restoring fam with old id

[modules/smesh.git] / src / SMESHGUI / SMESH_msg_en.ts

diff --git a/src/SMESHGUI/SMESH_msg_en.ts b/src/SMESHGUI/SMESH_msg_en.ts
index b6f1fa6196c7094538c0844b4182dc4ea3c23e02..5c7703a8262da326a0f60cfe88a9c5f346a8fcb4 100644 (file)
--- a/src/SMESHGUI/SMESH_msg_en.ts
+++ b/src/SMESHGUI/SMESH_msg_en.ts
@@ -308,6 +308,14 @@
         <source>MEN_COMPUTE</source>
         <translation>Compute</translation>
     </message>
+    <message>
+        <source>MEN_RE_COMPUTE</source>
+        <translation>Clear + Compute</translation>
+    </message>
+    <message>
+        <source>MEN_SHOW_ERRORS</source>
+        <translation>Show Compute Errors</translation>
+    </message>
     <message>
         <source>MEN_COMPUTE_SUBMESH</source>
         <translation>Compute Sub-mesh</translation>
@@ -332,6 +340,150 @@
         <source>MEN_CONSTRUCT_GROUP</source>
         <translation>Construct Group</translation>
     </message>
+    <message>
+        <source>MEN_REF_ALL</source>
+        <translation>Uniform refinement</translation>
+    </message>
+    <message>
+        <source>MEN_REF_HOMARD</source>
+        <translation>Adaptation with HOMARD</translation>
+    </message>
+    <message>
+        <source>MEN_HOMARD_CREATE_CASE</source>
+        <translation>New case for adaptation with HOMARD</translation>
+    </message>
+    <message>
+        <source>MEN_HOMARD_FOLLOW_ITERATION</source>
+        <translation>Existing case</translation>
+    </message>
+    <message>
+        <source>MEN_HOMARD_NEW_ITERATION</source>
+        <translation>New iteration</translation>
+    </message>
+    <message>
+        <source>MEN_HOMARD_COMPUTE</source>
+        <translation>Compute</translation>
+    </message>
+    <message>
+        <source>MEN_HOMARD_COMPUTE_PUBLISH</source>
+        <translation>Compute and publish</translation>
+    </message>
+    <message>
+        <source>MEN_MG_ADAPT</source>
+        <translation>Remesh with MG_Adapt</translation>
+    </message>
+    <message>
+        <source>Args</source>
+        <translation>Arguments</translation>
+    </message>
+    <message>
+        <source>MeshOut</source>
+        <translation>Mesh Out</translation>
+    </message>
+    <message>
+        <source>MeshIn</source>
+        <translation>Mesh In</translation>
+    </message>
+    <message>
+        <source>MEDFile</source>
+        <translation>MED file</translation>
+    </message>
+    <message>
+        <source>Browser</source>
+        <translation>Browser</translation>
+    </message>
+    <message>
+        <source>Publish_MG_ADAPT</source>
+        <translation>Publish</translation>
+    </message>
+<message>
+        <source>SIZE_MAP_FIELD</source>
+        <translation>Size map field</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_FIELD_NAME</source>
+        <translation>Field Name</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_MED_FILE_1</source>
+        <translation>This MED file cannot be read.</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_MED_FILE_2</source>
+        <translation>No mesh in this MED file.</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_MED_FILE_3</source>
+        <translation>More than one mesh in this MED file.</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_MED_FILE_4</source>
+        <translation>The mesh in this MED file cannot be read.</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_MED_FILE_5</source>
+        <translation>No field in this MED file.</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_MED_FILE_6</source>
+        <translation>The field(s) in this MED file cannot be read.</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_ERROR</source>
+        <translation>Error</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_CH_ST</source>
+        <translation>Chosen time step</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_RANK</source>
+        <translation>Rank</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_TSTP</source>
+        <translation>Time step </translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_NO_T_ST</source>
+        <translation>No time step</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_L_ST</source>
+        <translation>Last time step</translation>
+    </message>
+    <message>
+        <source>MeshName</source>
+        <translation>Mesh name</translation>
+    </message>
+    <message>
+        <source>LOCAL_MG_ADAPT</source>
+        <translation>local</translation>
+    </message>
+    <message>
+        <source>BACKGRND_MG_ADAPT</source>
+        <translation>Background</translation>
+    </message>
+    <message>
+        <source>CNST_MG_ADAPT</source>
+        <translation>Constant</translation>
