-// Copyright (C) 2007-2012 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
#include "SMESHGUI_MeshInfo.h"
-#include "SMESH_Actor.h"
-#include "SMESHGUI.h"
-#include "SMESHGUI_IdValidator.h"
-#include "SMESHGUI_Utils.h"
-#include "SMESHGUI_VTKUtils.h"
#include "SMDSAbs_ElementType.hxx"
-#include "SMDS_Mesh.hxx"
#include "SMDS_BallElement.hxx"
#include "SMDS_EdgePosition.hxx"
#include "SMDS_FacePosition.hxx"
+#include "SMDS_Mesh.hxx"
#include "SMESHDS_Mesh.hxx"
-#include "SMESH_ControlsDef.hxx"
+#include "SMESHGUI.h"
+#include "SMESHGUI_FilterUtils.h"
+#include "SMESHGUI_IdValidator.h"
+#include "SMESHGUI_SpinBox.h"
+#include "SMESHGUI_Utils.h"
+#include "SMESHGUI_VTKUtils.h"
+#include "SMESH_Actor.h"
#include <LightApp_SelectionMgr.h>
#include <SUIT_FileDlg.h>
#include <QLineEdit>
#include <QMenu>
#include <QPushButton>
+#include <QToolButton>
#include <QRadioButton>
#include <QTextStream>
#include <QTabWidget>
#include <SALOMEconfig.h>
#include CORBA_SERVER_HEADER(GEOM_Gen)
+namespace {
+
const int SPACING = 6;
const int MARGIN = 9;
const int MAXITEMS = 10;
NodeConnectivity = 100,
ElemConnectivity,
};
+} // namesapce
/*!
\class ExtraWidget
\internal
*/
-
class ExtraWidget : public QWidget
{
public:
QCheckBox* myBaseChk;
QCheckBox* myElemChk;
QCheckBox* myAddChk;
+ QCheckBox* myCtrlChk;
};
/*!
myBaseChk = new QCheckBox( SMESHGUI::tr( "PREF_DUMP_BASE_INFO" ), hB );
myElemChk = new QCheckBox( SMESHGUI::tr( "PREF_DUMP_ELEM_INFO" ), hB );
myAddChk = new QCheckBox( SMESHGUI::tr( "PREF_DUMP_ADD_INFO" ), hB );
+ myCtrlChk = new QCheckBox( SMESHGUI::tr( "PREF_DUMP_CTRL_INFO" ), hB );
- QHBoxLayout* layout = new QHBoxLayout( hB );
- layout->addWidget( myBaseChk );
- layout->addWidget( myElemChk );
- layout->addWidget( myAddChk );
+ QGridLayout* layout = new QGridLayout( hB );
+ layout->addWidget( myBaseChk, 0, 0 );
+ layout->addWidget( myElemChk, 0, 1 );
+ layout->addWidget( myAddChk, 1, 0 );
+ layout->addWidget( myCtrlChk, 1, 1 );
QPushButton* pb = new QPushButton( this );
l->addWidget( a3DHexPriTotal, 25, 1 );
l->addWidget( a3DPolLab, 26, 0 );
l->addWidget( a3DPolTotal, 26, 1 );
- l->addWidget( myLoadBtn, 27, 1, 1, 3 );
+ l->addWidget( myLoadBtn, 28, 1, 1, 3 );
l->setColumnStretch( 0, 0 );
l->setColumnStretch( 1, 5 );
l->setColumnStretch( 2, 5 );
l->setColumnStretch( 3, 5 );
- l->setRowStretch( 23, 5 );
+ l->setRowStretch( 27, 5 );
clear();
}
else if ( !aGroup->_is_nil() ) {
QString objType;
switch( aGroup->GetType() ) {
- case SMESH::NODE:
- objType = tr( "OBJECT_GROUP_NODES" );
- break;
- case SMESH::EDGE:
- objType = tr( "OBJECT_GROUP_EDGES" );
- break;
- case SMESH::FACE:
- objType = tr( "OBJECT_GROUP_FACES" );
- break;
- case SMESH::VOLUME:
- objType = tr( "OBJECT_GROUP_VOLUMES" );
- break;
- case SMESH::ELEM0D:
- objType = tr( "OBJECT_GROUP_0DELEMS" );
- break;
- case SMESH::BALL:
- objType = tr( "OBJECT_GROUP_BALLS" );
- break;
- default:
- objType = tr( "OBJECT_GROUP" );
- break;
+ case SMESH::NODE: objType = tr( "OBJECT_GROUP_NODES" );break;
+ case SMESH::EDGE: objType = tr( "OBJECT_GROUP_EDGES" );break;
+ case SMESH::FACE: objType = tr( "OBJECT_GROUP_FACES" );break;
+ case SMESH::VOLUME:objType = tr( "OBJECT_GROUP_VOLUMES" );break;
+ case SMESH::ELEM0D:objType = tr( "OBJECT_GROUP_0DELEMS" );break;
+ case SMESH::BALL: objType = tr( "OBJECT_GROUP_BALLS" );break;
+ default: objType = tr( "OBJECT_GROUP" );break;
}
myWidgets[iObject][iSingle]->setProperty( "text", objType );
}
myWidgets[i1D][iTotal] ->setProperty( "text", QString::number( nbEdges ) );
myWidgets[i1D][iLinear] ->setProperty( "text", QString::number( info[SMDSEntity_Edge] ) );
myWidgets[i1D][iQuadratic]->setProperty( "text", QString::number( info[SMDSEntity_Quad_Edge] ) );
- long nbTriangles = info[SMDSEntity_Triangle] + info[SMDSEntity_Quad_Triangle];
+ long nbTriangles = info[SMDSEntity_Triangle] + info[SMDSEntity_Quad_Triangle] + info[SMDSEntity_BiQuad_Triangle];
long nbQuadrangles = info[SMDSEntity_Quadrangle] + info[SMDSEntity_Quad_Quadrangle] + info[SMDSEntity_BiQuad_Quadrangle];
long nb2DLinear = info[SMDSEntity_Triangle] + info[SMDSEntity_Quadrangle] + info[SMDSEntity_Polygon];
- long nb2DQuadratic = info[SMDSEntity_Quad_Triangle] + info[SMDSEntity_Quad_Quadrangle] + info[SMDSEntity_BiQuad_Quadrangle];
- myWidgets[i2D][iTotal] ->setProperty( "text", QString::number( nb2DLinear + nb2DQuadratic ) );
+ long nb2DQuadratic = info[SMDSEntity_Quad_Triangle] + info[SMDSEntity_BiQuad_Triangle] + info[SMDSEntity_Quad_Quadrangle] + info[SMDSEntity_BiQuad_Quadrangle];
+ myWidgets[i2D][iTotal] ->setProperty( "text", QString::number( nb2DLinear + nb2DQuadratic ));
myWidgets[i2D][iLinear] ->setProperty( "text", QString::number( nb2DLinear ) );
myWidgets[i2D][iQuadratic] ->setProperty( "text", QString::number( nb2DQuadratic ) );
myWidgets[i2DTriangles][iTotal] ->setProperty( "text", QString::number( nbTriangles ) );
myWidgets[i2DTriangles][iLinear] ->setProperty( "text", QString::number( info[SMDSEntity_Triangle] ) );
