23627: [IMACS] ASERIS: project point to the mesh and create a slot

[modules/smesh.git] / src / SMESHGUI / SMESH_msg_en.ts

diff --git a/src/SMESHGUI/SMESH_msg_en.ts b/src/SMESHGUI/SMESH_msg_en.ts
index 5d052e3dd296932b0c7a220c48ad1d9b49c0e717..c4ffdde6fc134127a0bab7c6dede761437e55a5d 100644 (file)
--- a/src/SMESHGUI/SMESH_msg_en.ts
+++ b/src/SMESHGUI/SMESH_msg_en.ts
@@ -11,6 +11,10 @@
         <source>MED_FILES_FILTER</source>
         <translation>MED files</translation>
     </message>
+    <message>
+        <source>SAUV_FILES_FILTER</source>
+        <translation>SAUV files</translation>
+    </message>
     <message>
         <source>IDEAS_FILES_FILTER</source>
         <translation>IDEAS files</translation>
@@ -39,6 +43,10 @@
         <source>CGNS_FILES_FILTER</source>
         <translation>CGNS files</translation>
     </message>
+    <message>
+        <source>CGNS_EXPORT_ELEMS_BY_TYPE</source>
+        <translation>Group elements by type</translation>
+    </message>
     <message>
         <source>GMF_ASCII_FILES_FILTER</source>
         <translation>GMF ASCII files</translation>
@@ -99,6 +107,10 @@
         <source>MIN_DIAG_ELEMENTS</source>
         <translation>Minimum diagonal</translation>
     </message>
+    <message>
+        <source>MIN_ELEM_EDGE</source>
+        <translation>Minimum Edge Length</translation>
+    </message>
     <message>
         <source>ASPECTRATIO_3D_ELEMENTS</source>
         <translation>Aspect Ratio 3D</translation>
@@ -220,6 +232,10 @@
         <source>LENGTH2D_EDGES</source>
         <translation>Length 2D</translation>
     </message>
+    <message>
+        <source>DEFLECTION2D_FACES</source>
+        <translation>Deflection 2D</translation>
+    </message>
     <message>
         <source>LENGTH_EDGES</source>
         <translation>Length</translation>
@@ -236,6 +252,10 @@
         <source>MAX_ELEMENT_LENGTH_3D</source>
         <translation>Element Diameter 3D</translation>
     </message>
+    <message>
+        <source>DEFLECTION_2D</source>
+        <translation>Deflection 2D</translation>
+    </message>
     <message>
         <source>MEN_ADD</source>
         <translation>Add</translation>
@@ -384,6 +404,22 @@
         <source>MEN_DEL_GROUP</source>
         <translation>Delete Groups with Contents</translation>
     </message>
+    <message>
+        <source>MEN_ADD_TO_GROUP</source>
+        <translation>Add to Group</translation>
+    </message>
+    <message>
+        <source>MEN_REMOVE_FROM_GROUP</source>
+        <translation>Remove from Group</translation>
+    </message>
+    <message>
+        <source>STB_ADD_TO_GROUP</source>
+        <translation>Add selected elements to group</translation>
+    </message>
+    <message>
+        <source>STB_REMOVE_FROM_GROUP</source>
+        <translation>Remove selected elements from group</translation>
+    </message>
     <message>
         <source>MEN_FACE_ORIENTATION</source>
         <translation>Orientation of Faces</translation>
@@ -672,6 +708,10 @@
         <source>MEN_LENGTH_2D</source>
         <translation>Length 2D</translation>
     </message>
+    <message>
+        <source>MEN_DEFLECTION_2D</source>
+        <translation>Deflection 2D</translation>
+    </message>
     <message>
         <source>MEN_MAP</source>
         <translation>Pattern Mapping</translation>
@@ -808,6 +848,18 @@
         <source>TOP_MEASURE_VOLUME</source>
         <translation>Volume</translation>
     </message>
+    <message>
+        <source>MEN_MEASURE_ANGLE</source>
+        <translation>Angle</translation>
+    </message>
+    <message>
+        <source>STB_MEASURE_ANGLE</source>
+        <translation>Measure angle defined by three nodes</translation>
+    </message>
+    <message>
+        <source>TOP_MEASURE_ANGLE</source>
+        <translation>Angle</translation>
+    </message>
     <message>
         <source>MEN_MOVE</source>
         <translation>Move Node</translation>
@@ -872,6 +924,10 @@
         <source>MEN_QUADRATIC_PENTAHEDRON</source>
         <translation>Quadratic Pentahedron</translation>
     </message>
+    <message>
+        <source>MEN_BIQUADRATIC_PENTAHEDRON</source>
+        <translation>BiQuadratic Pentahedron</translation>
+    </message>
     <message>
         <source>MEN_QUADRATIC_PYRAMID</source>
         <translation>Quadratic Pyramid</translation>
@@ -1052,6 +1108,10 @@
         <source>MEN_SCALE</source>
         <translation>Scale Transform</translation>
     </message>
+    <message>
+        <source>MEN_OFFSET</source>
+        <translation>Offset</translation>
+    </message>
     <message>
         <source>MEN_DUPLICATE_NODES</source>
         <translation>Duplicate Nodes or/and Elements</translation>
@@ -1096,6 +1156,10 @@
