Issue 0020755: EDF 1279 MESH : 'Mesh to Pass Through a Point' enhancement

[modules/smesh.git] / src / SMESHGUI / SMESH_msg_en.ts

diff --git a/src/SMESHGUI/SMESH_msg_en.ts b/src/SMESHGUI/SMESH_msg_en.ts
index 1733fee64dd7c6efb02fc1fc8f7b3077392e127e..5a1866bef5016023ddd2f83bb5b2e6a90cd966b1 100644 (file)
--- a/src/SMESHGUI/SMESH_msg_en.ts
+++ b/src/SMESHGUI/SMESH_msg_en.ts
@@ -1,6 +1,6 @@
 <!DOCTYPE TS>
 <!--
-  Copyright (C) 2007-2008  CEA/DEN, EDF R&D, OPEN CASCADE
+  Copyright (C) 2007-2010  CEA/DEN, EDF R&D, OPEN CASCADE
 
   Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
   CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
@@ -181,6 +181,10 @@
             <source>MEN_PRECOMPUTE</source>
             <translation>Preview</translation>
         </message>
+        <message>
+            <source>MEN_EVALUATE</source>
+            <translation>Evaluate</translation>
+        </message>
         <message>
             <source>MEN_CONNECTION</source>
             <translation>Borders at Multi-Connection</translation>
@@ -197,6 +201,14 @@
             <source>MEN_CONV_TO_QUAD</source>
             <translation>Convert to/from quadratic</translation>
         </message>
+        <message>
+            <source>MEN_2D_FROM_3D</source>
+            <translation>Create 2D mesh from 3D</translation>
+        </message>
+        <message>
+            <source>MEN_MESH_ORDER</source>
+            <translation>Change submesh priority</translation>
+        </message>
         <message>
             <source>MEN_CREATE_GROUP</source>
             <translation>Create Group</translation>
@@ -257,6 +269,14 @@
             <source>MEN_DISP_ENT</source>
             <translation>Display Entity</translation>
         </message>
+        <message>
+            <source>MEN_ELEM0D</source>
+            <translation>0D Element</translation>
+        </message>
+        <message>
+            <source>MEN_ELEMS0D</source>
+            <translation>0D Elements</translation>
+        </message>
         <message>
             <source>MEN_EDGE</source>
             <translation>Edge</translation>
@@ -297,6 +317,10 @@
             <source>MEN_EXPORT_MED</source>
             <translation>Export to MED File</translation>
         </message>
+        <message>
+            <source>MEN_EXPORT_SAUV</source>
+            <translation>Export to SAUV (ASCII) file</translation>
+        </message>
         <message>
             <source>MEN_EXPORT_STL</source>
             <translation>Export to STL File</translation>
@@ -321,6 +345,14 @@
             <source>MEN_FILE</source>
             <translation>File</translation>
         </message>
+        <message>
+            <source>MEN_FIND_ELEM</source>
+            <translation>Find Element by Point</translation>
+        </message>
+        <message>
+            <source>TOP_FIND_ELEM</source>
+            <translation>Find Element by Point</translation>
+        </message>
         <message>
             <source>MEN_FREE_BORDER</source>
             <translation>Free Borders</translation>
@@ -381,6 +413,10 @@
             <source>MEN_MED</source>
             <translation>MED file</translation>
         </message>
+        <message>
+            <source>MEN_SAUV</source>
+            <translation>SAUV (ASCII) file</translation>
+        </message>
         <message>
             <source>MEN_MERGE</source>
             <translation>Merge Nodes</translation>
@@ -389,13 +425,14 @@
             <source>MEN_MERGE_ELEMENTS</source>
             <translation>Merge Elements</translation>
         </message>
+
         <message>
             <source>MEN_MESH</source>
             <translation>Mesh</translation>
         </message>
         <message>
             <source>MEN_MESH_THROU_POINT</source>
-            <translation>Mesh to Pass Through a Point</translation>
+            <translation>Move Node</translation>
         </message>
         <message>
             <source>MEN_MIN_ANG</source>
@@ -549,6 +586,18 @@
             <source>MEN_SHADE</source>
             <translation>Shading</translation>
         </message>
+        <message>
+            <source>MEN_QUADRATIC_REPRESENT</source>
+            <translation>2D Quadratic</translation>
+        </message>
+        <message>
+            <source>MEN_LINE_REPRESENTATION</source>
+            <translation>Lines</translation>
+        </message>
+        <message>
+            <source>MEN_ARC_REPRESENTATION</source>
+            <translation>Arcs</translation>
+        </message>
         <message>
             <source>MEN_SHOW</source>
             <translation>Show</translation>
@@ -593,6 +642,10 @@
             <source>MEN_TRANS</source>
             <translation>Translation</translation>