+    </message>
+    <message>
+        <source>MED_FILE_BCKG</source>
+        <translation>MED file background size map</translation>
+    </message>
+    <message>
+        <source>VALUE_MG_ADAPT</source>
+        <translation>Value</translation>
+    </message>
+    <message>
+        <source>SIZE_MAP_DEF</source>
+        <translation>size map definition</translation>
+    </message>
+    <message>
+        <source>ADVOP</source>
+        <translation>Advanced Options</translation>
+    </message>
     <message>
         <source>MEN_CONV_TO_QUAD</source>
         <translation>Convert to/from quadratic</translation>
@@ -780,6 +932,10 @@
         <source>MEN_MODIFY</source>
         <translation>Modification</translation>
     </message>
+    <message>
+        <source>MEN_ADAPT</source>
+        <translation>Adaptation</translation>
+    </message>
     <message>
         <source>MEN_MEASURE</source>
         <translation>Measurements</translation>
@@ -848,6 +1004,18 @@
         <source>TOP_MEASURE_VOLUME</source>
         <translation>Volume</translation>
     </message>
+    <message>
+        <source>MEN_MEASURE_ANGLE</source>
+        <translation>Angle</translation>
+    </message>
+    <message>
+        <source>STB_MEASURE_ANGLE</source>
+        <translation>Measure angle defined by three nodes</translation>
+    </message>
+    <message>
+        <source>TOP_MEASURE_ANGLE</source>
+        <translation>Angle</translation>
+    </message>
     <message>
         <source>MEN_MOVE</source>
         <translation>Move Node</translation>
@@ -1482,6 +1650,10 @@ Please enter correct values and try again</translation>
         <source>SMESH_AVAILABLE</source>
         <translation>Available</translation>
     </message>
+    <message>
+        <source>SMESH_NOT_AVAILABLE</source>
+        <translation>Not available</translation>
+    </message>
     <message>
         <source>SMESH_AVAILABLE_ALGORITHMS</source>
         <translation>Available algorithms</translation>
@@ -1835,15 +2007,15 @@ Do you want to continue?</translation>
     </message>
     <message>
         <source>SMESH_EXTRUSION_TO_DISTANCE</source>
-        <translation>Extrusion To Distance</translation>
+        <translation>Extrusion to distance</translation>
     </message>
     <message>
         <source>SMESH_EXTRUSION_ALONG_VECTOR</source>
-        <translation>Extrusion Along Vector</translation>
+        <translation>Extrusion along vector</translation>
     </message>
     <message>
         <source>SMESH_EXTRUSION_BY_NORMAL</source>
-        <translation>Extrusion By Normal</translation>
+        <translation>Extrusion by normal</translation>
     </message>
     <message>
         <source>SMESH_FACE</source>
@@ -1928,7 +2100,7 @@ add the exported data to its contents?</translation>
         <translation>Height:</translation>
     </message>
     <message>
-        <source>SMESH_HEXAS</source>
+        <source>SMESH_HEXAHEDRON</source>
         <translation>Hexahedron</translation>
     </message>
     <message>
@@ -2280,6 +2452,10 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_NAME</source>
         <translation>Name</translation>
     </message>
+    <message>
+        <source>SMESH_NAMES</source>
+        <translation>Names</translation>
+    </message>
     <message>
         <source>SMESH_NODES</source>
         <translation>Nodes</translation>
@@ -2774,7 +2950,7 @@ Check algorithm documentation for supported geometry</translation>
         <translation>Symmetry</translation>
     </message>
     <message>
-        <source>SMESH_TETRAS</source>
+        <source>SMESH_TETRAHEDRON</source>
         <translation>Tetrahedron</translation>
     </message>
     <message>
@@ -2873,6 +3049,134 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_MULTICOLOR</source>
         <translation>Multicolor</translation>
     </message>
+    <message>
+        <source>ADAPT_PREF_TAB_GENERAL</source>
+        <translation>Adaptation</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_NONE</source>
+        <translation>None</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_HOMARD_PUBLICATION</source>
+        <translation>Publication of meshes with HOMARD</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_HOMARD_PUBLICATION_MAILLAGE_IN</source>
+        <translation>IN mesh</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_HOMARD_PUBLICATION_MAILLAGE_OUT</source>
+        <translation>OUT mesh</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_HOMARD_YACS</source>
+        <translation>A YACS schema with HOMARD</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_HOMARD_YACS_MAX_ITER</source>
+        <translation>Maximal number of iterations</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_HOMARD_YACS_MAX_NODE</source>