         <source>MEN_UNDERLYING_ELEMS</source>
         <translation>Group based on nodes of other groups</translation>
     </message>
+    <message>
+        <source>MEN_FACE_GROUPS_BY_EDGES</source>
+        <translation>Face groups separated by sharp edges</translation>
+    </message>
     <message>
         <source>MEN_UPDATE</source>
         <translation>Update</translation>
@@ -1350,6 +1414,10 @@ Please enter correct values and try again</translation>
         <source>SMESH_ADD_QUADRATIC_PENTAHEDRON_TITLE</source>
         <translation>Add Quadratic Pentahedron</translation>
     </message>
+    <message>
+        <source>SMESH_ADD_BIQUADRATIC_PENTAHEDRON_TITLE</source>
+        <translation>Add BiQuadratic Pentahedron</translation>
+    </message>
     <message>
         <source>SMESH_ADD_QUADRATIC_PYRAMID_TITLE</source>
         <translation>Add Quadratic Pyramid</translation>
@@ -1414,6 +1482,10 @@ Please enter correct values and try again</translation>
         <source>SMESH_AUTO_DIM</source>
         <translation>Automatically define space dimension</translation>
     </message>
+    <message>
+        <source>SMESH_ZTOLERANCE</source>
+        <translation>Z tolerance</translation>
+    </message>
     <message>
         <source>SMESH_REQUIRED_GROUPS</source>
         <translation>Create groups of required entities</translation>
@@ -1728,7 +1800,8 @@ so that the application may crash. Do you wish to continue visualization?</trans
     <message>
         <source>SMESH_EXPORT_FAILED</source>
         <translation>Mesh export failed.
-Probably, there is not enough space on disk.</translation>
+Probably, there is not enough space on disk, or the version of MED file used is not compatible with the mesh.
+</translation>
     </message>
     <message>
         <source>SMESH_EXPORT_MED_DUPLICATED_GRP</source>
@@ -1748,13 +1821,6 @@ Do you want to continue?</translation>
         <source>SMESH_EXPORT_ONLY_GPOUP</source>
         <translation>You are going to export the group without its mesh.
 Do you want to continue?</translation>
-    </message>
-    <message>
-        <source>SMESH_EXPORT_MED_V2_1</source>
-        <translation>During export mesh with name - &quot;%1&quot; to MED 2.1
-polygons and polyhedrons elements will be missed
-For correct export use MED 2.2
-Are you sure want to export to MED 2.1?</translation>
     </message>
     <message>
         <source>SMESH_EXPORT_MED_VERSION_COLLISION</source>
@@ -1882,7 +1948,7 @@ add the exported data to its contents?</translation>
         <translation>Hexahedrons</translation>
     </message>
     <message>
-        <source>SMESH_HILIGHT_COLOR</source>
+        <source>SMESH_HIGHLIGHT_COLOR</source>
         <translation>Highlight Color</translation>
     </message>
     <message>
@@ -1893,6 +1959,14 @@ add the exported data to its contents?</translation>
         <source>SMESH_HYPOTHESES</source>
         <translation>Hypotheses</translation>
     </message>
+    <message>
+        <source>SMESH_HYPOTHESIS</source>
+        <translation>Hypothesis</translation>
+    </message>
+    <message>
+        <source>SMESH_ALGORITHM</source>
+        <translation>Algorithm</translation>
+    </message>
     <message>
         <source>SMESH_HYP_1</source>
         <translation>Algorithm misses a hypothesis</translation>
@@ -1944,7 +2018,7 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_HYP_9</source>
-        <translation>Such dimention hypothesis is already assigned to the shape</translation>
+        <translation>Such dimension hypothesis is already assigned to the shape</translation>
     </message>
     <message>
         <source>SMESH_ID_DIAGONAL</source>
@@ -2104,7 +2178,7 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_MESHINFO_ALL_TYPES</source>
-        <translation>Heterogenous</translation>
+        <translation>Heterogeneous</translation>
     </message>
     <message>
         <source>SMESH_MESHINFO_EDGES</source>
@@ -2510,10 +2584,18 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_QUADRATIC_PENTAHEDRON</source>
         <translation>Quadratic Pentahedron</translation>
     </message>
+    <message>
+        <source>SMESH_BIQUADRATIC_PENTAHEDRON</source>
+        <translation>BiQuadratic Pentahedron</translation>
+    </message>
     <message>
         <source>SMESH_QUADRATIC_PENTAHEDRONS</source>
         <translation>Quadratic Pentahedrons</translation>
     </message>
+    <message>
+        <source>SMESH_BIQUADRATIC_PENTAHEDRONS</source>
+        <translation>BiQuadratic Pentahedrons</translation>
+    </message>
     <message>
         <source>SMESH_QUADRATIC_PYRAMID</source>
         <translation>Quadratic Pyramid</translation>
@@ -3242,6 +3324,10 @@ Use Display Entity menu command to show them.