         </message>
+        <message>
+            <source>MEN_SCALE</source>
+            <translation>Scale Transform</translation>
+        </message>
         <message>
             <source>MEN_TRANSF</source>
             <translation>Transformation</translation>
@@ -657,6 +710,18 @@
             <source>MEN_WIRE</source>
             <translation>Wireframe</translation>
         </message>
+        <message>
+            <source>MEN_SPLIT_TO_TETRA</source>
+            <translation>Split into Tetrahedra</translation>
+        </message>
+        <message>
+            <source>TOP_SPLIT_TO_TETRA</source>
+            <translation>Split into Tetrahedra</translation>
+        </message>
+        <message>
+            <source>STB_SPLIT_TO_TETRA</source>
+            <translation>Split into Tetrahedra</translation>
+        </message>
         <message>
             <source>MESHERS_FILE_CANT_OPEN</source>
             <translation>Can not open resource file</translation>
@@ -694,6 +759,16 @@ Please, select a mesh and try again</translation>
             <source>MULTI_BORDERS</source>
             <translation>Borders at Multi-Connections</translation>
         </message>
+        <message>
+            <source>GROUP_NAME_IS_EMPTY</source>
+            <translation>Name of group is not specified.
+Please enter a name of new group to be created or choose an existing one.</translation>
+        </message>
+        <message>
+            <source>MESH_STANDALONE_GRP_CHOSEN</source>
+            <translation>Group on geometry is chosen: %1.
+Do you want to convert it to the standalone group?</translation>
+        </message>
         <message>
             <source>NODE_ID</source>
             <translation>Node ID</translation>
@@ -723,6 +798,14 @@ Please enter correct values and try again</translation>
             <source>SMESH_ADD_ALGORITHM_TITLE</source>
             <translation>Algorithms Assignation</translation>
         </message>
+        <message>
+            <source>SMESH_ADD_ELEM0D</source>
+            <translation>Add 0D Element</translation>
+        </message>
+        <message>
+            <source>SMESH_ADD_ELEM0D_TITLE</source>
+            <translation>Add 0D Element</translation>
+        </message>
         <message>
             <source>SMESH_ADD_EDGE</source>
             <translation>Add Edge</translation>
@@ -750,7 +833,7 @@ Please enter correct values and try again</translation>
         <message>
             <source>SMESH_ADD_HYP_WRN</source>
             <translation>"%1" assigned but:
-</translation>
+        </translation>
         </message>
         <message>
             <source>SMESH_ADD_POLYGON</source>
@@ -808,6 +891,10 @@ Please enter correct values and try again</translation>
             <source>SMESH_ADD_TETRAS_TITLE</source>
             <translation>Add Tetrahedron</translation>
         </message>
+        <message>
+            <source>SMESH_ADD_TO_GROUP</source>
+            <translation>Add to group</translation>
+        </message>
         <message>
             <source>SMESH_ADD_TRIANGLE</source>
             <translation>Add Triangle</translation>
@@ -904,6 +991,10 @@ Please enter correct values and try again</translation>
             <source>SMESH_BUT_OK</source>
             <translation>&amp;Ok</translation>
         </message>
+        <message>
+            <source>SMESH_BUT_OVERWRITE</source>
+            <translation>Over&amp;write</translation>
+        </message>
         <message>
             <source>SMESH_BUT_APPLY_AND_CLOSE</source>
             <translation>A&amp;pply and Close</translation>
@@ -950,6 +1041,10 @@ Please enter correct values and try again</translation>
             <source>SMESH_COMPUTE_SUCCEED</source>
             <translation>Mesh computation succeed</translation>
         </message>
+        <message>
+            <source>SMESH_EVALUATE_SUCCEED</source>
+            <translation>Mesh evaluation succeed</translation>
+        </message>
         <message>
             <source>SMESH_CONTENT</source>
             <translation>Content</translation>
@@ -1043,6 +1138,10 @@ so that the application may crash. Do you wish to continue visualization?</trans
             <source>SMESH_DZ</source>
             <translation>dZ</translation>
         </message>
+        <message>
+            <source>SMESH_ELEM0D</source>
+            <translation>0D Element</translation>
+        </message>
         <message>
             <source>SMESH_EDGE</source>
             <translation>Edge</translation>
@@ -1102,6 +1201,12 @@ Probably, there is not enough space on disk.</translation>
 You can cancel exporting and rename them,
 otherwise some group names in the resulting MED file
 will not match ones in the study.
