bos #20282 EDF 22320 - general compute fails

[modules/smesh.git] / src / SMESHGUI / SMESH_msg_en.ts

diff --git a/src/SMESHGUI/SMESH_msg_en.ts b/src/SMESHGUI/SMESH_msg_en.ts
index 209a6bd8856c55ad027273bef7c4978952415768..ccad8714f9a9a6c01edeb60112cc57053918b452 100644 (file)
--- a/src/SMESHGUI/SMESH_msg_en.ts
+++ b/src/SMESHGUI/SMESH_msg_en.ts
@@ -308,6 +308,14 @@
         <source>MEN_COMPUTE</source>
         <translation>Compute</translation>
     </message>
+    <message>
+        <source>MEN_RE_COMPUTE</source>
+        <translation>Clear + Compute</translation>
+    </message>
+    <message>
+        <source>MEN_SHOW_ERRORS</source>
+        <translation>Show Compute Errors</translation>
+    </message>
     <message>
         <source>MEN_COMPUTE_SUBMESH</source>
         <translation>Compute Sub-mesh</translation>
@@ -1847,15 +1855,15 @@ Do you want to continue?</translation>
     </message>
     <message>
         <source>SMESH_EXTRUSION_TO_DISTANCE</source>
-        <translation>Extrusion To Distance</translation>
+        <translation>Extrusion to distance</translation>
     </message>
     <message>
         <source>SMESH_EXTRUSION_ALONG_VECTOR</source>
-        <translation>Extrusion Along Vector</translation>
+        <translation>Extrusion along vector</translation>
     </message>
     <message>
         <source>SMESH_EXTRUSION_BY_NORMAL</source>
-        <translation>Extrusion By Normal</translation>
+        <translation>Extrusion by normal</translation>
     </message>
     <message>
         <source>SMESH_FACE</source>
@@ -1940,7 +1948,7 @@ add the exported data to its contents?</translation>
         <translation>Height:</translation>
     </message>
     <message>
-        <source>SMESH_HEXAS</source>
+        <source>SMESH_HEXAHEDRON</source>
         <translation>Hexahedron</translation>
     </message>
     <message>
@@ -2292,6 +2300,10 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_NAME</source>
         <translation>Name</translation>
     </message>
+    <message>
+        <source>SMESH_NAMES</source>
+        <translation>Names</translation>
+    </message>
     <message>
         <source>SMESH_NODES</source>
         <translation>Nodes</translation>
@@ -2786,7 +2798,7 @@ Check algorithm documentation for supported geometry</translation>
         <translation>Symmetry</translation>
     </message>
     <message>
-        <source>SMESH_TETRAS</source>
+        <source>SMESH_TETRAHEDRON</source>
         <translation>Tetrahedron</translation>
     </message>
     <message>
@@ -4499,6 +4511,24 @@ It can&apos;t be deleted </translation>
         <source>STB_SORT_CHILD_ITEMS</source>
         <translation>Sort child items</translation>
     </message>
+    <message>
+        <source>MEN_BREAK_SHAPER_LINK</source>
+        <translation>Break link</translation>
+    </message>
+    <message>
+        <source>STB_BREAK_SHAPER_LINK</source>
+        <translation>Break link with Shaper model</translation>
+    </message>
+    <message>
+      <source>MSG_BREAK_SHAPER_LINK</source>
+      <translation>A link with Shaper model for object %1 will be broken.