+        <translation>Maximal number of nodes</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_HOMARD_YACS_MAX_ELEM</source>
+        <translation>Maximal number of elements</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_HOMARD_YACS_TYPE_CONVERGENCE</source>
+        <translation>Test type for a YACS schema with HOMARD</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT</source>
+        <translation>Adaptation with MG-Adapt</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_FILE_MAILLAGE_OUT</source>
+        <translation>Write the OUT mesh</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_PUBLICATION_MAILLAGE_OUT</source>
+        <translation>Publication of the OUT mesh</translation>
+    </message>
+    <message>
+        <source>OPTION_VALUE_COLUMN</source>
+        <translation>Option</translation>
+    </message>
+    <message>
+        <source>OPTION_NAME_COLUMN</source>
+        <translation>Value</translation>
+    </message>
+    <message>
+        <source>compute_ridges</source>
+        <translation>Compute ridges</translation>
+    </message>
+    <message>
+        <source>max_memory</source>
+        <translation>Maximum memory (Mb)</translation>
+    </message>
+    <message>
+        <source>Adaption</source>
+        <translation>adaptation</translation>
+    </message>
+    <message>
+        <source>components</source>
+        <translation>Components</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_SIZE_MAP</source>
+        <translation>Size map</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_SIZE_MAP_LOCAL</source>
+        <translation>Local</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_SIZE_MAP_BACKGROUND</source>
+        <translation>Background</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_MED_SIZE_MAP_BACKGROUND</source>
+        <translation>MED file background size map</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_TIME_STEP</source>
+        <translation>Time step</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_NO_TIME_STEP</source>
+        <translation>No time step</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_TIME_STEP_LAST</source>
+        <translation>Last</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_AR</source>
+        <translation>Arguments</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_ADVOP</source>
+        <translation>Advanced Options</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_TIME_LAST_STEP</source>
+        <translation>Last time step</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_TIME_C_STEP</source>
+        <translation>Chosen time step</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_TIME_STEP_C</source>
+        <translation>Value</translation>
+    </message>
+    <message>
+        <source>MG_ADAPT_SELECT_FILE_0</source>
+        <translation>MG-ADAPT select file</translation>
+    </message>
     <message>
         <source>SMESH_VISU_PROBLEM</source>
         <translation>Mesh visualization failed</translation>
@@ -3088,6 +3392,42 @@ Use Display Entity menu command to show them.
         <source>STB_CONSTRUCT_GROUP</source>
         <translation>Construct Group</translation>
     </message>
+    <message>
+        <source>STB_REF_ALL</source>
+        <translation>Uniform refinement</translation>
+    </message>
+    <message>
+        <source>STB_REF_HOMARD</source>
+        <translation>Refinement with HOMARD</translation>
+    </message>
+    <message>
+        <source>STB_HOMARD_CREATE_CASE</source>
+        <translation>Creation of a new case for adaptation with HOMARD</translation>
+    </message>
+    <message>
+        <source>STB_HOMARD_FOLLOW_ITERATION</source>
+        <translation>Creation of a new case: pursuit of a stored iteration</translation>
+    </message>
+    <message>
+        <source>STB_HOMARD_NEW_ITERATION</source>
+        <translation>Creation of a next iteration</translation>
+    </message>
+    <message>
+        <source>STB_HOMARD_COMPUTE</source>
+        <translation>Compute the refinement</translation>
+    </message>
+    <message>
+        <source>STB_HOMARD_COMPUTE_PUBLISH</source>
+        <translation>Compute the refinement and publish the final mesh</translation>
+    </message>
+    <message>
+        <source>STB_EDIT</source>
+        <translation>Edit</translation>
+    </message>
+    <message>
+        <source>STB_MG_ADAPT</source>
+        <translation>Remesh with MG_Adapt</translation>
+    </message>
     <message>
         <source>STB_CONV_TO_QUAD</source>
         <translation>Convert to/from quadratic</translation>
@@ -3617,7 +3957,7 @@ Use Display Entity menu command to show them.
