salome.sg.updateObjBrowser(1)
\endcode
+\section tui_bare_border_faces Bare border faces
+
+\code
+from smesh import *
+SetCurrentStudy(salome.myStudy)
+
+box = geompy.MakeBoxDXDYDZ(100, 100, 100)
+geompy.addToStudy( box, "box" )
+
+mesh = smesh.Mesh(box)
+mesh.Segment().NumberOfSegments(3)
+mesh.Quadrangle()
+mesh.Compute()
+
+# remove 2 faces
+allFaces = mesh.GetElementsByType(FACE)
+mesh.RemoveElements( allFaces[0:2])
+
+bareGroup = mesh.MakeGroup("bare faces", FACE, FT_BareBorderFace)
+assert(bareGroup.Size() == 3)
+\endcode
+
+\section tui_bare_border_volumes Bare border volumes
+
+\code
+from smesh import *
+SetCurrentStudy(salome.myStudy)
+
+box = geompy.MakeBoxDXDYDZ(100, 30, 10)
+# the smallest face of the box
+face = geompy.SubShapeAllSorted( box, geompy.ShapeType["FACE"])[0]
+
+geompy.addToStudy( box, "box" )
+geompy.addToStudyInFather( box, face, "face" )
+
+mesh = Mesh(box)
+mesh.AutomaticHexahedralization();
+
+# remove half of mesh faces from the smallest face
+faceFaces = mesh.GetSubMeshElementsId(face)
+faceToRemove = faceFaces[: len(faceFaces)/2]
+mesh.RemoveElements( faceToRemove )
+
+# make a group of volumes missing the removed faces
+bareGroup = mesh.MakeGroup("bare volumes", VOLUME, FT_BareBorderVolume)
+assert(bareGroup.Size() == len( faceToRemove))
+\endcode
+
+\section tui_over_constrained_faces Over-constrained faces
+\code
+from smesh import *
+SetCurrentStudy(salome.myStudy)
+
+mesh = Mesh()
+faceFilter = GetFilter(FACE,FT_OverConstrainedFace)
+
+#make an edge
+n1 = mesh.AddNode(0,0,0)
+n2 = mesh.AddNode(10,0,0)
+edge = mesh.AddEdge([n1,n2])
+assert( not mesh.GetIdsFromFilter( faceFilter ))
+
+# make faces
+mesh.ExtrusionSweep([edge], MakeDirStruct(0,7,0), 5)
+assert( 2 == len( mesh.GetIdsFromFilter( faceFilter )))
+\endcode
+
+\section tui_over_constrained_volumes Over-constrained volumes
+\code
+from smesh import *
+SetCurrentStudy(salome.myStudy)
+
+mesh = Mesh()
+volumeFilter = GetFilter(VOLUME,FT_OverConstrainedVolume)
+
+# make volumes by extrusion of one face
+n1 = mesh.AddNode(0,0,0)
+n2 = mesh.AddNode(10,0,0)
+edge = mesh.AddEdge([n1,n2])
+mesh.ExtrusionSweep([edge], MakeDirStruct(0,7,0), 1)
+mesh.ExtrusionSweep( mesh.GetElementsByType(FACE), MakeDirStruct(0,0,5), 7)
+assert( 2 == len( mesh.GetIdsFromFilter( volumeFilter )))
+\endcode
+
\section tui_length_2d Length 2D
\code
salome.sg.updateObjBrowser(1)
\endcode
+\section tui_max_element_length_2d Element Diameter 2D
+
+\code
+import SMESH_mechanic
+
+smesh = SMESH_mechanic.smesh
+mesh = SMESH_mechanic.mesh
+salome = SMESH_mechanic.salome
+
+# Criterion : ELEMENT DIAMETER 2D > 10
+mel_2d_margin = 10
+
+aFilter = smesh.GetFilter(smesh.FACE, smesh.FT_MaxElementLength2D, smesh.FT_MoreThan, mel_2d_margin)
+
+anIds = mesh.GetIdsFromFilter(aFilter)
+
+# print the result
+print "Criterion: Element Diameter 2D Ratio > ", mel_2d_margin, " Nb = ", len(anIds)
+j = 1
+for i in range(len(anIds)):
+ if j > 20: j = 1; print ""
+ print anIds[i],
+ j = j + 1
+ pass
+print ""
+
+# create a group
+aGroup = mesh.CreateEmptyGroup(smesh.FACE, "Element Diameter 2D > " + `mel_2d_margin`)
+aGroup.Add(anIds)
+
+salome.sg.updateObjBrowser(1)
+\endcode
+
\section tui_aspect_ratio_3d Aspect Ratio 3D
\code
salome.sg.updateObjBrowser(1)
\endcode
+\section tui_max_element_length_3d Element Diameter 3D
+
+\code
+import SMESH_mechanic_tetra
+
+smesh = SMESH_mechanic_tetra.smesh
+mesh = SMESH_mechanic_tetra.mesh
+salome = SMESH_mechanic_tetra.salome
+
+# Criterion : ELEMENT DIAMETER 3D > 10
+mel_3d_margin = 10
+
+aFilter = smesh.GetFilter(smesh.FACE, smesh.FT_MaxElementLength3D, smesh.FT_MoreThan, mel_3d_margin)
+
+anIds = mesh.GetIdsFromFilter(aFilter)
+
+# print the result
+print "Criterion: Element Diameter 3D Ratio > ", mel_3d_margin, " Nb = ", len(anIds)
+j = 1
+for i in range(len(anIds)):
+ if j > 20: j = 1; print ""
+ print anIds[i],
+ j = j + 1
+ pass
+print ""
+
+# create a group
+aGroup = mesh.CreateEmptyGroup(smesh.FACE, "Element Diameter 3D > " + `mel_3d_margin`)
+aGroup.Add(anIds)
+
+salome.sg.updateObjBrowser(1)
+\endcode
+
*/
