0022876: EDF 8425 SMESH: Get the normal of a face in the GUI

[modules/smesh.git] / src / SMESHGUI / SMESH_msg_en.ts

diff --git a/src/SMESHGUI/SMESH_msg_en.ts b/src/SMESHGUI/SMESH_msg_en.ts
index e989562ed2709af2f56e4b19746b636d2a855ed6..ca99ab64ac87933d2af511a004abd220271e27b5 100644 (file)
--- a/src/SMESHGUI/SMESH_msg_en.ts
+++ b/src/SMESHGUI/SMESH_msg_en.ts
@@ -139,6 +139,10 @@
         <source>COMPERR_NO_MESH_ON_SHAPE</source>
         <translation>No mesh elements assigned to a Sub-shape</translation>
     </message>
+    <message>
+        <source>COMPERR_BAD_PARMETERS</source>
+        <translation>Invalid input parameters</translation>
+    </message>
     <message>
         <source>EDITERR_NO_MEDIUM_ON_GEOM</source>
         <translation>Some medium nodes not placed on geometry to avoid
@@ -392,6 +396,10 @@
         <source>MEN_EDGES</source>
         <translation>Edges</translation>
     </message>
+    <message>
+        <source>MEN_CHOOSE</source>
+        <translation>Choose...</translation>
+    </message>
     <message>
         <source>MEN_EDIT</source>
         <translation>Edit</translation>
@@ -466,15 +474,15 @@
     </message>
     <message>
         <source>TOP_REORIENT_2D</source>
-        <translation>Reorient faces by vector</translation>
+        <translation>Reorient faces</translation>
     </message>
     <message>
         <source>MEN_REORIENT_2D</source>
-        <translation>Reorient faces by vector</translation>
+        <translation>Reorient faces</translation>
     </message>
     <message>
         <source>STB_REORIENT_2D</source>
-        <translation>Reorient faces by vector</translation>
+        <translation>Reorient faces</translation>
     </message>
     <message>
         <source>TOP_FIND_ELEM</source>
@@ -740,7 +748,7 @@
         <source>TOP_MEASURE_AREA</source>
         <translation>Area</translation>
     </message>
-     <message>
+    <message>
         <source>MEN_MEASURE_VOLUME</source>
         <translation>Volume</translation>
     </message>
@@ -1062,15 +1070,15 @@
     </message>
     <message>
         <source>MEN_SPLIT_TO_TETRA</source>
-        <translation>Split into Tetrahedra</translation>
+        <translation>Split Volumes</translation>
     </message>
     <message>
         <source>TOP_SPLIT_TO_TETRA</source>
-        <translation>Split into Tetrahedra</translation>
+        <translation>Split Volumes</translation>
     </message>
     <message>
         <source>STB_SPLIT_TO_TETRA</source>
-        <translation>Split into Tetrahedra</translation>
+        <translation>Split Volumes</translation>
     </message>
     <message>
         <source>MESHERS_FILE_CANT_OPEN</source>
@@ -1685,6 +1693,10 @@ Do you want to continue ?</translation>
         <source>SMESH_EXTRUSION_ALONG_VECTOR</source>
         <translation>Extrusion Along Vector</translation>
     </message>
+    <message>
+        <source>SMESH_EXTRUSION_BY_NORMAL</source>
+        <translation>Extrusion By Normal</translation>
+    </message>
     <message>
         <source>SMESH_FACE</source>
         <translation>Face</translation>
@@ -2036,6 +2048,10 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_MESHINFO_ORDER2</source>
         <translation>Quadratic</translation>
     </message>
+    <message>
+        <source>SMESH_MESHINFO_ORDER3</source>
+        <translation>Bi-Quadratic</translation>
+    </message>
     <message>
         <source>SMESH_MESHINFO_HEXAPRISM</source>
         <translation>Hexagonal prisms</translation>
@@ -2296,7 +2312,7 @@ Check algorithm documentation for supported geometry</translation>
         <source>PREF_NUMBERING_NODE</source>
         <translation>Nodes: Color</translation>
     </message>
-     <message>
+    <message>
         <source>PREF_NUMBERING_ELEM</source>
         <translation>Edges: Color</translation>
     </message>
@@ -3413,12 +3429,44 @@ Use Display Entity menu command to show them.
