23080: [CEA 1497] Do not merge a middle node in quadratic with the extreme nodes...

[modules/smesh.git] / src / SMESHGUI / SMESH_msg_en.ts

diff --git a/src/SMESHGUI/SMESH_msg_en.ts b/src/SMESHGUI/SMESH_msg_en.ts
index a33acb1783a7de299ceb7726dab648f9a2ef8f0f..45fef3733593638fdce486d31c4b204c347cfe4c 100644 (file)
--- a/src/SMESHGUI/SMESH_msg_en.ts
+++ b/src/SMESHGUI/SMESH_msg_en.ts
@@ -286,7 +286,7 @@
     </message>
     <message>
         <source>MEN_MESH_ORDER</source>
     </message>
     <message>
         <source>MEN_MESH_ORDER</source>

-        <translation>Change submesh priority</translation>
+        <translation>Change sub-mesh priority</translation>

     </message>
     <message>
         <source>MEN_CREATE_GROUP</source>
     </message>
     <message>
         <source>MEN_CREATE_GROUP</source>


@@ -792,6 +792,10 @@
         <source>MEN_POLYGON</source>
         <translation>Polygon</translation>
     </message>
         <source>MEN_POLYGON</source>
         <translation>Polygon</translation>
     </message>

+    <message>
+        <source>MEN_QUADRATIC_POLYGON</source>
+        <translation>Quadratic Polygon</translation>
+    </message>

     <message>
         <source>MEN_POLYHEDRON</source>
         <translation>Polyhedron</translation>
     <message>
         <source>MEN_POLYHEDRON</source>
         <translation>Polyhedron</translation>


@@ -932,6 +936,10 @@
         <source>MEN_SHADE</source>
         <translation>Shading</translation>
     </message>
         <source>MEN_SHADE</source>
         <translation>Shading</translation>
     </message>

+    <message>
+        <source>MEN_SHOW_SCALAR_BAR</source>
+        <translation>Show Scalar Bar</translation>
+    </message>

     <message>
         <source>MEN_QUADRATIC_REPRESENT</source>
         <translation>2D Quadratic</translation>
     <message>
         <source>MEN_QUADRATIC_REPRESENT</source>
         <translation>2D Quadratic</translation>


@@ -1123,8 +1131,13 @@ Please, select a mesh and try again</translation>
 Please enter a name of new group to be created or choose an existing one.</translation>
     </message>
     <message>
 Please enter a name of new group to be created or choose an existing one.</translation>
     </message>
     <message>

-        <source>MESH_STANDALONE_GRP_CHOSEN</source>
+        <source>MESH_GEOM_GRP_CHOSEN</source>

         <translation>Group on geometry is chosen: %1.
         <translation>Group on geometry is chosen: %1.

+Do you want to convert it to the standalone group?</translation>
+    </message>
+    <message>
+        <source>MESH_FILTER_GRP_CHOSEN</source>
+        <translation>Group on filter is chosen: %1.

 Do you want to convert it to the standalone group?</translation>
     </message>
     <message>
 Do you want to convert it to the standalone group?</translation>
     </message>
     <message>


@@ -1221,6 +1234,14 @@ Please enter correct values and try again</translation>
         <source>SMESH_ADD_POLYGON_TITLE</source>
         <translation>Add Polygon</translation>
     </message>
         <source>SMESH_ADD_POLYGON_TITLE</source>
         <translation>Add Polygon</translation>
     </message>

+    <message>
+        <source>SMESH_ADD_QUADRATIC_POLYGON</source>
+        <translation>Add Quadratic polygon</translation>
+    </message>
+    <message>
+        <source>SMESH_ADD_QUADRATIC_POLYGON_TITLE</source>
+        <translation>Add Quadratic Polygon</translation>
+    </message>

     <message>
         <source>SMESH_ADD_PENTA</source>
         <translation>Add pentahedron</translation>
     <message>
         <source>SMESH_ADD_PENTA</source>
         <translation>Add pentahedron</translation>


@@ -1287,7 +1308,7 @@ Please enter correct values and try again</translation>
     </message>
     <message>
         <source>SMESH_ADD_SUBMESH</source>
     </message>
     <message>
         <source>SMESH_ADD_SUBMESH</source>

-        <translation>SubMesh Construction</translation>
+        <translation>Sub-mesh Construction</translation>

     </message>
     <message>
         <source>SMESH_ADD_TETRAS</source>
     </message>
     <message>
         <source>SMESH_ADD_TETRAS</source>


