<message>
<source>EDITERR_NO_MEDIUM_ON_GEOM</source>
<translation>Some medium nodes not placed on geometry to avoid
- distorting elements shown in magenta</translation>
+ distorting elements shown in magenta.</translation>
</message>
<message>
<source>SMESH_GEOM</source>
<source>MEN_COMPUTE</source>
<translation>Compute</translation>
</message>
+ <message>
+ <source>MEN_RE_COMPUTE</source>
+ <translation>Clear + Compute</translation>
+ </message>
+ <message>
+ <source>MEN_SHOW_ERRORS</source>
+ <translation>Show Compute Errors</translation>
+ </message>
<message>
<source>MEN_COMPUTE_SUBMESH</source>
<translation>Compute Sub-mesh</translation>
<source>MEN_CONSTRUCT_GROUP</source>
<translation>Construct Group</translation>
</message>
+ <message>
+ <source>MEN_MG_ADAPT</source>
+ <translation>Remesh with MG_Adapt</translation>
+ </message>
+ <message>
+ <source>Args</source>
+ <translation>Arguments</translation>
+ </message>
+ <message>
+ <source>MeshOut</source>
+ <translation>Mesh Out</translation>
+ </message>
+ <message>
+ <source>MeshIn</source>
+ <translation>Mesh In</translation>
+ </message>
+ <message>
+ <source>MEDFile</source>
+ <translation>MED file</translation>
+ </message>
+ <message>
+ <source>Browser</source>
+ <translation>Browser</translation>
+ </message>
+ <message>
+ <source>Publish_MG_ADAPT</source>
+ <translation>Publish</translation>
+ </message>
+ <message>
+ <source>SIZE_MAP_FIELD</source>
+ <translation>Size map field</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_FIELD_NAME</source>
+ <translation>Field Name</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_MED_FILE_1</source>
+ <translation>This MED file cannot be read.</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_MED_FILE_2</source>
+ <translation>No mesh in this MED file.</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_MED_FILE_3</source>
+ <translation>More than one mesh in this MED file.</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_MED_FILE_4</source>
+ <translation>The mesh in this MED file cannot be read.</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_MED_FILE_5</source>
+ <translation>No field in this MED file.</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_ERROR</source>
+ <translation>Error</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_CH_ST</source>
+ <translation>Chosen time step</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_RANK</source>
+ <translation>Rank</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_TSTP</source>
+ <translation>Time step </translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_NO_T_ST</source>
+ <translation>No time step</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_L_ST</source>
+ <translation>Last time step</translation>
+ </message>
+ <message>
+ <source>MeshName</source>
+ <translation>Mesh name</translation>
+ </message>
+ <message>
+ <source>LOCAL_MG_ADAPT</source>
+ <translation>Local</translation>
+ </message>
+ <message>
+ <source>BACKGRND_MG_ADAPT</source>
+ <translation>Background</translation>
+ </message>
+ <message>
+ <source>CNST_MG_ADAPT</source>
+ <translation>Constant</translation>
+ </message>
+ <message>
+ <source>MED_FILE_BCKG</source>
+ <translation>MED file background size map</translation>
+ </message>
+ <message>
+ <source>VALUE_MG_ADAPT</source>
+ <translation>Value</translation>
+ </message>
+ <message>
+ <source>SIZE_MAP_DEF</source>
+ <translation>Size map definition</translation>
+ </message>
+ <message>
+ <source>ADVOP</source>
+ <translation>Advanced Options</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_DIAG_1</source>
+ <translation>Adaptation succeeded.</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_DIAG_2</source>
+ <translation>Adaptation failed.</translation>
+ </message>
<message>
<source>MEN_CONV_TO_QUAD</source>
<translation>Convert to/from quadratic</translation>
<source>MEN_MODIFY</source>
<translation>Modification</translation>
</message>
+ <message>
+ <source>MEN_ADAPT</source>
+ <translation>Adaptation</translation>
+ </message>
<message>