+Do you want to continue ?</translation>
+        </message>
+        <message>
+            <source>SMESH_EXPORT_MED_DUPLICATED_MESH_NAMES</source>
+            <translation>There are some meshes with the same names in the selection.
+The result file may be incorrect.
 Do you want to continue ?</translation>
         </message>
         <message>
@@ -1110,6 +1215,19 @@ Do you want to continue ?</translation>
 polygons and polyhedrons elements will be missed
 For correct export use MED 2.2
 Are you sure want to export to MED 2.1 ?</translation>
+        </message>
+        <message>
+            <source>SMESH_EXPORT_MED_VERSION_COLLISION</source>
+            <translation>MED version of the file "%1"
+is unknown or doesn't match the selected version.
+Overwrite the file?</translation>
+        </message>
+        <message>
+            <source>SMESH_EXPORT_MED_MESH_NAMES_COLLISION</source>
+            <translation>The selected file already contains
+meshes with the following names: %1
+The result file may be incorrect.
+Overwrite the file?</translation>
         </message>
         <message>
             <source>SMESH_EXPORT_STL1</source>
@@ -1148,6 +1266,12 @@ Are you sure want to export to MED 2.1 ?</translation>
             <source>SMESH_FEATUREEDGES</source>
             <translation>Feature Edges</translation>
         </message>
+        <message>
+            <source>SMESH_FILE_EXISTS</source>
+            <translation>The file "%1" already exists.
+Do you want to overwrite it or
+add the exported data to its contents?</translation>
+        </message>
         <message>
             <source>SMESH_FONT_ARIAL</source>
             <translation>Arial</translation>
@@ -1234,7 +1358,7 @@ Are you sure want to export to MED 2.1 ?</translation>
         </message>
         <message>
             <source>SMESH_HYP_12</source>
-            <translation>Geomerty mismatches algorithm's expectation</translation>
+            <translation>Geometry mismatches algorithm's expectation\nCheck algorithm documentation for supported geometry</translation>
         </message>
         <message>
             <source>SMESH_HYP_13</source>
@@ -1372,10 +1496,38 @@ Are you sure want to export to MED 2.1 ?</translation>
             <source>SMESH_MEN_SubMeshesOnVertex</source>
             <translation>SubMeshes On Vertex</translation>
         </message>
+       <message>
+            <source>SMESH_AUTOMATIC</source>
+            <translation>Automatic</translation>
+        </message>
+       <message>
+            <source>SMESH_MANUAL</source>
+            <translation>Manual</translation>
+        </message>
         <message>
             <source>SMESH_MERGE_ELEMENTS</source>
             <translation>Merge elements</translation>
         </message>
+       <message>
+            <source>SMESH_MODE</source>
+            <translation>Mode</translation>
+        </message>
+       <message>
+            <source>SMESH_MERGED_ELEMENTS</source>
+            <translation>%1 elements successfully merged.</translation>
+        </message>
+       <message>
+            <source>SMESH_MERGED_NODES</source>
+            <translation>%1 nodes successfully merged.</translation>
+        </message>
+       <message>
+            <source>SMESH_NO_ELEMENTS_DETECTED</source>
+            <translation>There are no elements to merge.</translation>
+        </message>
+       <message>
+            <source>SMESH_NO_NODES_DETECTED</source>
+            <translation>There are no nodes to merge.</translation>
+        </message>
         <message>
             <source>SMESH_MERGE_NODES</source>
             <translation>Merge nodes</translation>
@@ -1384,6 +1536,10 @@ Are you sure want to export to MED 2.1 ?</translation>
             <source>SMESH_MESH</source>
             <translation>Mesh</translation>
         </message>
+        <message>
+            <source>SMESH_MESHINFO_0DELEMS</source>
+            <translation>0D Elements</translation>
+        </message>
         <message>
             <source>SMESH_MESHINFO_ALL_TYPES</source>
             <translation>Heterogenous</translation>
@@ -1580,6 +1736,10 @@ Are you sure want to export to MED 2.1 ?</translation>
             <source>SMESH_POINT_2</source>
             <translation>Point 2</translation>
         </message>
+        <message>
+            <source>SMESH_BASE_POINT</source>
+            <translation>Base Point</translation>
+        </message>
         <message>
             <source>SMESH_POLYEDRE_CREATE_ERROR</source>
             <translation>Polyedron creation error</translation>
@@ -1781,6 +1941,30 @@ Are you sure want to export to MED 2.1 ?</translation>
             <source>SMESH_TRANSLATION</source>
             <translation>Translation</translation>
         </message>
+        <message>
+            <source>SMESH_SCALE_TITLE</source>