@@ -1805,7 +1826,7 @@ add the exported data to its contents?</translation>
     </message>
     <message>
         <source>SMESH_HYP_10</source>
     </message>
     <message>
         <source>SMESH_HYP_10</source>

-        <translation>Hypothesis and submesh dimensions mismatch</translation>
+        <translation>Hypothesis and sub-mesh dimensions mismatch</translation>

     </message>
     <message>
         <source>SMESH_HYP_11</source>
     </message>
     <message>
         <source>SMESH_HYP_11</source>


@@ -1830,7 +1851,7 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_HYP_4</source>
     </message>
     <message>
         <source>SMESH_HYP_4</source>

-        <translation>Submesh is ignored as there is another algorithm of upper dimension generating %1D elements</translation>
+        <translation>Sub-mesh is ignored as there is another algorithm of upper dimension generating %1D elements</translation>

     </message>
     <message>
         <source>SMESH_HYP_5</source>
     </message>
     <message>
         <source>SMESH_HYP_5</source>


@@ -1853,20 +1874,20 @@ Check algorithm documentation for supported geometry</translation>
         <translation>Such dimention hypothesis is already assigned to the shape</translation>
     </message>
     <message>
         <translation>Such dimention hypothesis is already assigned to the shape</translation>
     </message>
     <message>

-        <source>SMESH_ID_DIAGONAL</source>
-        <translation>Id Edges</translation>
+        <source>SMESH_ID_EDGES</source>
+        <translation>Edge IDs</translation>

     </message>
     <message>
         <source>SMESH_ID_ELEMENTS</source>
     </message>
     <message>
         <source>SMESH_ID_ELEMENTS</source>

-        <translation>Id Elements</translation>
+        <translation>Element IDs</translation>

     </message>
     <message>
         <source>SMESH_ID_FACES</source>
     </message>
     <message>
         <source>SMESH_ID_FACES</source>

-        <translation>Id Faces</translation>
+        <translation>Face IDs</translation>

     </message>
     <message>
         <source>SMESH_ID_NODES</source>
     </message>
     <message>
         <source>SMESH_ID_NODES</source>

-        <translation>Id Nodes</translation>
+        <translation>Node IDs</translation>

     </message>
     <message>
         <source>SMESH_INCORRECT_INPUT</source>
     </message>
     <message>
         <source>SMESH_INCORRECT_INPUT</source>


@@ -1938,23 +1959,23 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnCompound</source>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnCompound</source>

-        <translation>SubMeshes On Compound</translation>
+        <translation>Sub-meshes On Compound</translation>

     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnEdge</source>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnEdge</source>

-        <translation>SubMeshes On Edge</translation>
+        <translation>Sub-meshes On Edge</translation>

     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnFace</source>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnFace</source>

-        <translation>SubMeshes On Face</translation>
+        <translation>Sub-meshes On Face</translation>

     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnSolid</source>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnSolid</source>

-        <translation>SubMeshes On Solid</translation>
+        <translation>Sub-meshes On Solid</translation>

     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnVertex</source>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnVertex</source>

-        <translation>SubMeshes On Vertex</translation>
+        <translation>Sub-meshes On Vertex</translation>

     </message>
     <message>
         <source>SMESH_AUTOMATIC</source>
     </message>
     <message>
         <source>SMESH_AUTOMATIC</source>


@@ -2168,9 +2189,13 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_OBJECT_MESH</source>
         <translation>Mesh</translation>
     </message>
         <source>SMESH_OBJECT_MESH</source>
         <translation>Mesh</translation>
     </message>

+    <message>
+        <source>SMESH_OBJECTS</source>
+        <translation>Objects</translation>
+    </message>

     <message>
         <source>SMESH_OBJECT_MESHorSUBMESH</source>
     <message>
         <source>SMESH_OBJECT_MESHorSUBMESH</source>

-        <translation>Mesh or SubMesh</translation>
+        <translation>Mesh or Sub-mesh</translation>

     </message>
     <message>
         <source>SMESH_OPERATION_FAILED</source>
     </message>
     <message>
         <source>SMESH_OPERATION_FAILED</source>


@@ -2314,7 +2339,7 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>PREF_NUMBERING_ELEM</source>
     </message>
     <message>
         <source>PREF_NUMBERING_ELEM</source>

-        <translation>Edges: Color</translation>
+        <translation>Elements: Color</translation>

     </message>
     <message>
         <source>PREF_NUMBERING_FONT</source>
     </message>
     <message>
         <source>PREF_NUMBERING_FONT</source>


