Revert wrongly integrated merge

[modules/smesh.git] / src / SMESHGUI / SMESH_msg_en.ts

diff --git a/src/SMESHGUI/SMESH_msg_en.ts b/src/SMESHGUI/SMESH_msg_en.ts
index c4ffdde6fc134127a0bab7c6dede761437e55a5d..cdbcfc114831ebd04ae8867dfd6cc02bc9e6f11d 100644 (file)
--- a/src/SMESHGUI/SMESH_msg_en.ts
+++ b/src/SMESHGUI/SMESH_msg_en.ts
@@ -190,7 +190,7 @@
     <message>
         <source>EDITERR_NO_MEDIUM_ON_GEOM</source>
         <translation>Some medium nodes not placed on geometry to avoid
-        distorting elements shown in magenta</translation>
+        distorting elements shown in magenta.</translation>
     </message>
     <message>
         <source>SMESH_GEOM</source>
@@ -308,6 +308,14 @@
         <source>MEN_COMPUTE</source>
         <translation>Compute</translation>
     </message>
+    <message>
+        <source>MEN_RE_COMPUTE</source>
+        <translation>Clear + Compute</translation>
+    </message>
+    <message>
+        <source>MEN_SHOW_ERRORS</source>
+        <translation>Show Compute Errors</translation>
+    </message>
     <message>
         <source>MEN_COMPUTE_SUBMESH</source>
         <translation>Compute Sub-mesh</translation>
@@ -994,7 +1002,7 @@
     </message>
     <message>
         <source>MEN_SAVE_DISTRIBUTION</source>
-        <translation>Export ...</translation>
+        <translation>Export the distribution...</translation>
     </message>
     <message>
         <source>MEN_SHOW_DISTRIBUTION</source>
@@ -1847,15 +1855,15 @@ Do you want to continue?</translation>
     </message>
     <message>
         <source>SMESH_EXTRUSION_TO_DISTANCE</source>
-        <translation>Extrusion To Distance</translation>
+        <translation>Extrusion to distance</translation>
     </message>
     <message>
         <source>SMESH_EXTRUSION_ALONG_VECTOR</source>
-        <translation>Extrusion Along Vector</translation>
+        <translation>Extrusion along vector</translation>
     </message>
     <message>
         <source>SMESH_EXTRUSION_BY_NORMAL</source>
-        <translation>Extrusion By Normal</translation>
+        <translation>Extrusion by normal</translation>
     </message>
     <message>
         <source>SMESH_FACE</source>
@@ -1940,7 +1948,7 @@ add the exported data to its contents?</translation>
         <translation>Height:</translation>
     </message>
     <message>
-        <source>SMESH_HEXAS</source>
+        <source>SMESH_HEXAHEDRON</source>
         <translation>Hexahedron</translation>
     </message>
     <message>
@@ -2292,6 +2300,10 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_NAME</source>
         <translation>Name</translation>
     </message>
+    <message>
+        <source>SMESH_NAMES</source>
+        <translation>Names</translation>
+    </message>
     <message>
         <source>SMESH_NODES</source>
         <translation>Nodes</translation>
@@ -2786,7 +2798,7 @@ Check algorithm documentation for supported geometry</translation>
         <translation>Symmetry</translation>
     </message>
     <message>
-        <source>SMESH_TETRAS</source>
+        <source>SMESH_TETRAHEDRON</source>
         <translation>Tetrahedron</translation>
     </message>
     <message>
@@ -4499,6 +4511,24 @@ It can&apos;t be deleted </translation>
         <source>STB_SORT_CHILD_ITEMS</source>
         <translation>Sort child items</translation>
     </message>
+    <message>
+        <source>MEN_BREAK_SHAPER_LINK</source>
+        <translation>Break link</translation>
+    </message>
+    <message>
+        <source>STB_BREAK_SHAPER_LINK</source>
+        <translation>Break link with Shaper model</translation>
+    </message>
+    <message>
+      <source>MSG_BREAK_SHAPER_LINK</source>
+      <translation>A link with Shaper model for object %1 will be broken.
