-// Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2024 CEA, EDF, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
// File : SMESHGUI.cxx
// Author : Nicolas REJNERI, Open CASCADE S.A.S.
+#include <Basics_OCCTVersion.hxx>
+
+#if OCC_VERSION_LARGE < 0x07080000
+
#include <Standard_math.hxx> // E.A. must be included before Python.h to fix compilation on windows
+
+#else
+
+#ifdef _MSC_VER
+#ifndef _USE_MATH_DEFINES
+#define _USE_MATH_DEFINES
+#endif
+#include <math.h>
+#endif
+
+#endif
+
#ifdef HAVE_FINITE
#undef HAVE_FINITE // VSR: avoid compilation warning on Linux : "HAVE_FINITE" redefined
#endif
#include "SMESHGUI.h"
#include "SMESHGUI_Add0DElemsOnAllNodesDlg.h"
#include "SMESHGUI_AddMeshElementDlg.h"
+#include "SMESHGUI_AddNodeOnSegmentDlg.h"
+#include "SMESHGUI_AddNodeOnFaceDlg.h"
#include "SMESHGUI_AddQuadraticElementDlg.h"
#include "SMESHGUI_BuildCompoundDlg.h"
#include "SMESHGUI_ClippingDlg.h"
#include "SMESHGUI_CopyMeshDlg.h"
#include "SMESHGUI_CreatePolyhedralVolumeDlg.h"
#include "SMESHGUI_DeleteGroupDlg.h"
+#include "SMESHGUI_DisplayEntitiesDlg.h"
#include "SMESHGUI_Displayer.h"
#include "SMESHGUI_DuplicateNodesDlg.h"
#include "SMESHGUI_ExtrusionAlongPathDlg.h"
#include "SMESHGUI_ExtrusionDlg.h"
+#include "SMESHGUI_FaceGroupsSeparatedByEdgesDlg.h"
#include "SMESHGUI_FieldSelectorWdg.h"
#include "SMESHGUI_FileInfoDlg.h"
#include "SMESHGUI_FileValidator.h"
#include "SMESHGUI_FilterDlg.h"
#include "SMESHGUI_FilterLibraryDlg.h"
+#include "SMESHGUI_FilterUtils.h"
#include "SMESHGUI_FindElemByPointDlg.h"
+#include "SMESHGUI_GEOMGenUtils.h"
#include "SMESHGUI_GroupDlg.h"
#include "SMESHGUI_GroupOnShapeDlg.h"
#include "SMESHGUI_GroupOpDlg.h"
+#include "SMESHGUI_GroupUtils.h"
#include "SMESHGUI_Hypotheses.h"
+#include "SMESHGUI_HypothesesUtils.h"
+#include "SMESHGUI_MG_ADAPTDRIVER.h"
+#include "SMESHGUI_HomardAdaptDlg.h"
#include "SMESHGUI_Make2DFrom3DOp.h"
+#include "SMESHGUI_MakeFull2DFrom3DOp.h"
#include "SMESHGUI_MakeNodeAtPointDlg.h"
#include "SMESHGUI_Measurements.h"
#include "SMESHGUI_MergeDlg.h"
#include "SMESHGUI_MeshInfo.h"
+#include "SMESHGUI_Meshio.h"
#include "SMESHGUI_MeshOp.h"
#include "SMESHGUI_MeshOrderOp.h"
#include "SMESHGUI_MeshPatternDlg.h"
+#include "SMESHGUI_MeshUtils.h"
#include "SMESHGUI_MultiEditDlg.h"
#include "SMESHGUI_NodesDlg.h"
+#include "SMESHGUI_OffsetDlg.h"
#include "SMESHGUI_Operations.h"
+#include "SMESHGUI_PatternUtils.h"
#include "SMESHGUI_Preferences_ScalarBarDlg.h"
#include "SMESHGUI_PropertiesDlg.h"
#include "SMESHGUI_RemoveElementsDlg.h"
+#include "SMESHGUI_RemoveNodeReconnectionDlg.h"
#include "SMESHGUI_RemoveNodesDlg.h"
#include "SMESHGUI_RenumberingDlg.h"
#include "SMESHGUI_ReorientFacesDlg.h"
#include "SMESHGUI_RevolutionDlg.h"
#include "SMESHGUI_RotationDlg.h"
#include "SMESHGUI_ScaleDlg.h"
-#include "SMESHGUI_OffsetDlg.h"
#include "SMESHGUI_Selection.h"
#include "SMESHGUI_SewingDlg.h"
#include "SMESHGUI_SingleEditDlg.h"
#include "SMESHGUI_SmoothingDlg.h"
+#include "SMESHGUI_SpinBox.h"
+#include "SMESHGUI_SplitBiQuad.h"
#include "SMESHGUI_SymmetryDlg.h"
#include "SMESHGUI_TranslationDlg.h"
#include "SMESHGUI_TransparencyDlg.h"
-#include "SMESHGUI_DisplayEntitiesDlg.h"
-#include "SMESHGUI_SplitBiQuad.h"
-
-#include "SMESHGUI_FilterUtils.h"
-#include "SMESHGUI_GEOMGenUtils.h"
-#include "SMESHGUI_GroupUtils.h"
-#include "SMESHGUI_HypothesesUtils.h"
-#include "SMESHGUI_MeshUtils.h"
-#include "SMESHGUI_PatternUtils.h"
+#include "SMESHGUI_CreateDualMeshDlg.h"
+#include "SMESHGUI_CreateDualMeshOp.h"
#include "SMESHGUI_Utils.h"
#include "SMESHGUI_VTKUtils.h"
#include "SMESH_version.h"
-#include "SMESH_ControlsDef.hxx"
#include "SMESH_Actor.h"
#include "SMESH_ActorUtils.h"
#include "SMESH_Client.hxx"
+#include "SMESH_Comment.hxx"
+#include "SMESH_ControlsDef.hxx"
#include "SMESH_ScalarBarActor.h"
#include "SMESH_TypeFilter.hxx"
// SALOME GUI includes
-#include <SalomeApp_Application.h>
-#include <SalomeApp_CheckFileDlg.h>
-#include <SalomeApp_DataObject.h>
-#include <SalomeApp_Study.h>
-#include <SalomeApp_Tools.h>
-
#include <LightApp_DataOwner.h>
#include <LightApp_NameDlg.h>
#include <LightApp_Preferences.h>
#include <LightApp_SelectionMgr.h>
#include <LightApp_UpdateFlags.h>
-
-#include <SVTK_ViewManager.h>
-#include <SVTK_ViewModel.h>
-#include <SVTK_ViewWindow.h>
-
-#include <VTKViewer_Algorithm.h>
-
+#include <QtxFontEdit.h>
+#include <QtxPopupMgr.h>
+#include <QtxInfoPanel.h>
+#include <SALOME_ListIO.hxx>
#include <SUIT_Desktop.h>
#include <SUIT_FileDlg.h>
#include <SUIT_MessageBox.h>
#include <SUIT_OverrideCursor.h>
#include <SUIT_ResourceMgr.h>
#include <SUIT_Session.h>
-
-#include <QtxPopupMgr.h>
-#include <QtxFontEdit.h>
-
-#include <SALOME_ListIO.hxx>
+#include <SVTK_Renderer.h>
+#include <SVTK_ViewManager.h>
+#include <SVTK_ViewModel.h>
+#include <SVTK_ViewWindow.h>
+#include <SalomeApp_Application.h>
+#include <SalomeApp_CheckFileDlg.h>
+#include <SalomeApp_DataObject.h>
+#include <SalomeApp_Study.h>
+#include <SalomeApp_Tools.h>
+#include <VTKViewer_Algorithm.h>
#ifndef DISABLE_PLOT2DVIEWER
#include <SPlot2d_ViewModel.h>
#include CORBA_CLIENT_HEADER(SMESH_MeshEditor)
#include CORBA_CLIENT_HEADER(SMESH_Measurements)
#include CORBA_CLIENT_HEADER(SMESH_Mesh)
+#include CORBA_CLIENT_HEADER(SMESH_Homard)
// Qt includes
// #define INCLUDE_MENUITEM_DEF // VSR commented ????????
#include <QApplication>
+#include <QCheckBox>
+#include <QDialogButtonBox>
+#include <QLayout>
+#include <QListView>
#include <QMenu>
#include <QTextStream>
-#include <QListView>
#include <QTreeView>
-#include <QCheckBox>
-#include <QLayout>
-#include <QDialogButtonBox>
// BOOST includes
#include <boost/shared_ptr.hpp>
#include <vtkRenderer.h>
// SALOME KERNEL includes
+#include <Basics_Utils.hxx>
#include <SALOMEDSClient_ClientFactory.hxx>
#include <SALOMEDSClient_IParameters.hxx>
#include <SALOMEDSClient_SComponent.hxx>
#include <SALOMEDSClient_StudyBuilder.hxx>
-#include <SALOMEDS_Study.hxx>
#include <SALOMEDS_SObject.hxx>
-#include "utilities.h"
+#include <SALOMEDS_Study.hxx>
+#include <SALOME_GenericObj_wrap.hxx>
+#include <SALOME_LifeCycleCORBA.hxx>
+#include <utilities.h>
// OCCT includes
#include <Standard_ErrorHandler.hxx>
#include <NCollection_DataMap.hxx>
#include <NCollection_DoubleMap.hxx>
-#include <Basics_Utils.hxx>
-
// Below macro, when uncommented, switches on simplified (more performant) algorithm
// of auto-color picking up
#define SIMPLE_AUTOCOLOR
void Control( int theCommandID );
// Definitions
+
//================================================================================
/*!
* \brief Reads meshes from file
theCommandID == SMESHOp::OpPopupImportCGNS ) {
filter.append( QObject::tr( "CGNS_FILES_FILTER" ) + " (*.cgns)" );
}
- else if ( theCommandID == SMESHOp::OpImportSAUV ||
- theCommandID == SMESHOp::OpPopupImportSAUV ) {
- filter.append( QObject::tr( "SAUV_FILES_FILTER" ) + " (*.sauv *.sauve)" );
- filter.append( QObject::tr( "ALL_FILES_FILTER" ) + " (*)" );
- }
else if ( theCommandID == SMESHOp::OpImportGMF ||
theCommandID == SMESHOp::OpPopupImportGMF ) {
filter.append( QObject::tr( "GMF_ASCII_FILES_FILTER" ) + " (*.mesh)" );
filter.append( QObject::tr( "GMF_BINARY_FILES_FILTER") + " (*.meshb)" );
}
+ else if (theCommandID == SMESHOp::OpImportMESHIO) {
+ if (!SMESHGUI_Meshio::IsMeshioInstalled())
+ return;
+
+ filter = SMESHGUI_Meshio::GetImportFileFilter();
+ }
QString anInitialPath = "";
if ( SUIT_FileDlg::getLastVisitedPath().isEmpty() )
}
break;
}
- case SMESHOp::OpImportSAUV:
- case SMESHOp::OpPopupImportSAUV:
- {
- // SAUV format
- SMESH::DriverMED_ReadStatus res;
- aMeshes = theComponentMesh->CreateMeshesFromSAUV( filename.toUtf8().constData(), res );
- if ( res != SMESH::DRS_OK ) {
- errors.append( QString( "%1 :\n\t%2" ).arg( filename ).
- arg( QObject::tr( QString( "SMESH_DRS_%1" ).arg( res ).toLatin1().data() ) ) );
- }
- break;
- }
case SMESHOp::OpImportGMF:
case SMESHOp::OpPopupImportGMF:
{
}
break;
}
+ case SMESHOp::OpImportMESHIO:
+ {
+ aMeshes = SMESHGUI_Meshio::ImportMesh(theComponentMesh, filename, errors);
+ break;
+ }
}
}
catch ( const SALOME::SALOME_Exception& S_ex ) {
- errors.append( QString( "%1 :\n\t%2" ).arg( filename ).
- arg( QObject::tr( "SMESH_ERR_UNKNOWN_IMPORT_ERROR" ) ) );
+ const QString exText(S_ex.details.text);
+ if (exText.startsWith("MESHIO"))
+ errors.append('\n' + exText);
+ else
+ errors.append( QString( "%1 :\n\t%2" ).arg( filename ).
+ arg( QObject::tr( "SMESH_ERR_UNKNOWN_IMPORT_ERROR" ) ) );
}
for ( int i = 0, iEnd = aMeshes->length(); i < iEnd; i++ )
theCommandID == SMESHOp::OpPopupExportSTL );
const bool isCGNS= ( theCommandID == SMESHOp::OpExportCGNS ||
theCommandID == SMESHOp::OpPopupExportCGNS );
- const bool isSAUV= ( theCommandID == SMESHOp::OpExportSAUV ||
- theCommandID == SMESHOp::OpPopupExportSAUV );
const bool isGMF = ( theCommandID == SMESHOp::OpExportGMF ||
theCommandID == SMESHOp::OpPopupExportGMF );
+ const bool isMESHIO = (theCommandID == SMESHOp::OpExportMESHIO);
+
+ if (isMESHIO && !SMESHGUI_Meshio::IsMeshioInstalled())
+ {
+ return;
+ }
- const bool multiMeshSupported = ( isMED || isCGNS ); // file can hold several meshes
+ const bool multiMeshSupported = isMED || isCGNS || isMESHIO; // file can hold several meshes
if ( selected.Extent() == 0 || ( selected.Extent() > 1 && !multiMeshSupported ))
return;
SUIT_ResourceMgr* resMgr = SUIT_Session::session()->resourceMgr();
bool aCheckWarn = true;
if ( resMgr )
aCheckWarn = resMgr->booleanValue( "SMESH", "show_warning", false );
+
// get mesh object from selection and check duplication of their names
bool hasDuplicatedMeshNames = false;
QList< QPair< SMESH::SMESH_IDSource_var, QString > > aMeshList;
QDialogButtonBox* btnbox = msgBox.findChild<QDialogButtonBox*>();
lt->addWidget(&dontShowCheckBox, lt->rowCount(), lt->columnCount()-1, lt->rowCount(), lt->columnCount());
lt->addWidget(btnbox, lt->rowCount(), 0, lt->rowCount(), lt->columnCount());
- if(msgBox.exec() == QMessageBox::Ok)
- {
- if(dontShowCheckBox.checkState() == Qt::Checked)
- {
- if ( resMgr )
- resMgr->setValue( "SMESH", "show_warning", false);
- }
- aCheckWarn = false;
- }
- else
+ if ( msgBox.exec() != QMessageBox::Ok )
return;
+
+ if ( dontShowCheckBox.checkState() == Qt::Checked && resMgr )
+ resMgr->setValue( "SMESH", "show_warning", false);
}
QString aMeshName = anIObject->getName();
SMESH::SMESH_Mesh_var aMesh = aMeshOrGroup->GetMesh();
QString aMeshName = (*aMeshIter).second;
- if ( isMED || isCGNS || isSAUV ) // formats where group names must be unique
+ if (isMED || isCGNS || isMESHIO) // formats where group names must be unique
{
// check for equal group names within each mesh
for( aMeshIter = aMeshList.begin(); aMeshIter != aMeshList.end(); aMeshIter++ ) {
}
}
}
-
+
// Warn the user about presence of not supported elements
QString format;
std::vector< SMESH::EntityType > notSupportedElemTypes, presentNotSupported;
format = "CGNS";
notSupportedElemTypes.push_back( SMESH::Entity_Ball );
}
- else if ( isSAUV )
- {
- format = "SAUV";
- notSupportedElemTypes.push_back( SMESH::Entity_Ball );
- notSupportedElemTypes.push_back( SMESH::Entity_BiQuad_Triangle );
- notSupportedElemTypes.push_back( SMESH::Entity_BiQuad_Quadrangle );
- notSupportedElemTypes.push_back( SMESH::Entity_TriQuad_Hexa );
- notSupportedElemTypes.push_back( SMESH::Entity_Hexagonal_Prism );
- notSupportedElemTypes.push_back( SMESH::Entity_Polygon );
- notSupportedElemTypes.push_back( SMESH::Entity_Quad_Polygon );
- notSupportedElemTypes.push_back( SMESH::Entity_Polyhedra );
- }
else if ( isGMF )
{
format = "GMF";
}
if ( ! notSupportedElemTypes.empty() )
{
- SMESH::long_array_var nbElems = aMeshOrGroup->GetMeshInfo();
+ SMESH::smIdType_array_var nbElems = aMeshOrGroup->GetMeshInfo();
for ( size_t iType = 0; iType < notSupportedElemTypes.size(); ++iType )
if ( nbElems[ notSupportedElemTypes[ iType ]] > 0 )
presentNotSupported.push_back( notSupportedElemTypes[ iType ]);
"SMESH_OCTAHEDRA","SMESH_POLYEDRONS","SMESH_QUADRATIC_POLYEDRONS","SMESH_BALLS"
};
// is typeMsg complete? (compilation failure mains that enum SMDSAbs_EntityType changed)
- const int nbTypes = sizeof( typeMsg ) / sizeof( const char* );
- int _assert[( nbTypes == SMESH::Entity_Last ) ? 2 : -1 ]; _assert[0]=_assert[1]=0;
+ static_assert( sizeof(typeMsg) / sizeof(const char*) == SMESH::Entity_Last,
+ "Update names of EntityType's!!!" );
QString andStr = " " + QObject::tr("SMESH_AND") + " ", comma(", ");
for ( size_t iType = 0; iType < presentNotSupported.size(); ++iType ) {
// Get parameters of export operation
QString aFilename;
+ QString aSelectedFilter; // for meshio to get a filter selected by user
int aFormat =-1; // for MED version used for write
bool isOkToWrite = true; // to check MED file version compatibility before adding a mesh in an existing file
// Init the parameters with the default values