@@ -2577,6 +2602,10 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_SEWING</source>
         <translation>Sewing</translation>
     </message>
         <source>SMESH_SEWING</source>
         <translation>Sewing</translation>
     </message>

+    <message>
+        <source>SMESH_SHOW_SCALAR_BAR</source>
+        <translation>Show Scalar Bar</translation>
+    </message>

     <message>
         <source>SMESH_SMOOTHING</source>
         <translation>Smoothing</translation>
     <message>
         <source>SMESH_SMOOTHING</source>
         <translation>Smoothing</translation>


@@ -2587,11 +2616,11 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_SUBMESH</source>
     </message>
     <message>
         <source>SMESH_SUBMESH</source>

-        <translation>SubMesh</translation>
+        <translation>Sub-mesh</translation>

     </message>
     <message>
         <source>SMESH_SUBMESH_SELECTED</source>
     </message>
     <message>
         <source>SMESH_SUBMESH_SELECTED</source>

-        <translation>%1 SubMeshes</translation>
+        <translation>%1 Sub-meshes</translation>

     </message>
     <message>
         <source>SMESH_SYMMETRY</source>
     </message>
     <message>
         <source>SMESH_SYMMETRY</source>


@@ -2914,7 +2943,7 @@ Use Display Entity menu command to show them.
     </message>
     <message>
         <source>STB_MESH_ORDER</source>
     </message>
     <message>
         <source>STB_MESH_ORDER</source>

-        <translation>Change submesh priority</translation>
+        <translation>Change sub-mesh priority</translation>

     </message>
     <message>
         <source>STB_CREATE_GROUP</source>
     </message>
     <message>
         <source>STB_CREATE_GROUP</source>


@@ -3212,6 +3241,10 @@ Use Display Entity menu command to show them.
         <source>STB_POLYGON</source>
         <translation>Polygon</translation>
     </message>
         <source>STB_POLYGON</source>
         <translation>Polygon</translation>
     </message>

+    <message>
+        <source>STB_QUADRATIC_POLYGON</source>
+        <translation>Quadratic Polygon</translation>
+    </message>

     <message>
         <source>STB_POLYHEDRON</source>
         <translation>Polyhedron</translation>
     <message>
         <source>STB_POLYHEDRON</source>
         <translation>Polyhedron</translation>


@@ -3324,6 +3357,10 @@ Use Display Entity menu command to show them.
         <source>STB_SHOW</source>
         <translation>Show</translation>
     </message>
         <source>STB_SHOW</source>
         <translation>Show</translation>
     </message>

+    <message>
+        <source>STB_SHOW_SCALAR_BAR</source>
+        <translation>Show Scalar Bar</translation>
+    </message>

     <message>
         <source>STB_SHRINK</source>
         <translation>Shrink</translation>
     <message>
         <source>STB_SHRINK</source>
         <translation>Shrink</translation>


@@ -3574,7 +3611,7 @@ Use Display Entity menu command to show them.
     </message>
     <message>
         <source>TOP_MESH_ORDER</source>
     </message>
     <message>
         <source>TOP_MESH_ORDER</source>

-        <translation>Change submesh priority</translation>
+        <translation>Change sub-mesh priority</translation>

     </message>
     <message>
         <source>TOP_CREATE_GROUP</source>
     </message>
     <message>
         <source>TOP_CREATE_GROUP</source>


@@ -3864,6 +3901,10 @@ Use Display Entity menu command to show them.
         <source>TOP_POLYGON</source>
         <translation>Polygon</translation>
     </message>
         <source>TOP_POLYGON</source>
         <translation>Polygon</translation>
     </message>

+    <message>
+        <source>TOP_QUADRATIC_POLYGON</source>
+        <translation>Quadratic Polygon</translation>
+    </message>

     <message>
         <source>TOP_POLYHEDRON</source>
         <translation>Polyhedron</translation>
     <message>
         <source>TOP_POLYHEDRON</source>
         <translation>Polyhedron</translation>


@@ -4350,17 +4391,25 @@ Please, create VTK viewer and try again</translation>
         <translation>Display entity</translation>
     </message>
     <message>
         <translation>Display entity</translation>
     </message>
     <message>

-        <source>QUADRATIC_REPRESENT_MODE</source>
+        <source>QUADRATIC_REPRESENT_MODE_GROUP</source>

         <translation>Representation of the 2D quadratic elements</translation>
     </message>
         <translation>Representation of the 2D quadratic elements</translation>
     </message>

+    <message>
+        <source>QUADRATIC_REPRESENT_MODE</source>
+        <translation>Default mode of the 2D quadratic elements</translation>
+    </message>