         <source>STB_LENGTH_2D</source>
         <translation>Length 2D</translation>
     </message>
+    <message>
+        <source>STB_DEFLECTION_2D</source>
+        <translation>Deflection 2D</translation>
+    </message>
     <message>
         <source>STB_MAP</source>
         <translation>Pattern mapping</translation>
@@ -3366,6 +3452,10 @@ Use Display Entity menu command to show them.
         <source>STB_QUADRATIC_PENTAHEDRON</source>
         <translation>Quadratic Pentahedron</translation>
     </message>
+    <message>
+        <source>STB_BIQUADRATIC_PENTAHEDRON</source>
+        <translation>BiQuadratic Pentahedron</translation>
+    </message>
     <message>
         <source>STB_QUADRATIC_PYRAMID</source>
         <translation>Quadratic Pyramid</translation>
@@ -3494,6 +3584,10 @@ Use Display Entity menu command to show them.
         <source>STB_SCALE</source>
         <translation>Scale Transform</translation>
     </message>
+    <message>
+        <source>STB_OFFSET</source>
+        <translation>Offset</translation>
+    </message>
     <message>
         <source>STB_DUPLICATE_NODES</source>
         <translation>Duplicate Nodes or/and Elements</translation>
@@ -3534,6 +3628,10 @@ Use Display Entity menu command to show them.
         <source>STB_UNDERLYING_ELEMS</source>
         <translation>Create groups of entities basing on nodes of other groups</translation>
     </message>
+    <message>
+        <source>STB_FACE_GROUPS_BY_EDGES</source>
+        <translation>Create face groups separated by sharp edges</translation>
+    </message>
     <message>
         <source>STB_UPDATE</source>
         <translation>Update</translation>
@@ -3918,6 +4016,10 @@ Use Display Entity menu command to show them.
         <source>TOP_LENGTH_2D</source>
         <translation>Length 2D</translation>
     </message>
+    <message>
+        <source>TOP_DEFLECTION_2D</source>
+        <translation>Deflection 2D</translation>
+    </message>
     <message>
         <source>TOP_MAP</source>
         <translation>Pattern mapping</translation>
@@ -4042,6 +4144,10 @@ Use Display Entity menu command to show them.
         <source>TOP_QUADRATIC_PENTAHEDRON</source>
         <translation>Quadratic Pentahedron</translation>
     </message>
+    <message>
+        <source>TOP_BIQUADRATIC_PENTAHEDRON</source>
+        <translation>BiQuadratic Pentahedron</translation>
+    </message>
     <message>
         <source>TOP_QUADRATIC_PYRAMID</source>
         <translation>Quadratic Pyramid</translation>
@@ -4166,6 +4272,10 @@ Use Display Entity menu command to show them.
         <source>TOP_SCALE</source>
         <translation>Scale Transform</translation>
     </message>
+    <message>
+        <source>TOP_OFFSET</source>
+        <translation>Offset</translation>
+    </message>
     <message>
         <source>TOP_DUPLICATE_NODES</source>
         <translation>Duplicate Nodes or/and Elements</translation>
@@ -4206,6 +4316,10 @@ Use Display Entity menu command to show them.
         <source>TOP_UNDERLYING_ELEMS</source>
         <translation>Create groups of entities basing on nodes of other groups</translation>
     </message>
+    <message>
+        <source>TOP_FACE_GROUPS_BY_EDGES</source>
+        <translation>Create groups of faces separated by sharp edges</translation>
+    </message>
     <message>
         <source>TOP_UPDATE</source>
         <translation>Update</translation>
@@ -4248,7 +4362,7 @@ Use Display Entity menu command to show them.