+            <translation>Scale Transform</translation>
+        </message>
+        <message>
+            <source>SMESH_SCALE</source>
+            <translation>Scale</translation>
+        </message>
+        <message>
+            <source>SMESH_SCALE_FACTOR</source>
+            <translation>Scale Factor :</translation>
+        </message>
+        <message>
+            <source>SMESH_SCALE_FACTOR_X</source>
+            <translation>Scale Factor X :</translation>
+        </message>
+        <message>
+            <source>SMESH_SCALE_FACTOR_Y</source>
+            <translation>Scale Factor Y :</translation>
+        </message>
+        <message>
+            <source>SMESH_SCALE_FACTOR_Z</source>
+            <translation>Scale Factor Z :</translation>
+        </message>
         <message>
             <source>SMESH_TRANSPARENCY_OPAQUE</source>
             <translation>---> Opaque</translation>
@@ -1847,6 +2031,10 @@ Consider saving your work before application crash</translation>
             <source>SMESH_WRN_COMPUTE_FAILED</source>
             <translation>Mesh computation failed</translation>
         </message>
+        <message>
+            <source>SMESH_WRN_EVALUATE_FAILED</source>
+            <translation>Mesh evaluation failed</translation>
+        </message>
         <message>
             <source>SMESH_WRN_EMPTY_NAME</source>
             <translation>Empty name is not valid</translation>
@@ -1975,6 +2163,10 @@ Consider saving your work before application crash</translation>
             <source>STB_PRECOMPUTE</source>
             <translation>Preview</translation>
         </message>
+        <message>
+            <source>STB_EVALUATE</source>
+            <translation>Evaluate</translation>
+        </message>
         <message>
             <source>STB_CONNECTION</source>
             <translation>Borders at Multi-Connection</translation>
@@ -1991,6 +2183,14 @@ Consider saving your work before application crash</translation>
             <source>STB_CONV_TO_QUAD</source>
             <translation>Convert to/from quadratic</translation>
         </message>
+        <message>
+            <source>STB_2D_FROM_3D</source>
+            <translation>Create 2D mesh from 3D</translation>
+        </message>
+        <message>
+            <source>STB_MESH_ORDER</source>
+            <translation>Change submesh priority</translation>
+        </message>
         <message>
             <source>STB_CREATE_GROUP</source>
             <translation>Create Group</translation>
@@ -2043,6 +2243,14 @@ Consider saving your work before application crash</translation>
             <source>STB_DISP_ENT</source>
             <translation>Display entity</translation>
         </message>
+        <message>
+            <source>STB_ELEM0D</source>
+            <translation>0D Element</translation>
+        </message>
+        <message>
+            <source>STB_ELEMS0D</source>
+            <translation>0D Elements</translation>
+        </message>
         <message>
             <source>STB_EDGE</source>
             <translation>Edge</translation>
@@ -2075,6 +2283,10 @@ Consider saving your work before application crash</translation>
             <source>STB_EXPORT_MED</source>
             <translation>Export to MED file</translation>
         </message>
+        <message>
+            <source>STB_EXPORT_SAUV</source>
+            <translation>Export to SAUV (ASCII) file</translation>
+        </message>
         <message>
             <source>STB_EXPORT_STL</source>
             <translation>Export to STL file</translation>
@@ -2149,6 +2361,10 @@ Consider saving your work before application crash</translation>
             <source>STB_MED</source>
             <translation>Import MED file</translation>
         </message>
+        <message>
+            <source>STB_SAUV</source>
+            <translation>Import SAUV (ASCII) file</translation>
+        </message>
         <message>
             <source>STB_MERGE</source>
             <translation>Merge nodes</translation>
@@ -2159,7 +2375,7 @@ Consider saving your work before application crash</translation>
         </message>
         <message>
             <source>STB_MESH_THROU_POINT</source>
-            <translation>Mesh to pass through a point</translation>
+            <translation>Move Node</translation>
         </message>
         <message>
             <source>STB_MIN_ANG</source>
@@ -2325,6 +2541,10 @@ Consider saving your work before application crash</translation>
             <source>STB_TRANS</source>
             <translation>Translation</translation>
         </message>
+        <message>
+            <source>STB_SCALE</source>
+            <translation>Scale Transform</translation>
+        </message>
         <message>
             <source>STB_TRANSP</source>