         <translation>Create groups of entities basing on nodes of other groups</translation>
     </message>
     <message>
-        <source>STB_UNDERLYING_ELEMS</source>
+        <source>STB_FACE_GROUPS_BY_EDGES</source>
         <translation>Create face groups separated by sharp edges</translation>
     </message>
     <message>
@@ -3684,6 +4024,10 @@ Use Display Entity menu command to show them.
         <source>TB_CTRL3D</source>
         <translation>Volume Controls Toolbar</translation>
     </message>
+    <message>
+        <source>TB_ADAPTATION</source>
+        <translation>Adaptation Toolbar</translation>
+    </message>
     <message>
         <source>TB_MEASUREM</source>
         <translation>Measurements Toolbar</translation>
@@ -3788,6 +4132,34 @@ Use Display Entity menu command to show them.
         <source>TOP_CONSTRUCT_GROUP</source>
         <translation>Construct Group</translation>
     </message>
+    <message>
+        <source>TOP_REF_ALL</source>
+        <translation>Uniform refinement</translation>
+    </message>
+    <message>
+        <source>TOP_HOMARD_CREATE_CASE</source>
+        <translation>New case</translation>
+    </message>
+    <message>
+        <source>TOP_HOMARD_FOLLOW_ITERATION</source>
+        <translation>Existing case</translation>
+    </message>
+    <message>
+        <source>TOP_HOMARD_NEW_ITERATION</source>
+        <translation>New iteration</translation>
+    </message>
+    <message>
+        <source>TOP_HOMARD_COMPUTE</source>
+        <translation>Compute</translation>
+    </message>
+    <message>
+        <source>TOP_HOMARD_COMPUTE_PUBLISH</source>
+        <translation>Compute and publish</translation>
+    </message>
+    <message>
+        <source>TOP_MG_ADAPT</source>
+        <translation>Remesh with MG_Adapt</translation>
+    </message>
     <message>
         <source>TOP_CONV_TO_QUAD</source>
         <translation>Convert to/from quadratic</translation>
@@ -4419,8 +4791,8 @@ Use Display Entity menu command to show them.
     <message>
         <source>FULL_RECOMPUTE_QUESTION</source>
         <translation>
-The mesh has been edited since a last total re-compute 
-that may prevent successful computation. 
+The mesh has been edited since a last total re-compute
+that may prevent successful computation.
 Do you wish to re-compute the mesh totally to discard the modifications?
 </translation>
     </message>
@@ -4487,6 +4859,24 @@ It can&apos;t be deleted </translation>
         <source>STB_SORT_CHILD_ITEMS</source>
         <translation>Sort child items</translation>
     </message>
+    <message>
+        <source>MEN_BREAK_SHAPER_LINK</source>
+        <translation>Break link</translation>
+    </message>
+    <message>
+        <source>STB_BREAK_SHAPER_LINK</source>
+        <translation>Break link with Shaper model</translation>
+    </message>
+    <message>
+      <source>MSG_BREAK_SHAPER_LINK</source>
+      <translation>A link with Shaper model for object %1 will be broken.