         <translation>Taper</translation>
     </message>
     <message>
-        <source>TB_ADD_REMOVE</source>
-        <translation>Add/Remove Toolbar</translation>
+        <source>TB_ADD</source>
+        <translation>Add Element Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_ADDNON</source>
+        <translation>Add Non Linear Element Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_REM</source>
+        <translation>Remove Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_RENUMBER</source>
+        <translation>Renumbering Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_TRANSFORM</source>
+        <translation>Transformation Toolbar</translation>
     </message>
     <message>
-        <source>TB_CTRL</source>
-        <translation>Controls Toolbar</translation>
+        <source>TB_CTRL0D</source>
+        <translation>Node Controls Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_CTRL1D</source>
+        <translation>Edge Controls Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_CTRL2D</source>
+        <translation>Face Controls Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_CTRL3D</source>
+        <translation>Volume Controls Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_MEASUREM</source>
+        <translation>Measurements Toolbar</translation>
     </message>
     <message>
         <source>TB_DISP_MODE</source>
@@ -3432,6 +3480,18 @@ Use Display Entity menu command to show them.
         <source>TB_MESH</source>
         <translation>Mesh Toolbar</translation>
     </message>
+    <message>
+        <source>TB_GROUP</source>
+        <translation>Group Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_INFO</source>
+        <translation>Information Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_ADD1D</source>
+        <translation>Mesh Toolbar</translation>
+    </message>
     <message>
         <source>TB_MODIFY</source>
         <translation>Modification Toolbar</translation>
@@ -4172,19 +4232,30 @@ It can&apos;t be deleted </translation>
         <translation>Sort child items</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_FieldSelectorWdg</name>
+    <message>
+        <source>FIELDS_TO_EXPORT</source>
+        <translation>Export Fields</translation>
+    </message>
+</context>
 <context>
     <name>SMESHGUI_Dialog</name>
     <message>
         <source>DLG_MESH</source>
-        <translation>meshes</translation>
+        <translation>mesh(s)</translation>
     </message>
     <message>
         <source>DLG_HYPO</source>
-        <translation>hypotheses</translation>
+        <translation>hypothesis(s)</translation>
     </message>
     <message>
         <source>DLG_ALGO</source>
-        <translation>algorithms</translation>
+        <translation>algorithm(s)</translation>
+    </message>
+    <message>
+        <source>DLG_GEOM</source>
+        <translation>object(s)</translation>
     </message>
 </context>
 <context>
@@ -4257,7 +4328,7 @@ Please, create VTK viewer and try again</translation>
     <message>
         <source>PREF_PRE_SELECTION</source>
         <translation>Pre-selection color</translation>
-    </message>    
+    </message>
     <message>
         <source>PREF_COLOR</source>
         <translation>Color</translation>
@@ -4302,6 +4373,10 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_FILL</source>
         <translation>Surface color</translation>
     </message>
+    <message>
+        <source>PREF_PREVIEW_COLOR</source>
+        <translation>Preview color</translation>
+    </message>
     <message>
         <source>PREF_NOTIFY_MODE</source>
         <translation>Show a computation result notification</translation>
@@ -4510,6 +4585,10 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_BALL_SIZE</source>
         <translation>Size of ball elements</translation>
     </message>
+    <message>
+        <source>PREF_BALL_SCALE</source>
+        <translation>Scale factor of ball elements</translation>
+    </message>
     <message>
         <source>PREF_WIDTH</source>
         <translation>Line width</translation>
@@ -4529,6 +4608,10 @@ Please, create VTK viewer and try again</translation>
         <source>ALLOW_ELEM_LIST_MODIF</source>
         <translation>Enable manual edition</translation>
     </message>
+    <message>
+        <source>SELECT_ALL</source>
+        <translation>Select All</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_Add0DElemsOnAllNodesDlg</name>