- myWidgets[i2DTriangles][iQuadratic] ->setProperty( "text", QString::number( info[SMDSEntity_Quad_Triangle] ) );
+ myWidgets[i2DTriangles][iQuadratic] ->setProperty( "text", QString::number( info[SMDSEntity_Quad_Triangle] + info[SMDSEntity_BiQuad_Triangle]) );
myWidgets[i2DQuadrangles][iTotal] ->setProperty( "text", QString::number( nbQuadrangles ) );
myWidgets[i2DQuadrangles][iLinear] ->setProperty( "text", QString::number( info[SMDSEntity_Quadrangle] ) );
myWidgets[i2DQuadrangles][iQuadratic]->setProperty( "text", QString::number( info[SMDSEntity_Quad_Quadrangle] + info[SMDSEntity_BiQuad_Quadrangle] ));
SMESH::Controls::NumericalFunctorPtr afunctor;
if ( !e ) return;
- // element ID && type
+ // Element ID && Type
QString stype;
switch( e->GetType() ) {
case SMDSAbs_0DElement:
myInfo->append( QString( "<b>%1 #%2</b>" ).arg( stype ).arg( id ) );
// separator
myInfo->append( "" );
- // geometry type
+
+ // Geometry type
QString gtype;
switch( e->GetEntityType() ) {
case SMDSEntity_Triangle:
case SMDSEntity_Quad_Triangle:
+ case SMDSEntity_BiQuad_Triangle:
gtype = SMESHGUI_ElemInfo::tr( "TRIANGLE" ); break;
case SMDSEntity_Quadrangle:
case SMDSEntity_Quad_Quadrangle:
}
if ( !gtype.isEmpty() )
myInfo->append( QString( "<b>%1:</b> %2" ).arg( SMESHGUI_ElemInfo::tr( "TYPE" ) ).arg( gtype ) );
- // quadratic flag and gravity center (any element except 0D)
+
+ // Quadratic flag (any element except 0D)
if ( e->GetEntityType() > SMDSEntity_0D && e->GetEntityType() < SMDSEntity_Ball ) {
- // quadratic flag
myInfo->append( QString( "<b>%1?</b> %2" ).arg( SMESHGUI_ElemInfo::tr( "QUADRATIC" ) ).arg( e->IsQuadratic() ? SMESHGUI_ElemInfo::tr( "YES" ) : SMESHGUI_ElemInfo::tr( "NO" ) ) );
- // separator
- myInfo->append( "" );
- // gravity center
- XYZ gc = gravityCenter( e );
- myInfo->append( QString( "<b>%1:</b> (%2, %3, %4)" ).arg( SMESHGUI_ElemInfo::tr( "GRAVITY_CENTER" ) ).arg( gc.x() ).arg( gc.y() ).arg( gc.z() ) );
}
if ( const SMDS_BallElement* ball = dynamic_cast<const SMDS_BallElement*>( e )) {
- // ball diameter
+ // Ball diameter
myInfo->append( QString( "<b>%1:</b> %2" ).arg( SMESHGUI_ElemInfo::tr( "BALL_DIAMETER" ) ).arg( ball->GetDiameter() ));
}
// separator
myInfo->append( "" );
- // connectivity
+
+ // Connectivity
SMDS_ElemIteratorPtr nodeIt = e->nodesIterator();
for ( int idx = 1; nodeIt->more(); idx++ ) {
const SMDS_MeshNode* node = static_cast<const SMDS_MeshNode*>( nodeIt->next() );
}
// separator
myInfo->append( "" );
- //controls
+
+ // Controls
myInfo->append( QString( "<b>%1:</b>" ).arg( SMESHGUI_ElemInfo::tr( "CONTROLS" ) ) );
//Length
- if ( e->GetType() == SMDSAbs_Edge ) {
+ if ( e->GetType() == SMDSAbs_Edge ) {
afunctor.reset( new SMESH::Controls::Length() );
afunctor->SetMesh( actor()->GetObject()->GetMesh() );
afunctor->SetPrecision( cprecision );
myInfo->append( QString( "- <b>%1:</b> %2" ).arg( tr( "LENGTH_EDGES" ) ).arg( afunctor->GetValue( id ) ) );
}
if( e->GetType() == SMDSAbs_Face ) {
- //Area
+ //Area
afunctor.reset( new SMESH::Controls::Area() );
afunctor->SetMesh( actor()->GetObject()->GetMesh() );
afunctor->SetPrecision( cprecision );
myInfo->append( QString( "- <b>%1:</b> %2" ).arg( tr( "AREA_ELEMENTS" ) ).arg( afunctor->GetValue( id ) ) );
- //Taper
+ //Taper
afunctor.reset( new SMESH::Controls::Taper() );
afunctor->SetMesh( actor()->GetObject()->GetMesh() );
afunctor->SetPrecision( cprecision );
myInfo->append( QString( "- <b>%1:</b> %2" ).arg( tr( "TAPER_ELEMENTS" ) ).arg( afunctor->GetValue( id ) ) );
- //AspectRatio2D
+ //AspectRatio2D
afunctor.reset( new SMESH::Controls::AspectRatio() );
afunctor->SetMesh( actor()->GetObject()->GetMesh() );
myInfo->append( QString( "- <b>%1:</b> %2" ).arg( tr( "ASPECTRATIO_ELEMENTS" ) ).arg( afunctor->GetValue( id ) ) );
afunctor->SetMesh( actor()->GetObject()->GetMesh() );
myInfo->append( QString( "- <b>%1:</b> %2" ).arg( tr( "MAX_ELEMENT_LENGTH_3D" ) ).arg( afunctor->GetValue( id ) ) );
}
- // element position
+ // separator
+ myInfo->append( "" );
+
+ // Gravity center
+ XYZ gc = gravityCenter( e );
+ myInfo->append( QString( "<b>%1:</b> (%2, %3, %4)" ).arg( SMESHGUI_ElemInfo::tr( "GRAVITY_CENTER" ) ).arg( gc.x() ).arg( gc.y() ).arg( gc.z() ) );
+
+ // Element position
if ( e->GetType() >= SMDSAbs_Edge && e->GetType() <= SMDSAbs_Volume ) {
SMESH::SMESH_Mesh_ptr aMesh = actor()->GetObject()->GetMeshServer();
if ( !CORBA::is_nil( aMesh ) ) {
}
}
}
- // groups element belongs to
+
+ // Groups the element belongs to
SMESH::SMESH_Mesh_ptr aMesh = actor()->GetObject()->GetMeshServer();
if ( !CORBA::is_nil( aMesh ) ) {
SMESH::ListOfGroups_var groups = aMesh->GetGroups();
// element ID && type
QString stype;
switch( e->GetType() ) {
- case SMDSAbs_0DElement:
- stype = SMESHGUI_ElemInfo::tr( "0D_ELEMENT" ); break;
- case SMDSAbs_Ball:
- stype = SMESHGUI_ElemInfo::tr( "BALL" ); break;
- case SMDSAbs_Edge:
- stype = SMESHGUI_ElemInfo::tr( "EDGE" ); break;
- case SMDSAbs_Face:
- stype = SMESHGUI_ElemInfo::tr( "FACE" ); break;
- case SMDSAbs_Volume:
- stype = SMESHGUI_ElemInfo::tr( "VOLUME" ); break;
- default:
- break;
+ case SMDSAbs_0DElement: stype = SMESHGUI_ElemInfo::tr( "0D_ELEMENT" ); break;
+ case SMDSAbs_Ball: stype = SMESHGUI_ElemInfo::tr( "BALL" ); break;
+ case SMDSAbs_Edge: stype = SMESHGUI_ElemInfo::tr( "EDGE" ); break;
+ case SMDSAbs_Face: stype = SMESHGUI_ElemInfo::tr( "FACE" ); break;
+ case SMDSAbs_Volume: stype = SMESHGUI_ElemInfo::tr( "VOLUME" ); break;
+ default:;
}
if ( stype.isEmpty() ) return;
QTreeWidgetItem* elemItem = createItem( 0, Bold | All );
switch( e->GetEntityType() ) {
case SMDSEntity_Triangle:
case SMDSEntity_Quad_Triangle:
+ case SMDSEntity_BiQuad_Triangle:
gtype = SMESHGUI_ElemInfo::tr( "TRIANGLE" ); break;
case SMDSEntity_Quadrangle:
case SMDSEntity_Quad_Quadrangle:
typeItem->setText( 0, SMESHGUI_ElemInfo::tr( "TYPE" ) );
typeItem->setText( 1, gtype );
}
- // quadratic flag and gravity center (any element except 0D)
- if ( e->GetEntityType() > SMDSEntity_0D && e->GetEntityType() < SMDSEntity_Ball ) {
+ // quadratic flag (for edges, faces and volumes)
+ if ( e->GetType() >= SMDSAbs_Edge && e->GetType() <= SMDSAbs_Volume ) {
// quadratic flag
QTreeWidgetItem* quadItem = createItem( elemItem, Bold );
quadItem->setText( 0, SMESHGUI_ElemInfo::tr( "QUADRATIC" ) );
quadItem->setText( 1, e->IsQuadratic() ? SMESHGUI_ElemInfo::tr( "YES" ) : SMESHGUI_ElemInfo::tr( "NO" ) );
- // gravity center
- XYZ gc = gravityCenter( e );
- QTreeWidgetItem* gcItem = createItem( elemItem, Bold );
- gcItem->setText( 0, SMESHGUI_ElemInfo::tr( "GRAVITY_CENTER" ) );
- QTreeWidgetItem* xItem = createItem( gcItem );
- xItem->setText( 0, "X" );
- xItem->setText( 1, QString::number( gc.x(), precision > 0 ? 'f' : 'g', qAbs( precision ) ) );
- QTreeWidgetItem* yItem = createItem( gcItem );
- yItem->setText( 0, "Y" );
- yItem->setText( 1, QString::number( gc.y(), precision > 0 ? 'f' : 'g', qAbs( precision ) ) );
- QTreeWidgetItem* zItem = createItem( gcItem );
- zItem->setText( 0, "Z" );
- zItem->setText( 1, QString::number( gc.z(), precision > 0 ? 'f' : 'g', qAbs( precision ) ) );
}
if ( const SMDS_BallElement* ball = dynamic_cast<const SMDS_BallElement*>( e )) {
// ball diameter
diamItem->setText( 1, QString( "%1" ).arg( afunctor->GetValue( id ) ) );
}
if( e->GetType() == SMDSAbs_Volume ) {
- //AspectRatio3D
+ //AspectRatio3D
afunctor.reset( new SMESH::Controls::AspectRatio3D() );
afunctor->SetMesh( actor()->GetObject()->GetMesh() );
QTreeWidgetItem* ratlItem3 = createItem( cntrItem, Bold );
QTreeWidgetItem* volItem = createItem( cntrItem, Bold );
volItem->setText( 0, tr( "VOLUME_3D_ELEMENTS" ) );
volItem->setText( 1, QString( "%1" ).arg( afunctor->GetValue( id ) ) );
- //ElementDiameter3D
+ //ElementDiameter3D
afunctor.reset( new SMESH::Controls::MaxElementLength3D() );
afunctor->SetMesh( actor()->GetObject()->GetMesh() );
QTreeWidgetItem* diam3Item = createItem( cntrItem, Bold );
diam3Item->setText( 0, tr( "MAX_ELEMENT_LENGTH_3D" ) );
diam3Item->setText( 1, QString( "%1" ).arg( afunctor->GetValue( id ) ) );
}
+
+ // gravity center
+ XYZ gc = gravityCenter( e );
+ QTreeWidgetItem* gcItem = createItem( elemItem, Bold );
+ gcItem->setText( 0, SMESHGUI_ElemInfo::tr( "GRAVITY_CENTER" ) );
+ QTreeWidgetItem* xItem = createItem( gcItem );
+ xItem->setText( 0, "X" );
+ xItem->setText( 1, QString::number( gc.x(), precision > 0 ? 'f' : 'g', qAbs( precision ) ) );
+ QTreeWidgetItem* yItem = createItem( gcItem );
+ yItem->setText( 0, "Y" );
+ yItem->setText( 1, QString::number( gc.y(), precision > 0 ? 'f' : 'g', qAbs( precision ) ) );
+ QTreeWidgetItem* zItem = createItem( gcItem );
+ zItem->setText( 0, "Z" );
+ zItem->setText( 1, QString::number( gc.z(), precision > 0 ? 'f' : 'g', qAbs( precision ) ) );
// element position
+ SMESH::SMESH_Mesh_ptr aMesh = actor()->GetObject()->GetMeshServer();
if ( e->GetType() >= SMDSAbs_Edge && e->GetType() <= SMDSAbs_Volume ) {
- SMESH::SMESH_Mesh_ptr aMesh = actor()->GetObject()->GetMeshServer();
if ( !CORBA::is_nil( aMesh ) ) {
SMESH::ElementPosition pos = aMesh->GetElementPosition( id );
int shapeID = pos.shapeID;
}
}
// groups element belongs to
- SMESH::SMESH_Mesh_ptr aMesh = actor()->GetObject()->GetMeshServer();
if ( !CORBA::is_nil( aMesh ) ) {
SMESH::ListOfGroups_var groups = aMesh->GetGroups();
QTreeWidgetItem* groupsItem = 0;
{
// type
GEOM::GEOM_Object_var shape = mesh->GetShapeToMesh();
- SALOME_MED::MedFileInfo* inf = mesh->GetMEDFileInfo();
+ SMESH::MedFileInfo_var inf = mesh->GetMEDFileInfo();
QTreeWidgetItem* typeItem = createItem( parent, Bold );
typeItem->setText( 0, tr( "TYPE" ) );
if ( !CORBA::is_nil( shape ) ) {
myAddInfo = new SMESHGUI_AddInfo( myTabWidget );
myTabWidget->addTab( myAddInfo, tr( "ADDITIONAL_INFO" ) );
+ // controls info
+
+ myCtrlInfo = new SMESHGUI_CtrlInfo( myTabWidget );