+Continue?</translation>
+    </message>
+    <message>
+        <source>MSG_WARN_ON_GEOM_MODIF</source>
+        <translation>This action is prohibited since the geometry
+was changed and the mesh needs to be recomputed.</translation>
+    </message>
     <message>
         <source>SMESH_ADVANCED</source>
         <translation>Advanced</translation>
@@ -4547,6 +4577,10 @@ It can&apos;t be deleted </translation>
         <source>SMESH_3D_ALGO_GROUP_ADVANCED</source>
         <translation>Advanced</translation>
     </message>
+    <message>
+        <source>SMESH_HEX_PRISM</source>
+        <translation>Hexagonal Prism</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_FieldSelectorWdg</name>
@@ -4575,7 +4609,7 @@ It can&apos;t be deleted </translation>
     </message>
     <message>
         <source>NB_GROUPS_CREATED</source>
-        <translation>%1 groups of faces created</translation>
+        <translation>%1 group(s) of faces created</translation>
     </message>
 </context>
 <context>
@@ -4651,6 +4685,10 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_NB_SEGMENTS</source>
         <translation>Default Number of Segments</translation>
     </message>
+    <message>
+        <source>PREF_USE_MESHGEMS_HYPOSET</source>
+        <translation>Use MeshGems meshers when assigning set of hypotheses</translation>
+    </message>
     <message>
         <source>SMESH_PREF_MESH_LOADING</source>
         <translation>Mesh loading</translation>
@@ -4991,6 +5029,74 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_PREVIEW_CHUNK_SIZE</source>
         <translation>Sub-shapes preview chunk size</translation>
     </message>
+    <message>
+        <source>INFO_WELCOME_TO_SMESH</source>
+        <translation>Welcome to Mesh</translation>
+    </message>
+    <message>
+        <source>INFO_GRP_CREATE_MESH</source>
+        <translation>Create mesh</translation>
+    </message>
+    <message>
+        <source>INFO_DEFINE_ALGOS</source>
+        <translation>Choose algorithms</translation>
+    </message>
+    <message>
+        <source>INFO_DEFINE_HYPOS</source>
+        <translation>Define hypotheses</translation>
+    </message>
+    <message>
+        <source>INFO_COMPUTE</source>
+        <translation>Compute</translation>
+    </message>
+    <message>
+        <source>INFO_REFINE</source>
+        <translation>Add refinements</translation>
+    </message>
+    <message>
+        <source>INFO_REFINE_LOCAL_SIZE</source>
+        <translation>via local sizes with some hypotheses</translation>
+    </message>
+    <message>
+        <source>INFO_REFINE_SUBMESH</source>
+        <translation>via sub-meshes</translation>
+    </message>
+    <message>
+        <source>INFO_GRP_IMPORT_MESH</source>
+        <translation>Import mesh</translation>
+    </message>
+    <message>
+        <source>INFO_AVAILABLE_FORMATS</source>
+        <translation>Available formats</translation>
+    </message>
+    <message>
+        <source>INFO_GRP_CHECK_MESH</source>
+        <translation> Check mesh quality</translation>
+    </message>
+    <message>
+        <source>INFO_DISPLAY</source>
+        <translation>Display mesh</translation>
+    </message>
+    <message>
+        <source>INFO_QUALITY_INFO</source>
+        <translation>Display some quality criteria</translation>
+    </message>
+    <message>
+        <source>INFO_QUALITY_AREA</source>
+        <translation>area</translation>
+    </message>
+    <message>
+        <source>INFO_QUALITY_VOLUME</source>
+        <translation>volume</translation>
+    </message>
+    <message>
+        <source>INFO_QUALITY_ASPECT_RATION</source>
+        <translation>aspect ration</translation>
+    </message>
+    <message>
+        <source>INFO_CLIPPING</source>
+        <translation>Add clipping planes</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_GroupDlg</name>
@@ -5490,6 +5596,10 @@ Please select a group and try again</translation>
         <source>KEEP_NODES</source>
         <translation>Nodes to keep during the merge</translation>
     </message>
+    <message>
+        <source>KEEP_ELEMENTS</source>
+        <translation>Elements to keep during the merge</translation>