             <translation>Transparency</translation>
@@ -2457,6 +2677,10 @@ Consider saving your work before application crash</translation>
             <source>TOP_PRECOMPUTE</source>
             <translation>Preview</translation>
         </message>
+        <message>
+            <source>TOP_EVALUATE</source>
+            <translation>Evaluate</translation>
+        </message>
         <message>
             <source>TOP_CONNECTION</source>
             <translation>Borders at Multi-Connection</translation>
@@ -2473,6 +2697,14 @@ Consider saving your work before application crash</translation>
             <source>TOP_CONV_TO_QUAD</source>
             <translation>Convert to/from quadratic</translation>
         </message>
+        <message>
+            <source>TOP_2D_FROM_3D</source>
+            <translation>Create 2D mesh from 3D</translation>
+        </message>
+        <message>
+            <source>TOP_MESH_ORDER</source>
+            <translation>Change submesh priority</translation>
+        </message>
         <message>
             <source>TOP_CREATE_GROUP</source>
             <translation>Create Group</translation>
@@ -2525,6 +2757,14 @@ Consider saving your work before application crash</translation>
             <source>TOP_DISP_ENT</source>
             <translation>Display entity</translation>
         </message>
+        <message>
+            <source>TOP_ELEM0D</source>
+            <translation>0D Element</translation>
+        </message>
+        <message>
+            <source>TOP_ELEMS0D</source>
+            <translation>0D Elements</translation>
+        </message>
         <message>
             <source>TOP_EDGE</source>
             <translation>Edge</translation>
@@ -2557,6 +2797,10 @@ Consider saving your work before application crash</translation>
             <source>TOP_EXPORT_MED</source>
             <translation>Export to MED file</translation>
         </message>
+        <message>
+            <source>TOP_EXPORT_SAUV</source>
+            <translation>Export to SAUV (ASCII) file</translation>
+        </message>
         <message>
             <source>TOP_EXPORT_STL</source>
             <translation>Export to STL file</translation>
@@ -2631,6 +2875,10 @@ Consider saving your work before application crash</translation>
             <source>TOP_MED</source>
             <translation>Import MED file</translation>
         </message>
+        <message>
+            <source>TOP_SAUV</source>
+            <translation>Import SAUV (ASCII) file</translation>
+        </message>
         <message>
             <source>TOP_MERGE</source>
             <translation>Merge nodes</translation>
@@ -2641,7 +2889,7 @@ Consider saving your work before application crash</translation>
         </message>
         <message>
             <source>TOP_MESH_THROU_POINT</source>
-            <translation>Mesh to pass through a point</translation>
+            <translation>Move Node</translation>
         </message>
         <message>
             <source>TOP_MIN_ANG</source>
@@ -2807,6 +3055,10 @@ Consider saving your work before application crash</translation>
             <source>TOP_TRANS</source>
             <translation>Translation</translation>
         </message>
+        <message>
+            <source>TOP_SCALE</source>
+            <translation>Scale Transform</translation>
+        </message>
         <message>
             <source>TOP_TRANSP</source>
             <translation>Transparency</translation>
@@ -2915,6 +3167,48 @@ Consider saving your work before application crash</translation>
             <source>NO_MESH_SELECTED</source>
             <translation>No mesh selected</translation>
         </message>
+        <message>
+            <source>SMESH_PREF_def_precision</source>
+            <translation>Default precision</translation>
+        </message>
+        <message>
+            <source>SMESH_PREF_length_precision</source>
+            <translation>Length precision</translation>
+        </message>
+        <message>
+            <source>SMESH_PREF_angle_precision</source>
+            <translation>Angular precision</translation>
+        </message>
+        <message>
+            <source>SMESH_PREF_len_tol_precision</source>
+            <translation>Length tolerance precision</translation>
+        </message>
+        <message>
+            <source>SMESH_PREF_parametric_precision</source>
+            <translation>Parametric precision</translation>
+        </message>
+        <message>
+            <source>SMESH_PREF_area_precision</source>
+            <translation>Area precision</translation>
+        </message>
+        <message>
+            <source>FULL_RECOMPUTE_QUESTION</source>
+            <translation>
+The mesh has been edited since a last total re-compute 
+that may prevent successful computation. 