@@ -4786,11 +4869,11 @@ Do you want to restore original submesh priority?</translation>
         <source>RADIOBTN_2</source>
         <translation>Convert to quadratic</translation>
     </message>
-      <message>
+    <message>
         <source>RADIOBTN_3</source>
         <translation>Convert to bi-quadratic</translation>
-      </message>
-      <message>
+    </message>
+    <message>
         <source>NON_CONFORM_WARNING</source>
         <translation>Warning: mesh can become non-conformal</translation>
     </message>
@@ -5062,6 +5145,14 @@ Please select a group and try again</translation>
         <source>EXTRUSION_ALONG_LINE</source>
         <translation>Extrusion along a line</translation>
     </message>
+    <message>
+        <source>BY_AVERAGE_NORMAL</source>
+        <translation>Along average normal</translation>
+    </message>
+    <message>
+        <source>USE_INPUT_ELEMS_ONLY</source>
+        <translation>Use only input elements</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_FilterDlg</name>
@@ -5362,10 +5453,10 @@ Please check input data and try again</translation>
         <source>CONNECTED_ELEMS</source>
         <translation>Elements of a domain</translation>
     </message>
-  <message>
-    <source>NUMBEROFNODESINELEMENT</source>
-    <translation>Number Of Nodes In Element</translation>
-  </message>
+    <message>
+        <source>NUMBEROFNODESINELEMENT</source>
+        <translation>Number Of Nodes In Element</translation>
+    </message>
     <message>
         <source>COPY_FROM</source>
         <translation>Copy from...</translation>
@@ -5743,13 +5834,6 @@ Please specify them and try again</translation>
         <translation>Union of two groups</translation>
     </message>
 </context>
-<context>
-    <name>SMESHGUI_GroupDlg</name>
-    <message>
-        <source>SELECT_ALL</source>
-        <translation>Select All</translation>
-    </message>
-</context>
 <context>
     <name>SMESHGUI_UnionGroupsDlg</name>
     <message>
@@ -5925,6 +6009,10 @@ Please specify them and try again</translation>
         <source>MESH</source>
         <translation>Mesh</translation>
     </message>
+    <message>
+        <source>MESH_TYPE</source>
+        <translation>Mesh type</translation>
+    </message>
     <message>
         <source>NAME</source>
         <translation>Name</translation>
@@ -5946,8 +6034,14 @@ Please specify them and try again</translation>
         <translation>No sense in creating a submesh ignored by global algorithm &quot;%1&quot;</translation>
     </message>
     <message>
-        <source>GEOMETRY_OBJECT_IS_NOT_DEFINED</source>
-        <translation>Geometry object is not defined
+        <source>GEOMETRY_OBJECT_IS_NOT_DEFINED_MESH</source>
+        <translation>Geometry object is not defined.
+Do you want to create an empty mesh 
+without algorithms and hypotheses? </translation>
+    </message>
+    <message>
+        <source>GEOMETRY_OBJECT_IS_NOT_DEFINED_SUBMESH</source>
+        <translation>Geometry object is not defined.
 Please specify it and try again</translation>
     </message>
     <message>
@@ -5979,6 +6073,26 @@ Please specify it and try again</translation>
         <source>MESH_IS_NULL</source>
         <translation>Mesh is null</translation>
     </message>
+    <message>
+        <source>MT_ANY</source>
+        <translation>Any</translation>
+    </message>
+    <message>
+        <source>MT_HEXAHEDRAL</source>
+        <translation>Hexahedral</translation>
+    </message>
+    <message>
+        <source>MT_TETRAHEDRAL</source>
+        <translation>Tetrahedral</translation>
+    </message>
+    <message>
+        <source>MT_TRIANGULAR</source>
+        <translation>Triangular</translation>
+    </message>
+    <message>
+        <source>MT_QUADRILATERAL</source>
+        <translation>Quadrilateral</translation>
+    </message>
     <message>
         <source>NAME_OF_MESH_IS_EMPTY</source>
         <translation>Name of mesh is empty
@@ -5994,6 +6108,14 @@ Please enter valid name and try again</translation>
         <translation>There is no object for editing. Please
 select mesh or sub-mesh and try again</translation>
     </message>
+    <message>
+        <source>CONCURRENT_SUBMESH_APPEARS</source>
+        <translation> 
+The assigned algorithm has the same priority as one assigned to an 
+adjacent sub-mesh, hence it&apos;s undefined which algorithm to use for
+meshing boundary shared by two sub-meshes. Would you like to set
