msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2006-01-13 13:50+0300\n"
+"PO-Revision-Date: 2007-01-19 10:44+0300\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+# This is a Qt message file in .po format. Each msgid starts with
+# a scope. This scope should *NOT* be translated - eg. "Foo::Bar"
+# would be translated to "Pub", not "Foo::Pub".
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"PO-Revision-Date: 2006-12-28 12:10+0300\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"MIME-Version: 1.0\n"
msgid "SMESH_BUT_CANCEL"
msgstr "&Cancel"
+#Help
+msgid "SMESH_BUT_HELP"
+msgstr "&Help"
+
#Add
msgid "SMESH_BUT_ADD"
msgstr "A&dd"
msgid "SMESH_WRN_EMPTY_NAME"
msgstr "Empty name is not valid"
+#Not available data
+msgid "SMESH_WRN_NO_AVAILABLE_DATA"
+msgstr "No available data in selection"
+
#Smesh polyedre cretion error
msgid "SMESH_POLYEDRE_CREATE_ERROR"
msgstr "Polyedron creation error"
+#Export mesh
+msgid "SMESH_EXPORT_FAILED"
+msgstr "Mesh export failed.\nProbably, there is not enough space on disk."
+
#-------------------------------------------------------------------------
# MEN
#-------------------------------------------------------------------------
msgid "SMESH_MESHINFO_NAME"
msgstr "Name"
-#Faces :
+#Order :
+msgid "SMESH_MESHINFO_ORDER0"
+msgstr "Total"
+
+msgid "SMESH_MESHINFO_ORDER1"
+msgstr "Linear"
+
+msgid "SMESH_MESHINFO_ORDER2"
+msgstr "Quadratic"
+
+#Elements :
msgid "SMESH_MESHINFO_ELEMENTS"
msgstr "Elements"
msgid "SMESHGUI_FilterTable::BELONG_TO_CYLINDER"
msgstr "Belong to Cylinder"
+msgid "SMESHGUI_FilterTable::BELONG_TO_GENSURFACE"
+msgstr "Belong to Surface"
+
msgid "SMESHGUI_FilterTable::LYING_ON_GEOM"
msgstr "Lying on Geom"
msgid "SMESH_RM_HYP_WRN"
msgstr "\"%1\" unassigned but:\n"
+# Hypothesis_Status:
+
msgid "SMESH_HYP_1"
msgstr "Algorithm misses a hypothesis"
msgstr "Hypothesis has a bad parameter value"
msgid "SMESH_HYP_4"
-msgstr "Unknown fatal error at hypothesis definition"
+msgstr "Algorithm is hidden by an algorithm of upper dimension generating all-dimensions elements"
msgid "SMESH_HYP_5"
-msgstr "Hypothesis is not suitable in the current context"
+msgstr "Algorithm hides algorithm(s) of lower dimension by generating all-dimensions elements"
msgid "SMESH_HYP_6"
-msgstr "Non-conform mesh is produced using applied hypotheses"
+msgstr "Unknown fatal error at hypothesis definition"
msgid "SMESH_HYP_7"
-msgstr "Such dimention hypothesis is already assigned to the shape"
+msgstr "Hypothesis is not suitable in the current context"
msgid "SMESH_HYP_8"
-msgstr "Hypothesis and submesh dimensions mismatch"
+msgstr "Non-conform mesh is produced using applied hypotheses"
msgid "SMESH_HYP_9"
+msgstr "Such dimention hypothesis is already assigned to the shape"
+
+msgid "SMESH_HYP_10"
+msgstr "Hypothesis and submesh dimensions mismatch"
+
+msgid "SMESH_HYP_11"
msgstr "Shape is neither the main one, nor its subshape, nor a valid group"
+msgid "SMESH_HYP_12"
+msgstr "Geomerty mismatches algorithm's expectation"
+
+# AlgoStateErrorName
+
msgid "MISSING_ALGO"
msgstr "%3 %2D algorithm is missing"
msgid "MISSING_HYPO"
msgstr "%3 %2D algorithm \"%1\" misses %4D hypothesis"
