-// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE
//
-// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License.
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
-// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
// SMESH SMESHGUI : GUI for SMESH component
#include "SMESHGUI_SpinBox.h"
#include "SMESHGUI_IdValidator.h"
#include "SMESHGUI_FilterDlg.h"
+#include "SMESHGUI_MeshEditPreview.h"
#include <SMESH_Actor.h>
#include <SMESH_TypeFilter.hxx>
// purpose : constructor
//=================================================================================
SMESHGUI_ExtrusionDlg::SMESHGUI_ExtrusionDlg (SMESHGUI* theModule)
- : QDialog( SMESH::GetDesktop( theModule ) ),
- mySMESHGUI( theModule ),
+ : SMESHGUI_PreviewDlg( theModule ),
mySelectionMgr( SMESH::GetSelectionMgr( theModule ) ),
myFilterDlg( 0 ),
mySelectedObject(SMESH::SMESH_IDSource::_nil())
LineEditElements = new QLineEdit(GroupArguments);
LineEditElements->setValidator(myIdValidator);
+ LineEditElements->setMaxLength(-1);
myFilterBtn = new QPushButton( tr( "SMESH_BUT_FILTER" ), GroupArguments );
connect(myFilterBtn, SIGNAL(clicked()), this, SLOT(setFilters()));
// CheckBox for groups generation
MakeGroupsCheck = new QCheckBox(tr("SMESH_MAKE_GROUPS"), GroupArguments);
+ //Preview check box
+ myPreviewCheckBox = new QCheckBox(tr("PREVIEW"), GroupArguments);
+
GroupArgumentsLayout->addWidget(TextLabelElements, 0, 0);
GroupArgumentsLayout->addWidget(SelectElementsButton, 0, 1);
GroupArgumentsLayout->addWidget(LineEditElements, 0, 2, 1, 5);
GroupArgumentsLayout->addWidget(SpinBox_VDist, 5, 3);
GroupArgumentsLayout->addWidget(TextLabelNbSteps, 6, 0, 1, 3);
GroupArgumentsLayout->addWidget(SpinBox_NbSteps, 6, 3);
- GroupArgumentsLayout->addWidget(MakeGroupsCheck, 7, 0, 1, 8);
+ GroupArgumentsLayout->addWidget(myPreviewCheckBox, 7, 0, 1, 8);
+ GroupArgumentsLayout->addWidget(MakeGroupsCheck, 8, 0, 1, 8);
GroupArgumentsLayout->addItem(new QSpacerItem(0, 0, QSizePolicy::Minimum, QSizePolicy::Expanding), 8, 0);
connect(LineEditElements, SIGNAL(textChanged(const QString&)), SLOT(onTextChange(const QString&)));
connect(CheckBoxMesh, SIGNAL(toggled(bool)), SLOT(onSelectMesh(bool)));
+ connect(SpinBox_Dx, SIGNAL(valueChanged(double)), this, SLOT(toDisplaySimulation()));
+ connect(SpinBox_Dy, SIGNAL(valueChanged(double)), this, SLOT(toDisplaySimulation()));
+ connect(SpinBox_Dz, SIGNAL(valueChanged(double)), this, SLOT(toDisplaySimulation()));
+ connect(SpinBox_Vx, SIGNAL(valueChanged(double)), this, SLOT(toDisplaySimulation()));
+ connect(SpinBox_Vy, SIGNAL(valueChanged(double)), this, SLOT(toDisplaySimulation()));
+ connect(SpinBox_Vz, SIGNAL(valueChanged(double)), this, SLOT(toDisplaySimulation()));
+ connect(SpinBox_VDist, SIGNAL(valueChanged(double)), this, SLOT(toDisplaySimulation()));
+ connect(SpinBox_NbSteps, SIGNAL(valueChanged(int)), this, SLOT(toDisplaySimulation()));
+
+ //To Connect preview check box
+ connectPreviewControl();
+
/***************************************************************/
ConstructorsClicked(0);
CheckBoxMesh->setChecked(false);
onSelectMesh(false);
+ myPreviewCheckBox->setChecked(false);
+ onDisplaySimulation(false);
}
CheckIsEnable();
// purpose : Check whether the Ok and Apply buttons should be enabled or not
//=================================================================================
void SMESHGUI_ExtrusionDlg::CheckIsEnable()
-{
- double aX, aY, aZ, aModule;
+{
+ bool anIsEnable = myNbOkElements > 0 && isValuesValid();
+
+ buttonOk->setEnabled(anIsEnable);
+ buttonApply->setEnabled(anIsEnable);
+}
+
+//=================================================================================
+// function : isValuesValid()
+// purpose : Return true in case if values entered into dialog are valid
+//=================================================================================
+bool SMESHGUI_ExtrusionDlg::isValuesValid() {