+Continue?</translation>
+    </message>
+    <message>
+        <source>MSG_WARN_ON_GEOM_MODIF</source>
+        <translation>This action is prohibited since the geometry
+was changed and the mesh needs to be recomputed.</translation>
+    </message>
     <message>
         <source>SMESH_ADVANCED</source>
         <translation>Advanced</translation>
@@ -4535,6 +4925,10 @@ It can&apos;t be deleted </translation>
         <source>SMESH_3D_ALGO_GROUP_ADVANCED</source>
         <translation>Advanced</translation>
     </message>
+    <message>
+        <source>SMESH_HEX_PRISM</source>
+        <translation>Hexagonal Prism</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_FieldSelectorWdg</name>
@@ -4639,6 +5033,10 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_NB_SEGMENTS</source>
         <translation>Default Number of Segments</translation>
     </message>
+    <message>
+        <source>PREF_USE_MESHGEMS_HYPOSET</source>
+        <translation>Use MeshGems meshers when assigning set of hypotheses</translation>
+    </message>
     <message>
         <source>SMESH_PREF_MESH_LOADING</source>
         <translation>Mesh loading</translation>
@@ -4721,12 +5119,16 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>PREF_DISPLAY_MODE_GROUP</source>
-        <translation>Display mode</translation>
+        <translation>Display</translation>
     </message>
     <message>
         <source>PREF_DISPLAY_MODE</source>
         <translation>Default display mode</translation>
     </message>
+    <message>
+        <source>PREF_FITALL_ON_DISPLAYONLY</source>
+        <translation>Fit All upon Show Only</translation>
+    </message>
     <message>
         <source>PREF_ELEMENTS</source>
         <translation>Elements</translation>
@@ -5102,6 +5504,14 @@ Please, create VTK viewer and try again</translation>
         <source>MESHES</source>
         <translation>Meshes, sub-meshes, groups</translation>
     </message>
+    <message>
+        <source>NEW_MESH_NAME</source>
+        <translation>Create new mesh named</translation>
+    </message>
+    <message>
+        <source>MESH_APPEND_TO</source>
+        <translation>Append to mesh</translation>
+    </message>
     <message>
         <source>PROCESSING_IDENTICAL_GROUPS</source>
         <translation>Processing identical groups</translation>
@@ -5112,7 +5522,7 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>RESULT_NAME</source>
-        <translation>Result name</translation>
+        <translation>Result</translation>
     </message>
     <message>
         <source>UNITE</source>
@@ -5466,6 +5876,10 @@ Please select a group and try again</translation>
         <source>KEEP_NODES</source>
         <translation>Nodes to keep during the merge</translation>
     </message>
+    <message>
+        <source>KEEP_ELEMENTS</source>
+        <translation>Elements to keep during the merge</translation>
+    </message>
     <message>
         <source>GROUP_SUBMESH</source>
         <translation>Groups and sub-meshes</translation>
@@ -5485,18 +5899,6 @@ Please select a group and try again</translation>
         <source>CANT_GET_TANGENT</source>
         <translation>Can&apos;t get tangent for one of the path nodes</translation>
     </message>
-    <message>
-        <source>EXTRUSION_0D</source>
-        <translation>Extrusion of 0D elements</translation>
-    </message>
-    <message>
-        <source>EXTRUSION_1D</source>
-        <translation>Extrusion of 1D elements</translation>
-    </message>
-    <message>
-        <source>EXTRUSION_2D</source>
-        <translation>Extrusion of 2D elements</translation>
-    </message>
     <message>
         <source>EXTRUSION_ALONG_PATH</source>
         <translation>Extrusion along a path</translation>
@@ -5507,7 +5909,7 @@ Please select a group and try again</translation>
     </message>
     <message>
         <source>LINEAR_ANGLES</source>
-        <translation>Linear variation of the angles</translation>
+        <translation>Linear variation of angles</translation>
     </message>
     <message>
         <source>NO_ELEMENTS_SELECTED</source>