+ myTabWidget->addTab( myCtrlInfo, tr( "CTRL_INFO" ) );
+
// buttons
QPushButton* okBtn = new QPushButton( tr( "SMESH_BUT_OK" ), this );
if ( !CORBA::is_nil( obj ) ) {
myBaseInfo->showInfo( obj );
myAddInfo->showInfo( obj );
+ myCtrlInfo->showInfo( obj );
myActor = SMESH::FindActorByEntry( IO->getEntry() );
SVTK_Selector* selector = SMESH::GetViewWindow()->GetSelector();
disconnect( selMgr, 0, this, 0 );
selMgr->clearFilters();
- if ( myTabWidget->currentIndex() == BaseInfo || myTabWidget->currentIndex() == AddInfo ) {
+ if ( myTabWidget->currentIndex() == BaseInfo || myTabWidget->currentIndex() == AddInfo || myTabWidget->currentIndex() == CtrlInfo ) {
SMESH::SetPointRepresentation( false );
if ( SVTK_ViewWindow* aViewWindow = SMESH::GetViewWindow() )
aViewWindow->SetSelectionMode( ActorSelection );
bool anIsBase = true;
bool anIsElem = true;
bool anIsAdd = true;
+ bool anIsCtrl = true;
if ( SUIT_ResourceMgr* aResourceMgr = SMESHGUI::resourceMgr() ) {
anIsBase = aResourceMgr->booleanValue( "SMESH", "info_dump_base", anIsBase );
anIsElem = aResourceMgr->booleanValue( "SMESH", "info_dump_elem", anIsElem );
anIsAdd = aResourceMgr->booleanValue( "SMESH", "info_dump_add", anIsAdd );
+ anIsCtrl = aResourceMgr->booleanValue( "SMESH", "info_dump_ctrl", anIsCtrl );
}
DumpFileDlg fd( this );
fd.myBaseChk->setChecked( anIsBase );
fd.myElemChk->setChecked( anIsElem );
fd.myAddChk ->setChecked( anIsAdd );
+ fd.myCtrlChk->setChecked( anIsCtrl );
if ( fd.exec() == QDialog::Accepted )
{
QString aFileName = fd.selectedFile();
bool toBase = fd.myBaseChk->isChecked();
bool toElem = fd.myElemChk->isChecked();
bool toAdd = fd.myAddChk->isChecked();
+ bool toCtrl = fd.myCtrlChk->isChecked();
if ( !aFileName.isEmpty() ) {
QFileInfo aFileInfo( aFileName );
if ( toBase ) myBaseInfo->saveInfo( out );
if ( toElem ) myElemInfo->saveInfo( out );
if ( toAdd ) myAddInfo ->saveInfo( out );
+ if ( toCtrl ) myCtrlInfo->saveInfo( out );
}
}
}
+
+/*!
+ \class SMESHGUI_CtrlInfo
+ \brief Class for the mesh controls information widget.
+*/
+
+/*!
+ \brief Constructor
+ \param parent parent widget
+*/
+SMESHGUI_CtrlInfo::SMESHGUI_CtrlInfo( QWidget* parent )
+ : QFrame( parent ), myPlot( 0 ), myPlot3D( 0 )
+{
+ setFrameStyle( StyledPanel | Sunken );
+
+ myMainLayout = new QGridLayout( this );
+ myMainLayout->setMargin( MARGIN );
+ myMainLayout->setSpacing( SPACING );
+
+ // name
+ QLabel* aNameLab = new QLabel( tr( "NAME_LAB" ), this );
+ QLabel* aName = createField();
+ aName->setMinimumWidth( 150 );
+ myWidgets << aName;
+
+ SUIT_ResourceMgr* aResMgr = SUIT_Session::session()->resourceMgr();
+ QIcon aComputeIcon( aResMgr->loadPixmap( "SMESH", tr( "ICON_COMPUTE" ) ) );
+
+ SMESH::FilterManager_var aFilterMgr = SMESH::GetFilterManager();
+
+ // nodes info
+ QLabel* aNodesLab = new QLabel( tr( "NODES_INFO" ), this );
+ QLabel* aNodesFreeLab = new QLabel( tr( "NUMBER_OF_THE_FREE_NODES" ), this );
+ QLabel* aNodesFree = createField();
+ myWidgets << aNodesFree;
+ myPredicates << aFilterMgr->CreateFreeNodes();
+ //
+ QLabel* aNodesDoubleLab = new QLabel( tr( "NUMBER_OF_THE_DOUBLE_NODES" ), this );
+ QLabel* aNodesDouble = createField();
+ myWidgets << aNodesDouble;
+ myPredicates << aFilterMgr->CreateEqualNodes();
+ QLabel* aToleranceLab = new QLabel( tr( "DOUBLE_NODES_TOLERANCE" ), this );
+ myToleranceWidget = new SMESHGUI_SpinBox( this );
+ myToleranceWidget->RangeStepAndValidator(0.0000000001, 1000000.0, 0.0000001, "length_precision" );
+ myToleranceWidget->setAcceptNames( false );
+ myToleranceWidget->SetValue( SMESHGUI::resourceMgr()->doubleValue( "SMESH", "equal_nodes_tolerance", 1e-7 ) );
+
+ // edges info
+ QLabel* anEdgesLab = new QLabel( tr( "EDGES_INFO" ), this );
+ QLabel* anEdgesDoubleLab = new QLabel( tr( "NUMBER_OF_THE_DOUBLE_EDGES" ), this );
+ QLabel* anEdgesDouble = createField();
+ myWidgets << anEdgesDouble;
+ myPredicates << aFilterMgr->CreateEqualEdges();
+
+ // faces info
+ QLabel* aFacesLab = new QLabel( tr( "FACES_INFO" ), this );
+ QLabel* aFacesDoubleLab = new QLabel( tr( "NUMBER_OF_THE_DOUBLE_FACES" ), this );
+ QLabel* aFacesDouble = createField();
+ myWidgets << aFacesDouble;
+ myPredicates << aFilterMgr->CreateEqualFaces();
+ QLabel* aFacesOverLab = new QLabel( tr( "NUMBER_OF_THE_OVER_CONSTRAINED" ), this );
+ QLabel* aFacesOver = createField();
+ myWidgets << aFacesOver;
+ myPredicates << aFilterMgr->CreateOverConstrainedFace();
+ QLabel* anAspectRatioLab = new QLabel( tr( "ASPECT_RATIO_HISTOGRAM" ), this );
+ myPlot = createPlot( this );
+ myAspectRatio = aFilterMgr->CreateAspectRatio();
+
+ // volumes info
+ QLabel* aVolumesLab = new QLabel( tr( "VOLUMES_INFO" ), this );
+ QLabel* aVolumesDoubleLab = new QLabel( tr( "NUMBER_OF_THE_DOUBLE_VOLUMES" ), this );
+ QLabel* aVolumesDouble = createField();
+ myWidgets << aVolumesDouble;
+ myPredicates << aFilterMgr->CreateEqualVolumes();
+ QLabel* aVolumesOverLab = new QLabel( tr( "NUMBER_OF_THE_OVER_CONSTRAINED" ), this );