+ double aX, aY, aZ, aModule = 0;
if ( RadioButton3->isChecked() ) {
aX = SpinBox_Dx->GetValue();
aY = SpinBox_Dy->GetValue();
aZ = SpinBox_Vz->GetValue();
aModule = sqrt(aX*aX + aY*aY + aZ*aZ);
}
-
- bool anIsEnable = myNbOkElements > 0 && aModule > 1.0E-38;
-
- buttonOk->setEnabled(anIsEnable);
- buttonApply->setEnabled(anIsEnable);
+ return aModule > 1.0E-38;
}
//=================================================================================
{
disconnect(mySelectionMgr, 0, this, 0);
+ hidePreview();
+
switch (constructorId) {
case 0:
{
SpinBox_VDist->show();
SelectVectorButton->show();
}
+ onDisplaySimulation(true);
// AdjustSize
qApp->processEvents();
updateGeometry();
if (myNbOkElements) {
SMESH::DirStruct aVector;
+ getExtrusionVector(aVector);
+
QStringList aParameters;
-
if ( RadioButton3->isChecked() ) {
- aVector.PS.x = SpinBox_Dx->GetValue();
- aVector.PS.y = SpinBox_Dy->GetValue();
- aVector.PS.z = SpinBox_Dz->GetValue();
-
aParameters << SpinBox_Dx->text();
aParameters << SpinBox_Dy->text();
aParameters << SpinBox_Dz->text();
} else if ( RadioButton4->isChecked() ) {
- gp_XYZ aNormale(SpinBox_Vx->GetValue(),
- SpinBox_Vy->GetValue(),
- SpinBox_Vz->GetValue());
-
-
- aNormale /= aNormale.Modulus();
- long aVDist = (long)SpinBox_VDist->value();
-
- aVector.PS.x = aNormale.X()*aVDist;
- aVector.PS.y = aNormale.Y()*aVDist;
- aVector.PS.z = aNormale.Z()*aVDist;
-
aParameters << SpinBox_Vx->text();
aParameters << SpinBox_Vy->text();
aParameters << SpinBox_Vz->text();
mySelectionMgr->clearSelected();
mySelectedObject = SMESH::SMESH_IDSource::_nil();
SelectionIntoArgument();
+
+ SMESHGUI::Modified();
}
return true;
}
CheckIsEnable();
+ onDisplaySimulation(true);
+
myBusy = false;
}
}
+ onDisplaySimulation(true);
+
// OK
CheckIsEnable();
}
}
return true;
}
+
+//=================================================================================
+// function : onDisplaySimulation
+// purpose : Show/Hide preview
+//=================================================================================
+void SMESHGUI_ExtrusionDlg::onDisplaySimulation( bool toDisplayPreview ) {
+ if (myPreviewCheckBox->isChecked() && toDisplayPreview) {
+ if (myNbOkElements && isValid() && isValuesValid()) {
+ //Get input vector
+ SMESH::DirStruct aVector;
+ getExtrusionVector(aVector);
+
+ //Get Number of the steps
+ long aNbSteps = (long)SpinBox_NbSteps->value();
+
+ try {
+ SUIT_OverrideCursor aWaitCursor;
+ SMESH::SMESH_MeshEditor_var aMeshEditor = myMesh->GetMeshEditPreviewer();
+ if( CheckBoxMesh->isChecked() ) {
+ if( GetConstructorId() == 0 )
+ aMeshEditor->ExtrusionSweepObject1D(mySelectedObject, aVector, aNbSteps);
+ else
+ aMeshEditor->ExtrusionSweepObject2D(mySelectedObject, aVector, aNbSteps);
+ }
+ else
+ aMeshEditor->ExtrusionSweep(myElementsId.inout(), aVector, aNbSteps);
+
+ SMESH::MeshPreviewStruct_var aMeshPreviewStruct = aMeshEditor->GetPreviewData();
+ mySimulation->SetData(aMeshPreviewStruct._retn());
+ } catch (...) {
+ hidePreview();
+ }
+ } else {
+ hidePreview();
+ }
+ } else {
+ hidePreview();
+ }
+}
+
+//=================================================================================
+// function : getExtrusionVector()
+// purpose : get direction of the extrusion
+//=================================================================================
+void SMESHGUI_ExtrusionDlg::getExtrusionVector(SMESH::DirStruct& aVector) {
+ if ( RadioButton3->isChecked() ) {
+ aVector.PS.x = SpinBox_Dx->GetValue();
+ aVector.PS.y = SpinBox_Dy->GetValue();
+ aVector.PS.z = SpinBox_Dz->GetValue();
+ } else if ( RadioButton4->isChecked() ) {
+ gp_XYZ aNormale(SpinBox_Vx->GetValue(),
+ SpinBox_Vy->GetValue(),
+ SpinBox_Vz->GetValue());
+
+
+ aNormale /= aNormale.Modulus();
+ long aVDist = (long)SpinBox_VDist->value();
+
+ aVector.PS.x = aNormale.X()*aVDist;
+ aVector.PS.y = aNormale.Y()*aVDist;
+ aVector.PS.z = aNormale.Z()*aVDist;
+ }
+}