<source>MEN_MEASURE</source>
<translation>Measurements</translation>
</message>
<message>
<source>MEN_SAVE_DISTRIBUTION</source>
- <translation>Export ...</translation>
+ <translation>Export the distribution...</translation>
</message>
<message>
<source>MEN_SHOW_DISTRIBUTION</source>
<source>SMESH_AVAILABLE</source>
<translation>Available</translation>
</message>
+ <message>
+ <source>SMESH_NOT_AVAILABLE</source>
+ <translation>Not available</translation>
+ </message>
<message>
<source>SMESH_AVAILABLE_ALGORITHMS</source>
<translation>Available algorithms</translation>
<source>SMESH_MULTICOLOR</source>
<translation>Multicolor</translation>
</message>
+ <message>
+ <source>ADAPT_PREF_TAB_GENERAL</source>
+ <translation>Adaptation</translation>
+ </message>
+ <message>
+ <source>ADAPT_PREF_NONE</source>
+ <translation>None</translation>
+ </message>
+ <message>
+ <source>ADAPT_PREF_MG_ADAPT</source>
+ <translation>Adaptation with MG-Adapt</translation>
+ </message>
+ <message>
+ <source>ADAPT_PREF_MG_ADAPT_FILE_MAILLAGE_OUT</source>
+ <translation>Write the OUT mesh</translation>
+ </message>
+ <message>
+ <source>ADAPT_PREF_MG_ADAPT_PUBLICATION_MAILLAGE_OUT</source>
+ <translation>Publication of the OUT mesh</translation>
+ </message>
+ <message>
+ <source>OPTION_VALUE_COLUMN</source>
+ <translation>Option</translation>
+ </message>
+ <message>
+ <source>OPTION_NAME_COLUMN</source>
+ <translation>Value</translation>
+ </message>
+ <message>
+ <source>compute_ridges</source>
+ <translation>Compute ridges</translation>
+ </message>
+ <message>
+ <source>max_memory</source>
+ <translation>Maximum memory (Mb)</translation>
+ </message>
+ <message>
+ <source>Adaption</source>
+ <translation>adaptation</translation>
+ </message>
+ <message>
+ <source>components</source>
+ <translation>Components</translation>
+ </message>
+ <message>
+ <source>ADAPT_PREF_MG_ADAPT_SIZE_MAP</source>
+ <translation>Size map</translation>
+ </message>
+ <message>
+ <source>ADAPT_PREF_MG_ADAPT_SIZE_MAP_LOCAL</source>
+ <translation>Local</translation>
+ </message>
+ <message>
+ <source>ADAPT_PREF_MG_ADAPT_SIZE_MAP_BACKGROUND</source>
+ <translation>Background</translation>
+ </message>
+ <message>
+ <source>ADAPT_PREF_MG_ADAPT_TIME_STEP_LAST</source>
+ <translation>Last</translation>
+ </message>
+ <message>
+ <source>ADAPT_PREF_MG_ADAPT_TIME_STEP</source>
+ <translation>Choosen time step</translation>
+ </message>
+ <message>
+ <source>ADAPT_PREF_MG_ADAPT_TIME_STEP_C</source>
+ <translation>Value</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_SELECT_FILE_0</source>
+ <translation>MG-ADAPT select file</translation>
+ </message>
+ <message>
+ <source>ADAPT_PREF_MG_ADAPT_ADVOP</source>
+ <translation>Advanced Options</translation>
+ </message>
<message>
<source>SMESH_VISU_PROBLEM</source>
<translation>Mesh visualization failed</translation>
<source>STB_CONSTRUCT_GROUP</source>
<translation>Construct Group</translation>
</message>
+ <message>
+ <source>STB_MG_ADAPT</source>
+ <translation>Remesh with MG_Adapt</translation>
+ </message>
<message>
<source>STB_CONV_TO_QUAD</source>
<translation>Convert to/from quadratic</translation>
<source>TB_CTRL3D</source>
<translation>Volume Controls Toolbar</translation>
</message>
+ <message>
+ <source>TB_ADAPTATION</source>
+ <translation>Adaptation Toolbar</translation>
+ </message>
<message>
<source>TB_MEASUREM</source>
<translation>Measurements Toolbar</translation>
<source>TOP_CONSTRUCT_GROUP</source>
<translation>Construct Group</translation>
</message>
+ <message>
+ <source>TOP_MG_ADAPT</source>
+ <translation>Remesh with MG_Adapt</translation>
+ </message>
<message>
<source>TOP_CONV_TO_QUAD</source>
<translation>Convert to/from quadratic</translation>
<message>
<source>FULL_RECOMPUTE_QUESTION</source>
<translation>
-The mesh has been edited since a last total re-compute
-that may prevent successful computation.
+The mesh has been edited since a last total re-compute
+that may prevent successful computation.
Do you wish to re-compute the mesh totally to discard the modifications?