+ QLabel* aVolumesOver = createField();
+ myWidgets << aVolumesOver;
+ myPredicates << aFilterMgr->CreateOverConstrainedVolume();
+ QLabel* anAspectRatio3DLab = new QLabel( tr( "ASPECT_RATIO_3D_HISTOGRAM" ), this );
+ myPlot3D = createPlot( this );
+ myAspectRatio3D = aFilterMgr->CreateAspectRatio3D();
+
+ QToolButton* aFreeNodesBtn = new QToolButton( this );
+ aFreeNodesBtn->setIcon(aComputeIcon);
+ myButtons << aFreeNodesBtn; //0
+
+ QToolButton* aDoubleNodesBtn = new QToolButton( this );
+ aDoubleNodesBtn->setIcon(aComputeIcon);
+ myButtons << aDoubleNodesBtn; //1
+
+ QToolButton* aDoubleEdgesBtn = new QToolButton( this );
+ aDoubleEdgesBtn->setIcon(aComputeIcon);
+ myButtons << aDoubleEdgesBtn; //2
+
+ QToolButton* aDoubleFacesBtn = new QToolButton( this );
+ aDoubleFacesBtn->setIcon(aComputeIcon);
+ myButtons << aDoubleFacesBtn; //3
+
+ QToolButton* aOverContFacesBtn = new QToolButton( this );
+ aOverContFacesBtn->setIcon(aComputeIcon);
+ myButtons << aOverContFacesBtn; //4
+
+ QToolButton* aComputeFaceBtn = new QToolButton( this );
+ aComputeFaceBtn->setIcon(aComputeIcon);
+ myButtons << aComputeFaceBtn; //5
+
+ QToolButton* aDoubleVolumesBtn = new QToolButton( this );
+ aDoubleVolumesBtn->setIcon(aComputeIcon);
+ myButtons << aDoubleVolumesBtn; //6
+
+ QToolButton* aOverContVolumesBtn = new QToolButton( this );
+ aOverContVolumesBtn->setIcon(aComputeIcon);
+ myButtons << aOverContVolumesBtn; //7
+
+ QToolButton* aComputeVolumeBtn = new QToolButton( this );
+ aComputeVolumeBtn->setIcon(aComputeIcon);
+ myButtons << aComputeVolumeBtn; //8
+
+ connect( aComputeFaceBtn, SIGNAL( clicked() ), this, SLOT( computeAspectRatio() ) );
+ connect( aComputeVolumeBtn, SIGNAL( clicked() ), this, SLOT( computeAspectRatio3D() ) );
+ connect( aFreeNodesBtn, SIGNAL( clicked() ), this, SLOT( computeFreeNodesInfo() ) );
+ connect( aDoubleNodesBtn, SIGNAL( clicked() ), this, SLOT( computeDoubleNodesInfo() ) );
+ connect( aDoubleEdgesBtn, SIGNAL( clicked() ), this, SLOT( computeDoubleEdgesInfo() ) );
+ connect( aDoubleFacesBtn, SIGNAL( clicked() ), this, SLOT( computeDoubleFacesInfo() ) );
+ connect( aOverContFacesBtn, SIGNAL( clicked() ), this, SLOT( computeOverConstrainedFacesInfo() ) );
+ connect( aDoubleVolumesBtn, SIGNAL( clicked() ), this, SLOT( computeDoubleVolumesInfo() ) );
+ connect( aOverContVolumesBtn, SIGNAL( clicked() ), this, SLOT( computeOverConstrainedVolumesInfo() ) );
+ connect( myToleranceWidget, SIGNAL(valueChanged(double)), this, SLOT( setTolerance( double )));
+
+ setFontAttributes( aNameLab );
+ setFontAttributes( aNodesLab );
+ setFontAttributes( anEdgesLab );
+ setFontAttributes( aFacesLab );
+ setFontAttributes( aVolumesLab );
+
+ myMainLayout->addWidget( aNameLab, 0, 0 ); //0
+ myMainLayout->addWidget( aName, 0, 1, 1, 2 ); //1
+ myMainLayout->addWidget( aNodesLab, 1, 0, 1, 3 ); //2
+ myMainLayout->addWidget( aNodesFreeLab, 2, 0 ); //3
+ myMainLayout->addWidget( aNodesFree, 2, 1 ); //4
+ myMainLayout->addWidget( aFreeNodesBtn, 2, 2 ); //5
+ myMainLayout->addWidget( aNodesDoubleLab, 3, 0 ); //6
+ myMainLayout->addWidget( aNodesDouble, 3, 1 ); //7
+ myMainLayout->addWidget( aDoubleNodesBtn, 3, 2 ); //8
+ myMainLayout->addWidget( aToleranceLab, 4, 0 ); //9
+ myMainLayout->addWidget( myToleranceWidget, 4, 1 ); //10
+ myMainLayout->addWidget( anEdgesLab, 5, 0, 1, 3 ); //11
+ myMainLayout->addWidget( anEdgesDoubleLab, 6, 0 ); //12
+ myMainLayout->addWidget( anEdgesDouble, 6, 1 ); //13
+ myMainLayout->addWidget( aDoubleEdgesBtn, 6, 2 ); //14
+ myMainLayout->addWidget( aFacesLab, 7, 0, 1, 3 ); //15
+ myMainLayout->addWidget( aFacesDoubleLab, 8, 0 ); //16
+ myMainLayout->addWidget( aFacesDouble, 8, 1 ); //17
+ myMainLayout->addWidget( aDoubleFacesBtn, 8, 2 ); //18
+ myMainLayout->addWidget( aFacesOverLab, 9, 0 ); //19
+ myMainLayout->addWidget( aFacesOver, 9, 1 ); //20
+ myMainLayout->addWidget( aOverContFacesBtn, 9, 2 ); //21
+ myMainLayout->addWidget( anAspectRatioLab, 10, 0 ); //22
+ myMainLayout->addWidget( aComputeFaceBtn, 10, 2 ); //23
+ myMainLayout->addWidget( myPlot, 11, 0, 1, 3 );//24
+ myMainLayout->addWidget( aVolumesLab, 12, 0, 1, 3 );//25
+ myMainLayout->addWidget( aVolumesDoubleLab, 13, 0 ); //26
+ myMainLayout->addWidget( aVolumesDouble, 13, 1 ); //27
+ myMainLayout->addWidget( aDoubleVolumesBtn, 13, 2 ); //28
+ myMainLayout->addWidget( aVolumesOverLab, 14, 0 ); //28
+ myMainLayout->addWidget( aVolumesOver, 14, 1 ); //30
+ myMainLayout->addWidget( aOverContVolumesBtn,14, 2 ); //31
+ myMainLayout->addWidget( anAspectRatio3DLab, 15, 0 ); //32
+ myMainLayout->addWidget( aComputeVolumeBtn, 15, 2 ); //33
+ myMainLayout->addWidget( myPlot3D, 16, 0, 1, 3 );//34
+
+ myMainLayout->setColumnStretch( 0, 0 );
+ myMainLayout->setColumnStretch( 1, 5 );
+ myMainLayout->setRowStretch ( 11, 5 );
+ myMainLayout->setRowStretch ( 16, 5 );
+ myMainLayout->setRowStretch ( 17, 1 );
+
+ clearInternal();
+}
+
+/*!