bool aIsASCII_STL = true;
- bool toCreateGroups = false;
- if ( resMgr )
- toCreateGroups = resMgr->booleanValue( "SMESH", "auto_groups", false );
- bool toOverwrite = true;
- bool toFindOutDim = true;
+ bool toCreateGroups = resMgr->booleanValue( "SMESH", "auto_groups", false );
+ bool toOverwrite = true;
+ bool toFindOutDim = true;
+ bool saveNumbers = resMgr->booleanValue( "SMESH", "med_save_numbers", true );
+ bool toRenumber = true;
+ double zTol = resMgr->doubleValue( "SMESH", "med_ztolerance", 0. );
QString aFilter, aTitle = QObject::tr("SMESH_EXPORT_MESH");
QString anInitialPath = "";
QList< QPair< GEOM::ListOfFields_var, QString > > aFieldList;
- // Get a file name to write in and additional otions
- if ( isUNV || isDAT || isGMF ) // Export w/o options
+ // Get a file name to write in and additional options
+ if ( isGMF ) // Export w/o options
{
- if ( isUNV )
- aFilter = QObject::tr( "IDEAS_FILES_FILTER" ) + " (*.unv)";
- else if ( isDAT )
- aFilter = QObject::tr( "DAT_FILES_FILTER" ) + " (*.dat)";
- else if ( isGMF )
- aFilter = QObject::tr( "GMF_ASCII_FILES_FILTER" ) + " (*.mesh)" +
- ";;" + QObject::tr( "GMF_BINARY_FILES_FILTER" ) + " (*.meshb)";
- if ( anInitialPath.isEmpty() ) anInitialPath = SUIT_FileDlg::getLastVisitedPath();
+ aFilter = QObject::tr( "GMF_ASCII_FILES_FILTER" ) + " (*.mesh)" +
+ ";;" + QObject::tr( "GMF_BINARY_FILES_FILTER" ) + " (*.meshb)";
+ if ( anInitialPath.isEmpty() ) anInitialPath = SUIT_FileDlg::getLastVisitedPath();
+
aFilename = SUIT_FileDlg::getFileName(SMESHGUI::desktop(),
anInitialPath + QString("/") + aMeshName,
aFilter, aTitle, false);
}
- else if ( isCGNS )// Export to CGNS
+ else if ( isCGNS || isUNV || isDAT ) // Export to [ CGNS | UNV | DAT ] - one option
{
- const char* theByTypeResource = "cgns_group_elems_by_type";
- toCreateGroups = SMESHGUI::resourceMgr()->booleanValue( "SMESH", theByTypeResource, false );
+ const char* theOptionResource = isCGNS ? "cgns_group_elems_by_type" : "export_renumber";
+ bool option = resMgr->booleanValue( "SMESH", theOptionResource, false );
QStringList checkBoxes;
- checkBoxes << QObject::tr("CGNS_EXPORT_ELEMS_BY_TYPE");
+ checkBoxes << QObject::tr( isCGNS ? "CGNS_EXPORT_ELEMS_BY_TYPE" : "SMESH_RENUMBER" );
SalomeApp_CheckFileDlg* fd =
new SalomeApp_CheckFileDlg ( SMESHGUI::desktop(), false, checkBoxes, true, true );
fd->setWindowTitle( aTitle );
- fd->setNameFilter( QObject::tr( "CGNS_FILES_FILTER" ) + " (*.cgns)" );
+ if ( isCGNS )
+ fd->setNameFilter( QObject::tr( "CGNS_FILES_FILTER" ) + " (*.cgns)" );
+ else if ( isUNV )
+ fd->setNameFilter( QObject::tr( "IDEAS_FILES_FILTER" ) + " (*.unv)" );
+ else if ( isDAT )
+ fd->setNameFilter( QObject::tr( "DAT_FILES_FILTER" ) + " (*.dat)" );
if ( !anInitialPath.isEmpty() )
fd->setDirectory( anInitialPath );
- fd->selectFile(aMeshName);
+ fd->selectFile( aMeshName );
SMESHGUI_FileValidator* fv = new SMESHGUI_FileValidator( fd );
fd->setValidator( fv );
- fd->SetChecked( toCreateGroups, 0 );
+ fd->SetChecked( option, 0 );
if ( fd->exec() )
aFilename = fd->selectedFile();
- toOverwrite = fv->isOverwrite(aFilename);
- toCreateGroups = fd->IsChecked(0);
- SMESHGUI::resourceMgr()->setValue("SMESH", theByTypeResource, toCreateGroups );
+ toOverwrite = fv->isOverwrite( aFilename );
+ option = fd->IsChecked( 0 );
+ SMESHGUI::resourceMgr()->setValue("SMESH", theOptionResource, option );
+ ( isCGNS ? toCreateGroups : toRenumber ) = option;
delete fd;
}
}
delete fd;
}
- else if ( isMED || isSAUV ) // Export to MED or SAUV
+ else if ( isMED ) // Export to MED
{
int defaultVersion = 0;
QMap<QString, int> aFilterMap;
- if ( isMED ) {
- //filters << QObject::tr( "MED_FILES_FILTER" ) + " (*.med)";
- //QString vmed (aMesh->GetVersionString(-1, 2));
- //MESSAGE("MED version: " << vmed.toStdString());
- SMESH::long_array_var mvok = aMesh->GetMEDVersionsCompatibleForAppend();
- for ( int i = 0; i < mvok->length(); ++i ) // i=0 must correspond to the current version to set the default filter on it
- {
- int versionInt = mvok[i];
- if (i == 0)
- defaultVersion = versionInt;
- std::ostringstream vss;
- vss << versionInt/10;
- vss << ".";
- vss << versionInt%10;
- QString vs = vss.str().c_str();
- MESSAGE("MED version: " << vs.toStdString());
- aFilterMap.insert( QObject::tr( "MED_VX_FILES_FILTER" ).arg( vs ) + " (*.med)", versionInt);
- }
- }
- else { // isSAUV
- aFilterMap.insert("All files (*)", -1 );
- aFilterMap.insert("SAUV files (*.sauv)", defaultVersion ); // 0 = default filter (defaultVersion)
- aFilterMap.insert("SAUV files (*.sauve)", -1 );
+ //filters << QObject::tr( "MED_FILES_FILTER" ) + " (*.med)";
+ //QString vmed (aMesh->GetVersionString(-1, 2));
+ SMESH::long_array_var mvok = aMesh->GetMEDVersionsCompatibleForAppend();
+ if ( mvok->length() > 0)
+ defaultVersion = mvok[0]; // the current version to set the default filter on it
+ for ( CORBA::ULong i = 0; i < mvok->length(); ++i )
+ {
+ QString vs = (char*)( SMESH_Comment( mvok[i]/10 ) << "." << mvok[i]%10 );
+ aFilterMap.insert( QObject::tr( "MED_VX_FILES_FILTER" ).arg( vs ) + " (*.med)", mvok[i]);
}
- MESSAGE("default version="<< defaultVersion);
QStringList filters;
QMap<QString, int>::const_iterator it = aFilterMap.begin();
QString aDefaultFilter = it.key();
aDefaultFilter = it.key();
}
QStringList checkBoxes;
- checkBoxes << QObject::tr("SMESH_AUTO_GROUPS") << QObject::tr("SMESH_AUTO_DIM");
+ checkBoxes << QObject::tr("SMESH_AUTO_GROUPS")
+ << QObject::tr("SMESH_AUTO_DIM")
+ << QObject::tr("SMESH_MED_SAVE_NUMS");
SMESHGUI_FieldSelectorWdg* fieldSelWdg = new SMESHGUI_FieldSelectorWdg();
QList< QWidget* > wdgList;
if ( fieldSelWdg->GetAllFields( aMeshList, aFieldList ))
wdgList.append( fieldSelWdg );
+ QWidget* zTolWdg = new QWidget();
+ QCheckBox* zTolCheck = new QCheckBox( QObject::tr( "SMESH_ZTOLERANCE" ), zTolWdg );
+ SMESHGUI_SpinBox* zTolSpin = new SMESHGUI_SpinBox( zTolWdg );
+ QHBoxLayout* zTolLayout = new QHBoxLayout( zTolWdg );
+ zTolLayout->addWidget( zTolCheck );
+ zTolLayout->addWidget( zTolSpin );
+ zTolLayout->setMargin( 0 );
+ zTolSpin->RangeStepAndValidator( 0, 1e+100, 1., "length_precision" );
+ zTolSpin->setValue( zTol );
+ QObject::connect( zTolCheck, SIGNAL( toggled(bool)), zTolSpin, SLOT( setEnabled(bool)));
+ zTolCheck->setChecked( resMgr->booleanValue( "SMESH", "enable_ztolerance", false ));
+ zTolSpin ->setEnabled( zTolCheck->isChecked() );
+ wdgList.append( zTolWdg );
+
SalomeApp_CheckFileDlg* fd =
new SalomeApp_CheckFileDlg ( SMESHGUI::desktop(), false, checkBoxes, true, true, wdgList );
fd->setWindowTitle( aTitle );
fd->selectNameFilter( aDefaultFilter );
fd->SetChecked( toCreateGroups, 0 );
fd->SetChecked( toFindOutDim, 1 );
+ fd->SetChecked( saveNumbers, 2 );
if ( !anInitialPath.isEmpty() )
fd->setDirectory( anInitialPath );
fd->selectFile(aMeshName);
-
-
+
+
QListView *lview = fd->findChild<QListView*>("listView");
if( lview ) {
lview->setMinimumHeight(200);
fd->setValidator( fv );
bool is_ok = false;
- while (!is_ok) {
- MESSAGE("******* Loop on file dialog ***********");
+ while (!is_ok)
+ {
+ //MESSAGE("******* Loop on file dialog ***********");
isOkToWrite =true;
if ( fd->exec() )
aFilename = fd->selectedFile();
break;
}
aFormat = aFilterMap[fd->selectedNameFilter()];
- MESSAGE("selected version: " << aFormat << " file: " << aFilename.toUtf8().constData());
+ //MESSAGE("selected version: " << aFormat << " file: " << aFilename.toUtf8().constData());
toOverwrite = fv->isOverwrite(aFilename);
- MESSAGE("toOverwrite:" << toOverwrite);
+ //MESSAGE("toOverwrite:" << toOverwrite);
is_ok = true;
if ( !aFilename.isEmpty() ) {
if( !toOverwrite ) {
QObject::tr("SMESH_BUT_YES"),
QObject::tr("SMESH_BUT_NO"), 0, 1);
if (aRet == 0)
- {
- toOverwrite = true;
- MESSAGE("incompatible MED file version for add, overwrite accepted");
- }
+ {
+ toOverwrite = true;
+ //MESSAGE("incompatible MED file version for add, overwrite accepted");
+ }
else
- {
- isOkToWrite = false;
- is_ok = false;
- MESSAGE("incompatible MED file version for add, overwrite refused");
- }
+ {
+ isOkToWrite = false;
+ is_ok = false;
+ //MESSAGE("incompatible MED file version for add, overwrite refused");
+ }
}
QStringList aMeshNamesCollisionList;
SMESH::string_array_var aMeshNames = SMESHGUI::GetSMESHGen()->GetMeshNames( aFilename.toUtf8().constData() );
}
}
}
- if( !aMeshNamesCollisionList.isEmpty() ) {
+ if( !aMeshNamesCollisionList.isEmpty() ) {
isOkToWrite = false;
QString aMeshNamesCollisionString = aMeshNamesCollisionList.join( ", " );
int aRet = SUIT_MessageBox::warning(SMESHGUI::desktop(),
QObject::tr("SMESH_BUT_YES"),
QObject::tr("SMESH_BUT_NO"),
QObject::tr("SMESH_BUT_CANCEL"), 0, 2);
- MESSAGE("answer collision name " << aRet);
- if (aRet == 0) {
+ MESSAGE("answer collision name " << aRet);
+ if (aRet == 0) {
toOverwrite = true;
isOkToWrite = true;
}
}
}
}
- MESSAGE(" ****** end of file dialog loop, toOverwrite:" << toOverwrite << " isOkToWrite:" << isOkToWrite);
toCreateGroups = fd->IsChecked(0);
toFindOutDim = fd->IsChecked(1);
+ saveNumbers = fd->IsChecked(2);
+ zTol = zTolCheck->isChecked() ? zTolSpin->value() : -1;
fieldSelWdg->GetSelectedFields();
+ if ( resMgr ) resMgr->setValue( "SMESH", "enable_ztolerance", zTolCheck->isChecked() );
+
if ( !fieldSelWdg->parent() )
delete fieldSelWdg;
+ if ( !zTolWdg->parent() )
+ delete zTolWdg;
delete fd;
}
+ else if (isMESHIO)
+ {
+ if (SMESHGUI_Meshio::CheckMeshCount(aMeshList))
+ {
+ aFilename = SMESHGUI_Meshio::GetFileName(aSelectedFilter);
+ MESSAGE("aSelectedFilter: " << aSelectedFilter.toStdString());
+ }
+ }
else
{
return;
try {
// Renumbering is not needed since SMDS redesign in V6.2.0 (Nov 2010)
-// bool Renumber = false;
-// // PAL 14172 : Check of we have to renumber or not from the preferences before export
-// if (resMgr)
-// Renumber= resMgr->booleanValue("renumbering");
-// if (Renumber){
-// SMESH::SMESH_MeshEditor_var aMeshEditor = aMesh->GetMeshEditor();
+ // bool Renumber = false;
+ // // PAL 14172 : Check of we have to renumber or not from the preferences before export
+ // if (resMgr)
+ // Renumber= resMgr->booleanValue("renumbering");
+ // if (Renumber){
+ // SMESH::SMESH_MeshEditor_var aMeshEditor = aMesh->GetMeshEditor();
// aMeshEditor->RenumberNodes();
// aMeshEditor->RenumberElements();
// if ( SMESHGUI::automaticUpdate() )
// SMESH::UpdateView();
// }
- if ( isMED && isOkToWrite)
+ if ( isMED && isOkToWrite )
{
- MESSAGE("OK to write MED file "<< aFilename.toUtf8().constData());
aMeshIter = aMeshList.begin();
for( int aMeshIndex = 0; aMeshIter != aMeshList.end(); aMeshIter++, aMeshIndex++ )
{
SMESH::SMESH_Mesh_var aMeshItem = aMeshOrGroup->GetMesh();
const GEOM::ListOfFields& fields = aFieldList[ aMeshIndex ].first.in();
const QString& geoAssFields = aFieldList[ aMeshIndex ].second;
- const bool hasFields = ( fields.length() || !geoAssFields.isEmpty() );
- if ( !hasFields && aMeshOrGroup->_is_equivalent( aMeshItem ))
- aMeshItem->ExportMED( aFilename.toUtf8().data(), toCreateGroups, aFormat,
- toOverwrite && aMeshIndex == 0, toFindOutDim );
- else
- aMeshItem->ExportPartToMED( aMeshOrGroup, aFilename.toUtf8().data(), toCreateGroups, aFormat,
- toOverwrite && aMeshIndex == 0, toFindOutDim,
- fields, geoAssFields.toLatin1().data() );
- }
- }
- else if ( isSAUV )
- {
- for( aMeshIter = aMeshList.begin(); aMeshIter != aMeshList.end(); aMeshIter++ )
- {
- SMESH::SMESH_Mesh_var aMeshItem = SMESH::SMESH_Mesh::_narrow( (*aMeshIter).first );
- if( !aMeshItem->_is_nil() )
- aMeshItem->ExportSAUV( aFilename.toUtf8().data(), toCreateGroups );
+
+ aMeshItem->ExportPartToMED( aMeshOrGroup, aFilename.toUtf8().data(),
+ toCreateGroups, aFormat,
+ toOverwrite && aMeshIndex == 0, toFindOutDim,
+ fields, geoAssFields.toLatin1().data(), zTol, saveNumbers );
}
}
else if ( isDAT )
{
if ( aMeshOrGroup->_is_equivalent( aMesh ))
- aMesh->ExportDAT( aFilename.toUtf8().data() );
+ aMesh->ExportDAT( aFilename.toUtf8().data(), toRenumber );
else
- aMesh->ExportPartToDAT( aMeshOrGroup, aFilename.toUtf8().data() );
+ aMesh->ExportPartToDAT( aMeshOrGroup, aFilename.toUtf8().data(), toRenumber );
}
else if ( isUNV )
{
if ( aMeshOrGroup->_is_equivalent( aMesh ))
- aMesh->ExportUNV( aFilename.toUtf8().data() );
+ aMesh->ExportUNV( aFilename.toUtf8().data(), toRenumber );
else
- aMesh->ExportPartToUNV( aMeshOrGroup, aFilename.toUtf8().data() );
+ aMesh->ExportPartToUNV( aMeshOrGroup, aFilename.toUtf8().data(), toRenumber );
}
else if ( isSTL )
{
toCreateGroups = true;
aMesh->ExportGMF( aMeshOrGroup, aFilename.toUtf8().data(), toCreateGroups );
}
+ else if (isMESHIO)
+ {
+ SMESHGUI_Meshio::ExportMesh(aMeshList, aFilename, aSelectedFilter);
+ }
}
- catch (const SALOME::SALOME_Exception& S_ex){
+ catch (const SALOME::SALOME_Exception& S_ex)
+ {
wc.suspend();
- SUIT_MessageBox::warning(SMESHGUI::desktop(),
- QObject::tr("SMESH_WRN_WARNING"),