+Continue?</translation>
+    </message>
+    <message>
+        <source>MSG_WARN_ON_GEOM_MODIF</source>
+        <translation>This action is prohibited since the geometry
+was changed and the mesh needs to be recomputed.</translation>
+    </message>
     <message>
         <source>SMESH_ADVANCED</source>
         <translation>Advanced</translation>
@@ -4547,6 +4577,10 @@ It can&apos;t be deleted </translation>
         <source>SMESH_3D_ALGO_GROUP_ADVANCED</source>
         <translation>Advanced</translation>
     </message>
+    <message>
+        <source>SMESH_HEX_PRISM</source>
+        <translation>Hexagonal Prism</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_FieldSelectorWdg</name>
@@ -4651,6 +4685,10 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_NB_SEGMENTS</source>
         <translation>Default Number of Segments</translation>
     </message>
+    <message>
+        <source>PREF_USE_MESHGEMS_HYPOSET</source>
+        <translation>Use MeshGems meshers when assigning set of hypotheses</translation>
+    </message>
     <message>
         <source>SMESH_PREF_MESH_LOADING</source>
         <translation>Mesh loading</translation>
@@ -4733,12 +4771,16 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>PREF_DISPLAY_MODE_GROUP</source>
-        <translation>Display mode</translation>
+        <translation>Display</translation>
     </message>
     <message>
         <source>PREF_DISPLAY_MODE</source>
         <translation>Default display mode</translation>
     </message>
+    <message>
+        <source>PREF_FITALL_ON_DISPLAYONLY</source>
+        <translation>Fit All upon Show Only</translation>
+    </message>
     <message>
         <source>PREF_ELEMENTS</source>
         <translation>Elements</translation>
@@ -5114,6 +5156,14 @@ Please, create VTK viewer and try again</translation>
         <source>MESHES</source>
         <translation>Meshes, sub-meshes, groups</translation>
     </message>
+    <message>
+        <source>NEW_MESH_NAME</source>
+        <translation>Create new mesh named</translation>
+    </message>
+    <message>
+        <source>MESH_APPEND_TO</source>
+        <translation>Append to mesh</translation>
+    </message>
     <message>
         <source>PROCESSING_IDENTICAL_GROUPS</source>
         <translation>Processing identical groups</translation>
@@ -5124,7 +5174,7 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>RESULT_NAME</source>
-        <translation>Result name</translation>
+        <translation>Result</translation>
     </message>
     <message>
         <source>UNITE</source>
@@ -5478,6 +5528,10 @@ Please select a group and try again</translation>
         <source>KEEP_NODES</source>
         <translation>Nodes to keep during the merge</translation>
     </message>
+    <message>
+        <source>KEEP_ELEMENTS</source>
+        <translation>Elements to keep during the merge</translation>
+    </message>
     <message>
         <source>GROUP_SUBMESH</source>
         <translation>Groups and sub-meshes</translation>
@@ -5497,18 +5551,6 @@ Please select a group and try again</translation>
         <source>CANT_GET_TANGENT</source>
         <translation>Can&apos;t get tangent for one of the path nodes</translation>
     </message>
-    <message>
-        <source>EXTRUSION_0D</source>
-        <translation>Extrusion of 0D elements</translation>
-    </message>
-    <message>
-        <source>EXTRUSION_1D</source>
-        <translation>Extrusion of 1D elements</translation>
-    </message>
-    <message>
-        <source>EXTRUSION_2D</source>
-        <translation>Extrusion of 2D elements</translation>
-    </message>
     <message>
         <source>EXTRUSION_ALONG_PATH</source>
         <translation>Extrusion along a path</translation>
@@ -5519,7 +5561,7 @@ Please select a group and try again</translation>
     </message>
     <message>
         <source>LINEAR_ANGLES</source>
-        <translation>Linear variation of the angles</translation>
+        <translation>Linear variation of angles</translation>
     </message>
     <message>
         <source>NO_ELEMENTS_SELECTED</source>
@@ -5531,11 +5573,19 @@ Please select a group and try again</translation>
     </message>
     <message>
         <source>SMESH_ANGLES</source>
-        <translation>Rotation Angles</translation>
+        <translation>Rotation angles</translation>
     </message>
     <message>
         <source>SMESH_BASE_POINT</source>
-        <translation>Base Point</translation>
+        <translation>Base point</translation>
+    </message>
+    <message>
+        <source>SMESH_SCALES</source>
+        <translation>Scale factors</translation>
+    </message>
+    <message>
+        <source>LINEAR_SCALES</source>
+        <translation>Linear variation of factors</translation>
     </message>
     <message>
         <source>SMESH_PATH</source>
@@ -5555,11 +5605,11 @@ Please select a group and try again</translation>
     </message>
     <message>
         <source>SMESH_USE_ANGLES</source>
-        <translation>Use Angles</translation>
+        <translation>Use angles</translation>
     </message>
     <message>
         <source>SMESH_USE_BASE_POINT</source>
-        <translation>Use Base Point</translation>
+        <translation>Use base point</translation>
     </message>
     <message>
         <source>WRONG_ANGLES_NUMBER</source>
@@ -5568,18 +5618,6 @@ Please select a group and try again</translation>
 </context>
 <context>