+ \brief Destructor
+*/
+SMESHGUI_CtrlInfo::~SMESHGUI_CtrlInfo()
+{}
+
+/*!
+ \brief Change widget font attributes (bold, ...).
+ \param w widget
+ \param attr font attributes (XORed flags)
+*/
+void SMESHGUI_CtrlInfo::setFontAttributes( QWidget* w )
+{
+ if ( w ) {
+ QFont f = w->font();
+ f.setBold( true );
+ w->setFont( f );
+ }
+}
+
+/*!
+ \brief Create info field
+ \return new info field
+*/
+QLabel* SMESHGUI_CtrlInfo::createField()
+{
+ QLabel* lab = new QLabel( this );
+ lab->setFrameStyle( StyledPanel | Sunken );
+ lab->setAlignment( Qt::AlignCenter );
+ lab->setAutoFillBackground( true );
+ QPalette pal = lab->palette();
+ pal.setColor( QPalette::Window, QApplication::palette().color( QPalette::Active, QPalette::Base ) );
+ lab->setPalette( pal );
+ lab->setMinimumWidth( 60 );
+ return lab;
+}
+
+/*!
+ \brief Create QwtPlot
+ \return new QwtPlot
+*/
+QwtPlot* SMESHGUI_CtrlInfo::createPlot( QWidget* parent )
+{
+ QwtPlot* aPlot = new QwtPlot( parent );
+ aPlot->setMinimumSize( 100, 100 );
+ QFont xFont = aPlot->axisFont( QwtPlot::xBottom );
+ xFont.setPointSize( 5 );
+ QFont yFont = aPlot->axisFont( QwtPlot::yLeft );
+ yFont.setPointSize( 5 );
+ aPlot->setAxisFont( QwtPlot::xBottom, xFont );
+ aPlot->setAxisFont( QwtPlot::yLeft, yFont );
+ aPlot->replot();
+ return aPlot;
+}
+
+/*!
+ \brief Show controls information on the selected object
+*/
+void SMESHGUI_CtrlInfo::showInfo( SMESH::SMESH_IDSource_ptr obj )
+{
+ clearInternal();
+
+ myObject = SMESH::SMESH_IDSource::_duplicate( obj );
+ if ( myObject->_is_nil() ) return;
+
+ if ( _PTR(SObject) aSO = SMESH::FindSObject( obj ))
+ myWidgets[0]->setText( aSO->GetName().c_str() );
+
+ SMESH::SMESH_Mesh_var mesh = obj->GetMesh();
+ if ( mesh->_is_nil() ) return;
+
+ const bool meshLoaded = mesh->IsLoaded();
+ if ( !meshLoaded ) // mesh not yet loaded from the hdf file
+ // enable Compute buttons, just in case obj->GetNbElementsByType() fails
+ for ( int i = 0; i < myButtons.count(); ++i )
+ myButtons[i]->setEnabled( true );
+
+ SMESH::long_array_var nbElemsByType = obj->GetNbElementsByType();
+ if ( ! &nbElemsByType.in() ) return;
+
+ const CORBA::Long ctrlLimit =
+ meshLoaded ? SMESHGUI::resourceMgr()->integerValue( "SMESH", "info_controls_limit", 3000 ) : -1;
+
+ // nodes info
+ const CORBA::Long nbNodes = nbElemsByType[ SMESH::NODE ];
+ const CORBA::Long nbElems = ( nbElemsByType[ SMESH::EDGE ] +
+ nbElemsByType[ SMESH::FACE ] +
+ nbElemsByType[ SMESH::VOLUME ] );
+ if ( nbNodes + nbElems > 0 ) {
+ if ( Max( (int)nbNodes, (int)nbElems ) <= ctrlLimit ) {
+ // free nodes
+ computeFreeNodesInfo();
+ // double nodes
+ computeDoubleNodesInfo();
+ }
+ else {
+ myButtons[0]->setEnabled( true );
+ myButtons[1]->setEnabled( true );
+ }
+ }
+ else {
+ for( int i=2; i<=10; i++)
+ myMainLayout->itemAt(i)->widget()->setVisible( false );
+ }
+
+ // edges info
+ if ( nbElemsByType[ SMESH::EDGE ] > 0 ) {
+ // double edges
+ if( nbElemsByType[ SMESH::EDGE ] <= ctrlLimit )
+ computeDoubleEdgesInfo();
+ else
+ myButtons[2]->setEnabled( true );
+ }
+ else {
+ for( int i=11; i<=14; i++)
+ myMainLayout->itemAt(i)->widget()->setVisible( false );
+ }
+
+ // faces info
+ if ( nbElemsByType[ SMESH::FACE ] > 0 ) {
+ if ( nbElemsByType[ SMESH::FACE ] <= ctrlLimit ) {
+ // double faces
+ computeDoubleFacesInfo();
+ // over constrained faces
+ computeOverConstrainedFacesInfo();
+ // aspect Ratio histogram
+ computeAspectRatio();
+ }
+ else {
+ myButtons[3]->setEnabled( true );
+ myButtons[4]->setEnabled( true );
+ myButtons[5]->setEnabled( true );
+ }
+ }
+ else {
+ myMainLayout->setRowStretch(11,0);
+ for( int i=15; i<=24; i++)
+ myMainLayout->itemAt(i)->widget()->setVisible( false );
+ }
+
+ // volumes info
+ if ( nbElemsByType[ SMESH::VOLUME ] > 0 ) {
+ if ( nbElemsByType[ SMESH::VOLUME ] <= ctrlLimit ) {
+ // double volumes
+ computeDoubleVolumesInfo();
+ // over constrained volumes
+ computeOverConstrainedVolumesInfo();
+ // aspect Ratio 3D histogram
+ computeAspectRatio3D();
+ }
+ else {
+ myButtons[6]->setEnabled( true );
+ myButtons[7]->setEnabled( true );
+ myButtons[8]->setEnabled( true );
+ }
+ }
+ else {
+ myMainLayout->setRowStretch(16,0);
+ for( int i=25; i<=34; i++)
+ myMainLayout->itemAt(i)->widget()->setVisible( false );
+ }
+}
+
+//================================================================================
+/*!