- QObject::tr("SMESH_EXPORT_FAILED") + SalomeApp_Tools::ExceptionToString(S_ex));
+ const QString exText(S_ex.details.text);
+
+ if ( S_ex.details.type == SALOME::COMM && // communicate about too large mesh
+ strncmp( "format=", S_ex.details.sourceFile.in(), 7 ) == 0 )
+
+ SUIT_MessageBox::critical(SMESHGUI::desktop(),
+ QObject::tr("SMESH_WRN_WARNING"),
+ QObject::tr(S_ex.details.text.in() ));
+ else if (exText.startsWith("MESHIO"))
+ {
+ SUIT_MessageBox::warning(SMESHGUI::desktop(),
+ QObject::tr("SMESH_WRN_WARNING"),
+ QObject::tr("SMESH_EXPORT_FAILED_SHORT") + "\n\n" + exText);
+ }
+ else
+ SUIT_MessageBox::warning(SMESHGUI::desktop(),
+ QObject::tr("SMESH_WRN_WARNING"),
+ QObject::tr("SMESH_EXPORT_FAILED") + SalomeApp_Tools::ExceptionToString(S_ex));
wc.resume();
}
}
type = QObject::tr( "ASPECTRATIO_3D_ELEMENTS" );
else if ( dynamic_cast< SMESH::Controls::Warping* >( f.get() ) )
type = QObject::tr( "WARP_ELEMENTS" );
+ else if (dynamic_cast<SMESH::Controls::Warping3D*>(f.get()))
+ type = QObject::tr("WARP_3D_ELEMENTS");
else if ( dynamic_cast< SMESH::Controls::Taper* >( f.get() ) )
type = QObject::tr( "TAPER_ELEMENTS" );
else if ( dynamic_cast< SMESH::Controls::Skew* >( f.get() ) )
type = QObject::tr( "EQUAL_VOLUME" );
else if ( dynamic_cast< SMESH::Controls::NodeConnectivityNumber* >( f.get() ) )
type = QObject::tr( "NODE_CONNECTIVITY_NB" );
+ else if ( dynamic_cast< SMESH::Controls::ScaledJacobian* >( f.get() ) )
+ type = QObject::tr( "SCALED_JACOBIAN" );
return type;
}
SMESH::Controls::NumericalFunctor* aNumFun =
dynamic_cast<SMESH::Controls::NumericalFunctor*>( aFunctor.get() );
if ( aNumFun ) {
- std::vector<int> elements;
+ std::vector<smIdType> elements;
SMESH::SMESH_Mesh_var mesh = SMESH::IObjectToInterface<SMESH::SMESH_Mesh>(anIO);
if ( mesh->_is_nil() ) {
SMESH::SMESH_IDSource_var idSource =
SMESH::IObjectToInterface<SMESH::SMESH_IDSource>(anIO);
if ( !idSource->_is_nil() )
{
- SMESH::long_array_var ids = idSource->GetIDs();
+ SMESH::smIdType_array_var ids = idSource->GetIDs();
elements.resize( ids->length() );
for ( unsigned i = 0; i < elements.size(); ++i )
elements[i] = ids[i];
}
}
+ // Break link with Shaper model
+ void breakShaperLink()
+ {
+ LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr();
+ SALOME_ListIO selected;
+ if (aSel) {
+ aSel->selectedObjects(selected);
+ if (selected.Extent()) {
+ Handle(SALOME_InteractiveObject) anIObject = selected.First();
+ _PTR(Study) aStudy = SMESH::getStudy();
+ std::string aEntry = anIObject->getEntry();
+ _PTR(SObject) aSObj = aStudy->FindObjectID(aEntry);
+ if (aSObj) {
+ std::string aName = aSObj->GetName();
+ QMessageBox::StandardButton aRes = SUIT_MessageBox::warning(SMESHGUI::desktop(),
+ QObject::tr("SMESH_WRN_WARNING"),
+ QObject::tr("MSG_BREAK_SHAPER_LINK").arg(aName.c_str()),
+ SUIT_MessageBox::Yes | SUIT_MessageBox::No, SUIT_MessageBox::No);
+ if (aRes == SUIT_MessageBox::Yes) {
+ SUIT_DataOwnerPtrList aList;
+ aSel->selected(aList, "ObjectBrowser", true);
+ SUIT_DataOwner* aOwn = aList.first();
+ LightApp_DataOwner* sowner = dynamic_cast<LightApp_DataOwner*>(aOwn);
+ QString aREntry = sowner->entry();
+
+ static GEOM::GEOM_Gen_var geomGen;
+ if (CORBA::is_nil(geomGen)) {
+ SalomeApp_Application* app = dynamic_cast<SalomeApp_Application*>
+ (SUIT_Session::session()->activeApplication());
+ if (app) {
+ SALOME_LifeCycleCORBA* ls = new SALOME_LifeCycleCORBA(app->namingService());
+ Engines::EngineComponent_var comp =
+ ls->FindOrLoad_Component("FactoryServer", "SHAPERSTUDY");
+ geomGen = GEOM::GEOM_Gen::_narrow(comp);
+ }
+ }
+ if (!CORBA::is_nil(geomGen))
+ {
+ geomGen->BreakLink(aREntry.toStdString().c_str());
+ SMESHGUI::GetSMESHGUI()->updateObjBrowser();
+
+ // remove actors whose objects are removed by BreakLink()
+ QList<SUIT_ViewWindow*> wndList = SMESHGUI::desktop()->windows();
+ SUIT_ViewWindow* wnd;
+ foreach(wnd, wndList)
+ SMESH::UpdateActorsAfterUpdateStudy(wnd);
+ }
+ }
+ }
+ }
+ }
+ }
+
+ //================================================================================
+ /*!
+ * \brief Return true if a mesh icon == ICON_SMESH_TREE_GEOM_MODIF
+ * which means that the mesh can't be modified. It should be either re-computed
+ * or breakShaperLink()'ed. Warn the user about it.
+ */
+ //================================================================================
+
+ bool warnOnGeomModif()
+ {
+ SALOME_ListIO selected;
+ if ( LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr() )
+ aSel->selectedObjects(selected,"",/*convertReferences=*/false);
+
+ SALOME_ListIteratorOfListIO It( selected );
+ for ( ; It.More(); It.Next() )
+ {
+ Handle(SALOME_InteractiveObject) io = It.Value();
+ if ( !io->hasEntry() ) continue;
+ _PTR(SObject) so = SMESH::getStudy()->FindObjectID( io->getEntry() );
+ SMESH::SMESH_Mesh_var mesh;
+ while ( mesh->_is_nil() && so && so->GetID() != "0:" )
+ {
+ CORBA::Object_var obj = SMESH::SObjectToObject( so );
+ SMESH::SMESH_IDSource_var isrc = SMESH::SMESH_IDSource::_narrow( obj );
+ if ( isrc->_is_nil() )
+ so = so->GetFather();
+ else
+ mesh = isrc->GetMesh();
+ }
+ if ( mesh->_is_nil() ) continue;
+ so = SMESH::FindSObject( mesh );
+ if ( !so ) continue;
+ _PTR(GenericAttribute) attr;
+ so->FindAttribute( attr, "AttributePixMap" );
+ _PTR(AttributePixMap) pixmap = attr;
+ if ( !pixmap ) continue;
+
+ if ( pixmap->GetPixMap() == "ICON_SMESH_TREE_GEOM_MODIF" )
+ {
+ SUIT_MessageBox::warning(SMESHGUI::desktop(),
+ QObject::tr("SMESH_WRN_WARNING"),
+ QObject::tr("MSG_WARN_ON_GEOM_MODIF"));
+ return true;
+ }
+ }
+ return false;
+ }
+
void SetDisplayMode(int theCommandID, VTK::MarkerMap& theMarkerMap)
{
SALOME_ListIO selected;
presentEntities = presentEntities | SMESH_Actor::e0DElements;
if ( !(presentEntities & SMESH_Actor::eBallElem) && anActor->GetObject()->GetNbEntities( SMDSAbs_Ball ) )
presentEntities = presentEntities | SMESH_Actor::eBallElem;
-
+
// as we know that all types of elements are present, we can exit the loop
if ( presentEntities == SMESH_Actor::eAllEntity )
break;
dlg.setShrinkCoef( int( shrinkCoef * 100. ) );
// hide unused controls
dlg.showControls( presentEntities, hasNodes );
-
+
if ( dlg.exec() ) {
nodeColor = dlg.nodeColor();
markerType = dlg.nodeMarkerType();
if ( !IObject->hasEntry() ) continue;
SMESH_Actor* anActor = SMESH::FindActorByEntry( IObject->getEntry() );
if ( !anActor ) continue;
-
+
// nodes: color, marker
anActor->SetNodeColor( nodeColor.redF(), nodeColor.greenF(), nodeColor.blueF() );
if ( markerType != VTK::MT_USER ) {
aColor = nodeColor; break;
case SMESH::EDGE:
aColor = edgeColor; break;
- case SMESH::FACE:
+ case SMESH::FACE:
aColor = faceColor; break;
case SMESH::VOLUME:
aColor = volumeColor; break;
- case SMESH::ELEM0D:
+ case SMESH::ELEM0D:
aColor = elem0dColor; break;
- case SMESH::BALL:
+ case SMESH::BALL:
aColor = ballColor; break;
default: break;
}
-
+
if ( aColor.isValid() ) {
SALOMEDS::Color aGroupColor;
aGroupColor.R = aColor.redF();
ActionControl.Bind( SMESHOp::OpMaxElementLength2D, SMESH_Actor::eMaxElementLength2D );
ActionControl.Bind( SMESHOp::OpEqualFace, SMESH_Actor::eCoincidentElems2D );
ActionControl.Bind( SMESHOp::OpAspectRatio3D, SMESH_Actor::eAspectRatio3D );
+ ActionControl.Bind( SMESHOp::OpWarping3D, SMESH_Actor::eWarping3D );
ActionControl.Bind( SMESHOp::OpVolume, SMESH_Actor::eVolume3D );
+ ActionControl.Bind( SMESHOp::OpScaledJacobian, SMESH_Actor::eScaledJacobian );
ActionControl.Bind( SMESHOp::OpMaxElementLength3D, SMESH_Actor::eMaxElementLength3D );
ActionControl.Bind( SMESHOp::OpBareBorderVolume, SMESH_Actor::eBareBorderVolume );
ActionControl.Bind( SMESHOp::OpOverConstrainedVolume, SMESH_Actor::eOverConstrainedVolume );
if ( anActor->GetControlMode() != aControl )
anActor->SetControlMode( aControl );
QString functorName = functorToString( anActor->GetFunctor() );
- int anEntitiesCount = anActor->GetNumberControlEntities();
+ smIdType anEntitiesCount = anActor->GetNumberControlEntities();
if (anEntitiesCount >= 0)
functorName = functorName + ": " + QString::number(anEntitiesCount);
- anActor->GetScalarBarActor()->SetTitle( functorName.toLatin1().constData() );
+ anActor->GetScalarBarActor()->SetTitle( functorName.toUtf8().constData() );
SMESH::RepaintCurrentView();
#ifndef DISABLE_PLOT2DVIEWER
if ( anActor->GetPlot2Histogram() ) {
v = qMax( uint(0), qMin ( v, size-1 ) );
return v;
}
-
+
} //namespace
void SMESHGUI::OnEditDelete()
_PTR(GenericAttribute) anAttr;
_PTR(AttributeIOR) anIOR;
+ const int objectCountLimit = 30; // PAL23599
int objectCount = 0;
QString aNameList;
QString aParentComponent = QString::null;
-
+
for( SALOME_ListIteratorOfListIO anIt( selected ); anIt.More(); anIt.Next() )
{
Handle(SALOME_InteractiveObject) anIO = anIt.Value();
if ( anIO.IsNull() ) continue;
-
- QString father = "unknown";
+
+ QString father = "unknown", name;
_PTR(SObject) aSO = aStudy->FindObjectID( anIO->getEntry() );
if (aSO) {
father = QString::fromStdString( aSO->GetFatherComponent()->ComponentDataType() );
// check if object is reference
_PTR(SObject) aRefSObj;
- aNameList.append("\n - ");
if ( aSO->ReferencedObject( aRefSObj ) ) {
- QString aRefName = QString::fromStdString ( aRefSObj->GetName() );
- aNameList.append( aRefName );
+ name = QString::fromStdString ( aRefSObj->GetName() );
father = QString::fromStdString ( aRefSObj->GetFatherComponent()->ComponentDataType() );
}
else
- aNameList.append(anIO->getName());
+ name = anIO->getName();
objectCount++;
}
+ if ( objectCount < objectCountLimit ) { // avoid occupying the whole screen
+ aNameList.append("\n - ");
+ aNameList.append( name );
+ }
if( aParentComponent.isNull() )
aParentComponent = father;
else if( !aParentComponent.isEmpty() && aParentComponent!=father )
aParentComponent = "";
}
+ if ( objectCount >= objectCountLimit )
+ aNameList.append("\n - ...");
if ( objectCount == 0 )
return; // No Valid Objects Selected
SalomeApp_Application* anApp = dynamic_cast<SalomeApp_Application*>( SUIT_Session::session()->activeApplication() );
- // Put the whole hierarchy of sub-objects of the selected SO's into a list and
- // then treat them all starting from the deepest objects (at list back)
+ // Put one level of sub-objects of the selected SO's into a list
+ // in order to get objects inside folders like "Assigned Algorithms"
std::list< _PTR(SObject) > listSO;
SALOME_ListIteratorOfListIO It(selected);
for( ; It.More(); It.Next()) // loop on selected IO's
aSO = aRefSObject; // Delete main Object instead of reference
listSO.push_back( aSO );
- std::list< _PTR(SObject) >::iterator itSO = --listSO.end();
- for ( ; itSO != listSO.end(); ++itSO ) {
- _PTR(ChildIterator) it = aStudy->NewChildIterator( *itSO );
- for (it->InitEx(false); it->More(); it->Next())
- listSO.push_back( it->Value() );
- }
+
+ _PTR(ChildIterator) it = aStudy->NewChildIterator( aSO );
+ for (it->InitEx(false); it->More(); it->Next())
+ listSO.push_back( it->Value() );
}
}
// Check if none of objects to delete is referred from outside
std::list< _PTR(SObject) >::reverse_iterator ritSO;
+ std::vector< _PTR(SObject) > subSO;
for ( ritSO = listSO.rbegin(); ritSO != listSO.rend(); ++ritSO )
{
_PTR(SObject) SO = *ritSO;
if ( !SO ) continue;
- std::vector<_PTR(SObject)> aReferences = aStudy->FindDependances( *ritSO );
- for (size_t i = 0; i < aReferences.size(); i++) {
- _PTR(SComponent) aComponent = aReferences[i]->GetFatherComponent();
- std::string type = aComponent->ComponentDataType();
- if ( type != "SMESH" )
- {
- SUIT_MessageBox::warning( anApp->desktop(),
- QObject::tr("WRN_WARNING"),
- QObject::tr("DEP_OBJECT") );
- return; // outside SMESH, there is an object depending on a SMESH object
+
+ int nbChildren = SO->GetLastChildTag();
+ subSO.clear();
+ subSO.reserve( 1 + nbChildren );
+ subSO.push_back( SO );
+ if ( nbChildren > 0 )
+ {
+ _PTR(ChildIterator) it = aStudy->NewChildIterator( SO );
+ for ( it->InitEx( true ); it->More(); it->Next() )
+ subSO.push_back( it->Value() );
+ }
+ for ( size_t i = 0; i < subSO.size(); ++i )
+ {
+ std::vector<_PTR(SObject)> aReferences = aStudy->FindDependances( subSO[i] );
+ for ( size_t j = 0; j < aReferences.size(); j++ ) {
+ _PTR(SComponent) aComponent = aReferences[j]->GetFatherComponent();
+ std::string type = aComponent->ComponentDataType();
+ if ( type != "SMESH" )
+ {
+ SUIT_MessageBox::warning( anApp->desktop(),
+ QObject::tr("WRN_WARNING"),
+ QObject::tr("DEP_OBJECT") );
+ return; // outside SMESH, there is an object depending on a SMESH object
+ }
}
}
}
- // Call mesh->Clear() to prevent loading mesh from file caused by hypotheses removal
- for( It.Initialize( selected ); It.More(); It.Next()) // loop on selected IO's
- {
- Handle(SALOME_InteractiveObject) IObject = It.Value();
- SMESH::SMESH_Mesh_var mesh = SMESH::IObjectToInterface< SMESH::SMESH_Mesh >( IObject );
- if ( !mesh->_is_nil() )
- mesh->Clear();
- }
-