+    </message>
     <message>
         <source>GROUP_SUBMESH</source>
         <translation>Groups and sub-meshes</translation>
@@ -5509,18 +5619,6 @@ Please select a group and try again</translation>
         <source>CANT_GET_TANGENT</source>
         <translation>Can&apos;t get tangent for one of the path nodes</translation>
     </message>
-    <message>
-        <source>EXTRUSION_0D</source>
-        <translation>Extrusion of 0D elements</translation>
-    </message>
-    <message>
-        <source>EXTRUSION_1D</source>
-        <translation>Extrusion of 1D elements</translation>
-    </message>
-    <message>
-        <source>EXTRUSION_2D</source>
-        <translation>Extrusion of 2D elements</translation>
-    </message>
     <message>
         <source>EXTRUSION_ALONG_PATH</source>
         <translation>Extrusion along a path</translation>
@@ -5531,7 +5629,7 @@ Please select a group and try again</translation>
     </message>
     <message>
         <source>LINEAR_ANGLES</source>
-        <translation>Linear variation of the angles</translation>
+        <translation>Linear variation of angles</translation>
     </message>
     <message>
         <source>NO_ELEMENTS_SELECTED</source>
@@ -5543,11 +5641,19 @@ Please select a group and try again</translation>
     </message>
     <message>
         <source>SMESH_ANGLES</source>
-        <translation>Rotation Angles</translation>
+        <translation>Rotation angles</translation>
     </message>
     <message>
         <source>SMESH_BASE_POINT</source>
-        <translation>Base Point</translation>
+        <translation>Base point</translation>
+    </message>
+    <message>
+        <source>SMESH_SCALES</source>
+        <translation>Scale factors</translation>
+    </message>
+    <message>
+        <source>LINEAR_SCALES</source>
+        <translation>Linear variation of factors</translation>
     </message>
     <message>
         <source>SMESH_PATH</source>
@@ -5567,11 +5673,11 @@ Please select a group and try again</translation>
     </message>
     <message>
         <source>SMESH_USE_ANGLES</source>
-        <translation>Use Angles</translation>
+        <translation>Use angles</translation>
     </message>
     <message>
         <source>SMESH_USE_BASE_POINT</source>
-        <translation>Use Base Point</translation>
+        <translation>Use base point</translation>
     </message>
     <message>
         <source>WRONG_ANGLES_NUMBER</source>
@@ -5580,18 +5686,6 @@ Please select a group and try again</translation>
 </context>
 <context>
     <name>SMESHGUI_ExtrusionDlg</name>
-    <message>
-        <source>EXTRUSION_0D</source>
-        <translation>Extrusion of nodes</translation>
-    </message>
-    <message>
-        <source>EXTRUSION_1D</source>
-        <translation>Extrusion of 1D elements</translation>
-    </message>
-    <message>
-        <source>EXTRUSION_2D</source>
-        <translation>Extrusion of 2D elements</translation>
-    </message>
     <message>
         <source>EXTRUSION_ALONG_LINE</source>
         <translation>Extrusion along a line</translation>
@@ -5606,15 +5700,23 @@ Please select a group and try again</translation>
     </message>
     <message>
         <source>SMESH_SCALES</source>
-        <translation>Scale Factors</translation>
+        <translation>Scale factors</translation>
     </message>
     <message>
         <source>LINEAR_SCALES</source>
-        <translation>Linear Variation of Scale Factors</translation>
+        <translation>Linear variation of factors</translation>
     </message>
     <message>
         <source>BASE_POINT</source>
-        <translation>Scaling Center</translation>
+        <translation>Base point</translation>
+    </message>
+    <message>
+        <source>LINEAR_ANGLES</source>
+        <translation>Linear variation of angles</translation>
+    </message>
+    <message>
+        <source>SMESH_ANGLES</source>
+        <translation>Rotation angles</translation>
     </message>
 </context>
 <context>
@@ -5997,6 +6099,10 @@ Please enter correct value and try again</translation>
         <source>LENGTH2D</source>
         <translation>Length 2D</translation>
     </message>
+    <message>