+ * \brief Computes and shows nb of elements satisfying a given predicate
+ * \param [in] ft - a predicate type (SMESH::FunctorType)
+ * \param [in] iBut - index of one of myButtons to disable
+ * \param [in] iWdg - index of one of myWidgets to show the computed number
+ */
+//================================================================================
+
+void SMESHGUI_CtrlInfo::computeNb( int ft, int iBut, int iWdg )
+{
+ myButtons[ iBut ]->setEnabled( false );
+ myWidgets[ iWdg ]->setText( "" );
+ if ( myObject->_is_nil() ) return;
+
+ SUIT_OverrideCursor wc;
+
+ SMESH::SMESH_Mesh_var mesh = myObject->GetMesh();
+ if ( !mesh->_is_nil() && !mesh->IsLoaded() )
+ {
+ mesh->Load();
+ this->showInfo( myObject ); // try to show all values
+ if ( !myWidgets[ iWdg ]->text().isEmpty() )
+ return; // <ft> predicate already computed
+ }
+ // look for a predicate of type <ft>
+ for ( int i = 0; i < myPredicates.count(); ++i )
+ if ( myPredicates[i]->GetFunctorType() == ft )
+ {
+ CORBA::Long nb = myPredicates[i]->NbSatisfying( myObject );
+ myWidgets[ iWdg ]->setText( QString::number( nb ));
+ }
+}
+
+void SMESHGUI_CtrlInfo::computeFreeNodesInfo()
+{
+ computeNb( SMESH::FT_FreeNodes, 0, 1 );
+}
+
+void SMESHGUI_CtrlInfo::computeDoubleNodesInfo()
+{
+ computeNb( SMESH::FT_EqualNodes, 1, 2 );
+}
+
+void SMESHGUI_CtrlInfo::computeDoubleEdgesInfo()
+{
+ computeNb( SMESH::FT_EqualEdges, 2, 3 );
+}
+
+void SMESHGUI_CtrlInfo::computeDoubleFacesInfo()
+{
+ computeNb( SMESH::FT_EqualFaces, 3, 4 );
+}
+
+void SMESHGUI_CtrlInfo::computeOverConstrainedFacesInfo()
+{
+ computeNb( SMESH::FT_OverConstrainedFace, 4, 5 );
+}
+
+void SMESHGUI_CtrlInfo::computeDoubleVolumesInfo()
+{
+ computeNb( SMESH::FT_EqualVolumes, 6, 6 );
+}
+
+void SMESHGUI_CtrlInfo::computeOverConstrainedVolumesInfo()
+{
+ computeNb( SMESH::FT_OverConstrainedVolume, 7, 7 );
+}
+
+void SMESHGUI_CtrlInfo::computeAspectRatio()
+{
+ myButtons[5]->setEnabled( false );
+
+ if ( myObject->_is_nil() ) return;
+
+ SUIT_OverrideCursor wc;
+
+ Plot2d_Histogram* aHistogram = getHistogram( myAspectRatio );
+ if ( aHistogram && !aHistogram->isEmpty() ) {
+ QwtPlotItem* anItem = aHistogram->createPlotItem();
+ anItem->attach( myPlot );
+ myPlot->replot();
+ }
+ delete aHistogram;
+}
+
+void SMESHGUI_CtrlInfo::computeAspectRatio3D()
+{
+ myButtons[8]->setEnabled( false );
+
+ if ( myObject->_is_nil() ) return;
+
+ SUIT_OverrideCursor wc;
+
+ Plot2d_Histogram* aHistogram = getHistogram( myAspectRatio3D );
+ if ( aHistogram && !aHistogram->isEmpty() ) {
+ QwtPlotItem* anItem = aHistogram->createPlotItem();
+ anItem->attach( myPlot3D );
+ myPlot3D->replot();
+ }
+ delete aHistogram;
+}
+
+/*!
+ \brief Internal clean-up (reset widget)
+*/
+void SMESHGUI_CtrlInfo::clearInternal()
+{
+ for( int i=0; i<=34; i++)
+ myMainLayout->itemAt(i)->widget()->setVisible( true );
+ for( int i=0; i<=8; i++)
+ myButtons[i]->setEnabled( false );
+ myPlot->detachItems();
+ myPlot3D->detachItems();
+ myPlot->replot();
+ myPlot3D->replot();
+ myWidgets[0]->setText( QString() );
+ for ( int i = 1; i < myWidgets.count(); i++ )
+ myWidgets[i]->setText( "" );
+ myMainLayout->setRowStretch(11,5);
+ myMainLayout->setRowStretch(16,5);
+}
+
+void SMESHGUI_CtrlInfo::setTolerance( double theTolerance )
+{
+ //SMESH::long_array_var anElems = getElementsByType( SMESH::NODE );
+ myButtons[1]->setEnabled( true );
+ myWidgets[2]->setText("");
+}
+
+Plot2d_Histogram* SMESHGUI_CtrlInfo::getHistogram( SMESH::NumericalFunctor_ptr aNumFun )
+{
+ SMESH::SMESH_Mesh_var mesh = myObject->GetMesh();
+ if ( mesh->_is_nil() ) return 0;
+ if ( !mesh->IsLoaded() )
+ mesh->Load();
+ aNumFun->SetMesh( mesh );
+
+ CORBA::Long cprecision = 6;
+ if ( SMESHGUI::resourceMgr()->booleanValue( "SMESH", "use_precision", false ) )
+ cprecision = SMESHGUI::resourceMgr()->integerValue( "SMESH", "controls_precision", -1 );
+ aNumFun->SetPrecision( cprecision );
+
+ int nbIntervals = SMESHGUI::resourceMgr()->integerValue( "SMESH", "scalar_bar_num_colors", false );
+
+ SMESH::Histogram_var histogramVar = aNumFun->GetLocalHistogram( nbIntervals,
+ /*isLogarithmic=*/false,
+ myObject );
+ Plot2d_Histogram* aHistogram = new Plot2d_Histogram();
+ aHistogram->setColor( palette().color( QPalette::Highlight ) );
+ if ( &histogramVar.in() )
+ {
+ for ( size_t i = 0, nb = histogramVar->length(); i < nb; i++ )
+ aHistogram->addPoint( 0.5 * ( histogramVar[i].min + histogramVar[i].max ), histogramVar[i].nbEvents );
+ if ( histogramVar->length() >= 2 )
+ aHistogram->setWidth( ( histogramVar[0].max - histogramVar[0].min ) * 0.8 );
+ }
+ return aHistogram;
+}
+
+void SMESHGUI_CtrlInfo::saveInfo( QTextStream &out ) {
+ out << QString( 20, '-' ) << "\n";
+ out << tr( "CTRL_INFO" ) << "\n";
+ out << QString( 20, '-' ) << "\n";
+ out << tr( "NAME_LAB" ) << " " << myWidgets[0]->text() << "\n";
+ out << tr( "NODES_INFO" ) << "\n";
+ out << QString( SPACING_INFO, ' ' ) << tr( "NUMBER_OF_THE_FREE_NODES" ) << ": " << myWidgets[1]->text() << "\n";
+ out << QString( SPACING_INFO, ' ' ) << tr( "NUMBER_OF_THE_DOUBLE_NODES" ) << ": " << myWidgets[2]->text() << "\n";
+ out << tr( "EDGES_INFO" ) << "\n";
+ out << QString( SPACING_INFO, ' ' ) << tr( "NUMBER_OF_THE_DOUBLE_EDGES" ) << ": " << myWidgets[3]->text() << "\n";
+ out << tr( "FACES_INFO" ) << "\n";
+ out << QString( SPACING_INFO, ' ' ) << tr( "NUMBER_OF_THE_DOUBLE_FACES" ) << ": " << myWidgets[4]->text() << "\n";
+ out << QString( SPACING_INFO, ' ' ) << tr( "NUMBER_OF_THE_OVER_CONSTRAINED" ) << ": " << myWidgets[5]->text() << "\n";
+ out << tr( "VOLUMES_INFO" ) << "\n";
+ out << QString( SPACING_INFO, ' ' ) << tr( "NUMBER_OF_THE_DOUBLE_VOLUMES" ) << ": " << myWidgets[6]->text() << "\n";
+ out << QString( SPACING_INFO, ' ' ) << tr( "NUMBER_OF_THE_OVER_CONSTRAINED" ) << ": " << myWidgets[7]->text() << "\n";
+}
+
+/*!