+the order of sub-mesh computation? </translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_MeshPatternDlg</name>
@@ -6156,6 +6278,14 @@ It is impossible to read point coordinates from file</translation>
         <source>NONE</source>
         <translation>&lt;None&gt;</translation>
     </message>
+    <message>
+        <source>DEFAULT</source>
+        <translation>&lt;Default&gt;</translation>
+    </message>
+    <message>
+        <source>SELECT</source>
+        <translation>&lt;Select&gt;</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_MultiEditDlg</name>
@@ -6201,10 +6331,10 @@ It is impossible to read point coordinates from file</translation>
     </message>
 </context>
 <context>
-    <name>SMESHGUI_CuttingIntoTetraDlg</name>
+    <name>SMESHGUI_SplitVolumesDlg</name>
     <message>
         <source>CAPTION</source>
-        <translation>Splitting volumes into tetrahedra</translation>
+        <translation>Splitting volumes</translation>
     </message>
     <message>
         <source>SPLIT_METHOD</source>
@@ -6222,6 +6352,34 @@ It is impossible to read point coordinates from file</translation>
         <source>SPLIT_HEX_TO_24_TETRA</source>
         <translation>Into 24 tetrahedra</translation>
     </message>
+    <message>
+        <source>SPLIT_HEX_TO_2_PRISMS</source>
+        <translation>Into 2 prisms</translation>
+    </message>
+    <message>
+        <source>SPLIT_HEX_TO_4_PRISMS</source>
+        <translation>Into 4 Prisms</translation>
+    </message>
+    <message>
+        <source>TARGET_ELEM_TYPE</source>
+        <translation>Target element type</translation>
+    </message>
+    <message>
+        <source>FACET_TO_SPLIT</source>
+        <translation>Facet to split</translation>
+    </message>
+    <message>
+        <source>START_POINT</source>
+        <translation>Hexa location</translation>
+    </message>
+    <message>
+        <source>FACET_NORMAL</source>
+        <translation>Facet normal</translation>
+    </message>
+    <message>
+        <source>ALL_DOMAINS</source>
+        <translation>All domains</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_PrecisionDlg</name>
@@ -6500,6 +6658,10 @@ It is impossible to read point coordinates from file</translation>
         <source>CLIP_PLANES</source>
         <translation>Clipping planes</translation>
     </message>
+    <message>
+        <source>IS_OPENGL_CLIPPING</source>
+        <translation>OpenGL clipping</translation>
+    </message>
     <message>
         <source>MESHES_SUBMESHES_GROUPS</source>
         <translation>Meshes, sub-meshes and groups</translation>
@@ -6560,6 +6722,30 @@ It is impossible to read point coordinates from file</translation>
         <source>NO_PLANES</source>
         <translation>No planes</translation>
     </message>
+    <message>
+        <source>ABSOLUTE</source>
+        <translation>Absolute</translation>
+    </message>
+    <message>
+        <source>RELATIVE</source>
+        <translation>Relative</translation>
+    </message>
+    <message>
+        <source>BASE_POINT</source>
+        <translation>Base point</translation>
+    </message>
+    <message>
+        <source>DIRECTION</source>
+        <translation>Direction</translation>
+    </message>
+    <message>
+        <source>RESET</source>
+        <translation>Reset</translation>
+    </message>
+    <message>
+        <source>INVERT</source>
+        <translation>Invert</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_DuplicateNodesDlg</name>
@@ -6587,6 +6773,10 @@ It is impossible to read point coordinates from file</translation>
         <source>DUPLICATION_ONLY_ELEMS</source>
         <translation>Duplicate elements only</translation>
     </message>
+    <message>
+        <source>DUPLICATION_GROUP_BOUNDARY</source>
+        <translation>Duplicate nodes on group boundaries</translation>
+    </message>
     <message>
         <source>GROUP_ELEMS_TO_DUPLICATE</source>
         <translation>Group of elements to duplicate</translation>
@@ -6599,6 +6789,10 @@ It is impossible to read point coordinates from file</translation>
         <source>GROUP_ELEMS_TO_REPLACE</source>
         <translation>Group of elements to replace nodes with new ones</translation>
     </message>
+    <message>
+        <source>GROUP_VOLUME_GROUPS</source>
+        <translation>Groups (faces or volumes)</translation>
+    </message>
     <message>
         <source>CONSTRUCT_NEW_GROUP_NODES</source>