// Treat SO's in the list starting from the back
aStudyBuilder->NewCommand(); // There is a transaction
for ( ritSO = listSO.rbegin(); ritSO != listSO.rend(); ++ritSO )
std::string anEntry = SO->GetID();
/** Erase graphical object and remove all its data **/
- if(SO->FindAttribute(anAttr, "AttributeIOR")) {
+ if ( SO->FindAttribute( anAttr, "AttributeIOR" )) {
SMESH::RemoveVisualObjectWithActors( anEntry.c_str(), true);
}
/** Remove an object from data structures **/
aStudyBuilder->RemoveObjectWithChildren( SO );
}
else {// default action: remove SObject from the study
+ // Find Sub-Meshes and Group and delete corresopning visual objects and actors
+ _PTR(ChildIterator) it1 = aStudy->NewChildIterator(SO);
+ for (it1->InitEx(false); it1->More(); it1->Next()) {
+ _PTR(SObject) SObj = it1->Value();
+ if (!SObj) continue;
+ if (SObj->FindAttribute(anAttr, "AttributeIOR")) {
+ SMESH::SMESH_GroupBase_var aGroup = SMESH::SMESH_GroupBase::_narrow(SMESH::SObjectToObject(SObj));
+ SMESH::SMESH_subMesh_var aSubMesh = SMESH::SMESH_subMesh::_narrow(SMESH::SObjectToObject(SObj));
+ if (!aGroup->_is_nil() || !aSubMesh->_is_nil()) {
+ SMESH::RemoveVisualObjectWithActors(SObj->GetID().c_str(), true);
+ }
+ }
+ }
// san - it's no use opening a transaction here until UNDO/REDO is provided in SMESH
//SUIT_Operation *op = new SALOMEGUI_ImportOperation(myActiveStudy);
//op->start();
*
*/
//=============================================================================
-SMESHGUI::SMESHGUI() :
-SalomeApp_Module( "SMESH" )
+SMESHGUI::SMESHGUI() : SalomeApp_Module( "SMESH" )
{
if ( CORBA::is_nil( myComponentSMESH ) )
{
CORBA::Boolean anIsEmbeddedMode;
myComponentSMESH = SMESH_Client::GetSMESHGen(getApp()->orb(),anIsEmbeddedMode);
+
//MESSAGE("-------------------------------> anIsEmbeddedMode=" << anIsEmbeddedMode);
// 0019923: EDF 765 SMESH : default values of hypothesis
long updateLimit = resMgr->integerValue( "SMESH", "update_limit", 500000 );
bool incrementalLimit = resMgr->booleanValue( "SMESH", "incremental_limit", false );
- SMESH::long_array_var info = theMesh->GetMeshInfo();
+ SMESH::smIdType_array_var info = theMesh->GetMeshInfo();
long nbOdElems = info[SMDSEntity_0D];
long nbEdges = info[SMDSEntity_Edge] + info[SMDSEntity_Quad_Edge];
- long nbFaces = info[SMDSEntity_Triangle] + info[SMDSEntity_Quad_Triangle] + info[SMDSEntity_BiQuad_Triangle] +
- info[SMDSEntity_Quadrangle] + info[SMDSEntity_Quad_Quadrangle] + info[SMDSEntity_BiQuad_Quadrangle] +
+ long nbFaces = info[SMDSEntity_Triangle] + info[SMDSEntity_Quad_Triangle] + info[SMDSEntity_BiQuad_Triangle] +
+ info[SMDSEntity_Quadrangle] + info[SMDSEntity_Quad_Quadrangle] + info[SMDSEntity_BiQuad_Quadrangle] +
info[SMDSEntity_Polygon] + info[SMDSEntity_Quad_Polygon];
- long nbVolumes = info[SMDSEntity_Tetra] + info[SMDSEntity_Quad_Tetra] +
- info[SMDSEntity_Hexa] + info[SMDSEntity_Quad_Hexa] + info[SMDSEntity_TriQuad_Hexa] +
- info[SMDSEntity_Pyramid] + info[SMDSEntity_Quad_Pyramid] +
+ long nbVolumes = info[SMDSEntity_Tetra] + info[SMDSEntity_Quad_Tetra] +
+ info[SMDSEntity_Hexa] + info[SMDSEntity_Quad_Hexa] + info[SMDSEntity_TriQuad_Hexa] +
+ info[SMDSEntity_Pyramid] + info[SMDSEntity_Quad_Pyramid] +
info[SMDSEntity_Penta] + info[SMDSEntity_Quad_Penta] + info[SMDSEntity_BiQuad_Penta] +
- info[SMDSEntity_Polyhedra] +
+ info[SMDSEntity_Polyhedra] +
info[SMDSEntity_Hexagonal_Prism];
long nbBalls = info[SMDSEntity_Ball];
long requestedSize = nbOdElems + nbBalls + nbEdges + nbFaces + nbVolumes;
*nbElements = requestedSize;
-
+
*entities = SMESH_Actor::eAllEntity;
*hidden = 0;
SVTK_ViewWindow* vtkwnd = dynamic_cast<SVTK_ViewWindow*>( view );
//QAction* act = action( theCommandID );
+ bool logAction(false);
switch (theCommandID) {
case SMESHOp::OpDelete:
case SMESHOp::OpImportMED:
case SMESHOp::OpImportSTL:
case SMESHOp::OpImportCGNS:
- case SMESHOp::OpImportSAUV:
case SMESHOp::OpImportGMF:
+ case SMESHOp::OpImportMESHIO:
case SMESHOp::OpPopupImportDAT:
case SMESHOp::OpPopupImportUNV:
case SMESHOp::OpPopupImportMED:
case SMESHOp::OpPopupImportSTL:
case SMESHOp::OpPopupImportCGNS:
- case SMESHOp::OpPopupImportSAUV:
case SMESHOp::OpPopupImportGMF:
{
if(isStudyLocked()) break;
case SMESHOp::OpExportUNV:
case SMESHOp::OpExportSTL:
case SMESHOp::OpExportCGNS:
- case SMESHOp::OpExportSAUV:
case SMESHOp::OpExportGMF:
+ case SMESHOp::OpExportMESHIO:
case SMESHOp::OpPopupExportDAT:
case SMESHOp::OpPopupExportMED:
case SMESHOp::OpPopupExportUNV:
case SMESHOp::OpPopupExportSTL:
case SMESHOp::OpPopupExportCGNS:
- case SMESHOp::OpPopupExportSAUV:
case SMESHOp::OpPopupExportGMF:
{
::ExportMeshToFile(theCommandID);
#ifndef DISABLE_PLOT2DVIEWER
SMESH::ProcessIn2DViewers(anActor,SMESH::RemoveFrom2dViewer);
#endif
+ anActor->UpdateFilter();
}
}
}
OCC_CATCH_SIGNALS;
SMESH::UpdateView();
}
- catch (std::bad_alloc) { // PAL16774 (Crash after display of many groups)
+ catch (std::bad_alloc&) { // PAL16774 (Crash after display of many groups)
SMESH::OnVisuException();
}
catch (...) { // PAL16774 (Crash after display of many groups)
else
aSel->setSelectedObjects( to_process );
+ if ( vtkwnd && vtkwnd->GetRenderer() && !isStudyLocked() &&
+ ( theCommandID==SMESHOp::OpShow || theCommandID==SMESHOp::OpShowOnly ) )
+ vtkwnd->GetRenderer()->AdjustActors();
+
break;
}
break;
}
- case SMESHOp::OpCreateMesh:
- case SMESHOp::OpCreateSubMesh:
case SMESHOp::OpEditMeshOrSubMesh:
case SMESHOp::OpEditMesh:
case SMESHOp::OpEditSubMesh:
+ case SMESHOp::OpMeshOrder:
+ case SMESHOp::OpCreateSubMesh:
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
+ // fall through
+ case SMESHOp::OpCreateMesh:
case SMESHOp::OpCompute:
case SMESHOp::OpComputeSubMesh:
case SMESHOp::OpPreCompute:
case SMESHOp::OpEvaluate:
- case SMESHOp::OpMeshOrder:
+ case SMESHOp::OpShowErrors:
startOperation( theCommandID );
break;
+ case SMESHOp::OpRecompute:
+ {
+ if ( isStudyLocked() )
+ break;
+ SALOME_ListIO selected;
+ if ( LightApp_SelectionMgr *sel = selectionMgr() )
+ sel->selectedObjects( selected );
+ if ( selected.Extent() == 1 ) {
+ SMESH::SMESH_Mesh_var aMesh = SMESH::GetMeshByIO( selected.First() );
+ if ( !aMesh->_is_nil() )
+ aMesh->Clear();
+ startOperation( SMESHOp::OpCompute );
+ }
+ }
+ break;
case SMESHOp::OpCopyMesh:
{
+ logAction = true;
if (isStudyLocked()) break;
EmitSignalDeactivateDialog();
( new SMESHGUI_CopyMeshDlg( this ) )->show();
if ( isStudyLocked() )
break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
/*Standard_Boolean aRes;
SMESH::SMESH_Mesh_var aMesh = SMESH::IObjectToInterface<SMESH::SMESH_Mesh>(IObject);
if ( isStudyLocked() )
break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
EmitSignalDeactivateDialog();
SMESHGUI_MultiEditDlg* aDlg = NULL;
case SMESHOp::OpSmoothing:
{
if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if( vtkwnd ) {
EmitSignalDeactivateDialog();
( new SMESHGUI_SmoothingDlg( this ) )->show();
case SMESHOp::OpExtrusion:
{
if (isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if (vtkwnd) {
EmitSignalDeactivateDialog();
( new SMESHGUI_ExtrusionDlg ( this ) )->show();
case SMESHOp::OpExtrusionAlongAPath:
{
if (isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if (vtkwnd) {
EmitSignalDeactivateDialog();
( new SMESHGUI_ExtrusionAlongPathDlg( this ) )->show();
case SMESHOp::OpRevolution:
{
if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if( vtkwnd ) {
EmitSignalDeactivateDialog();
( new SMESHGUI_RevolutionDlg( this ) )->show();
{
if ( isStudyLocked() )
break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if ( vtkwnd )
{
EmitSignalDeactivateDialog();
}
break;
}
+ // Adaptation - begin
+#ifndef DISABLE_MG_ADAPT
+ case SMESHOp::OpMGAdapt:
+ {
+ if ( isStudyLocked() )
+ break;
+ EmitSignalDeactivateDialog();
+
+ SALOME::GenericObj_wrap< SMESH::MG_ADAPT > model = GetSMESHGen()->CreateMG_ADAPT();
+ bool isCreation = false;
+ ( new SMESHGUI_MG_ADAPTDRIVER( this, model, isCreation ))->show();
+ break;
+ }
+#endif
+#ifndef DISABLE_HOMARD_ADAPT
+ case SMESHOp::OpHomardAdapt:
+ {
+ if ( isStudyLocked() )
+ break;
+ EmitSignalDeactivateDialog();
+
+ SALOME::GenericObj_wrap< SMESHHOMARD::HOMARD_Gen > homardGen;
+ try {
+ homardGen = GetSMESHGen()->CreateHOMARD_ADAPT();
+ }
+ catch ( const SALOME::SALOME_Exception& S_ex ) {
+ SUIT_MessageBox::critical(SMESHGUI::desktop(),
+ QObject::tr("SMESH_ERROR"),
+ QObject::tr(S_ex.details.text.in()));
+ }
+ if (!homardGen->_is_nil()) {
+ SMESHGUI_HomardAdaptDlg *aDlg = new SMESHGUI_HomardAdaptDlg(homardGen);
+ aDlg->show();
+ }
+ break;
+ }
+#endif
+ // Adaptation - end
case SMESHOp::OpSplitBiQuadratic:
case SMESHOp::OpConvertMeshToQuadratic:
+ case SMESHOp::OpCreateDualMesh:
case SMESHOp::OpCreateBoundaryElements: // create 2D mesh from 3D
+ case SMESHOp::OpCreate2DElements: // create full 2D mesh from 3D
case SMESHOp::OpReorientFaces:
case SMESHOp::OpCreateGeometryGroup:
{
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
startOperation( theCommandID );
break;
}
}
if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
EmitSignalDeactivateDialog();
SMESH::SMESH_Mesh_var aMesh = SMESH::SMESH_Mesh::_nil();
}
if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
EmitSignalDeactivateDialog();
LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr();
try {
SMESH::SMESH_Mesh_var aMesh = aSubMesh->GetFather();
// get submesh elements list by types
- SMESH::long_array_var aNodes = aSubMesh->GetElementsByType(SMESH::NODE);
- SMESH::long_array_var aEdges = aSubMesh->GetElementsByType(SMESH::EDGE);
- SMESH::long_array_var aFaces = aSubMesh->GetElementsByType(SMESH::FACE);
- SMESH::long_array_var aVolumes = aSubMesh->GetElementsByType(SMESH::VOLUME);
+ SMESH::smIdType_array_var aNodes = aSubMesh->GetElementsByType(SMESH::NODE);
+ SMESH::smIdType_array_var aEdges = aSubMesh->GetElementsByType(SMESH::EDGE);
+ SMESH::smIdType_array_var aFaces = aSubMesh->GetElementsByType(SMESH::FACE);
+ SMESH::smIdType_array_var aVolumes = aSubMesh->GetElementsByType(SMESH::VOLUME);
// create group for each type o elements
QString aName = IObject->getName();
QStringList anEntryList;
}
if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
EmitSignalDeactivateDialog();
LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr();
if ( isStudyLocked() )
break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
EmitSignalDeactivateDialog();
{
if ( isStudyLocked() )
break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
EmitSignalDeactivateDialog();
SMESHGUI_GroupOpDlg* aDlg = new SMESHGUI_DimGroupDlg( this );
break;
}
+ case SMESHOp::OpFaceGroupsByEdges: // Create face groups separated by sharp edges
+ {
+ if ( isStudyLocked() )
+ break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
+
+ EmitSignalDeactivateDialog();
+ SMESHGUI_FaceGroupsSeparatedByEdgesDlg* aDlg = new SMESHGUI_FaceGroupsSeparatedByEdgesDlg( this );
+ aDlg->show();
+
+ break;
+ }
+
case SMESHOp::OpDeleteGroup: // Delete groups with their contents
{
if ( !vtkwnd )
SALOME_ListIteratorOfListIO It( selected );
for ( ; It.More(); It.Next() ) {
SMESHGUI_MeshInfoDlg* dlg = new SMESHGUI_MeshInfoDlg( SMESHGUI::desktop(), page );
- dlg->showInfo( It.Value() );
+ dlg->showInfo( It.Value() );
dlg->show();
}
}
case SMESHOp::OpEditHypothesis:
{
if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr();
SALOME_ListIO selected;
case SMESHOp::OpUnassign: // REMOVE HYPOTHESIS / ALGORITHMS
{
if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
SUIT_OverrideCursor wc;
LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr();
case SMESHOp::OpHexagonalPrism:
{
if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if ( vtkwnd ) {
EmitSignalDeactivateDialog();
SMDSAbs_EntityType type = SMDSEntity_Edge;
case SMESHOp::OpPolyhedron:
{
if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if ( vtkwnd ) {
EmitSignalDeactivateDialog();
( new SMESHGUI_CreatePolyhedralVolumeDlg( this ) )->show();
case SMESHOp::OpTriQuadraticHexahedron:
{
if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if ( vtkwnd ) {
EmitSignalDeactivateDialog();
SMDSAbs_EntityType type = SMDSEntity_Last;
case SMESHOp::OpRemoveNodes:
{
if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if ( vtkwnd ) {
EmitSignalDeactivateDialog();
( new SMESHGUI_RemoveNodesDlg( this ) )->show();
}
break;
}
+ case SMESHOp::OpRemoveNodeWithReconn:
+ {
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
+ startOperation( SMESHOp::OpRemoveNodeWithReconn );
+ break;
+ }
case SMESHOp::OpRemoveElements: // REMOVES ELEMENTS
{
if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if( vtkwnd ) {
EmitSignalDeactivateDialog();
( new SMESHGUI_RemoveElementsDlg( this ) )->show();
case SMESHOp::OpClearMesh: {
if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
SALOME_ListIO selected;
if( LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr() )
case SMESHOp::OpRemoveOrphanNodes:
{