</translation>
</message>
</message>
<message>
<source>NB_GROUPS_CREATED</source>
- <translation>%1 groups of faces created</translation>
+ <translation>%1 group(s) of faces created</translation>
</message>
</context>
<context>
<source>PREF_NB_SEGMENTS</source>
<translation>Default Number of Segments</translation>
</message>
+ <message>
+ <source>PREF_USE_MESHGEMS_HYPOSET</source>
+ <translation>Use MeshGems meshers when assigning set of hypotheses</translation>
+ </message>
<message>
<source>SMESH_PREF_MESH_LOADING</source>
<translation>Mesh loading</translation>
<source>PREF_PREVIEW_CHUNK_SIZE</source>
<translation>Sub-shapes preview chunk size</translation>
</message>
+ <message>
+ <source>INFO_WELCOME_TO_SMESH</source>
+ <translation>Welcome to Mesh</translation>
+ </message>
+ <message>
+ <source>INFO_GRP_CREATE_MESH</source>
+ <translation>Create mesh</translation>
+ </message>
+ <message>
+ <source>INFO_DEFINE_ALGOS</source>
+ <translation>Choose algorithms</translation>
+ </message>
+ <message>
+ <source>INFO_DEFINE_HYPOS</source>
+ <translation>Define hypotheses</translation>
+ </message>
+ <message>
+ <source>INFO_COMPUTE</source>
+ <translation>Compute</translation>
+ </message>
+ <message>
+ <source>INFO_REFINE</source>
+ <translation>Add refinements</translation>
+ </message>
+ <message>
+ <source>INFO_REFINE_LOCAL_SIZE</source>
+ <translation>via local sizes with some hypotheses</translation>
+ </message>
+ <message>
+ <source>INFO_REFINE_SUBMESH</source>
+ <translation>via sub-meshes</translation>
+ </message>
+ <message>
+ <source>INFO_GRP_IMPORT_MESH</source>
+ <translation>Import mesh</translation>
+ </message>
+ <message>
+ <source>INFO_AVAILABLE_FORMATS</source>
+ <translation>Available formats</translation>
+ </message>
+ <message>
+ <source>INFO_GRP_CHECK_MESH</source>
+ <translation> Check mesh quality</translation>
+ </message>
+ <message>
+ <source>INFO_DISPLAY</source>
+ <translation>Display mesh</translation>
+ </message>
+ <message>
+ <source>INFO_QUALITY_INFO</source>
+ <translation>Display some quality criteria</translation>
+ </message>
+ <message>
+ <source>INFO_QUALITY_AREA</source>
+ <translation>area</translation>
+ </message>
+ <message>
+ <source>INFO_QUALITY_VOLUME</source>
+ <translation>volume</translation>
+ </message>
+ <message>
+ <source>INFO_QUALITY_ASPECT_RATION</source>
+ <translation>aspect ration</translation>
+ </message>
+ <message>
+ <source>INFO_CLIPPING</source>
+ <translation>Add clipping planes</translation>
+ </message>
</context>
<context>
<name>SMESHGUI_GroupDlg</name>
</message>
<message>
<source>HYPOTHESES_SETS</source>
- <translation>Assign a set of hypotheses</translation>
+ <translation>Assign a set of automatic hypotheses</translation>
</message>
<message>
<source>MESH</source>
<source>NAME</source>
<translation>Name</translation>
</message>
+ <message>
+ <source>CREATE_ALL_GROUPS</source>
+ <translation>Create all Groups on Geometry</translation>
+ </message>
</context>
<context>
<name>SMESHGUI_MeshOp</name>
<message>
<source>GEOMETRY_OBJECT_IS_NOT_DEFINED_MESH</source>
<translation>Geometry object is not defined.
-Do you want to create an empty mesh
+Do you want to create an empty mesh
without algorithms and hypotheses? </translation>
</message>
<message>
</message>
<message>
<source>CONCURRENT_SUBMESH_APPEARS</source>
- <translation>
-The assigned algorithm has the same priority as one assigned to an
+ <translation>
+The assigned algorithm has the same priority as one assigned to an
adjacent sub-mesh, hence it's undefined which algorithm to use for
meshing boundary shared by two sub-meshes. Would you like to set
the order of sub-mesh computation? </translation>
<message>
<source>SUBSHAPES_NOT_FOUND_MSG</source>
<translation>
-Some sub-shapes not found in the new geometry. They are listed
+Some sub-shapes not found in the new geometry. They are listed
below along with dependent mesh objects that are marked with
red in the Object Browser.</translation>
</message>
<translation>Option value</translation>
</message>
</context>
+<context>
+ <name>SMESHGUI_GenericHypothesisCreator</name>
+ <message>
+ <source>AverageLengthForHypoSet</source>
+ <translation>Mean Size</translation>
+ </message>
+</context>
</TS>