+ \class SMESHGUI_CtrlInfoDlg
+ \brief Controls information dialog box
+*/
+
+/*!
+ \brief Constructor
+ \param parent parent widget
+ \param page specifies the dialog page to be shown at the start-up
+*/
+SMESHGUI_CtrlInfoDlg::SMESHGUI_CtrlInfoDlg( QWidget* parent )
+: QDialog( parent )
+{
+ setAttribute( Qt::WA_DeleteOnClose, true );
+ setWindowTitle( tr( "CTRL_INFO" ) );
+ setMinimumSize( 400, 600 );
+
+ myCtrlInfo = new SMESHGUI_CtrlInfo( this );
+
+ // buttons
+ QPushButton* okBtn = new QPushButton( tr( "SMESH_BUT_OK" ), this );
+ okBtn->setAutoDefault( true );
+ okBtn->setDefault( true );
+ okBtn->setFocus();
+ QPushButton* dumpBtn = new QPushButton( tr( "BUT_DUMP_MESH" ), this );
+ dumpBtn->setAutoDefault( true );
+ QPushButton* helpBtn = new QPushButton( tr( "SMESH_BUT_HELP" ), this );
+ helpBtn->setAutoDefault( true );
+
+ QHBoxLayout* btnLayout = new QHBoxLayout;
+ btnLayout->setSpacing( SPACING );
+ btnLayout->setMargin( 0 );
+
+ btnLayout->addWidget( okBtn );
+ btnLayout->addWidget( dumpBtn );
+ btnLayout->addStretch( 10 );
+ btnLayout->addWidget( helpBtn );
+
+ QVBoxLayout* l = new QVBoxLayout ( this );
+ l->setMargin( MARGIN );
+ l->setSpacing( SPACING );
+ l->addWidget( myCtrlInfo );
+ l->addLayout( btnLayout );
+
+ connect( okBtn, SIGNAL( clicked() ), this, SLOT( reject() ) );
+ connect( dumpBtn, SIGNAL( clicked() ), this, SLOT( dump() ) );
+ connect( helpBtn, SIGNAL( clicked() ), this, SLOT( help() ) );
+ connect( SMESHGUI::GetSMESHGUI(), SIGNAL( SignalDeactivateActiveDialog() ), this, SLOT( deactivate() ) );
+ connect( SMESHGUI::GetSMESHGUI(), SIGNAL( SignalCloseAllDialogs() ), this, SLOT( reject() ) );
+
+ updateSelection();
+}
+
+/*!
+ \brief Destructor
+*/
+SMESHGUI_CtrlInfoDlg::~SMESHGUI_CtrlInfoDlg()
+{
+}
+
+/*!
+ \brief Show controls information
+ \param IO interactive object
+*/
+void SMESHGUI_CtrlInfoDlg::showInfo( const Handle(SALOME_InteractiveObject)& IO )
+{
+ if ( SMESH::SMESH_IDSource_var obj = SMESH::IObjectToInterface<SMESH::SMESH_IDSource>( IO ) )
+ myCtrlInfo->showInfo( obj );
+}
+
+/*!
+ \brief Perform clean-up actions on the dialog box closing.
+*/
+void SMESHGUI_CtrlInfoDlg::reject()
+{
+ SMESH::SetPointRepresentation( false );
+ QDialog::reject();
+}
+
+/*!
+ \brief Setup selection mode depending on the current dialog box state.
+*/
+void SMESHGUI_CtrlInfoDlg::updateSelection()
+{
+ LightApp_SelectionMgr* selMgr = SMESHGUI::selectionMgr();
+ disconnect( selMgr, 0, this, 0 );
+ SMESH::SetPointRepresentation( false );
+ connect( selMgr, SIGNAL( currentSelectionChanged() ), this, SLOT( updateInfo() ) );
+ updateInfo();
+}
+
+/*!
+ \brief Show mesh information
+*/
+void SMESHGUI_CtrlInfoDlg::updateInfo()
+{
+ SUIT_OverrideCursor wc;
+
+ SALOME_ListIO selected;
+ SMESHGUI::selectionMgr()->selectedObjects( selected );
+
+ if ( selected.Extent() == 1 ) {
+ Handle(SALOME_InteractiveObject) IO = selected.First();
+ showInfo( IO );
+ }
+}
+
+/*!
+ \brief Activate dialog box
+*/
+void SMESHGUI_CtrlInfoDlg::activate()
+{
+ SMESHGUI::GetSMESHGUI()->EmitSignalDeactivateDialog();
+ SMESHGUI::GetSMESHGUI()->SetActiveDialogBox( this );
+ updateSelection();
+}
+
+/*!
+ \brief Deactivate dialog box
+*/
+void SMESHGUI_CtrlInfoDlg::deactivate()
+{
+ disconnect( SMESHGUI::selectionMgr(), SIGNAL( currentSelectionChanged() ), this, SLOT( updateInfo() ) );
+}
+
+/*!
+ * \brief Dump contents into a file
+ */
+void SMESHGUI_CtrlInfoDlg::dump()
+{
+ SUIT_Application* app = SUIT_Session::session()->activeApplication();
+ if ( !app ) return;
+ SalomeApp_Study* appStudy = dynamic_cast<SalomeApp_Study *>( app->activeStudy() );
+ if ( !appStudy ) return;
+ _PTR( Study ) aStudy = appStudy->studyDS();
+
+ QStringList aFilters;
+ aFilters.append( tr( "TEXT_FILES" ) );
+
+ DumpFileDlg fd( this );
+ fd.setWindowTitle( tr( "SAVE_INFO" ) );
+ fd.setFilters( aFilters );
+ fd.myBaseChk->hide();
+ fd.myElemChk->hide();
+ fd.myAddChk ->hide();
+ fd.myCtrlChk->hide();
+ if ( fd.exec() == QDialog::Accepted )
+ {
+ QString aFileName = fd.selectedFile();
+ if ( !aFileName.isEmpty() ) {
+ QFileInfo aFileInfo( aFileName );
+ if ( aFileInfo.isDir() )
+ return;
+
+ QFile aFile( aFileName );
+ if ( !aFile.open( QIODevice::WriteOnly | QIODevice::Text ) )
+ return;
+
+ QTextStream out( &aFile );
+ myCtrlInfo->saveInfo( out );
+ }
+ }
+}
+
+/*!
+ * \brief Show help
+ */
+void SMESHGUI_CtrlInfoDlg::help()
+{
+ SMESH::ShowHelpFile("mesh_infos_page.html#mesh_quality_info_anchor");
+}