+msgid "BAD_PARAM_VALUE"
+msgstr "Hypothesis of %3 %2D algorithm \"%1\" has a bad parameter value"
+
msgid "NOT_CONFORM_MESH"
msgstr "%3 %2D algorithm \"%1\" would produce not conform mesh: global \"Not Conform Mesh Allowed\" hypotesis is missing"
msgstr "Mesh"
msgid "SMESHGUI_ExtrusionAlongPathDlg::SMESH_PATH_SHAPE"
-msgstr "Shape (edge or wire)"
+msgstr "Shape (edge)"
msgid "SMESHGUI_ExtrusionAlongPathDlg::SMESH_PATH_START"
-msgstr "Start point"
+msgstr "Start node"
msgid "SMESHGUI_ExtrusionAlongPathDlg::SMESH_USE_ANGLES"
msgstr "Use Angles"
+msgid "SMESHGUI_ExtrusionAlongPathDlg::LINEAR_ANGLES"
+msgstr "Linear variation of the angles"
+
msgid "SMESHGUI_ExtrusionAlongPathDlg::SMESH_ANGLES"
msgstr "Rotation Angles"
msgstr "Add Quadratic Tetrahedron"
msgid "SMESHGUI_AddQuadraticElementDlg::SMESH_ADD_QUADRATIC_PYRAMID"
-msgstr "Add Quadratic PYRAMID"
+msgstr "Add Quadratic Pyramid"
msgid "SMESHGUI_AddQuadraticElementDlg::SMESH_ADD_QUADRATIC_PENTAHEDRON"
msgstr "Add Quadratic Pentahedron"
msgid "SMESHGUI_CreatePatternDlg::ERR_LOADF_CLOSED_FACE"
msgstr "It is impossible to create pattern from face having seam edge"
+msgid "SMESHGUI_CreatePatternDlg::ERR_LOADF_CANT_PROJECT"
+msgstr "Impossible to perform projection of nodes to the face"
+
msgid "SMESHGUI_CreatePatternDlg::ERR_LOADV_BAD_SHAPE"
msgstr "Pattern can be created from closed shell or solid with 6 faces only"
msgid "MEN_MAP"
msgstr "Pattern mapping"
+msgid "MEN_CONV_TO_QUAD"
+msgstr "Convert to/from quadratic"
+
msgid "MEN_EXTRUSION_ALONG"
msgstr "Extrusion along a path"
msgid "TOP_MAP"
msgstr "Pattern mapping"
+msgid "TOP_CONV_TO_QUAD"
+msgstr "Convert to/from quadratic"
+
msgid "TOP_EXTRUSION_ALONG"
msgstr "Extrusion along a path"
msgid "STB_MAP"
msgstr "Pattern mapping"
+msgid "STB_CONV_TO_QUAD"
+msgstr "Convert to/from quadratic"
+
msgid "STB_EXTRUSION_ALONG"
msgstr "Extrusion along a path"
msgid "SMESHGUI::PREF_COLOR"
msgstr "Color"
+msgid "SMESHGUI::PREF_TITLE_COLOR"
+msgstr "Title color"
+
+msgid "SMESHGUI::PREF_LABELS_COLOR"
+msgstr "Labels color"
+
msgid "SMESHGUI::PREF_SIZE"
msgstr "Size"
msgid "SMESHGUI::PREF_AUTO_GROUPS"
msgstr "Automatically create groups for MED export"
+msgid "SMESHGUI::PREF_RENUMBER"
+msgstr "Automatic renumbering"
+
#-----------------------------------------------------------
+msgid "SMESHGUI_MeshDlg::DIM_0D"
+msgstr "0D"
+
msgid "SMESHGUI_MeshDlg::DIM_1D"
msgstr "1D"
msgid "SMESHGUI_MeshOp::MESH_IS_NOT_DEFINED"
msgstr "Mesh is not defined\nPlease specify it and try again"
+
+
+#-----------------------------------------------------------
+
+msgid "SMESHGUI_ConvToQuadDlg::CAPTION"
+msgstr "Convert to/from quadratic"
+
+msgid "SMESHGUI_ConvToQuadDlg::MESH"
+msgstr "Mesh"
+
+msgid "SMESHGUI_ConvToQuadDlg::MEDIUMNDS"
+msgstr "Medium nodes on geometry"
+
+msgid "SMESHGUI_ConvToQuadDlg::RADIOBTN_1"
+msgstr "Convert to quadratic"
+
+msgid "SMESHGUI_ConvToQuadDlg::RADIOBTN_2"
+msgstr "Convert from quadratic"
+
+msgid "SMESHGUI_ConvToQuadOp::MESH_IS_NOT_SELECTED"
+msgstr "Mesh is not selected\nPlease specify it and try again"
+
+msgid "SMESHGUI_ConvToQuadOp::REF_IS_NULL"
+msgstr "No valid mesh object selected"