@@ -5519,11 +5921,19 @@ Please select a group and try again</translation>
     </message>
     <message>
         <source>SMESH_ANGLES</source>
-        <translation>Rotation Angles</translation>
+        <translation>Rotation angles</translation>
     </message>
     <message>
         <source>SMESH_BASE_POINT</source>
-        <translation>Base Point</translation>
+        <translation>Base point</translation>
+    </message>
+    <message>
+        <source>SMESH_SCALES</source>
+        <translation>Scale factors</translation>
+    </message>
+    <message>
+        <source>LINEAR_SCALES</source>
+        <translation>Linear variation of factors</translation>
     </message>
     <message>
         <source>SMESH_PATH</source>
@@ -5543,11 +5953,11 @@ Please select a group and try again</translation>
     </message>
     <message>
         <source>SMESH_USE_ANGLES</source>
-        <translation>Use Angles</translation>
+        <translation>Use angles</translation>
     </message>
     <message>
         <source>SMESH_USE_BASE_POINT</source>
-        <translation>Use Base Point</translation>
+        <translation>Use base point</translation>
     </message>
     <message>
         <source>WRONG_ANGLES_NUMBER</source>
@@ -5556,18 +5966,6 @@ Please select a group and try again</translation>
 </context>
 <context>
     <name>SMESHGUI_ExtrusionDlg</name>
-    <message>
-        <source>EXTRUSION_0D</source>
-        <translation>Extrusion of nodes</translation>
-    </message>
-    <message>
-        <source>EXTRUSION_1D</source>
-        <translation>Extrusion of 1D elements</translation>
-    </message>
-    <message>
-        <source>EXTRUSION_2D</source>
-        <translation>Extrusion of 2D elements</translation>
-    </message>
     <message>
         <source>EXTRUSION_ALONG_LINE</source>
         <translation>Extrusion along a line</translation>
@@ -5582,15 +5980,23 @@ Please select a group and try again</translation>
     </message>
     <message>
         <source>SMESH_SCALES</source>
-        <translation>Scale Factors</translation>
+        <translation>Scale factors</translation>
     </message>
     <message>
         <source>LINEAR_SCALES</source>
-        <translation>Linear Variation of Scale Factors</translation>
+        <translation>Linear variation of factors</translation>
     </message>
     <message>
         <source>BASE_POINT</source>
-        <translation>Scaling Center</translation>
+        <translation>Base point</translation>
+    </message>
+    <message>
+        <source>LINEAR_ANGLES</source>
+        <translation>Linear variation of angles</translation>
+    </message>
+    <message>
+        <source>SMESH_ANGLES</source>
+        <translation>Rotation angles</translation>
     </message>
 </context>
 <context>
@@ -5973,6 +6379,10 @@ Please enter correct value and try again</translation>
         <source>LENGTH2D</source>
         <translation>Length 2D</translation>
     </message>
+    <message>
+        <source>LENGTH3D</source>
+        <translation>Length 3D</translation>
+    </message>
     <message>
         <source>DEFLECTION2D</source>
         <translation>Deflection 2D</translation>
@@ -6470,7 +6880,7 @@ Please specify them and try again</translation>
     </message>
     <message>
         <source>HYPOTHESES_SETS</source>
-        <translation>Assign a set of hypotheses</translation>
+        <translation>Assign a set of automatic hypotheses</translation>
     </message>
     <message>
         <source>MESH</source>
@@ -6484,6 +6894,10 @@ Please specify them and try again</translation>
         <source>NAME</source>
         <translation>Name</translation>
     </message>
+    <message>
+        <source>CREATE_ALL_GROUPS</source>
+        <translation>Create all Groups on Geometry</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_MeshOp</name>
@@ -6503,7 +6917,7 @@ Please specify them and try again</translation>
     <message>
         <source>GEOMETRY_OBJECT_IS_NOT_DEFINED_MESH</source>
         <translation>Geometry object is not defined.
