation>
+    </message>
      <message>
          <source>STANDALONE_MESH</source>
          <translation>Standalone</translation>
@@ -7245,6 +8697,10 @@ as they are of improper type:
          <source>NUMBER_OF_THE_FREE_NODES</source>
          <translation>Number of the free nodes</translation>
      </message>
+    <message>
+        <source>MAX_NODE_CONNECTIVITY</source>
+        <translation>Max. number of connected elements</translation>
+    </message>
      <message>
          <source>DOUBLE_NODES_TOLERANCE</source>
          <translation>Double nodes tolerance</translation>
@@ -7268,7 +8724,7 @@ as they are of improper type:
      <message>
          <source>NUMBER_OF_THE_DOUBLE_FACES</source>
          <translation>Number of the double faces</translation>
-    </message>   
+    </message>
      <message>
          <source>ASPECT_RATIO_HISTOGRAM</source>
          <translation>Aspect Ratio histogram</translation>
@@ -7375,6 +8831,21 @@ as they are of improper type:
          <translation>Compute</translation>
      </message>
  </context>
+<context>
+    <name>SMESHGUI_Angle</name>
+    <message>
+        <source>NODES_GROUP</source>
+        <translation>Three nodes</translation>
+    </message>
+    <message>
+        <source>RESULT</source>
+        <translation>Angle in degrees</translation>
+    </message>
+    <message>
+        <source>COMPUTE</source>
+        <translation>Compute</translation>
+    </message>
+</context>
  <context>
      <name>SMESHGUI_CopyMeshDlg</name>
      <message>
@@ -7389,6 +8860,29 @@ as they are of improper type:
          <source>NEW_NAME</source>
          <translation>New Mesh Name</translation>
      </message>
+    <message>
+        <source>NEW_GEOM</source>
+        <translation>New Geometry</translation>
+    </message>
+    <message>
+        <source>REUSE_HYPOTHESES</source>
+        <translation>Reuse Hypotheses</translation>
+    </message>
+    <message>
+        <source>COPY_ELEMENTS</source>
+        <translation>Copy Mesh Elements</translation>
+    </message>
+    <message>
+        <source>OPERATION_FAILED</source>
+        <translation>Not all mesh sub-objects have been copied</translation>
+    </message>
+    <message>
+        <source>SUBSHAPES_NOT_FOUND_MSG</source>
+        <translation>
+Some sub-shapes not found in the new geometry. They are listed
+below along with dependent mesh objects that are marked with
+red in the Object Browser.</translation>
+    </message>
  </context>
  <context>
      <name>SMESHGUI_MeasureDlg</name>
@@ -7408,6 +8902,10 @@ as they are of improper type:
          <source>BASIC_PROPERTIES</source>
          <translation>Basic Properties</translation>
      </message>
+    <message>
+        <source>ANGLE</source>
+        <translation>Angle</translation>
+    </message>
  </context>
  <context>
      <name>SMESHGUI_BoundingBox</name>
@@ -7466,7 +8964,7 @@ as they are of improper type:
      <name>SMESHGUI_ReorientFacesDlg</name>
      <message>
          <source>CAPTION</source>
-        <translation>Reorient faces by vector</translation>
+        <translation>Reorient faces</translation>
      </message>
      <message>
          <source>REORIENT_FACES</source>
@@ -7480,6 +8978,10 @@ as they are of improper type:
          <source>OBJECT</source>
          <translation>Object</translation>
      </message>
+     <message>
+         <source>OBJECTS</source>
+         <translation>Objects</translation>
+     </message>
      <message>
          <source>POINT</source>
          <translation>Point</translation>
@@ -7496,6 +8998,18 @@ as they are of improper type:
          <source>ORIENTATION</source>
          <translation>Orientation</translation>
      </message>
+    <message>
+        <source>VOLUMES</source>
+        <translation>Volumes</translation>
+    </message>
+    <message>
+        <source>REF_GROUPS</source>
+        <translation>Ref. objects (optional)</translation>
+    </message>
+    <message>
+        <source>OUTSIDE_VOLUME_NORMAL</source>
+        <translation>Face normal outside volume</translation>
+    </message>
  </context>
  <context>
      <name>SMESHGUI_ReorientFacesOp</name>
@@ -7503,10 +9017,18 @@ as they are of improper type:
          <source>NO_OBJECT_SELECTED</source>
          <translation>No object selected</translation>
      </message>
+    <message>
+        <source>NO_VOLUME_OBJECT_SELECTED</source>
+        <translation>No volume object selected</translation>
+    </message>
      <message>
          <source>NO_FACES</source>
          <translation>Object includes no faces</translation>
      </message>
+    <message>
+        <source>NO_VOLUMES</source>
+        <translation>Volume object includes no volumes</translation>
+    </message>
      <message>
          <source>ZERO_SIZE_VECTOR</source>
          <translation>Zero size vector</translation>
@@ -7587,7 +9109,7 @@ as they are of improper type:
          <translation>Size:</translation>
      </message>
      <message>
-        <source>ORIENTATION_SCALE</source>
+        <source>SCALE_FACTOR</source>
          <translation>Scale:</translation>
      </message>
      <message>
@@ -7599,4 +9121,45 @@ as they are of improper type:
          <translation>Shrink coef:</translation>
      </message>
  </context>
+<context>
+    <name>SMESHGUI_DisplayEntitiesDlg</name>
+    <message>
+        <source>WRN_AT_LEAST_ONE</source>
+        <translation>At least one entity type should be chosen!</translation>
+    </message>
+</context>
+<context>
+    <name>SMESH_AdvOptionsWdg</name>
+    <message>
+        <source>ADD_OPTION_BTN</source>
+        <translation>Add option</translation>
+    </message>
+    <message>
+        <source>CHOICE</source>
+        <translation>Choice</translation>
+    </message>
+    <message>
+        <source>OPTION_NAME</source>
+        <translation>Option name</translation>
+    </message>
+    <message>
+        <source>OPTION_VALUE</source>
+        <translation>Option value</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_GenericHypothesisCreator</name>
+    <message>
+        <source>AverageLengthForHypoSet</source>
+        <translation>Mean Size</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_SpinBoxForbiddendRange</name>
+    <message>
+        <source>VALID_RANGE_NOVAR_MSG</source>
+        <translation>Specify a floating-point value in range [%1; %2) U (%3; %4]
+with %5-digit precision</translation>
+    </message>
+</context>
  </TS>