     </message>
     <message>
         <source>MEN_FILE_INFO</source>
-        <translation>MED File Information</translation>
+        <translation>File Information</translation>
     </message>
     <message>
         <source>SMESH_WRN_NO_APPROPRIATE_SELECTION</source>
@@ -4441,6 +4555,44 @@ It can&apos;t be deleted </translation>
         <translation>Export Fields</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_FaceGroupsSeparatedByEdgesDlg</name>
+    <message>
+        <source>CAPTION</source>
+        <translation>Face groups separated by sharp edges</translation>
+    </message>
+    <message>
+        <source>SHARP_ANGLE</source>
+        <translation>Sharp angle</translation>
+    </message>
+    <message>
+        <source>CREATE_EDGES</source>
+        <translation>Create edges</translation>
+    </message>
+    <message>
+        <source>USE_EXISTING_EDGES</source>
+        <translation>Use existing edges</translation>
+    </message>
+    <message>
+        <source>NB_GROUPS_CREATED</source>
+        <translation>%1 groups of faces created</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_OffsetDlg</name>
+    <message>
+        <source>SMESH_OFFSET_TITLE</source>
+        <translation>Offset</translation>
+    </message>
+    <message>
+        <source>SMESH_OFFSET</source>
+        <translation>Offset</translation>
+    </message>
+    <message>
+        <source>OFFSET_VALUE</source>
+        <translation>Offset Value</translation>
+    </message>
+</context>
 <context>
     <name>SMESHGUI_AddMeshElementDlg</name>
     <message>
@@ -4483,6 +4635,10 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_SHOW_WARN</source>
         <translation>Show warning when exporting group</translation>
     </message>
+    <message>
+        <source>PREF_ZTOLERANCE</source>
+        <translation>Z tolerance for MED export</translation>
+    </message>
     <message>
         <source>PREF_GROUP_SEGMENT_LENGTH</source>
         <translation>Automatic parameters</translation>
@@ -4577,12 +4733,16 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>PREF_DISPLAY_MODE_GROUP</source>
-        <translation>Display mode</translation>
+        <translation>Display</translation>
     </message>
     <message>
         <source>PREF_DISPLAY_MODE</source>
         <translation>Default display mode</translation>
     </message>
+    <message>
+        <source>PREF_FITALL_ON_DISPLAYONLY</source>
+        <translation>Fit All upon Show Only</translation>
+    </message>
     <message>
         <source>PREF_ELEMENTS</source>
         <translation>Elements</translation>
@@ -4735,6 +4895,10 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_OBJECTS</source>
         <translation>Objects</translation>
     </message>
+    <message>
+        <source>PREF_SELECTION_INCREMENT</source>
+        <translation>Elements width increment</translation>
+    </message>
     <message>
         <source>PREF_OBJECT_COLOR</source>
         <translation>Object color</translation>
@@ -4879,6 +5043,10 @@ Please, create VTK viewer and try again</translation>
         <source>SMESH_ADD_QUADRATIC_PENTAHEDRON</source>
         <translation>Add Quadratic Pentahedron</translation>
     </message>
+    <message>
+        <source>SMESH_ADD_BIQUADRATIC_PENTAHEDRON</source>
+        <translation>Add BiQuadratic Pentahedron</translation>
+    </message>
     <message>
         <source>SMESH_ADD_QUADRATIC_PYRAMID</source>
         <translation>Add Quadratic Pyramid</translation>
@@ -4950,6 +5118,14 @@ Please, create VTK viewer and try again</translation>
         <source>MESHES</source>
         <translation>Meshes, sub-meshes, groups</translation>
     </message>
+    <message>
+        <source>NEW_MESH_NAME</source>
+        <translation>Create new mesh named</translation>
+    </message>
+    <message>
+        <source>MESH_APPEND_TO</source>
+        <translation>Append to mesh</translation>
+    </message>
     <message>
         <source>PROCESSING_IDENTICAL_GROUPS</source>
         <translation>Processing identical groups</translation>
@@ -4960,7 +5136,7 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>RESULT_NAME</source>
-        <translation>Result name</translation>
+        <translation>Result</translation>
     </message>
     <message>
         <source>UNITE</source>
@@ -5306,6 +5482,10 @@ Please select a group and try again</translation>
         <source>SEPARATE_CORNERS_AND_MEDIUM</source>
         <translation>No merge of corner and medium nodes of quadratic cells</translation>
     </message>
+    <message>
+        <source>AVOID_MAKING_HOLES</source>
+        <translation>Avoid making holes</translation>
+    </message>
     <message>
         <source>KEEP_NODES</source>