if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
SALOME_ListIO selected;
if( LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr() )
aSel->selectedObjects( selected );
try {
SUIT_OverrideCursor wc;
SMESH::SMESH_MeshEditor_var aMeshEditor = aMesh->GetMeshEditor();
- int removed = aMeshEditor->RemoveOrphanNodes();
+ smIdType removed = aMeshEditor->RemoveOrphanNodes();
SUIT_MessageBox::information(SMESHGUI::desktop(),
tr("SMESH_INFORMATION"),
tr("NB_NODES_REMOVED").arg(removed));
case SMESHOp::OpRenumberingNodes:
{
if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if( vtkwnd ) {
EmitSignalDeactivateDialog();
( new SMESHGUI_RenumberingDlg( this, 0 ) )->show();
case SMESHOp::OpRenumberingElements:
{
if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if ( vtkwnd ) {
EmitSignalDeactivateDialog();
( new SMESHGUI_RenumberingDlg( this, 1 ) )->show();
}
case SMESHOp::OpTranslation:
{
+ logAction = true;
if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if ( vtkwnd ) {
EmitSignalDeactivateDialog();
( new SMESHGUI_TranslationDlg( this ) )->show();
}
case SMESHOp::OpRotation:
{
+ logAction = true;
if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if( vtkwnd ) {
EmitSignalDeactivateDialog();
( new SMESHGUI_RotationDlg( this ) )->show();
}
case SMESHOp::OpSymmetry:
{
+ logAction = true;
if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if(vtkwnd) {
EmitSignalDeactivateDialog();
( new SMESHGUI_SymmetryDlg( this ) )->show();
}
case SMESHOp::OpScale:
{
+ logAction = true;
if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if ( vtkwnd ) {
EmitSignalDeactivateDialog();
( new SMESHGUI_ScaleDlg( this ) )->show();
case SMESHOp::OpOffset:
{
+ logAction = true;
if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if ( vtkwnd ) {
EmitSignalDeactivateDialog();
( new SMESHGUI_OffsetDlg( this ) )->show();
case SMESHOp::OpSewing:
{
+ logAction = true;
if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if(vtkwnd) {
EmitSignalDeactivateDialog();
( new SMESHGUI_SewingDlg( this ) )->show();
case SMESHOp::OpMergeNodes:
{
if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if(vtkwnd) {
EmitSignalDeactivateDialog();
( new SMESHGUI_MergeDlg( this, 0 ) )->show();
case SMESHOp::OpMergeElements:
{
if (isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if (vtkwnd) {
EmitSignalDeactivateDialog();
( new SMESHGUI_MergeDlg( this, 1 ) )->show();
}
case SMESHOp::OpMoveNode: // MAKE MESH PASS THROUGH POINT
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
startOperation( SMESHOp::OpMoveNode );
break;
+ case SMESHOp::OpMoveNodeInteractive:
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
+ startOperation( SMESHOp::OpMoveNodeInteractive );
+ break;
+
+ case SMESHOp::OpSplitEdgeInteract:
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
+ startOperation( SMESHOp::OpSplitEdgeInteract );
+ break;
+
+ case SMESHOp::OpSplitFaceInteract:
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
+ startOperation( SMESHOp::OpSplitFaceInteract );
+ break;
+
case SMESHOp::OpDuplicateNodes:
{
if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if ( vtkwnd ) {
EmitSignalDeactivateDialog();
( new SMESHGUI_DuplicateNodesDlg( this ) )->show();
}
case SMESHOp::OpElem0DOnElemNodes: // 0D_ON_ALL_NODES
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
startOperation( SMESHOp::OpElem0DOnElemNodes );
break;
case SMESHOp::OpMaxElementLength2D:
case SMESHOp::OpEqualFace:
case SMESHOp::OpAspectRatio3D:
+ case SMESHOp::OpWarping3D:
case SMESHOp::OpVolume:
+ case SMESHOp::OpScaledJacobian:
case SMESHOp::OpMaxElementLength3D:
case SMESHOp::OpBareBorderVolume:
case SMESHOp::OpOverConstrainedVolume:
case SMESHOp::OpPropertiesVolume:
case SMESHOp::OpMinimumDistance:
case SMESHOp::OpBoundingBox:
+ case SMESHOp::OpAngle:
{
int page = SMESHGUI_MeasureDlg::MinDistance;
if ( theCommandID == SMESHOp::OpBoundingBox )
page = SMESHGUI_MeasureDlg::Area;
else if ( theCommandID == SMESHOp::OpPropertiesVolume )
page = SMESHGUI_MeasureDlg::Volume;
+ else if ( theCommandID == SMESHOp::OpAngle )
+ page = SMESHGUI_MeasureDlg::Angle;
EmitSignalDeactivateDialog();
SMESHGUI_MeasureDlg* dlg = new SMESHGUI_MeasureDlg( SMESHGUI::desktop(), page );
case SMESHOp::OpSortChild:
::sortChildren();
break;
+ case SMESHOp::OpBreakLink:
+ ::breakShaperLink();
+ break;
}
anApp->updateActions(); //SRN: To update a Save button in the toolbar
//updateObjBrowser();
+ if(logAction)
+ {
+ QAction* anAction = action( theCommandID );
+ CAM_Application::logStructuredUserEvent( "Mesh",
+ "Operation",
+ anAction->text(),
+ "activated" );
+ }
return true;
}
*
*/
//=============================================================================
-bool SMESHGUI::OnMousePress( QMouseEvent * pe, SUIT_ViewWindow * wnd )
+bool SMESHGUI::OnMousePress( QMouseEvent * /*pe*/, SUIT_ViewWindow * /*wnd*/ )
{
return false;
}
*
*/
//=============================================================================
-bool SMESHGUI::OnMouseMove( QMouseEvent * pe, SUIT_ViewWindow * wnd )
+bool SMESHGUI::OnMouseMove( QMouseEvent * /*pe*/, SUIT_ViewWindow * /*wnd*/ )
{
return true;
}
*
*/
//=============================================================================
-bool SMESHGUI::OnKeyPress( QKeyEvent * pe, SUIT_ViewWindow * wnd )
+bool SMESHGUI::OnKeyPress( QKeyEvent * /*pe*/, SUIT_ViewWindow * /*wnd*/ )
{
return true;
}
if ( !icon_id.isEmpty() )
pix = resMgr->loadPixmap( "SMESH", tr( icon_id.toLatin1().data() ) );
else
- pix = resMgr->loadPixmap( "SMESH", tr( QString( "ICO_%1" ).arg( po_id ).toLatin1().data() ), false );
+ pix = resMgr->loadPixmap( "SMESH", tr( QString( "ICON_%1" ).arg( po_id ).toLatin1().data() ), false );
if ( !pix.isNull() )
icon = QIcon( pix );
#ifdef WITH_CGNS
createSMESHAction( SMESHOp::OpImportCGNS, "IMPORT_CGNS" );
#endif
- createSMESHAction( SMESHOp::OpImportSAUV, "IMPORT_SAUV" );
createSMESHAction( SMESHOp::OpImportGMF, "IMPORT_GMF" );
+ createSMESHAction( SMESHOp::OpImportMESHIO, "IMPORT_MESHIO" );
createSMESHAction( SMESHOp::OpPopupImportUNV, "IMPORT_UNV");
createSMESHAction( SMESHOp::OpPopupImportMED, "IMPORT_MED");
createSMESHAction( SMESHOp::OpPopupImportSTL, "IMPORT_STL" );
#ifdef WITH_CGNS
createSMESHAction( SMESHOp::OpPopupImportCGNS, "IMPORT_CGNS" );
#endif
- createSMESHAction( SMESHOp::OpPopupImportSAUV, "IMPORT_SAUV" );
createSMESHAction( SMESHOp::OpPopupImportGMF, "IMPORT_GMF" );
createSMESHAction( SMESHOp::OpExportDAT, "DAT" );
#ifdef WITH_CGNS
createSMESHAction( SMESHOp::OpExportCGNS, "CGNS");
#endif
- createSMESHAction( SMESHOp::OpExportSAUV, "SAUV");
createSMESHAction( SMESHOp::OpExportGMF, "GMF" );
+ createSMESHAction( SMESHOp::OpExportMESHIO, "EXPORT_MESHIO" );
createSMESHAction( SMESHOp::OpPopupExportDAT, "DAT" );
createSMESHAction( SMESHOp::OpPopupExportMED, "MED" );
createSMESHAction( SMESHOp::OpPopupExportUNV, "UNV" );
#ifdef WITH_CGNS
createSMESHAction( SMESHOp::OpPopupExportCGNS, "CGNS");
#endif
- createSMESHAction( SMESHOp::OpPopupExportSAUV, "SAUV");
createSMESHAction( SMESHOp::OpPopupExportGMF, "GMF" );
createSMESHAction( SMESHOp::OpFileInformation, "FILE_INFO" );
createSMESHAction( SMESHOp::OpDelete, "DELETE", "ICON_DELETE", Qt::Key_Delete );
createSMESHAction( SMESHOp::OpCopyMesh, "COPY_MESH", "ICON_COPY_MESH" );
createSMESHAction( SMESHOp::OpCompute, "COMPUTE", "ICON_COMPUTE" );
createSMESHAction( SMESHOp::OpComputeSubMesh, "COMPUTE_SUBMESH", "ICON_COMPUTE" );
+ createSMESHAction( SMESHOp::OpRecompute, "RE_COMPUTE", "ICON_COMPUTE" );
createSMESHAction( SMESHOp::OpPreCompute, "PRECOMPUTE", "ICON_PRECOMPUTE" );
+ createSMESHAction( SMESHOp::OpShowErrors, "SHOW_ERRORS", "ICON_SHOW_ERRORS" );
createSMESHAction( SMESHOp::OpEvaluate, "EVALUATE", "ICON_EVALUATE" );
createSMESHAction( SMESHOp::OpMeshOrder, "MESH_ORDER", "ICON_MESH_ORDER");
createSMESHAction( SMESHOp::OpCreateGroup, "CREATE_GROUP", "ICON_CREATE_GROUP" );
createSMESHAction( SMESHOp::OpIntersectGroups, "INT_GROUP", "ICON_INTERSECT" );
createSMESHAction( SMESHOp::OpCutGroups, "CUT_GROUP", "ICON_CUT" );
createSMESHAction( SMESHOp::OpGroupUnderlyingElem, "UNDERLYING_ELEMS", "ICON_UNDERLYING_ELEMS" );
+ createSMESHAction( SMESHOp::OpFaceGroupsByEdges, "FACE_GROUPS_BY_EDGES", "ICON_FACE_GROUPS_BY_EDGES" );
createSMESHAction( SMESHOp::OpAddElemGroupPopup, "ADD_TO_GROUP" );
createSMESHAction( SMESHOp::OpRemoveElemGroupPopup, "REMOVE_FROM_GROUP" );
createSMESHAction( SMESHOp::OpDeleteGroup, "DEL_GROUP", "ICON_DEL_GROUP" );
createSMESHAction( SMESHOp::OpMaxElementLength2D, "MAX_ELEMENT_LENGTH_2D", "ICON_MAX_ELEMENT_LENGTH_2D", 0, true );
createSMESHAction( SMESHOp::OpEqualFace, "EQUAL_FACE", "ICON_EQUAL_FACE", 0, true );
createSMESHAction( SMESHOp::OpAspectRatio3D, "ASPECT_3D", "ICON_ASPECT_3D", 0, true );
+ createSMESHAction( SMESHOp::OpWarping3D, "WARP_3D", "ICON_WARP", 0, true);
createSMESHAction( SMESHOp::OpVolume, "VOLUME_3D", "ICON_VOLUME_3D", 0, true );
createSMESHAction( SMESHOp::OpMaxElementLength3D, "MAX_ELEMENT_LENGTH_3D", "ICON_MAX_ELEMENT_LENGTH_3D", 0, true );
createSMESHAction( SMESHOp::OpBareBorderVolume, "BARE_BORDER_VOLUME", "ICON_BARE_BORDER_VOLUME", 0, true );
createSMESHAction( SMESHOp::OpOverConstrainedVolume, "OVER_CONSTRAINED_VOLUME", "ICON_OVER_CONSTRAINED_VOLUME", 0, true );
createSMESHAction( SMESHOp::OpEqualVolume, "EQUAL_VOLUME", "ICON_EQUAL_VOLUME", 0, true );
+ createSMESHAction( SMESHOp::OpScaledJacobian, "SCALED_JACOBIAN", "ICON_SCALED_JACOBIAN", 0, true );
createSMESHAction( SMESHOp::OpOverallMeshQuality, "OVERALL_MESH_QUALITY", "ICON_OVL_MESH_QUALITY" );
createSMESHAction( SMESHOp::OpNode, "NODE", "ICON_DLG_NODE" );
createSMESHAction( SMESHOp::OpRemoveNodes, "REMOVE_NODES", "ICON_DLG_REM_NODE" );
createSMESHAction( SMESHOp::OpRemoveElements, "REMOVE_ELEMENTS", "ICON_DLG_REM_ELEMENT" );
createSMESHAction( SMESHOp::OpRemoveOrphanNodes, "REMOVE_ORPHAN_NODES", "ICON_DLG_REM_ORPHAN_NODES" );
+ createSMESHAction( SMESHOp::OpRemoveNodeWithReconn, "REMOVE_NODE_RECON", "ICON_REM_NODE_RECON" );
createSMESHAction( SMESHOp::OpClearMesh, "CLEAR_MESH", "ICON_CLEAR_MESH" );
//createSMESHAction( SMESHOp::OpRenumberingNodes, "RENUM_NODES", "ICON_DLG_RENUMBERING_NODES" );
createSMESHAction( SMESHOp::OpMergeNodes, "MERGE", "ICON_SMESH_MERGE_NODES" );
createSMESHAction( SMESHOp::OpMergeElements, "MERGE_ELEMENTS", "ICON_DLG_MERGE_ELEMENTS" );
createSMESHAction( SMESHOp::OpMoveNode, "MESH_THROU_POINT","ICON_DLG_MOVE_NODE" );
+ createSMESHAction( SMESHOp::OpMoveNodeInteractive, "MOVE_NODE_INTRCT","ICON_DLG_MOVE_NODE_INTERACTIVE" );
+ createSMESHAction( SMESHOp::OpSplitEdgeInteract, "SPLIT_DIAG_INTRC","ICON_SPLIT_DIAG_INTERACTIVE" );
+ createSMESHAction( SMESHOp::OpSplitFaceInteract, "SPLIT_FACE_INTRC","ICON_SPLIT_FACE_INTERACTIVE" );
createSMESHAction( SMESHOp::OpDuplicateNodes, "DUPLICATE_NODES", "ICON_SMESH_DUPLICATE_NODES" );
createSMESHAction( SMESHOp::OpDiagonalInversion, "INV", "ICON_DLG_MESH_DIAGONAL" );
createSMESHAction( SMESHOp::OpUnionOfTwoTriangle, "UNION2", "ICON_UNION2TRI" );
createSMESHAction( SMESHOp::OpRevolution, "REVOLUTION", "ICON_REVOLUTION" );
createSMESHAction( SMESHOp::OpPatternMapping, "MAP", "ICON_MAP" );
createSMESHAction( SMESHOp::OpConvertMeshToQuadratic, "CONV_TO_QUAD", "ICON_CONV_TO_QUAD" );
+ createSMESHAction( SMESHOp::OpCreateDualMesh, "CREATE_DUAL_MESH","ICON_CREATE_DUAL_MESH" );
createSMESHAction( SMESHOp::OpCreateBoundaryElements, "2D_FROM_3D", "ICON_2D_FROM_3D" );
+ createSMESHAction( SMESHOp::OpCreate2DElements, "2D_FROM_3D_ELEMENTS","ICON_2D_FROM_3D_ELEMENTS" );
createSMESHAction( SMESHOp::OpReset, "RESET" );
createSMESHAction( SMESHOp::OpScalarBarProperties, "SCALAR_BAR_PROP" );
createSMESHAction( SMESHOp::OpAutoColor, "AUTO_COLOR" );
createSMESHAction( SMESHOp::OpDisableAutoColor, "DISABLE_AUTO_COLOR" );
+ // Adaptation - begin
+#ifndef DISABLE_MG_ADAPT
+ createSMESHAction( SMESHOp::OpMGAdapt, "MG_ADAPT", "ICON_MG_ADAPT" );
+#endif
+#ifndef DISABLE_HOMARD_ADAPT
+ createSMESHAction( SMESHOp::OpHomardAdapt, "HOMARD_ADAPT", "ICON_HOMARD_ADAPT" );
+#endif
+ // Adaptation - end
+
createSMESHAction( SMESHOp::OpMinimumDistance, "MEASURE_MIN_DIST", "ICON_MEASURE_MIN_DIST" );
createSMESHAction( SMESHOp::OpBoundingBox, "MEASURE_BND_BOX", "ICON_MEASURE_BND_BOX" );
createSMESHAction( SMESHOp::OpPropertiesLength, "MEASURE_LENGTH", "ICON_MEASURE_LENGTH" );
createSMESHAction( SMESHOp::OpPropertiesArea, "MEASURE_AREA", "ICON_MEASURE_AREA" );
createSMESHAction( SMESHOp::OpPropertiesVolume, "MEASURE_VOLUME", "ICON_MEASURE_VOLUME" );
+ createSMESHAction( SMESHOp::OpAngle, "MEASURE_ANGLE", "ICON_MEASURE_ANGLE" );
createSMESHAction( SMESHOp::OpHide, "HIDE", "ICON_HIDE" );
createSMESHAction( SMESHOp::OpShow, "SHOW", "ICON_SHOW" );
createSMESHAction( SMESHOp::OpSortChild, "SORT_CHILD_ITEMS" );
+ createSMESHAction( SMESHOp::OpBreakLink, "BREAK_SHAPER_LINK" );
+
QList<int> aCtrlActions;
aCtrlActions << SMESHOp::OpFreeNode << SMESHOp::OpEqualNode