         <translation>Construct group with newly created nodes</translation>
@@ -6607,6 +6801,14 @@ It is impossible to read point coordinates from file</translation>
         <source>CONSTRUCT_NEW_GROUP_ELEMENTS</source>
         <translation>Construct group with newly created elements</translation>
     </message>
+    <message>
+        <source>CREATE_JOINT_ELEMENTS</source>
+        <translation>Create joint elements</translation>
+    </message>
+    <message>
+        <source>ON_ALL_BOUNDARIES</source>
+        <translation>On all boundaries</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_Make2DFrom3DDlg</name>
@@ -6681,7 +6883,7 @@ as they are of improper type:
     </message>
     <message>
         <source>SMESH_NOT_ONLY_GROUPS</source>
-        <translation>Can't process meshes and groups at once</translation>
+        <translation>Can&apos;t process meshes and groups at once</translation>
     </message>
     <message>
         <source>SMESH_ERR_NO_3D_ELEMENTS</source>
@@ -6734,6 +6936,10 @@ as they are of improper type:
         <source>QUADRATIC_LAB</source>
         <translation>Quadratic</translation>
     </message>
+    <message>
+        <source>BI_QUADRATIC_LAB</source>
+        <translation>Bi-Quadratic</translation>
+    </message>
     <message>
         <source>0D_LAB</source>
         <translation>0D:</translation>
@@ -6896,6 +7102,10 @@ as they are of improper type:
         <source>GRAVITY_CENTER</source>
         <translation>Gravity Center</translation>
     </message>
+    <message>
+        <source>NORMAL_VECTOR</source>
+        <translation>Normal</translation>
+    </message>
     <message>
         <source>NODE</source>
         <translation>Node</translation>
@@ -7044,8 +7254,8 @@ as they are of improper type:
 <context>
     <name>SMESHGUI_TreeElemInfo</name>
     <message>
-      <source>SHOW_ITEM_INFO</source>
-      <translation>Show info</translation>
+        <source>SHOW_ITEM_INFO</source>
+        <translation>Show info</translation>
     </message>
     <message>
         <source>PROPERTY</source>
@@ -7268,7 +7478,7 @@ as they are of improper type:
     <message>
         <source>NUMBER_OF_THE_DOUBLE_FACES</source>
         <translation>Number of the double faces</translation>
-    </message>   
+    </message>
     <message>
         <source>ASPECT_RATIO_HISTOGRAM</source>
         <translation>Aspect Ratio histogram</translation>
@@ -7466,7 +7676,7 @@ as they are of improper type:
     <name>SMESHGUI_ReorientFacesDlg</name>
     <message>
         <source>CAPTION</source>
-        <translation>Reorient faces by vector</translation>
+        <translation>Reorient faces</translation>
     </message>
     <message>
         <source>REORIENT_FACES</source>
@@ -7496,6 +7706,14 @@ as they are of improper type:
         <source>ORIENTATION</source>
         <translation>Orientation</translation>
     </message>
+    <message>
+        <source>VOLUMES</source>
+        <translation>Volumes</translation>
+    </message>
+    <message>
+        <source>OUTSIDE_VOLUME_NORMAL</source>
+        <translation>Face normal outside volume</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_ReorientFacesOp</name>
@@ -7503,10 +7721,18 @@ as they are of improper type:
         <source>NO_OBJECT_SELECTED</source>
         <translation>No object selected</translation>
     </message>
+    <message>
+        <source>NO_VOLUME_OBJECT_SELECTED</source>
+        <translation>No volume object selected</translation>
+    </message>
     <message>
         <source>NO_FACES</source>
         <translation>Object includes no faces</translation>
     </message>
+    <message>
+        <source>NO_VOLUMES</source>
+        <translation>Volume object includes no volumes</translation>
+    </message>
     <message>
         <source>ZERO_SIZE_VECTOR</source>
         <translation>Zero size vector</translation>
@@ -7587,7 +7813,7 @@ as they are of improper type:
         <translation>Size:</translation>
     </message>
     <message>
-        <source>ORIENTATION_SCALE</source>
+        <source>SCALE_FACTOR</source>
         <translation>Scale:</translation>
     </message>
     <message>
@@ -7599,4 +7825,11 @@ as they are of improper type:
         <translation>Shrink coef:</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_DisplayEntitiesDlg</name>
+    <message>
+        <source>WRN_AT_LEAST_ONE</source>
+        <translation>At least one entity type should be chosen!</translation>
+    </message>
+</context>
 </TS>