     <message>
         <source>MAX_ARC_ANGLE</source>
         <translation>Maximum angle</translation>
     </message>
     <message>
     <message>
         <source>MAX_ARC_ANGLE</source>
         <translation>Maximum angle</translation>
     </message>
     <message>

-        <source>PREF_DISPLAY_MODE</source>
+        <source>PREF_DISPLAY_MODE_GROUP</source>

         <translation>Display mode</translation>
     </message>
         <translation>Display mode</translation>
     </message>

+    <message>
+        <source>PREF_DISPLAY_MODE</source>
+        <translation>Default display mode</translation>
+    </message>

     <message>
         <source>PREF_ELEMENTS</source>
         <translation>Elements</translation>
     <message>
         <source>PREF_ELEMENTS</source>
         <translation>Elements</translation>


@@ -4571,7 +4620,7 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>PREF_COLOR_0D</source>
     </message>
     <message>
         <source>PREF_COLOR_0D</source>

-        <translation>0D elements</translation>
+        <translation>0D element color</translation>

     </message>
     <message>
         <source>PREF_SIZE_0D</source>
     </message>
     <message>
         <source>PREF_SIZE_0D</source>


@@ -4579,7 +4628,11 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>PREF_BALL_COLOR</source>
     </message>
     <message>
         <source>PREF_BALL_COLOR</source>

-        <translation>Balls</translation>
+        <translation>Ball color</translation>
+    </message>
+    <message>
+        <source>PREF_BALL_DIAMETER</source>
+        <translation>Default diameter of ball elements</translation>

     </message>
     <message>
         <source>PREF_BALL_SIZE</source>
     </message>
     <message>
         <source>PREF_BALL_SIZE</source>


@@ -4833,9 +4886,9 @@ Please, create VTK viewer and try again</translation>
     <name>SMESHGUI_PrecomputeOp</name>
     <message>
         <source>CLEAR_SUBMESH_QUESTION</source>
     <name>SMESHGUI_PrecomputeOp</name>
     <message>
         <source>CLEAR_SUBMESH_QUESTION</source>

-        <translation>Temporary submeshes on the selected geometry
+        <translation>Temporary sub-meshes on the selected geometry

 were created during preview operation.
 were created during preview operation.

-Do you want to remove all these submeshes?</translation>
+Do you want to remove all these sub-meshes?</translation>

     </message>
     <message>
         <source>SMESH_WRN_NOTHING_PREVIEW</source>
     </message>
     <message>
         <source>SMESH_WRN_NOTHING_PREVIEW</source>


@@ -4843,8 +4896,8 @@ Do you want to remove all these submeshes?</translation>
     </message>
     <message>
         <source>SMESH_REJECT_MESH_ORDER</source>
     </message>
     <message>
         <source>SMESH_REJECT_MESH_ORDER</source>

-        <translation>The submesh priority changed during preview operation.
-Do you want to restore original submesh priority?</translation>
+        <translation>The sub-mesh priority changed during preview operation.
+Do you want to restore original sub-mesh priority?</translation>

     </message>
 </context>
 <context>
     </message>
 </context>
 <context>


@@ -4940,7 +4993,7 @@ Please verify validity of entered information</translation>
     </message>
     <message>
         <source>MESH_OR_SUBMESH</source>
     </message>
     <message>
         <source>MESH_OR_SUBMESH</source>

-        <translation>Mesh or SubMesh</translation>
+        <translation>Mesh or Sub-mesh</translation>

     </message>
     <message>
         <source>PATTERN</source>
     </message>
     <message>
         <source>PATTERN</source>


@@ -5047,6 +5100,10 @@ Please select a group and try again</translation>
         <source>EXCLUDE_GROUPS</source>
         <translation>Exclude Groups</translation>
     </message>
         <source>EXCLUDE_GROUPS</source>
         <translation>Exclude Groups</translation>
     </message>

+    <message>
+        <source>SEPARATE_CORNERS_AND_MEDIUM</source>
+        <translation>No merge of corner and medium nodes</translation>
+    </message>

 </context>
 <context>
     <name>SMESHGUI_ExtrusionAlongPathDlg</name>
 </context>
 <context>
     <name>SMESHGUI_ExtrusionAlongPathDlg</name>


@@ -5104,7 +5161,7 @@ Please select a group and try again</translation>
     </message>
     <message>
         <source>SMESH_PATH_MESH</source>
     </message>
     <message>
         <source>SMESH_PATH_MESH</source>