     <name>SMESHGUI_ExtrusionDlg</name>
-    <message>
-        <source>EXTRUSION_0D</source>
-        <translation>Extrusion of nodes</translation>
-    </message>
-    <message>
-        <source>EXTRUSION_1D</source>
-        <translation>Extrusion of 1D elements</translation>
-    </message>
-    <message>
-        <source>EXTRUSION_2D</source>
-        <translation>Extrusion of 2D elements</translation>
-    </message>
     <message>
         <source>EXTRUSION_ALONG_LINE</source>
         <translation>Extrusion along a line</translation>
@@ -5594,15 +5632,23 @@ Please select a group and try again</translation>
     </message>
     <message>
         <source>SMESH_SCALES</source>
-        <translation>Scale Factors</translation>
+        <translation>Scale factors</translation>
     </message>
     <message>
         <source>LINEAR_SCALES</source>
-        <translation>Linear Variation of Scale Factors</translation>
+        <translation>Linear variation of factors</translation>
     </message>
     <message>
         <source>BASE_POINT</source>
-        <translation>Scaling Center</translation>
+        <translation>Base point</translation>
+    </message>
+    <message>
+        <source>LINEAR_ANGLES</source>
+        <translation>Linear variation of angles</translation>
+    </message>
+    <message>
+        <source>SMESH_ANGLES</source>
+        <translation>Rotation angles</translation>
     </message>
 </context>
 <context>
@@ -5985,6 +6031,10 @@ Please enter correct value and try again</translation>
         <source>LENGTH2D</source>
         <translation>Length 2D</translation>
     </message>
+    <message>
+        <source>LENGTH3D</source>
+        <translation>Length 3D</translation>
+    </message>
     <message>
         <source>DEFLECTION2D</source>
         <translation>Deflection 2D</translation>
@@ -6482,7 +6532,7 @@ Please specify them and try again</translation>
     </message>
     <message>
         <source>HYPOTHESES_SETS</source>
-        <translation>Assign a set of hypotheses</translation>
+        <translation>Assign a set of automatic hypotheses</translation>
     </message>
     <message>
         <source>MESH</source>
@@ -6496,6 +6546,10 @@ Please specify them and try again</translation>
         <source>NAME</source>
         <translation>Name</translation>
     </message>
+    <message>
+        <source>CREATE_ALL_GROUPS</source>
+        <translation>Create all Groups on Geometry</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_MeshOp</name>
@@ -7430,7 +7484,7 @@ as they are of improper type:
     </message>
 </context>
 <context>
-    <name>SMESHGUI_MeshInfo</name>
+    <name>SMESHGUI_BaseInfo</name>
     <message>
         <source>BASE_INFO</source>
         <translation>Base information</translation>
@@ -7559,6 +7613,18 @@ as they are of improper type:
         <source>OBJECT_GROUP_BALLS</source>
         <translation>Group of balls</translation>
     </message>
+    <message>
+        <source>OBJECT_GROUP_STANDALONE</source>
+        <translation>(standalone)</translation>
+    </message>
+    <message>
+        <source>OBJECT_GROUP_GEOM</source>
+        <translation>(on geometry)</translation>
+    </message>
+    <message>
+        <source>OBJECT_GROUP_FILTER</source>
+        <translation>(on filter)</translation>
+    </message>
     <message>
         <source>BUT_LOAD_MESH</source>
         <translation>Load mesh from server</translation>
@@ -7594,6 +7660,10 @@ as they are of improper type:
         <source>ELEM_MODE</source>
         <translation>Element</translation>
     </message>
+    <message>
+        <source>GROUP_MODE</source>
+        <translation>Group</translation>
+    </message>
     <message>
         <source>SHOW_IDS</source>
         <translation>Show IDs</translation>
@@ -7625,6 +7695,10 @@ as they are of improper type:
         <source>COORDINATES</source>
         <translation>Coordinates</translation>
     </message>
+    <message>
+        <source>NB_NODES</source>
+        <translation>Nb nodes</translation>
+    </message>
     <message>
         <source>CONNECTIVITY</source>
         <translation>Connectivity</translation>
@@ -7923,6 +7997,18 @@ as they are of improper type:
         <source>FILE_NAME</source>
         <translation>File name</translation>
     </message>
+    <message>
+        <source>FILE_SIZE</source>
+        <translation>Size</translation>
+    </message>
+    <message>
+        <source>FILE_VERSION</source>
+        <translation>Version</translation>
+    </message>
+    <message>
+        <source>VERSION_UNKNOWN</source>
+        <translation>Unknown</translation>
+    </message>
     <message>
         <source>STANDALONE_MESH</source>
         <translation>Standalone</translation>
@@ -8170,7 +8256,7 @@ as they are of improper type:
         <translation>
 Some sub-shapes not found in the new geometry. They are listed 
 below along with dependent mesh objects that are marked with
-with red in the Object Browser.</translation>
+red in the Object Browser.</translation>
     </message>
 </context>
 <context>
@@ -8428,4 +8514,11 @@ with red in the Object Browser.</translation>
         <translation>Option value</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_GenericHypothesisCreator</name>
+    <message>
+        <source>AverageLengthForHypoSet</source>
+        <translation>Mean Size</translation>
+    </message>
+</context>
 </TS>