<< SMESHOp::OpNodeConnectivityNb // node controls
<< SMESHOp::OpMinimumAngle << SMESHOp::OpWarpingAngle << SMESHOp::OpSkew
<< SMESHOp::OpMaxElementLength2D << SMESHOp::OpBareBorderFace
<< SMESHOp::OpOverConstrainedFace << SMESHOp::OpEqualFace // face controls
- << SMESHOp::OpAspectRatio3D << SMESHOp::OpVolume
+ << SMESHOp::OpAspectRatio3D << SMESHOp::OpVolume << SMESHOp::OpWarping3D
<< SMESHOp::OpMaxElementLength3D << SMESHOp::OpBareBorderVolume
- << SMESHOp::OpOverConstrainedVolume << SMESHOp::OpEqualVolume; // volume controls
+ << SMESHOp::OpOverConstrainedVolume << SMESHOp::OpEqualVolume << SMESHOp::OpScaledJacobian; // volume controls
QActionGroup* aCtrlGroup = new QActionGroup( application()->desktop() );
aCtrlGroup->setExclusive( true );
for( int i = 0; i < aCtrlActions.size(); i++ )
meshId = createMenu( tr( "MEN_MESH" ), -1, 70, 10 ),
ctrlId = createMenu( tr( "MEN_CTRL" ), -1, 60, 10 ),
modifyId = createMenu( tr( "MEN_MODIFY" ), -1, 40, 10 ),
+#if !defined(DISABLE_MG_ADAPT) || !defined(DISABLE_HOMARD_ADAPT)
+ adaptId = createMenu( tr( "MEN_ADAPT" ), -1, 80, 10 ),
+#endif
measureId = createMenu( tr( "MEN_MEASURE" ), -1, 50, 10 ),
viewId = createMenu( tr( "MEN_VIEW" ), -1, 2 );
transfId = createMenu( tr( "MEN_TRANSF" ), modifyId, 405 ),
basicPropId = createMenu( tr( "MEN_BASIC_PROPERTIES" ), measureId, -1, 10 );
+ // Import menu
//createMenu( SMESHOp::OpImportDAT, importId, -1 );
createMenu( SMESHOp::OpImportUNV, importId, -1 );
createMenu( SMESHOp::OpImportMED, importId, -1 );
#ifdef WITH_CGNS
createMenu( SMESHOp::OpImportCGNS, importId, -1 );
#endif
- createMenu( SMESHOp::OpImportSAUV, importId, -1 );
createMenu( SMESHOp::OpImportGMF, importId, -1 );
+ createMenu( SMESHOp::OpImportMESHIO, importId, -1 ); // formats supported by meshio lib
+
+ // Export menu
createMenu( SMESHOp::OpExportDAT, exportId, -1 );
createMenu( SMESHOp::OpExportMED, exportId, -1 );
createMenu( SMESHOp::OpExportUNV, exportId, -1 );
#ifdef WITH_CGNS
createMenu( SMESHOp::OpExportCGNS, exportId, -1 );
#endif
- createMenu( SMESHOp::OpExportSAUV, exportId, -1 );
createMenu( SMESHOp::OpExportGMF, exportId, -1 );
+ createMenu( SMESHOp::OpExportMESHIO, exportId, -1 ); // formats supported by meshio lib
createMenu( separator(), fileId, 10 );
createMenu( SMESHOp::OpDelete, editId, -1 );
createMenu( SMESHOp::OpEditMeshOrSubMesh, meshId, -1 );
createMenu( SMESHOp::OpBuildCompoundMesh, meshId, -1 );
createMenu( SMESHOp::OpCopyMesh, meshId, -1 );
+ createMenu( SMESHOp::OpCreateDualMesh, meshId, -1 );
createMenu( separator(), meshId, -1 );
createMenu( SMESHOp::OpCompute, meshId, -1 );
createMenu( SMESHOp::OpPreCompute, meshId, -1 );
createMenu( SMESHOp::OpCutGroups, meshId, -1 );
createMenu( separator(), meshId, -1 );
createMenu( SMESHOp::OpGroupUnderlyingElem, meshId, -1 );
+ createMenu( SMESHOp::OpFaceGroupsByEdges, meshId, -1 );
createMenu( separator(), meshId, -1 );
createMenu( SMESHOp::OpMeshInformation, meshId, -1 );
//createMenu( SMESHOp::OpStdInfo, meshId, -1 );
createMenu( SMESHOp::OpEqualFace, faceId, -1 );
createMenu( SMESHOp::OpDeflection2D, faceId, -1 );
createMenu( SMESHOp::OpAspectRatio3D, volumeId, -1 );
+ createMenu( SMESHOp::OpWarping3D, volumeId, -1 );
createMenu( SMESHOp::OpVolume, volumeId, -1 );
createMenu( SMESHOp::OpMaxElementLength3D, volumeId, -1 );
createMenu( SMESHOp::OpBareBorderVolume, volumeId, -1 );
createMenu( SMESHOp::OpOverConstrainedVolume, volumeId, -1 );
createMenu( SMESHOp::OpEqualVolume, volumeId, -1 );
+ createMenu( SMESHOp::OpScaledJacobian, volumeId, -1 );
createMenu( separator(), ctrlId, -1 );
createMenu( SMESHOp::OpReset, ctrlId, -1 );
createMenu( separator(), ctrlId, -1 );
createMenu( SMESHOp::OpBiQuadraticPentahedron, addId, -1 );
createMenu( SMESHOp::OpQuadraticHexahedron, addId, -1 );
createMenu( SMESHOp::OpTriQuadraticHexahedron, addId, -1 );
-
- createMenu( SMESHOp::OpRemoveNodes, removeId, -1 );
- createMenu( SMESHOp::OpRemoveElements, removeId, -1 );
- createMenu( SMESHOp::OpRemoveOrphanNodes, removeId, -1 );
- createMenu( separator(), removeId, -1 );
- createMenu( SMESHOp::OpDeleteGroup, removeId, -1 );
- createMenu( separator(), removeId, -1 );
- createMenu( SMESHOp::OpClearMesh, removeId, -1 );
+ createMenu( separator(), addId, -1 );
+ createMenu( SMESHOp::OpSplitEdgeInteract, addId, -1 );
+ createMenu( SMESHOp::OpSplitFaceInteract, addId, -1 );
+
+ createMenu( SMESHOp::OpRemoveNodes, removeId, -1 );
+ createMenu( SMESHOp::OpRemoveElements, removeId, -1 );
+ createMenu( SMESHOp::OpRemoveOrphanNodes, removeId, -1 );
+ createMenu( SMESHOp::OpRemoveNodeWithReconn, removeId, -1 );
+ createMenu( separator(), removeId, -1 );
+ createMenu( SMESHOp::OpDeleteGroup, removeId, -1 );
+ createMenu( separator(), removeId, -1 );
+ createMenu( SMESHOp::OpClearMesh, removeId, -1 );
//createMenu( SMESHOp::OpRenumberingNodes, renumId, -1 );
//createMenu( SMESHOp::OpRenumberingElements, renumId, -1 );
createMenu( SMESHOp::OpConvertMeshToQuadratic, modifyId, -1 );
createMenu( SMESHOp::OpCreateBoundaryElements, modifyId, -1 );
+ createMenu( SMESHOp::OpCreate2DElements, modifyId, -1 );
createMenu( SMESHOp::OpExtrusion, modifyId, -1 );
createMenu( SMESHOp::OpExtrusionAlongAPath, modifyId, -1 );
createMenu( SMESHOp::OpRevolution, modifyId, -1 );
createMenu( SMESHOp::OpSmoothing, modifyId, -1 );
createMenu( SMESHOp::OpPatternMapping, modifyId, -1 );
+ // Adaptation - begin
+#ifndef DISABLE_MG_ADAPT
+ createMenu( SMESHOp::OpMGAdapt, adaptId, -1 );
+#endif
+#ifndef DISABLE_HOMARD_ADAPT
+ createMenu( SMESHOp::OpHomardAdapt, adaptId, -1 );
+#endif
+ // Adaptation - end
+
createMenu( SMESHOp::OpMinimumDistance, measureId, -1 );
createMenu( SMESHOp::OpBoundingBox, measureId, -1 );
+ createMenu( SMESHOp::OpAngle, measureId, -1 );
createMenu( SMESHOp::OpPropertiesLength, basicPropId, -1 );
createMenu( SMESHOp::OpPropertiesArea, basicPropId, -1 );
createMenu( SMESHOp::OpPropertiesVolume, basicPropId, -1 );
connect( volumeMenu, SIGNAL( aboutToShow() ), this, SLOT( onUpdateControlActions() ) );
// ----- create toolbars --------------
- int meshTb = createTool( tr( "TB_MESH" ), QString( "SMESHMeshToolbar" ) ),
- info = createTool( tr( "TB_INFO" ), QString( "SMESHInformationToolbar" ) ),
- groupTb = createTool( tr( "TB_GROUP" ), QString( "SMESHGroupToolbar" ) ),
- ctrl0dTb = createTool( tr( "TB_CTRL0D" ), QString( "SMESHNodeControlsToolbar" ) ),
- ctrl1dTb = createTool( tr( "TB_CTRL1D" ), QString( "SMESHEdgeControlsToolbar" ) ),
- ctrl2dTb = createTool( tr( "TB_CTRL2D" ), QString( "SMESHFaceControlsToolbar" ) ),
- ctrl3dTb = createTool( tr( "TB_CTRL3D" ), QString( "SMESHVolumeControlsToolbar" ) ),
- addElemTb = createTool( tr( "TB_ADD" ), QString( "SMESHAddElementToolbar" ) ),
- addNonElemTb = createTool( tr( "TB_ADDNON" ), QString( "SMESHAddElementToolbar" ) ),
- remTb = createTool( tr( "TB_REM" ), QString( "SMESHRemoveToolbar" ) ),
- //renumbTb = createTool( tr( "TB_RENUMBER" ), QString( "SMESHRenumberingToolbar" ) ),
- transformTb = createTool( tr( "TB_TRANSFORM" ), QString( "SMESHTransformationToolbar" ) ),
- modifyTb = createTool( tr( "TB_MODIFY" ), QString( "SMESHModificationToolbar" ) ),
- measuremTb = createTool( tr( "TB_MEASUREM" ), QString( "SMESHMeasurementsToolbar" ) ),
- dispModeTb = createTool( tr( "TB_DISP_MODE" ), QString( "SMESHDisplayModeToolbar" ) );
-
+ int meshTb = createTool( tr( "TB_MESH" ), QString( "SMESHMeshToolbar" ) ) ;
createTool( SMESHOp::OpCreateMesh, meshTb );
createTool( SMESHOp::OpCreateSubMesh, meshTb );
createTool( SMESHOp::OpEditMeshOrSubMesh, meshTb );
createTool( SMESHOp::OpEvaluate, meshTb );
createTool( SMESHOp::OpMeshOrder, meshTb );
+ int infoTb = createTool( tr( "TB_INFO" ), QString( "SMESHInformationToolbar" ) ) ;
+ createTool( SMESHOp::OpMeshInformation, infoTb );
+ //createTool( SMESHOp::OpStdInfo, meshTb );
+ //createTool( SMESHOp::OpWhatIs, meshTb ); // VSR: issue #0021242 (eliminate "Mesh Element Information" command)
+ createTool( SMESHOp::OpFindElementByPoint, infoTb );
+
+ int groupTb = createTool( tr( "TB_GROUP" ), QString( "SMESHGroupToolbar" ) ) ;
createTool( SMESHOp::OpCreateGroup, groupTb );
createTool( SMESHOp::OpCreateGeometryGroup, groupTb );
createTool( SMESHOp::OpConstructGroup, groupTb );
createTool( SMESHOp::OpEditGroup, groupTb );
- createTool( SMESHOp::OpMeshInformation, info );
- //createTool( SMESHOp::OpStdInfo, meshTb );
- //createTool( SMESHOp::OpWhatIs, meshTb ); // VSR: issue #0021242 (eliminate "Mesh Element Information" command)
- createTool( SMESHOp::OpFindElementByPoint, info );
-
+ int ctrl0dTb = createTool( tr( "TB_CTRL0D" ), QString( "SMESHNodeControlsToolbar" ) ) ;
createTool( SMESHOp::OpFreeNode, ctrl0dTb );
createTool( SMESHOp::OpEqualNode, ctrl0dTb );
//createTool( SMESHOp::OpNodeConnectivityNb, ctrl0dTb );
+ int ctrl1dTb = createTool( tr( "TB_CTRL1D" ), QString( "SMESHEdgeControlsToolbar" ) ) ;
createTool( SMESHOp::OpFreeBorder, ctrl1dTb );
createTool( SMESHOp::OpLength, ctrl1dTb );
createTool( SMESHOp::OpConnection, ctrl1dTb );
createTool( SMESHOp::OpEqualEdge, ctrl1dTb );
+ int ctrl2dTb = createTool( tr( "TB_CTRL2D" ), QString( "SMESHFaceControlsToolbar" ) ) ;
createTool( SMESHOp::OpFreeEdge, ctrl2dTb );
createTool( SMESHOp::OpFreeFace, ctrl2dTb );
createTool( SMESHOp::OpBareBorderFace, ctrl2dTb );
createTool( SMESHOp::OpEqualFace, ctrl2dTb );
createTool( SMESHOp::OpDeflection2D, ctrl2dTb );
+ int ctrl3dTb = createTool( tr( "TB_CTRL3D" ), QString( "SMESHVolumeControlsToolbar" ) ) ;
createTool( SMESHOp::OpAspectRatio3D, ctrl3dTb );
+ createTool( SMESHOp::OpWarping3D, ctrl3dTb );
createTool( SMESHOp::OpVolume, ctrl3dTb );
createTool( SMESHOp::OpMaxElementLength3D, ctrl3dTb );
createTool( SMESHOp::OpBareBorderVolume, ctrl3dTb );
createTool( SMESHOp::OpOverConstrainedVolume, ctrl3dTb );
createTool( SMESHOp::OpEqualVolume, ctrl3dTb );
+ createTool( SMESHOp::OpScaledJacobian, ctrl3dTb );
+ int addElemTb = createTool( tr( "TB_ADD" ), QString( "SMESHAddElementToolbar" ) ) ;
createTool( SMESHOp::OpNode, addElemTb );
createTool( SMESHOp::OpElem0D, addElemTb );
createTool( SMESHOp::OpElem0DOnElemNodes, addElemTb );
createTool( SMESHOp::OpHexagonalPrism, addElemTb );
createTool( SMESHOp::OpPolyhedron, addElemTb );
+ int addNonElemTb = createTool( tr( "TB_ADDNON" ), QString( "SMESHAddElementToolbar" ) ) ;
createTool( SMESHOp::OpQuadraticEdge, addNonElemTb );
createTool( SMESHOp::OpQuadraticTriangle, addNonElemTb );
createTool( SMESHOp::OpBiQuadraticTriangle, addNonElemTb );
createTool( SMESHOp::OpQuadraticHexahedron, addNonElemTb );
createTool( SMESHOp::OpTriQuadraticHexahedron, addNonElemTb );
+ int remTb = createTool( tr( "TB_REM" ), QString( "SMESHRemoveToolbar" ) ) ;
createTool( SMESHOp::OpRemoveNodes, remTb );
createTool( SMESHOp::OpRemoveElements, remTb );
createTool( SMESHOp::OpRemoveOrphanNodes, remTb );
createTool( SMESHOp::OpClearMesh, remTb );
+// int renumbTb = createTool( tr( "TB_RENUMBER" ), QString( "SMESHRenumberingToolbar" ) ) ;
//createTool( SMESHOp::OpRenumberingNodes, renumbTb );
//createTool( SMESHOp::OpRenumberingElements, renumbTb );
+ int transformTb = createTool( tr( "TB_TRANSFORM" ), QString( "SMESHTransformationToolbar" ) ) ;
createTool( SMESHOp::OpMergeNodes, transformTb );
createTool( SMESHOp::OpMergeElements, transformTb );
createTool( SMESHOp::OpTranslation, transformTb );
createTool( SMESHOp::OpSewing, transformTb );
createTool( SMESHOp::OpDuplicateNodes, transformTb );
+ int modifyTb = createTool( tr( "TB_MODIFY" ), QString( "SMESHModificationToolbar" ) ) ;
createTool( SMESHOp::OpConvertMeshToQuadratic, modifyTb );
createTool( SMESHOp::OpCreateBoundaryElements, modifyTb );
+ createTool( SMESHOp::OpCreate2DElements, modifyTb );
createTool( SMESHOp::OpExtrusion, modifyTb );
createTool( SMESHOp::OpExtrusionAlongAPath, modifyTb );
createTool( SMESHOp::OpRevolution, modifyTb );
createTool( SMESHOp::OpSmoothing, modifyTb );
createTool( SMESHOp::OpPatternMapping, modifyTb );
+ int interactTb = createTool( tr( "TB_INTERACT" ), QString( "SMESHInteractiveToolbar" ) ) ;
+ createTool( SMESHOp::OpMoveNodeInteractive, interactTb );
+ createTool( SMESHOp::OpRemoveNodeWithReconn, interactTb );
+ createTool( SMESHOp::OpSplitEdgeInteract, interactTb );
+ createTool( SMESHOp::OpSplitFaceInteract, interactTb );
+
+ // Adaptation - begin
+#if !defined(DISABLE_MG_ADAPT) || !defined(DISABLE_HOMARD_ADAPT)
+ int adaptTb = createTool( tr( "TB_ADAPTATION" ), QString( "SMESHAdaptationToolbar" ) ) ;
+#endif
+#ifndef DISABLE_MG_ADAPT
+ createTool( SMESHOp::OpMGAdapt, adaptTb );
+#endif
+#ifndef DISABLE_HOMARD_ADAPT
+ createTool( SMESHOp::OpHomardAdapt, adaptTb );
+#endif
+ // Adaptation - end
+
+ int measuremTb = createTool( tr( "TB_MEASUREM" ), QString( "SMESHMeasurementsToolbar" ) ) ;
createTool( SMESHOp::OpMinimumDistance, measuremTb );
+ int dispModeTb = createTool( tr( "TB_DISP_MODE" ), QString( "SMESHDisplayModeToolbar" ) );