+Do you wish to re-compute the mesh totally to discard the modifications?
+            </translation>
+        </message>
+        <message>
+            <source>SMESH_PREF_vol_precision</source>
+            <translation>Volume precision</translation>
+        </message>
+        <message>
+            <source>SMESH_PRECISION_HINT</source>
+            <translation>
+Input value precision can be adjusted using
+'%1' parameter in Mesh module preferences.</translation>
+        </message>
     </context>
     <context>
         <name>SMESHGUI</name>
@@ -2968,6 +3262,14 @@ Please, create VTK viewer and try again</translation>
             <translation>Display entity</translation>
         </message>
         <message>
+            <source>QUADRATIC_REPRESENT_MODE</source>
+            <translation>Representation of the 2D quadratic elements</translation>
+        </message>
+        <message>
+            <source>MAX_ARC_ANGLE</source>
+            <translation>Maximum angle</translation>
+        </message>
+       <message>
             <source>PREF_DISPLAY_MODE</source>
             <translation>Display mode</translation>
         </message>
@@ -2987,6 +3289,10 @@ Please, create VTK viewer and try again</translation>
             <source>PREF_NOTIFY_MODE</source>
             <translation>Show a computation result notification</translation>
         </message>
+        <message>
+            <source>SMESH_PREF_GROUP_PRECISION</source>
+            <translation>Input fields precision</translation>
+        </message>
         <message>
             <source>PREF_GROUP_ELEMENTS</source>
             <translation>Elements</translation>
@@ -3035,6 +3341,10 @@ Please, create VTK viewer and try again</translation>
             <source>PREF_LABELS_COLOR</source>
             <translation>Labels color</translation>
         </message>
+        <message>
+            <source>PREF_MARKER_SCALE</source>
+            <translation>Scale of marker</translation>
+        </message>
         <message>
             <source>PREF_NODES</source>
             <translation>Nodes</translation>
@@ -3067,10 +3377,6 @@ Please, create VTK viewer and try again</translation>
             <source>PREF_SHRINK_COEFF</source>
             <translation>Shrink coef.</translation>
         </message>
-        <message>
-            <source>PREF_SIZE</source>
-            <translation>Size</translation>
-        </message>
         <message>
             <source>PREF_TAB_GENERAL</source>
             <translation>General</translation>
@@ -3087,6 +3393,18 @@ Please, create VTK viewer and try again</translation>
             <source>PREF_TITLE_COLOR</source>
             <translation>Title color</translation>
         </message>
+        <message>
+            <source>PREF_TYPE_OF_MARKER</source>
+            <translation>Type of marker</translation>
+        </message>
+        <message>
+            <source>PREF_COLOR_0D</source>
+            <translation>0D elements</translation>
+        </message>
+        <message>
+            <source>PREF_SIZE_0D</source>
+            <translation>Size of 0D elements</translation>
+        </message>
         <message>
             <source>PREF_WIDTH</source>
             <translation>Width</translation>
@@ -3195,6 +3513,10 @@ Please, create VTK viewer and try again</translation>
             <source>CONSTRUCTOR</source>
             <translation>Compute mesh</translation>
         </message>
+        <message>
+            <source>EVAL_DLG</source>
+            <translation>Evaluate mesh</translation>
+        </message>
         <message>
             <source>ERRORS</source>
             <translation>Errors</translation>
@@ -3247,6 +3569,15 @@ Please, create VTK viewer and try again</translation>
  created during preview operation.