         <translation>Nodes to keep during the merge</translation>
@@ -5817,6 +5997,10 @@ Please enter correct value and try again</translation>
         <source>LENGTH2D</source>
         <translation>Length 2D</translation>
     </message>
+    <message>
+        <source>DEFLECTION2D</source>
+        <translation>Deflection 2D</translation>
+    </message>
     <message>
         <source>LESS_THAN</source>
         <translation>Less than</translation>
@@ -6005,18 +6189,22 @@ Please enter correct value and try again</translation>
     </message>
     <message>
         <source>ENTITY_TYPE_21</source>
-        <translation>OCTA12</translation>
+        <translation>PENTA18</translation>
     </message>
     <message>
         <source>ENTITY_TYPE_22</source>
-        <translation>POLYEDRE</translation>
+        <translation>OCTA12</translation>
     </message>
     <message>
         <source>ENTITY_TYPE_23</source>
-        <translation>QPOLYEDRE</translation>
+        <translation>POLYEDRE</translation>
     </message>
     <message>
         <source>ENTITY_TYPE_24</source>
+        <translation>QPOLYEDRE</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_25</source>
         <translation>BALL</translation>
     </message>
     <message>
@@ -6976,6 +7164,14 @@ It is impossible to read point coordinates from file</translation>
         <source>SMESH_CREATE_GROUP_FROM_GEOM</source>
         <translation>Create Groups from Geometry</translation>
     </message>
+    <message>
+        <source>ELEMENTS</source>
+        <translation>Elements</translation>
+    </message>
+    <message>
+        <source>ELEMENTS_TOOLTIP</source>
+        <translation>No 0D elements</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_MeshOrderDlg</name>
@@ -6988,7 +7184,7 @@ It is impossible to read point coordinates from file</translation>
     <name>SMESHGUI_MeshOrderOp</name>
     <message>
         <source>SMESH_NO_CONCURENT_MESH</source>
-        <translation>No concurent sub-meshes detected</translation>
+        <translation>No concurrent sub-meshes detected</translation>
     </message>
 </context>
 <context>
@@ -7148,6 +7344,10 @@ It is impossible to read point coordinates from file</translation>
         <source>ON_ALL_BOUNDARIES</source>
         <translation>On all boundaries</translation>
     </message>
+    <message>
+        <source>GENERATE_GROUPS</source>
+        <translation>Generate</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_Make2DFrom3DDlg</name>
@@ -7406,6 +7606,10 @@ as they are of improper type:
         <source>ELEM_MODE</source>
         <translation>Element</translation>
     </message>
+    <message>
+        <source>SHOW_IDS</source>
+        <translation>Show IDs</translation>
+    </message>
     <message>
         <source>BUT_DUMP_MESH</source>
         <translation>&amp;Dump</translation>
@@ -7928,6 +8132,21 @@ as they are of improper type:
         <translation>Compute</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_Angle</name>
+    <message>
+        <source>NODES_GROUP</source>
+        <translation>Three nodes</translation>
+    </message>
+    <message>
+        <source>RESULT</source>
+        <translation>Angle in degrees</translation>
+    </message>
+    <message>
+        <source>COMPUTE</source>
+        <translation>Compute</translation>
+    </message>
+</context>
 <context>
     <name>SMESHGUI_CopyMeshDlg</name>
     <message>
@@ -7942,6 +8161,29 @@ as they are of improper type:
         <source>NEW_NAME</source>
         <translation>New Mesh Name</translation>
     </message>
+    <message>
+        <source>NEW_GEOM</source>
+        <translation>New Geometry</translation>
+    </message>
+    <message>
+        <source>REUSE_HYPOTHESES</source>
+        <translation>Reuse Hypotheses</translation>
+    </message>
+    <message>
+        <source>COPY_ELEMENTS</source>
+        <translation>Copy Mesh Elements</translation>
+    </message>
+    <message>
+        <source>OPERATION_FAILED</source>
+        <translation>Not all mesh sub-objects have been copied</translation>
+    </message>
+    <message>
+        <source>SUBSHAPES_NOT_FOUND_MSG</source>
+        <translation>
+Some sub-shapes not found in the new geometry. They are listed 
+below along with dependent mesh objects that are marked with
+with red in the Object Browser.</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_MeasureDlg</name>
@@ -7961,6 +8203,10 @@ as they are of improper type:
         <source>BASIC_PROPERTIES</source>
         <translation>Basic Properties</translation>
     </message>
+    <message>
+        <source>ANGLE</source>
+        <translation>Angle</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_BoundingBox</name>