createTool( SMESHOp::OpUpdate, dispModeTb );
QString lc = "$"; // VSR : instead of QtxPopupSelection::defEquality();
hasVolumes("({'Volume'} in elemTypes)"),
hasFacesOrVolumes("(({'Face'} in elemTypes) || ({'Volume'} in elemTypes)) ");
- createPopupItem( SMESHOp::OpFileInformation, OB, mesh, "&& selcount=1 && isImported" );
- createPopupItem( SMESHOp::OpCreateSubMesh, OB, mesh, "&& hasGeomReference");
createPopupItem( SMESHOp::OpEditMesh, OB, mesh, "&& selcount=1" );
+ createPopupItem( SMESHOp::OpCreateSubMesh, OB, mesh, "&& hasGeomReference");
+ createPopupItem( SMESHOp::OpMeshOrder, OB, mesh, "&& selcount=1 && hasAlgo && hasGeomReference" );
createPopupItem( SMESHOp::OpEditSubMesh, OB, subMesh, "&& selcount=1 && hasGeomReference" );
createPopupItem( SMESHOp::OpEditGroup, OB, group );
createPopupItem( SMESHOp::OpEditGeomGroupAsGroup, OB, group, "&& groupType != 'Group'" );
popupMgr()->insert( separator(), -1, 0 );
- createPopupItem( SMESHOp::OpCompute, OB, mesh, "&& selcount=1 && isComputable" );
- createPopupItem( SMESHOp::OpComputeSubMesh, OB, subMesh, "&& selcount=1 && isComputable" );
- createPopupItem( SMESHOp::OpPreCompute, OB, mesh, "&& selcount=1 && isPreComputable" );
- createPopupItem( SMESHOp::OpEvaluate, OB, mesh, "&& selcount=1 && isComputable" );
- createPopupItem( SMESHOp::OpMeshOrder, OB, mesh, "&& selcount=1 && isComputable && hasGeomReference" );
- createPopupItem( SMESHOp::OpUpdate, OB, mesh_part );
+ createPopupItem( SMESHOp::OpCompute, OB, mesh, "&& selcount=1 && hasAlgo && isComputable" );
+ createPopupItem( SMESHOp::OpRecompute, OB, mesh, "&& selcount=1 && hasAlgo && (" + isNotEmpty + " || hasErrors )");
+ createPopupItem( SMESHOp::OpShowErrors, OB, mesh, "&& selcount=1 && hasErrors" );
+ createPopupItem( SMESHOp::OpComputeSubMesh, OB, subMesh, "&& selcount=1 && hasAlgo && isComputable" );
+ createPopupItem( SMESHOp::OpPreCompute, OB, mesh, "&& selcount=1 && hasAlgo && isPreComputable" );
+ createPopupItem( SMESHOp::OpEvaluate, OB, mesh, "&& selcount=1 && hasAlgo && isComputable" );
+ popupMgr()->insert( separator(), -1, 0 );
+ createPopupItem( SMESHOp::OpFileInformation, OB, mesh, "&& selcount=1 && isImported" );
createPopupItem( SMESHOp::OpMeshInformation, OB, mesh_part );
- createPopupItem( SMESHOp::OpFindElementByPoint,OB, mesh_group, "&& selcount=1" );
+ createPopupItem( SMESHOp::OpFindElementByPoint,OB, mesh_group, "&& selcount=1 && " + hasElems );
createPopupItem( SMESHOp::OpOverallMeshQuality,OB, mesh_part );
popupMgr()->insert( separator(), -1, 0 );
createPopupItem( SMESHOp::OpCreateGroup, OB, mesh, "&& selcount=1" );
createPopupItem( SMESHOp::OpEditHypothesis, OB, hypo, "&& isEditableHyp");
createPopupItem( SMESHOp::OpUnassign, OB, hyp_alg );
popupMgr()->insert( separator(), -1, 0 );
- createPopupItem( SMESHOp::OpConvertMeshToQuadratic, OB, mesh_submesh );
+ createPopupItem( SMESHOp::OpConvertMeshToQuadratic, OB, mesh_submesh, "&& " + hasElems );
createPopupItem( SMESHOp::OpCreateBoundaryElements, OB, mesh_group, "&& selcount=1 && dim>=2");
+
+ // Adaptation - begin
+ popupMgr()->insert( separator(), -1, 0 );
+#ifndef DISABLE_MG_ADAPT
+ createPopupItem( SMESHOp::OpMGAdapt, OB, mesh );
+#endif
+#ifndef DISABLE_HOMARD_ADAPT
+ createPopupItem( SMESHOp::OpHomardAdapt, OB, mesh );
+#endif
popupMgr()->insert( separator(), -1, 0 );
- createPopupItem( SMESHOp::OpClearMesh, OB, mesh );
- //popupMgr()->insert( separator(), -1, 0 );
+ // Adaptation - end
QString only_one_non_empty = QString( " && %1=1 && numberOfNodes>0" ).arg( dc );
QString multiple_non_empty = QString( " && %1>0 && numberOfNodes>0" ).arg( dc );
QString only_one_2D = only_one_non_empty + " && dim>1";
int anId = popupMgr()->insert( tr( "MEN_EXPORT" ), -1, -1 ); // EXPORT submenu
+ popupMgr()->findMenu( anId )->menuAction()->setIcon( resourceMgr()->loadPixmap( "SMESH", tr( "ICON_EXPORT" )));
createPopupItem( SMESHOp::OpPopupExportMED, OB, mesh_group, multiple_non_empty, anId );
createPopupItem( SMESHOp::OpPopupExportUNV, OB, mesh_group, only_one_non_empty, anId );
createPopupItem( SMESHOp::OpPopupExportSTL, OB, mesh_group, only_one_2D, anId );
#ifdef WITH_CGNS
createPopupItem( SMESHOp::OpPopupExportCGNS, OB, mesh_group, multiple_non_empty, anId );
#endif
- createPopupItem( SMESHOp::OpPopupExportSAUV, OB, mesh_group, only_one_non_empty, anId );
createPopupItem( SMESHOp::OpPopupExportGMF, OB, mesh_group, only_one_non_empty, anId );
createPopupItem( SMESHOp::OpPopupExportDAT, OB, mesh_group, only_one_non_empty, anId );
- createPopupItem( SMESHOp::OpDelete, OB, mesh_part + " " + hyp_alg );
- createPopupItem( SMESHOp::OpDeleteGroup, OB, group );
+ createPopupItem( SMESHOp::OpExportMESHIO, OB, mesh_group, only_one_non_empty, anId );
anId = popupMgr()->insert( tr( "MEN_IMPORT" ), -1, -1 ); // IMPORT submenu
createPopupItem( SMESHOp::OpPopupImportMED, OB, smesh, "", anId );
#ifdef WITH_CGNS
createPopupItem( SMESHOp::OpPopupImportCGNS, OB, smesh, "", anId );
#endif
- createPopupItem( SMESHOp::OpPopupImportSAUV, OB, smesh, "", anId );
createPopupItem( SMESHOp::OpPopupImportGMF, OB, smesh, "", anId );
createPopupItem( SMESHOp::OpPopupImportDAT, OB, smesh, "", anId );
popupMgr()->insert( separator(), -1, 0 );
+ createPopupItem( SMESHOp::OpClearMesh, OB, mesh );
+ createPopupItem( SMESHOp::OpDelete, OB, mesh_part + " " + hyp_alg );
+ createPopupItem( SMESHOp::OpDeleteGroup, OB, group );
+
// popup for viewer
createPopupItem( SMESHOp::OpEditGroup, View, group );
createPopupItem( SMESHOp::OpAddElemGroupPopup, View, elems, "&& guiState = 800" );
createPopupItem( SMESHOp::OpRemoveElemGroupPopup, View, elems, "&& guiState = 800" );
popupMgr()->insert( separator(), -1, 0 );
- createPopupItem( SMESHOp::OpUpdate, View, mesh_part );
createPopupItem( SMESHOp::OpMeshInformation, View, mesh_part );
createPopupItem( SMESHOp::OpOverallMeshQuality, View, mesh_part );
- createPopupItem( SMESHOp::OpFindElementByPoint, View, mesh );
+ createPopupItem( SMESHOp::OpFindElementByPoint, View, mesh, "&& " + hasElems);
popupMgr()->insert( separator(), -1, 0 );
+ createPopupItem( SMESHOp::OpUpdate, OB + " " + View, mesh_part );
createPopupItem( SMESHOp::OpAutoColor, OB + " " + View, mesh, "&& (not isAutoColor)" );
createPopupItem( SMESHOp::OpDisableAutoColor, OB + " " + View, mesh, "&& isAutoColor" );
popupMgr()->insert( separator(), -1, 0 );
popupMgr()->setRule( action( SMESHOp::OpAspectRatio3D ), aMeshInVtkHasVolumes, QtxPopupMgr::VisibleRule );
popupMgr()->setRule( action( SMESHOp::OpAspectRatio3D ), "controlMode = 'eAspectRatio3D'", QtxPopupMgr::ToggleRule );
+ popupMgr()->insert ( action( SMESHOp::OpWarping3D ), aSubId, -1 );
+ popupMgr()->setRule( action( SMESHOp::OpWarping3D ), aMeshInVtkHasVolumes, QtxPopupMgr::VisibleRule );
+ popupMgr()->setRule( action( SMESHOp::OpWarping3D), "controlMode = 'eWarping3D'", QtxPopupMgr::ToggleRule );
+
popupMgr()->insert ( action( SMESHOp::OpVolume ), aSubId, -1 );
popupMgr()->setRule( action( SMESHOp::OpVolume ), aMeshInVtkHasVolumes, QtxPopupMgr::VisibleRule );
popupMgr()->setRule( action( SMESHOp::OpVolume ), "controlMode = 'eVolume3D'", QtxPopupMgr::ToggleRule );
popupMgr()->setRule( action( SMESHOp::OpEqualVolume ), aMeshInVtkHasVolumes, QtxPopupMgr::VisibleRule );
popupMgr()->setRule( action( SMESHOp::OpEqualVolume ), "controlMode = 'eCoincidentElems3D'", QtxPopupMgr::ToggleRule );
+ popupMgr()->insert ( action( SMESHOp::OpScaledJacobian ), aSubId, -1 );
+ popupMgr()->setRule( action( SMESHOp::OpScaledJacobian ), aMeshInVtkHasVolumes, QtxPopupMgr::VisibleRule );
+ popupMgr()->setRule( action( SMESHOp::OpScaledJacobian ), "controlMode = 'eScaledJacobian'", QtxPopupMgr::ToggleRule );
+
popupMgr()->insert( separator(), anId, -1 );
popupMgr()->insert( action( SMESHOp::OpShowScalarBar ), anId, -1 );
popupMgr()->setRule( action( SMESHOp::OpSortChild ), "$component={'SMESH'} and client='ObjectBrowser' and isContainer and nbChildren>1", QtxPopupMgr::VisibleRule );
popupMgr()->insert( separator(), -1, -1 );
+ popupMgr()->insert( action( SMESHOp::OpBreakLink), -1, -1 );
+ popupMgr()->setRule( action( SMESHOp::OpBreakLink), "$component={'SHAPERSTUDY'} and client='ObjectBrowser' and canBreakLink", QtxPopupMgr::VisibleRule );
+
connect( application(), SIGNAL( viewManagerActivated( SUIT_ViewManager* ) ),
this, SLOT( onViewManagerActivated( SUIT_ViewManager* ) ) );
SALOME_ListIteratorOfListIO It( selected );
for ( ; isCompatible && It.More(); It.Next())
isCompatible =
- ( strcmp("GEOM", It.Value()->getComponentDataType()) == 0 ) ||
- ( strcmp("SMESH", It.Value()->getComponentDataType()) == 0 );
+ ( strcmp("GEOM", It.Value()->getComponentDataType()) == 0 ) ||
+ ( strcmp("SHAPERSTUDY", It.Value()->getComponentDataType()) == 0 ) ||
+ ( strcmp("SMESH", It.Value()->getComponentDataType()) == 0 );
return isCompatible;
}
bool SMESHGUI::reusableOperation( const int id )
{
// compute, evaluate and precompute are not reusable operations
- return ( id == SMESHOp::OpCompute || id == SMESHOp::OpPreCompute || id == SMESHOp::OpEvaluate ) ? false : SalomeApp_Module::reusableOperation( id );
+ return ( id == SMESHOp::OpCompute || id == SMESHOp::OpPreCompute || id == SMESHOp::OpEvaluate || id == SMESHOp::OpRecompute ) ? false : SalomeApp_Module::reusableOperation( id );
+}
+
+namespace
+{
+ QString wrap(const QString& text, const QString& tag)
+ { return QString("<%1>%2</%3>").arg(tag).arg(text).arg(tag);}
}
bool SMESHGUI::activateModule( SUIT_Study* study )
setMenuShown( true );
setToolShown( true );
+ // Fill in Help Panel
+ SalomeApp_Application* app = dynamic_cast<SalomeApp_Application*>( application() );
+ app->infoPanel()->setTitle(tr("INFO_WELCOME_TO_SMESH"));
+
+ int gb = app->infoPanel()->addGroup(tr("INFO_GRP_CREATE_MESH"));
+ QString lab;
+ QStringList items;
+ lab = tr("INFO_DEFINE_ALGOS") + "<br/>";
+ lab = lab + tr("INFO_DEFINE_HYPOS") + "<br/>";
+ lab = lab + tr("INFO_COMPUTE") + "<br/>";
+ lab = lab + tr("INFO_REFINE") + ":";
+ items << wrap(tr("INFO_REFINE_LOCAL_SIZE"), "li")
+ << wrap(tr("INFO_REFINE_SUBMESH"), "li");
+ lab = lab + wrap(items.join(""), "ul");
+ items.clear();
+
+ app->infoPanel()->addLabel(lab, gb);
+
+ gb = app->infoPanel()->addGroup(tr("INFO_GRP_IMPORT_MESH"));
+ items << wrap("UNV", "li")
+ << wrap("MED", "li")
+ << wrap("STL", "li")
+ << wrap("CGNS", "li")
+ << wrap("GMF", "li");
+ lab = tr("INFO_AVAILABLE_FORMATS") + ":" + wrap(items.join(""), "ul");
+ items.clear();
+
+ app->infoPanel()->addLabel(lab, gb);
+
+ gb = app->infoPanel()->addGroup(tr("INFO_GRP_CHECK_MESH"));
+ lab = tr("INFO_DISPLAY") + "<br/>";
+ items << wrap(tr("INFO_QUALITY_AREA"), "li")
+ << wrap(tr("INFO_QUALITY_VOLUME"), "li")
+ << wrap(tr("INFO_QUALITY_ASPECT_RATION"), "li")
+ << wrap("...", "li");
+ lab = lab + tr("INFO_QUALITY_INFO") + ":" + wrap(items.join(""), "ul");
+ items.clear();
+ lab = lab + tr("INFO_CLIPPING");
+
+ app->infoPanel()->addLabel(lab, gb);
+ // << Help Panel
+
// import Python module that manages SMESH plugins (need to be here because SalomePyQt API uses active module)
PyGILState_STATE gstate = PyGILState_Ensure();
PyObject* pluginsmanager = PyImport_ImportModuleNoBlock((char*)"salome_pluginsmanager");
QList<SUIT_ViewWindow*> wndList = aDesk->windows();
SUIT_ViewWindow* wnd;
foreach ( wnd, wndList )
+ {
connectView( wnd );
+
+ // remove actors whose objects are removed in GetSMESHGen()->UpdateStudy()
+ SMESH::UpdateActorsAfterUpdateStudy(wnd);
+
+ wnd->update();
+ }
}
Py_XDECREF(pluginsmanager);
_PTR(Study) study = appStudy->studyDS();
_PTR(SObject) obj = study->FindObjectID( io->getEntry() );
if ( obj ) {
- QString aName = QString( SMESH::fromUtf8(obj->GetName()) );
- while ( aName.at( aName.length() - 1 ) == ' ' ) // Remove extraspaces in Name of Popup
- aName.remove( (aName.length() - 1), 1 );
+ QString aName = SMESH::fromUtf8( obj->GetName());
+ while ( !aName.isEmpty() && aName.at( aName.length() - 1 ) == ' ' ) // Remove extraspaces in Name of Popup
+ aName.remove(( aName.length() - 1 ), 1 );
title = aName;
}
}
{
aMap.insert( SalomeApp_Application::WT_ObjectBrowser, Qt::LeftDockWidgetArea );
aMap.insert( SalomeApp_Application::WT_NoteBook, Qt::LeftDockWidgetArea );
+ aMap.insert( SalomeApp_Application::WT_InfoPanel, Qt::RightDockWidgetArea);
#ifndef DISABLE_PYCONSOLE
aMap.insert( SalomeApp_Application::WT_PyConsole, Qt::BottomDockWidgetArea );
#endif
void SMESHGUI::ProcessEvents( vtkObject* theObject,
unsigned long theEvent,
void* theClientData,
- void* theCallData )
+ void* /*theCallData*/ )
{
if( SMESHGUI* aSMESHGUI = reinterpret_cast<SMESHGUI*>( theClientData ) ) {
if( theObject && (int) theEvent == SMESH::DeleteActorEvent ) {
int dispgroup = addPreference( tr( "PREF_DISPLAY_MODE_GROUP" ), genTab );
setPreferenceProperty( dispgroup, "columns", 2 );
+
+ addPreference( tr( "PREF_FITALL_ON_DISPLAYONLY" ), dispgroup, LightApp_Preferences::Bool, "SMESH", "fitall_on_displayonly" );