  Do you want to remove all this submeshes?</translation>
         </message>
+        <message>
+            <source>SMESH_WRN_NOTHING_PREVIEW</source>
+            <translation>No mesh preview is available</translation>
+        </message>
+        <message>
+            <source>SMESH_REJECT_MESH_ORDER</source>
+            <translation>The submesh priority changed during preview operation.
+Do you want to restore original submesh priority?</translation>
+        </message>
     </context>
     <context>
         <name>SMESHGUI_ConvToQuadDlg</name>
@@ -3283,6 +3614,13 @@ Please specify it and try again</translation>
             <translation>No valid mesh object selected</translation>
         </message>
     </context>
+    <context>
+        <name>SMESHGUI_Make2DFrom3DDlg</name>
+        <message>
+            <source>CAPTION</source>
+            <translation>Create 2D mesh from 3D</translation>
+        </message>
+    </context>
     <context>
         <name>SMESHGUI_CreatePatternDlg</name>
         <message>
@@ -3477,7 +3815,7 @@ Please select a groups and try again</translation>
         </message>
         <message>
             <source>SMESH_PATH_MESH</source>
-            <translation>Mesh</translation>
+            <translation>Mesh or submesh</translation>
         </message>
         <message>
             <source>SMESH_PATH_SHAPE</source>
@@ -4087,28 +4425,24 @@ Please specify them and try again</translation>
         <name>SMESHGUI_MakeNodeAtPointDlg</name>
         <message>
             <source>AUTO_SEARCH</source>
-            <translation>Automatic search</translation>
+            <translation>Find closest to destination</translation>
         </message>
         <message>
             <source>CAPTION</source>
-            <translation>Mesh to pass through a point</translation>
+            <translation>Move node</translation>
         </message>
         <message>
-            <source>CREATE_NEW_METHOD</source>
-            <translation>Create a node</translation>
+            <source>DESTINATION</source>
+            <translation>Destination</translation>
         </message>
         <message>
-            <source>MESH_PASS_THROUGH_POINT</source>
-            <translation>Make a node at point</translation>
+            <source>MOVE_NODE</source>
+            <translation>Move node</translation>
         </message>
         <message>
             <source>METHOD</source>
             <translation>Method</translation>
         </message>
-        <message>
-            <source>MOVE_EXISTING_METHOD</source>
-            <translation>Move a node</translation>
-        </message>
         <message>
             <source>NODE_2MOVE</source>
             <translation>Node to move</translation>
@@ -4129,6 +4463,37 @@ Please specify them and try again</translation>
             <translation>Mesh to modify not selected</translation>
         </message>
     </context>
+    <context>
+        <name>SMESHGUI_FindElemByPointDlg</name>
+        <message>
+            <source>CAPTION</source>
+            <translation>Find Element by Point</translation>
+        </message>
+        <message>
+            <source>CREATE_NEW_METHOD</source>
+            <translation>Create a node</translation>
+        </message>
+        <message>
+            <source>MESH_PASS_THROUGH_POINT</source>
+            <translation>Make a node at point</translation>
+        </message>
+        <message>
+            <source>METHOD</source>
+            <translation>Method</translation>
+        </message>
+        <message>
+            <source>MOVE_EXISTING_METHOD</source>
+            <translation>Move a node</translation>
+        </message>
+        <message>
+            <source>NODE_2MOVE</source>
+            <translation>Node to move</translation>
+        </message>
+        <message>
+            <source>NODE_2MOVE_ID</source>
+            <translation>ID</translation>
+        </message>
+    </context>
     <context>
         <name>SMESHGUI_MeshDlg</name>
         <message>
@@ -4403,17 +4768,6 @@ It is impossible to read point coordinates from file</translation>
             <translation>&lt;None></translation>
         </message>
     </context>
-    <context>
-        <name>SMESHGUI_MoveNodesDlg</name>
-        <message>
-            <source>CAPTION</source>
-            <translation>Move node</translation>
-        </message>
-        <message>
-            <source>NODE_ID_IS_NOT_DEFINED</source>
-            <translation>Node ID is not defined</translation>
-        </message>
-    </context>
     <context>
         <name>SMESHGUI_MultiEditDlg</name>
         <message>