-Do you want to create an empty mesh 
+Do you want to create an empty mesh
 without algorithms and hypotheses? </translation>
     </message>
     <message>
@@ -6577,8 +6991,8 @@ select mesh or sub-mesh and try again</translation>
     </message>
     <message>
         <source>CONCURRENT_SUBMESH_APPEARS</source>
-        <translation> 
-The assigned algorithm has the same priority as one assigned to an 
+        <translation>
+The assigned algorithm has the same priority as one assigned to an
 adjacent sub-mesh, hence it&apos;s undefined which algorithm to use for
 meshing boundary shared by two sub-meshes. Would you like to set
 the order of sub-mesh computation? </translation>
@@ -7418,7 +7832,7 @@ as they are of improper type:
     </message>
 </context>
 <context>
-    <name>SMESHGUI_MeshInfo</name>
+    <name>SMESHGUI_BaseInfo</name>
     <message>
         <source>BASE_INFO</source>
         <translation>Base information</translation>
@@ -7547,6 +7961,18 @@ as they are of improper type:
         <source>OBJECT_GROUP_BALLS</source>
         <translation>Group of balls</translation>
     </message>
+    <message>
+        <source>OBJECT_GROUP_STANDALONE</source>
+        <translation>(standalone)</translation>
+    </message>
+    <message>
+        <source>OBJECT_GROUP_GEOM</source>
+        <translation>(on geometry)</translation>
+    </message>
+    <message>
+        <source>OBJECT_GROUP_FILTER</source>
+        <translation>(on filter)</translation>
+    </message>
     <message>
         <source>BUT_LOAD_MESH</source>
         <translation>Load mesh from server</translation>
@@ -7582,6 +8008,10 @@ as they are of improper type:
         <source>ELEM_MODE</source>
         <translation>Element</translation>
     </message>
+    <message>
+        <source>GROUP_MODE</source>
+        <translation>Group</translation>
+    </message>
     <message>
         <source>SHOW_IDS</source>
         <translation>Show IDs</translation>
@@ -7613,6 +8043,10 @@ as they are of improper type:
         <source>COORDINATES</source>
         <translation>Coordinates</translation>
     </message>
+    <message>
+        <source>NB_NODES</source>
+        <translation>Nb nodes</translation>
+    </message>
     <message>
         <source>CONNECTIVITY</source>
         <translation>Connectivity</translation>
@@ -7911,6 +8345,18 @@ as they are of improper type:
         <source>FILE_NAME</source>
         <translation>File name</translation>
     </message>
+    <message>
+        <source>FILE_SIZE</source>
+        <translation>Size</translation>
+    </message>
+    <message>
+        <source>FILE_VERSION</source>
+        <translation>Version</translation>
+    </message>
+    <message>
+        <source>VERSION_UNKNOWN</source>
+        <translation>Unknown</translation>
+    </message>
     <message>
         <source>STANDALONE_MESH</source>
         <translation>Standalone</translation>
@@ -8108,6 +8554,21 @@ as they are of improper type:
         <translation>Compute</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_Angle</name>
+    <message>
+        <source>NODES_GROUP</source>
+        <translation>Three nodes</translation>
+    </message>
+    <message>
+        <source>RESULT</source>
+        <translation>Angle in degrees</translation>
+    </message>
+    <message>
+        <source>COMPUTE</source>
+        <translation>Compute</translation>
+    </message>
+</context>
 <context>
     <name>SMESHGUI_CopyMeshDlg</name>
     <message>
@@ -8141,9 +8602,9 @@ as they are of improper type:
     <message>
         <source>SUBSHAPES_NOT_FOUND_MSG</source>
         <translation>
-Some sub-shapes not found in the new geometry. They are listed 
+Some sub-shapes not found in the new geometry. They are listed
 below along with dependent mesh objects that are marked with
-with red in the Object Browser.</translation>
+red in the Object Browser.</translation>
     </message>
 </context>
 <context>
@@ -8164,6 +8625,10 @@ with red in the Object Browser.</translation>
         <source>BASIC_PROPERTIES</source>
         <translation>Basic Properties</translation>
     </message>
+    <message>
+        <source>ANGLE</source>
+        <translation>Angle</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_BoundingBox</name>
@@ -8397,4 +8862,11 @@ with red in the Object Browser.</translation>
         <translation>Option value</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_GenericHypothesisCreator</name>
+    <message>
+        <source>AverageLengthForHypoSet</source>
+        <translation>Mean Size</translation>
+    </message>
+</context>
 </TS>