+
int dispmode = addPreference( tr( "PREF_DISPLAY_MODE" ), dispgroup, LightApp_Preferences::Selector, "SMESH", "display_mode" );
QStringList modes;
modes.append( tr("MEN_WIRE") );
setPreferenceProperty( exportgroup, "columns", 2 );
addPreference( tr( "PREF_AUTO_GROUPS" ), exportgroup, LightApp_Preferences::Bool, "SMESH", "auto_groups" );
addPreference( tr( "PREF_SHOW_WARN" ), exportgroup, LightApp_Preferences::Bool, "SMESH", "show_warning" );
+ addPreference( tr( "PREF_MED_SAVE_NUMS" ), exportgroup, LightApp_Preferences::Bool, "SMESH", "med_save_numbers" );
+ int zTol = addPreference( tr( "PREF_ZTOLERANCE" ), exportgroup, LightApp_Preferences::DblSpin, "SMESH", "med_ztolerance" );
+ setPreferenceProperty( zTol, "precision", 10 );
+ setPreferenceProperty( zTol, "min", 0.0000000001 );
+ setPreferenceProperty( zTol, "max", 1000000.0 );
+ setPreferenceProperty( zTol, "step", 1. );
//addPreference( tr( "PREF_RENUMBER" ), exportgroup, LightApp_Preferences::Bool, "SMESH", "renumbering" );
int computeGroup = addPreference( tr( "PREF_GROUP_COMPUTE" ), genTab );
"SMESH", "nb_segments_per_edge" );
setPreferenceProperty( nbSeg, "min", 1 );
setPreferenceProperty( nbSeg, "max", 10000000 );
+ addPreference( tr( "PREF_USE_MESHGEMS_HYPOSET" ), segGroup, LightApp_Preferences::Bool, "SMESH", "use-meshgems-hypo-sets" );
int loadGroup = addPreference( tr( "SMESH_PREF_MESH_LOADING" ), genTab );
addPreference( tr( "PREF_FORGET_MESH_AT_HYP_MODIF" ), loadGroup, LightApp_Preferences::Bool,
int size0d = addPreference(tr("PREF_SIZE_0D"), elemGroup,
LightApp_Preferences::IntSpin, "SMESH", "elem0d_size");
/* int ballSize = addPreference(tr("PREF_BALL_SIZE"), elemGroup,
- LightApp_Preferences::IntSpin, "SMESH", "ball_elem_size"); */
- double ballDiameter = addPreference(tr("PREF_BALL_DIAMETER"), elemGroup,
- LightApp_Preferences::DblSpin, "SMESH", "ball_elem_diameter");
- double ballScale = addPreference(tr("PREF_BALL_SCALE"), elemGroup,
- LightApp_Preferences::DblSpin, "SMESH", "ball_elem_scale");
- int elemW = addPreference(tr("PREF_WIDTH"), elemGroup,
- LightApp_Preferences::IntSpin, "SMESH", "element_width");
- int outW = addPreference(tr("PREF_OUTLINE_WIDTH"), elemGroup,
- LightApp_Preferences::IntSpin, "SMESH", "outline_width");
- int shrink = addPreference(tr("PREF_SHRINK_COEFF"), elemGroup,
- LightApp_Preferences::IntSpin, "SMESH", "shrink_coeff");
+ LightApp_Preferences::IntSpin, "SMESH", "ball_elem_size"); */
+ int ballDiameter = addPreference(tr("PREF_BALL_DIAMETER"), elemGroup,
+ LightApp_Preferences::DblSpin, "SMESH", "ball_elem_diameter");
+ int ballScale = addPreference(tr("PREF_BALL_SCALE"), elemGroup,
+ LightApp_Preferences::DblSpin, "SMESH", "ball_elem_scale");
+ int elemW = addPreference(tr("PREF_WIDTH"), elemGroup,
+ LightApp_Preferences::IntSpin, "SMESH", "element_width");
+ int outW = addPreference(tr("PREF_OUTLINE_WIDTH"), elemGroup,
+ LightApp_Preferences::IntSpin, "SMESH", "outline_width");
+ int shrink = addPreference(tr("PREF_SHRINK_COEFF"), elemGroup,
+ LightApp_Preferences::IntSpin, "SMESH", "shrink_coeff");
setPreferenceProperty( size0d, "min", 1 );
setPreferenceProperty( size0d, "max", 10 );
- // setPreferenceProperty( ballSize, "min", 1 );
- // setPreferenceProperty( ballSize, "max", 10 );
+ // setPreferenceProperty( ballSize, "min", 1 );
+ // setPreferenceProperty( ballSize, "max", 10 );
setPreferenceProperty( ballDiameter, "min", 1e-7 );
setPreferenceProperty( ballDiameter, "max", 1e9 );
int numGroup = addPreference( tr( "PREF_GROUP_NUMBERING" ), meshTab );
setPreferenceProperty( numGroup, "columns", 2 );
-
+
addPreference( tr( "PREF_NUMBERING_NODE" ), numGroup, LightApp_Preferences::Color, "SMESH", "numbering_node_color" );
addVtkFontPref( tr( "PREF_NUMBERING_FONT" ), numGroup, "numbering_node_font", true );
setPreferenceProperty( coloringType, "indexes", indices );
addPreference( tr( "SMESH_DISTRIBUTION_COLOR" ), distributionGr, LightApp_Preferences::Color, "SMESH", "distribution_color" );
+ // Adaptation - begin
+#ifndef DISABLE_MG_ADAPT
+ // Adaptation tab ------------------------------------------------------------------------
+ int adaptTab = addPreference( tr( "ADAPT_PREF_TAB_GENERAL" ) );
+ int bloc, pref ;
+ // MG-Adapt
+ bloc = addPreference( tr( "ADAPT_PREF_MG_ADAPT" ), adaptTab );
+ setPreferenceProperty( bloc, "columns", 1 );
+ pref = addPreference( tr( "ADAPT_PREF_MG_ADAPT_FILE_MAILLAGE_OUT" ), bloc, LightApp_Preferences::Bool, "HOMARD", "mg_adapt_file_mesh_out" );
+ pref = addPreference( tr( "ADAPT_PREF_MG_ADAPT_PUBLICATION_MAILLAGE_OUT" ), bloc, LightApp_Preferences::Bool, "HOMARD", "mg_adapt_publish_mesh_out" );
+ pref = addPreference( tr( "ADAPT_PREF_MG_ADAPT_SIZE_MAP" ), bloc, LightApp_Preferences::Selector, "HOMARD", "mg_adapt_size_map" );
+ QStringList aListOfSizeMap;
+ aListOfSizeMap << tr( "ADAPT_PREF_MG_ADAPT_SIZE_MAP_LOCAL" );
+ aListOfSizeMap << tr( "ADAPT_PREF_MG_ADAPT_SIZE_MAP_BACKGROUND" );
+ aListOfSizeMap << tr( "ADAPT_PREF_NONE" );;
+ setPreferenceProperty( pref, "strings", aListOfSizeMap );
+ pref = addPreference( tr( "ADAPT_PREF_MG_ADAPT_TIME_STEP" ), bloc, LightApp_Preferences::Selector, "HOMARD", "mg_adapt_time_step" );
+ QStringList aListOfTimeStep;
+ aListOfTimeStep << tr( "ADAPT_PREF_NONE" );
+ aListOfTimeStep << tr( "ADAPT_PREF_MG_ADAPT_TIME_STEP_LAST" );
+ aListOfTimeStep << tr( "ADAPT_PREF_MG_ADAPT_TIME_STEP_C" );;
+ setPreferenceProperty( pref, "strings", aListOfTimeStep );
+#endif
+ // Adaptation - end
}
void SMESHGUI::preferencesChanged( const QString& sect, const QString& name )
{
if ( sect=="SMESH" ) {
- float sbX1 = 0.01, sbY1 = 0.01, sbW = 0.08, sbH = 0.08;
- float aTol = 1.00000009999999;
+ double sbX1 = 0.01, sbY1 = 0.01, sbW = 0.08, sbH = 0.08;
+ double aTol = 1.00000009999999;
std::string aWarning;
SUIT_ResourceMgr* aResourceMgr = SMESH::GetResourceMgr(this);
- if ( name== "selection_object_color" ||
- name=="selection_element_color" ||
- name== "highlight_color" ||
- name=="selection_precision_node" ||
- name=="selection_precision_element" ||
- name=="selection_precision_object" ||
- name=="selection_increment")
+ if ( name == "selection_object_color" ||
+ name == "selection_element_color" ||
+ name == "highlight_color" ||
+ name == "selection_precision_node" ||
+ name == "selection_precision_element" ||
+ name == "selection_precision_object" ||
+ name == "selection_increment")
{
SMESH::UpdateSelectionProp( this );
}
// to do : create operation here
switch( id )
{
- case SMESHOp::OpSplitBiQuadratic:
- op = new SMESHGUI_SplitBiQuadOp();
+ case SMESHOp::OpSplitBiQuadratic:
+ op = new SMESHGUI_SplitBiQuadOp();
+ break;
+ case SMESHOp::OpConvertMeshToQuadratic:
+ op = new SMESHGUI_ConvToQuadOp();
break;
- case SMESHOp::OpConvertMeshToQuadratic:
- op = new SMESHGUI_ConvToQuadOp();
+ case SMESHOp::OpCreateBoundaryElements: // create 2D mesh as boundary on 3D
+ op = new SMESHGUI_Make2DFrom3DOp();
break;
- case SMESHOp::OpCreateBoundaryElements: // create 2D mesh as boundary on 3D
- op = new SMESHGUI_Make2DFrom3DOp();
+ case SMESHOp::OpCreateDualMesh:
+ op = new SMESHGUI_CreateDualMeshOp();
break;
- case SMESHOp::OpReorientFaces:
- op = new SMESHGUI_ReorientFacesOp();
- break;
- case SMESHOp::OpCreateMesh:
- op = new SMESHGUI_MeshOp( true, true );
+ case SMESHOp::OpCreate2DElements:
+ op = new SMESHGUI_MakeFull2DFrom3DOp();
+ break;
+ case SMESHOp::OpReorientFaces:
+ op = new SMESHGUI_ReorientFacesOp();
break;
- case SMESHOp::OpCreateSubMesh:
- op = new SMESHGUI_MeshOp( true, false );
+ case SMESHOp::OpCreateMesh:
+ op = new SMESHGUI_MeshOp( true, true );
break;
- case SMESHOp::OpEditMeshOrSubMesh:
- case SMESHOp::OpEditMesh:
- case SMESHOp::OpEditSubMesh:
- op = new SMESHGUI_MeshOp( false );
+ case SMESHOp::OpCreateSubMesh:
+ op = new SMESHGUI_MeshOp( true, false );
break;
- case SMESHOp::OpCompute:
- case SMESHOp::OpComputeSubMesh:
- op = new SMESHGUI_ComputeOp();
+ case SMESHOp::OpEditMeshOrSubMesh:
+ case SMESHOp::OpEditMesh:
+ case SMESHOp::OpEditSubMesh:
+ op = new SMESHGUI_MeshOp( false );
break;
- case SMESHOp::OpPreCompute:
- op = new SMESHGUI_PrecomputeOp();
+ case SMESHOp::OpCompute:
+ case SMESHOp::OpComputeSubMesh:
+ op = new SMESHGUI_ComputeOp();
break;
- case SMESHOp::OpEvaluate:
- op = new SMESHGUI_EvaluateOp();
+ case SMESHOp::OpShowErrors:
+ op = new SMESHGUI_ShowErrorsOp();
break;
- case SMESHOp::OpMeshOrder:
- op = new SMESHGUI_MeshOrderOp();
+ case SMESHOp::OpPreCompute:
+ op = new SMESHGUI_PrecomputeOp();
break;
- case SMESHOp::OpCreateGeometryGroup:
- op = new SMESHGUI_GroupOnShapeOp();
- break;
- case SMESHOp::OpFindElementByPoint:
- op = new SMESHGUI_FindElemByPointOp();
- break;
- case SMESHOp::OpMoveNode: // Make mesh pass through point
- op = new SMESHGUI_MakeNodeAtPointOp();
- break;
- case SMESHOp::OpElem0DOnElemNodes: // Create 0D elements on all nodes
- op = new SMESHGUI_Add0DElemsOnAllNodesOp();
- break;
- default:
+ case SMESHOp::OpEvaluate:
+ op = new SMESHGUI_EvaluateOp();
+ break;
+ case SMESHOp::OpMeshOrder:
+ op = new SMESHGUI_MeshOrderOp();
+ break;
+ case SMESHOp::OpCreateGeometryGroup:
+ op = new SMESHGUI_GroupOnShapeOp();
+ break;
+ case SMESHOp::OpFindElementByPoint:
+ op = new SMESHGUI_FindElemByPointOp();
+ break;
+ case SMESHOp::OpMoveNode: // Make mesh pass through point
+ op = new SMESHGUI_MakeNodeAtPointOp();
+ break;
+ case SMESHOp::OpMoveNodeInteractive: // Make mesh pass through point / by mouse
+ op = new SMESHGUI_MakeNodeAtPointOp( 2 );
+ break;
+ case SMESHOp::OpRemoveNodeWithReconn:
+ op = new SMESHGUI_RemoveNodeReconnectionOp();
+ break;
+ case SMESHOp::OpSplitEdgeInteract:
+ op = new SMESHGUI_AddNodeOnSegmentOp();
+ break;
+ case SMESHOp::OpSplitFaceInteract:
+ op = new SMESHGUI_AddNodeOnFaceOp();
+ break;
+ case SMESHOp::OpElem0DOnElemNodes: // Create 0D elements on all nodes
+ op = new SMESHGUI_Add0DElemsOnAllNodesOp();
+ break;
+ default:
break;
}
* \brief Store visual parameters
*
* This method is called just before the study document is saved.
- * Store visual parameters in AttributeParameter attribue(s)
+ * Store visual parameters in AttributeParameter attribute(s)
*/
void SMESHGUI::storeVisualParameters (int savePoint)
{
* \brief Restore visual parameters
*
* This method is called after the study document is opened.
- * Restore visual parameters from AttributeParameter attribue(s)
+ * Restore visual parameters from AttributeParameter attribute(s)
*/
void SMESHGUI::restoreVisualParameters (int savePoint)
{
// componentName is used for encoding of entries when storing them in IParameters
std::string componentName = myComponentSMESH->ComponentDataType();
- //_PTR(SComponent) aSComponent = studyDS->FindComponent("GEOM");
- //if (!aSComponent) return;
// IParameters
_PTR(AttributeParameter) ap = studyDS->GetModuleParameters("Interface Applicative",
aPlaneData.Mode = aPropertyValueList[0].toInt( &ok );
if( !ok )
continue;
-
+
ok = false;
aPlaneData.isOpenGLClipping = aPropertyValueList[1].toInt( &ok );
if( !ok )
// Clipping
else if (paramNameStr.startsWith("ClippingPlane")) {
QStringList vals = val.split(gDigitsSep, QString::SkipEmptyParts);
- // old format - val looks like "Off" or "1:0:0:0.5:0:0"
+ // old format - val looks like "Off" or "1:0:0:0.5:0:0"
// (mode(relative), is OpenGL clipping plane, orientation, distance, two angles)
- // or "0:1:1:10.5:1.0:1.0:15.0:10.0:10.0"
+ // or "0:1:1:10.5:1.0:1.0:15.0:10.0:10.0"
// (mode(absolute), is OpenGL clipping plane, orientation, base point(x, y, z), direction (dx, dy, dz))
// new format - val looks like "Off" or "0" (plane id)
// (note: in new format "Off" value is used only for consistency,
break;
}
}
-
+
}
}
-
+
// update all VTK views
QList<SUIT_ViewManager*> lst;
while( vtkActor* aVTKActor = anAllActors->GetNextActor() )
if( SMESH_Actor* anActor = SMESH_Actor::SafeDownCast( aVTKActor ) )
anActor->SetOpenGLClippingPlane();
-
+
vtkView->getRenderer()->ResetCameraClippingRange();
vtkView->Repaint();
}
name = SMESH::fromUtf8(obj->GetName());
if ( name.isEmpty() )
return;
-
+
if ( data.last() == "stop" )
application()->putInfo( tr( "MESH_LOADING_MSG_FINISHED" ).arg( name ) );
else
return false;
SalomeApp_DataObject* obj = dynamic_cast<SalomeApp_DataObject*>(appStudy->findObjectByEntry(entry));
-
+
if(!obj)
return false;
SalomeApp_Application* anApp = dynamic_cast<SalomeApp_Application*>( application() );
if( !anApp )
return false;
-
+
SalomeApp_Study* appStudy = dynamic_cast<SalomeApp_Study*>( anApp->activeStudy() );
if(!appStudy)
return false;
-
+
_PTR(Study) aStudy = appStudy->studyDS();
-
+
if(!aStudy)
return false;
-
+
bool aLocked = (_PTR(AttributeStudyProperties)(appStudy->studyDS()->GetProperties()))->IsLocked();
if ( aLocked ) {
SUIT_MessageBox::warning ( anApp->desktop(), QObject::tr("WRN_WARNING"), QObject::tr("WRN_STUDY_LOCKED") );