-        <translation>Mesh or submesh</translation>
+        <translation>Mesh or sub-mesh</translation>

     </message>
     <message>
         <source>SMESH_PATH_SHAPE</source>
     </message>
     <message>
         <source>SMESH_PATH_SHAPE</source>


@@ -5163,7 +5220,7 @@ Please select valid object and try again</translation>
     </message>
     <message>
         <source>CURRENT_DIALOG</source>
     </message>
     <message>
         <source>CURRENT_DIALOG</source>

-        <translation>Current Group</translation>
+        <translation>Current Dialog</translation>

     </message>
     <message>
         <source>EDGES_TLT</source>
     </message>
     <message>
         <source>EDGES_TLT</source>


@@ -5417,6 +5474,10 @@ Please check input data and try again</translation>
         <source>OVER_CONSTRAINED_FACE</source>
         <translation>Over-constrained faces</translation>
     </message>
         <source>OVER_CONSTRAINED_FACE</source>
         <translation>Over-constrained faces</translation>
     </message>

+    <message>
+        <source>BELONG_TO_MESH_GROUP</source>
+        <translation>Belong to Mesh Group</translation>
+    </message>

     <message>
         <source>BELONG_TO_CYLINDER</source>
         <translation>Belong to Cylinder</translation>
     <message>
         <source>BELONG_TO_CYLINDER</source>
         <translation>Belong to Cylinder</translation>


@@ -6034,12 +6095,12 @@ Please specify them and try again</translation>
     </message>
     <message>
         <source>EDIT_SUBMESH_QUESTION</source>
     </message>
     <message>
         <source>EDIT_SUBMESH_QUESTION</source>

-        <translation>A submesh on the selected geometry already exists.
- Do you want to edit this submesh?</translation>
+        <translation>A sub-mesh on the selected geometry already exists.
+ Do you want to edit this sub-mesh?</translation>

     </message>
     <message>
         <source>SUBMESH_NOT_ALLOWED</source>
     </message>
     <message>
         <source>SUBMESH_NOT_ALLOWED</source>

-        <translation>No sense in creating a submesh ignored by global algorithm &quot;%1&quot;</translation>
+        <translation>No sense in creating a sub-mesh ignored by global algorithm &quot;%1&quot;</translation>

     </message>
     <message>
         <source>GEOMETRY_OBJECT_IS_NOT_DEFINED_MESH</source>
     </message>
     <message>
         <source>GEOMETRY_OBJECT_IS_NOT_DEFINED_MESH</source>


@@ -6108,7 +6169,7 @@ Please enter valid name and try again</translation>
     </message>
     <message>
         <source>NAME_OF_SUBMESH_IS_EMPTY</source>
     </message>
     <message>
         <source>NAME_OF_SUBMESH_IS_EMPTY</source>

-        <translation>Name of submesh is empty
+        <translation>Name of sub-mesh is empty

 Please enter valid name and try again</translation>
     </message>
     <message>
 Please enter valid name and try again</translation>
     </message>
     <message>


@@ -6415,8 +6476,8 @@ It is impossible to read point coordinates from file</translation>
         <translation>Preview</translation>
     </message>
     <message>
         <translation>Preview</translation>
     </message>
     <message>

-        <source>REVOLUTION_1D</source>
-        <translation>Revolution of 1D elements</translation>
+        <source>REVOLUTION</source>
+        <translation>Revolution</translation>

     </message>
     <message>
         <source>REVOLUTION_2D</source>
     </message>
     <message>
         <source>REVOLUTION_2D</source>


@@ -6650,14 +6711,14 @@ It is impossible to read point coordinates from file</translation>
     <name>SMESHGUI_MeshOrderDlg</name>
     <message>
         <source>SMESH_MESHORDER_TITLE</source>
     <name>SMESHGUI_MeshOrderDlg</name>
     <message>
         <source>SMESH_MESHORDER_TITLE</source>

-        <translation>Order of submesh in meshing process</translation>
+        <translation>Order of sub-mesh in meshing process</translation>

     </message>
 </context>
 <context>
     <name>SMESHGUI_MeshOrderOp</name>
     <message>
         <source>SMESH_NO_CONCURENT_MESH</source>
     </message>
 </context>
 <context>
     <name>SMESHGUI_MeshOrderOp</name>
     <message>
         <source>SMESH_NO_CONCURENT_MESH</source>

-        <translation>No concurent submeshes detected</translation>
+        <translation>No concurent sub-meshes detected</translation>

     </message>
 </context>
 <context>
     </message>
 </context>
 <context>