@@ -4457,6 +4811,25 @@ It is impossible to read point coordinates from file</translation>
             <translation>Use numeric functor</translation>
         </message>
     </context>
+    <context>
+        <name>SMESHGUI_CuttingIntoTetraDlg</name>
+        <message>
+            <source>CAPTION</source>
+            <translation>Splitting volumes into tetrahedra</translation>
+        </message>
+        <message>
+            <source>SPLIT_METHOD</source>
+            <translation>Split hexahedron</translation>
+        </message>
+        <message>
+            <source>SPLIT_HEX_TO_5_TETRA</source>
+            <translation>Into 5 tetrahedra</translation>
+        </message>
+        <message>
+            <source>SPLIT_HEX_TO_6_TETRA</source>
+            <translation>Into 6 tetrahedra</translation>
+        </message>
+    </context>
     <context>
         <name>SMESHGUI_PrecisionDlg</name>
         <message>
@@ -4577,6 +4950,7 @@ It is impossible to read point coordinates from file</translation>
             <source>MERGE_EQUAL_ELEMENTS</source>
             <translation>Merge equal elements</translation>
         </message>
+
         <message>
             <source>NODE1_TO_MERGE</source>
             <translation>Node 1 To Merge</translation>
@@ -4698,6 +5072,10 @@ It is impossible to read point coordinates from file</translation>
             <source>GRAVITY_CENTER</source>
             <translation>Gravity center</translation>
         </message>
+       <message>
+            <source>CONNECTED_ELEMENTS</source>
+            <translation>Connected With Elements</translation>
+        </message>
     </context>
     <context>
         <name>SMESHGUI_FileInfoDlg</name>
@@ -4718,4 +5096,84 @@ It is impossible to read point coordinates from file</translation>
             <translation>MED version</translation>
         </message>
     </context>
+    <context>
+        <name>SMESHGUI_GroupOnShapeDlg</name>
+        <message>
+            <source>SMESH_CREATE_GROUP_FROM_GEOM</source>
+            <translation>Create Groups from Geometry</translation>
+        </message>
+    </context>
+    <context>
+        <name>SMESHGUI_MeshOrderDlg</name>
+        <message>
+            <source>SMESH_MESHORDER_TITLE</source>
+            <translation>Order of submesh in meshing process</translation>
+        </message>
+    </context>
+    <context>
+        <name>SMESHGUI_MeshOrderOp</name>
+        <message>
+            <source>SMESH_NO_CONCURENT_MESH</source>
+            <translation>No concurent submeshes detected</translation>
+        </message>
+    </context>
+    <context>
+        <name>SMESHGUI_ClippingDlg</name>
+       <message>
+            <source>CLIP_PLANES</source>
+            <translation>Clipping planes</translation>
+        </message>
+        <message>
+            <source>ROTATION_AROUND_X_Y2Z</source>
+            <translation>Rotation around X (Y to Z):</translation>
+        </message>
+        <message>
+            <source>ROTATION_AROUND_Y_X2Z</source>
+            <translation>Rotation around Y (X to Z):</translation>
+        </message>
+        <message>
+            <source>ROTATION_AROUND_Z_Y2X</source>
+            <translation>Rotation around Z (Y to X):</translation>
+        </message>
+        <message>
+            <source>ROTATION_AROUND_X_Z2Y</source>
+            <translation>Rotation around X (Z to Y):</translation>
+        </message>
+        <message>
+            <source>ROTATION_AROUND_Y_Z2X</source>
+            <translation>Rotation around Y (Z to X):</translation>
+        </message>
+        <message>
+            <source>ROTATION_AROUND_Z_X2Y</source>
+            <translation>Rotation around Z (X to Y):</translation>
+        </message>
+        <message>
+            <source>SHOW_PREVIEW</source>
+            <translation>Show preview</translation>
+        </message>
+        <message>
+            <source>AUTO_APPLY</source>
+            <translation>Auto Apply</translation>
+        </message>
+        <message>
+            <source>ALONG_XY</source>
+            <translation>|| X-Y</translation>
+        </message>
+        <message>
+            <source>ALONG_YZ</source>
+            <translation>|| Y-Z</translation>
+        </message>
+        <message>
+            <source>ALONG_ZX</source>
+            <translation>|| Z-X</translation>
+        </message>
+        <message>
+            <source>PLANE_NUM</source>
+            <translation>Plane# %1</translation>
+        </message>
+        <message>
+            <source>NO_PLANES</source>
+            <translation>No planes</translation>
+        </message>
+    </context>
 </TS>