+        <source>LENGTH3D</source>
+        <translation>Length 3D</translation>
+    </message>
     <message>
         <source>DEFLECTION2D</source>
         <translation>Deflection 2D</translation>
@@ -6494,7 +6600,7 @@ Please specify them and try again</translation>
     </message>
     <message>
         <source>HYPOTHESES_SETS</source>
-        <translation>Assign a set of hypotheses</translation>
+        <translation>Assign a set of automatic hypotheses</translation>
     </message>
     <message>
         <source>MESH</source>
@@ -6508,6 +6614,10 @@ Please specify them and try again</translation>
         <source>NAME</source>
         <translation>Name</translation>
     </message>
+    <message>
+        <source>CREATE_ALL_GROUPS</source>
+        <translation>Create all Groups on Geometry</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_MeshOp</name>
@@ -6601,7 +6711,7 @@ select mesh or sub-mesh and try again</translation>
     </message>
     <message>
         <source>CONCURRENT_SUBMESH_APPEARS</source>
-        <translation> 
+        <translation>
 The assigned algorithm has the same priority as one assigned to an 
 adjacent sub-mesh, hence it&apos;s undefined which algorithm to use for
 meshing boundary shared by two sub-meshes. Would you like to set
@@ -7442,7 +7552,7 @@ as they are of improper type:
     </message>
 </context>
 <context>
-    <name>SMESHGUI_MeshInfo</name>
+    <name>SMESHGUI_BaseInfo</name>
     <message>
         <source>BASE_INFO</source>
         <translation>Base information</translation>
@@ -7571,6 +7681,18 @@ as they are of improper type:
         <source>OBJECT_GROUP_BALLS</source>
         <translation>Group of balls</translation>
     </message>
+    <message>
+        <source>OBJECT_GROUP_STANDALONE</source>
+        <translation>(standalone)</translation>
+    </message>
+    <message>
+        <source>OBJECT_GROUP_GEOM</source>
+        <translation>(on geometry)</translation>
+    </message>
+    <message>
+        <source>OBJECT_GROUP_FILTER</source>
+        <translation>(on filter)</translation>
+    </message>
     <message>
         <source>BUT_LOAD_MESH</source>
         <translation>Load mesh from server</translation>
@@ -7606,6 +7728,10 @@ as they are of improper type:
         <source>ELEM_MODE</source>
         <translation>Element</translation>
     </message>
+    <message>
+        <source>GROUP_MODE</source>
+        <translation>Group</translation>
+    </message>
     <message>
         <source>SHOW_IDS</source>
         <translation>Show IDs</translation>
@@ -7637,6 +7763,10 @@ as they are of improper type:
         <source>COORDINATES</source>
         <translation>Coordinates</translation>
     </message>
+    <message>
+        <source>NB_NODES</source>
+        <translation>Nb nodes</translation>
+    </message>
     <message>
         <source>CONNECTIVITY</source>
         <translation>Connectivity</translation>
@@ -7935,6 +8065,18 @@ as they are of improper type:
         <source>FILE_NAME</source>
         <translation>File name</translation>
     </message>
+    <message>
+        <source>FILE_SIZE</source>
+        <translation>Size</translation>
+    </message>
+    <message>
+        <source>FILE_VERSION</source>
+        <translation>Version</translation>
+    </message>
+    <message>
+        <source>VERSION_UNKNOWN</source>
+        <translation>Unknown</translation>
+    </message>
     <message>
         <source>STANDALONE_MESH</source>
         <translation>Standalone</translation>
@@ -8182,7 +8324,7 @@ as they are of improper type:
         <translation>
 Some sub-shapes not found in the new geometry. They are listed 
 below along with dependent mesh objects that are marked with
-with red in the Object Browser.</translation>
+red in the Object Browser.</translation>
     </message>
 </context>
 <context>
@@ -8440,4 +8582,11 @@ with red in the Object Browser.</translation>
         <translation>Option value</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_GenericHypothesisCreator</name>
+    <message>
+        <source>AverageLengthForHypoSet</source>
+        <translation>Mean Size</translation>
+    </message>
+</context>
 </TS>